summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/s3c2410.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/s3c2410.c')
-rw-r--r--drivers/mtd/nand/s3c2410.c297
1 files changed, 161 insertions, 136 deletions
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index d05e9b97947..891e3a1b911 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -1,17 +1,24 @@
/* linux/drivers/mtd/nand/s3c2410.c
*
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2004,2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/SWLINUX/
+ * Ben Dooks <ben@simtec.co.uk>
*
- * Samsung S3C2410 NAND driver
+ * Samsung S3C2410/S3C240 NAND driver
*
* Changelog:
* 21-Sep-2004 BJD Initial version
* 23-Sep-2004 BJD Mulitple device support
* 28-Sep-2004 BJD Fixed ECC placement for Hardware mode
* 12-Oct-2004 BJD Fixed errors in use of platform data
+ * 18-Feb-2005 BJD Fix sparse errors
+ * 14-Mar-2005 BJD Applied tglx's code reduction patch
+ * 02-May-2005 BJD Fixed s3c2440 support
+ * 02-May-2005 BJD Reduced hwcontrol decode
+ * 20-Jun-2005 BJD Updated s3c2440 support, fixed timing bug
+ * 08-Jul-2005 BJD Fix OOPS when no platform data supplied
*
- * $Id: s3c2410.c,v 1.7 2005/01/05 18:05:14 dwmw2 Exp $
+ * $Id: s3c2410.c,v 1.14 2005/07/06 20:05:06 bjd Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -69,10 +76,10 @@ static int hardware_ecc = 0;
*/
static struct nand_oobinfo nand_hw_eccoob = {
- .useecc = MTD_NANDECC_AUTOPLACE,
- .eccbytes = 3,
- .eccpos = {0, 1, 2 },
- .oobfree = { {8, 8} }
+ .useecc = MTD_NANDECC_AUTOPLACE,
+ .eccbytes = 3,
+ .eccpos = {0, 1, 2 },
+ .oobfree = { {8, 8} }
};
/* controller and mtd information */
@@ -99,8 +106,10 @@ struct s3c2410_nand_info {
struct device *device;
struct resource *area;
struct clk *clk;
- void *regs;
+ void __iomem *regs;
int mtd_count;
+
+ unsigned char is_s3c2440;
};
/* conversion functions */
@@ -165,12 +174,12 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
/* calculate the timing information for the controller */
if (plat != NULL) {
- tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 8);
+ tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4);
twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8);
twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8);
} else {
/* default timings */
- tacls = 8;
+ tacls = 4;
twrph0 = 8;
twrph1 = 8;
}
@@ -185,10 +194,16 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
to_ns(twrph0, clkrate),
to_ns(twrph1, clkrate));
- cfg = S3C2410_NFCONF_EN;
- cfg |= S3C2410_NFCONF_TACLS(tacls-1);
- cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1);
- cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1);
+ if (!info->is_s3c2440) {
+ cfg = S3C2410_NFCONF_EN;
+ cfg |= S3C2410_NFCONF_TACLS(tacls-1);
+ cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1);
+ cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1);
+ } else {
+ cfg = S3C2440_NFCONF_TACLS(tacls-1);
+ cfg |= S3C2440_NFCONF_TWRPH0(twrph0-1);
+ cfg |= S3C2440_NFCONF_TWRPH1(twrph1-1);
+ }
pr_debug(PFX "NF_CONF is 0x%lx\n", cfg);
@@ -203,17 +218,22 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
struct s3c2410_nand_info *info;
struct s3c2410_nand_mtd *nmtd;
struct nand_chip *this = mtd->priv;
+ void __iomem *reg;
unsigned long cur;
+ unsigned long bit;
nmtd = this->priv;
info = nmtd->info;
- cur = readl(info->regs + S3C2410_NFCONF);
+ bit = (info->is_s3c2440) ? S3C2440_NFCONT_nFCE : S3C2410_NFCONF_nFCE;
+ reg = info->regs+((info->is_s3c2440) ? S3C2440_NFCONT:S3C2410_NFCONF);
+
+ cur = readl(reg);
if (chip == -1) {
- cur |= S3C2410_NFCONF_nFCE;
+ cur |= bit;
} else {
- if (chip > nmtd->set->nr_chips) {
+ if (nmtd->set != NULL && chip > nmtd->set->nr_chips) {
printk(KERN_ERR PFX "chip %d out of range\n", chip);
return;
}
@@ -223,143 +243,76 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
(info->platform->select_chip)(nmtd->set, chip);
}
- cur &= ~S3C2410_NFCONF_nFCE;
+ cur &= ~bit;
}
- writel(cur, info->regs + S3C2410_NFCONF);
+ writel(cur, reg);
}
-/* command and control functions */
+/* command and control functions
+ *
+ * Note, these all use tglx's method of changing the IO_ADDR_W field
+ * to make the code simpler, and use the nand layer's code to issue the
+ * command and address sequences via the proper IO ports.
