diff options
Diffstat (limited to 'drivers/char')
138 files changed, 11317 insertions, 7579 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 46662959477..47c6be84fc8 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -194,17 +194,6 @@ config MOXA_INTELLIO module will be called moxa. config MOXA_SMARTIO - tristate "Moxa SmartIO support (OBSOLETE)" - depends on SERIAL_NONSTANDARD - help - Say Y here if you have a Moxa SmartIO multiport serial card. - - This driver can also be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called mxser. If you want to do that, say M - here. - -config MOXA_SMARTIO_NEW tristate "Moxa SmartIO support v. 2.0" depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) help @@ -215,7 +204,7 @@ config MOXA_SMARTIO_NEW changes finally resulting in PCI probing. This driver can also be built as a module. The module will be called - mxser_new. If you want to do that, say M here. + mxser. If you want to do that, say M here. config ISI tristate "Multi-Tech multiport card support (EXPERIMENTAL)" @@ -276,7 +265,7 @@ config N_HDLC config RISCOM8 tristate "SDL RISCom/8 card support" - depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP + depends on SERIAL_NONSTANDARD help This is a driver for the SDL Communications RISCom/8 multiport card, which gives you many serial ports. You would need something like @@ -765,7 +754,7 @@ config JS_RTC config SGI_DS1286 tristate "SGI DS1286 RTC support" - depends on SGI_IP22 + depends on SGI_HAS_DS1286 help If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you @@ -841,6 +830,16 @@ config DTLK To compile this driver as a module, choose M here: the module will be called dtlk. +config XILINX_HWICAP + tristate "Xilinx HWICAP Support" + depends on XILINX_VIRTEX + help + This option enables support for Xilinx Internal Configuration + Access Port (ICAP) driver. The ICAP is used on Xilinx Virtex + FPGA platforms to partially reconfigure the FPGA at runtime. + + If unsure, say N. + config R3964 tristate "Siemens R3964 line discipline" ---help--- @@ -876,7 +875,7 @@ config SONYPI Device which can be found in many (all ?) Sony Vaio laptops. If you have one of those laptops, read - <file:Documentation/sonypi.txt>, and say Y or M here. + <file:Documentation/laptops/sonypi.txt>, and say Y or M here. To compile this driver as a module, choose M here: the module will be called sonypi. diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 96fc01eddef..5407b761561 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_MOXA_INTELLIO) += moxa.o obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o obj-$(CONFIG_MOXA_SMARTIO) += mxser.o -obj-$(CONFIG_MOXA_SMARTIO_NEW) += mxser_new.o obj-$(CONFIG_COMPUTONE) += ip2/ obj-$(CONFIG_RISCOM8) += riscom8.o obj-$(CONFIG_ISI) += isicom.o @@ -77,6 +76,7 @@ obj-$(CONFIG_EFI_RTC) += efirtc.o obj-$(CONFIG_SGI_DS1286) += ds1286.o obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o obj-$(CONFIG_DS1302) += ds1302.o +obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap/ ifeq ($(CONFIG_GENERIC_NVRAM),y) obj-$(CONFIG_NVRAM) += generic_nvram.o else diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h index b83824c4132..c69f79598e4 100644 --- a/drivers/char/agp/agp.h +++ b/drivers/char/agp/agp.h @@ -117,7 +117,8 @@ struct agp_bridge_driver { void (*free_by_type)(struct agp_memory *); void *(*agp_alloc_page)(struct agp_bridge_data *); void (*agp_destroy_page)(void *, int flags); - int (*agp_type_to_mask_type) (struct agp_bridge_data *, int); + int (*agp_type_to_mask_type) (struct agp_bridge_data *, int); + void (*chipset_flush)(struct agp_bridge_data *); }; struct agp_bridge_data { @@ -235,6 +236,9 @@ struct agp_bridge_data { #define I965_PGETBL_SIZE_512KB (0 << 1) #define I965_PGETBL_SIZE_256KB (1 << 1) #define I965_PGETBL_SIZE_128KB (2 << 1) +#define I965_PGETBL_SIZE_1MB (3 << 1) +#define I965_PGETBL_SIZE_2MB (4 << 1) +#define I965_PGETBL_SIZE_1_5MB (5 << 1) #define G33_PGETBL_SIZE_MASK (3 << 8) #define G33_PGETBL_SIZE_1M (1 << 8) #define G33_PGETBL_SIZE_2M (2 << 8) diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c index aa8f3a39a70..e77c17838c8 100644 --- a/drivers/char/agp/alpha-agp.c +++ b/drivers/char/agp/alpha-agp.c @@ -11,29 +11,28 @@ #include "agp.h" -static struct page *alpha_core_agp_vm_nopage(struct vm_area_struct *vma, - unsigned long address, - int *type) +static int alpha_core_agp_vm_fault(struct vm_area_struct *vma, + struct vm_fault *vmf) { alpha_agp_info *agp = agp_bridge->dev_private_data; dma_addr_t dma_addr; unsigned long pa; struct page *page; - dma_addr = address - vma->vm_start + agp->aperture.bus_base; + dma_addr = (unsigned long)vmf->virtual_address - vma->vm_start + + agp->aperture.bus_base; pa = agp->ops->translate(agp, dma_addr); if (pa == (unsigned long)-EINVAL) - return NULL; /* no translation */ + return VM_FAULT_SIGBUS; /* no translation */ /* * Get the page, inc the use count, and return it */ page = virt_to_page(__va(pa)); get_page(page); - if (type) - *type = VM_FAULT_MINOR; - return page; + vmf->page = page; + return 0; } static struct aper_size_info_fixed alpha_core_agp_sizes[] = @@ -42,7 +41,7 @@ static struct aper_size_info_fixed alpha_core_agp_sizes[] = }; struct vm_operations_struct alpha_core_agp_vm_ops = { - .nopage = alpha_core_agp_vm_nopage, + .fault = alpha_core_agp_vm_fault, }; diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c index 1405a42585e..87be46406da 100644 --- a/drivers/char/agp/amd-k7-agp.c +++ b/drivers/char/agp/amd-k7-agp.c @@ -436,10 +436,6 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev, return -ENODEV; } cap_ptr = pci_find_capability(gfxcard, PCI_CAP_ID_AGP); - if (!cap_ptr) { - pci_dev_put(gfxcard); - continue; - } } /* With so many variants of NVidia cards, it's simpler just diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c index 2720882e66f..b1bdd015165 100644 --- a/drivers/char/agp/backend.c +++ b/drivers/char/agp/backend.c @@ -43,7 +43,7 @@ * fix some real stupidity. It's only by chance we can bump * past 0.99 at all due to some boolean logic error. */ #define AGPGART_VERSION_MAJOR 0 -#define AGPGART_VERSION_MINOR 102 +#define AGPGART_VERSION_MINOR 103 static const struct agp_version agp_current_version = { .major = AGPGART_VERSION_MAJOR, diff --git a/drivers/char/agp/compat_ioctl.c b/drivers/char/agp/compat_ioctl.c index ecd4248861b..39275794fe6 100644 --- a/drivers/char/agp/compat_ioctl.c +++ b/drivers/char/agp/compat_ioctl.c @@ -273,6 +273,10 @@ long compat_agp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case AGPIOC_UNBIND32: ret_val = compat_agpioc_unbind_wrap(curr_priv, (void __user *) arg); break; + + case AGPIOC_CHIPSET_FLUSH32: + ret_val = agpioc_chipset_flush_wrap(curr_priv); + break; } ioctl_out: diff --git a/drivers/char/agp/compat_ioctl.h b/drivers/char/agp/compat_ioctl.h index 71939d63723..0c9678ac037 100644 --- a/drivers/char/agp/compat_ioctl.h +++ b/drivers/char/agp/compat_ioctl.h @@ -39,6 +39,7 @@ #define AGPIOC_DEALLOCATE32 _IOW (AGPIOC_BASE, 7, compat_int_t) #define AGPIOC_BIND32 _IOW (AGPIOC_BASE, 8, compat_uptr_t) #define AGPIOC_UNBIND32 _IOW (AGPIOC_BASE, 9, compat_uptr_t) +#define AGPIOC_CHIPSET_FLUSH32 _IO (AGPIOC_BASE, 10) struct agp_info32 { struct agp_version version; /* version of the driver */ @@ -101,5 +102,6 @@ void agp_free_memory_wrap(struct agp_memory *memory); struct agp_memory *agp_allocate_memory_wrap(size_t pg_count, u32 type); struct agp_memory *agp_find_mem_by_key(int key); struct agp_client *agp_find_client_by_pid(pid_t id); +int agpioc_chipset_flush_wrap(struct agp_file_private *priv); #endif /* _AGP_COMPAT_H */ diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index 7791e98de51..55d7a82bd07 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -689,7 +689,7 @@ static int agp_open(struct inode *inode, struct file *file) set_bit(AGP_FF_ALLOW_CLIENT, &priv->access_flags); priv->my_pid = current->pid; - if ((current->uid == 0) || (current->suid == 0)) { + if (capable(CAP_SYS_RAWIO)) { /* Root priv, can be controller */ set_bit(AGP_FF_ALLOW_CONTROLLER, &priv->access_flags); } @@ -960,6 +960,13 @@ static int agpioc_unbind_wrap(struct agp_file_private *priv, void __user *arg) return agp_unbind_memory(memory); } +int agpioc_chipset_flush_wrap(struct agp_file_private *priv) +{ + DBG(""); + agp_flush_chipset(agp_bridge); + return 0; +} + static int agp_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { @@ -1033,6 +1040,10 @@ static int agp_ioctl(struct inode *inode, struct file *file, case AGPIOC_UNBIND: ret_val = agpioc_unbind_wrap(curr_priv, (void __user *) arg); break; + + case AGPIOC_CHIPSET_FLUSH: + ret_val = agpioc_chipset_flush_wrap(curr_priv); + break; } ioctl_out: diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 1a4674ce0c7..7484bc759c4 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -80,6 +80,13 @@ static int agp_get_key(void) return -1; } +void agp_flush_chipset(struct agp_bridge_data *bridge) +{ + if (bridge->driver->chipset_flush) + bridge->driver->chipset_flush(bridge); +} +EXPORT_SYMBOL(agp_flush_chipset); + /* * Use kmalloc if possible for the page list. Otherwise fall back to * vmalloc. This speeds things up and also saves memory for small AGP diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 189efb6ef97..eeea50a1d22 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -14,8 +14,8 @@ #define PCI_DEVICE_ID_INTEL_E7221_IG 0x258a #define PCI_DEVICE_ID_INTEL_82946GZ_HB 0x2970 #define PCI_DEVICE_ID_INTEL_82946GZ_IG 0x2972 -#define PCI_DEVICE_ID_INTEL_82965G_1_HB 0x2980 -#define PCI_DEVICE_ID_INTEL_82965G_1_IG 0x2982 +#define PCI_DEVICE_ID_INTEL_82G35_HB 0x2980 +#define PCI_DEVICE_ID_INTEL_82G35_IG 0x2982 #define PCI_DEVICE_ID_INTEL_82965Q_HB 0x2990 #define PCI_DEVICE_ID_INTEL_82965Q_IG 0x2992 #define PCI_DEVICE_ID_INTEL_82965G_HB 0x29A0 @@ -32,13 +32,24 @@ #define PCI_DEVICE_ID_INTEL_Q35_IG 0x29B2 #define PCI_DEVICE_ID_INTEL_Q33_HB 0x29D0 #define PCI_DEVICE_ID_INTEL_Q33_IG 0x29D2 +#define PCI_DEVICE_ID_INTEL_IGD_HB 0x2A40 +#define PCI_DEVICE_ID_INTEL_IGD_IG 0x2A42 + +/* cover 915 and 945 variants */ +#define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GME_HB) #define IS_I965 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82946GZ_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965G_1_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965Q_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965G_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GM_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GME_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82G35_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965Q_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965G_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GM_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GME_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB) #define IS_G33 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G33_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \ @@ -71,9 +82,11 @@ extern int agp_memory_reserved; #define I915_GMCH_GMS_STOLEN_64M (0x7 << 4) #define G33_GMCH_GMS_STOLEN_128M (0x8 << 4) #define G33_GMCH_GMS_STOLEN_256M (0x9 << 4) +#define I915_IFPADDR 0x60 /* Intel 965G registers */ #define I965_MSAC 0x62 +#define I965_IFPADDR 0x70 /* Intel 7505 registers */ #define INTEL_I7505_APSIZE 0x74 @@ -115,6 +128,13 @@ static struct _intel_private { * popup and for the GTT. */ int gtt_entries; /* i830+ */ + union { + void __iomem *i9xx_flush_page; + void *i8xx_flush_page; + }; + struct page *i8xx_page; + struct resource ifp_resource; + int resource_valid; } intel_private; static int intel_i810_fetch_size(void) @@ -204,7 +224,7 @@ static void intel_i810_agp_enable(struct agp_bridge_data *bridge, u32 mode) /* Exists to support ARGB cursors */ static void *i8xx_alloc_pages(void) { - struct page * page; + struct page *page; page = alloc_pages(GFP_KERNEL | GFP_DMA32, 2); if (page == NULL) @@ -433,7 +453,7 @@ static void intel_i830_init_gtt_entries(void) static const int ddt[4] = { 0, 16, 32, 64 }; int size; /* reserved space (in kb) at the top of stolen memory */ - pci_read_config_word(agp_bridge->dev,I830_GMCH_CTRL,&gmch_ctrl); + pci_read_config_word(agp_bridge->dev, I830_GMCH_CTRL, &gmch_ctrl); if (IS_I965) { u32 pgetbl_ctl; @@ -453,6 +473,15 @@ static void intel_i830_init_gtt_entries(void) case I965_PGETBL_SIZE_512KB: size = 512; break; + case I965_PGETBL_SIZE_1MB: + size = 1024; + break; + case I965_PGETBL_SIZE_2MB: + size = 2048; + break; + case I965_PGETBL_SIZE_1_5MB: + size = 1024 + 512; + break; default: printk(KERN_INFO PFX "Unknown page table size, " "assuming 512KB\n"); @@ -523,26 +552,14 @@ static void intel_i830_init_gtt_entries(void) break; case I915_GMCH_GMS_STOLEN_48M: /* Check it's really I915G */ - if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GME_HB || - IS_I965 || IS_G33) + if (IS_I915 || IS_I965 || IS_G33) gtt_entries = MB(48) - KB(size); else gtt_entries = 0; break; case I915_GMCH_GMS_STOLEN_64M: /* Check it's really I915G */ - if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GME_HB || - IS_I965 || IS_G33) + if (IS_I915 || IS_I965 || IS_G33) gtt_entries = MB(64) - KB(size); else gtt_entries = 0; @@ -575,6 +592,45 @@ static void intel_i830_init_gtt_entries(void) intel_private.gtt_entries = gtt_entries; } +static void intel_i830_fini_flush(void) +{ + kunmap(intel_private.i8xx_page); + intel_private.i8xx_flush_page = NULL; + unmap_page_from_agp(intel_private.i8xx_page); + + __free_page(intel_private.i8xx_page); + intel_private.i8xx_page = NULL; +} + +static void intel_i830_setup_flush(void) +{ + /* return if we've already set the flush mechanism up */ + if (intel_private.i8xx_page) + return; + + intel_private.i8xx_page = alloc_page(GFP_KERNEL | __GFP_ZERO | GFP_DMA32); + if (!intel_private.i8xx_page) + return; + + /* make page uncached */ + map_page_into_agp(intel_private.i8xx_page); + + intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page); + if (!intel_private.i8xx_flush_page) + intel_i830_fini_flush(); +} + +static void intel_i830_chipset_flush(struct agp_bridge_data *bridge) +{ + unsigned int *pg = intel_private.i8xx_flush_page; + int i; + + for (i = 0; i < 256; i += 2) + *(pg + i) = i; + + wmb(); +} + /* The intel i830 automatically initializes the agp aperture during POST. * Use the memory already set aside for in the GTT. */ @@ -590,10 +646,10 @@ static int intel_i830_create_gatt_table(struct agp_bridge_data *bridge) num_entries = size->num_entries; agp_bridge->gatt_table_real = NULL; - pci_read_config_dword(intel_private.pcidev,I810_MMADDR,&temp); + pci_read_config_dword(intel_private.pcidev, I810_MMADDR, &temp); temp &= 0xfff80000; - intel_private.registers = ioremap(temp,128 * 4096); + intel_private.registers = ioremap(temp, 128 * 4096); if (!intel_private.registers) return -ENOMEM; @@ -633,7 +689,7 @@ static int intel_i830_fetch_size(void) return values[0].size; } - pci_read_config_word(agp_bridge->dev,I830_GMCH_CTRL,&gmch_ctrl); + pci_read_config_word(agp_bridge->dev, I830_GMCH_CTRL, &gmch_ctrl); if ((gmch_ctrl & I830_GMCH_MEM_MASK) == I830_GMCH_MEM_128M) { agp_bridge->previous_size = agp_bridge->current_size = (void *) values; @@ -657,12 +713,12 @@ static int intel_i830_configure(void) current_size = A_SIZE_FIX(agp_bridge->current_size); - pci_read_config_dword(intel_private.pcidev,I810_GMADDR,&temp); + pci_read_config_dword(intel_private.pcidev, I810_GMADDR, &temp); agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK); - pci_read_config_word(agp_bridge->dev,I830_GMCH_CTRL,&gmch_ctrl); + pci_read_config_word(agp_bridge->dev, I830_GMCH_CTRL, &gmch_ctrl); gmch_ctrl |= I830_GMCH_ENABLED; - pci_write_config_word(agp_bridge->dev,I830_GMCH_CTRL,gmch_ctrl); + pci_write_config_word(agp_bridge->dev, I830_GMCH_CTRL, gmch_ctrl); writel(agp_bridge->gatt_bus_addr|I810_PGETBL_ENABLED, intel_private.registers+I810_PGETBL_CTL); readl(intel_private.registers+I810_PGETBL_CTL); /* PCI Posting. */ @@ -675,6 +731,8 @@ static int intel_i830_configure(void) } global_cache_flush(); + + intel_i830_setup_flush(); return 0; } @@ -683,9 +741,10 @@ static void intel_i830_cleanup(void) iounmap(intel_private.registers); } -static int intel_i830_insert_entries(struct agp_memory *mem,off_t pg_start, int type) +static int intel_i830_insert_entries(struct agp_memory *mem, off_t pg_start, + int type) { - int i,j,num_entries; + int i, j, num_entries; void *temp; int ret = -EINVAL; int mask_type; @@ -697,10 +756,10 @@ static int intel_i830_insert_entries(struct agp_memory *mem,off_t pg_start, int num_entries = A_SIZE_FIX(temp)->num_entries; if (pg_start < intel_private.gtt_entries) { - printk (KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n", - pg_start,intel_private.gtt_entries); + printk(KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n", + pg_start, intel_private.gtt_entries); - printk (KERN_INFO PFX "Trying to insert into local/stolen memory\n"); + printk(KERN_INFO PFX "Trying to insert into local/stolen memory\n"); goto out_err; } @@ -738,8 +797,8 @@ out_err: return ret; } -static int intel_i830_remove_entries(struct agp_memory *mem,off_t pg_start, - int type) +static int intel_i830_remove_entries(struct agp_memory *mem, off_t pg_start, + int type) { int i; @@ -747,7 +806,7 @@ static int intel_i830_remove_entries(struct agp_memory *mem,off_t pg_start, return 0; if (pg_start < intel_private.gtt_entries) { - printk (KERN_INFO PFX "Trying to disable local/stolen memory\n"); + printk(KERN_INFO PFX "Trying to disable local/stolen memory\n"); return -EINVAL; } @@ -760,7 +819,7 @@ static int intel_i830_remove_entries(struct agp_memory *mem,off_t pg_start, return 0; } -static struct agp_memory *intel_i830_alloc_by_type(size_t pg_count,int type) +static struct agp_memory *intel_i830_alloc_by_type(size_t pg_count, int type) { if (type == AGP_PHYS_MEMORY) return alloc_agpphysmem_i8xx(pg_count, type); @@ -768,6 +827,95 @@ static struct agp_memory *intel_i830_alloc_by_type(size_t pg_count,int type) return NULL; } +static int intel_alloc_chipset_flush_resource(void) +{ + int ret; + ret = pci_bus_alloc_resource(agp_bridge->dev->bus, &intel_private.ifp_resource, PAGE_SIZE, + PAGE_SIZE, PCIBIOS_MIN_MEM, 0, + pcibios_align_resource, agp_bridge->dev); + + return ret; +} + +static void intel_i915_setup_chipset_flush(void) +{ + int ret; + u32 temp; + + pci_read_config_dword(agp_bridge->dev, I915_IFPADDR, &temp); + if (!(temp & 0x1)) { + intel_alloc_chipset_flush_resource(); + intel_private.resource_valid = 1; + pci_write_config_dword(agp_bridge->dev, I915_IFPADDR, (intel_private.ifp_resource.start & 0xffffffff) | 0x1); + } else { + temp &= ~1; + + intel_private.resource_valid = 1; + intel_private.ifp_resource.start = temp; + intel_private.ifp_resource.end = temp + PAGE_SIZE; + ret = request_resource(&iomem_resource, &intel_private.ifp_resource); + /* some BIOSes reserve this area in a pnp some don't */ + if (ret) + intel_private.resource_valid = 0; + } +} + +static void intel_i965_g33_setup_chipset_flush(void) +{ + u32 temp_hi, temp_lo; + int ret; + + pci_read_config_dword(agp_bridge->dev, I965_IFPADDR + 4, &temp_hi); + pci_read_config_dword(agp_bridge->dev, I965_IFPADDR, &temp_lo); + + if (!(temp_lo & 0x1)) { + + intel_alloc_chipset_flush_resource(); + + intel_private.resource_valid = 1; + pci_write_config_dword(agp_bridge->dev, I965_IFPADDR + 4, + upper_32_bits(intel_private.ifp_resource.start)); + pci_write_config_dword(agp_bridge->dev, I965_IFPADDR, (intel_private.ifp_resource.start & 0xffffffff) | 0x1); + } else { + u64 l64; + + temp_lo &= ~0x1; + l64 = ((u64)temp_hi << 32) | temp_lo; + + intel_private.resource_valid = 1; + intel_private.ifp_resource.start = l64; + intel_private.ifp_resource.end = l64 + PAGE_SIZE; + ret = request_resource(&iomem_resource, &intel_private.ifp_resource); + /* some BIOSes reserve this area in a pnp some don't */ + if (ret) + intel_private.resource_valid = 0; + } +} + +static void intel_i9xx_setup_flush(void) +{ + /* return if already configured */ + if (intel_private.ifp_resource.start) + return; + + /* setup a resource for this object */ + intel_private.ifp_resource.name = "Intel Flush Page"; + intel_private.ifp_resource.flags = IORESOURCE_MEM; + + /* Setup chipset flush for 915 */ + if (IS_I965 || IS_G33) { + intel_i965_g33_setup_chipset_flush(); + } else { + intel_i915_setup_chipset_flush(); + } + + if (intel_private.ifp_resource.start) { + intel_private.i9xx_flush_page = ioremap_nocache(intel_private.ifp_resource.start, PAGE_SIZE); + if (!intel_private.i9xx_flush_page) + printk(KERN_INFO "unable to ioremap flush page - no chipset flushing"); + } +} + static int intel_i915_configure(void) { struct aper_size_info_fixed *current_size; @@ -781,9 +929,9 @@ static int intel_i915_configure(void) agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK); - pci_read_config_word(agp_bridge->dev,I830_GMCH_CTRL,&gmch_ctrl); + pci_read_config_word(agp_bridge->dev, I830_GMCH_CTRL, &gmch_ctrl); gmch_ctrl |= I830_GMCH_ENABLED; - pci_write_config_word(agp_bridge->dev,I830_GMCH_CTRL,gmch_ctrl); + pci_write_config_word(agp_bridge->dev, I830_GMCH_CTRL, gmch_ctrl); writel(agp_bridge->gatt_bus_addr|I810_PGETBL_ENABLED, intel_private.registers+I810_PGETBL_CTL); readl(intel_private.registers+I810_PGETBL_CTL); /* PCI Posting. */ @@ -796,19 +944,34 @@ static int intel_i915_configure(void) } global_cache_flush(); + + intel_i9xx_setup_flush(); + return 0; } static void intel_i915_cleanup(void) { + if (intel_private.i9xx_flush_page) + iounmap(intel_private.i9xx_flush_page); + if (intel_private.resource_valid) + release_resource(&intel_private.ifp_resource); + intel_private.ifp_resource.start = 0; + intel_private.resource_valid = 0; iounmap(intel_private.gtt); iounmap(intel_private.registers); } -static int intel_i915_insert_entries(struct agp_memory *mem,off_t pg_start, - int type) +static void intel_i915_chipset_flush(struct agp_bridge_data *bridge) { - int i,j,num_entries; + if (intel_private.i9xx_flush_page) + writel(1, intel_private.i9xx_flush_page); +} + +static int intel_i915_insert_entries(struct agp_memory *mem, off_t pg_start, + int type) +{ + int i, j, num_entries; void *temp; int ret = -EINVAL; int mask_type; @@ -820,10 +983,10 @@ static int intel_i915_insert_entries(struct agp_memory *mem,off_t pg_start, num_entries = A_SIZE_FIX(temp)->num_entries; if (pg_start < intel_private.gtt_entries) { - printk (KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n", - pg_start,intel_private.gtt_entries); + printk(KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n", + pg_start, intel_private.gtt_entries); - printk (KERN_INFO PFX "Trying to insert into local/stolen memory\n"); + printk(KERN_INFO PFX "Trying to insert into local/stolen memory\n"); goto out_err; } @@ -861,8 +1024,8 @@ static int intel_i915_insert_entries(struct agp_memory *mem,off_t pg_start, return ret; } -static int intel_i915_remove_entries(struct agp_memory *mem,off_t pg_start, - int type) +static int intel_i915_remove_entries(struct agp_memory *mem, off_t pg_start, + int type) { int i; @@ -870,13 +1033,13 @@ static int intel_i915_remove_entries(struct agp_memory *mem,off_t pg_start, return 0; if (pg_start < intel_private.gtt_entries) { - printk (KERN_INFO PFX "Trying to disable local/stolen memory\n"); + printk(KERN_INFO PFX "Trying to disable local/stolen memory\n"); return -EINVAL; } - for (i = pg_start; i < (mem->page_count + pg_start); i++) { + for (i = pg_start; i < (mem->page_count + pg_start); i++) writel(agp_bridge->scratch_page, intel_private.gtt+i); - } + readl(intel_private.gtt+i-1); agp_bridge->driver->tlb_flush(mem); @@ -923,7 +1086,7 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge) agp_bridge->gatt_table_real = NULL; pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp); - pci_read_config_dword(intel_private.pcidev, I915_PTEADDR,&temp2); + pci_read_config_dword(intel_private.pcidev, I915_PTEADDR, &temp2); if (IS_G33) gtt_map_size = 1024 * 1024; /* 1M on G33 */ @@ -933,7 +1096,7 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge) temp &= 0xfff80000; - intel_private.registers = ioremap(temp,128 * 4096); + intel_private.registers = ioremap(temp, 128 * 4096); if (!intel_private.registers) { iounmap(intel_private.gtt); return -ENOMEM; @@ -980,6 +1143,7 @@ static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge) struct aper_size_info_fixed *size; int num_entries; u32 temp; + int gtt_offset, gtt_size; size = agp_bridge->current_size; page_order = size->page_order; @@ -989,13 +1153,18 @@ static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge) pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp); temp &= 0xfff00000; - intel_private.gtt = ioremap((temp + (512 * 1024)) , 512 * 1024); - if (!intel_private.gtt) - return -ENOMEM; + if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB) + gtt_offset = gtt_size = MB(2); + else + gtt_offset = gtt_size = KB(512); + + intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); + if (!intel_private.gtt) + return -ENOMEM; - intel_private.registers = ioremap(temp,128 * 4096); + intel_private.registers = ioremap(temp, 128 * 4096); if (!intel_private.registers) { iounmap(intel_private.gtt); return -ENOMEM; @@ -1154,7 +1323,7 @@ static int intel_815_configure(void) /* the Intel 815 chipset spec. says that bits 29-31 in the * ATTBASE register are reserved -> try not to write them */ if (agp_bridge->gatt_bus_addr & INTEL_815_ATTBASE_MASK) { - printk (KERN_EMERG PFX "gatt bus addr too high"); + printk(KERN_EMERG PFX "gatt bus addr too high"); return -EINVAL; } @@ -1296,6 +1465,8 @@ static int intel_845_configure(void) pci_write_config_byte(agp_bridge->dev, INTEL_I845_AGPM, temp2 | (1 << 1)); /* clear any possible error conditions */ pci_write_config_word(agp_bridge->dev, INTEL_I845_ERRSTS, 0x001c); + + intel_i830_setup_flush(); return 0; } @@ -1552,6 +1723,7 @@ static const struct agp_bridge_driver intel_830_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .chipset_flush = intel_i830_chipset_flush, }; static const struct agp_bridge_driver intel_820_driver = { @@ -1648,6 +1820,7 @@ static const struct agp_bridge_driver intel_845_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, + .chipset_flush = intel_i830_chipset_flush, }; static const struct agp_bridge_driver intel_850_driver = { @@ -1721,6 +1894,7 @@ static const struct agp_bridge_driver intel_915_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .chipset_flush = intel_i915_chipset_flush, }; static const struct agp_bridge_driver intel_i965_driver = { @@ -1746,6 +1920,7 @@ static const struct agp_bridge_driver intel_i965_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .chipset_flush = intel_i915_chipset_flush, }; static const struct agp_bridge_driver intel_7505_driver = { @@ -1795,6 +1970,7 @@ static const struct agp_bridge_driver intel_g33_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .chipset_flush = intel_i915_chipset_flush, }; static int find_gmch(u16 device) @@ -1804,7 +1980,7 @@ static int find_gmch(u16 device) gmch_device = pci_get_device(PCI_VENDOR_ID_INTEL, device, NULL); if (gmch_device && PCI_FUNC(gmch_device->devfn) != 0) { gmch_device = pci_get_device(PCI_VENDOR_ID_INTEL, - device, gmch_device); + device, gmch_device); } if (!gmch_device) @@ -1867,7 +2043,7 @@ static const struct intel_driver_description { NULL, &intel_915_driver }, { PCI_DEVICE_ID_INTEL_82946GZ_HB, PCI_DEVICE_ID_INTEL_82946GZ_IG, 0, "946GZ", NULL, &intel_i965_driver }, - { PCI_DEVICE_ID_INTEL_82965G_1_HB, PCI_DEVICE_ID_INTEL_82965G_1_IG, 0, "965G", + { PCI_DEVICE_ID_INTEL_82G35_HB, PCI_DEVICE_ID_INTEL_82G35_IG, 0, "G35", NULL, &intel_i965_driver }, { PCI_DEVICE_ID_INTEL_82965Q_HB, PCI_DEVICE_ID_INTEL_82965Q_IG, 0, "965Q", NULL, &intel_i965_driver }, @@ -1885,6 +2061,8 @@ static const struct intel_driver_description { NULL, &intel_g33_driver }, { PCI_DEVICE_ID_INTEL_Q33_HB, PCI_DEVICE_ID_INTEL_Q33_IG, 0, "Q33", NULL, &intel_g33_driver }, + { PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0, + "Intel Integrated Graphics Device", NULL, &intel_i965_driver }, { 0, 0, 0, NULL, NULL, NULL } }; @@ -1924,7 +2102,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev, if (intel_agp_chipsets[i].name == NULL) { if (cap_ptr) printk(KERN_WARNING PFX "Unsupported Intel chipset" - "(device id: %04x)\n", pdev->device); + "(device id: %04x)\n", pdev->device); agp_put_bridge(bridge); return -ENODEV; } @@ -1937,7 +2115,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev, intel_agp_chipsets[i].gmch_chip_id); agp_put_bridge(bridge); return -ENODEV; - } + } bridge->dev = pdev; bridge->capndx = cap_ptr; @@ -2067,7 +2245,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_82945GM_HB), ID(PCI_DEVICE_ID_INTEL_82945GME_HB), ID(PCI_DEVICE_ID_INTEL_82946GZ_HB), - ID(PCI_DEVICE_ID_INTEL_82965G_1_HB), + ID(PCI_DEVICE_ID_INTEL_82G35_HB), ID(PCI_DEVICE_ID_INTEL_82965Q_HB), ID(PCI_DEVICE_ID_INTEL_82965G_HB), ID(PCI_DEVICE_ID_INTEL_82965GM_HB), @@ -2075,6 +2253,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_G33_HB), ID(PCI_DEVICE_ID_INTEL_Q35_HB), ID(PCI_DEVICE_ID_INTEL_Q33_HB), + ID(PCI_DEVICE_ID_INTEL_IGD_HB), { } }; diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c index 1f0b752e5de..a7c4990b5b6 100644 --- a/drivers/char/applicom.c +++ b/drivers/char/applicom.c @@ -57,7 +57,6 @@ #define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002 #define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003 #endif -#define MAX_PCI_DEVICE_NUM 3 static char *applicom_pci_devnames[] = { "PCI board", @@ -66,12 +65,9 @@ static char *applicom_pci_devnames[] = { }; static struct pci_device_id applicom_pci_tbl[] = { - { PCI_VENDOR_ID_APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { PCI_VENDOR_ID_APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { PCI_VENDOR_ID_APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC) }, + { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN) }, + { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB) }, { 0 } }; MODULE_DEVICE_TABLE(pci, applicom_pci_tbl); @@ -197,31 +193,29 @@ static int __init applicom_init(void) while ( (dev = pci_get_class(PCI_CLASS_OTHERS << 16, dev))) { - if (dev->vendor != PCI_VENDOR_ID_APPLICOM) - continue; - - if (dev->device > MAX_PCI_DEVICE_NUM || dev->device == 0) + if (!pci_match_id(applicom_pci_tbl, dev)) continue; if (pci_enable_device(dev)) return -EIO; - RamIO = ioremap(dev->resource[0].start, LEN_RAM_IO); + RamIO = ioremap(pci_resource_start(dev, 0), LEN_RAM_IO); if (!RamIO) { printk(KERN_INFO "ac.o: Failed to ioremap PCI memory " "space at 0x%llx\n", - (unsigned long long)dev->resource[0].start); + (unsigned long long)pci_resource_start(dev, 0)); pci_disable_device(dev); return -EIO; } printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n", applicom_pci_devnames[dev->device-1], - (unsigned long long)dev->resource[0].start, + (unsigned long long)pci_resource_start(dev, 0), dev->irq); - boardno = ac_register_board(dev->resource[0].start, RamIO,0); + boardno = ac_register_board(pci_resource_start(dev, 0), + RamIO, 0); if (!boardno) { printk(KERN_INFO "ac.o: PCI Applicom device doesn't have correct signature.