+ *
+*/
static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
- unsigned long cur;
+ struct nand_chip *chip = mtd->priv;
switch (cmd) {
case NAND_CTL_SETNCE:
- cur = readl(info->regs + S3C2410_NFCONF);
- cur &= ~S3C2410_NFCONF_nFCE;
- writel(cur, info->regs + S3C2410_NFCONF);
- break;
-
case NAND_CTL_CLRNCE:
- cur = readl(info->regs + S3C2410_NFCONF);
- cur |= S3C2410_NFCONF_nFCE;
- writel(cur, info->regs + S3C2410_NFCONF);
+ printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__);
break;
- /* we don't need to implement these */
case NAND_CTL_SETCLE:
- case NAND_CTL_CLRCLE:
+ chip->IO_ADDR_W = info->regs + S3C2410_NFCMD;
+ break;
+
case NAND_CTL_SETALE:
- case NAND_CTL_CLRALE:
- pr_debug(PFX "s3c2410_nand_hwcontrol(%d) unusedn", cmd);
+ chip->IO_ADDR_W = info->regs + S3C2410_NFADDR;
+ break;
+
+ /* NAND_CTL_CLRCLE: */
+ /* NAND_CTL_CLRALE: */
+ default:
+ chip->IO_ADDR_W = info->regs + S3C2410_NFDATA;
break;
}
}
-/* s3c2410_nand_command
- *
- * This function implements sending commands and the relevant address
- * information to the chip, via the hardware controller. Since the
- * S3C2410 generates the correct ALE/CLE signaling automatically, we
- * do not need to use hwcontrol.
-*/
+/* command and control functions */
-static void s3c2410_nand_command (struct mtd_info *mtd, unsigned command,
- int column, int page_addr)
+static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd)
{
- register struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
- register struct nand_chip *this = mtd->priv;
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ struct nand_chip *chip = mtd->priv;
- /*
- * Write out the command to the device.
- */
- if (command == NAND_CMD_SEQIN) {
- int readcmd;
-
- if (column >= mtd->oobblock) {
- /* OOB area */
- column -= mtd->oobblock;
- readcmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- /* First 256 bytes --> READ0 */
- readcmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- readcmd = NAND_CMD_READ1;
- }
-
- writeb(readcmd, info->regs + S3C2410_NFCMD);
- }
- writeb(command, info->regs + S3C2410_NFCMD);
+ switch (cmd) {
+ case NAND_CTL_SETNCE:
+ case NAND_CTL_CLRNCE:
+ printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__);
+ break;
- /* Set ALE and clear CLE to start address cycle */
+ case NAND_CTL_SETCLE:
+ chip->IO_ADDR_W = info->regs + S3C2440_NFCMD;
+ break;
- if (column != -1 || page_addr != -1) {
+ case NAND_CTL_SETALE:
+ chip->IO_ADDR_W = info->regs + S3C2440_NFADDR;
+ break;
- /* Serially input address */
- if (column != -1) {
- /* Adjust columns for 16 bit buswidth */
- if (this->options & NAND_BUSWIDTH_16)
- column >>= 1;
- writeb(column, info->regs + S3C2410_NFADDR);
- }
- if (page_addr != -1) {
- writeb((unsigned char) (page_addr), info->regs + S3C2410_NFADDR);
- writeb((unsigned char) (page_addr >> 8), info->regs + S3C2410_NFADDR);
- /* One more address cycle for higher density devices */
- if (this->chipsize & 0x0c000000)
- writeb((unsigned char) ((page_addr >> 16) & 0x0f),
- info->regs + S3C2410_NFADDR);
- }
- /* Latch in address */
- }
-
- /*
- * program and erase have their own busy handlers
- * status and sequential in needs no delay
- */
- switch (command) {
-
- case NAND_CMD_PAGEPROG:
- case NAND_CMD_ERASE1:
- case NAND_CMD_ERASE2:
- case NAND_CMD_SEQIN:
- case NAND_CMD_STATUS:
- return;
-
- case NAND_CMD_RESET:
- if (this->dev_ready)
- break;
-
- udelay(this->chip_delay);
- writeb(NAND_CMD_STATUS, info->regs + S3C2410_NFCMD);
-
- while ( !(this->read_byte(mtd) & 0x40));
- return;
-
- /* This applies to read commands */
+ /* NAND_CTL_CLRCLE: */
+ /* NAND_CTL_CLRALE: */
default:
- /*
- * If we don't have access to the busy pin, we apply the given
- * command delay
- */
- if (!this->dev_ready) {
- udelay (this->chip_delay);
- return;
- }
+ chip->IO_ADDR_W = info->regs + S3C2440_NFDATA;
+ break;
}
-
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
- ndelay (100);
- /* wait until command is processed */
- while (!this->dev_ready(mtd));
}
-
/* s3c2410_nand_devready()
*
* returns 0 if the nand is busy, 1 if it is ready
@@ -369,9 +322,12 @@ static int s3c2410_nand_devready(struct mtd_info *mtd)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ if (info->is_s3c2440)
+ return readb(info->regs + S3C2440_NFSTAT) & S3C2440_NFSTAT_READY;
return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY;
}
+
/* ECC handling functions */
static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
@@ -394,6 +350,12 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
return -1;
}
+/* ECC functions
+ *
+ * These allow the s3c2410 and s3c2440 to use the controller's ECC
+ * generator block to ECC the data as it passes through]
+*/
+
static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
@@ -404,6 +366,15 @@ static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
writel(ctrl, info->regs + S3C2410_NFCONF);
}
+static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ctrl;
+
+ ctrl = readl(info->regs + S3C2440_NFCONT);
+ writel(ctrl | S3C2440_NFCONT_INITECC, info->regs + S3C2440_NFCONT);
+}
+
static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd,
const u_char *dat, u_char *ecc_code)
{
@@ -420,7 +391,26 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd,
}
-/* over-ride the standard functions for a little more speed? */
+static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_code)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ecc = readl(info->regs + S3C2440_NFMECC0);
+
+ ecc_code[0] = ecc;
+ ecc_code[1] = ecc >> 8;
+ ecc_code[2] = ecc >> 16;
+
+ pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n",
+ ecc_code[0], ecc_code[1], ecc_code[2]);
+
+ return 0;
+}
+
+
+/* over-ride the standard functions for a little more speed. We can
+ * use read/write block to move the data buffers to/from the controller
+*/
static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
@@ -523,11 +513,10 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
{
struct nand_chip *chip = &nmtd->chip;
- chip->IO_ADDR_R = (char *)info->regs + S3C2410_NFDATA;
- chip->IO_ADDR_W = (char *)info->regs + S3C2410_NFDATA;
+ chip->IO_ADDR_R = info->regs + S3C2410_NFDATA;
+ chip->IO_ADDR_W = info->regs + S3C2410_NFDATA;
chip->hwcontrol = s3c2410_nand_hwcontrol;
chip->dev_ready = s3c2410_nand_devready;
- chip->cmdfunc = s3c2410_nand_command;
chip->write_buf = s3c2410_nand_write_buf;
chip->read_buf = s3c2410_nand_read_buf;
chip->select_chip = s3c2410_nand_select_chip;
@@ -536,6 +525,12 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
chip->options = 0;