\n"); iounmap(RamIO); diff --git a/drivers/char/drm/Kconfig b/drivers/char/drm/Kconfig index ba3058dd39a..610d6fd5bb5 100644 --- a/drivers/char/drm/Kconfig +++ b/drivers/char/drm/Kconfig @@ -38,7 +38,7 @@ config DRM_RADEON Choose this option if you have an ATI Radeon graphics card. There are both PCI and AGP versions. You don't need to choose this to run the Radeon in plain VGA mode. - + If M is selected, the module will be called radeon. config DRM_I810 @@ -71,9 +71,9 @@ config DRM_I915 852GM, 855GM 865G or 915G integrated graphics. If M is selected, the module will be called i915. AGP support is required for this driver to work. This driver is used by the Intel driver in X.org 6.8 and - XFree86 4.4 and above. If unsure, build this and i830 as modules and + XFree86 4.4 and above. If unsure, build this and i830 as modules and the X server will load the correct one. - + endchoice config DRM_MGA @@ -88,7 +88,7 @@ config DRM_SIS tristate "SiS video cards" depends on DRM && AGP help - Choose this option if you have a SiS 630 or compatible video + Choose this option if you have a SiS 630 or compatible video chipset. If M is selected the module will be called sis. AGP support is required for this driver to work. @@ -105,4 +105,3 @@ config DRM_SAVAGE help Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister chipset. If M is selected the module will be called savage. - diff --git a/drivers/char/drm/Makefile b/drivers/char/drm/Makefile index 6915a0599df..1283ded88ea 100644 --- a/drivers/char/drm/Makefile +++ b/drivers/char/drm/Makefile @@ -38,5 +38,3 @@ obj-$(CONFIG_DRM_I915) += i915.o obj-$(CONFIG_DRM_SIS) += sis.o obj-$(CONFIG_DRM_SAVAGE)+= savage.o obj-$(CONFIG_DRM_VIA) +=via.o - - diff --git a/drivers/char/drm/README.drm b/drivers/char/drm/README.drm index af74cd79a27..b5b33272258 100644 --- a/drivers/char/drm/README.drm +++ b/drivers/char/drm/README.drm @@ -41,4 +41,3 @@ For specific information about kernel-level support, see: A Security Analysis of the Direct Rendering Infrastructure http://dri.sourceforge.net/doc/security_low_level.html - diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c index 3345641ff90..d352dbb4ccf 100644 --- a/drivers/char/drm/ati_pcigart.c +++ b/drivers/char/drm/ati_pcigart.c @@ -41,7 +41,7 @@ static void *drm_ati_alloc_pcigart_table(int order) struct page *page; int i; - DRM_DEBUG("%s: alloc %d order\n", __FUNCTION__, order); + DRM_DEBUG("%d order\n", order); address = __get_free_pages(GFP_KERNEL | __GFP_COMP, order); @@ -54,7 +54,7 @@ static void *drm_ati_alloc_pcigart_table(int order) for (i = 0; i < order; i++, page++) SetPageReserved(page); - DRM_DEBUG("%s: returning 0x%08lx\n", __FUNCTION__, address); + DRM_DEBUG("returning 0x%08lx\n", address); return (void *)address; } @@ -63,7 +63,7 @@ static void drm_ati_free_pcigart_table(void *address, int order) struct page *page; int i; int num_pages = 1 << order; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); page = virt_to_page((unsigned long)address); diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h index 82fb3d0d278..3a05c6d5ebe 100644 --- a/drivers/char/drm/drm.h +++ b/drivers/char/drm/drm.h @@ -202,7 +202,8 @@ enum drm_map_flags { _DRM_KERNEL = 0x08, /**< kernel requires access */ _DRM_WRITE_COMBINING = 0x10, /**< use write-combining if available */ _DRM_CONTAINS_LOCK = 0x20, /**< SHM page that contains lock */ - _DRM_REMOVABLE = 0x40 /**< Removable mapping */ + _DRM_REMOVABLE = 0x40, /**< Removable mapping */ + _DRM_DRIVER = 0x80 /**< Managed by driver */ }; struct drm_ctx_priv_map { diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index dde02a15fa5..19d3be5c4b2 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -292,7 +292,6 @@ struct drm_magic_entry { struct list_head head; struct drm_hash_item hash_item; struct drm_file *priv; - struct drm_magic_entry *next; }; struct drm_vma_entry { @@ -388,8 +387,8 @@ struct drm_file { struct drm_head *head; int remove_auth_on_close; unsigned long lock_count; - void *driver_priv; struct file *filp; + void *driver_priv; }; /** Wait queue */ @@ -401,11 +400,9 @@ struct drm_queue { wait_queue_head_t read_queue; /**< Processes waiting on block_read */ atomic_t block_write; /**< Queue blocked for writes */ wait_queue_head_t write_queue; /**< Processes waiting on block_write */ -#if 1 atomic_t total_queued; /**< Total queued statistic */ atomic_t total_flushed; /**< Total flushes statistic */ atomic_t total_locks; /**< Total locks statistics */ -#endif enum drm_ctx_flags flags; /**< Context preserving and 2D-only */ struct drm_waitlist waitlist; /**< Pending buffers */ wait_queue_head_t flush_queue; /**< Processes waiting until flush */ @@ -416,7 +413,8 @@ struct drm_queue { */ struct drm_lock_data { struct drm_hw_lock *hw_lock; /**< Hardware lock */ - struct drm_file *file_priv; /**< File descr of lock holder (0=kernel) */ + /** Private of lock holder's file (NULL=kernel) */ + struct drm_file *file_priv; wait_queue_head_t lock_queue; /**< Queue of blocked processes */ unsigned long lock_time; /**< Time of last lock in jiffies */ spinlock_t spinlock; @@ -491,6 +489,27 @@ struct drm_sigdata { struct drm_hw_lock *lock; }; + +/* + * Generic memory manager structs + */ + +struct drm_mm_node { + struct list_head fl_entry; + struct list_head ml_entry; + int free; + unsigned long start; + unsigned long size; + struct drm_mm *mm; + void *private; +}; + +struct drm_mm { + struct list_head fl_entry; + struct list_head ml_entry; +}; + + /** * Mappings list */ @@ -498,7 +517,7 @@ struct drm_map_list { struct list_head head; /**< list head */ struct drm_hash_item hash; struct drm_map *map; /**< mapping */ - unsigned int user_token; + uint64_t user_token; }; typedef struct drm_map drm_local_map_t; @@ -536,24 +555,6 @@ struct drm_ati_pcigart_info { int table_size; }; -/* - * Generic memory manager structs - */ -struct drm_mm_node { - struct list_head fl_entry; - struct list_head ml_entry; - int free; - unsigned long start; - unsigned long size; - struct drm_mm *mm; - void *private; -}; - -struct drm_mm { - struct list_head fl_entry; - struct list_head ml_entry; -}; - /** * DRM driver structure. This structure represent the common code for * a family of cards. There will one drm_device for each card present @@ -567,6 +568,8 @@ struct drm_driver { void (*postclose) (struct drm_device *, struct drm_file *); void (*lastclose) (struct drm_device *); int (*unload) (struct drm_device *); + int (*suspend) (struct drm_device *); + int (*resume) (struct drm_device *); int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv); void (*dma_ready) (struct drm_device *); int (*dma_quiescent) (struct drm_device *); @@ -642,6 +645,7 @@ struct drm_head { * may contain multiple heads. */ struct drm_device { + struct device dev; /**< Linux device */ char *unique; /**< Unique identifier: e.g., busid */ int unique_len; /**< Length of unique field */ char *devname; /**< For /proc/interrupts */ @@ -750,7 +754,6 @@ struct drm_device { struct pci_controller *hose; #endif struct drm_sg_mem *sg; /**< Scatter gather memory */ - unsigned long *ctx_bitmap; /**< context bitmap */ void *dev_private; /**< device private data */ struct drm_sigdata sigdata; /**< For block_all_signals */ sigset_t sigmask; @@ -847,6 +850,8 @@ extern int drm_release(struct inode *inode, struct file *filp); /* Mapping support (drm_vm.h) */ extern int drm_mmap(struct file *filp, struct vm_area_struct *vma); +extern unsigned long drm_core_get_map_ofs(struct drm_map * map); +extern unsigned long drm_core_get_reg_ofs(struct drm_device *dev); extern unsigned int drm_poll(struct file *filp, struct poll_table_struct *wait); /* Memory management support (drm_memory.h) */ @@ -1061,11 +1066,11 @@ extern void __drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah); extern void drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah); /* sysfs support (drm_sysfs.c) */ +struct drm_sysfs_class; extern struct class *drm_sysfs_create(struct module *owner, char *name); -extern void drm_sysfs_destroy(struct class *cs); -extern struct class_device *drm_sysfs_device_add(struct class *cs, - struct drm_head *head); -extern void drm_sysfs_device_remove(struct class_device *class_dev); +extern void drm_sysfs_destroy(void); +extern int drm_sysfs_device_add(struct drm_device *dev, struct drm_head *head); +extern void drm_sysfs_device_remove(struct drm_device *dev); /* * Basic memory manager support (drm_mm.c) @@ -1073,7 +1078,7 @@ extern void drm_sysfs_device_remove(struct class_device *class_dev); extern struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent, unsigned long size, unsigned alignment); -void drm_mm_put_block(struct drm_mm_node * cur); +extern void drm_mm_put_block(struct drm_mm_node * cur); extern struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm, unsigned long size, unsigned alignment, int best_match); extern int drm_mm_init(struct drm_mm *mm, unsigned long start, unsigned long size); @@ -1144,8 +1149,5 @@ extern void *drm_calloc(size_t nmemb, size_t size, int area); /*@}*/ -extern unsigned long drm_core_get_map_ofs(struct drm_map * map); -extern unsigned long drm_core_get_reg_ofs(struct drm_device *dev); - #endif /* __KERNEL__ */ #endif diff --git a/drivers/char/drm/drm_agpsupport.c b/drivers/char/drm/drm_agpsupport.c index 214f4fbcba7..9468c7889ff 100644 --- a/drivers/char/drm/drm_agpsupport.c +++ b/drivers/char/drm/drm_agpsupport.c @@ -166,7 +166,6 @@ int drm_agp_enable(struct drm_device * dev, struct drm_agp_mode mode) dev->agp->mode = mode.mode; agp_enable(dev->agp->bridge, mode.mode); - dev->agp->base = dev->agp->agp_info.aper_base; dev->agp->enabled = 1; return 0; } @@ -417,7 +416,7 @@ struct drm_agp_head *drm_agp_init(struct drm_device *dev) INIT_LIST_HEAD(&head->memory); head->cant_use_aperture = head->agp_info.cant_use_aperture; head->page_mask = head->agp_info.page_mask; - + head->base = head->agp_info.aper_base; return head; } diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index d24a6c2c2c2..bde64b84166 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -184,7 +184,7 @@ static int drm_addmap_core(struct drm_device * dev, unsigned int offset, return -ENOMEM; } } - + break; case _DRM_SHM: list = drm_find_matching_map(dev, map); @@ -229,11 +229,17 @@ static int drm_addmap_core(struct drm_device * dev, unsigned int offset, #ifdef __alpha__ map->offset += dev->hose->mem_space->start; #endif - /* Note: dev->agp->base may actually be 0 when the DRM - * is not in control of AGP space. But if user space is - * it should already have added the AGP base itself. + /* In some cases (i810 driver), user space may have already + * added the AGP base itself, because dev->agp->base previously + * only got set during AGP enable. So, only add the base + * address if the map's offset isn't already within the + * aperture. */ - map->offset += dev->agp->base; + if (map->offset < dev->agp->base || + map->offset > dev->agp->base + + dev->agp->agp_info.aper_size * 1024 * 1024 - 1) { + map->offset += dev->agp->base; + } map->mtrr = dev->agp->agp_mtrr; /* for getmap */ /* This assumes the DRM is in total control of AGP space. @@ -429,6 +435,7 @@ int drm_rmmap(struct drm_device *dev, drm_local_map_t *map) return ret; } +EXPORT_SYMBOL(drm_rmmap); /* The rmmap ioctl appears to be unnecessary. All mappings are torn down on * the last close of the device, and this is necessary for cleanup when things @@ -814,9 +821,9 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request) page_count = 0; while (entry->buf_count < count) { - + dmah = drm_pci_alloc(dev, PAGE_SIZE << page_order, 0x1000, 0xfffffffful); - + if (!dmah) { /* Set count correctly so we free the proper amount. */ entry->buf_count = count; @@ -1592,5 +1599,3 @@ int drm_order(unsigned long size) return order; } EXPORT_SYMBOL(drm_order); - - diff --git a/drivers/char/drm/drm_context.c b/drivers/char/drm/drm_context.c index 17fe69e7bfc..d505f695421 100644 --- a/drivers/char/drm/drm_context.c +++ b/drivers/char/drm/drm_context.c @@ -159,7 +159,7 @@ int drm_getsareactx(struct drm_device *dev, void *data, request->handle = NULL; list_for_each_entry(_entry, &dev->maplist, head) { if (_entry->map == map) { - request->handle = + request->handle = (void *)(unsigned long)_entry->user_token; break; } diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index 44a46268b02..0e7af53c87d 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -200,8 +200,10 @@ int drm_lastclose(struct drm_device * dev) } list_for_each_entry_safe(r_list, list_t, &dev->maplist, head) { - drm_rmmap_locked(dev, r_list->map); - r_list = NULL; + if (!(r_list->map->flags & _DRM_DRIVER)) { + drm_rmmap_locked(dev, r_list->map); + r_list = NULL; + } } if (drm_core_check_feature(dev, DRIVER_DMA_QUEUE) && dev->queuelist) { @@ -255,8 +257,6 @@ int drm_init(struct drm_driver *driver) DRM_DEBUG("\n"); - drm_mem_init(); - for (i = 0; driver->pci_driver.id_table[i].vendor != 0; i++) { pid = (struct pci_device_id *)&driver->pci_driver.id_table[i]; @@ -293,10 +293,6 @@ static void drm_cleanup(struct drm_device * dev) drm_lastclose(dev); - drm_ht_remove(&dev->map_hash); - - drm_ctxbitmap_cleanup(dev); - if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) && dev->agp && dev->agp->agp_mtrr >= 0) { int retval; @@ -314,6 +310,9 @@ static void drm_cleanup(struct drm_device * dev) if (dev->driver->unload) dev->driver->unload(dev); + drm_ht_remove(&dev->map_hash); + drm_ctxbitmap_cleanup(dev); + drm_put_head(&dev->primary); if (drm_put_dev(dev)) DRM_ERROR("Cannot unload module\n"); @@ -383,22 +382,24 @@ static int __init drm_core_init(void) goto err_p3; } + drm_mem_init(); + DRM_INFO("Initialized %s %d.%d.%d %s\n", CORE_NAME, CORE_MAJOR, CORE_MINOR, CORE_PATCHLEVEL, CORE_DATE); return 0; - err_p3: - drm_sysfs_destroy(drm_class); - err_p2: +err_p3: + drm_sysfs_destroy(); +err_p2: unregister_chrdev(DRM_MAJOR, "drm"); drm_free(drm_heads, sizeof(*drm_heads) * drm_cards_limit, DRM_MEM_STUB); - err_p1: +err_p1: return ret; } static void __exit drm_core_exit(void) { remove_proc_entry("dri", NULL); - drm_sysfs_destroy(drm_class); + drm_sysfs_destroy(); unregister_chrdev(DRM_MAJOR, "drm"); @@ -494,23 +495,25 @@ int drm_ioctl(struct inode *inode, struct file *filp, } else { if (cmd & (IOC_IN | IOC_OUT)) { kdata = kmalloc(_IOC_SIZE(cmd), GFP_KERNEL); - if (!kdata) - return -ENOMEM; + if (!kdata) { + retcode = -ENOMEM; + goto err_i1; + } } if (cmd & IOC_IN) { if (copy_from_user(kdata, (void __user *)arg, _IOC_SIZE(cmd)) != 0) { - retcode = -EACCES; + retcode = -EFAULT; goto err_i1; } } retcode = func(dev, kdata, file_priv); - if (cmd & IOC_OUT) { + if ((retcode == 0) && (cmd & IOC_OUT)) { if (copy_to_user((void __user *)arg, kdata, _IOC_SIZE(cmd)) != 0) - retcode = -EACCES; + retcode = -EFAULT; } } diff --git a/drivers/char/drm/drm_hashtab.c b/drivers/char/drm/drm_hashtab.c index 4b8e7db5a23..33160673a7b 100644 --- a/drivers/char/drm/drm_hashtab.c +++ b/drivers/char/drm/drm_hashtab.c @@ -80,7 +80,7 @@ void drm_ht_verbose_list(struct drm_open_hash *ht, unsigned long key) } } -static struct hlist_node *drm_ht_find_key(struct drm_open_hash *ht, +static struct hlist_node *drm_ht_find_key(struct drm_open_hash *ht, unsigned long key) { struct drm_hash_item *entry; @@ -129,7 +129,7 @@ int drm_ht_insert_item(struct drm_open_hash *ht, struct drm_hash_item *item) } /* - * Just insert an item and return any "bits" bit key that hasn't been + * Just insert an item and return any "bits" bit key that hasn't been * used before. */ int drm_ht_just_insert_please(struct drm_open_hash *ht, struct drm_hash_item *item, @@ -200,4 +200,3 @@ void drm_ht_remove(struct drm_open_hash *ht) ht->table = NULL; } } - diff --git a/drivers/char/drm/drm_hashtab.h b/drivers/char/drm/drm_hashtab.h index 573e333ac45..cd2b189e1be 100644 --- a/drivers/char/drm/drm_hashtab.h +++ b/drivers/char/drm/drm_hashtab.h @@ -65,4 +65,3 @@ extern void drm_ht_remove(struct drm_open_hash *ht); #endif - diff --git a/drivers/char/drm/drm_ioc32.c b/drivers/char/drm/drm_ioc32.c index 2286f3312c5..90f5a8d9bdc 100644 --- a/drivers/char/drm/drm_ioc32.c +++ b/drivers/char/drm/drm_ioc32.c @@ -1051,8 +1051,12 @@ long drm_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) drm_ioctl_compat_t *fn; int ret; + /* Assume that ioctls without an explicit compat routine will just + * work. This may not always be a good assumption, but it's better + * than always failing. + */ if (nr >= ARRAY_SIZE(drm_compat_ioctls)) - return -ENOTTY; + return drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg); fn = drm_compat_ioctls[nr]; diff --git a/drivers/char/drm/drm_ioctl.c b/drivers/char/drm/drm_ioctl.c index 3cbebf868e6..16829fb3089 100644 --- a/drivers/char/drm/drm_ioctl.c +++ b/drivers/char/drm/drm_ioctl.c @@ -234,26 +234,23 @@ int drm_getclient(struct drm_device *dev, void *data, idx = client->idx; mutex_lock(&dev->struct_mutex); - - if (list_empty(&dev->filelist)) { - mutex_unlock(&dev->struct_mutex); - return -EINVAL; - } i = 0; list_for_each_entry(pt, &dev->filelist, lhead) { - if (i++ >= idx) - break; + if (i++ >= idx) { + client->auth = pt->authenticated; + client->pid = pt->pid; + client->uid = pt->uid; + client->magic = pt->magic; + client->iocs = pt->ioctl_count; + mutex_unlock(&dev->struct_mutex); + + return 0; + } } - - client->auth = pt->authenticated; - client->pid = pt->pid; - client->uid = pt->uid; - client->magic = pt->magic; - client->iocs = pt->ioctl_count; mutex_unlock(&dev->struct_mutex); - return 0; + return -EINVAL; } /** diff --git a/drivers/char/drm/drm_irq.c b/drivers/char/drm/drm_irq.c index 05eae63f85b..089c015c01d 100644 --- a/drivers/char/drm/drm_irq.c +++ b/drivers/char/drm/drm_irq.c @@ -107,7 +107,7 @@ static int drm_irq_install(struct drm_device * dev) dev->irq_enabled = 1; mutex_unlock(&dev->struct_mutex); - DRM_DEBUG("%s: irq=%d\n", __FUNCTION__, dev->irq); + DRM_DEBUG("irq=%d\n", dev->irq); if (drm_core_check_feature(dev, DRIVER_IRQ_VBL)) { init_waitqueue_head(&dev->vbl_queue); @@ -164,7 +164,7 @@ int drm_irq_uninstall(struct drm_device * dev) if (!irq_enabled) return -EINVAL; - DRM_DEBUG("%s: irq=%d\n", __FUNCTION__, dev->irq); + DRM_DEBUG("irq=%d\n", dev->irq); dev->driver->irq_uninstall(dev); diff --git a/drivers/char/drm/drm_memory.c b/drivers/char/drm/drm_memory.c index 93019901bd3..845081b44f6 100644 --- a/drivers/char/drm/drm_memory.c +++ b/drivers/char/drm/drm_memory.c @@ -179,4 +179,3 @@ void drm_core_ioremapfree(struct drm_map *map, struct drm_device *dev) iounmap(map->handle); } EXPORT_SYMBOL(drm_core_ioremapfree); - diff --git a/drivers/char/drm/drm_mm.c b/drivers/char/drm/drm_mm.c index 86f4eb61a6a..dcff9e9b52e 100644 --- a/drivers/char/drm/drm_mm.c +++ b/drivers/char/drm/drm_mm.c @@ -293,4 +293,3 @@ void drm_mm_takedown(struct drm_mm * mm) drm_free(entry, sizeof(*entry), DRM_MEM_MM); } - diff --git a/drivers/char/drm/drm_os_linux.h b/drivers/char/drm/drm_os_linux.h index daa69c9d897..8dbd2572b7c 100644 --- a/drivers/char/drm/drm_os_linux.h +++ b/drivers/char/drm/drm_os_linux.h @@ -69,9 +69,9 @@ static __inline__ int mtrr_del(int reg, unsigned long base, unsigned long size) #define DRM_COPY_TO_USER(arg1, arg2, arg3) \ copy_to_user(arg1, arg2, arg3) /* Macros for copyfrom user, but checking readability only once */ -#define DRM_VERIFYAREA_READ( uaddr, size ) \ +#define DRM_VERIFYAREA_READ( uaddr, size ) \ (access_ok( VERIFY_READ, uaddr, size ) ? 0 : -EFAULT) -#define DRM_COPY_FROM_USER_UNCHECKED(arg1, arg2, arg3) \ +#define DRM_COPY_FROM_USER_UNCHECKED(arg1, arg2, arg3) \ __copy_from_user(arg1, arg2, arg3) #define DRM_COPY_TO_USER_UNCHECKED(arg1, arg2, arg3) \ __copy_to_user(arg1, arg2, arg3) diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index 43d3c42df36..f5246884367 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -139,6 +139,101 @@ {0x1002, 0x5e4c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5e4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5e4f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7103, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x710A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x710B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x710C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x710E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x710F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7140, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7141, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7142, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7143, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7147, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x714A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x714B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x714C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x714D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x714E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x714F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7153, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x715E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x715F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7183, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7186, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7187, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7188, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x718A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x718B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x718C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x718D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x718F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7193, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7196, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x719B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x719F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71C3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71C5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71C6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71C7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71CD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71CE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71D2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71D4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71D5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71D6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x71DE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7243, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7244, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7245, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7246, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7247, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7248, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x724A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x724B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x724C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x724D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x724E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x724F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7280, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7281, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7283, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7284, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7287, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7289, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x728B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x728C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7290, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7291, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7293, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x7297, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0, 0, 0} @@ -311,5 +406,5 @@ {0x8086, 0x29d2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} - diff --git a/drivers/char/drm/drm_proc.c b/drivers/char/drm/drm_proc.c index 12dfea89c7f..d9b560fe9bb 100644 --- a/drivers/char/drm/drm_proc.c +++ b/drivers/char/drm/drm_proc.c @@ -236,11 +236,11 @@ static int drm__vm_info(char *buf, char **start, off_t offset, int request, type = "??"; else type = types[map->type]; - DRM_PROC_PRINT("%4d 0x%08lx 0x%08lx %4.4s 0x%02x 0x%08x ", + DRM_PROC_PRINT("%4d 0x%08lx 0x%08lx %4.4s 0x%02x 0x%08lx ", i, map->offset, map->size, type, map->flags, - r_list->user_token); + (unsigned long) r_list->user_token); if (map->mtrr < 0) { DRM_PROC_PRINT("none\n"); } else { diff --git a/drivers/char/drm/drm_sarea.h b/drivers/char/drm/drm_sarea.h index e040f47f369..480037331e4 100644 --- a/drivers/char/drm/drm_sarea.h +++ b/drivers/char/drm/drm_sarea.h @@ -45,7 +45,7 @@ #endif /** Maximum number of drawables in the SAREA */ -#define SAREA_MAX_DRAWABLES 256 +#define SAREA_MAX_DRAWABLES 256 #define SAREA_DRAWABLE_CLAIMED_ENTRY 0x80000000 diff --git a/drivers/char/drm/drm_scatter.c b/drivers/char/drm/drm_scatter.c index eb7fa437355..26d8f675ed5 100644 --- a/drivers/char/drm/drm_scatter.c +++ b/drivers/char/drm/drm_scatter.c @@ -67,7 +67,7 @@ int drm_sg_alloc(struct drm_device *dev, struct drm_scatter_gather * request) struct drm_sg_mem *entry; unsigned long pages, i, j; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); if (!drm_core_check_feature(dev, DRIVER_SG)) return -EINVAL; @@ -81,7 +81,7 @@ int drm_sg_alloc(struct drm_device *dev, struct drm_scatter_gather * request) memset(entry, 0, sizeof(*entry)); pages = (request->size + PAGE_SIZE - 1) / PAGE_SIZE; - DRM_DEBUG("sg size=%ld pages=%ld\n", request->size, pages); + DRM_DEBUG("size=%ld pages=%ld\n", request->size, pages); entry->pages = pages; entry->pagelist = drm_alloc(pages * sizeof(*entry->pagelist), @@ -122,8 +122,8 @@ int drm_sg_alloc(struct drm_device *dev, struct drm_scatter_gather * request) entry->handle = ScatterHandle((unsigned long)entry->virtual); - DRM_DEBUG("sg alloc handle = %08lx\n", entry->handle); - DRM_DEBUG("sg alloc virtual = %p\n", entry->virtual); + DRM_DEBUG("handle = %08lx\n", entry->handle); + DRM_DEBUG("virtual = %p\n", entry->virtual); for (i = (unsigned long)entry->virtual, j = 0; j < pages; i += PAGE_SIZE, j++) { @@ -210,7 +210,7 @@ int drm_sg_free(struct drm_device *dev, void *data, if (!entry || entry->handle != request->handle) return -EINVAL; - DRM_DEBUG("sg free virtual = %p\n", entry->virtual); + DRM_DEBUG("virtual = %p\n", entry->virtual); drm_sg_cleanup(entry); diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c index ee83ff9efed..d93a217f856 100644 --- a/drivers/char/drm/drm_stub.c +++ b/drivers/char/drm/drm_stub.c @@ -98,10 +98,6 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev, dev->driver = driver; - if (dev->driver->load) - if ((retcode = dev->driver->load(dev, ent->driver_data))) - goto error_out_unreg; - if (drm_core_has_AGP(dev)) { if (drm_device_is_agp(dev)) dev->agp = drm_agp_init(dev); @@ -120,6 +116,10 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev, } } + if (dev->driver->load) + if ((retcode = dev->driver->load(dev, ent->driver_data))) + goto error_out_unreg; + retcode = drm_ctxbitmap_init(dev); if (retcode) { DRM_ERROR("Cannot allocate memory for context bitmap.\n"); @@ -168,11 +168,10 @@ static int drm_get_head(struct drm_device * dev, struct drm_head * head) goto err_g1; } - head->dev_class = drm_sysfs_device_add(drm_class, head); - if (IS_ERR(head->dev_class)) { + ret = drm_sysfs_device_add(dev, head); + if (ret) { printk(KERN_ERR "DRM: Error sysfs_device_add.\n"); - ret = PTR_ERR(head->dev_class); goto err_g2; } *heads = head; @@ -218,13 +217,14 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, if (ret) goto err_g1; + pci_set_master(pdev); if ((ret = drm_fill_in_dev(dev, pdev, ent, driver))) { printk(KERN_ERR "DRM: Fill_in_dev failed.\n"); goto err_g2; } if ((ret = drm_get_head(dev, &dev->primary))) goto err_g2; - + DRM_INFO("Initialized %s %d.%d.%d %s on minor %d\n", driver->name, driver->major, driver->minor, driver->patchlevel, driver->date, dev->primary.minor); @@ -283,7 +283,7 @@ int drm_put_head(struct drm_head * head) DRM_DEBUG("release secondary minor %d\n", minor); drm_proc_cleanup(minor, drm_proc_root, head->dev_root); - drm_sysfs_device_remove(head->dev_class); + drm_sysfs_device_remove(head->dev); *head = (struct drm_head) {.dev = NULL}; diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c index cf4349b00b0..fa36153619e 100644 --- a/drivers/char/drm/drm_sysfs.c +++ b/drivers/char/drm/drm_sysfs.c @@ -19,6 +19,45 @@ #include "drm_core.h" #include "drmP.h" +#define to_drm_device(d) container_of(d, struct drm_device, dev) + +/** + * drm_sysfs_suspend - DRM class suspend hook + * @dev: Linux device to suspend + * @state: power state to enter + * + * Just figures out what the actual struct drm_device associated with + * @dev is and calls its suspend hook, if present. + */ +static int drm_sysfs_suspend(struct device *dev, pm_message_t state) +{ + struct drm_device *drm_dev = to_drm_device(dev); + + printk(KERN_ERR "%s\n", __FUNCTION__); + + if (drm_dev->driver->suspend) + return drm_dev->driver->suspend(drm_dev); + + return 0; +} + +/** + * drm_sysfs_resume - DRM class resume hook + * @dev: Linux device to resume + * + * Just figures out what the actual struct drm_device associated with + * @dev is and calls its resume hook, if present. + */ +static int drm_sysfs_resume(struct device *dev) +{ + struct drm_device *drm_dev = to_drm_device(dev); + + if (drm_dev->driver->resume) + return drm_dev->driver->resume(drm_dev); + + return 0; +} + /* Display the version of drm_core. This doesn't work right in current design */ static ssize_t version_show(struct class *dev, char *buf) { @@ -33,7 +72,7 @@ static CLASS_ATTR(version, S_IRUGO, version_show, NULL); * @owner: pointer to the module that is to "own" this struct drm_sysfs_class * @name: pointer to a string for the name of this class. * - * This is used to create a struct drm_sysfs_class pointer that can then be used + * This is used to create DRM class pointer that can then be used * in calls to drm_sysfs_device_add(). * * Note, the pointer created here is to be destroyed when finished by making a @@ -50,6 +89,9 @@ struct class *drm_sysfs_create(struct module *owner, char *name) goto err_out; } + class->suspend = drm_sysfs_suspend; + class->resume = drm_sysfs_resume; + err = class_create_file(class, &class_attr_version); if (err) goto err_out_class; @@ -63,94 +105,100 @@ err_out: } /** - * drm_sysfs_destroy - destroys a struct drm_sysfs_class structure - * @cs: pointer to the struct drm_sysfs_class that is to be destroyed + * drm_sysfs_destroy - destroys DRM class * - * Note, the pointer to be destroyed must have been created with a call to - * drm_sysfs_create(). + * Destroy the DRM device class. */ -void drm_sysfs_destroy(struct class *class) +void drm_sysfs_destroy(void) { - if ((class == NULL) || (IS_ERR(class))) + if ((drm_class == NULL) || (IS_ERR(drm_class))) return; - - class_remove_file(class, &class_attr_version); - class_destroy(class); + class_remove_file(drm_class, &class_attr_version); + class_destroy(drm_class); } -static ssize_t show_dri(struct class_device *class_device, char *buf) +static ssize_t show_dri(struct device *device, struct device_attribute *attr, + char *buf) { - struct drm_device * dev = ((struct drm_head *)class_get_devdata(class_device))->dev; + struct drm_device *dev = to_drm_device(device); if (dev->driver->dri_library_name) return dev->driver->dri_library_name(dev, buf); return snprintf(buf, PAGE_SIZE, "%s\n", dev->driver->pci_driver.name); } -static struct class_device_attribute class_device_attrs[] = { +static struct device_attribute device_attrs[] = { __ATTR(dri_library_name, S_IRUGO, show_dri, NULL), }; /** + * drm_sysfs_device_release - do nothing + * @dev: Linux device + * + * Normally, this would free the DRM device associated with @dev, along + * with cleaning up any other stuff. But we do that in the DRM core, so + * this function can just return and hope that the core does its job. + */ +static void drm_sysfs_device_release(struct device *dev) +{ + return; +} + +/** * drm_sysfs_device_add - adds a class device to sysfs for a character driver - * @cs: pointer to the struct class that this device should be registered to. - * @dev: the dev_t for the device to be added. - * @device: a pointer to a struct device that is assiociated with this class device. - * @fmt: string for the class device's name + * @dev: DRM device to be added + * @head: DRM head in question * - * A struct class_device will be created in sysfs, registered to the specified - * class. A "dev" file will be created, showing the dev_t for the device. The - * pointer to the struct class_device will be returned from the call. Any further - * sysfs files that might be required can be created using this pointer. - * Note: the struct class passed to this function must have previously been - * created with a call to drm_sysfs_create(). + * Add a DRM device to the DRM's device model class. We use @dev's PCI device + * as the parent for the Linux device, and make sure it has a file containing + * the driver we're using (for userspace compatibility). */ -struct class_device *drm_sysfs_device_add(struct class *cs, struct drm_head *head) +int drm_sysfs_device_add(struct drm_device *dev, struct drm_head *head) { - struct class_device *class_dev; - int i, j, err; - - class_dev = class_device_create(cs, NULL, - MKDEV(DRM_MAJOR, head->minor), - &(head->dev->pdev)->dev, - "card%d", head->minor); - if (IS_ERR(class_dev)) { - err = PTR_ERR(class_dev); + int err; + int i, j; + + dev->dev.parent = &dev->pdev->dev; + dev->dev.class = drm_class; + dev->dev.release = drm_sysfs_device_release; + dev->dev.devt = head->device; + snprintf(dev->dev.bus_id, BUS_ID_SIZE, "card%d", head->minor); + + err = device_register(&dev->dev); + if (err) { + DRM_ERROR("device add failed: %d\n", err); goto err_out; } - class_set_devdata(class_dev, head); - - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) { - err = class_device_create_file(class_dev, - &class_device_attrs[i]); + for (i = 0; i < ARRAY_SIZE(device_attrs); i++) { + err = device_create_file(&dev->dev, &device_attrs[i]); if (err) goto err_out_files; } - return class_dev; + return 0; err_out_files: if (i > 0) for (j = 0; j < i; j++) - class_device_remove_file(class_dev, - &class_device_attrs[i]); - class_device_unregister(class_dev); + device_remove_file(&dev->dev, &device_attrs[i]); + device_unregister(&dev->dev); err_out: - return ERR_PTR(err); + + return err; } /** - * drm_sysfs_device_remove - removes a class device that was created with drm_sysfs_device_add() - * @dev: the dev_t of the device that was previously registered. + * drm_sysfs_device_remove - remove DRM device + * @dev: DRM device to remove * * This call unregisters and cleans up a class device that was created with a * call to drm_sysfs_device_add() */ -void drm_sysfs_device_remove(struct class_device *class_dev) +void drm_sysfs_device_remove(struct drm_device *dev) { int i; - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_remove_file(class_dev, &class_device_attrs[i]); - class_device_unregister(class_dev); + for (i = 0; i < ARRAY_SIZE(device_attrs); i++) + device_remove_file(&dev->dev, &device_attrs[i]); + device_unregister(&dev->dev); } diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c index ef5e6b130c4..cea4105374b 100644 --- a/drivers/char/drm/drm_vm.c +++ b/drivers/char/drm/drm_vm.c @@ -180,7 +180,7 @@ static __inline__ struct page *drm_do_vm_shm_nopage(struct vm_area_struct *vma, return NOPAGE_SIGBUS; get_page(page); - DRM_DEBUG("shm_nopage 0x%lx\n", address); + DRM_DEBUG("0x%lx\n", address); return page; } @@ -294,7 +294,7 @@ static __inline__ struct page *drm_do_vm_dma_nopage(struct vm_area_struct *vma, get_page(page); - DRM_DEBUG("dma_nopage 0x%lx (page %lu)\n", address, page_nr); + DRM_DEBUG("0x%lx (page %lu)\n", address, page_nr); return page; } diff --git a/drivers/char/drm/i810_dma.c b/drivers/char/drm/i810_dma.c index eb381a7c5be..8d7ea81c4b6 100644 --- a/drivers/char/drm/i810_dma.c +++ b/drivers/char/drm/i810_dma.c @@ -40,7 +40,7 @@ #define I810_BUF_FREE 2 #define I810_BUF_CLIENT 1 -#define I810_BUF_HARDWARE 0 +#define I810_BUF_HARDWARE 0 #define I810_BUF_UNMAPPED 0 #define I810_BUF_MAPPED 1 @@ -570,7 +570,7 @@ static void i810EmitState(struct drm_device * dev) drm_i810_sarea_t *sarea_priv = dev_priv->sarea_priv; unsigned int dirty = sarea_priv->dirty; - DRM_DEBUG("%s %x\n", __FUNCTION__, dirty); + DRM_DEBUG("%x\n", dirty); if (dirty & I810_UPLOAD_BUFFERS) { i810EmitDestVerified(dev, sarea_priv->BufferState); @@ -802,8 +802,7 @@ static void i810_dma_dispatch_flip(struct drm_device * dev) int pitch = dev_priv->pitch; RING_LOCALS; - DRM_DEBUG("%s: page=%d pfCurrentPage=%d\n", - __FUNCTION__, + DRM_DEBUG("page=%d pfCurrentPage=%d\n", dev_priv->current_page, dev_priv->sarea_priv->pf_current_page); @@ -848,8 +847,6 @@ static void i810_dma_quiescent(struct drm_device * dev) drm_i810_private_t *dev_priv = dev->dev_private; RING_LOCALS; -/* printk("%s\n", __FUNCTION__); */ - i810_kernel_lost_context(dev); BEGIN_LP_RING(4); @@ -869,8 +866,6 @@ static int i810_flush_queue(struct drm_device * dev) int i, ret = 0; RING_LOCALS; -/* printk("%s\n", __FUNCTION__); */ - i810_kernel_lost_context(dev); BEGIN_LP_RING(2); @@ -949,7 +944,7 @@ static int i810_dma_vertex(struct drm_device *dev, void *data, LOCK_TEST_WITH_RETURN(dev, file_priv); - DRM_DEBUG("i810 dma vertex, idx %d used %d discard %d\n", + DRM_DEBUG("idx %d used %d discard %d\n", vertex->idx, vertex->used, vertex->discard); if (vertex->idx < 0 || vertex->idx > dma->buf_count) @@ -987,7 +982,7 @@ static int i810_clear_bufs(struct drm_device *dev, void *data, static int i810_swap_bufs(struct drm_device *dev, void *data, struct drm_file *file_priv) { - DRM_DEBUG("i810_swap_bufs\n"); + DRM_DEBUG("\n"); LOCK_TEST_WITH_RETURN(dev, file_priv); @@ -1068,11 +1063,10 @@ static void i810_dma_dispatch_mc(struct drm_device * dev, struct drm_buf * buf, sarea_priv->dirty = 0x7f; - DRM_DEBUG("dispatch mc addr 0x%lx, used 0x%x\n", address, used); + DRM_DEBUG("addr 0x%lx, used 0x%x\n", address, used); dev_priv->counter++; DRM_DEBUG("dispatch counter : %ld\n", dev_priv->counter); - DRM_DEBUG("i810_dma_dispatch_mc\n"); DRM_DEBUG("start : %lx\n", start); DRM_DEBUG("used : %d\n", used); DRM_DEBUG("start + used - 4 : %ld\n", start + used - 4); @@ -1179,7 +1173,7 @@ static void i810_do_init_pageflip(struct drm_device * dev) { drm_i810_private_t *dev_priv = dev->dev_private; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); dev_priv->page_flipping = 1; dev_priv->current_page = 0; dev_priv->sarea_priv->pf_current_page = dev_priv->current_page; @@ -1189,7 +1183,7 @@ static int i810_do_cleanup_pageflip(struct drm_device * dev) { drm_i810_private_t *dev_priv = dev->dev_private; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); if (dev_priv->current_page != 0) i810_dma_dispatch_flip(dev); @@ -1202,7 +1196,7 @@ static int i810_flip_bufs(struct drm_device *dev, void *data, { drm_i810_private_t *dev_priv = dev->dev_private; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); LOCK_TEST_WITH_RETURN(dev, file_priv); diff --git a/drivers/char/drm/i810_drv.h b/drivers/char/drm/i810_drv.h index 0af45872f67..0118849a567 100644 --- a/drivers/char/drm/i810_drv.h +++ b/drivers/char/drm/i810_drv.h @@ -25,7 +25,7 @@ * DEALINGS IN THE SOFTWARE. * * Authors: Rickard E. (Rik) Faith <faith@valinux.com> - * Jeff Hartmann <jhartmann@valinux.com> + * Jeff Hartmann <jhartmann@valinux.com> * */ @@ -134,7 +134,7 @@ extern int i810_max_ioctl; #define I810_ADDR(reg) (I810_BASE(reg) + reg) #define I810_DEREF(reg) *(__volatile__ int *)I810_ADDR(reg) #define I810_READ(reg) I810_DEREF(reg) -#define I810_WRITE(reg,val) do { I810_DEREF(reg) = val; } while (0) +#define I810_WRITE(reg,val) do { I810_DEREF(reg) = val; } while (0) #define I810_DEREF16(reg) *(__volatile__ u16 *)I810_ADDR(reg) #define I810_READ16(reg) I810_DEREF16(reg) #define I810_WRITE16(reg,val) do { I810_DEREF16(reg) = val; } while (0) @@ -145,7 +145,7 @@ extern int i810_max_ioctl; #define BEGIN_LP_RING(n) do { \ if (I810_VERBOSE) \ - DRM_DEBUG("BEGIN_LP_RING(%d) in %s\n", n, __FUNCTION__); \ + DRM_DEBUG("BEGIN_LP_RING(%d)\n", n); \ if (dev_priv->ring.space < n*4) \ i810_wait_ring(dev, n*4); \ dev_priv->ring.space -= n*4; \ @@ -155,19 +155,19 @@ extern int i810_max_ioctl; } while (0) #define ADVANCE_LP_RING() do { \ - if (I810_VERBOSE) DRM_DEBUG("ADVANCE_LP_RING\n"); \ - dev_priv->ring.tail = outring; \ + if (I810_VERBOSE) DRM_DEBUG("ADVANCE_LP_RING\n"); \ + dev_priv->ring.tail = outring; \ I810_WRITE(LP_RING + RING_TAIL, outring); \ } while(0) -#define OUT_RING(n) do { \ +#define OUT_RING(n) do { \ if (I810_VERBOSE) DRM_DEBUG(" OUT_RING %x\n", (int)(n)); \ *(volatile unsigned int *)(virt + outring) = n; \ outring += 4; \ outring &= ringmask; \ } while (0) -#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) +#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) #define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23)) #define CMD_REPORT_HEAD (7<<23) #define CMD_STORE_DWORD_IDX ((0x21<<23) | 0x1) @@ -184,28 +184,28 @@ extern int i810_max_ioctl; #define I810REG_HWSTAM 0x02098 #define I810REG_INT_IDENTITY_R 0x020a4 -#define I810REG_INT_MASK_R 0x020a8 +#define I810REG_INT_MASK_R 0x020a8 #define I810REG_INT_ENABLE_R 0x020a0 -#define LP_RING 0x2030 -#define HP_RING 0x2040 -#define RING_TAIL 0x00 +#define LP_RING 0x2030 +#define HP_RING 0x2040 +#define RING_TAIL 0x00 #define TAIL_ADDR 0x000FFFF8 -#define RING_HEAD 0x04 -#define HEAD_WRAP_COUNT 0xFFE00000 -#define HEAD_WRAP_ONE 0x00200000 -#define HEAD_ADDR 0x001FFFFC -#define RING_START 0x08 -#define START_ADDR 0x00FFFFF8 -#define RING_LEN 0x0C -#define RING_NR_PAGES 0x000FF000 -#define RING_REPORT_MASK 0x00000006 -#define RING_REPORT_64K 0x00000002 -#define RING_REPORT_128K 0x00000004 -#define RING_NO_REPORT 0x00000000 -#define RING_VALID_MASK 0x00000001 -#define RING_VALID 0x00000001 -#define RING_INVALID 0x00000000 +#define RING_HEAD 0x04 +#define HEAD_WRAP_COUNT 0xFFE00000 +#define HEAD_WRAP_ONE 0x00200000 +#define HEAD_ADDR 0x001FFFFC +#define RING_START 0x08 +#define START_ADDR 0x00FFFFF8 +#define RING_LEN 0x0C +#define RING_NR_PAGES 0x000FF000 +#define RING_REPORT_MASK 0x00000006 +#define RING_REPORT_64K 0x00000002 +#define RING_REPORT_128K 0x00000004 +#define RING_NO_REPORT 0x00000000 +#define RING_VALID_MASK 0x00000001 +#define RING_VALID 0x00000001 +#define RING_INVALID 0x00000000 #define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) #define SC_UPDATE_SCISSOR (0x1<<1) diff --git a/drivers/char/drm/i830_dma.c b/drivers/char/drm/i830_dma.c index 69a363edb0d..9df08105f4f 100644 --- a/drivers/char/drm/i830_dma.c +++ b/drivers/char/drm/i830_dma.c @@ -36,13 +36,13 @@ #include "i830_drm.h" #include "i830_drv.h" #include <linux/interrupt.h> /* For task queue support */ -#include <linux/pagemap.h> /* For FASTCALL on unlock_page() */ +#include <linux/pagemap.h> #include <linux/delay.h> #include <asm/uaccess.h> #define I830_BUF_FREE 2 #define I830_BUF_CLIENT 1 -#define I830_BUF_HARDWARE 0 +#define I830_BUF_HARDWARE 0 #define I830_BUF_UNMAPPED 0 #define I830_BUF_MAPPED 1 diff --git a/drivers/char/drm/i830_drm.h b/drivers/char/drm/i830_drm.h index 968a6d9f9dc..4b00d2dd4f6 100644 --- a/drivers/char/drm/i830_drm.h +++ b/drivers/char/drm/i830_drm.h @@ -12,9 +12,9 @@ #define _I830_DEFINES_ #define I830_DMA_BUF_ORDER 12 -#define I830_DMA_BUF_SZ (1<<I830_DMA_BUF_ORDER) -#define I830_DMA_BUF_NR 256 -#define I830_NR_SAREA_CLIPRECTS 8 +#define I830_DMA_BUF_SZ (1<<I830_DMA_BUF_ORDER) +#define I830_DMA_BUF_NR 256 +#define I830_NR_SAREA_CLIPRECTS 8 /* Each region is a minimum of 64k, and there are at most 64 of them. */ @@ -58,7 +58,7 @@ #define I830_UPLOAD_TEXBLEND_MASK 0xf00000 #define I830_UPLOAD_TEX_PALETTE_N(n) (0x1000000 << (n)) #define I830_UPLOAD_TEX_PALETTE_SHARED 0x4000000 -#define I830_UPLOAD_STIPPLE 0x8000000 +#define I830_UPLOAD_STIPPLE 0x8000000 /* Indices into buf.Setup where various bits of state are mirrored per * context and per buffer. These can be fired at the card as a unit, diff --git a/drivers/char/drm/i830_drv.h b/drivers/char/drm/i830_drv.h index db3a9fa8396..4caba8c5445 100644 --- a/drivers/char/drm/i830_drv.h +++ b/drivers/char/drm/i830_drv.h @@ -25,7 +25,7 @@ * DEALINGS IN THE SOFTWARE. * * Authors: Rickard E. (Rik) Faith <faith@valinux.com> - * Jeff Hartmann <jhartmann@valinux.com> + * Jeff Hartmann <jhartmann@valinux.com> * */ @@ -156,8 +156,7 @@ extern int i830_driver_device_is_agp(struct drm_device * dev); #define BEGIN_LP_RING(n) do { \ if (I830_VERBOSE) \ - printk("BEGIN_LP_RING(%d) in %s\n", \ - n, __FUNCTION__); \ + printk("BEGIN_LP_RING(%d)\n", (n)); \ if (dev_priv->ring.space < n*4) \ i830_wait_ring(dev, n*4, __FUNCTION__); \ outcount = 0; \ @@ -183,7 +182,7 @@ extern int i830_driver_device_is_agp(struct drm_device * dev); extern int i830_wait_ring(struct drm_device * dev, int n, const char *caller); -#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) +#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) #define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23)) #define CMD_REPORT_HEAD (7<<23) #define CMD_STORE_DWORD_IDX ((0x21<<23) | 0x1) @@ -203,30 +202,30 @@ extern int i830_wait_ring(struct drm_device * dev, int n, const char *caller); #define I830REG_HWSTAM 0x02098 #define I830REG_INT_IDENTITY_R 0x020a4 -#define I830REG_INT_MASK_R 0x020a8 +#define I830REG_INT_MASK_R 0x020a8 #define I830REG_INT_ENABLE_R 0x020a0 #define I830_IRQ_RESERVED ((1<<13)|(3<<2)) -#define LP_RING 0x2030 -#define HP_RING 0x2040 -#define RING_TAIL 0x00 +#define LP_RING 0x2030 +#define HP_RING 0x2040 +#define RING_TAIL 0x00 #define TAIL_ADDR 0x001FFFF8 -#define RING_HEAD 0x04 -#define HEAD_WRAP_COUNT 0xFFE00000 -#define HEAD_WRAP_ONE 0x00200000 -#define HEAD_ADDR 0x001FFFFC -#define RING_START 0x08 -#define START_ADDR 0x0xFFFFF000 -#define RING_LEN 0x0C -#define RING_NR_PAGES 0x001FF000 -#define RING_REPORT_MASK 0x00000006 -#define RING_REPORT_64K 0x00000002 -#define RING_REPORT_128K 0x00000004 -#define RING_NO_REPORT 0x00000000 -#define RING_VALID_MASK 0x00000001 -#define RING_VALID 0x00000001 -#define RING_INVALID 0x00000000 +#define RING_HEAD 0x04 +#define HEAD_WRAP_COUNT 0xFFE00000 +#define HEAD_WRAP_ONE 0x00200000 +#define HEAD_ADDR 0x001FFFFC +#define RING_START 0x08 +#define START_ADDR 0x0xFFFFF000 +#define RING_LEN 0x0C +#define RING_NR_PAGES 0x001FF000 +#define RING_REPORT_MASK 0x00000006 +#define RING_REPORT_64K 0x00000002 +#define RING_REPORT_128K 0x00000004 +#define RING_NO_REPORT 0x00000000 +#define RING_VALID_MASK 0x00000001 +#define RING_VALID 0x00000001 +#define RING_INVALID 0x00000000 #define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) #define SC_UPDATE_SCISSOR (0x1<<1) @@ -279,9 +278,9 @@ extern int i830_wait_ring(struct drm_device * dev, int n, const char *caller); #define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) #define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) -#define MI_BATCH_BUFFER ((0x30<<23)|1) -#define MI_BATCH_BUFFER_START (0x31<<23) -#define MI_BATCH_BUFFER_END (0xA<<23) +#define MI_BATCH_BUFFER ((0x30<<23)|1) +#define MI_BATCH_BUFFER_START (0x31<<23) +#define MI_BATCH_BUFFER_END (0xA<<23) #define MI_BATCH_NON_SECURE (1) #define MI_WAIT_FOR_EVENT ((0x3<<23)) diff --git a/drivers/char/drm/i830_irq.c b/drivers/char/drm/i830_irq.c index 76403f4b620..a33db5f0967 100644 --- a/drivers/char/drm/i830_irq.c +++ b/drivers/char/drm/i830_irq.c @@ -144,7 +144,7 @@ int i830_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i830_private_t *dev_priv = dev->dev_private; - drm_i830_irq_wait_t *irqwait = data; + drm_i830_irq_wait_t *irqwait = data; if (!dev_priv) { DRM_ERROR("%s called with no initialization\n", __FUNCTION__); diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c index e61a43e5b3a..43986d81ae3 100644 --- a/drivers/char/drm/i915_dma.c +++ b/drivers/char/drm/i915_dma.c @@ -31,17 +31,6 @@ #include "i915_drm.h" #include "i915_drv.h" -#define IS_I965G(dev) (dev->pci_device == 0x2972 || \ - dev->pci_device == 0x2982 || \ - dev->pci_device == 0x2992 || \ - dev->pci_device == 0x29A2 || \ - dev->pci_device == 0x2A02 || \ - dev->pci_device == 0x2A12) - -#define IS_G33(dev) (dev->pci_device == 0x29b2 || \ - dev->pci_device == 0x29c2 || \ - dev->pci_device == 0x29d2) - /* Really want an OS-independent resettable timer. Would like to have * this loop run for (eg) 3 sec, but have the timer reset every time * the head pointer changes, so that EBUSY only happens if the ring @@ -90,6 +79,7 @@ void i915_kernel_lost_context(struct drm_device * dev) static int i915_dma_cleanup(struct drm_device * dev) { + drm_i915_private_t *dev_priv = dev->dev_private; /* Make sure interrupts are disabled here because the uninstall ioctl * may not have been called from userspace and after dev_private * is freed, it's too late. @@ -97,52 +87,42 @@ static int i915_dma_cleanup(struct drm_device * dev) if (dev->irq) drm_irq_uninstall(dev); - if (dev->dev_private) { - drm_i915_private_t *dev_priv = - (drm_i915_private_t *) dev->dev_private; - - if (dev_priv->ring.virtual_start) { - drm_core_ioremapfree(&dev_priv->ring.map, dev); - } - - if (dev_priv->status_page_dmah) { - drm_pci_free(dev, dev_priv->status_page_dmah); - /* Need to rewrite hardware status page */ - I915_WRITE(0x02080, 0x1ffff000); - } - - if (dev_priv->status_gfx_addr) { - dev_priv->status_gfx_addr = 0; - drm_core_ioremapfree(&dev_priv->hws_map, dev); - I915_WRITE(0x2080, 0x1ffff000); - } + if (dev_priv->ring.virtual_start) { + drm_core_ioremapfree(&dev_priv->ring.map, dev); + dev_priv->ring.virtual_start = 0; + dev_priv->ring.map.handle = 0; + dev_priv->ring.map.size = 0; + } - drm_free(dev->dev_private, sizeof(drm_i915_private_t), - DRM_MEM_DRIVER); + if (dev_priv->status_page_dmah) { + drm_pci_free(dev, dev_priv->status_page_dmah); + dev_priv->status_page_dmah = NULL; + /* Need to rewrite hardware status page */ + I915_WRITE(0x02080, 0x1ffff000); + } - dev->dev_private = NULL; + if (dev_priv->status_gfx_addr) { + dev_priv->status_gfx_addr = 0; + drm_core_ioremapfree(&dev_priv->hws_map, dev); + I915_WRITE(0x2080, 0x1ffff000); } return 0; } -static int i915_initialize(struct drm_device * dev, - drm_i915_private_t * dev_priv, - drm_i915_init_t * init) +static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init) { - memset(dev_priv, 0, sizeof(drm_i915_private_t)); + drm_i915_private_t *dev_priv = dev->dev_private; dev_priv->sarea = drm_getsarea(dev); if (!dev_priv->sarea) { DRM_ERROR("can not find sarea!\n"); - dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); return -EINVAL; } dev_priv->mmio_map = drm_core_findmap(dev, init->mmio_offset); if (!dev_priv->mmio_map) { - dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); DRM_ERROR("can not find mmio map!\n"); return -EINVAL; @@ -165,7 +145,6 @@ static int i915_initialize(struct drm_device * dev, drm_core_ioremap(&dev_priv->ring.map, dev); if (dev_priv->ring.map.handle == NULL) { - dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); DRM_ERROR("can not ioremap virtual address for" " ring buffer\n"); @@ -197,7 +176,6 @@ static int i915_initialize(struct drm_device * dev, drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff); if (!dev_priv->status_page_dmah) { - dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); DRM_ERROR("Can not allocate hardware status page\n"); return -ENOMEM; @@ -209,7 +187,6 @@ static int i915_initialize(struct drm_device * dev, I915_WRITE(0x02080, dev_priv->dma_status_page); } DRM_DEBUG("Enabled hardware status page\n"); - dev->dev_private = (void *)dev_priv; return 0; } @@ -254,17 +231,12 @@ static int i915_dma_resume(struct drm_device * dev) static int i915_dma_init(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv; drm_i915_init_t *init = data; int retcode = 0; switch (init->func) { case I915_INIT_DMA: - dev_priv = drm_alloc(sizeof(drm_i915_private_t), - DRM_MEM_DRIVER); - if (dev_priv == NULL) - return -ENOMEM; - retcode = i915_initialize(dev, dev_priv, init); + retcode = i915_initialize(dev, init); break; case I915_CLEANUP_DMA: retcode = i915_dma_cleanup(dev); @@ -351,7 +323,7 @@ static int validate_cmd(int cmd) { int ret = do_validate_cmd(cmd); -/* printk("validate_cmd( %x ): %d\n", cmd, ret); */ +/* printk("validate_cmd( %x ): %d\n", cmd, ret); */ return ret; } @@ -685,7 +657,7 @@ static int i915_getparam(struct drm_device *dev, void *data, int value; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -719,7 +691,7 @@ static int i915_setparam(struct drm_device *dev, void *data, drm_i915_setparam_t *param = data; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -749,7 +721,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data, drm_i915_hws_addr_t *hws = data; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -757,7 +729,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data, dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12); - dev_priv->hws_map.offset = dev->agp->agp_info.aper_base + hws->addr; + dev_priv->hws_map.offset = dev->agp->base + hws->addr; dev_priv->hws_map.size = 4*1024; dev_priv->hws_map.type = 0; dev_priv->hws_map.flags = 0; @@ -765,7 +737,6 @@ static int i915_set_status_page(struct drm_device *dev, void *data, drm_core_ioremap(&dev_priv->hws_map, dev); if (dev_priv->hws_map.handle == NULL) { - dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); dev_priv->status_gfx_addr = 0; DRM_ERROR("can not ioremap virtual address for" @@ -784,6 +755,10 @@ static int i915_set_status_page(struct drm_device *dev, void *data, int i915_driver_load(struct drm_device *dev, unsigned long flags) { + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long base, size; + int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1; + /* i915 has 4 more counters */ dev->counters += 4; dev->types[6] = _DRM_STAT_IRQ; @@ -791,24 +766,51 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev->types[8] = _DRM_STAT_SECONDARY; dev->types[9] = _DRM_STAT_DMA; + dev_priv = drm_alloc(sizeof(drm_i915_private_t), DRM_MEM_DRIVER); + if (dev_priv == NULL) + return -ENOMEM; + + memset(dev_priv, 0, sizeof(drm_i915_private_t)); + + dev->dev_private = (void *)dev_priv; + + /* Add register map (needed for suspend/resume) */ + base = drm_get_resource_start(dev, mmio_bar); + size = drm_get_resource_len(dev, mmio_bar); + + ret = drm_addmap(dev, base, size, _DRM_REGISTERS, + _DRM_KERNEL | _DRM_DRIVER, + &dev_priv->mmio_map); + return ret; +} + +int i915_driver_unload(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (dev_priv->mmio_map) + drm_rmmap(dev, dev_priv->mmio_map); + + drm_free(dev->dev_private, sizeof(drm_i915_private_t), + DRM_MEM_DRIVER); + return 0; } void i915_driver_lastclose(struct drm_device * dev) { - if (dev->dev_private) { - drm_i915_private_t *dev_priv = dev->dev_private; + drm_i915_private_t *dev_priv = dev->dev_private; + + if (dev_priv->agp_heap) i915_mem_takedown(&(dev_priv->agp_heap)); - } + i915_dma_cleanup(dev); } void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv) { - if (dev->dev_private) { - drm_i915_private_t *dev_priv = dev->dev_private; - i915_mem_release(dev, file_priv, dev_priv->agp_heap); - } + drm_i915_private_t *dev_priv = dev->dev_private; + i915_mem_release(dev, file_priv, dev_priv->agp_heap); } struct drm_ioctl_desc i915_ioctls[] = { diff --git a/drivers/char/drm/i915_drv.c b/drivers/char/drm/i915_drv.c index 85bcc276f80..52e51033d32 100644 --- a/drivers/char/drm/i915_drv.c +++ b/drivers/char/drm/i915_drv.c @@ -38,6 +38,465 @@ static struct pci_device_id pciidlist[] = { i915_PCI_IDS }; +enum pipe { + PIPE_A = 0, + PIPE_B, +}; + +static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (pipe == PIPE_A) + return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE); + else + return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE); +} + +static void i915_save_palette(struct drm_device *dev, enum pipe pipe) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B); + u32 *array; + int i; + + if (!i915_pipe_enabled(dev, pipe)) + return; + + if (pipe == PIPE_A) + array = dev_priv->save_palette_a; + else + array = dev_priv->save_palette_b; + + for(i = 0; i < 256; i++) + array[i] = I915_READ(reg + (i << 2)); +} + +static void i915_restore_palette(struct drm_device *dev, enum pipe pipe) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B); + u32 *array; + int i; + + if (!i915_pipe_enabled(dev, pipe)) + return; + + if (pipe == PIPE_A) + array = dev_priv->save_palette_a; + else + array = dev_priv->save_palette_b; + + for(i = 0; i < 256; i++) + I915_WRITE(reg + (i << 2), array[i]); +} + +static u8 i915_read_indexed(u16 index_port, u16 data_port, u8 reg) +{ + outb(reg, index_port); + return inb(data_port); +} + +static u8 i915_read_ar(u16 st01, u8 reg, u16 palette_enable) +{ + inb(st01); + outb(palette_enable | reg, VGA_AR_INDEX); + return inb(VGA_AR_DATA_READ); +} + +static void i915_write_ar(u8 st01, u8 reg, u8 val, u16 palette_enable) +{ + inb(st01); + outb(palette_enable | reg, VGA_AR_INDEX); + outb(val, VGA_AR_DATA_WRITE); +} + +static void i915_write_indexed(u16 index_port, u16 data_port, u8 reg, u8 val) +{ + outb(reg, index_port); + outb(val, data_port); +} + +static void i915_save_vga(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + u16 cr_index, cr_data, st01; + + /* VGA color palette registers */ + dev_priv->saveDACMASK = inb(VGA_DACMASK); + /* DACCRX automatically increments during read */ + outb(0, VGA_DACRX); + /* Read 3 bytes of color data from each index */ + for (i = 0; i < 256 * 3; i++) + dev_priv->saveDACDATA[i] = inb(VGA_DACDATA); + + /* MSR bits */ + dev_priv->saveMSR = inb(VGA_MSR_READ); + if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) { + cr_index = VGA_CR_INDEX_CGA; + cr_data = VGA_CR_DATA_CGA; + st01 = VGA_ST01_CGA; + } else { + cr_index = VGA_CR_INDEX_MDA; + cr_data = VGA_CR_DATA_MDA; + st01 = VGA_ST01_MDA; + } + + /* CRT controller regs */ + i915_write_indexed(cr_index, cr_data, 0x11, + i915_read_indexed(cr_index, cr_data, 0x11) & + (~0x80)); + for (i = 0; i < 0x24; i++) + dev_priv->saveCR[i] = + i915_read_indexed(cr_index, cr_data, i); + /* Make sure we don't turn off CR group 0 writes */ + dev_priv->saveCR[0x11] &= ~0x80; + + /* Attribute controller registers */ + inb(st01); + dev_priv->saveAR_INDEX = inb(VGA_AR_INDEX); + for (i = 0; i < 20; i++) + dev_priv->saveAR[i] = i915_read_ar(st01, i, 0); + inb(st01); + outb(dev_priv->saveAR_INDEX, VGA_AR_INDEX); + + /* Graphics controller registers */ + for (i = 0; i < 9; i++) + dev_priv->saveGR[i] = + i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, i); + + dev_priv->saveGR[0x10] = + i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x10); + dev_priv->saveGR[0x11] = + i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x11); + dev_priv->saveGR[0x18] = + i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x18); + + /* Sequencer registers */ + for (i = 0; i < 8; i++) + dev_priv->saveSR[i] = + i915_read_indexed(VGA_SR_INDEX, VGA_SR_DATA, i); +} + +static void i915_restore_vga(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + u16 cr_index, cr_data, st01; + + /* MSR bits */ + outb(dev_priv->saveMSR, VGA_MSR_WRITE); + if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) { + cr_index = VGA_CR_INDEX_CGA; + cr_data = VGA_CR_DATA_CGA; + st01 = VGA_ST01_CGA; + } else { + cr_index = VGA_CR_INDEX_MDA; + cr_data = VGA_CR_DATA_MDA; + st01 = VGA_ST01_MDA; + } + + /* Sequencer registers, don't write SR07 */ + for (i = 0; i < 7; i++) + i915_write_indexed(VGA_SR_INDEX, VGA_SR_DATA, i, + dev_priv->saveSR[i]); + + /* CRT controller regs */ + /* Enable CR group 0 writes */ + i915_write_indexed(cr_index, cr_data, 0x11, dev_priv->saveCR[0x11]); + for (i = 0; i < 0x24; i++) + i915_write_indexed(cr_index, cr_data, i, dev_priv->saveCR[i]); + + /* Graphics controller regs */ + for (i = 0; i < 9; i++) + i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, i, + dev_priv->saveGR[i]); + + i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x10, + dev_priv->saveGR[0x10]); + i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x11, + dev_priv->saveGR[0x11]); + i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x18, + dev_priv->saveGR[0x18]); + + /* Attribute controller registers */ + for (i = 0; i < 20; i++) + i915_write_ar(st01, i, dev_priv->saveAR[i], 0); + inb(st01); /* switch back to index mode */ + outb(dev_priv->saveAR_INDEX | 0x20, VGA_AR_INDEX); + + /* VGA color palette registers */ + outb(dev_priv->saveDACMASK, VGA_DACMASK); + /* DACCRX automatically increments during read */ + outb(0, VGA_DACWX); + /* Read 3 bytes of color data from each index */ + for (i = 0; i < 256 * 3; i++) + outb(dev_priv->saveDACDATA[i], VGA_DACDATA); + +} + +static int i915_suspend(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + + if (!dev || !dev_priv) { + printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv); + printk(KERN_ERR "DRM not initialized, aborting suspend.\n"); + return -ENODEV; + } + + pci_save_state(dev->pdev); + pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); + + /* Pipe & plane A info */ + dev_priv->savePIPEACONF = I915_READ(PIPEACONF); + dev_priv->savePIPEASRC = I915_READ(PIPEASRC); + dev_priv->saveFPA0 = I915_READ(FPA0); + dev_priv->saveFPA1 = I915_READ(FPA1); + dev_priv->saveDPLL_A = I915_READ(DPLL_A); + if (IS_I965G(dev)) + dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD); + dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A); + dev_priv->saveHBLANK_A = I915_READ(HBLANK_A); + dev_priv->saveHSYNC_A = I915_READ(HSYNC_A); + dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A); + dev_priv->saveVBLANK_A = I915_READ(VBLANK_A); + dev_priv->saveVSYNC_A = I915_READ(VSYNC_A); + dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + + dev_priv->saveDSPACNTR = I915_READ(DSPACNTR); + dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE); + dev_priv->saveDSPASIZE = I915_READ(DSPASIZE); + dev_priv->saveDSPAPOS = I915_READ(DSPAPOS); + dev_priv->saveDSPABASE = I915_READ(DSPABASE); + if (IS_I965G(dev)) { + dev_priv->saveDSPASURF = I915_READ(DSPASURF); + dev_priv->saveDSPATILEOFF = I915_READ(DSPATILEOFF); + } + i915_save_palette(dev, PIPE_A); + + /* Pipe & plane B info */ + dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF); + dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC); + dev_priv->saveFPB0 = I915_READ(FPB0); + dev_priv->saveFPB1 = I915_READ(FPB1); + dev_priv->saveDPLL_B = I915_READ(DPLL_B); + if (IS_I965G(dev)) + dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD); + dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B); + dev_priv->saveHBLANK_B = I915_READ(HBLANK_B); + dev_priv->saveHSYNC_B = I915_READ(HSYNC_B); + dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B); + dev_priv->saveVBLANK_B = I915_READ(VBLANK_B); + dev_priv->saveVSYNC_B = I915_READ(VSYNC_B); + dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + + dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR); + dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE); + dev_priv->saveDSPBSIZE = I915_READ(DSPBSIZE); + dev_priv->saveDSPBPOS = I915_READ(DSPBPOS); + dev_priv->saveDSPBBASE = I915_READ(DSPBBASE); + if (IS_I965GM(dev) || IS_IGD_GM(dev)) { + dev_priv->saveDSPBSURF = I915_READ(DSPBSURF); + dev_priv->saveDSPBTILEOFF = I915_READ(DSPBTILEOFF); + } + i915_save_palette(dev, PIPE_B); + + /* CRT state */ + dev_priv->saveADPA = I915_READ(ADPA); + + /* LVDS state */ + dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); + dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + if (IS_I965G(dev)) + dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); + if (IS_MOBILE(dev) && !IS_I830(dev)) + dev_priv->saveLVDS = I915_READ(LVDS); + if (!IS_I830(dev) && !IS_845G(dev)) + dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL); + dev_priv->saveLVDSPP_ON = I915_READ(LVDSPP_ON); + dev_priv->saveLVDSPP_OFF = I915_READ(LVDSPP_OFF); + dev_priv->savePP_CYCLE = I915_READ(PP_CYCLE); + + /* FIXME: save TV & SDVO state */ + + /* FBC state */ + dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE); + dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE); + dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2); + dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL); + + /* VGA state */ + dev_priv->saveVCLK_DIVISOR_VGA0 = I915_READ(VCLK_DIVISOR_VGA0); + dev_priv->saveVCLK_DIVISOR_VGA1 = I915_READ(VCLK_DIVISOR_VGA1); + dev_priv->saveVCLK_POST_DIV = I915_READ(VCLK_POST_DIV); + dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); + + /* Scratch space */ + for (i = 0; i < 16; i++) { + dev_priv->saveSWF0[i] = I915_READ(SWF0 + (i << 2)); + dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2)); + } + for (i = 0; i < 3; i++) + dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2)); + + i915_save_vga(dev); + + /* Shut down the device */ + pci_disable_device(dev->pdev); + pci_set_power_state(dev->pdev, PCI_D3hot); + + return 0; +} + +static int i915_resume(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + + pci_set_power_state(dev->pdev, PCI_D0); + pci_restore_state(dev->pdev); + if (pci_enable_device(dev->pdev)) + return -1; + + pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); + + /* Pipe & plane A info */ + /* Prime the clock */ + if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { + I915_WRITE(DPLL_A, dev_priv->saveDPLL_A & + ~DPLL_VCO_ENABLE); + udelay(150); + } + I915_WRITE(FPA0, dev_priv->saveFPA0); + I915_WRITE(FPA1, dev_priv->saveFPA1); + /* Actually enable it */ + I915_WRITE(DPLL_A, dev_priv->saveDPLL_A); + udelay(150); + if (IS_I965G(dev)) + I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD); + udelay(150); + + /* Restore mode */ + I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A); + I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A); + I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A); + I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A); + I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A); + I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A); + I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); + + /* Restore plane info */ + I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); + I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS); + I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC); + I915_WRITE(DSPABASE, dev_priv->saveDSPABASE); + I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE); + if (IS_I965G(dev)) { + I915_WRITE(DSPASURF, dev_priv->saveDSPASURF); + I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF); + } + + if ((dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) && + (dev_priv->saveDPLL_A & DPLL_VGA_MODE_DIS)) + I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF); + + i915_restore_palette(dev, PIPE_A); + /* Enable the plane */ + I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR); + I915_WRITE(DSPABASE, I915_READ(DSPABASE)); + + /* Pipe & plane B info */ + if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { + I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & + ~DPLL_VCO_ENABLE); + udelay(150); + } + I915_WRITE(FPB0, dev_priv->saveFPB0); + I915_WRITE(FPB1, dev_priv->saveFPB1); + /* Actually enable it */ + I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); + udelay(150); + if (IS_I965G(dev)) + I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); + udelay(150); + + /* Restore mode */ + I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B); + I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B); + I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B); + I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B); + I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B); + I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B); + I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); + + /* Restore plane info */ + I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); + I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS); + I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC); + I915_WRITE(DSPBBASE, dev_priv->saveDSPBBASE); + I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE); + if (IS_I965G(dev)) { + I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF); + I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF); + } + + if ((dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) && + (dev_priv->saveDPLL_B & DPLL_VGA_MODE_DIS)) + I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF); + i915_restore_palette(dev, PIPE_A); + /* Enable the plane */ + I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); + I915_WRITE(DSPBBASE, I915_READ(DSPBBASE)); + + /* CRT state */ + I915_WRITE(ADPA, dev_priv->saveADPA); + + /* LVDS state */ + if (IS_I965G(dev)) + I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2); + if (IS_MOBILE(dev) && !IS_I830(dev)) + I915_WRITE(LVDS, dev_priv->saveLVDS); + if (!IS_I830(dev) && !IS_845G(dev)) + I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL); + + I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); + I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(LVDSPP_ON, dev_priv->saveLVDSPP_ON); + I915_WRITE(LVDSPP_OFF, dev_priv->saveLVDSPP_OFF); + I915_WRITE(PP_CYCLE, dev_priv->savePP_CYCLE); + I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + + /* FIXME: restore TV & SDVO state */ + + /* FBC info */ + I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE); + I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE); + I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2); + I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL); + + /* VGA state */ + I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); + I915_WRITE(VCLK_DIVISOR_VGA0, dev_priv->saveVCLK_DIVISOR_VGA0); + I915_WRITE(VCLK_DIVISOR_VGA1, dev_priv->saveVCLK_DIVISOR_VGA1); + I915_WRITE(VCLK_POST_DIV, dev_priv->saveVCLK_POST_DIV); + udelay(150); + + for (i = 0; i < 16; i++) { + I915_WRITE(SWF0 + (i << 2), dev_priv->saveSWF0[i]); + I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i+7]); + } + for (i = 0; i < 3; i++) + I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]); + + i915_restore_vga(dev); + + return 0; +} + static struct drm_driver driver = { /* don't use mtrr's here, the Xserver or user space app should * deal with them for intel hardware. @@ -47,8 +506,11 @@ static struct drm_driver driver = { DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL | DRIVER_IRQ_VBL2, .load = i915_driver_load, + .unload = i915_driver_unload, .lastclose = i915_driver_lastclose, .preclose = i915_driver_preclose, + .suspend = i915_suspend, + .resume = i915_resume, .device_is_agp = i915_driver_device_is_agp, .vblank_wait = i915_driver_vblank_wait, .vblank_wait2 = i915_driver_vblank_wait2, @@ -77,7 +539,7 @@ static struct drm_driver driver = { .name = DRIVER_NAME, .id_table = pciidlist, }, - + .name = DRIVER_NAME, .desc = DRIVER_DESC, .date = DRIVER_DATE, diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index e064292e703..f8308bfb261 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -114,6 +114,85 @@ typedef struct drm_i915_private { spinlock_t swaps_lock; drm_i915_vbl_swap_t vbl_swaps; unsigned int swaps_pending; + + /* Register state */ + u8 saveLBB; + u32 saveDSPACNTR; + u32 saveDSPBCNTR; + u32 savePIPEACONF; + u32 savePIPEBCONF; + u32 savePIPEASRC; + u32 savePIPEBSRC; + u32 saveFPA0; + u32 saveFPA1; + u32 saveDPLL_A; + u32 saveDPLL_A_MD; + u32 saveHTOTAL_A; + u32 saveHBLANK_A; + u32 saveHSYNC_A; + u32 saveVTOTAL_A; + u32 saveVBLANK_A; + u32 saveVSYNC_A; + u32 saveBCLRPAT_A; + u32 saveDSPASTRIDE; + u32 saveDSPASIZE; + u32 saveDSPAPOS; + u32 saveDSPABASE; + u32 saveDSPASURF; + u32 saveDSPATILEOFF; + u32 savePFIT_PGM_RATIOS; + u32 saveBLC_PWM_CTL; + u32 saveBLC_PWM_CTL2; + u32 saveFPB0; + u32 saveFPB1; + u32 saveDPLL_B; + u32 saveDPLL_B_MD; + u32 saveHTOTAL_B; + u32 saveHBLANK_B; + u32 saveHSYNC_B; + u32 saveVTOTAL_B; + u32 saveVBLANK_B; + u32 saveVSYNC_B; + u32 saveBCLRPAT_B; + u32 saveDSPBSTRIDE; + u32 saveDSPBSIZE; + u32 saveDSPBPOS; + u32 saveDSPBBASE; + u32 saveDSPBSURF; + u32 saveDSPBTILEOFF; + u32 saveVCLK_DIVISOR_VGA0; + u32 saveVCLK_DIVISOR_VGA1; + u32 saveVCLK_POST_DIV; + u32 saveVGACNTRL; + u32 saveADPA; + u32 saveLVDS; + u32 saveLVDSPP_ON; + u32 saveLVDSPP_OFF; + u32 saveDVOA; + u32 saveDVOB; + u32 saveDVOC; + u32 savePP_ON; + u32 savePP_OFF; + u32 savePP_CONTROL; + u32 savePP_CYCLE; + u32 savePFIT_CONTROL; + u32 save_palette_a[256]; + u32 save_palette_b[256]; + u32 saveFBC_CFB_BASE; + u32 saveFBC_LL_BASE; + u32 saveFBC_CONTROL; + u32 saveFBC_CONTROL2; + u32 saveSWF0[16]; + u32 saveSWF1[16]; + u32 saveSWF2[3]; + u8 saveMSR; + u8 saveSR[8]; + u8 saveGR[25]; + u8 saveAR_INDEX; + u8 saveAR[20]; + u8 saveDACMASK; + u8 saveDACDATA[256*3]; /* 256 3-byte colors */ + u8 saveCR[36]; } drm_i915_private_t; extern struct drm_ioctl_desc i915_ioctls[]; @@ -122,6 +201,7 @@ extern int i915_max_ioctl; /* i915_dma.c */ extern void i915_kernel_lost_context(struct drm_device * dev); extern int i915_driver_load(struct drm_device *, unsigned long flags); +extern int i915_driver_unload(struct drm_device *); extern void i915_driver_lastclose(struct drm_device * dev); extern void i915_driver_preclose(struct drm_device *dev, struct drm_file *file_priv); @@ -163,7 +243,7 @@ extern void i915_mem_release(struct drm_device * dev, #define I915_READ(reg) DRM_READ32(dev_priv->mmio_map, (reg)) #define I915_WRITE(reg,val) DRM_WRITE32(dev_priv->mmio_map, (reg), (val)) -#define I915_READ16(reg) DRM_READ16(dev_priv->mmio_map, (reg)) +#define I915_READ16(reg) DRM_READ16(dev_priv->mmio_map, (reg)) #define I915_WRITE16(reg,val) DRM_WRITE16(dev_priv->mmio_map, (reg), (val)) #define I915_VERBOSE 0 @@ -173,9 +253,8 @@ extern void i915_mem_release(struct drm_device * dev, #define BEGIN_LP_RING(n) do { \ if (I915_VERBOSE) \ - DRM_DEBUG("BEGIN_LP_RING(%d) in %s\n", \ - (n), __FUNCTION__); \ - if (dev_priv->ring.space < (n)*4) \ + DRM_DEBUG("BEGIN_LP_RING(%d)\n", (n)); \ + if (dev_priv->ring.space < (n)*4) \ i915_wait_ring(dev, (n)*4, __FUNCTION__); \ outcount = 0; \ outring = dev_priv->ring.tail; \ @@ -200,7 +279,51 @@ extern void i915_mem_release(struct drm_device * dev, extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); -#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) +/* Extended config space */ +#define LBB 0xf4 + +/* VGA stuff */ + +#define VGA_ST01_MDA 0x3ba +#define VGA_ST01_CGA 0x3da + +#define VGA_MSR_WRITE 0x3c2 +#define VGA_MSR_READ 0x3cc +#define VGA_MSR_MEM_EN (1<<1) +#define VGA_MSR_CGA_MODE (1<<0) + +#define VGA_SR_INDEX 0x3c4 +#define VGA_SR_DATA 0x3c5 + +#define VGA_AR_INDEX 0x3c0 +#define VGA_AR_VID_EN (1<<5) +#define VGA_AR_DATA_WRITE 0x3c0 +#define VGA_AR_DATA_READ 0x3c1 + +#define VGA_GR_INDEX 0x3ce +#define VGA_GR_DATA 0x3cf +/* GR05 */ +#define VGA_GR_MEM_READ_MODE_SHIFT 3 +#define VGA_GR_MEM_READ_MODE_PLANE 1 +/* GR06 */ +#define VGA_GR_MEM_MODE_MASK 0xc +#define VGA_GR_MEM_MODE_SHIFT 2 +#define VGA_GR_MEM_A0000_AFFFF 0 +#define VGA_GR_MEM_A0000_BFFFF 1 +#define VGA_GR_MEM_B0000_B7FFF 2 +#define VGA_GR_MEM_B0000_BFFFF 3 + +#define VGA_DACMASK 0x3c6 +#define VGA_DACRX 0x3c7 +#define VGA_DACWX 0x3c8 +#define VGA_DACDATA 0x3c9 + +#define VGA_CR_INDEX_MDA 0x3b4 +#define VGA_CR_DATA_MDA 0x3b5 +#define VGA_CR_INDEX_CGA 0x3d4 +#define VGA_CR_DATA_CGA 0x3d5 + +#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) #define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23)) #define CMD_REPORT_HEAD (7<<23) #define CMD_STORE_DWORD_IDX ((0x21<<23) | 0x1) @@ -215,9 +338,47 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define BB1_UNPROTECTED (0<<0) #define BB2_END_ADDR_MASK (~0x7) +/* Framebuffer compression */ +#define FBC_CFB_BASE 0x03200 /* 4k page aligned */ +#define FBC_LL_BASE 0x03204 /* 4k page aligned */ +#define FBC_CONTROL 0x03208 +#define FBC_CTL_EN (1<<31) +#define FBC_CTL_PERIODIC (1<<30) +#define FBC_CTL_INTERVAL_SHIFT (16) +#define FBC_CTL_UNCOMPRESSIBLE (1<<14) +#define FBC_CTL_STRIDE_SHIFT (5) +#define FBC_CTL_FENCENO (1<<0) +#define FBC_COMMAND 0x0320c +#define FBC_CMD_COMPRESS (1<<0) +#define FBC_STATUS 0x03210 +#define FBC_STAT_COMPRESSING (1<<31) +#define FBC_STAT_COMPRESSED (1<<30) +#define FBC_STAT_MODIFIED (1<<29) +#define FBC_STAT_CURRENT_LINE (1<<0) +#define FBC_CONTROL2 0x03214 +#define FBC_CTL_FENCE_DBL (0<<4) +#define FBC_CTL_IDLE_IMM (0<<2) +#define FBC_CTL_IDLE_FULL (1<<2) +#define FBC_CTL_IDLE_LINE (2<<2) +#define FBC_CTL_IDLE_DEBUG (3<<2) +#define FBC_CTL_CPU_FENCE (1<<1) +#define FBC_CTL_PLANEA (0<<0) +#define FBC_CTL_PLANEB (1<<0) +#define FBC_FENCE_OFF 0x0321b + +#define FBC_LL_SIZE (1536) +#define FBC_LL_PAD (32) + +/* Interrupt bits: + */ +#define USER_INT_FLAG (1<<1) +#define VSYNC_PIPEB_FLAG (1<<5) +#define VSYNC_PIPEA_FLAG (1<<7) +#define HWB_OOM_FLAG (1<<13) /* binner out of memory */ + #define I915REG_HWSTAM 0x02098 #define I915REG_INT_IDENTITY_R 0x020a4 -#define I915REG_INT_MASK_R 0x020a8 +#define I915REG_INT_MASK_R 0x020a8 #define I915REG_INT_ENABLE_R 0x020a0 #define I915REG_PIPEASTAT 0x70024 @@ -229,7 +390,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define SRX_INDEX 0x3c4 #define SRX_DATA 0x3c5 #define SR01 1 -#define SR01_SCREEN_OFF (1<<5) +#define SR01_SCREEN_OFF (1<<5) #define PPCR 0x61204 #define PPCR_ON (1<<0) @@ -249,31 +410,129 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define ADPA_DPMS_OFF (3<<10) #define NOPID 0x2094 -#define LP_RING 0x2030 -#define HP_RING 0x2040 -#define RING_TAIL 0x00 +#define LP_RING 0x2030 +#define HP_RING 0x2040 +/* The binner has its own ring buffer: + */ +#define HWB_RING 0x2400 + +#define RING_TAIL 0x00 #define TAIL_ADDR 0x001FFFF8 -#define RING_HEAD 0x04 -#define HEAD_WRAP_COUNT 0xFFE00000 -#define HEAD_WRAP_ONE 0x00200000 -#define HEAD_ADDR 0x001FFFFC -#define RING_START 0x08 -#define START_ADDR 0x0xFFFFF000 -#define RING_LEN 0x0C -#define RING_NR_PAGES 0x001FF000 -#define RING_REPORT_MASK 0x00000006 -#define RING_REPORT_64K 0x00000002 -#define RING_REPORT_128K 0x00000004 -#define RING_NO_REPORT 0x00000000 -#define RING_VALID_MASK 0x00000001 -#define RING_VALID 0x00000001 -#define RING_INVALID 0x00000000 +#define RING_HEAD 0x04 +#define HEAD_WRAP_COUNT 0xFFE00000 +#define HEAD_WRAP_ONE 0x00200000 +#define HEAD_ADDR 0x001FFFFC +#define RING_START 0x08 +#define START_ADDR 0x0xFFFFF000 +#define RING_LEN 0x0C +#define RING_NR_PAGES 0x001FF000 +#define RING_REPORT_MASK 0x00000006 +#define RING_REPORT_64K 0x00000002 +#define RING_REPORT_128K 0x00000004 +#define RING_NO_REPORT 0x00000000 +#define RING_VALID_MASK 0x00000001 +#define RING_VALID 0x00000001 +#define RING_INVALID 0x00000000 + +/* Instruction parser error reg: + */ +#define IPEIR 0x2088 + +/* Scratch pad debug 0 reg: + */ +#define SCPD0 0x209c + +/* Error status reg: + */ +#define ESR 0x20b8 + +/* Secondary DMA fetch address debug reg: + */ +#define DMA_FADD_S 0x20d4 + +/* Cache mode 0 reg. + * - Manipulating render cache behaviour is central + * to the concept of zone rendering, tuning this reg can help avoid + * unnecessary render cache reads and even writes (for z/stencil) + * at beginning and end of scene. + * + * - To change a bit, write to this reg with a mask bit set and the + * bit of interest either set or cleared. EG: (BIT<<16) | BIT to set. + */ +#define Cache_Mode_0 0x2120 +#define CM0_MASK_SHIFT 16 +#define CM0_IZ_OPT_DISABLE (1<<6) +#define CM0_ZR_OPT_DISABLE (1<<5) +#define CM0_DEPTH_EVICT_DISABLE (1<<4) +#define CM0_COLOR_EVICT_DISABLE (1<<3) +#define CM0_DEPTH_WRITE_DISABLE (1<<1) +#define CM0_RC_OP_FLUSH_DISABLE (1<<0) + + +/* Graphics flush control. A CPU write flushes the GWB of all writes. + * The data is discarded. + */ +#define GFX_FLSH_CNTL 0x2170 + +/* Binner control. Defines the location of the bin pointer list: + */ +#define BINCTL 0x2420 +#define BC_MASK (1 << 9) + +/* Binned scene info. + */ +#define BINSCENE 0x2428 +#define BS_OP_LOAD (1 << 8) +#define BS_MASK (1 << 22) + +/* Bin command parser debug reg: + */ +#define BCPD 0x2480 + +/* Bin memory control debug reg: + */ +#define BMCD 0x2484 + +/* Bin data cache debug reg: + */ +#define BDCD 0x2488 + +/* Binner pointer cache debug reg: + */ +#define BPCD 0x248c + +/* Binner scratch pad debug reg: + */ +#define BINSKPD 0x24f0 + +/* HWB scratch pad debug reg: + */ +#define HWBSKPD 0x24f4 + +/* Binner memory pool reg: + */ +#define BMP_BUFFER 0x2430 +#define BMP_PAGE_SIZE_4K (0 << 10) +#define BMP_BUFFER_SIZE_SHIFT 1 +#define BMP_ENABLE (1 << 0) + +/* Get/put memory from the binner memory pool: + */ +#define BMP_GET 0x2438 +#define BMP_PUT 0x2440 +#define BMP_OFFSET_SHIFT 5 + +/* 3D state packets: + */ +#define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24)) #define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) #define SC_UPDATE_SCISSOR (0x1<<1) #define SC_ENABLE_MASK (0x1<<0) #define SC_ENABLE (0x1<<0) +#define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16)) + #define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1)) #define SCI_YMIN_MASK (0xffff<<16) #define SCI_XMIN_MASK (0xffff<<0) @@ -290,17 +549,19 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2) +#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) #define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) #define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) #define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) -#define MI_BATCH_BUFFER ((0x30<<23)|1) -#define MI_BATCH_BUFFER_START (0x31<<23) -#define MI_BATCH_BUFFER_END (0xA<<23) +#define MI_BATCH_BUFFER ((0x30<<23)|1) +#define MI_BATCH_BUFFER_START (0x31<<23) +#define MI_BATCH_BUFFER_END (0xA<<23) #define MI_BATCH_NON_SECURE (1) #define MI_BATCH_NON_SECURE_I965 (1<<8) #define MI_WAIT_FOR_EVENT ((0x3<<23)) +#define MI_WAIT_FOR_PLANE_B_FLIP (1<<6) #define MI_WAIT_FOR_PLANE_A_FLIP (1<<2) #define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1) @@ -308,9 +569,538 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2) #define ASYNC_FLIP (1<<22) +#define DISPLAY_PLANE_A (0<<20) +#define DISPLAY_PLANE_B (1<<20) + +/* Display regs */ +#define DSPACNTR 0x70180 +#define DSPBCNTR 0x71180 +#define DISPPLANE_SEL_PIPE_MASK (1<<24) + +/* Define the region of interest for the binner: + */ +#define CMD_OP_BIN_CONTROL ((0x3<<29)|(0x1d<<24)|(0x84<<16)|4) #define CMD_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1) -#define READ_BREADCRUMB(dev_priv) (((u32 *)(dev_priv->hw_status_page))[5]) +#define CMD_MI_FLUSH (0x04 << 23) +#define MI_NO_WRITE_FLUSH (1 << 2) +#define MI_READ_FLUSH (1 << 0) +#define MI_EXE_FLUSH (1 << 1) +#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ +#define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ + +#define BREADCRUMB_BITS 31 +#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1) + +#define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5]) +#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) + +#define BLC_PWM_CTL 0x61254 +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) + +#define BLC_PWM_CTL2 0x61250 +/** + * This is the most significant 15 bits of the number of backlight cycles in a + * complete cycle of the modulated backlight control. + * + * The actual value is this field multiplied by two. + */ +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) +#define BLM_LEGACY_MODE (1 << 16) +/** + * This is the number of cycles out of the backlight modulation cycle for which + * the backlight is on. + * + * This field must be no greater than the number of cycles in the complete + * backlight modulation cycle. + */ +#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) +#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) + +#define I915_GCFGC 0xf0 +#define I915_LOW_FREQUENCY_ENABLE (1 << 7) +#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) +#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) +#define I915_DISPLAY_CLOCK_MASK (7 << 4) + +#define I855_HPLLCC 0xc0 +#define I855_CLOCK_CONTROL_MASK (3 << 0) +#define I855_CLOCK_133_200 (0 << 0) +#define I855_CLOCK_100_200 (1 << 0) +#define I855_CLOCK_100_133 (2 << 0) +#define I855_CLOCK_166_250 (3 << 0) + +/* p317, 319 + */ +#define VCLK2_VCO_M 0x6008 /* treat as 16 bit? (includes msbs) */ +#define VCLK2_VCO_N 0x600a +#define VCLK2_VCO_DIV_SEL 0x6012 + +#define VCLK_DIVISOR_VGA0 0x6000 +#define VCLK_DIVISOR_VGA1 0x6004 +#define VCLK_POST_DIV 0x6010 +/** Selects a post divisor of 4 instead of 2. */ +# define VGA1_PD_P2_DIV_4 (1 << 15) +/** Overrides the p2 post divisor field */ +# define VGA1_PD_P1_DIV_2 (1 << 13) +# define VGA1_PD_P1_SHIFT 8 +/** P1 value is 2 greater than this field */ +# define VGA1_PD_P1_MASK (0x1f << 8) +/** Selects a post divisor of 4 instead of 2. */ +# define VGA0_PD_P2_DIV_4 (1 << 7) +/** Overrides the p2 post divisor field */ +# define VGA0_PD_P1_DIV_2 (1 << 5) +# define VGA0_PD_P1_SHIFT 0 +/** P1 value is 2 greater than this field */ +# define VGA0_PD_P1_MASK (0x1f << 0) + +/* I830 CRTC registers */ +#define HTOTAL_A 0x60000 +#define HBLANK_A 0x60004 +#define HSYNC_A 0x60008 +#define VTOTAL_A 0x6000c +#define VBLANK_A 0x60010 +#define VSYNC_A 0x60014 +#define PIPEASRC 0x6001c +#define BCLRPAT_A 0x60020 +#define VSYNCSHIFT_A 0x60028 + +#define HTOTAL_B 0x61000 +#define HBLANK_B 0x61004 +#define HSYNC_B 0x61008 +#define VTOTAL_B 0x6100c +#define VBLANK_B 0x61010 +#define VSYNC_B 0x61014 +#define PIPEBSRC 0x6101c +#define BCLRPAT_B 0x61020 +#define VSYNCSHIFT_B 0x61028 + +#define PP_STATUS 0x61200 +# define PP_ON (1 << 31) +/** + * Indicates that all dependencies of the panel are on: + * + * - PLL enabled + * - pipe enabled + * - LVDS/DVOB/DVOC on + */ +# define PP_READY (1 << 30) +# define PP_SEQUENCE_NONE (0 << 28) +# define PP_SEQUENCE_ON (1 << 28) +# define PP_SEQUENCE_OFF (2 << 28) +# define PP_SEQUENCE_MASK 0x30000000 +#define PP_CONTROL 0x61204 +# define POWER_TARGET_ON (1 << 0) + +#define LVDSPP_ON 0x61208 +#define LVDSPP_OFF 0x6120c +#define PP_CYCLE 0x61210 + +#define PFIT_CONTROL 0x61230 +# define PFIT_ENABLE (1 << 31) +# define PFIT_PIPE_MASK (3 << 29) +# define PFIT_PIPE_SHIFT 29 +# define VERT_INTERP_DISABLE (0 << 10) +# define VERT_INTERP_BILINEAR (1 << 10) +# define VERT_INTERP_MASK (3 << 10) +# define VERT_AUTO_SCALE (1 << 9) +# define HORIZ_INTERP_DISABLE (0 << 6) +# define HORIZ_INTERP_BILINEAR (1 << 6) +# define HORIZ_INTERP_MASK (3 << 6) +# define HORIZ_AUTO_SCALE (1 << 5) +# define PANEL_8TO6_DITHER_ENABLE (1 << 3) + +#define PFIT_PGM_RATIOS 0x61234 +# define PFIT_VERT_SCALE_MASK 0xfff00000 +# define PFIT_HORIZ_SCALE_MASK 0x0000fff0 + +#define PFIT_AUTO_RATIOS 0x61238 + + +#define DPLL_A 0x06014 +#define DPLL_B 0x06018 +# define DPLL_VCO_ENABLE (1 << 31) +# define DPLL_DVO_HIGH_SPEED (1 << 30) +# define DPLL_SYNCLOCK_ENABLE (1 << 29) +# define DPLL_VGA_MODE_DIS (1 << 28) +# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ +# define DPLLB_MODE_LVDS (2 << 26) /* i915 */ +# define DPLL_MODE_MASK (3 << 26) +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ +# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ +# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ +/** + * The i830 generation, in DAC/serial mode, defines p1 as two plus this + * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 +/** + * The i830 generation, in LVDS mode, defines P1 as the bit number set within + * this field (only one bit may be set). + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 +# define DPLL_FPA01_P1_POST_DIV_SHIFT 16 +# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */ +# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ +# define PLL_REF_INPUT_DREFCLK (0 << 13) +# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ +# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ +# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) +# define PLL_REF_INPUT_MASK (3 << 13) +# define PLL_LOAD_PULSE_PHASE_SHIFT 9 +/* + * Parallel to Serial Load Pulse phase selection. + * Selects the phase for the 10X DPLL clock for the PCIe + * digital display port. The range is 4 to 13; 10 or more + * is just a flip delay. The default is 6 + */ +# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) +# define DISPLAY_RATE_SELECT_FPA1 (1 << 8) + +/** + * SDVO multiplier for 945G/GM. Not used on 965. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +# define SDVO_MULTIPLIER_MASK 0x000000ff +# define SDVO_MULTIPLIER_SHIFT_HIRES 4 +# define SDVO_MULTIPLIER_SHIFT_VGA 0 + +/** @defgroup DPLL_MD + * @{ + */ +/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_A_MD 0x0601c +/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_B_MD 0x06020 +/** + * UDI pixel divider, controlling how many pixels are stuffed into a packet. + * + * Value is pixels minus 1. Must be set to 1 pixel for SDVO. + */ +# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 +# define DPLL_MD_UDI_DIVIDER_SHIFT 24 +/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ +# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 +# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 +/** + * SDVO/UDI pixel multiplier. + * + * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus + * clock rate is 10 times the DPLL clock. At low resolution/refresh rate + * modes, the bus rate would be below the limits, so SDVO allows for stuffing + * dummy bytes in the datastream at an increased clock rate, with both sides of + * the link knowing how many bytes are fill. + * + * So, for a mode with a dotclock of 65Mhz, we would want to double the clock + * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be + * set to 130Mhz, and the SDVO multiplier set to 2x in this register and + * through an SDVO command. + * + * This register field has values of multiplication factor minus 1, with + * a maximum multiplier of 5 for SDVO. + */ +# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 +# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 +/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. + * This best be set to the default value (3) or the CRT won't work. No, + * I don't entirely understand what this does... + */ +# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f +# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 +/** @} */ + +#define DPLL_TEST 0x606c +# define DPLLB_TEST_SDVO_DIV_1 (0 << 22) +# define DPLLB_TEST_SDVO_DIV_2 (1 << 22) +# define DPLLB_TEST_SDVO_DIV_4 (2 << 22) +# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) +# define DPLLB_TEST_N_BYPASS (1 << 19) +# define DPLLB_TEST_M_BYPASS (1 << 18) +# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) +# define DPLLA_TEST_N_BYPASS (1 << 3) +# define DPLLA_TEST_M_BYPASS (1 << 2) +# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) + +#define ADPA 0x61100 +#define ADPA_DAC_ENABLE (1<<31) +#define ADPA_DAC_DISABLE 0 +#define ADPA_PIPE_SELECT_MASK (1<<30) +#define ADPA_PIPE_A_SELECT 0 +#define ADPA_PIPE_B_SELECT (1<<30) +#define ADPA_USE_VGA_HVPOLARITY (1<<15) +#define ADPA_SETS_HVPOLARITY 0 +#define ADPA_VSYNC_CNTL_DISABLE (1<<11) +#define ADPA_VSYNC_CNTL_ENABLE 0 +#define ADPA_HSYNC_CNTL_DISABLE (1<<10) +#define ADPA_HSYNC_CNTL_ENABLE 0 +#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) +#define ADPA_VSYNC_ACTIVE_LOW 0 +#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) +#define ADPA_HSYNC_ACTIVE_LOW 0 + +#define FPA0 0x06040 +#define FPA1 0x06044 +#define FPB0 0x06048 +#define FPB1 0x0604c +# define FP_N_DIV_MASK 0x003f0000 +# define FP_N_DIV_SHIFT 16 +# define FP_M1_DIV_MASK 0x00003f00 +# define FP_M1_DIV_SHIFT 8 +# define FP_M2_DIV_MASK 0x0000003f +# define FP_M2_DIV_SHIFT 0 + + +#define PORT_HOTPLUG_EN 0x61110 +# define SDVOB_HOTPLUG_INT_EN (1 << 26) +# define SDVOC_HOTPLUG_INT_EN (1 << 25) +# define TV_HOTPLUG_INT_EN (1 << 18) +# define CRT_HOTPLUG_INT_EN (1 << 9) +# define CRT_HOTPLUG_FORCE_DETECT (1 << 3) + +#define PORT_HOTPLUG_STAT 0x61114 +# define CRT_HOTPLUG_INT_STATUS (1 << 11) +# define TV_HOTPLUG_INT_STATUS (1 << 10) +# define CRT_HOTPLUG_MONITOR_MASK (3 << 8) +# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) +# define CRT_HOTPLUG_MONITOR_MONO (2 << 8) +# define CRT_HOTPLUG_MONITOR_NONE (0 << 8) +# define SDVOC_HOTPLUG_INT_STATUS (1 << 7) +# define SDVOB_HOTPLUG_INT_STATUS (1 << 6) + +#define SDVOB 0x61140 +#define SDVOC 0x61160 +#define SDVO_ENABLE (1 << 31) +#define SDVO_PIPE_B_SELECT (1 << 30) +#define SDVO_STALL_SELECT (1 << 29) +#define SDVO_INTERRUPT_ENABLE (1 << 26) +/** + * 915G/GM SDVO pixel multiplier. + * + * Programmed value is multiplier - 1, up to 5x. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +#define SDVO_PORT_MULTIPLY_MASK (7 << 23) +#define SDVO_PORT_MULTIPLY_SHIFT 23 +#define SDVO_PHASE_SELECT_MASK (15 << 19) +#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) +#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) +#define SDVOC_GANG_MODE (1 << 16) +#define SDVO_BORDER_ENABLE (1 << 7) +#define SDVOB_PCIE_CONCURRENCY (1 << 3) +#define SDVO_DETECTED (1 << 2) +/* Bits to be preserved when writing */ +#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14)) +#define SDVOC_PRESERVE_MASK (1 << 17) + +/** @defgroup LVDS + * @{ + */ +/** + * This register controls the LVDS output enable, pipe selection, and data + * format selection. + * + * All of the clock/data pairs are force powered down by power sequencing. + */ +#define LVDS 0x61180 +/** + * Enables the LVDS port. This bit must be set before DPLLs are enabled, as + * the DPLL semantics change when the LVDS is assigned to that pipe. + */ +# define LVDS_PORT_EN (1 << 31) +/** Selects pipe B for LVDS data. Must be set on pre-965. */ +# define LVDS_PIPEB_SELECT (1 << 30) + +/** + * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per + * pixel. + */ +# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) +# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) +# define LVDS_A0A2_CLKA_POWER_UP (3 << 8) +/** + * Controls the A3 data pair, which contains the additional LSBs for 24 bit + * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be + * on. + */ +# define LVDS_A3_POWER_MASK (3 << 6) +# define LVDS_A3_POWER_DOWN (0 << 6) +# define LVDS_A3_POWER_UP (3 << 6) +/** + * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP + * is set. + */ +# define LVDS_CLKB_POWER_MASK (3 << 4) +# define LVDS_CLKB_POWER_DOWN (0 << 4) +# define LVDS_CLKB_POWER_UP (3 << 4) + +/** + * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 + * setting for whether we are in dual-channel mode. The B3 pair will + * additionally only be powered up when LVDS_A3_POWER_UP is set. + */ +# define LVDS_B0B3_POWER_MASK (3 << 2) +# define LVDS_B0B3_POWER_DOWN (0 << 2) +# define LVDS_B0B3_POWER_UP (3 << 2) + +#define PIPEACONF 0x70008 +#define PIPEACONF_ENABLE (1<<31) +#define PIPEACONF_DISABLE 0 +#define PIPEACONF_DOUBLE_WIDE (1<<30) +#define I965_PIPECONF_ACTIVE (1<<30) +#define PIPEACONF_SINGLE_WIDE 0 +#define PIPEACONF_PIPE_UNLOCKED 0 +#define PIPEACONF_PIPE_LOCKED (1<<25) +#define PIPEACONF_PALETTE 0 +#define PIPEACONF_GAMMA (1<<24) +#define PIPECONF_FORCE_BORDER (1<<25) +#define PIPECONF_PROGRESSIVE (0 << 21) +#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) +#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) + +#define PIPEBCONF 0x71008 +#define PIPEBCONF_ENABLE (1<<31) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_DOUBLE_WIDE (1<<30) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_GAMMA (1<<24) +#define PIPEBCONF_PALETTE 0 + +#define PIPEBGCMAXRED 0x71010 +#define PIPEBGCMAXGREEN 0x71014 +#define PIPEBGCMAXBLUE 0x71018 +#define PIPEBSTAT 0x71024 +#define PIPEBFRAMEHIGH 0x71040 +#define PIPEBFRAMEPIXEL 0x71044 + +#define DSPACNTR 0x70180 +#define DSPBCNTR 0x71180 +#define DISPLAY_PLANE_ENABLE (1<<31) +#define DISPLAY_PLANE_DISABLE 0 +#define DISPPLANE_GAMMA_ENABLE (1<<30) +#define DISPPLANE_GAMMA_DISABLE 0 +#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) +#define DISPPLANE_8BPP (0x2<<26) +#define DISPPLANE_15_16BPP (0x4<<26) +#define DISPPLANE_16BPP (0x5<<26) +#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26) +#define DISPPLANE_32BPP (0x7<<26) +#define DISPPLANE_STEREO_ENABLE (1<<25) +#define DISPPLANE_STEREO_DISABLE 0 +#define DISPPLANE_SEL_PIPE_MASK (1<<24) +#define DISPPLANE_SEL_PIPE_A 0 +#define DISPPLANE_SEL_PIPE_B (1<<24) +#define DISPPLANE_SRC_KEY_ENABLE (1<<22) +#define DISPPLANE_SRC_KEY_DISABLE 0 +#define DISPPLANE_LINE_DOUBLE (1<<20) +#define DISPPLANE_NO_LINE_DOUBLE 0 +#define DISPPLANE_STEREO_POLARITY_FIRST 0 +#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) +/* plane B only */ +#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) +#define DISPPLANE_ALPHA_TRANS_DISABLE 0 +#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 +#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) + +#define DSPABASE 0x70184 +#define DSPASTRIDE 0x70188 + +#define DSPBBASE 0x71184 +#define DSPBADDR DSPBBASE +#define DSPBSTRIDE 0x71188 + +#define DSPAKEYVAL 0x70194 +#define DSPAKEYMASK 0x70198 + +#define DSPAPOS 0x7018C /* reserved */ +#define DSPASIZE 0x70190 +#define DSPBPOS 0x7118C +#define DSPBSIZE 0x71190 + +#define DSPASURF 0x7019C +#define DSPATILEOFF 0x701A4 + +#define DSPBSURF 0x7119C +#define DSPBTILEOFF 0x711A4 + +#define VGACNTRL 0x71400 +# define VGA_DISP_DISABLE (1 << 31) +# define VGA_2X_MODE (1 << 30) +# define VGA_PIPE_B_SELECT (1 << 29) + +/* + * Some BIOS scratch area registers. The 845 (and 830?) store the amount + * of video memory available to the BIOS in SWF1. + */ + +#define SWF0 0x71410 + +/* + * 855 scratch registers. + */ +#define SWF10 0x70410 + +#define SWF30 0x72414 + +/* + * Overlay registers. These are overlay registers accessed via MMIO. + * Those loaded via the overlay register page are defined in i830_video.c. + */ +#define OVADD 0x30000 + +#define DOVSTA 0x30008 +#define OC_BUF (0x3<<20) + +#define OGAMC5 0x30010 +#define OGAMC4 0x30014 +#define OGAMC3 0x30018 +#define OGAMC2 0x3001c +#define OGAMC1 0x30020 +#define OGAMC0 0x30024 +/* + * Palette registers + */ +#define PALETTE_A 0x0a000 +#define PALETTE_B 0x0a800 + +#define IS_I830(dev) ((dev)->pci_device == 0x3577) +#define IS_845G(dev) ((dev)->pci_device == 0x2562) +#define IS_I85X(dev) ((dev)->pci_device == 0x3582) +#define IS_I855(dev) ((dev)->pci_device == 0x3582) +#define IS_I865G(dev) ((dev)->pci_device == 0x2572) + +#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a) +#define IS_I915GM(dev) ((dev)->pci_device == 0x2592) +#define IS_I945G(dev) ((dev)->pci_device == 0x2772) +#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2) + +#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \ + (dev)->pci_device == 0x2982 || \ + (dev)->pci_device == 0x2992 || \ + (dev)->pci_device == 0x29A2 || \ + (dev)->pci_device == 0x2A02 || \ + (dev)->pci_device == 0x2A12 || \ + (dev)->pci_device == 0x2A42) + +#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) + +#define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42) + +#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \ + (dev)->pci_device == 0x29B2 || \ + (dev)->pci_device == 0x29D2) + +#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \ + IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev)) + +#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ + IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev)) + +#define PRIMARY_RINGBUFFER_SIZE (128*1024) #endif diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c index a443f4a202e..92653b38e64 100644 --- a/drivers/char/drm/i915_irq.c +++ b/drivers/char/drm/i915_irq.c @@ -276,7 +276,7 @@ static int i915_emit_irq(struct drm_device * dev) i915_kernel_lost_context(dev); - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); dev_priv->sarea_priv->last_enqueue = ++dev_priv->counter; @@ -291,7 +291,7 @@ static int i915_emit_irq(struct drm_device * dev) OUT_RING(0); OUT_RING(GFX_OP_USER_INTERRUPT); ADVANCE_LP_RING(); - + return dev_priv->counter; } @@ -300,7 +300,7 @@ static int i915_wait_irq(struct drm_device * dev, int irq_nr) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int ret = 0; - DRM_DEBUG("%s irq_nr=%d breadcrumb=%d\n", __FUNCTION__, irq_nr, + DRM_DEBUG("irq_nr=%d breadcrumb=%d\n", irq_nr, READ_BREADCRUMB(dev_priv)); if (READ_BREADCRUMB(dev_priv) >= irq_nr) @@ -312,8 +312,7 @@ static int i915_wait_irq(struct drm_device * dev, int irq_nr) READ_BREADCRUMB(dev_priv) >= irq_nr); if (ret == -EBUSY) { - DRM_ERROR("%s: EBUSY -- rec: %d emitted: %d\n", - __FUNCTION__, + DRM_ERROR("EBUSY -- rec: %d emitted: %d\n", READ_BREADCRUMB(dev_priv), (int)dev_priv->counter); } @@ -329,14 +328,14 @@ static int i915_driver_vblank_do_wait(struct drm_device *dev, unsigned int *sequ int ret = 0; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ, (((cur_vblank = atomic_read(counter)) - *sequence) <= (1<<23))); - + *sequence = cur_vblank; return ret; @@ -365,7 +364,7 @@ int i915_irq_emit(struct drm_device *dev, void *data, LOCK_TEST_WITH_RETURN(dev, file_priv); if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -388,7 +387,7 @@ int i915_irq_wait(struct drm_device *dev, void *data, drm_i915_irq_wait_t *irqwait = data; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -418,13 +417,12 @@ int i915_vblank_pipe_set(struct drm_device *dev, void *data, drm_i915_vblank_pipe_t *pipe = data; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } if (pipe->pipe & ~(DRM_I915_VBLANK_PIPE_A|DRM_I915_VBLANK_PIPE_B)) { - DRM_ERROR("%s called with invalid pipe 0x%x\n", - __FUNCTION__, pipe->pipe); + DRM_ERROR("called with invalid pipe 0x%x\n", pipe->pipe); return -EINVAL; } @@ -443,7 +441,7 @@ int i915_vblank_pipe_get(struct drm_device *dev, void *data, u16 flag; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -555,7 +553,7 @@ int i915_vblank_swap(struct drm_device *dev, void *data, spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); - list_add_tail((struct list_head *)vbl_swap, &dev_priv->vbl_swaps.head); + list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head); dev_priv->swaps_pending++; spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); diff --git a/drivers/char/drm/i915_mem.c b/drivers/char/drm/i915_mem.c index 56fb9b30a5d..6126a60dc9c 100644 --- a/drivers/char/drm/i915_mem.c +++ b/drivers/char/drm/i915_mem.c @@ -276,7 +276,7 @@ int i915_mem_alloc(struct drm_device *dev, void *data, struct mem_block *block, **heap; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -314,7 +314,7 @@ int i915_mem_free(struct drm_device *dev, void *data, struct mem_block *block, **heap; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -342,7 +342,7 @@ int i915_mem_init_heap(struct drm_device *dev, void *data, struct mem_block **heap; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -366,7 +366,7 @@ int i915_mem_destroy_heap( struct drm_device *dev, void *data, struct mem_block **heap; if ( !dev_priv ) { - DRM_ERROR( "%s called with no initialization\n", __FUNCTION__ ); + DRM_ERROR( "called with no initialization\n" ); return -EINVAL; } @@ -375,7 +375,7 @@ int i915_mem_destroy_heap( struct drm_device *dev, void *data, DRM_ERROR("get_heap failed"); return -EFAULT; } - + if (!*heap) { DRM_ERROR("heap not initialized?"); return -EFAULT; @@ -384,4 +384,3 @@ int i915_mem_destroy_heap( struct drm_device *dev, void *data, i915_mem_takedown( heap ); return 0; } - diff --git a/drivers/char/drm/mga_dma.c b/drivers/char/drm/mga_dma.c index c567c34cda7..c1d12dbfa8d 100644 --- a/drivers/char/drm/mga_dma.c +++ b/drivers/char/drm/mga_dma.c @@ -493,7 +493,7 @@ static int mga_do_agp_dma_bootstrap(struct drm_device * dev, dma_bs->agp_size); return err; } - + dev_priv->agp_size = agp_size; dev_priv->agp_handle = agp_req.handle; @@ -550,7 +550,7 @@ static int mga_do_agp_dma_bootstrap(struct drm_device * dev, { struct drm_map_list *_entry; unsigned long agp_token = 0; - + list_for_each_entry(_entry, &dev->maplist, head) { if (_entry->map == dev->agp_buffer_map) agp_token = _entry->user_token; @@ -964,7 +964,7 @@ static int mga_do_cleanup_dma(struct drm_device *dev, int full_cleanup) free_req.handle = dev_priv->agp_handle; drm_agp_free(dev, &free_req); - + dev_priv->agp_textures = NULL; dev_priv->agp_size = 0; dev_priv->agp_handle = 0; @@ -998,7 +998,7 @@ static int mga_do_cleanup_dma(struct drm_device *dev, int full_cleanup) } } - return 0; + return err; } int mga_dma_init(struct drm_device *dev, void *data, @@ -1050,7 +1050,7 @@ int mga_dma_flush(struct drm_device *dev, void *data, #if MGA_DMA_DEBUG int ret = mga_do_wait_for_idle(dev_priv); if (ret < 0) - DRM_INFO("%s: -EBUSY\n", __FUNCTION__); + DRM_INFO("-EBUSY\n"); return ret; #else return mga_do_wait_for_idle(dev_priv); diff --git a/drivers/char/drm/mga_drv.h b/drivers/char/drm/mga_drv.h index cd94c04e31c..f6ebd24bd58 100644 --- a/drivers/char/drm/mga_drv.h +++ b/drivers/char/drm/mga_drv.h @@ -216,8 +216,8 @@ static inline u32 _MGA_READ(u32 * addr) #define MGA_WRITE( reg, val ) DRM_WRITE32(dev_priv->mmio, (reg), (val)) #endif -#define DWGREG0 0x1c00 -#define DWGREG0_END 0x1dff +#define DWGREG0 0x1c00 +#define DWGREG0_END 0x1dff #define DWGREG1 0x2c00 #define DWGREG1_END 0x2dff @@ -249,7 +249,7 @@ do { \ } else if ( dev_priv->prim.space < \ dev_priv->prim.high_mark ) { \ if ( MGA_DMA_DEBUG ) \ - DRM_INFO( "%s: wrap...\n", __FUNCTION__ ); \ + DRM_INFO( "wrap...\n"); \ return -EBUSY; \ } \ } \ @@ -260,7 +260,7 @@ do { \ if ( test_bit( 0, &dev_priv->prim.wrapped ) ) { \ if ( mga_do_wait_for_idle( dev_priv ) < 0 ) { \ if ( MGA_DMA_DEBUG ) \ - DRM_INFO( "%s: wrap...\n", __FUNCTION__ ); \ + DRM_INFO( "wrap...\n"); \ return -EBUSY; \ } \ mga_do_dma_wrap_end( dev_priv ); \ @@ -280,8 +280,7 @@ do { \ #define BEGIN_DMA( n ) \ do { \ if ( MGA_VERBOSE ) { \ - DRM_INFO( "BEGIN_DMA( %d ) in %s\n", \ - (n), __FUNCTION__ ); \ + DRM_INFO( "BEGIN_DMA( %d )\n", (n) ); \ DRM_INFO( " space=0x%x req=0x%Zx\n", \ dev_priv->prim.space, (n) * DMA_BLOCK_SIZE ); \ } \ @@ -292,7 +291,7 @@ do { \ #define BEGIN_DMA_WRAP() \ do { \ if ( MGA_VERBOSE ) { \ - DRM_INFO( "BEGIN_DMA() in %s\n", __FUNCTION__ ); \ + DRM_INFO( "BEGIN_DMA()\n" ); \ DRM_INFO( " space=0x%x\n", dev_priv->prim.space ); \ } \ prim = dev_priv->prim.start; \ @@ -311,7 +310,7 @@ do { \ #define FLUSH_DMA() \ do { \ if ( 0 ) { \ - DRM_INFO( "%s:\n", __FUNCTION__ ); \ + DRM_INFO( "\n" ); \ DRM_INFO( " tail=0x%06x head=0x%06lx\n", \ dev_priv->prim.tail, \ MGA_READ( MGA_PRIMADDRESS ) - \ @@ -394,22 +393,22 @@ do { \ #define MGA_VINTCLR (1 << 4) #define MGA_VINTEN (1 << 5) -#define MGA_ALPHACTRL 0x2c7c -#define MGA_AR0 0x1c60 -#define MGA_AR1 0x1c64 -#define MGA_AR2 0x1c68 -#define MGA_AR3 0x1c6c -#define MGA_AR4 0x1c70 -#define MGA_AR5 0x1c74 -#define MGA_AR6 0x1c78 +#define MGA_ALPHACTRL 0x2c7c +#define MGA_AR0 0x1c60 +#define MGA_AR1 0x1c64 +#define MGA_AR2 0x1c68 +#define MGA_AR3 0x1c6c +#define MGA_AR4 0x1c70 +#define MGA_AR5 0x1c74 +#define MGA_AR6 0x1c78 #define MGA_CXBNDRY 0x1c80 -#define MGA_CXLEFT 0x1ca0 +#define MGA_CXLEFT 0x1ca0 #define MGA_CXRIGHT 0x1ca4 -#define MGA_DMAPAD 0x1c54 -#define MGA_DSTORG 0x2cb8 -#define MGA_DWGCTL 0x1c00 +#define MGA_DMAPAD 0x1c54 +#define MGA_DSTORG 0x2cb8 +#define MGA_DWGCTL 0x1c00 # define MGA_OPCOD_MASK (15 << 0) # define MGA_OPCOD_TRAP (4 << 0) # define MGA_OPCOD_TEXTURE_TRAP (6 << 0) @@ -455,27 +454,27 @@ do { \ # define MGA_CLIPDIS (1 << 31) #define MGA_DWGSYNC 0x2c4c -#define MGA_FCOL 0x1c24 -#define MGA_FIFOSTATUS 0x1e10 -#define MGA_FOGCOL 0x1cf4 +#define MGA_FCOL 0x1c24 +#define MGA_FIFOSTATUS 0x1e10 +#define MGA_FOGCOL 0x1cf4 #define MGA_FXBNDRY 0x1c84 -#define MGA_FXLEFT 0x1ca8 +#define MGA_FXLEFT 0x1ca8 #define MGA_FXRIGHT 0x1cac -#define MGA_ICLEAR 0x1e18 +#define MGA_ICLEAR 0x1e18 # define MGA_SOFTRAPICLR (1 << 0) # define MGA_VLINEICLR (1 << 5) -#define MGA_IEN 0x1e1c +#define MGA_IEN 0x1e1c # define MGA_SOFTRAPIEN (1 << 0) # define MGA_VLINEIEN (1 << 5) -#define MGA_LEN 0x1c5c +#define MGA_LEN 0x1c5c #define MGA_MACCESS 0x1c04 -#define MGA_PITCH 0x1c8c -#define MGA_PLNWT 0x1c1c -#define MGA_PRIMADDRESS 0x1e58 +#define MGA_PITCH 0x1c8c +#define MGA_PLNWT 0x1c1c +#define MGA_PRIMADDRESS 0x1e58 # define MGA_DMA_GENERAL (0 << 0) # define MGA_DMA_BLIT (1 << 0) # define MGA_DMA_VECTOR (2 << 0) @@ -487,43 +486,43 @@ do { \ # define MGA_PRIMPTREN0 (1 << 0) # define MGA_PRIMPTREN1 (1 << 1) -#define MGA_RST 0x1e40 +#define MGA_RST 0x1e40 # define MGA_SOFTRESET (1 << 0) # define MGA_SOFTEXTRST (1 << 1) -#define MGA_SECADDRESS 0x2c40 -#define MGA_SECEND 0x2c44 -#define MGA_SETUPADDRESS 0x2cd0 -#define MGA_SETUPEND 0x2cd4 +#define MGA_SECADDRESS 0x2c40 +#define MGA_SECEND 0x2c44 +#define MGA_SETUPADDRESS 0x2cd0 +#define MGA_SETUPEND 0x2cd4 #define MGA_SGN 0x1c58 #define MGA_SOFTRAP 0x2c48 -#define MGA_SRCORG 0x2cb4 +#define MGA_SRCORG 0x2cb4 # define MGA_SRMMAP_MASK (1 << 0) # define MGA_SRCMAP_FB (0 << 0) # define MGA_SRCMAP_SYSMEM (1 << 0) # define MGA_SRCACC_MASK (1 << 1) # define MGA_SRCACC_PCI (0 << 1) # define MGA_SRCACC_AGP (1 << 1) -#define MGA_STATUS 0x1e14 +#define MGA_STATUS 0x1e14 # define MGA_SOFTRAPEN (1 << 0) # define MGA_VSYNCPEN (1 << 4) # define MGA_VLINEPEN (1 << 5) # define MGA_DWGENGSTS (1 << 16) # define MGA_ENDPRDMASTS (1 << 17) #define MGA_STENCIL 0x2cc8 -#define MGA_STENCILCTL 0x2ccc +#define MGA_STENCILCTL 0x2ccc -#define MGA_TDUALSTAGE0 0x2cf8 -#define MGA_TDUALSTAGE1 0x2cfc -#define MGA_TEXBORDERCOL 0x2c5c -#define MGA_TEXCTL 0x2c30 +#define MGA_TDUALSTAGE0 0x2cf8 +#define MGA_TDUALSTAGE1 0x2cfc +#define MGA_TEXBORDERCOL 0x2c5c +#define MGA_TEXCTL 0x2c30 #define MGA_TEXCTL2 0x2c3c # define MGA_DUALTEX (1 << 7) # define MGA_G400_TC2_MAGIC (1 << 15) # define MGA_MAP1_ENABLE (1 << 31) -#define MGA_TEXFILTER 0x2c58 -#define MGA_TEXHEIGHT 0x2c2c -#define MGA_TEXORG 0x2c24 +#define MGA_TEXFILTER 0x2c58 +#define MGA_TEXHEIGHT 0x2c2c +#define MGA_TEXORG 0x2c24 # define MGA_TEXORGMAP_MASK (1 << 0) # define MGA_TEXORGMAP_FB (0 << 0) # define MGA_TEXORGMAP_SYSMEM (1 << 0) @@ -534,45 +533,45 @@ do { \ #define MGA_TEXORG2 0x2ca8 #define MGA_TEXORG3 0x2cac #define MGA_TEXORG4 0x2cb0 -#define MGA_TEXTRANS 0x2c34 -#define MGA_TEXTRANSHIGH 0x2c38 -#define MGA_TEXWIDTH 0x2c28 - -#define MGA_WACCEPTSEQ 0x1dd4 -#define MGA_WCODEADDR 0x1e6c -#define MGA_WFLAG 0x1dc4 -#define MGA_WFLAG1 0x1de0 +#define MGA_TEXTRANS 0x2c34 +#define MGA_TEXTRANSHIGH 0x2c38 +#define MGA_TEXWIDTH 0x2c28 + +#define MGA_WACCEPTSEQ 0x1dd4 +#define MGA_WCODEADDR 0x1e6c +#define MGA_WFLAG 0x1dc4 +#define MGA_WFLAG1 0x1de0 #define MGA_WFLAGNB 0x1e64 -#define MGA_WFLAGNB1 0x1e08 +#define MGA_WFLAGNB1 0x1e08 #define MGA_WGETMSB 0x1dc8 -#define MGA_WIADDR 0x1dc0 +#define MGA_WIADDR 0x1dc0 #define MGA_WIADDR2 0x1dd8 # define MGA_WMODE_SUSPEND (0 << 0) # define MGA_WMODE_RESUME (1 << 0) # define MGA_WMODE_JUMP (2 << 0) # define MGA_WMODE_START (3 << 0) # define MGA_WAGP_ENABLE (1 << 2) -#define MGA_WMISC 0x1e70 +#define MGA_WMISC 0x1e70 # define MGA_WUCODECACHE_ENABLE (1 << 0) # define MGA_WMASTER_ENABLE (1 << 1) # define MGA_WCACHEFLUSH_ENABLE (1 << 3) #define MGA_WVRTXSZ 0x1dcc -#define MGA_YBOT 0x1c9c -#define MGA_YDST 0x1c90 +#define MGA_YBOT 0x1c9c +#define MGA_YDST 0x1c90 #define MGA_YDSTLEN 0x1c88 #define MGA_YDSTORG 0x1c94 -#define MGA_YTOP 0x1c98 +#define MGA_YTOP 0x1c98 -#define MGA_ZORG 0x1c0c +#define MGA_ZORG 0x1c0c /* This finishes the current batch of commands */ -#define MGA_EXEC 0x0100 +#define MGA_EXEC 0x0100 /* AGP PLL encoding (for G200 only). */ -#define MGA_AGP_PLL 0x1e4c +#define MGA_AGP_PLL 0x1e4c # define MGA_AGP2XPLL_DISABLE (0 << 0) # define MGA_AGP2XPLL_ENABLE (1 << 0) diff --git a/drivers/char/drm/mga_state.c b/drivers/char/drm/mga_state.c index 5ec8b61c5d4..d3f8aade07b 100644 --- a/drivers/char/drm/mga_state.c +++ b/drivers/char/drm/mga_state.c @@ -150,8 +150,8 @@ static __inline__ void mga_g400_emit_tex0(drm_mga_private_t * dev_priv) drm_mga_texture_regs_t *tex = &sarea_priv->tex_state[0]; DMA_LOCALS; -/* printk("mga_g400_emit_tex0 %x %x %x\n", tex->texorg, */ -/* tex->texctl, tex->texctl2); */ +/* printk("mga_g400_emit_tex0 %x %x %x\n", tex->texorg, */ +/* tex->texctl, tex->texctl2); */ BEGIN_DMA(6); @@ -190,8 +190,8 @@ static __inline__ void mga_g400_emit_tex1(drm_mga_private_t * dev_priv) drm_mga_texture_regs_t *tex = &sarea_priv->tex_state[1]; DMA_LOCALS; -/* printk("mga_g400_emit_tex1 %x %x %x\n", tex->texorg, */ -/* tex->texctl, tex->texctl2); */ +/* printk("mga_g400_emit_tex1 %x %x %x\n", tex->texorg, */ +/* tex->texctl, tex->texctl2); */ BEGIN_DMA(5); @@ -256,7 +256,7 @@ static __inline__ void mga_g400_emit_pipe(drm_mga_private_t * dev_priv) unsigned int pipe = sarea_priv->warp_pipe; DMA_LOCALS; -/* printk("mga_g400_emit_pipe %x\n", pipe); */ +/* printk("mga_g400_emit_pipe %x\n", pipe); */ BEGIN_DMA(10); @@ -619,7 +619,7 @@ static void mga_dma_dispatch_swap(struct drm_device * dev) FLUSH_DMA(); - DRM_DEBUG("%s... done.