chip->controller = &info->controller;
+ if (info->is_s3c2440) {
+ chip->IO_ADDR_R = info->regs + S3C2440_NFDATA;
+ chip->IO_ADDR_W = info->regs + S3C2440_NFDATA;
+ chip->hwcontrol = s3c2440_nand_hwcontrol;
+ }
+
nmtd->info = info;
nmtd->mtd.priv = chip;
nmtd->set = set;
@@ -546,6 +541,11 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
chip->calculate_ecc = s3c2410_nand_calculate_ecc;
chip->eccmode = NAND_ECC_HW3_512;
chip->autooob = &nand_hw_eccoob;
+
+ if (info->is_s3c2440) {
+ chip->enable_hwecc = s3c2440_nand_enable_hwecc;
+ chip->calculate_ecc = s3c2440_nand_calculate_ecc;
+ }
} else {
chip->eccmode = NAND_ECC_SOFT;
}
@@ -559,7 +559,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
* nand layer to look for devices
*/
-static int s3c2410_nand_probe(struct device *dev)
+static int s3c24xx_nand_probe(struct device *dev, int is_s3c2440)
{
struct platform_device *pdev = to_platform_device(dev);
struct s3c2410_platform_nand *plat = to_nand_plat(dev);
@@ -585,6 +585,7 @@ static int s3c2410_nand_probe(struct device *dev)
dev_set_drvdata(dev, info);
spin_lock_init(&info->controller.lock);
+ init_waitqueue_head(&info->controller.wq);
/* get the clock source and enable it */
@@ -600,7 +601,8 @@ static int s3c2410_nand_probe(struct device *dev)
/* allocate and map the resource */
- res = pdev->resource; /* assume that the flash has one resource */
+ /* currently we assume we have the one resource */
+ res = pdev->resource;
size = res->end - res->start + 1;
info->area = request_mem_region(res->start, size, pdev->name);
@@ -611,9 +613,10 @@ static int s3c2410_nand_probe(struct device *dev)
goto exit_error;
}
- info->device = dev;
- info->platform = plat;
- info->regs = ioremap(res->start, size);
+ info->device = dev;
+ info->platform = plat;
+ info->regs = ioremap(res->start, size);
+ info->is_s3c2440 = is_s3c2440;
if (info->regs == NULL) {
printk(KERN_ERR PFX "cannot reserve register region\n");
@@ -678,6 +681,18 @@ static int s3c2410_nand_probe(struct device *dev)
return err;
}
+/* driver device registration */
+
+static int s3c2410_nand_probe(struct device *dev)
+{
+ return s3c24xx_nand_probe(dev, 0);
+}
+
+static int s3c2440_nand_probe(struct device *dev)
+{
+ return s3c24xx_nand_probe(dev, 1);
+}
+
static struct device_driver s3c2410_nand_driver = {
.name = "s3c2410-nand",
.bus = &platform_bus_type,
@@ -685,14 +700,24 @@ static struct device_driver s3c2410_nand_driver = {
.remove = s3c2410_nand_remove,
};
+static struct device_driver s3c2440_nand_driver = {
+ .name = "s3c2440-nand",
+ .bus = &platform_bus_type,
+ .probe = s3c2440_nand_probe,
+ .remove = s3c2410_nand_remove,
+};
+
static int __init s3c2410_nand_init(void)
{
- printk("S3C2410 NAND Driver, (c) 2004 Simtec Electronics\n");
+ printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n");
+
+ driver_register(&s3c2440_nand_driver);
return driver_register(&s3c2410_nand_driver);
}
static void __exit s3c2410_nand_exit(void)
{
+ driver_unregister(&s3c2440_nand_driver);
driver_unregister(&s3c2410_nand_driver);
}
@@ -701,4 +726,4 @@ module_exit(s3c2410_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("S3C2410 MTD NAND driver");
+MODULE_DESCRIPTION("S3C24XX MTD NAND driver");
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-19 17:31:23 +0000