\n", __FUNCTION__); + DRM_DEBUG("... done.\n"); } static void mga_dma_dispatch_vertex(struct drm_device * dev, struct drm_buf * buf) @@ -631,7 +631,7 @@ static void mga_dma_dispatch_vertex(struct drm_device * dev, struct drm_buf * bu u32 length = (u32) buf->used; int i = 0; DMA_LOCALS; - DRM_DEBUG("vertex: buf=%d used=%d\n", buf->idx, buf->used); + DRM_DEBUG("buf=%d used=%d\n", buf->idx, buf->used); if (buf->used) { buf_priv->dispatched = 1; @@ -678,7 +678,7 @@ static void mga_dma_dispatch_indices(struct drm_device * dev, struct drm_buf * b u32 address = (u32) buf->bus_address; int i = 0; DMA_LOCALS; - DRM_DEBUG("indices: buf=%d start=%d end=%d\n", buf->idx, start, end); + DRM_DEBUG("buf=%d start=%d end=%d\n", buf->idx, start, end); if (start != end) { buf_priv->dispatched = 1; @@ -955,7 +955,7 @@ static int mga_dma_iload(struct drm_device *dev, void *data, struct drm_file *fi #if 0 if (mga_do_wait_for_idle(dev_priv) < 0) { if (MGA_DMA_DEBUG) - DRM_INFO("%s: -EBUSY\n", __FUNCTION__); + DRM_INFO("-EBUSY\n"); return -EBUSY; } #endif @@ -1014,7 +1014,7 @@ static int mga_getparam(struct drm_device *dev, void *data, struct drm_file *fil int value; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -1046,7 +1046,7 @@ static int mga_set_fence(struct drm_device *dev, void *data, struct drm_file *fi DMA_LOCALS; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -1075,7 +1075,7 @@ file_priv) u32 *fence = data; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } diff --git a/drivers/char/drm/r128_cce.c b/drivers/char/drm/r128_cce.c index 7d550aba165..892e0a58984 100644 --- a/drivers/char/drm/r128_cce.c +++ b/drivers/char/drm/r128_cce.c @@ -1,4 +1,4 @@ -/* r128_cce.c -- ATI Rage 128 driver -*- linux-c -*- +/* r128_cce.c -- ATI Rage 128 driver -*- linux-c -*- * Created: Wed Apr 5 19:24:19 2000 by kevin@precisioninsight.com */ /* @@ -651,7 +651,7 @@ int r128_cce_start(struct drm_device *dev, void *data, struct drm_file *file_pri LOCK_TEST_WITH_RETURN(dev, file_priv); if (dev_priv->cce_running || dev_priv->cce_mode == R128_PM4_NONPM4) { - DRM_DEBUG("%s while CCE running\n", __FUNCTION__); + DRM_DEBUG("while CCE running\n"); return 0; } @@ -710,7 +710,7 @@ int r128_cce_reset(struct drm_device *dev, void *data, struct drm_file *file_pri LOCK_TEST_WITH_RETURN(dev, file_priv); if (!dev_priv) { - DRM_DEBUG("%s called before init done\n", __FUNCTION__); + DRM_DEBUG("called before init done\n"); return -EINVAL; } diff --git a/drivers/char/drm/r128_drv.h b/drivers/char/drm/r128_drv.h index 5041bd8dbed..011105e51ac 100644 --- a/drivers/char/drm/r128_drv.h +++ b/drivers/char/drm/r128_drv.h @@ -462,8 +462,7 @@ do { \ #define BEGIN_RING( n ) do { \ if ( R128_VERBOSE ) { \ - DRM_INFO( "BEGIN_RING( %d ) in %s\n", \ - (n), __FUNCTION__ ); \ + DRM_INFO( "BEGIN_RING( %d )\n", (n)); \ } \ if ( dev_priv->ring.space <= (n) * sizeof(u32) ) { \ COMMIT_RING(); \ @@ -493,7 +492,7 @@ do { \ write * sizeof(u32) ); \ } \ if (((dev_priv->ring.tail + _nr) & tail_mask) != write) { \ - DRM_ERROR( \ + DRM_ERROR( \ "ADVANCE_RING(): mismatch: nr: %x write: %x line: %d\n", \ ((dev_priv->ring.tail + _nr) & tail_mask), \ write, __LINE__); \ diff --git a/drivers/char/drm/r128_state.c b/drivers/char/drm/r128_state.c index b7f483cac6d..51a9afce7b9 100644 --- a/drivers/char/drm/r128_state.c +++ b/drivers/char/drm/r128_state.c @@ -42,7 +42,7 @@ static void r128_emit_clip_rects(drm_r128_private_t * dev_priv, { u32 aux_sc_cntl = 0x00000000; RING_LOCALS; - DRM_DEBUG(" %s\n", __FUNCTION__); + DRM_DEBUG("\n"); BEGIN_RING((count < 3 ? count : 3) * 5 + 2); @@ -85,7 +85,7 @@ static __inline__ void r128_emit_core(drm_r128_private_t * dev_priv) drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv; drm_r128_context_regs_t *ctx = &sarea_priv->context_state; RING_LOCALS; - DRM_DEBUG(" %s\n", __FUNCTION__); + DRM_DEBUG("\n"); BEGIN_RING(2); @@ -100,7 +100,7 @@ static __inline__ void r128_emit_context(drm_r128_private_t * dev_priv) drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv; drm_r128_context_regs_t *ctx = &sarea_priv->context_state; RING_LOCALS; - DRM_DEBUG(" %s\n", __FUNCTION__); + DRM_DEBUG("\n"); BEGIN_RING(13); @@ -126,7 +126,7 @@ static __inline__ void r128_emit_setup(drm_r128_private_t * dev_priv) drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv; drm_r128_context_regs_t *ctx = &sarea_priv->context_state; RING_LOCALS; - DRM_DEBUG(" %s\n", __FUNCTION__); + DRM_DEBUG("\n"); BEGIN_RING(3); @@ -142,7 +142,7 @@ static __inline__ void r128_emit_masks(drm_r128_private_t * dev_priv) drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv; drm_r128_context_regs_t *ctx = &sarea_priv->context_state; RING_LOCALS; - DRM_DEBUG(" %s\n", __FUNCTION__); + DRM_DEBUG("\n"); BEGIN_RING(5); @@ -161,7 +161,7 @@ static __inline__ void r128_emit_window(drm_r128_private_t * dev_priv) drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv; drm_r128_context_regs_t *ctx = &sarea_priv->context_state; RING_LOCALS; - DRM_DEBUG(" %s\n", __FUNCTION__); + DRM_DEBUG("\n"); BEGIN_RING(2); @@ -178,7 +178,7 @@ static __inline__ void r128_emit_tex0(drm_r128_private_t * dev_priv) drm_r128_texture_regs_t *tex = &sarea_priv->tex_state[0]; int i; RING_LOCALS; - DRM_DEBUG(" %s\n", __FUNCTION__); + DRM_DEBUG("\n"); BEGIN_RING(7 + R128_MAX_TEXTURE_LEVELS); @@ -204,7 +204,7 @@ static __inline__ void r128_emit_tex1(drm_r128_private_t * dev_priv) drm_r128_texture_regs_t *tex = &sarea_priv->tex_state[1]; int i; RING_LOCALS; - DRM_DEBUG(" %s\n", __FUNCTION__); + DRM_DEBUG("\n"); BEGIN_RING(5 + R128_MAX_TEXTURE_LEVELS); @@ -226,7 +226,7 @@ static void r128_emit_state(drm_r128_private_t * dev_priv) drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv; unsigned int dirty = sarea_priv->dirty; - DRM_DEBUG("%s: dirty=0x%08x\n", __FUNCTION__, dirty); + DRM_DEBUG("dirty=0x%08x\n", dirty); if (dirty & R128_UPLOAD_CORE) { r128_emit_core(dev_priv); @@ -362,7 +362,7 @@ static void r128_cce_dispatch_clear(struct drm_device * dev, unsigned int flags = clear->flags; int i; RING_LOCALS; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); if (dev_priv->page_flipping && dev_priv->current_page == 1) { unsigned int tmp = flags; @@ -466,7 +466,7 @@ static void r128_cce_dispatch_swap(struct drm_device * dev) struct drm_clip_rect *pbox = sarea_priv->boxes; int i; RING_LOCALS; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); #if R128_PERFORMANCE_BOXES /* Do some trivial performance monitoring... @@ -528,8 +528,7 @@ static void r128_cce_dispatch_flip(struct drm_device * dev) { drm_r128_private_t *dev_priv = dev->dev_private; RING_LOCALS; - DRM_DEBUG("%s: page=%d pfCurrentPage=%d\n", - __FUNCTION__, + DRM_DEBUG("page=%d pfCurrentPage=%d\n", dev_priv->current_page, dev_priv->sarea_priv->pfCurrentPage); #if R128_PERFORMANCE_BOXES @@ -1156,7 +1155,7 @@ static int r128_cce_dispatch_read_pixels(struct drm_device * dev, int count, *x, *y; int i, xbuf_size, ybuf_size; RING_LOCALS; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); count = depth->n; if (count > 4096 || count <= 0) @@ -1226,7 +1225,7 @@ static void r128_cce_dispatch_stipple(struct drm_device * dev, u32 * stipple) drm_r128_private_t *dev_priv = dev->dev_private; int i; RING_LOCALS; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); BEGIN_RING(33); @@ -1309,7 +1308,7 @@ static int r128_do_cleanup_pageflip(struct drm_device * dev) static int r128_cce_flip(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_r128_private_t *dev_priv = dev->dev_private; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); LOCK_TEST_WITH_RETURN(dev, file_priv); @@ -1328,7 +1327,7 @@ static int r128_cce_swap(struct drm_device *dev, void *data, struct drm_file *fi { drm_r128_private_t *dev_priv = dev->dev_private; drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); LOCK_TEST_WITH_RETURN(dev, file_priv); @@ -1356,7 +1355,7 @@ static int r128_cce_vertex(struct drm_device *dev, void *data, struct drm_file * LOCK_TEST_WITH_RETURN(dev, file_priv); if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -1412,7 +1411,7 @@ static int r128_cce_indices(struct drm_device *dev, void *data, struct drm_file LOCK_TEST_WITH_RETURN(dev, file_priv); if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -1557,11 +1556,11 @@ static int r128_cce_indirect(struct drm_device *dev, void *data, struct drm_file LOCK_TEST_WITH_RETURN(dev, file_priv); if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } - DRM_DEBUG("indirect: idx=%d s=%d e=%d d=%d\n", + DRM_DEBUG("idx=%d s=%d e=%d d=%d\n", indirect->idx, indirect->start, indirect->end, indirect->discard); @@ -1622,7 +1621,7 @@ static int r128_getparam(struct drm_device *dev, void *data, struct drm_file *fi int value; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c index 59b2944811c..0f4afc44245 100644 --- a/drivers/char/drm/r300_cmdbuf.c +++ b/drivers/char/drm/r300_cmdbuf.c @@ -77,23 +77,31 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv, return -EFAULT; } - box.x1 = - (box.x1 + - R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; - box.y1 = - (box.y1 + - R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; - box.x2 = - (box.x2 + - R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; - box.y2 = - (box.y2 + - R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) { + box.x1 = (box.x1) & + R300_CLIPRECT_MASK; + box.y1 = (box.y1) & + R300_CLIPRECT_MASK; + box.x2 = (box.x2) & + R300_CLIPRECT_MASK; + box.y2 = (box.y2) & + R300_CLIPRECT_MASK; + } else { + box.x1 = (box.x1 + R300_CLIPRECT_OFFSET) & + R300_CLIPRECT_MASK; + box.y1 = (box.y1 + R300_CLIPRECT_OFFSET) & + R300_CLIPRECT_MASK; + box.x2 = (box.x2 + R300_CLIPRECT_OFFSET) & + R300_CLIPRECT_MASK; + box.y2 = (box.y2 + R300_CLIPRECT_OFFSET) & + R300_CLIPRECT_MASK; + } OUT_RING((box.x1 << R300_CLIPRECT_X_SHIFT) | (box.y1 << R300_CLIPRECT_Y_SHIFT)); OUT_RING((box.x2 << R300_CLIPRECT_X_SHIFT) | (box.y2 << R300_CLIPRECT_Y_SHIFT)); + } OUT_RING_REG(R300_RE_CLIPRECT_CNTL, r300_cliprect_cntl[nr - 1]); @@ -133,9 +141,11 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv, static u8 r300_reg_flags[0x10000 >> 2]; -void r300_init_reg_flags(void) +void r300_init_reg_flags(struct drm_device *dev) { int i; + drm_radeon_private_t *dev_priv = dev->dev_private; + memset(r300_reg_flags, 0, 0x10000 >> 2); #define ADD_RANGE_MARK(reg, count,mark) \ for(i=((reg)>>2);i<((reg)>>2)+(count);i++)\ @@ -230,6 +240,9 @@ void r300_init_reg_flags(void) ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8); ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8); + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) { + ADD_RANGE(0x4074, 16); + } } static __inline__ int r300_check_range(unsigned reg, int count) @@ -486,7 +499,7 @@ static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv, if (cmd[0] & 0x8000) { u32 offset; - if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL + if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL | RADEON_GMC_DST_PITCH_OFFSET_CNTL)) { offset = cmd[2] << 10; ret = !radeon_check_offset(dev_priv, offset); @@ -504,7 +517,7 @@ static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv, DRM_ERROR("Invalid bitblt second offset is %08X\n", offset); return -EINVAL; } - + } } @@ -723,54 +736,54 @@ static int r300_scratch(drm_radeon_private_t *dev_priv, u32 *ref_age_base; u32 i, buf_idx, h_pending; RING_LOCALS; - - if (cmdbuf->bufsz < + + if (cmdbuf->bufsz < (sizeof(u64) + header.scratch.n_bufs * sizeof(buf_idx))) { return -EINVAL; } - + if (header.scratch.reg >= 5) { return -EINVAL; } - + dev_priv->scratch_ages[header.scratch.reg]++; - + ref_age_base = (u32 *)(unsigned long)*((uint64_t *)cmdbuf->buf); - + cmdbuf->buf += sizeof(u64); cmdbuf->bufsz -= sizeof(u64); - + for (i=0; i < header.scratch.n_bufs; i++) { buf_idx = *(u32 *)cmdbuf->buf; buf_idx *= 2; /* 8 bytes per buf */ - + if (DRM_COPY_TO_USER(ref_age_base + buf_idx, &dev_priv->scratch_ages[header.scratch.reg], sizeof(u32))) { return -EINVAL; } - + if (DRM_COPY_FROM_USER(&h_pending, ref_age_base + buf_idx + 1, sizeof(u32))) { return -EINVAL; } - + if (h_pending == 0) { return -EINVAL; } - + h_pending--; - + if (DRM_COPY_TO_USER(ref_age_base + buf_idx + 1, &h_pending, sizeof(u32))) { return -EINVAL; } - + cmdbuf->buf += sizeof(buf_idx); cmdbuf->bufsz -= sizeof(buf_idx); } - + BEGIN_RING(2); OUT_RING( CP_PACKET0( RADEON_SCRATCH_REG0 + header.scratch.reg * 4, 0 ) ); OUT_RING( dev_priv->scratch_ages[header.scratch.reg] ); ADVANCE_RING(); - + return 0; } @@ -919,7 +932,7 @@ int r300_do_cp_cmdbuf(struct drm_device *dev, goto cleanup; } break; - + default: DRM_ERROR("bad cmd_type %i at %p\n", header.header.cmd_type, diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index fa194a46c1e..8f664af9c4a 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -853,13 +853,13 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_TX_FORMAT_W8Z8Y8X8 0xC # define R300_TX_FORMAT_W2Z10Y10X10 0xD # define R300_TX_FORMAT_W16Z16Y16X16 0xE -# define R300_TX_FORMAT_DXT1 0xF -# define R300_TX_FORMAT_DXT3 0x10 -# define R300_TX_FORMAT_DXT5 0x11 +# define R300_TX_FORMAT_DXT1 0xF +# define R300_TX_FORMAT_DXT3 0x10 +# define R300_TX_FORMAT_DXT5 0x11 # define R300_TX_FORMAT_D3DMFT_CxV8U8 0x12 /* no swizzle */ -# define R300_TX_FORMAT_A8R8G8B8 0x13 /* no swizzle */ -# define R300_TX_FORMAT_B8G8_B8G8 0x14 /* no swizzle */ -# define R300_TX_FORMAT_G8R8_G8B8 0x15 /* no swizzle */ +# define R300_TX_FORMAT_A8R8G8B8 0x13 /* no swizzle */ +# define R300_TX_FORMAT_B8G8_B8G8 0x14 /* no swizzle */ +# define R300_TX_FORMAT_G8R8_G8B8 0x15 /* no swizzle */ /* 0x16 - some 16 bit green format.. ?? */ # define R300_TX_FORMAT_UNK25 (1 << 25) /* no swizzle */ # define R300_TX_FORMAT_CUBIC_MAP (1 << 26) @@ -867,19 +867,19 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. /* gap */ /* Floating point formats */ /* Note - hardware supports both 16 and 32 bit floating point */ -# define R300_TX_FORMAT_FL_I16 0x18 -# define R300_TX_FORMAT_FL_I16A16 0x19 +# define R300_TX_FORMAT_FL_I16 0x18 +# define R300_TX_FORMAT_FL_I16A16 0x19 # define R300_TX_FORMAT_FL_R16G16B16A16 0x1A -# define R300_TX_FORMAT_FL_I32 0x1B -# define R300_TX_FORMAT_FL_I32A32 0x1C +# define R300_TX_FORMAT_FL_I32 0x1B +# define R300_TX_FORMAT_FL_I32A32 0x1C # define R300_TX_FORMAT_FL_R32G32B32A32 0x1D /* alpha modes, convenience mostly */ /* if you have alpha, pick constant appropriate to the number of channels (1 for I8, 2 for I8A8, 4 for R8G8B8A8, etc */ -# define R300_TX_FORMAT_ALPHA_1CH 0x000 -# define R300_TX_FORMAT_ALPHA_2CH 0x200 -# define R300_TX_FORMAT_ALPHA_4CH 0x600 -# define R300_TX_FORMAT_ALPHA_NONE 0xA00 +# define R300_TX_FORMAT_ALPHA_1CH 0x000 +# define R300_TX_FORMAT_ALPHA_2CH 0x200 +# define R300_TX_FORMAT_ALPHA_4CH 0x600 +# define R300_TX_FORMAT_ALPHA_NONE 0xA00 /* Swizzling */ /* constants */ # define R300_TX_FORMAT_X 0 @@ -1360,11 +1360,11 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_RB3D_Z_DISABLED_2 0x00000014 # define R300_RB3D_Z_TEST 0x00000012 # define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 +# define R300_RB3D_Z_WRITE_ONLY 0x00000006 # define R300_RB3D_Z_TEST 0x00000012 # define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 +# define R300_RB3D_Z_WRITE_ONLY 0x00000006 # define R300_RB3D_STENCIL_ENABLE 0x00000001 #define R300_RB3D_ZSTENCIL_CNTL_1 0x4F04 diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 24fca8ec137..5dc799ab86b 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -816,6 +816,46 @@ static const u32 R300_cp_microcode[][2] = { {0000000000, 0000000000}, }; +static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) +{ + u32 ret; + RADEON_WRITE(R520_MC_IND_INDEX, 0x7f0000 | (addr & 0xff)); + ret = RADEON_READ(R520_MC_IND_DATA); + RADEON_WRITE(R520_MC_IND_INDEX, 0); + return ret; +} + +u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv) +{ + + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) + return RADEON_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION); + else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) + return RADEON_READ_MCIND(dev_priv, R520_MC_FB_LOCATION); + else + return RADEON_READ(RADEON_MC_FB_LOCATION); +} + +static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc) +{ + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) + RADEON_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc); + else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) + RADEON_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc); + else + RADEON_WRITE(RADEON_MC_FB_LOCATION, fb_loc); +} + +static void radeon_write_agp_location(drm_radeon_private_t *dev_priv, u32 agp_loc) +{ + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) + RADEON_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc); + else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) + RADEON_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc); + else + RADEON_WRITE(RADEON_MC_AGP_LOCATION, agp_loc); +} + static int RADEON_READ_PLL(struct drm_device * dev, int addr) { drm_radeon_private_t *dev_priv = dev->dev_private; @@ -824,7 +864,7 @@ static int RADEON_READ_PLL(struct drm_device * dev, int addr) return RADEON_READ(RADEON_CLOCK_CNTL_DATA); } -static int RADEON_READ_PCIE(drm_radeon_private_t *dev_priv, int addr) +static u32 RADEON_READ_PCIE(drm_radeon_private_t *dev_priv, int addr) { RADEON_WRITE8(RADEON_PCIE_INDEX, addr & 0xff); return RADEON_READ(RADEON_PCIE_DATA); @@ -1074,41 +1114,43 @@ static int radeon_do_engine_reset(struct drm_device * dev) radeon_do_pixcache_flush(dev_priv); - clock_cntl_index = RADEON_READ(RADEON_CLOCK_CNTL_INDEX); - mclk_cntl = RADEON_READ_PLL(dev, RADEON_MCLK_CNTL); - - RADEON_WRITE_PLL(RADEON_MCLK_CNTL, (mclk_cntl | - RADEON_FORCEON_MCLKA | - RADEON_FORCEON_MCLKB | - RADEON_FORCEON_YCLKA | - RADEON_FORCEON_YCLKB | - RADEON_FORCEON_MC | - RADEON_FORCEON_AIC)); - - rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET); - - RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | - RADEON_SOFT_RESET_CP | - RADEON_SOFT_RESET_HI | - RADEON_SOFT_RESET_SE | - RADEON_SOFT_RESET_RE | - RADEON_SOFT_RESET_PP | - RADEON_SOFT_RESET_E2 | - RADEON_SOFT_RESET_RB)); - RADEON_READ(RADEON_RBBM_SOFT_RESET); - RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset & - ~(RADEON_SOFT_RESET_CP | - RADEON_SOFT_RESET_HI | - RADEON_SOFT_RESET_SE | - RADEON_SOFT_RESET_RE | - RADEON_SOFT_RESET_PP | - RADEON_SOFT_RESET_E2 | - RADEON_SOFT_RESET_RB))); - RADEON_READ(RADEON_RBBM_SOFT_RESET); - - RADEON_WRITE_PLL(RADEON_MCLK_CNTL, mclk_cntl); - RADEON_WRITE(RADEON_CLOCK_CNTL_INDEX, clock_cntl_index); - RADEON_WRITE(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset); + if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) { + clock_cntl_index = RADEON_READ(RADEON_CLOCK_CNTL_INDEX); + mclk_cntl = RADEON_READ_PLL(dev, RADEON_MCLK_CNTL); + + RADEON_WRITE_PLL(RADEON_MCLK_CNTL, (mclk_cntl | + RADEON_FORCEON_MCLKA | + RADEON_FORCEON_MCLKB | + RADEON_FORCEON_YCLKA | + RADEON_FORCEON_YCLKB | + RADEON_FORCEON_MC | + RADEON_FORCEON_AIC)); + + rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET); + + RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | + RADEON_SOFT_RESET_CP | + RADEON_SOFT_RESET_HI | + RADEON_SOFT_RESET_SE | + RADEON_SOFT_RESET_RE | + RADEON_SOFT_RESET_PP | + RADEON_SOFT_RESET_E2 | + RADEON_SOFT_RESET_RB)); + RADEON_READ(RADEON_RBBM_SOFT_RESET); + RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset & + ~(RADEON_SOFT_RESET_CP | + RADEON_SOFT_RESET_HI | + RADEON_SOFT_RESET_SE | + RADEON_SOFT_RESET_RE | + RADEON_SOFT_RESET_PP | + RADEON_SOFT_RESET_E2 | + RADEON_SOFT_RESET_RB))); + RADEON_READ(RADEON_RBBM_SOFT_RESET); + + RADEON_WRITE_PLL(RADEON_MCLK_CNTL, mclk_cntl); + RADEON_WRITE(RADEON_CLOCK_CNTL_INDEX, clock_cntl_index); + RADEON_WRITE(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset); + } /* Reset the CP ring */ radeon_do_cp_reset(dev_priv); @@ -1127,21 +1169,21 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, { u32 ring_start, cur_read_ptr; u32 tmp; - + /* Initialize the memory controller. With new memory map, the fb location * is not changed, it should have been properly initialized already. Part * of the problem is that the code below is bogus, assuming the GART is * always appended to the fb which is not necessarily the case */ if (!dev_priv->new_memmap) - RADEON_WRITE(RADEON_MC_FB_LOCATION, + radeon_write_fb_location(dev_priv, ((dev_priv->gart_vm_start - 1) & 0xffff0000) | (dev_priv->fb_location >> 16)); #if __OS_HAS_AGP if (dev_priv->flags & RADEON_IS_AGP) { RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base); - RADEON_WRITE(RADEON_MC_AGP_LOCATION, + radeon_write_agp_location(dev_priv, (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | (dev_priv->gart_vm_start >> 16))); @@ -1190,9 +1232,15 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, /* Set ring buffer size */ #ifdef __BIG_ENDIAN RADEON_WRITE(RADEON_CP_RB_CNTL, - dev_priv->ring.size_l2qw | RADEON_BUF_SWAP_32BIT); + RADEON_BUF_SWAP_32BIT | + (dev_priv->ring.fetch_size_l2ow << 18) | + (dev_priv->ring.rptr_update_l2qw << 8) | + dev_priv->ring.size_l2qw); #else - RADEON_WRITE(RADEON_CP_RB_CNTL, dev_priv->ring.size_l2qw); + RADEON_WRITE(RADEON_CP_RB_CNTL, + (dev_priv->ring.fetch_size_l2ow << 18) | + (dev_priv->ring.rptr_update_l2qw << 8) | + dev_priv->ring.size_l2qw); #endif /* Start with assuming that writeback doesn't work */ @@ -1299,7 +1347,7 @@ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); dev_priv->gart_size = 32*1024*1024; - RADEON_WRITE(RADEON_MC_AGP_LOCATION, + radeon_write_agp_location(dev_priv, (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | (dev_priv->gart_vm_start >> 16))); @@ -1333,7 +1381,7 @@ static void radeon_set_pciegart(drm_radeon_private_t * dev_priv, int on) dev_priv->gart_vm_start + dev_priv->gart_size - 1); - RADEON_WRITE(RADEON_MC_AGP_LOCATION, 0xffffffc0); /* ?? */ + radeon_write_agp_location(dev_priv, 0xffffffc0); /* ?? */ RADEON_WRITE_PCIE(RADEON_PCIE_TX_GART_CNTL, RADEON_PCIE_TX_GART_EN); @@ -1358,7 +1406,7 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on) return; } - tmp = RADEON_READ(RADEON_AIC_CNTL); + tmp = RADEON_READ(RADEON_AIC_CNTL); if (on) { RADEON_WRITE(RADEON_AIC_CNTL, @@ -1376,7 +1424,7 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on) /* Turn off AGP aperture -- is this required for PCI GART? */ - RADEON_WRITE(RADEON_MC_AGP_LOCATION, 0xffffffc0); /* ?? */ + radeon_write_agp_location(dev_priv, 0xffffffc0); RADEON_WRITE(RADEON_AGP_COMMAND, 0); /* clear AGP_COMMAND */ } else { RADEON_WRITE(RADEON_AIC_CNTL, @@ -1581,10 +1629,9 @@ static int radeon_do_init_cp(struct drm_device * dev, drm_radeon_init_t * init) dev->agp_buffer_map->handle); } - dev_priv->fb_location = (RADEON_READ(RADEON_MC_FB_LOCATION) - & 0xffff) << 16; - dev_priv->fb_size = - ((RADEON_READ(RADEON_MC_FB_LOCATION) & 0xffff0000u) + 0x10000) + dev_priv->fb_location = (radeon_read_fb_location(dev_priv) & 0xffff) << 16; + dev_priv->fb_size = + ((radeon_read_fb_location(dev_priv) & 0xffff0000u) + 0x10000) - dev_priv->fb_location; dev_priv->front_pitch_offset = (((dev_priv->front_pitch / 64) << 22) | @@ -1630,7 +1677,7 @@ static int radeon_do_init_cp(struct drm_device * dev, drm_radeon_init_t * init) ((base + dev_priv->gart_size) & 0xfffffffful) < base) base = dev_priv->fb_location - dev_priv->gart_size; - } + } dev_priv->gart_vm_start = base & 0xffc00000u; if (dev_priv->gart_vm_start != base) DRM_INFO("GART aligned down from 0x%08x to 0x%08x\n", @@ -1663,6 +1710,11 @@ static int radeon_do_init_cp(struct drm_device * dev, drm_radeon_init_t * init) dev_priv->ring.size = init->ring_size; dev_priv->ring.size_l2qw = drm_order(init->ring_size / 8); + dev_priv->ring.rptr_update = /* init->rptr_update */ 4096; + dev_priv->ring.rptr_update_l2qw = drm_order( /* init->rptr_update */ 4096 / 8); + + dev_priv->ring.fetch_size = /* init->fetch_size */ 32; + dev_priv->ring.fetch_size_l2ow = drm_order( /* init->fetch_size */ 32 / 16); dev_priv->ring.tail_mask = (dev_priv->ring.size / sizeof(u32)) - 1; dev_priv->ring.high_mark = RADEON_RING_HIGH_MARK; @@ -1830,7 +1882,7 @@ int radeon_cp_init(struct drm_device *dev, void *data, struct drm_file *file_pri LOCK_TEST_WITH_RETURN(dev, file_priv); if (init->func == RADEON_INIT_R300_CP) - r300_init_reg_flags(); + r300_init_reg_flags(dev); switch (init->func) { case RADEON_INIT_CP: @@ -1852,12 +1904,12 @@ int radeon_cp_start(struct drm_device *dev, void *data, struct drm_file *file_pr LOCK_TEST_WITH_RETURN(dev, file_priv); if (dev_priv->cp_running) { - DRM_DEBUG("%s while CP running\n", __FUNCTION__); + DRM_DEBUG("while CP running\n"); return 0; } if (dev_priv->cp_mode == RADEON_CSQ_PRIDIS_INDDIS) { - DRM_DEBUG("%s called with bogus CP mode (%d)\n", - __FUNCTION__, dev_priv->cp_mode); + DRM_DEBUG("called with bogus CP mode (%d)\n", + dev_priv->cp_mode); return 0; } @@ -1962,7 +2014,7 @@ int radeon_cp_reset(struct drm_device *dev, void *data, struct drm_file *file_pr LOCK_TEST_WITH_RETURN(dev, file_priv); if (!dev_priv) { - DRM_DEBUG("%s called before init done\n", __FUNCTION__); + DRM_DEBUG("called before init done\n"); return -EINVAL; } @@ -2239,6 +2291,10 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags) case CHIP_R350: case CHIP_R420: case CHIP_RV410: + case CHIP_RV515: + case CHIP_R520: + case CHIP_RV570: + case CHIP_R580: dev_priv->flags |= RADEON_HAS_HIERZ; break; default: diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h index 5a8e23f916f..71e5b21fad2 100644 --- a/drivers/char/drm/radeon_drm.h +++ b/drivers/char/drm/radeon_drm.h @@ -223,10 +223,10 @@ typedef union { #define R300_CMD_CP_DELAY 5 #define R300_CMD_DMA_DISCARD 6 #define R300_CMD_WAIT 7 -# define R300_WAIT_2D 0x1 -# define R300_WAIT_3D 0x2 -# define R300_WAIT_2D_CLEAN 0x3 -# define R300_WAIT_3D_CLEAN 0x4 +# define R300_WAIT_2D 0x1 +# define R300_WAIT_3D 0x2 +# define R300_WAIT_2D_CLEAN 0x3 +# define R300_WAIT_3D_CLEAN 0x4 #define R300_CMD_SCRATCH 8 typedef union { @@ -656,6 +656,7 @@ typedef struct drm_radeon_indirect { #define RADEON_PARAM_SCRATCH_OFFSET 11 #define RADEON_PARAM_CARD_TYPE 12 #define RADEON_PARAM_VBLANK_CRTC 13 /* VBLANK CRTC */ +#define RADEON_PARAM_FB_LOCATION 14 /* FB location */ typedef struct drm_radeon_getparam { int param; @@ -722,7 +723,7 @@ typedef struct drm_radeon_surface_free { unsigned int address; } drm_radeon_surface_free_t; -#define DRM_RADEON_VBLANK_CRTC1 1 -#define DRM_RADEON_VBLANK_CRTC2 2 +#define DRM_RADEON_VBLANK_CRTC1 1 +#define DRM_RADEON_VBLANK_CRTC2 2 #endif diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index bfbb60a9298..4434332c79b 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -123,6 +123,12 @@ enum radeon_family { CHIP_R420, CHIP_RV410, CHIP_RS400, + CHIP_RV515, + CHIP_R520, + CHIP_RV530, + CHIP_RV560, + CHIP_RV570, + CHIP_R580, CHIP_LAST, }; @@ -166,6 +172,12 @@ typedef struct drm_radeon_ring_buffer { int size; int size_l2qw; + int rptr_update; /* Double Words */ + int rptr_update_l2qw; /* log2 Quad Words */ + + int fetch_size; /* Double Words */ + int fetch_size_l2ow; /* log2 Oct Words */ + u32 tail; u32 tail_mask; int space; @@ -336,6 +348,7 @@ extern int radeon_cp_resume(struct drm_device *dev, void *data, struct drm_file extern int radeon_engine_reset(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int radeon_fullscreen(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int radeon_cp_buffers(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv); extern void radeon_freelist_reset(struct drm_device * dev); extern struct drm_buf *radeon_freelist_get(struct drm_device * dev); @@ -382,7 +395,7 @@ extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); /* r300_cmdbuf.c */ -extern void r300_init_reg_flags(void); +extern void r300_init_reg_flags(struct drm_device *dev); extern int r300_do_cp_cmdbuf(struct drm_device * dev, struct drm_file *file_priv, @@ -429,7 +442,7 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PCIE_INDEX 0x0030 #define RADEON_PCIE_DATA 0x0034 #define RADEON_PCIE_TX_GART_CNTL 0x10 -# define RADEON_PCIE_TX_GART_EN (1 << 0) +# define RADEON_PCIE_TX_GART_EN (1 << 0) # define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0<<1) # define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1<<1) # define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3<<1) @@ -439,7 +452,7 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, # define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1<<8) #define RADEON_PCIE_TX_DISCARD_RD_ADDR_LO 0x11 #define RADEON_PCIE_TX_DISCARD_RD_ADDR_HI 0x12 -#define RADEON_PCIE_TX_GART_BASE 0x13 +#define RADEON_PCIE_TX_GART_BASE 0x13 #define RADEON_PCIE_TX_GART_START_LO 0x14 #define RADEON_PCIE_TX_GART_START_HI 0x15 #define RADEON_PCIE_TX_GART_END_LO 0x16 @@ -454,6 +467,16 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_IGPGART_ENABLE 0x38 #define RADEON_IGPGART_UNK_39 0x39 +#define R520_MC_IND_INDEX 0x70 +#define R520_MC_IND_WR_EN (1<<24) +#define R520_MC_IND_DATA 0x74 + +#define RV515_MC_FB_LOCATION 0x01 +#define RV515_MC_AGP_LOCATION 0x02 + +#define R520_MC_FB_LOCATION 0x04 +#define R520_MC_AGP_LOCATION 0x05 + #define RADEON_MPP_TB_CONFIG 0x01c0 #define RADEON_MEM_CNTL 0x0140 #define RADEON_MEM_SDRAM_MODE_REG 0x0158 @@ -512,12 +535,12 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_GEN_INT_STATUS 0x0044 # define RADEON_CRTC_VBLANK_STAT (1 << 0) -# define RADEON_CRTC_VBLANK_STAT_ACK (1 << 0) +# define RADEON_CRTC_VBLANK_STAT_ACK (1 << 0) # define RADEON_CRTC2_VBLANK_STAT (1 << 9) -# define RADEON_CRTC2_VBLANK_STAT_ACK (1 << 9) +# define RADEON_CRTC2_VBLANK_STAT_ACK (1 << 9) # define RADEON_GUI_IDLE_INT_TEST_ACK (1 << 19) # define RADEON_SW_INT_TEST (1 << 25) -# define RADEON_SW_INT_TEST_ACK (1 << 25) +# define RADEON_SW_INT_TEST_ACK (1 << 25) # define RADEON_SW_INT_FIRE (1 << 26) #define RADEON_HOST_PATH_CNTL 0x0130 @@ -615,9 +638,51 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, # define RADEON_SOFT_RESET_E2 (1 << 5) # define RADEON_SOFT_RESET_RB (1 << 6) # define RADEON_SOFT_RESET_HDP (1 << 7) +/* + * 6:0 Available slots in the FIFO + * 8 Host Interface active + * 9 CP request active + * 10 FIFO request active + * 11 Host Interface retry active + * 12 CP retry active + * 13 FIFO retry active + * 14 FIFO pipeline busy + * 15 Event engine busy + * 16 CP command stream busy + * 17 2D engine busy + * 18 2D portion of render backend busy + * 20 3D setup engine busy + * 26 GA engine busy + * 27 CBA 2D engine busy + * 31 2D engine busy or 3D engine busy or FIFO not empty or CP busy or + * command stream queue not empty or Ring Buffer not empty + */ #define RADEON_RBBM_STATUS 0x0e40 +/* Same as the previous RADEON_RBBM_STATUS; this is a mirror of that register. */ +/* #define RADEON_RBBM_STATUS 0x1740 */ +/* bits 6:0 are dword slots available in the cmd fifo */ # define RADEON_RBBM_FIFOCNT_MASK 0x007f -# define RADEON_RBBM_ACTIVE (1 << 31) +# define RADEON_HIRQ_ON_RBB (1 << 8) +# define RADEON_CPRQ_ON_RBB (1 << 9) +# define RADEON_CFRQ_ON_RBB (1 << 10) +# define RADEON_HIRQ_IN_RTBUF (1 << 11) +# define RADEON_CPRQ_IN_RTBUF (1 << 12) +# define RADEON_CFRQ_IN_RTBUF (1 << 13) +# define RADEON_PIPE_BUSY (1 << 14) +# define RADEON_ENG_EV_BUSY (1 << 15) +# define RADEON_CP_CMDSTRM_BUSY (1 << 16) +# define RADEON_E2_BUSY (1 << 17) +# define RADEON_RB2D_BUSY (1 << 18) +# define RADEON_RB3D_BUSY (1 << 19) /* not used on r300 */ +# define RADEON_VAP_BUSY (1 << 20) +# define RADEON_RE_BUSY (1 << 21) /* not used on r300 */ +# define RADEON_TAM_BUSY (1 << 22) /* not used on r300 */ +# define RADEON_TDM_BUSY (1 << 23) /* not used on r300 */ +# define RADEON_PB_BUSY (1 << 24) /* not used on r300 */ +# define RADEON_TIM_BUSY (1 << 25) /* not used on r300 */ +# define RADEON_GA_BUSY (1 << 26) +# define RADEON_CBA2D_BUSY (1 << 27) +# define RADEON_RBBM_ACTIVE (1 << 31) #define RADEON_RE_LINE_PATTERN 0x1cd0 #define RADEON_RE_MISC 0x26c4 #define RADEON_RE_TOP_LEFT 0x26c0 @@ -1004,6 +1069,13 @@ do { \ RADEON_WRITE( RADEON_PCIE_DATA, (val) ); \ } while (0) +#define RADEON_WRITE_MCIND( addr, val ) \ + do { \ + RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \ + RADEON_WRITE(R520_MC_IND_DATA, (val)); \ + RADEON_WRITE(R520_MC_IND_INDEX, 0); \ + } while (0) + #define CP_PACKET0( reg, n ) \ (RADEON_CP_PACKET0 | ((n) << 16) | ((reg) >> 2)) #define CP_PACKET0_TABLE( reg, n ) \ @@ -1114,8 +1186,7 @@ do { \ #define BEGIN_RING( n ) do { \ if ( RADEON_VERBOSE ) { \ - DRM_INFO( "BEGIN_RING( %d ) in %s\n", \ - n, __FUNCTION__ ); \ + DRM_INFO( "BEGIN_RING( %d )\n", (n)); \ } \ if ( dev_priv->ring.space <= (n) * sizeof(u32) ) { \ COMMIT_RING(); \ @@ -1133,7 +1204,7 @@ do { \ write, dev_priv->ring.tail ); \ } \ if (((dev_priv->ring.tail + _nr) & mask) != write) { \ - DRM_ERROR( \ + DRM_ERROR( \ "ADVANCE_RING(): mismatch: nr: %x write: %x line: %d\n", \ ((dev_priv->ring.tail + _nr) & mask), \ write, __LINE__); \ diff --git a/drivers/char/drm/radeon_irq.c b/drivers/char/drm/radeon_irq.c index 84f5bc36252..009af3814b6 100644 --- a/drivers/char/drm/radeon_irq.c +++ b/drivers/char/drm/radeon_irq.c @@ -154,7 +154,7 @@ static int radeon_driver_vblank_do_wait(struct drm_device * dev, int ack = 0; atomic_t *counter; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -205,7 +205,7 @@ int radeon_irq_emit(struct drm_device *dev, void *data, struct drm_file *file_pr LOCK_TEST_WITH_RETURN(dev, file_priv); if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -227,7 +227,7 @@ int radeon_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_pr drm_radeon_irq_wait_t *irqwait = data; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } diff --git a/drivers/char/drm/radeon_mem.c b/drivers/char/drm/radeon_mem.c index a29acfe2f97..78b34fa7c89 100644 --- a/drivers/char/drm/radeon_mem.c +++ b/drivers/char/drm/radeon_mem.c @@ -224,7 +224,7 @@ int radeon_mem_alloc(struct drm_device *dev, void *data, struct drm_file *file_p struct mem_block *block, **heap; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -259,7 +259,7 @@ int radeon_mem_free(struct drm_device *dev, void *data, struct drm_file *file_pr struct mem_block *block, **heap; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -285,7 +285,7 @@ int radeon_mem_init_heap(struct drm_device *dev, void *data, struct drm_file *fi struct mem_block **heap; if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index f824f2f5fdc..6f75512f591 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -898,7 +898,7 @@ static void radeon_cp_dispatch_clear(struct drm_device * dev, int w = pbox[i].x2 - x; int h = pbox[i].y2 - y; - DRM_DEBUG("dispatch clear %d,%d-%d,%d flags 0x%x\n", + DRM_DEBUG("%d,%d-%d,%d flags 0x%x\n", x, y, w, h, flags); if (flags & RADEON_FRONT) { @@ -1368,7 +1368,7 @@ static void radeon_cp_dispatch_swap(struct drm_device * dev) int w = pbox[i].x2 - x; int h = pbox[i].y2 - y; - DRM_DEBUG("dispatch swap %d,%d-%d,%d\n", x, y, w, h); + DRM_DEBUG("%d,%d-%d,%d\n", x, y, w, h); BEGIN_RING(9); @@ -1422,8 +1422,7 @@ static void radeon_cp_dispatch_flip(struct drm_device * dev) int offset = (dev_priv->sarea_priv->pfCurrentPage == 1) ? dev_priv->front_offset : dev_priv->back_offset; RING_LOCALS; - DRM_DEBUG("%s: pfCurrentPage=%d\n", - __FUNCTION__, + DRM_DEBUG("pfCurrentPage=%d\n", dev_priv->sarea_priv->pfCurrentPage); /* Do some trivial performance monitoring... @@ -1562,7 +1561,7 @@ static void radeon_cp_dispatch_indirect(struct drm_device * dev, { drm_radeon_private_t *dev_priv = dev->dev_private; RING_LOCALS; - DRM_DEBUG("indirect: buf=%d s=0x%x e=0x%x\n", buf->idx, start, end); + DRM_DEBUG("buf=%d s=0x%x e=0x%x\n", buf->idx, start, end); if (start != end) { int offset = (dev_priv->gart_buffers_offset @@ -1758,7 +1757,7 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, buf = radeon_freelist_get(dev); } if (!buf) { - DRM_DEBUG("radeon_cp_dispatch_texture: EAGAIN\n"); + DRM_DEBUG("EAGAIN\n"); if (DRM_COPY_TO_USER(tex->image, image, sizeof(*image))) return -EFAULT; return -EAGAIN; @@ -2413,7 +2412,7 @@ static int radeon_cp_indirect(struct drm_device *dev, void *data, struct drm_fil LOCK_TEST_WITH_RETURN(dev, file_priv); - DRM_DEBUG("indirect: idx=%d s=%d e=%d d=%d\n", + DRM_DEBUG("idx=%d s=%d e=%d d=%d\n", indirect->idx, indirect->start, indirect->end, indirect->discard); @@ -2779,7 +2778,7 @@ static int radeon_emit_wait(struct drm_device * dev, int flags) drm_radeon_private_t *dev_priv = dev->dev_private; RING_LOCALS; - DRM_DEBUG("%s: %x\n", __FUNCTION__, flags); + DRM_DEBUG("%x\n", flags); switch (flags) { case RADEON_WAIT_2D: BEGIN_RING(2); @@ -3035,6 +3034,9 @@ static int radeon_cp_getparam(struct drm_device *dev, void *data, struct drm_fil case RADEON_PARAM_VBLANK_CRTC: value = radeon_vblank_crtc_get(dev); break; + case RADEON_PARAM_FB_LOCATION: + value = radeon_read_fb_location(dev_priv); + break; default: DRM_DEBUG("Invalid parameter %d\n", param->param); return -EINVAL; diff --git a/drivers/char/drm/savage_state.c b/drivers/char/drm/savage_state.c index bf8e0e10fe2..5f6238fdf1f 100644 --- a/drivers/char/drm/savage_state.c +++ b/drivers/char/drm/savage_state.c @@ -512,7 +512,7 @@ static int savage_dispatch_vb_prim(drm_savage_private_t * dev_priv, DMA_DRAW_PRIMITIVE(count, prim, skip); if (vb_stride == vtx_size) { - DMA_COPY(&vtxbuf[vb_stride * start], + DMA_COPY(&vtxbuf[vb_stride * start], vtx_size * count); } else { for (i = start; i < start + count; ++i) { @@ -742,7 +742,7 @@ static int savage_dispatch_vb_idx(drm_savage_private_t * dev_priv, while (n != 0) { /* Can emit up to 255 vertices (85 triangles) at once. */ unsigned int count = n > 255 ? 255 : n; - + /* Check indices */ for (i = 0; i < count; ++i) { if (idx[i] > vb_size / (vb_stride * 4)) { @@ -933,7 +933,7 @@ static int savage_dispatch_draw(drm_savage_private_t * dev_priv, /* j was check in savage_bci_cmdbuf */ ret = savage_dispatch_vb_idx(dev_priv, &cmd_header, (const uint16_t *)cmdbuf, - (const uint32_t *)vtxbuf, vb_size, + (const uint32_t *)vtxbuf, vb_size, vb_stride); cmdbuf += j; break; diff --git a/drivers/char/drm/sis_mm.c b/drivers/char/drm/sis_mm.c index a6b7ccdaf73..b3878770fce 100644 --- a/drivers/char/drm/sis_mm.c +++ b/drivers/char/drm/sis_mm.c @@ -115,7 +115,7 @@ static int sis_fb_init(struct drm_device *dev, void *data, struct drm_file *file dev_priv->vram_offset = fb->offset; mutex_unlock(&dev->struct_mutex); - DRM_DEBUG("offset = %u, size = %u", fb->offset, fb->size); + DRM_DEBUG("offset = %u, size = %u\n", fb->offset, fb->size); return 0; } @@ -205,7 +205,7 @@ static int sis_ioctl_agp_init(struct drm_device *dev, void *data, dev_priv->agp_offset = agp->offset; mutex_unlock(&dev->struct_mutex); - DRM_DEBUG("offset = %u, size = %u", agp->offset, agp->size); + DRM_DEBUG("offset = %u, size = %u\n", agp->offset, agp->size); return 0; } @@ -249,7 +249,7 @@ int sis_idle(struct drm_device *dev) return 0; } } - + /* * Implement a device switch here if needed */ diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c index 7009dbddac4..94baec692b5 100644 --- a/drivers/char/drm/via_dma.c +++ b/drivers/char/drm/via_dma.c @@ -179,14 +179,12 @@ static int via_initialize(struct drm_device * dev, } if (dev_priv->ring.virtual_start != NULL) { - DRM_ERROR("%s called again without calling cleanup\n", - __FUNCTION__); + DRM_ERROR("called again without calling cleanup\n"); return -EFAULT; } if (!dev->agp || !dev->agp->base) { - DRM_ERROR("%s called with no agp memory available\n", - __FUNCTION__); + DRM_ERROR("called with no agp memory available\n"); return -EFAULT; } @@ -267,8 +265,7 @@ static int via_dispatch_cmdbuffer(struct drm_device * dev, drm_via_cmdbuffer_t * dev_priv = (drm_via_private_t *) dev->dev_private; if (dev_priv->ring.virtual_start == NULL) { - DRM_ERROR("%s called without initializing AGP ring buffer.\n", - __FUNCTION__); + DRM_ERROR("called without initializing AGP ring buffer.\n"); return -EFAULT; } @@ -337,8 +334,7 @@ static int via_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *fi LOCK_TEST_WITH_RETURN(dev, file_priv); - DRM_DEBUG("via cmdbuffer, buf %p size %lu\n", cmdbuf->buf, - cmdbuf->size); + DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size); ret = via_dispatch_cmdbuffer(dev, cmdbuf); if (ret) { @@ -379,8 +375,7 @@ static int via_pci_cmdbuffer(struct drm_device *dev, void *data, struct drm_file LOCK_TEST_WITH_RETURN(dev, file_priv); - DRM_DEBUG("via_pci_cmdbuffer, buf %p size %lu\n", cmdbuf->buf, - cmdbuf->size); + DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size); ret = via_dispatch_pci_cmdbuffer(dev, cmdbuf); if (ret) { @@ -648,14 +643,13 @@ static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file * uint32_t tmp_size, count; drm_via_private_t *dev_priv; - DRM_DEBUG("via cmdbuf_size\n"); + DRM_DEBUG("\n"); LOCK_TEST_WITH_RETURN(dev, file_priv); dev_priv = (drm_via_private_t *) dev->dev_private; if (dev_priv->ring.virtual_start == NULL) { - DRM_ERROR("%s called without initializing AGP ring buffer.\n", - __FUNCTION__); + DRM_ERROR("called without initializing AGP ring buffer.\n"); return -EFAULT; } diff --git a/drivers/char/drm/via_dmablit.c b/drivers/char/drm/via_dmablit.c index c6fd16f3cb4..33c5197b73c 100644 --- a/drivers/char/drm/via_dmablit.c +++ b/drivers/char/drm/via_dmablit.c @@ -1,5 +1,5 @@ /* via_dmablit.c -- PCI DMA BitBlt support for the VIA Unichrome/Pro - * + * * Copyright (C) 2005 Thomas Hellstrom, All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a @@ -16,22 +16,22 @@ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE * USE OR OTHER DEALINGS IN THE SOFTWARE. * - * Authors: + * Authors: * Thomas Hellstrom. * Partially based on code obtained from Digeo Inc. */ /* - * Unmaps the DMA mappings. - * FIXME: Is this a NoOp on x86? Also - * FIXME: What happens if this one is called and a pending blit has previously done - * the same DMA mappings? + * Unmaps the DMA mappings. + * FIXME: Is this a NoOp on x86? Also + * FIXME: What happens if this one is called and a pending blit has previously done + * the same DMA mappings? */ #include "drmP.h" @@ -65,7 +65,7 @@ via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg) int num_desc = vsg->num_desc; unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page; unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page; - drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] + + drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] + descriptor_this_page; dma_addr_t next = vsg->chain_start; @@ -73,7 +73,7 @@ via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg) if (descriptor_this_page-- == 0) { cur_descriptor_page--; descriptor_this_page = vsg->descriptors_per_page - 1; - desc_ptr = vsg->desc_pages[cur_descriptor_page] + + desc_ptr = vsg->desc_pages[cur_descriptor_page] + descriptor_this_page; } dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE); @@ -93,7 +93,7 @@ via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg) static void via_map_blit_for_device(struct pci_dev *pdev, const drm_via_dmablit_t *xfer, - drm_via_sg_info_t *vsg, + drm_via_sg_info_t *vsg, int mode) { unsigned cur_descriptor_page = 0; @@ -110,7 +110,7 @@ via_map_blit_for_device(struct pci_dev *pdev, dma_addr_t next = 0 | VIA_DMA_DPR_EC; drm_via_descriptor_t *desc_ptr = NULL; - if (mode == 1) + if (mode == 1) desc_ptr = vsg->desc_pages[cur_descriptor_page]; for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) { @@ -118,24 +118,24 @@ via_map_blit_for_device(struct pci_dev *pdev, line_len = xfer->line_length; cur_fb = fb_addr; cur_mem = mem_addr; - + while (line_len > 0) { remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len); line_len -= remaining_len; if (mode == 1) { - desc_ptr->mem_addr = - dma_map_page(&pdev->dev, - vsg->pages[VIA_PFN(cur_mem) - + desc_ptr->mem_addr = + dma_map_page(&pdev->dev, + vsg->pages[VIA_PFN(cur_mem) - VIA_PFN(first_addr)], - VIA_PGOFF(cur_mem), remaining_len, + VIA_PGOFF(cur_mem), remaining_len, vsg->direction); desc_ptr->dev_addr = cur_fb; - + desc_ptr->size = remaining_len; desc_ptr->next = (uint32_t) next; - next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr), + next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr), DMA_TO_DEVICE); desc_ptr++; if (++num_descriptors_this_page >= vsg->descriptors_per_page) { @@ -143,12 +143,12 @@ via_map_blit_for_device(struct pci_dev *pdev, desc_ptr = vsg->desc_pages[++cur_descriptor_page]; } } - + num_desc++; cur_mem += remaining_len; cur_fb += remaining_len; } - + mem_addr += xfer->mem_stride; fb_addr += xfer->fb_stride; } @@ -161,14 +161,14 @@ via_map_blit_for_device(struct pci_dev *pdev, } /* - * Function that frees up all resources for a blit. It is usable even if the + * Function that frees up all resources for a blit. It is usable even if the * blit info has only been partially built as long as the status enum is consistent * with the actual status of the used resources. */ static void -via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) +via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) { struct page *page; int i; @@ -185,7 +185,7 @@ via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) case dr_via_pages_locked: for (i=0; i<vsg->num_pages; ++i) { if ( NULL != (page = vsg->pages[i])) { - if (! PageReserved(page) && (DMA_FROM_DEVICE == vsg->direction)) + if (! PageReserved(page) && (DMA_FROM_DEVICE == vsg->direction)) SetPageDirty(page); page_cache_release(page); } @@ -200,7 +200,7 @@ via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) vsg->bounce_buffer = NULL; } vsg->free_on_sequence = 0; -} +} /* * Fire a blit engine. @@ -213,7 +213,7 @@ via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine) VIA_WRITE(VIA_PCI_DMA_MAR0 + engine*0x10, 0); VIA_WRITE(VIA_PCI_DMA_DAR0 + engine*0x10, 0); - VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD | + VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD | VIA_DMA_CSR_DE); VIA_WRITE(VIA_PCI_DMA_MR0 + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE); VIA_WRITE(VIA_PCI_DMA_BCR0 + engine*0x10, 0); @@ -233,9 +233,9 @@ via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) { int ret; unsigned long first_pfn = VIA_PFN(xfer->mem_addr); - vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride -1)) - + vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride -1)) - first_pfn + 1; - + if (NULL == (vsg->pages = vmalloc(sizeof(struct page *) * vsg->num_pages))) return -ENOMEM; memset(vsg->pages, 0, sizeof(struct page *) * vsg->num_pages); @@ -248,7 +248,7 @@ via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) up_read(¤t->mm->mmap_sem); if (ret != vsg->num_pages) { - if (ret < 0) + if (ret < 0) return ret; vsg->state = dr_via_pages_locked; return -EINVAL; @@ -264,21 +264,21 @@ via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) * quite large for some blits, and pages don't need to be contingous. */ -static int +static int via_alloc_desc_pages(drm_via_sg_info_t *vsg) { int i; - + vsg->descriptors_per_page = PAGE_SIZE / sizeof( drm_via_descriptor_t); - vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) / + vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) / vsg->descriptors_per_page; if (NULL == (vsg->desc_pages = kcalloc(vsg->num_desc_pages, sizeof(void *), GFP_KERNEL))) return -ENOMEM; - + vsg->state = dr_via_desc_pages_alloc; for (i=0; i<vsg->num_desc_pages; ++i) { - if (NULL == (vsg->desc_pages[i] = + if (NULL == (vsg->desc_pages[i] = (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL))) return -ENOMEM; } @@ -286,7 +286,7 @@ via_alloc_desc_pages(drm_via_sg_info_t *vsg) vsg->num_desc); return 0; } - + static void via_abort_dmablit(struct drm_device *dev, int engine) { @@ -300,7 +300,7 @@ via_dmablit_engine_off(struct drm_device *dev, int engine) { drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD); + VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD); } @@ -311,7 +311,7 @@ via_dmablit_engine_off(struct drm_device *dev, int engine) * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while * the workqueue task takes care of processing associated with the old blit. */ - + void via_dmablit_handler(struct drm_device *dev, int engine, int from_irq) { @@ -331,19 +331,19 @@ via_dmablit_handler(struct drm_device *dev, int engine, int from_irq) spin_lock_irqsave(&blitq->blit_lock, irqsave); } - done_transfer = blitq->is_active && + done_transfer = blitq->is_active && (( status = VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD); - done_transfer = done_transfer || ( blitq->aborting && !(status & VIA_DMA_CSR_DE)); + done_transfer = done_transfer || ( blitq->aborting && !(status & VIA_DMA_CSR_DE)); cur = blitq->cur; if (done_transfer) { blitq->blits[cur]->aborted = blitq->aborting; blitq->done_blit_handle++; - DRM_WAKEUP(blitq->blit_queue + cur); + DRM_WAKEUP(blitq->blit_queue + cur); cur++; - if (cur >= VIA_NUM_BLIT_SLOTS) + if (cur >= VIA_NUM_BLIT_SLOTS) cur = 0; blitq->cur = cur; @@ -355,7 +355,7 @@ via_dmablit_handler(struct drm_device *dev, int engine, int from_irq) blitq->is_active = 0; blitq->aborting = 0; - schedule_work(&blitq->wq); + schedule_work(&blitq->wq); } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) { @@ -367,7 +367,7 @@ via_dmablit_handler(struct drm_device *dev, int engine, int from_irq) blitq->aborting = 1; blitq->end = jiffies + DRM_HZ; } - + if (!blitq->is_active) { if (blitq->num_outstanding) { via_fire_dmablit(dev, blitq->blits[cur], engine); @@ -383,14 +383,14 @@ via_dmablit_handler(struct drm_device *dev, int engine, int from_irq) } via_dmablit_engine_off(dev, engine); } - } + } if (from_irq) { spin_unlock(&blitq->blit_lock); } else { spin_unlock_irqrestore(&blitq->blit_lock, irqsave); } -} +} @@ -426,13 +426,13 @@ via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_que return active; } - + /* * Sync. Wait for at least three seconds for the blit to be performed. */ static int -via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine) +via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine) { drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; @@ -441,12 +441,12 @@ via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine) int ret = 0; if (via_dmablit_active(blitq, engine, handle, &queue)) { - DRM_WAIT_ON(ret, *queue, 3 * DRM_HZ, + DRM_WAIT_ON(ret, *queue, 3 * DRM_HZ, !via_dmablit_active(blitq, engine, handle, NULL)); } DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n", handle, engine, ret); - + return ret; } @@ -468,12 +468,12 @@ via_dmablit_timer(unsigned long data) struct drm_device *dev = blitq->dev; int engine = (int) (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues); - - DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine, + + DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine, (unsigned long) jiffies); via_dmablit_handler(dev, engine, 0); - + if (!timer_pending(&blitq->poll_timer)) { mod_timer(&blitq->poll_timer, jiffies + 1); @@ -497,7 +497,7 @@ via_dmablit_timer(unsigned long data) */ -static void +static void via_dmablit_workqueue(struct work_struct *work) { drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq); @@ -505,38 +505,38 @@ via_dmablit_workqueue(struct work_struct *work) unsigned long irqsave; drm_via_sg_info_t *cur_sg; int cur_released; - - - DRM_DEBUG("Workqueue task called for blit engine %ld\n",(unsigned long) + + + DRM_DEBUG("Workqueue task called for blit engine %ld\n",(unsigned long) (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues)); spin_lock_irqsave(&blitq->blit_lock, irqsave); - + while(blitq->serviced != blitq->cur) { cur_released = blitq->serviced++; DRM_DEBUG("Releasing blit slot %d\n", cur_released); - if (blitq->serviced >= VIA_NUM_BLIT_SLOTS) + if (blitq->serviced >= VIA_NUM_BLIT_SLOTS) blitq->serviced = 0; - + cur_sg = blitq->blits[cur_released]; blitq->num_free++; - + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - + DRM_WAKEUP(&blitq->busy_queue); - + via_free_sg_info(dev->pdev, cur_sg); kfree(cur_sg); - + spin_lock_irqsave(&blitq->blit_lock, irqsave); } spin_unlock_irqrestore(&blitq->blit_lock, irqsave); } - + /* * Init all blit engines. Currently we use two, but some hardware have 4. @@ -550,8 +550,8 @@ via_init_dmablit(struct drm_device *dev) drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; drm_via_blitq_t *blitq; - pci_set_master(dev->pdev); - + pci_set_master(dev->pdev); + for (i=0; i< VIA_NUM_BLIT_ENGINES; ++i) { blitq = dev_priv->blit_queues + i; blitq->dev = dev; @@ -572,20 +572,20 @@ via_init_dmablit(struct drm_device *dev) INIT_WORK(&blitq->wq, via_dmablit_workqueue); setup_timer(&blitq->poll_timer, via_dmablit_timer, (unsigned long)blitq); - } + } } /* * Build all info and do all mappings required for a blit. */ - + static int via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) { int draw = xfer->to_fb; int ret = 0; - + vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; vsg->bounce_buffer = NULL; @@ -599,7 +599,7 @@ via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmabli /* * Below check is a driver limitation, not a hardware one. We * don't want to lock unused pages, and don't want to incoporate the - * extra logic of avoiding them. Make sure there are no. + * extra logic of avoiding them. Make sure there are no. * (Not a big limitation anyway.) */ @@ -625,11 +625,11 @@ via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmabli if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) { DRM_ERROR("Too large PCI DMA bitblt.\n"); return -EINVAL; - } + } - /* + /* * we allow a negative fb stride to allow flipping of images in - * transfer. + * transfer. */ if (xfer->mem_stride < xfer->line_length || @@ -653,11 +653,11 @@ via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmabli #else if ((((unsigned long)xfer->mem_addr & 15) || ((unsigned long)xfer->fb_addr & 3)) || - ((xfer->num_lines > 1) && + ((xfer->num_lines > 1) && ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) { DRM_ERROR("Invalid DRM bitblt alignment.\n"); return -EINVAL; - } + } #endif if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) { @@ -673,17 +673,17 @@ via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmabli return ret; } via_map_blit_for_device(dev->pdev, xfer, vsg, 1); - + return 0; } - + /* * Reserve one free slot in the blit queue. Will wait for one second for one * to become available. Otherwise -EBUSY is returned. */ -static int +static int via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine) { int ret=0; @@ -698,10 +698,10 @@ via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine) if (ret) { return (-EINTR == ret) ? -EAGAIN : ret; } - + spin_lock_irqsave(&blitq->blit_lock, irqsave); } - + blitq->num_free--; spin_unlock_irqrestore(&blitq->blit_lock, irqsave); @@ -712,7 +712,7 @@ via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine) * Hand back a free slot if we changed our mind. */ -static void +static void via_dmablit_release_slot(drm_via_blitq_t *blitq) { unsigned long irqsave; @@ -728,8 +728,8 @@ via_dmablit_release_slot(drm_via_blitq_t *blitq) */ -static int -via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer) +static int +via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer) { drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; drm_via_sg_info_t *vsg; @@ -760,15 +760,15 @@ via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer) spin_lock_irqsave(&blitq->blit_lock, irqsave); blitq->blits[blitq->head++] = vsg; - if (blitq->head >= VIA_NUM_BLIT_SLOTS) + if (blitq->head >= VIA_NUM_BLIT_SLOTS) blitq->head = 0; blitq->num_outstanding++; - xfer->sync.sync_handle = ++blitq->cur_blit_handle; + xfer->sync.sync_handle = ++blitq->cur_blit_handle; spin_unlock_irqrestore(&blitq->blit_lock, irqsave); xfer->sync.engine = engine; - via_dmablit_handler(dev, engine, 0); + via_dmablit_handler(dev, engine, 0); return 0; } @@ -776,7 +776,7 @@ via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer) /* * Sync on a previously submitted blit. Note that the X server use signals extensively, and * that there is a very big probability that this IOCTL will be interrupted by a signal. In that - * case it returns with -EAGAIN for the signal to be delivered. + * case it returns with -EAGAIN for the signal to be delivered. * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock(). */ @@ -786,7 +786,7 @@ via_dma_blit_sync( struct drm_device *dev, void *data, struct drm_file *file_pri drm_via_blitsync_t *sync = data; int err; - if (sync->engine >= VIA_NUM_BLIT_ENGINES) + if (sync->engine >= VIA_NUM_BLIT_ENGINES) return -EINVAL; err = via_dmablit_sync(dev, sync->sync_handle, sync->engine); @@ -796,15 +796,15 @@ via_dma_blit_sync( struct drm_device *dev, void *data, struct drm_file *file_pri return err; } - + /* * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal - * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should + * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should * be reissued. See the above IOCTL code. */ -int +int via_dma_blit( struct drm_device *dev, void *data, struct drm_file *file_priv ) { drm_via_dmablit_t *xfer = data; diff --git a/drivers/char/drm/via_dmablit.h b/drivers/char/drm/via_dmablit.h index 6f6a513d514..7408a547a03 100644 --- a/drivers/char/drm/via_dmablit.h +++ b/drivers/char/drm/via_dmablit.h @@ -1,5 +1,5 @@ /* via_dmablit.h -- PCI DMA BitBlt support for the VIA Unichrome/Pro - * + * * Copyright 2005 Thomas Hellstrom. * All Rights Reserved. * @@ -17,12 +17,12 @@ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE * USE OR OTHER DEALINGS IN THE SOFTWARE. * - * Authors: + * Authors: * Thomas Hellstrom. * Register info from Digeo Inc. */ @@ -67,7 +67,7 @@ typedef struct _drm_via_blitq { unsigned cur; unsigned num_free; unsigned num_outstanding; - unsigned long end; + unsigned long end; int aborting; int is_active; drm_via_sg_info_t *blits[VIA_NUM_BLIT_SLOTS]; @@ -77,46 +77,46 @@ typedef struct _drm_via_blitq { struct work_struct wq; struct timer_list poll_timer; } drm_via_blitq_t; - -/* + +/* * PCI DMA Registers * Channels 2 & 3 don't seem to be implemented in hardware. */ - -#define VIA_PCI_DMA_MAR0 0xE40 /* Memory Address Register of Channel 0 */ -#define VIA_PCI_DMA_DAR0 0xE44 /* Device Address Register of Channel 0 */ -#define VIA_PCI_DMA_BCR0 0xE48 /* Byte Count Register of Channel 0 */ -#define VIA_PCI_DMA_DPR0 0xE4C /* Descriptor Pointer Register of Channel 0 */ - -#define VIA_PCI_DMA_MAR1 0xE50 /* Memory Address Register of Channel 1 */ -#define VIA_PCI_DMA_DAR1 0xE54 /* Device Address Register of Channel 1 */ -#define VIA_PCI_DMA_BCR1 0xE58 /* Byte Count Register of Channel 1 */ -#define VIA_PCI_DMA_DPR1 0xE5C /* Descriptor Pointer Register of Channel 1 */ - -#define VIA_PCI_DMA_MAR2 0xE60 /* Memory Address Register of Channel 2 */ -#define VIA_PCI_DMA_DAR2 0xE64 /* Device Address Register of Channel 2 */ -#define VIA_PCI_DMA_BCR2 0xE68 /* Byte Count Register of Channel 2 */ -#define VIA_PCI_DMA_DPR2 0xE6C /* Descriptor Pointer Register of Channel 2 */ - -#define VIA_PCI_DMA_MAR3 0xE70 /* Memory Address Register of Channel 3 */ -#define VIA_PCI_DMA_DAR3 0xE74 /* Device Address Register of Channel 3 */ -#define VIA_PCI_DMA_BCR3 0xE78 /* Byte Count Register of Channel 3 */ -#define VIA_PCI_DMA_DPR3 0xE7C /* Descriptor Pointer Register of Channel 3 */ - -#define VIA_PCI_DMA_MR0 0xE80 /* Mode Register of Channel 0 */ -#define VIA_PCI_DMA_MR1 0xE84 /* Mode Register of Channel 1 */ -#define VIA_PCI_DMA_MR2 0xE88 /* Mode Register of Channel 2 */ -#define VIA_PCI_DMA_MR3 0xE8C /* Mode Register of Channel 3 */ - -#define VIA_PCI_DMA_CSR0 0xE90 /* Command/Status Register of Channel 0 */ -#define VIA_PCI_DMA_CSR1 0xE94 /* Command/Status Register of Channel 1 */ -#define VIA_PCI_DMA_CSR2 0xE98 /* Command/Status Register of Channel 2 */ -#define VIA_PCI_DMA_CSR3 0xE9C /* Command/Status Register of Channel 3 */ - -#define VIA_PCI_DMA_PTR 0xEA0 /* Priority Type Register */ - -/* Define for DMA engine */ + +#define VIA_PCI_DMA_MAR0 0xE40 /* Memory Address Register of Channel 0 */ +#define VIA_PCI_DMA_DAR0 0xE44 /* Device Address Register of Channel 0 */ +#define VIA_PCI_DMA_BCR0 0xE48 /* Byte Count Register of Channel 0 */ +#define VIA_PCI_DMA_DPR0 0xE4C /* Descriptor Pointer Register of Channel 0 */ + +#define VIA_PCI_DMA_MAR1 0xE50 /* Memory Address Register of Channel 1 */ +#define VIA_PCI_DMA_DAR1 0xE54 /* Device Address Register of Channel 1 */ +#define VIA_PCI_DMA_BCR1 0xE58 /* Byte Count Register of Channel 1 */ +#define VIA_PCI_DMA_DPR1 0xE5C /* Descriptor Pointer Register of Channel 1 */ + +#define VIA_PCI_DMA_MAR2 0xE60 /* Memory Address Register of Channel 2 */ +#define VIA_PCI_DMA_DAR2 0xE64 /* Device Address Register of Channel 2 */ +#define VIA_PCI_DMA_BCR2 0xE68 /* Byte Count Register of Channel 2 */ +#define VIA_PCI_DMA_DPR2 0xE6C /* Descriptor Pointer Register of Channel 2 */ + +#define VIA_PCI_DMA_MAR3 0xE70 /* Memory Address Register of Channel 3 */ +#define VIA_PCI_DMA_DAR3 0xE74 /* Device Address Register of Channel 3 */ +#define VIA_PCI_DMA_BCR3 0xE78 /* Byte Count Register of Channel 3 */ +#define VIA_PCI_DMA_DPR3 0xE7C /* Descriptor Pointer Register of Channel 3 */ + +#define VIA_PCI_DMA_MR0 0xE80 /* Mode Register of Channel 0 */ +#define VIA_PCI_DMA_MR1 0xE84 /* Mode Register of Channel 1 */ +#define VIA_PCI_DMA_MR2 0xE88 /* Mode Register of Channel 2 */ +#define VIA_PCI_DMA_MR3 0xE8C /* Mode Register of Channel 3 */ + +#define VIA_PCI_DMA_CSR0 0xE90 /* Command/Status Register of Channel 0 */ +#define VIA_PCI_DMA_CSR1 0xE94 /* Command/Status Register of Channel 1 */ +#define VIA_PCI_DMA_CSR2 0xE98 /* Command/Status Register of Channel 2 */ +#define VIA_PCI_DMA_CSR3 0xE9C /* Command/Status Register of Channel 3 */ + +#define VIA_PCI_DMA_PTR 0xEA0 /* Priority Type Register */ + +/* Define for DMA engine */ /* DPR */ #define VIA_DMA_DPR_EC (1<<1) /* end of chain */ #define VIA_DMA_DPR_DDIE (1<<2) /* descriptor done interrupt enable */ diff --git a/drivers/char/drm/via_drm.h b/drivers/char/drm/via_drm.h index 8f53c76062e..a3b5c102b06 100644 --- a/drivers/char/drm/via_drm.h +++ b/drivers/char/drm/via_drm.h @@ -35,7 +35,7 @@ #include "via_drmclient.h" #endif -#define VIA_NR_SAREA_CLIPRECTS 8 +#define VIA_NR_SAREA_CLIPRECTS 8 #define VIA_NR_XVMC_PORTS 10 #define VIA_NR_XVMC_LOCKS 5 #define VIA_MAX_CACHELINE_SIZE 64 @@ -259,7 +259,7 @@ typedef struct drm_via_blitsync { typedef struct drm_via_dmablit { uint32_t num_lines; uint32_t line_length; - + uint32_t fb_addr; uint32_t fb_stride; diff --git a/drivers/char/drm/via_drv.c b/drivers/char/drm/via_drv.c index 2d4957ab256..80c01cdfa37 100644 --- a/drivers/char/drm/via_drv.c +++ b/drivers/char/drm/via_drv.c @@ -71,7 +71,7 @@ static struct drm_driver driver = { .name = DRIVER_NAME, .id_table = pciidlist, }, - + .name = DRIVER_NAME, .desc = DRIVER_DESC, .date = DRIVER_DATE, diff --git a/drivers/char/drm/via_irq.c b/drivers/char/drm/via_irq.c index 9c1d52bc92d..c6bb978a110 100644 --- a/drivers/char/drm/via_irq.c +++ b/drivers/char/drm/via_irq.c @@ -169,9 +169,9 @@ int via_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence) unsigned int cur_vblank; int ret = 0; - DRM_DEBUG("viadrv_vblank_wait\n"); + DRM_DEBUG("\n"); if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } @@ -201,24 +201,23 @@ via_driver_irq_wait(struct drm_device * dev, unsigned int irq, int force_sequenc maskarray_t *masks; int real_irq; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); if (!dev_priv) { - DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + DRM_ERROR("called with no initialization\n"); return -EINVAL; } if (irq >= drm_via_irq_num) { - DRM_ERROR("%s Trying to wait on unknown irq %d\n", __FUNCTION__, - irq); + DRM_ERROR("Trying to wait on unknown irq %d\n", irq); return -EINVAL; } real_irq = dev_priv->irq_map[irq]; if (real_irq < 0) { - DRM_ERROR("%s Video IRQ %d not available on this hardware.\n", - __FUNCTION__, irq); + DRM_ERROR("Video IRQ %d not available on this hardware.\n", + irq); return -EINVAL; } @@ -251,7 +250,7 @@ void via_driver_irq_preinstall(struct drm_device * dev) drm_via_irq_t *cur_irq; int i; - DRM_DEBUG("driver_irq_preinstall: dev_priv: %p\n", dev_priv); + DRM_DEBUG("dev_priv: %p\n", dev_priv); if (dev_priv) { cur_irq = dev_priv->via_irqs; @@ -298,7 +297,7 @@ void via_driver_irq_postinstall(struct drm_device * dev) drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; u32 status; - DRM_DEBUG("via_driver_irq_postinstall\n"); + DRM_DEBUG("\n"); if (dev_priv) { status = VIA_READ(VIA_REG_INTERRUPT); VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL @@ -317,7 +316,7 @@ void via_driver_irq_uninstall(struct drm_device * dev) drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; u32 status; - DRM_DEBUG("driver_irq_uninstall)\n"); + DRM_DEBUG("\n"); if (dev_priv) { /* Some more magic, oh for some data sheets ! */ @@ -344,7 +343,7 @@ int via_wait_irq(struct drm_device *dev, void *data, struct drm_file *file_priv) return -EINVAL; if (irqwait->request.irq >= dev_priv->num_irqs) { - DRM_ERROR("%s Trying to wait on unknown irq %d\n", __FUNCTION__, + DRM_ERROR("Trying to wait on unknown irq %d\n", irqwait->request.irq); return -EINVAL; } @@ -362,8 +361,7 @@ int via_wait_irq(struct drm_device *dev, void *data, struct drm_file *file_priv) } if (irqwait->request.type & VIA_IRQ_SIGNAL) { - DRM_ERROR("%s Signals on Via IRQs not implemented yet.\n", - __FUNCTION__); + DRM_ERROR("Signals on Via IRQs not implemented yet.\n"); return -EINVAL; } diff --git a/drivers/char/drm/via_map.c b/drivers/char/drm/via_map.c index 10091507a0d..a967556be01 100644 --- a/drivers/char/drm/via_map.c +++ b/drivers/char/drm/via_map.c @@ -29,7 +29,7 @@ static int via_do_init_map(struct drm_device * dev, drm_via_init_t * init) { drm_via_private_t *dev_priv = dev->dev_private; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); dev_priv->sarea = drm_getsarea(dev); if (!dev_priv->sarea) { @@ -79,7 +79,7 @@ int via_map_init(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_via_init_t *init = data; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); switch (init->func) { case VIA_INIT_MAP: @@ -121,4 +121,3 @@ int via_driver_unload(struct drm_device *dev) return 0; } - diff --git a/drivers/char/drm/via_mm.c b/drivers/char/drm/via_mm.c index 3ffbf864983..e64094916e4 100644 --- a/drivers/char/drm/via_mm.c +++ b/drivers/char/drm/via_mm.c @@ -53,7 +53,7 @@ int via_agp_init(struct drm_device *dev, void *data, struct drm_file *file_priv) dev_priv->agp_offset = agp->offset; mutex_unlock(&dev->struct_mutex); - DRM_DEBUG("offset = %u, size = %u", agp->offset, agp->size); + DRM_DEBUG("offset = %u, size = %u\n", agp->offset, agp->size); return 0; } @@ -77,7 +77,7 @@ int via_fb_init(struct drm_device *dev, void *data, struct drm_file *file_priv) dev_priv->vram_offset = fb->offset; mutex_unlock(&dev->struct_mutex); - DRM_DEBUG("offset = %u, size = %u", fb->offset, fb->size); + DRM_DEBUG("offset = %u, size = %u\n", fb->offset, fb->size); return 0; @@ -113,7 +113,7 @@ void via_lastclose(struct drm_device *dev) dev_priv->vram_initialized = 0; dev_priv->agp_initialized = 0; mutex_unlock(&dev->struct_mutex); -} +} int via_mem_alloc(struct drm_device *dev, void *data, struct drm_file *file_priv) diff --git a/drivers/char/drm/via_video.c b/drivers/char/drm/via_video.c index c15e75b54cb..6ec04ac1245 100644 --- a/drivers/char/drm/via_video.c +++ b/drivers/char/drm/via_video.c @@ -33,7 +33,7 @@ void via_init_futex(drm_via_private_t * dev_priv) { unsigned int i; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); for (i = 0; i < VIA_NR_XVMC_LOCKS; ++i) { DRM_INIT_WAITQUEUE(&(dev_priv->decoder_queue[i])); @@ -73,7 +73,7 @@ int via_decoder_futex(struct drm_device *dev, void *data, struct drm_file *file_ drm_via_sarea_t *sAPriv = dev_priv->sarea_priv; int ret = 0; - DRM_DEBUG("%s\n", __FUNCTION__); + DRM_DEBUG("\n"); if (fx->lock > VIA_NR_XVMC_LOCKS) return -EFAULT; diff --git a/drivers/char/epca.h b/drivers/char/epca.h index a297238cd3b..3c77c02b5d6 100644 --- a/drivers/char/epca.h +++ b/drivers/char/epca.h @@ -77,7 +77,6 @@ static char *board_desc[] = #define ON 1 #define FEPTIMEOUT 200000 -#define SERIAL_TYPE_NORMAL 1 #define SERIAL_TYPE_INFO 3 #define EPCA_EVENT_HANGUP 1 #define EPCA_MAGIC 0x5c6df104L diff --git a/drivers/char/esp.c b/drivers/char/esp.c index 28607763ae6..c01e26d9ee5 100644 --- a/drivers/char/esp.c +++ b/drivers/char/esp.c @@ -111,9 +111,6 @@ static char serial_version[] __initdata = "2.2"; static struct tty_driver *esp_driver; -/* serial subtype definitions */ -#define SERIAL_TYPE_NORMAL 1 - /* * Serial driver configuration section. Here are the various options: * @@ -245,17 +242,6 @@ static void rs_start(struct tty_struct *tty) * ----------------------------------------------------------------------- */ -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver. - */ -static inline void rs_sched_event(struct esp_struct *info, - int event) -{ - info->event |= 1 << event; - schedule_work(&info->tqueue); -} - static DEFINE_SPINLOCK(pio_lock); static inline struct esp_pio_buffer *get_pio_buffer(void) @@ -477,7 +463,8 @@ static inline void transmit_chars_pio(struct esp_struct *info, } if (info->xmit_cnt < WAKEUP_CHARS) { - rs_sched_event(info, ESP_EVENT_WRITE_WAKEUP); + if (info->tty) + tty_wakeup(info->tty); #ifdef SERIAL_DEBUG_INTR printk("THRE..."); @@ -515,7 +502,8 @@ static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes) info->xmit_tail = (info->xmit_tail + dma_bytes) & (ESP_XMIT_SIZE - 1); if (info->xmit_cnt < WAKEUP_CHARS) { - rs_sched_event(info, ESP_EVENT_WRITE_WAKEUP); + if (info->tty) + tty_wakeup(info->tty); #ifdef SERIAL_DEBUG_INTR printk("THRE..."); @@ -607,7 +595,7 @@ static inline void check_modem_status(struct esp_struct *info) #ifdef SERIAL_DEBUG_OPEN printk("scheduling hangup..."); #endif - schedule_work(&info->tqueue_hangup); + tty_hangup(info->tty); } } } @@ -723,41 +711,6 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id) * ------------------------------------------------------------------- */ -static void do_softint(struct work_struct *work) -{ - struct esp_struct *info = - container_of(work, struct esp_struct, tqueue); - struct tty_struct *tty; - - tty = info->tty; - if (!tty) - return; - - if (test_and_clear_bit(ESP_EVENT_WRITE_WAKEUP, &info->event)) { - tty_wakeup(tty); - } -} - -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_serial_hangup() -> tty->hangup() -> esp_hangup() - * - */ -static void do_serial_hangup(struct work_struct *work) -{ - struct esp_struct *info = - container_of(work, struct esp_struct, tqueue_hangup); - struct tty_struct *tty; - - tty = info->tty; - if (tty) - tty_hangup(tty); -} - /* * --------------------------------------------------------------- * Low level utility subroutines for the serial driver: routines to @@ -2041,7 +1994,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp) tty->driver->flush_buffer(tty); tty_ldisc_flush(tty); tty->closing = 0; - info->event = 0; info->tty = NULL; if (info->blocked_open) { @@ -2109,7 +2061,6 @@ static void esp_hangup(struct tty_struct *tty) rs_flush_buffer(tty); shutdown(info); - info->event = 0; info->count = 0; info->flags &= ~ASYNC_NORMAL_ACTIVE; info->tty = NULL; @@ -2495,8 +2446,6 @@ static int __init espserial_init(void) info->magic = ESP_MAGIC; info->close_delay = 5*HZ/10; info->closing_wait = 30*HZ; - INIT_WORK(&info->tqueue, do_softint); - INIT_WORK(&info->tqueue_hangup, do_serial_hangup); info->config.rx_timeout = rx_timeout; info->config.flow_on = flow_on; info->config.flow_off = flow_off; diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 480fae29c9b..44160d5ebca 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -93,7 +93,7 @@ struct hvc_struct { }; /* dynamic list of hvc_struct instances */ -static struct list_head hvc_structs = LIST_HEAD_INIT(hvc_structs); +static LIST_HEAD(hvc_structs); /* * Protect the list of hvc_struct instances from inserts and removals during diff --git a/drivers/char/hvc_rtas.c b/drivers/char/hvc_rtas.c index bb09413d5a2..88590d04004 100644 --- a/drivers/char/hvc_rtas.c +++ b/drivers/char/hvc_rtas.c @@ -76,7 +76,7 @@ static struct hv_ops hvc_rtas_get_put_ops = { .put_chars = hvc_rtas_write_console, }; -static int hvc_rtas_init(void) +static int __init hvc_rtas_init(void) { struct hvc_struct *hp; diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c index 3402def2200..786d518e947 100644 --- a/drivers/char/hvcs.c +++ b/drivers/char/hvcs.c @@ -306,7 +306,7 @@ struct hvcs_struct { /* Required to back map a kref to its containing object */ #define from_kref(k) container_of(k, struct hvcs_struct, kref) -static struct list_head hvcs_structs = LIST_HEAD_INIT(hvcs_structs); +static LIST_HEAD(hvcs_structs); static DEFINE_SPINLOCK(hvcs_structs_lock); static void hvcs_unthrottle(struct tty_struct *tty); diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c index 0118b9817a9..84cdf902573 100644 --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -234,11 +234,11 @@ static DEVICE_ATTR(rng_available, S_IRUGO, NULL); -static void unregister_miscdev(void) +static void unregister_miscdev(bool suspended) { device_remove_file(rng_miscdev.this_device, &dev_attr_rng_available); device_remove_file(rng_miscdev.this_device, &dev_attr_rng_current); - misc_deregister(&rng_miscdev); + __misc_deregister(&rng_miscdev, suspended); } static int register_miscdev(void) @@ -313,7 +313,7 @@ out: } EXPORT_SYMBOL_GPL(hwrng_register); -void hwrng_unregister(struct hwrng *rng) +void __hwrng_unregister(struct hwrng *rng, bool suspended) { int err; @@ -332,11 +332,11 @@ void hwrng_unregister(struct hwrng *rng) } } if (list_empty(&rng_list)) - unregister_miscdev(); + unregister_miscdev(suspended); mutex_unlock(&rng_mutex); } -EXPORT_SYMBOL_GPL(hwrng_unregister); +EXPORT_SYMBOL_GPL(__hwrng_unregister); MODULE_DESCRIPTION("H/W Random Number Generator (RNG) driver"); diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c index 868e39fd42e..f7feae4ebb5 100644 --- a/drivers/char/hw_random/via-rng.c +++ b/drivers/char/hw_random/via-rng.c @@ -42,6 +42,8 @@ enum { VIA_STRFILT_ENABLE = (1 << 14), VIA_RAWBITS_ENABLE = (1 << 13), VIA_RNG_ENABLE = (1 << 6), + VIA_NOISESRC1 = (1 << 8), + VIA_NOISESRC2 = (1 << 9), VIA_XSTORE_CNT_MASK = 0x0F, VIA_RNG_CHUNK_8 = 0x00, /* 64 rand bits, 64 stored bits */ @@ -119,6 +121,7 @@ static int via_rng_data_read(struct hwrng *rng, u32 *data) static int via_rng_init(struct hwrng *rng) { + struct cpuinfo_x86 *c = &cpu_data(0); u32 lo, hi, old_lo; /* Control the RNG via MSR. Tread lightly and pay very close @@ -134,6 +137,17 @@ static int via_rng_init(struct hwrng *rng) lo &= ~VIA_XSTORE_CNT_MASK; lo &= ~(VIA_STRFILT_ENABLE | VIA_STRFILT_FAIL | VIA_RAWBITS_ENABLE); lo |= VIA_RNG_ENABLE; + lo |= VIA_NOISESRC1; + + /* Enable secondary noise source on CPUs where it is present. */ + + /* Nehemiah stepping 8 and higher */ + if ((c->x86_model == 9) && (c->x86_mask > 7)) + lo |= VIA_NOISESRC2; + + /* Esther */ + if (c->x86_model >= 10) + lo |= VIA_NOISESRC2; if (lo != old_lo) wrmsr(MSR_VIA_RNG, lo, hi); diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c index 30e56451642..8609b8236c6 100644 --- a/drivers/char/i8k.c +++ b/drivers/char/i8k.c @@ -113,6 +113,33 @@ static int i8k_smm(struct smm_regs *regs) int rc; int eax = regs->eax; +#if defined(CONFIG_X86_64) + asm("pushq %%rax\n\t" + "movl 0(%%rax),%%edx\n\t" + "pushq %%rdx\n\t" + "movl 4(%%rax),%%ebx\n\t" + "movl 8(%%rax),%%ecx\n\t" + "movl 12(%%rax),%%edx\n\t" + "movl 16(%%rax),%%esi\n\t" + "movl 20(%%rax),%%edi\n\t" + "popq %%rax\n\t" + "out %%al,$0xb2\n\t" + "out %%al,$0x84\n\t" + "xchgq %%rax,(%%rsp)\n\t" + "movl %%ebx,4(%%rax)\n\t" + "movl %%ecx,8(%%rax)\n\t" + "movl %%edx,12(%%rax)\n\t" + "movl %%esi,16(%%rax)\n\t" + "movl %%edi,20(%%rax)\n\t" + "popq %%rdx\n\t" + "movl %%edx,0(%%rax)\n\t" + "lahf\n\t" + "shrl $8,%%eax\n\t" + "andl $1,%%eax\n" + :"=a"(rc) + : "a"(regs) + : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory"); +#else asm("pushl %%eax\n\t" "movl 0(%%eax),%%edx\n\t" "push %%edx\n\t" @@ -137,7 +164,7 @@ static int i8k_smm(struct smm_regs *regs) "andl $1,%%eax\n":"=a"(rc) : "a"(regs) : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory"); - +#endif if (rc != 0 || (regs->eax & 0xffff) == 0xffff || regs->eax == eax) return -EINVAL; @@ -439,6 +466,20 @@ static struct dmi_system_id __initdata i8k_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Latitude"), }, }, + { /* UK Inspiron 6400 */ + .ident = "Dell Inspiron 3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MM061"), + }, + }, + { + .ident = "Dell Inspiron 3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MP061"), + }, + }, { } }; diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index 0f49ccf02a7..b1d6cad8428 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -153,9 +153,6 @@ static char *pcVersion = "1.2.14"; static char *pcDriver_name = "ip2"; static char *pcIpl = "ip2ipl"; -/* Serial subtype definitions */ -#define SERIAL_TYPE_NORMAL 1 - // cheezy kludge or genius - you decide? int ip2_loadmain(int *, int *, unsigned char *, int); static unsigned char *Fip_firmware; diff --git a/drivers/char/ip27-rtc.c b/drivers/char/ip27-rtc.c index 932264a657d..86e6538a77b 100644 --- a/drivers/char/ip27-rtc.c +++ b/drivers/char/ip27-rtc.c @@ -46,8 +46,8 @@ #include <asm/sn/sn0/hub.h> #include <asm/sn/sn_private.h> -static int rtc_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); +static long rtc_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg); static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data); @@ -75,8 +75,7 @@ static unsigned long epoch = 1970; /* year corresponding to 0x00 */ static const unsigned char days_in_mo[] = {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; -static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long rtc_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct rtc_time wtime; @@ -197,7 +196,7 @@ static int rtc_release(struct inode *inode, struct file *file) static const struct file_operations rtc_fops = { .owner = THIS_MODULE, - .ioctl = rtc_ioctl, + .unlocked_ioctl = rtc_ioctl, .open = rtc_open, .release = rtc_release, }; diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 5dc1265ce1d..32b2b22996d 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -365,12 +365,12 @@ static struct device_driver ipmidriver = { }; static DEFINE_MUTEX(ipmidriver_mutex); -static struct list_head ipmi_interfaces = LIST_HEAD_INIT(ipmi_interfaces); +static LIST_HEAD(ipmi_interfaces); static DEFINE_MUTEX(ipmi_interfaces_mutex); /* List of watchers that want to know when smi's are added and deleted. */ -static struct list_head smi_watchers = LIST_HEAD_INIT(smi_watchers); +static LIST_HEAD(smi_watchers); static DEFINE_MUTEX(smi_watchers_mutex); @@ -441,7 +441,7 @@ struct watcher_entry { int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher) { ipmi_smi_t intf; - struct list_head to_deliver = LIST_HEAD_INIT(to_deliver); + LIST_HEAD(to_deliver); struct watcher_entry *e, *e2; mutex_lock(&smi_watchers_mutex); diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 1f27be1ec3d..c645455c3fd 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -627,7 +627,6 @@ static int stli_initopen(struct stlibrd *brdp, struct stliport *portp); static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp); -static void stli_dohangup(struct work_struct *); static int stli_setport(struct stliport *portp); static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); @@ -1824,25 +1823,6 @@ static void stli_start(struct tty_struct *tty) /*****************************************************************************/ /* - * Scheduler called hang up routine. This is called from the scheduler, - * not direct from the driver "poll" routine. We can't call it there - * since the real local hangup code will enable/disable the board and - * other things that we can't do while handling the poll. Much easier - * to deal with it some time later (don't really care when, hangups - * aren't that time critical). - */ - -static void stli_dohangup(struct work_struct *ugly_api) -{ - struct stliport *portp = container_of(ugly_api, struct stliport, tqhangup); - if (portp->tty != NULL) { - tty_hangup(portp->tty); - } -} - -/*****************************************************************************/ - -/* * Hangup this port. This is pretty much like closing the port, only * a little more brutal. No waiting for data to drain. Shutdown the * port and maybe drop signals. This is rather tricky really. We want @@ -2405,7 +2385,7 @@ static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp) ((portp->sigs & TIOCM_CD) == 0)) { if (portp->flags & ASYNC_CHECK_CD) { if (tty) - schedule_work(&portp->tqhangup); + tty_hangup(tty); } } } @@ -2733,7 +2713,6 @@ static int stli_initports(struct stlibrd *brdp) portp->baud_base = STL_BAUDBASE; portp->close_delay = STL_CLOSEDELAY; portp->closing_wait = 30 * HZ; - INIT_WORK(&portp->tqhangup, stli_dohangup); init_waitqueue_head(&portp->open_wait); init_waitqueue_head(&portp->close_wait); init_waitqueue_head(&portp->raw_wait); diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index fc54d234507..4dbd3425e92 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -38,7 +38,6 @@ #include <linux/kbd_kern.h> #include <linux/kbd_diacr.h> #include <linux/vt_kern.h> -#include <linux/consolemap.h> #include <linux/sysrq.h> #include <linux/input.h> #include <linux/reboot.h> @@ -194,7 +193,7 @@ int getkeycode(unsigned int scancode) int error = -ENODEV; list_for_each_entry(handle, &kbd_handler.h_list, h_node) { - error = handle->dev->getkeycode(handle->dev, scancode, &keycode); + error = input_get_keycode(handle->dev, scancode, &keycode); if (!error) return keycode; } @@ -208,7 +207,7 @@ int setkeycode(unsigned int scancode, unsigned int keycode) int error = -ENODEV; list_for_each_entry(handle, &kbd_handler.h_list, h_node) { - error = handle->dev->setkeycode(handle->dev, scancode, keycode); + error = input_set_keycode(handle->dev, scancode, keycode); if (!error) break; } diff --git a/drivers/char/lp.c b/drivers/char/lp.c index 81674d7c56c..60ac642752b 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -312,7 +312,7 @@ static ssize_t lp_write(struct file * file, const char __user * buf, if (copy_size > LP_BUFFER_SIZE) copy_size = LP_BUFFER_SIZE; - if (down_interruptible (&lp_table[minor].port_mutex)) + if (mutex_lock_interruptible(&lp_table[minor].port_mutex)) return -EINTR; if (copy_from_user (kbuf, buf, copy_size)) { @@ -399,7 +399,7 @@ static ssize_t lp_write(struct file * file, const char __user * buf, lp_release_parport (&lp_table[minor]); } out_unlock: - up (&lp_table[minor].port_mutex); + mutex_unlock(&lp_table[minor].port_mutex); return retv; } @@ -421,7 +421,7 @@ static ssize_t lp_read(struct file * file, char __user * buf, if (count > LP_BUFFER_SIZE) count = LP_BUFFER_SIZE; - if (down_interruptible (&lp_table[minor].port_mutex)) + if (mutex_lock_interruptible(&lp_table[minor].port_mutex)) return -EINTR; lp_claim_parport_or_block (&lp_table[minor]); @@ -479,7 +479,7 @@ static ssize_t lp_read(struct file * file, char __user * buf, if (retval > 0 && copy_to_user (buf, kbuf, retval)) retval = -EFAULT; - up (&lp_table[minor].port_mutex); + mutex_unlock(&lp_table[minor].port_mutex); return retval; } @@ -888,7 +888,7 @@ static int __init lp_init (void) lp_table[i].last_error = 0; init_waitqueue_head (&lp_table[i].waitq); init_waitqueue_head (&lp_table[i].dataq); - init_MUTEX (&lp_table[i].port_mutex); + mutex_init(&lp_table[i].port_mutex); lp_table[i].timeout = 10 * HZ; } diff --git a/drivers/char/mbcs.c b/drivers/char/mbcs.c index 3c5802ae171..f4716ad7348 100644 --- a/drivers/char/mbcs.c +++ b/drivers/char/mbcs.c @@ -23,6 +23,7 @@ #include <linux/device.h> #include <linux/mm.h> #include <linux/uio.h> +#include <linux/mutex.h> #include <asm/io.h> #include <asm/uaccess.h> #include <asm/system.h> @@ -281,7 +282,7 @@ static inline int mbcs_algo_start(struct mbcs_soft *soft) void *mmr_base = soft->mmr_base; union cm_control cm_control; - if (down_interruptible(&soft->algolock)) + if (mutex_lock_interruptible(&soft->algolock)) return -ERESTARTSYS; atomic_set(&soft->algo_done, 0); @@ -298,7 +299,7 @@ static inline int mbcs_algo_start(struct mbcs_soft *soft) cm_control.alg_go = 1; MBCS_MMR_SET(mmr_base, MBCS_CM_CONTROL, cm_control.cm_control_reg); - up(&soft->algolock); + mutex_unlock(&soft->algolock); return 0; } @@ -309,7 +310,7 @@ do_mbcs_sram_dmawrite(struct mbcs_soft *soft, uint64_t hostAddr, { int rv = 0; - if (down_interruptible(&soft->dmawritelock)) + if (mutex_lock_interruptible(&soft->dmawritelock)) return -ERESTARTSYS; atomic_set(&soft->dmawrite_done, 0); @@ -335,7 +336,7 @@ do_mbcs_sram_dmawrite(struct mbcs_soft *soft, uint64_t hostAddr, *off += len; dmawrite_exit: - up(&soft->dmawritelock); + mutex_unlock(&soft->dmawritelock); return rv; } @@ -346,7 +347,7 @@ do_mbcs_sram_dmaread(struct mbcs_soft *soft, uint64_t hostAddr, { int rv = 0; - if (down_interruptible(&soft->dmareadlock)) + if (mutex_lock_interruptible(&soft->dmareadlock)) return -ERESTARTSYS; atomic_set(&soft->dmawrite_done, 0); @@ -371,7 +372,7 @@ do_mbcs_sram_dmaread(struct mbcs_soft *soft, uint64_t hostAddr, *off += len; dmaread_exit: - up(&soft->dmareadlock); + mutex_unlock(&soft->dmareadlock); return rv; } @@ -762,9 +763,9 @@ static int mbcs_probe(struct cx_dev *dev, const struct cx_device_id *id) init_waitqueue_head(&soft->dmaread_queue); init_waitqueue_head(&soft->algo_queue); - init_MUTEX(&soft->dmawritelock); - init_MUTEX(&soft->dmareadlock); - init_MUTEX(&soft->algolock); + mutex_init(&soft->dmawritelock); + mutex_init(&soft->dmareadlock); + mutex_init(&soft->algolock); mbcs_getdma_init(&soft->getdma); mbcs_putdma_init(&soft->putdma); diff --git a/drivers/char/mbcs.h b/drivers/char/mbcs.h index c9905a3c335..ba671589f4c 100644 --- a/drivers/char/mbcs.h +++ b/drivers/char/mbcs.h @@ -537,9 +537,9 @@ struct mbcs_soft { atomic_t dmawrite_done; atomic_t dmaread_done; atomic_t algo_done; - struct semaphore dmawritelock; - struct semaphore dmareadlock; - struct semaphore algolock; + struct mutex dmawritelock; + struct mutex dmareadlock; + struct mutex algolock; }; static int mbcs_open(struct inode *ip, struct file *fp); diff --git a/drivers/char/misc.c b/drivers/char/misc.c index 71c8cd7fa15..a39101feb2e 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -232,8 +232,9 @@ int misc_register(struct miscdevice * misc) } /** - * misc_deregister - unregister a miscellaneous device + * __misc_deregister - unregister a miscellaneous device * @misc: device to unregister + * @suspended: to be set if the function is used during suspend/resume * * Unregister a miscellaneous device that was previously * successfully registered with misc_register(). Success @@ -241,7 +242,7 @@ int misc_register(struct miscdevice * misc) * indicates an error. */ -int misc_deregister(struct miscdevice * misc) +int __misc_deregister(struct miscdevice *misc, bool suspended) { int i = misc->minor; @@ -250,7 +251,11 @@ int misc_deregister(struct miscdevice * misc) mutex_lock(&misc_mtx); list_del(&misc->list); - device_destroy(misc_class, MKDEV(MISC_MAJOR, misc->minor)); + if (suspended) + destroy_suspended_device(misc_class, + MKDEV(MISC_MAJOR, misc->minor)); + else + device_destroy(misc_class, MKDEV(MISC_MAJOR, misc->minor)); if (i < DYNAMIC_MINORS && i>0) { misc_minors[i>>3] &= ~(1 << (misc->minor & 7)); } @@ -259,7 +264,7 @@ int misc_deregister(struct miscdevice * misc) } EXPORT_SYMBOL(misc_register); -EXPORT_SYMBOL(misc_deregister); +EXPORT_SYMBOL(__misc_deregister); static int __init misc_init(void) { diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 2fc255a2148..64b7b2b1835 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -207,7 +207,7 @@ static int moxa_tiocmget(struct tty_struct *tty, struct file *file); static int moxa_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static void moxa_poll(unsigned long); -static void moxa_set_tty_param(struct tty_struct *); +static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); static int moxa_block_till_ready(struct tty_struct *, struct file *, struct moxa_port *); static void moxa_setup_empty_event(struct tty_struct *); @@ -500,7 +500,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp) ch->tty = tty; if (!(ch->asyncflags & ASYNC_INITIALIZED)) { ch->statusflags = 0; - moxa_set_tty_param(tty); + moxa_set_tty_param(tty, tty->termios); MoxaPortLineCtrl(ch->port, 1, 1); MoxaPortEnable(ch->port); ch->asyncflags |= ASYNC_INITIALIZED; @@ -803,7 +803,7 @@ static void moxa_set_termios(struct tty_struct *tty, if (ch == NULL) return; - moxa_set_tty_param(tty); + moxa_set_tty_param(tty, old_termios); if (!(old_termios->c_cflag & CLOCAL) && (tty->termios->c_cflag & CLOCAL)) wake_up_interruptible(&ch->open_wait); @@ -903,11 +903,11 @@ static void moxa_poll(unsigned long ignored) /******************************************************************************/ -static void moxa_set_tty_param(struct tty_struct *tty) +static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios) { register struct ktermios *ts; struct moxa_port *ch; - int rts, cts, txflow, rxflow, xany; + int rts, cts, txflow, rxflow, xany, baud; ch = (struct moxa_port *) tty->driver_data; ts = tty->termios; @@ -924,8 +924,15 @@ static void moxa_set_tty_param(struct tty_struct *tty) rxflow = 1; if (ts->c_iflag & IXANY) xany = 1; + + /* Clear the features we don't support */ + ts->c_cflag &= ~CMSPAR; MoxaPortFlowCtrl(ch->port, rts, cts, txflow, rxflow, xany); - MoxaPortSetTermio(ch->port, ts, tty_get_baud_rate(tty)); + baud = MoxaPortSetTermio(ch->port, ts, tty_get_baud_rate(tty)); + if (baud == -1) + baud = tty_termios_baud_rate(old_termios); + /* Not put the baud rate into the termios data */ + tty_encode_baud_rate(tty, baud, baud); } static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, @@ -2065,7 +2072,7 @@ int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud) if (baud >= 921600L) return (-1); } - MoxaPortSetBaud(port, baud); + baud = MoxaPortSetBaud(port, baud); if (termio->c_iflag & (IXON | IXOFF | IXANY)) { writeb(termio->c_cc[VSTART], ofsAddr + FuncArg); @@ -2074,7 +2081,7 @@ int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud) moxa_wait_finish(ofsAddr); } - return (0); + return (baud); } int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState) diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index fd0abef7ee0..68c2e923469 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1,43 +1,25 @@ /* * mxser.c -- MOXA Smartio/Industio family multiport serial driver. * - * Copyright (C) 1999-2001 Moxa Technologies (support@moxa.com.tw). + * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com). + * Copyright (C) 2006-2008 Jiri Slaby <jirislaby@gmail.com> * - * This code is loosely based on the Linux serial driver, written by - * Linus Torvalds, Theodore T'so and others. + * This code is loosely based on the 1.8 moxa driver which is based on + * Linux serial driver, written by Linus Torvalds, Theodore T'so and + * others. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Original release 10/26/00 - * - * 02/06/01 Support MOXA Industio family boards. - * 02/06/01 Support TIOCGICOUNT. - * 02/06/01 Fix the problem for connecting to serial mouse. - * 02/06/01 Fix the problem for H/W flow control. - * 02/06/01 Fix the compling warning when CONFIG_PCI - * don't be defined. - * * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com. * - Fixed x86_64 cleanness * - Fixed sleep with spinlock held in mxser_send_break */ - #include <linux/module.h> -#include <linux/autoconf.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> @@ -65,33 +47,37 @@ #include "mxser.h" -#define MXSER_VERSION "1.8" +#define MXSER_VERSION "2.0.3" /* 1.11 */ #define MXSERMAJOR 174 #define MXSERCUMAJOR 175 -#define MXSER_EVENT_TXLOW 1 -#define MXSER_EVENT_HANGUP 2 - #define MXSER_BOARDS 4 /* Max. boards */ -#define MXSER_PORTS 32 /* Max. ports */ #define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ -#define MXSER_ISR_PASS_LIMIT 256 +#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) +#define MXSER_ISR_PASS_LIMIT 100 #define MXSER_ERR_IOADDR -1 #define MXSER_ERR_IRQ -2 #define MXSER_ERR_IRQ_CONFLIT -3 #define MXSER_ERR_VECTOR -4 -#define SERIAL_TYPE_NORMAL 1 -#define SERIAL_TYPE_CALLOUT 2 +/*CheckIsMoxaMust return value*/ +#define MOXA_OTHER_UART 0x00 +#define MOXA_MUST_MU150_HWID 0x01 +#define MOXA_MUST_MU860_HWID 0x02 #define WAKEUP_CHARS 256 #define UART_MCR_AFE 0x20 #define UART_LSR_SPECIAL 0x1E +#define PCI_DEVICE_ID_CB108 0x1080 +#define PCI_DEVICE_ID_CB114 0x1142 +#define PCI_DEVICE_ID_CP114UL 0x1143 +#define PCI_DEVICE_ID_CB134I 0x1341 +#define PCI_DEVICE_ID_CP138U 0x1380 +#define PCI_DEVICE_ID_POS104UL 0x1044 -#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED : IRQF_DISABLED) #define C168_ASIC_ID 1 #define C104_ASIC_ID 2 @@ -100,88 +86,11 @@ #define CI134_ASIC_ID 3 #define CI104J_ASIC_ID 5 -enum { - MXSER_BOARD_C168_ISA = 1, - MXSER_BOARD_C104_ISA, - MXSER_BOARD_CI104J, - MXSER_BOARD_C168_PCI, - MXSER_BOARD_C104_PCI, - MXSER_BOARD_C102_ISA, - MXSER_BOARD_CI132, - MXSER_BOARD_CI134, - MXSER_BOARD_CP132, - MXSER_BOARD_CP114, - MXSER_BOARD_CT114, - MXSER_BOARD_CP102, - MXSER_BOARD_CP104U, - MXSER_BOARD_CP168U, - MXSER_BOARD_CP132U, - MXSER_BOARD_CP134U, - MXSER_BOARD_CP104JU, - MXSER_BOARD_RC7000, - MXSER_BOARD_CP118U, - MXSER_BOARD_CP102UL, - MXSER_BOARD_CP102U, -}; - -static char *mxser_brdname[] = { - "C168 series", - "C104 series", - "CI-104J series", - "C168H/PCI series", - "C104H/PCI series", - "C102 series", - "CI-132 series", - "CI-134 series", - "CP-132 series", - "CP-114 series", - "CT-114 series", - "CP-102 series", - "CP-104U series", - "CP-168U series", - "CP-132U series", - "CP-134U series", - "CP-104JU series", - "Moxa UC7000 Serial", - "CP-118U series", - "CP-102UL series", - "CP-102U series", -}; - -static int mxser_numports[] = { - 8, /* C168-ISA */ - 4, /* C104-ISA */ - 4, /* CI104J */ - 8, /* C168-PCI */ - 4, /* C104-PCI */ - 2, /* C102-ISA */ - 2, /* CI132 */ - 4, /* CI134 */ - 2, /* CP132 */ - 4, /* CP114 */ - 4, /* CT114 */ - 2, /* CP102 */ - 4, /* CP104U */ - 8, /* CP168U */ - 2, /* CP132U */ - 4, /* CP134U */ - 4, /* CP104JU */ - 8, /* RC7000 */ - 8, /* CP118U */ - 2, /* CP102UL */ - 2, /* CP102U */ -}; - -#define UART_TYPE_NUM 2 - -static const unsigned int Gmoxa_uart_id[UART_TYPE_NUM] = { - MOXA_MUST_MU150_HWID, - MOXA_MUST_MU860_HWID -}; +#define MXSER_HIGHBAUD 1 +#define MXSER_HAS2 2 /* This is only for PCI */ -#define UART_INFO_NUM 3 -struct mxpciuart_info { +static const struct { int type; int tx_fifo; int rx_fifo; @@ -190,51 +99,85 @@ struct mxpciuart_info { int rx_trigger; int rx_low_water; long max_baud; -}; - -static const struct mxpciuart_info Gpci_uart_info[UART_INFO_NUM] = { +} Gpci_uart_info[] = { {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} }; +#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info) +struct mxser_cardinfo { + char *name; + unsigned int nports; + unsigned int flags; +}; -#ifdef CONFIG_PCI +static const struct mxser_cardinfo mxser_cards[] = { +/* 0*/ { "C168 series", 8, }, + { "C104 series", 4, }, + { "CI-104J series", 4, }, + { "C168H/PCI series", 8, }, + { "C104H/PCI series", 4, }, +/* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */ + { "CI-132 series", 4, MXSER_HAS2 }, + { "CI-134 series", 4, }, + { "CP-132 series", 2, }, + { "CP-114 series", 4, }, +/*10*/ { "CT-114 series", 4, }, + { "CP-102 series", 2, MXSER_HIGHBAUD }, + { "CP-104U series", 4, }, + { "CP-168U series", 8, }, + { "CP-132U series", 2, }, +/*15*/ { "CP-134U series", 4, }, + { "CP-104JU series", 4, }, + { "Moxa UC7000 Serial", 8, }, /* RC7000 */ + { "CP-118U series", 8, }, + { "CP-102UL series", 2, }, +/*20*/ { "CP-102U series", 2, }, + { "CP-118EL series", 8, }, + { "CP-168EL series", 8, }, + { "CP-104EL series", 4, }, + { "CB-108 series", 8, }, +/*25*/ { "CB-114 series", 4, }, + { "CB-134I series", 4, }, + { "CP-138U series", 8, }, + { "POS-104UL series", 4, }, + { "CP-114UL series", 4, } +}; +/* driver_data correspond to the lines in the structure above + see also ISA probe function before you change something */ static struct pci_device_id mxser_pcibrds[] = { - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C168, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C168_PCI}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C104_PCI}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP114}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CT114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CT114}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP168U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP134U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104JU, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104JU}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_RC7000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_RC7000}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP118U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102UL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102UL}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102U}, - {0} + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 }, + { } }; - MODULE_DEVICE_TABLE(pci, mxser_pcibrds); - -#endif - -typedef struct _moxa_pci_info { - unsigned short busNum; - unsigned short devNum; - struct pci_dev *pdev; /* add by Victor Yu. 06-23-2003 */ -} moxa_pci_info; - static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 }; static int ttymajor = MXSERMAJOR; -static int calloutmajor = MXSERCUMAJOR; -static int verbose = 0; /* Variables for insmod */ @@ -242,8 +185,6 @@ MODULE_AUTHOR("Casper Yang"); MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); module_param_array(ioaddr, int, NULL, 0); module_param(ttymajor, int, 0); -module_param(calloutmajor, int, 0); -module_param(verbose, bool, 0); MODULE_LICENSE("GPL"); struct mxser_log { @@ -278,67 +219,69 @@ struct mxser_mon_ext { int iftype[32]; }; -struct mxser_hwconf { - int board_type; - int ports; - int irq; - int vector; - int vector_mask; - int uart_type; - int ioaddr[MXSER_PORTS_PER_BOARD]; - int baud_base[MXSER_PORTS_PER_BOARD]; - moxa_pci_info pciInfo; - int IsMoxaMustChipFlag; /* add by Victor Yu. 08-30-2002 */ - int MaxCanSetBaudRate[MXSER_PORTS_PER_BOARD]; /* add by Victor Yu. 09-04-2002 */ - int opmode_ioaddr[MXSER_PORTS_PER_BOARD]; /* add by Victor Yu. 01-05-2004 */ -}; +struct mxser_board; + +struct mxser_port { + struct mxser_board *board; + struct tty_struct *tty; + + unsigned long ioaddr; + unsigned long opmode_ioaddr; + int max_baud; -struct mxser_struct { - int port; - int base; /* port base address */ - int irq; /* port using irq no. */ - int vector; /* port irq vector */ - int vectormask; /* port vector mask */ int rx_high_water; int rx_trigger; /* Rx fifo trigger level */ int rx_low_water; int baud_base; /* max. speed */ - int flags; /* defined in tty.h */ int type; /* UART type */ - struct tty_struct *tty; - int read_status_mask; - int ignore_status_mask; - int xmit_fifo_size; - int custom_divisor; + int flags; /* defined in tty.h */ + int x_char; /* xon/xoff character */ - int close_delay; - unsigned short closing_wait; int IER; /* Interrupt Enable Register */ int MCR; /* Modem control register */ + + unsigned char stop_rx; + unsigned char ldisc_stop_rx; + + int custom_divisor; + int close_delay; + unsigned short closing_wait; + unsigned char err_shadow; unsigned long event; + int count; /* # of fd on device */ int blocked_open; /* # of blocked opens */ + struct async_icount icount; /* kernel counters for 4 input interrupts */ + int timeout; + + int read_status_mask; + int ignore_status_mask; + int xmit_fifo_size; unsigned char *xmit_buf; int xmit_head; int xmit_tail; int xmit_cnt; - struct work_struct tqueue; + struct ktermios normal_termios; - struct ktermios callout_termios; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - wait_queue_head_t delta_msr_wait; - struct async_icount icount; /* kernel counters for the 4 input interrupts */ - int timeout; - int IsMoxaMustChipFlag; /* add by Victor Yu. 08-30-2002 */ - int MaxCanSetBaudRate; /* add by Victor Yu. 09-04-2002 */ - int opmode_ioaddr; /* add by Victor Yu. 01-05-2004 */ - unsigned char stop_rx; - unsigned char ldisc_stop_rx; - long realbaud; + struct mxser_mon mon_data; - unsigned char err_shadow; + spinlock_t slock; + wait_queue_head_t open_wait; + wait_queue_head_t delta_msr_wait; +}; + +struct mxser_board { + unsigned int idx; + int irq; + const struct mxser_cardinfo *info; + unsigned long vector; + unsigned long vector_mask; + + int chip_flag; + int uart_type; + + struct mxser_port ports[MXSER_PORTS_PER_BOARD]; }; struct mxser_mstatus { @@ -356,73 +299,16 @@ static int mxserBoardCAP[MXSER_BOARDS] = { /* 0x180, 0x280, 0x200, 0x320 */ }; +static struct mxser_board mxser_boards[MXSER_BOARDS]; static struct tty_driver *mxvar_sdriver; -static struct mxser_struct mxvar_table[MXSER_PORTS]; -static struct tty_struct *mxvar_tty[MXSER_PORTS + 1]; -static struct ktermios *mxvar_termios[MXSER_PORTS + 1]; -static struct ktermios *mxvar_termios_locked[MXSER_PORTS + 1]; static struct mxser_log mxvar_log; static int mxvar_diagflag; static unsigned char mxser_msr[MXSER_PORTS + 1]; static struct mxser_mon_ext mon_data_ext; static int mxser_set_baud_method[MXSER_PORTS + 1]; -static spinlock_t gm_lock; - -/* - * This is used to figure out the divisor speeds and the timeouts - */ - -static struct mxser_hwconf mxsercfg[MXSER_BOARDS]; - -/* - * static functions: - */ - -static void mxser_getcfg(int board, struct mxser_hwconf *hwconf); -static int mxser_init(void); - -/* static void mxser_poll(unsigned long); */ -static int mxser_get_ISA_conf(int, struct mxser_hwconf *); -static void mxser_do_softint(struct work_struct *); -static int mxser_open(struct tty_struct *, struct file *); -static void mxser_close(struct tty_struct *, struct file *); -static int mxser_write(struct tty_struct *, const unsigned char *, int); -static int mxser_write_room(struct tty_struct *); -static void mxser_flush_buffer(struct tty_struct *); -static int mxser_chars_in_buffer(struct tty_struct *); -static void mxser_flush_chars(struct tty_struct *); -static void mxser_put_char(struct tty_struct *, unsigned char); -static int mxser_ioctl(struct tty_struct *, struct file *, uint, ulong); -static int mxser_ioctl_special(unsigned int, void __user *); -static void mxser_throttle(struct tty_struct *); -static void mxser_unthrottle(struct tty_struct *); -static void mxser_set_termios(struct tty_struct *, struct ktermios *); -static void mxser_stop(struct tty_struct *); -static void mxser_start(struct tty_struct *); -static void mxser_hangup(struct tty_struct *); -static void mxser_rs_break(struct tty_struct *, int); -static irqreturn_t mxser_interrupt(int, void *); -static void mxser_receive_chars(struct mxser_struct *, int *); -static void mxser_transmit_chars(struct mxser_struct *); -static void mxser_check_modem_status(struct mxser_struct *, int); -static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *); -static int mxser_startup(struct mxser_struct *); -static void mxser_shutdown(struct mxser_struct *); -static int mxser_change_speed(struct mxser_struct *, struct ktermios *old_termios); -static int mxser_get_serial_info(struct mxser_struct *, struct serial_struct __user *); -static int mxser_set_serial_info(struct mxser_struct *, struct serial_struct __user *); -static int mxser_get_lsr_info(struct mxser_struct *, unsigned int __user *); -static void mxser_send_break(struct mxser_struct *, int); -static int mxser_tiocmget(struct tty_struct *, struct file *); -static int mxser_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int); -static int mxser_set_baud(struct mxser_struct *info, long newspd); -static void mxser_wait_until_sent(struct tty_struct *tty, int timeout); - -static void mxser_startrx(struct tty_struct *tty); -static void mxser_stoprx(struct tty_struct *tty); #ifdef CONFIG_PCI -static int CheckIsMoxaMust(int io) +static int __devinit CheckIsMoxaMust(unsigned long io) { u8 oldmcr, hwid; int i; @@ -438,90 +324,15 @@ static int CheckIsMoxaMust(int io) } GET_MOXA_MUST_HARDWARE_ID(io, &hwid); - for (i = 0; i < UART_TYPE_NUM; i++) { - if (hwid == Gmoxa_uart_id[i]) + for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */ + if (hwid == Gpci_uart_info[i].type) return (int)hwid; } return MOXA_OTHER_UART; } #endif -/* above is modified by Victor Yu. 08-15-2002 */ - -static const struct tty_operations mxser_ops = { - .open = mxser_open, - .close = mxser_close, - .write = mxser_write, - .put_char = mxser_put_char, - .flush_chars = mxser_flush_chars, - .write_room = mxser_write_room, - .chars_in_buffer = mxser_chars_in_buffer, - .flush_buffer = mxser_flush_buffer, - .ioctl = mxser_ioctl, - .throttle = mxser_throttle, - .unthrottle = mxser_unthrottle, - .set_termios = mxser_set_termios, - .stop = mxser_stop, - .start = mxser_start, - .hangup = mxser_hangup, - .break_ctl = mxser_rs_break, - .wait_until_sent = mxser_wait_until_sent, - .tiocmget = mxser_tiocmget, - .tiocmset = mxser_tiocmset, -}; - -/* - * The MOXA Smartio/Industio serial driver boot-time initialization code! - */ - -static int __init mxser_module_init(void) -{ - int ret; - - if (verbose) - printk(KERN_DEBUG "Loading module mxser ...\n"); - ret = mxser_init(); - if (verbose) - printk(KERN_DEBUG "Done.\n"); - return ret; -} - -static void __exit mxser_module_exit(void) -{ - int i, err; - - if (verbose) - printk(KERN_DEBUG "Unloading module mxser ...\n"); - - err = tty_unregister_driver(mxvar_sdriver); - if (!err) - put_tty_driver(mxvar_sdriver); - else - printk(KERN_ERR "Couldn't unregister MOXA Smartio/Industio family serial driver\n"); - - for (i = 0; i < MXSER_BOARDS; i++) { - struct pci_dev *pdev; - - if (mxsercfg[i].board_type == -1) - continue; - else { - pdev = mxsercfg[i].pciInfo.pdev; - free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]); - if (pdev != NULL) { /* PCI */ - release_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2)); - release_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3)); - pci_dev_put(pdev); - } else { - release_region(mxsercfg[i].ioaddr[0], 8 * mxsercfg[i].ports); - release_region(mxsercfg[i].vector, 1); - } - } - } - if (verbose) - printk(KERN_DEBUG "Done.\n"); -} - -static void process_txrx_fifo(struct mxser_struct *info) +static void process_txrx_fifo(struct mxser_port *info) { int i; @@ -530,424 +341,548 @@ static void process_txrx_fifo(struct mxser_struct *info) info->rx_high_water = 1; info->rx_low_water = 1; info->xmit_fifo_size = 1; - } else { - for (i = 0; i < UART_INFO_NUM; i++) { - if (info->IsMoxaMustChipFlag == Gpci_uart_info[i].type) { + } else + for (i = 0; i < UART_INFO_NUM; i++) + if (info->board->chip_flag == Gpci_uart_info[i].type) { info->rx_trigger = Gpci_uart_info[i].rx_trigger; info->rx_low_water = Gpci_uart_info[i].rx_low_water; info->rx_high_water = Gpci_uart_info[i].rx_high_water; info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; break; } - } - } } -static int mxser_initbrd(int board, struct mxser_hwconf *hwconf) +static unsigned char mxser_get_msr(int baseaddr, int mode, int port) { - struct mxser_struct *info; - int retval; - int i, n; + unsigned char status = 0; - n = board * MXSER_PORTS_PER_BOARD; - info = &mxvar_table[n]; - /*if (verbose) */ { - printk(KERN_DEBUG " ttyMI%d - ttyMI%d ", - n, n + hwconf->ports - 1); - printk(" max. baud rate = %d bps.\n", - hwconf->MaxCanSetBaudRate[0]); - } - - for (i = 0; i < hwconf->ports; i++, n++, info++) { - info->port = n; - info->base = hwconf->ioaddr[i]; - info->irq = hwconf->irq; - info->vector = hwconf->vector; - info->vectormask = hwconf->vector_mask; - info->opmode_ioaddr = hwconf->opmode_ioaddr[i]; /* add by Victor Yu. 01-05-2004 */ - info->stop_rx = 0; - info->ldisc_stop_rx = 0; + status = inb(baseaddr + UART_MSR); - info->IsMoxaMustChipFlag = hwconf->IsMoxaMustChipFlag; - /* Enhance mode enabled here */ - if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) { - ENABLE_MOXA_MUST_ENCHANCE_MODE(info->base); - } + mxser_msr[port] &= 0x0F; + mxser_msr[port] |= status; + status = mxser_msr[port]; + if (mode) + mxser_msr[port] = 0; - info->flags = ASYNC_SHARE_IRQ; - info->type = hwconf->uart_type; - info->baud_base = hwconf->baud_base[i]; + return status; +} - info->MaxCanSetBaudRate = hwconf->MaxCanSetBaudRate[i]; +static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, + struct mxser_port *port) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0; + unsigned long flags; - process_txrx_fifo(info); + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + test_bit(TTY_IO_ERROR, &tty->flags)) { + port->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; - info->custom_divisor = hwconf->baud_base[i] * 16; - info->close_delay = 5 * HZ / 10; - info->closing_wait = 30 * HZ; - INIT_WORK(&info->tqueue, mxser_do_softint); - info->normal_termios = mxvar_sdriver->init_termios; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->delta_msr_wait); - memset(&info->mon_data, 0, sizeof(struct mxser_mon)); - info->err_shadow = 0; - spin_lock_init(&info->slock); - } /* - * Allocate the IRQ if necessary + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, port->count is dropped by one, so that + * mxser_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. */ + retval = 0; + add_wait_queue(&port->open_wait, &wait); - - /* before set INT ISR, disable all int */ - for (i = 0; i < hwconf->ports; i++) { - outb(inb(hwconf->ioaddr[i] + UART_IER) & 0xf0, - hwconf->ioaddr[i] + UART_IER); + spin_lock_irqsave(&port->slock, flags); + if (!tty_hung_up_p(filp)) + port->count--; + spin_unlock_irqrestore(&port->slock, flags); + port->blocked_open++; + while (1) { + spin_lock_irqsave(&port->slock, flags); + outb(inb(port->ioaddr + UART_MCR) | + UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR); + spin_unlock_irqrestore(&port->slock, flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { + if (port->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; + break; + } + if (!(port->flags & ASYNC_CLOSING) && + (do_clocal || + (inb(port->ioaddr + UART_MSR) & UART_MSR_DCD))) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + schedule(); } - - n = board * MXSER_PORTS_PER_BOARD; - info = &mxvar_table[n]; - - retval = request_irq(hwconf->irq, mxser_interrupt, IRQ_T(info), - "mxser", info); - if (retval) { - printk(KERN_ERR "Board %d: %s", - board, mxser_brdname[hwconf->board_type - 1]); - printk(" Request irq failed, IRQ (%d) may conflict with" - " another device.\n", info->irq); + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + if (!tty_hung_up_p(filp)) + port->count++; + port->blocked_open--; + if (retval) return retval; - } + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } -static void mxser_getcfg(int board, struct mxser_hwconf *hwconf) +static int mxser_set_baud(struct mxser_port *info, long newspd) { - mxsercfg[board] = *hwconf; -} + int quot = 0, baud; + unsigned char cval; -#ifdef CONFIG_PCI -static int mxser_get_PCI_conf(int busnum, int devnum, int board_type, struct mxser_hwconf *hwconf) -{ - int i, j; - /* unsigned int val; */ - unsigned int ioaddress; - struct pci_dev *pdev = hwconf->pciInfo.pdev; + if (!info->tty || !info->tty->termios) + return -1; - /* io address */ - hwconf->board_type = board_type; - hwconf->ports = mxser_numports[board_type - 1]; - ioaddress = pci_resource_start(pdev, 2); - request_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2), - "mxser(IO)"); + if (!(info->ioaddr)) + return -1; - for (i = 0; i < hwconf->ports; i++) - hwconf->ioaddr[i] = ioaddress + 8 * i; + if (newspd > info->max_baud) + return -1; - /* vector */ - ioaddress = pci_resource_start(pdev, 3); - request_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3), - "mxser(vector)"); - hwconf->vector = ioaddress; + if (newspd == 134) { + quot = 2 * info->baud_base / 269; + tty_encode_baud_rate(info->tty, 134, 134); + } else if (newspd) { + quot = info->baud_base / newspd; + if (quot == 0) + quot = 1; + baud = info->baud_base/quot; + tty_encode_baud_rate(info->tty, baud, baud); + } else { + quot = 0; + } - /* irq */ - hwconf->irq = hwconf->pciInfo.pdev->irq; + info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); + info->timeout += HZ / 50; /* Add .02 seconds of slop */ - hwconf->IsMoxaMustChipFlag = CheckIsMoxaMust(hwconf->ioaddr[0]); - hwconf->uart_type = PORT_16550A; - hwconf->vector_mask = 0; + if (quot) { + info->MCR |= UART_MCR_DTR; + outb(info->MCR, info->ioaddr + UART_MCR); + } else { + info->MCR &= ~UART_MCR_DTR; + outb(info->MCR, info->ioaddr + UART_MCR); + return 0; + } + cval = inb(info->ioaddr + UART_LCR); - for (i = 0; i < hwconf->ports; i++) { - for (j = 0; j < UART_INFO_NUM; j++) { - if (Gpci_uart_info[j].type == hwconf->IsMoxaMustChipFlag) { - hwconf->MaxCanSetBaudRate[i] = Gpci_uart_info[j].max_baud; + outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */ - /* exception....CP-102 */ - if (board_type == MXSER_BOARD_CP102) - hwconf->MaxCanSetBaudRate[i] = 921600; - break; - } - } - } + outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */ + outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ + outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ - if (hwconf->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID) { - for (i = 0; i < hwconf->ports; i++) { - if (i < 4) - hwconf->opmode_ioaddr[i] = ioaddress + 4; - else - hwconf->opmode_ioaddr[i] = ioaddress + 0x0c; - } - outb(0, ioaddress + 4); /* default set to RS232 mode */ - outb(0, ioaddress + 0x0c); /* default set to RS232 mode */ - } +#ifdef BOTHER + if (C_BAUD(info->tty) == BOTHER) { + quot = info->baud_base % newspd; + quot *= 8; + if (quot % newspd > newspd / 2) { + quot /= newspd; + quot++; + } else + quot /= newspd; + + SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, quot); + } else +#endif + SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, 0); - for (i = 0; i < hwconf->ports; i++) { - hwconf->vector_mask |= (1 << i); - hwconf->baud_base[i] = 921600; - } return 0; } -#endif -static int mxser_init(void) +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static int mxser_change_speed(struct mxser_port *info, + struct ktermios *old_termios) { - int i, m, retval, b, n; - struct pci_dev *pdev = NULL; - int index; - unsigned char busnum, devnum; - struct mxser_hwconf hwconf; - - mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); - if (!mxvar_sdriver) - return -ENOMEM; - spin_lock_init(&gm_lock); - - for (i = 0; i < MXSER_BOARDS; i++) { - mxsercfg[i].board_type = -1; - } + unsigned cflag, cval, fcr; + int ret = 0; + unsigned char status; - printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", - MXSER_VERSION); + if (!info->tty || !info->tty->termios) + return ret; + cflag = info->tty->termios->c_cflag; + if (!(info->ioaddr)) + return ret; - /* Initialize the tty_driver structure */ - memset(mxvar_sdriver, 0, sizeof(struct tty_driver)); - mxvar_sdriver->owner = THIS_MODULE; - mxvar_sdriver->magic = TTY_DRIVER_MAGIC; - mxvar_sdriver->name = "ttyMI"; - mxvar_sdriver->major = ttymajor; - mxvar_sdriver->minor_start = 0; - mxvar_sdriver->num = MXSER_PORTS + 1; - mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; - mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; - mxvar_sdriver->init_termios = tty_std_termios; - mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; - mxvar_sdriver->init_termios.c_ispeed = 9600; - mxvar_sdriver->init_termios.c_ospeed = 9600; - mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(mxvar_sdriver, &mxser_ops); - mxvar_sdriver->ttys = mxvar_tty; - mxvar_sdriver->termios = mxvar_termios; - mxvar_sdriver->termios_locked = mxvar_termios_locked; + if (mxser_set_baud_method[info->tty->index] == 0) + mxser_set_baud(info, tty_get_baud_rate(info->tty)); - mxvar_diagflag = 0; - memset(mxvar_table, 0, MXSER_PORTS * sizeof(struct mxser_struct)); - memset(&mxvar_log, 0, sizeof(struct mxser_log)); + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + case CS8: + cval = 0x03; + break; + default: + cval = 0x00; + break; /* too keep GCC shut... */ + } + if (cflag & CSTOPB) + cval |= 0x04; + if (cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; - memset(&mxser_msr, 0, sizeof(unsigned char) * (MXSER_PORTS + 1)); - memset(&mon_data_ext, 0, sizeof(struct mxser_mon_ext)); - memset(&mxser_set_baud_method, 0, sizeof(int) * (MXSER_PORTS + 1)); - memset(&hwconf, 0, sizeof(struct mxser_hwconf)); + if ((info->type == PORT_8250) || (info->type == PORT_16450)) { + if (info->board->chip_flag) { + fcr = UART_FCR_ENABLE_FIFO; + fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; + SET_MOXA_MUST_FIFO_VALUE(info); + } else + fcr = 0; + } else { + fcr = UART_FCR_ENABLE_FIFO; + if (info->board->chip_flag) { + fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; + SET_MOXA_MUST_FIFO_VALUE(info); + } else { + switch (info->rx_trigger) { + case 1: + fcr |= UART_FCR_TRIGGER_1; + break; + case 4: + fcr |= UART_FCR_TRIGGER_4; + break; + case 8: + fcr |= UART_FCR_TRIGGER_8; + break; + default: + fcr |= UART_FCR_TRIGGER_14; + break; + } + } + } - m = 0; - /* Start finding ISA boards here */ - for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { - int cap; - - if (!(cap = mxserBoardCAP[b])) - continue; - - retval = mxser_get_ISA_conf(cap, &hwconf); - - if (retval != 0) - printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", - mxser_brdname[hwconf.board_type - 1], ioaddr[b]); - - if (retval <= 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR "Invalid interrupt number, " - "board not configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR "Invalid interrupt number, " - "board not configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR "Invalid interrupt vector, " - "board not configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR "Invalid I/O address, " - "board not configured\n"); - - continue; + /* CTS flow control flag and modem status interrupts */ + info->IER &= ~UART_IER_MSI; + info->MCR &= ~UART_MCR_AFE; + if (cflag & CRTSCTS) { + info->flags |= ASYNC_CTS_FLOW; + info->IER |= UART_IER_MSI; + if ((info->type == PORT_16550A) || (info->board->chip_flag)) { + info->MCR |= UART_MCR_AFE; + } else { + status = inb(info->ioaddr + UART_MSR); + if (info->tty->hw_stopped) { + if (status & UART_MSR_CTS) { + info->tty->hw_stopped = 0; + if (info->type != PORT_16550A && + !info->board->chip_flag) { + outb(info->IER & ~UART_IER_THRI, + info->ioaddr + + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + + UART_IER); + } + tty_wakeup(info->tty); + } + } else { + if (!(status & UART_MSR_CTS)) { + info->tty->hw_stopped = 1; + if ((info->type != PORT_16550A) && + (!info->board->chip_flag)) { + info->IER &= ~UART_IER_THRI; + outb(info->IER, info->ioaddr + + UART_IER); + } + } + } } + } else { + info->flags &= ~ASYNC_CTS_FLOW; + } + outb(info->MCR, info->ioaddr + UART_MCR); + if (cflag & CLOCAL) { + info->flags &= ~ASYNC_CHECK_CD; + } else { + info->flags |= ASYNC_CHECK_CD; + info->IER |= UART_IER_MSI; + } + outb(info->IER, info->ioaddr + UART_IER); - hwconf.pciInfo.busNum = 0; - hwconf.pciInfo.devNum = 0; - hwconf.pciInfo.pdev = NULL; + /* + * Set up parity check flag + */ + info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (I_INPCK(info->tty)) + info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) + info->read_status_mask |= UART_LSR_BI; + + info->ignore_status_mask = 0; - mxser_getcfg(m, &hwconf); + if (I_IGNBRK(info->tty)) { + info->ignore_status_mask |= UART_LSR_BI; + info->read_status_mask |= UART_LSR_BI; /* - * init mxsercfg first, - * or mxsercfg data is not correct on ISR. + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). */ - /* mxser_initbrd will hook ISR. */ - if (mxser_initbrd(m, &hwconf) < 0) - continue; - - m++; + if (I_IGNPAR(info->tty)) { + info->ignore_status_mask |= + UART_LSR_OE | + UART_LSR_PE | + UART_LSR_FE; + info->read_status_mask |= + UART_LSR_OE | + UART_LSR_PE | + UART_LSR_FE; + } + } + if (info->board->chip_flag) { + SET_MOXA_MUST_XON1_VALUE(info->ioaddr, START_CHAR(info->tty)); + SET_MOXA_MUST_XOFF1_VALUE(info->ioaddr, STOP_CHAR(info->tty)); + if (I_IXON(info->tty)) { + ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr); + } else { + DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr); + } + if (I_IXOFF(info->tty)) { + ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr); + } else { + DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr); + } } - /* Start finding ISA boards from module arg */ - for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { - int cap; - if (!(cap = ioaddr[b])) - continue; + outb(fcr, info->ioaddr + UART_FCR); /* set fcr */ + outb(cval, info->ioaddr + UART_LCR); - retval = mxser_get_ISA_conf(cap, &hwconf); + return ret; +} - if (retval != 0) - printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", - mxser_brdname[hwconf.board_type - 1], ioaddr[b]); +static void mxser_check_modem_status(struct mxser_port *port, int status) +{ + /* update input line counters */ + if (status & UART_MSR_TERI) + port->icount.rng++; + if (status & UART_MSR_DDSR) + port->icount.dsr++; + if (status & UART_MSR_DDCD) + port->icount.dcd++; + if (status & UART_MSR_DCTS) + port->icount.cts++; + port->mon_data.modem_status = status; + wake_up_interruptible(&port->delta_msr_wait); - if (retval <= 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR "Invalid interrupt number, " - "board not configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR "Invalid interrupt number, " - "board not configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR "Invalid interrupt vector, " - "board not configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR "Invalid I/O address, " - "board not configured\n"); + if ((port->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { + if (status & UART_MSR_DCD) + wake_up_interruptible(&port->open_wait); + } - continue; + if (port->flags & ASYNC_CTS_FLOW) { + if (port->tty->hw_stopped) { + if (status & UART_MSR_CTS) { + port->tty->hw_stopped = 0; + + if ((port->type != PORT_16550A) && + (!port->board->chip_flag)) { + outb(port->IER & ~UART_IER_THRI, + port->ioaddr + UART_IER); + port->IER |= UART_IER_THRI; + outb(port->IER, port->ioaddr + + UART_IER); + } + tty_wakeup(port->tty); + } + } else { + if (!(status & UART_MSR_CTS)) { + port->tty->hw_stopped = 1; + if (port->type != PORT_16550A && + !port->board->chip_flag) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + + UART_IER); + } + } } + } +} - hwconf.pciInfo.busNum = 0; - hwconf.pciInfo.devNum = 0; - hwconf.pciInfo.pdev = NULL; +static int mxser_startup(struct mxser_port *info) +{ + unsigned long page; + unsigned long flags; - mxser_getcfg(m, &hwconf); - /* - * init mxsercfg first, - * or mxsercfg data is not correct on ISR. - */ - /* mxser_initbrd will hook ISR. */ - if (mxser_initbrd(m, &hwconf) < 0) - continue; + page = __get_free_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + spin_lock_irqsave(&info->slock, flags); - m++; + if (info->flags & ASYNC_INITIALIZED) { + free_page(page); + spin_unlock_irqrestore(&info->slock, flags); + return 0; } - /* start finding PCI board here */ -#ifdef CONFIG_PCI - n = ARRAY_SIZE(mxser_pcibrds) - 1; - index = 0; - b = 0; - while (b < n) { - pdev = pci_get_device(mxser_pcibrds[b].vendor, - mxser_pcibrds[b].device, pdev); - if (pdev == NULL) { - b++; - continue; - } - hwconf.pciInfo.busNum = busnum = pdev->bus->number; - hwconf.pciInfo.devNum = devnum = PCI_SLOT(pdev->devfn) << 3; - hwconf.pciInfo.pdev = pdev; - printk(KERN_INFO "Found MOXA %s board(BusNo=%d,DevNo=%d)\n", - mxser_brdname[(int) (mxser_pcibrds[b].driver_data) - 1], - busnum, devnum >> 3); - index++; - if (m >= MXSER_BOARDS) - printk(KERN_ERR - "Too many Smartio/Industio family boards find " - "(maximum %d), board not configured\n", - MXSER_BOARDS); - else { - if (pci_enable_device(pdev)) { - printk(KERN_ERR "Moxa SmartI/O PCI enable " - "fail !\n"); - continue; - } - retval = mxser_get_PCI_conf(busnum, devnum, - (int)mxser_pcibrds[b].driver_data, - &hwconf); - if (retval < 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR - "Invalid interrupt number, " - "board not configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR - "Invalid interrupt number, " - "board not configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR - "Invalid interrupt vector, " - "board not configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR - "Invalid I/O address, " - "board not configured\n"); - continue; - } - mxser_getcfg(m, &hwconf); - /* init mxsercfg first, - * or mxsercfg data is not correct on ISR. - */ - /* mxser_initbrd will hook ISR. */ - if (mxser_initbrd(m, &hwconf) < 0) - continue; - m++; - /* Keep an extra reference if we succeeded. It will - be returned at unload time */ - pci_dev_get(pdev); - } + if (!info->ioaddr || !info->type) { + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + free_page(page); + spin_unlock_irqrestore(&info->slock, flags); + return 0; } -#endif + if (info->xmit_buf) + free_page(page); + else + info->xmit_buf = (unsigned char *) page; - retval = tty_register_driver(mxvar_sdriver); - if (retval) { - printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family" - " driver !\n"); - put_tty_driver(mxvar_sdriver); + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in mxser_change_speed()) + */ + if (info->board->chip_flag) + outb((UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT | + MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR); + else + outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), + info->ioaddr + UART_FCR); - for (i = 0; i < MXSER_BOARDS; i++) { - if (mxsercfg[i].board_type == -1) - continue; - else { - free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]); - /* todo: release io, vector */ - } - } - return retval; + /* + * At this point there's no way the LSR could still be 0xFF; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (inb(info->ioaddr + UART_LSR) == 0xff) { + spin_unlock_irqrestore(&info->slock, flags); + if (capable(CAP_SYS_ADMIN)) { + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + return 0; + } else + return -ENODEV; } + /* + * Clear the interrupt registers. + */ + (void) inb(info->ioaddr + UART_LSR); + (void) inb(info->ioaddr + UART_RX); + (void) inb(info->ioaddr + UART_IIR); + (void) inb(info->ioaddr + UART_MSR); + + /* + * Now, initialize the UART + */ + outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */ + info->MCR = UART_MCR_DTR | UART_MCR_RTS; + outb(info->MCR, info->ioaddr + UART_MCR); + + /* + * Finally, enable interrupts + */ + info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; + + if (info->board->chip_flag) + info->IER |= MOXA_MUST_IER_EGDAI; + outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */ + + /* + * And clear the interrupt registers again for luck. + */ + (void) inb(info->ioaddr + UART_LSR); + (void) inb(info->ioaddr + UART_RX); + (void) inb(info->ioaddr + UART_IIR); + (void) inb(info->ioaddr + UART_MSR); + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + /* + * and set the speed of the serial port + */ + mxser_change_speed(info, NULL); + info->flags |= ASYNC_INITIALIZED; + spin_unlock_irqrestore(&info->slock, flags); + return 0; } -static void mxser_do_softint(struct work_struct *work) +/* + * This routine will shutdown a serial port; interrupts maybe disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void mxser_shutdown(struct mxser_port *info) { - struct mxser_struct *info = - container_of(work, struct mxser_struct, tqueue); - struct tty_struct *tty; + unsigned long flags; - tty = info->tty; + if (!(info->flags & ASYNC_INITIALIZED)) + return; + + spin_lock_irqsave(&info->slock, flags); + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free the irq + * here so the queue might never be waken up + */ + wake_up_interruptible(&info->delta_msr_wait); - if (tty) { - if (test_and_clear_bit(MXSER_EVENT_TXLOW, &info->event)) - tty_wakeup(tty); - if (test_and_clear_bit(MXSER_EVENT_HANGUP, &info->event)) - tty_hangup(tty); + /* + * Free the IRQ, if necessary + */ + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = NULL; } -} -static unsigned char mxser_get_msr(int baseaddr, int mode, int port, struct mxser_struct *info) -{ - unsigned char status = 0; + info->IER = 0; + outb(0x00, info->ioaddr + UART_IER); - status = inb(baseaddr + UART_MSR); + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); + outb(info->MCR, info->ioaddr + UART_MCR); - mxser_msr[port] &= 0x0F; - mxser_msr[port] |= status; - status = mxser_msr[port]; - if (mode) - mxser_msr[port] = 0; + /* clear Rx/Tx FIFO's */ + if (info->board->chip_flag) + outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | + MOXA_MUST_FCR_GDA_MODE_ENABLE, + info->ioaddr + UART_FCR); + else + outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + info->ioaddr + UART_FCR); - return status; + /* read data port to reset things */ + (void) inb(info->ioaddr + UART_RX); + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + + if (info->board->chip_flag) + SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); + + spin_unlock_irqrestore(&info->slock, flags); } /* @@ -958,19 +893,17 @@ static unsigned char mxser_get_msr(int baseaddr, int mode, int port, struct mxse */ static int mxser_open(struct tty_struct *tty, struct file *filp) { - struct mxser_struct *info; + struct mxser_port *info; + unsigned long flags; int retval, line; - /* initialize driver_data in case something fails */ - tty->driver_data = NULL; - line = tty->index; if (line == MXSER_PORTS) return 0; if (line < 0 || line > MXSER_PORTS) return -ENODEV; - info = mxvar_table + line; - if (!info->base) + info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD]; + if (!info->ioaddr) return -ENODEV; tty->driver_data = info; @@ -978,6 +911,9 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) /* * Start up serial port */ + spin_lock_irqsave(&info->slock, flags); + info->count++; + spin_unlock_irqrestore(&info->slock, flags); retval = mxser_startup(info); if (retval) return retval; @@ -986,21 +922,6 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) if (retval) return retval; - info->count++; - - if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { - if (tty->driver->subtype == SERIAL_TYPE_NORMAL) - *tty->termios = info->normal_termios; - else - *tty->termios = info->callout_termios; - mxser_change_speed(info, NULL); - } - - /* - status = mxser_get_msr(info->base, 0, info->port); - mxser_check_modem_status(info, status); - */ - /* unmark here for very high baud rate (ex. 921600 bps) used */ tty->low_latency = 1; return 0; @@ -1014,11 +935,10 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) */ static void mxser_close(struct tty_struct *tty, struct file *filp) { - struct mxser_struct *info = tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long timeout; unsigned long flags; - struct tty_ldisc *ld; if (tty->index == MXSER_PORTS) return; @@ -1045,7 +965,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) } if (--info->count < 0) { printk(KERN_ERR "mxser_close: bad serial port count for " - "ttys%d: %d\n", info->port, info->count); + "ttys%d: %d\n", tty->index, info->count); info->count = 0; } if (info->count) { @@ -1074,20 +994,18 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) * line status register. */ info->IER &= ~UART_IER_RLSI; - if (info->IsMoxaMustChipFlag) + if (info->board->chip_flag) info->IER &= ~MOXA_MUST_RECV_ISR; -/* by William - info->read_status_mask &= ~UART_LSR_DR; -*/ + if (info->flags & ASYNC_INITIALIZED) { - outb(info->IER, info->base + UART_IER); + outb(info->IER, info->ioaddr + UART_IER); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially * important if there is a transmit FIFO! */ timeout = jiffies + HZ; - while (!(inb(info->base + UART_LSR) & UART_LSR_TEMT)) { + while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { schedule_timeout_interruptible(5); if (time_after(jiffies, timeout)) break; @@ -1097,14 +1015,9 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) if (tty->driver->flush_buffer) tty->driver->flush_buffer(tty); - - ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->flush_buffer) - ld->flush_buffer(tty); - tty_ldisc_deref(ld); - } - + + tty_ldisc_flush(tty); + tty->closing = 0; info->event = 0; info->tty = NULL; @@ -1115,14 +1028,12 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) } info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - } static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) { int c, total = 0; - struct mxser_struct *info = tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long flags; if (!info->xmit_buf) @@ -1146,13 +1057,15 @@ static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int cou total += c; } - if (info->xmit_cnt && !tty->stopped && !(info->IER & UART_IER_THRI)) { + if (info->xmit_cnt && !tty->stopped) { if (!tty->hw_stopped || (info->type == PORT_16550A) || - (info->IsMoxaMustChipFlag)) { + (info->board->chip_flag)) { spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + + UART_IER); info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); + outb(info->IER, info->ioaddr + UART_IER); spin_unlock_irqrestore(&info->slock, flags); } } @@ -1161,7 +1074,7 @@ static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int cou static void mxser_put_char(struct tty_struct *tty, unsigned char ch) { - struct mxser_struct *info = tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long flags; if (!info->xmit_buf) @@ -1175,13 +1088,14 @@ static void mxser_put_char(struct tty_struct *tty, unsigned char ch) info->xmit_head &= SERIAL_XMIT_SIZE - 1; info->xmit_cnt++; spin_unlock_irqrestore(&info->slock, flags); - if (!tty->stopped && !(info->IER & UART_IER_THRI)) { + if (!tty->stopped) { if (!tty->hw_stopped || (info->type == PORT_16550A) || - info->IsMoxaMustChipFlag) { + info->board->chip_flag) { spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); + outb(info->IER, info->ioaddr + UART_IER); spin_unlock_irqrestore(&info->slock, flags); } } @@ -1190,7 +1104,7 @@ static void mxser_put_char(struct tty_struct *tty, unsigned char ch) static void mxser_flush_chars(struct tty_struct *tty) { - struct mxser_struct *info = tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long flags; if (info->xmit_cnt <= 0 || @@ -1198,21 +1112,22 @@ static void mxser_flush_chars(struct tty_struct *tty) !info->xmit_buf || (tty->hw_stopped && (info->type != PORT_16550A) && - (!info->IsMoxaMustChipFlag) + (!info->board->chip_flag) )) return; spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); + outb(info->IER, info->ioaddr + UART_IER); spin_unlock_irqrestore(&info->slock, flags); } static int mxser_write_room(struct tty_struct *tty) { - struct mxser_struct *info = tty->driver_data; + struct mxser_port *info = tty->driver_data; int ret; ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; @@ -1223,13 +1138,13 @@ static int mxser_write_room(struct tty_struct *tty) static int mxser_chars_in_buffer(struct tty_struct *tty) { - struct mxser_struct *info = tty->driver_data; + struct mxser_port *info = tty->driver_data; return info->xmit_cnt; } static void mxser_flush_buffer(struct tty_struct *tty) { - struct mxser_struct *info = tty->driver_data; + struct mxser_port *info = tty->driver_data; char fcr; unsigned long flags; @@ -1237,39 +1152,497 @@ static void mxser_flush_buffer(struct tty_struct *tty) spin_lock_irqsave(&info->slock, flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - /* below added by shinhay */ - fcr = inb(info->base + UART_FCR); + fcr = inb(info->ioaddr + UART_FCR); outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->base + UART_FCR); - outb(fcr, info->base + UART_FCR); + info->ioaddr + UART_FCR); + outb(fcr, info->ioaddr + UART_FCR); spin_unlock_irqrestore(&info->slock, flags); - /* above added by shinhay */ tty_wakeup(tty); } -static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) +/* + * ------------------------------------------------------------ + * friends of mxser_ioctl() + * ------------------------------------------------------------ + */ +static int mxser_get_serial_info(struct mxser_port *info, + struct serial_struct __user *retinfo) { - struct mxser_struct *info = tty->driver_data; - int retval; - struct async_icount cprev, cnow; /* kernel counter temps */ + struct serial_struct tmp = { + .type = info->type, + .line = info->tty->index, + .port = info->ioaddr, + .irq = info->board->irq, + .flags = info->flags, + .baud_base = info->baud_base, + .close_delay = info->close_delay, + .closing_wait = info->closing_wait, + .custom_divisor = info->custom_divisor, + .hub6 = 0 + }; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int mxser_set_serial_info(struct mxser_port *info, + struct serial_struct __user *new_info) +{ + struct serial_struct new_serial; + speed_t baud; + unsigned long sl_flags; + unsigned int flags; + int retval = 0; + + if (!new_info || !info->ioaddr) + return -ENODEV; + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + + if (new_serial.irq != info->board->irq || + new_serial.port != info->ioaddr) + return -EINVAL; + + flags = info->flags & ASYNC_SPD_MASK; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != info->baud_base) || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + } else { + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + info->flags = ((info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->close_delay = new_serial.close_delay * HZ / 100; + info->closing_wait = new_serial.closing_wait * HZ / 100; + info->tty->low_latency = + (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + info->tty->low_latency = 0; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && + (new_serial.baud_base != info->baud_base || + new_serial.custom_divisor != + info->custom_divisor)) { + baud = new_serial.baud_base / new_serial.custom_divisor; + tty_encode_baud_rate(info->tty, baud, baud); + } + } + + info->type = new_serial.type; + + process_txrx_fifo(info); + + if (info->flags & ASYNC_INITIALIZED) { + if (flags != (info->flags & ASYNC_SPD_MASK)) { + spin_lock_irqsave(&info->slock, sl_flags); + mxser_change_speed(info, NULL); + spin_unlock_irqrestore(&info->slock, sl_flags); + } + } else + retval = mxser_startup(info); + + return retval; +} + +/* + * mxser_get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int mxser_get_lsr_info(struct mxser_port *info, + unsigned int __user *value) +{ + unsigned char status; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + status = inb(info->ioaddr + UART_LSR); + spin_unlock_irqrestore(&info->slock, flags); + result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); + return put_user(result, value); +} + +/* + * This routine sends a break character out the serial port. + */ +static void mxser_send_break(struct mxser_port *info, int duration) +{ + unsigned long flags; + + if (!info->ioaddr) + return; + set_current_state(TASK_INTERRUPTIBLE); + spin_lock_irqsave(&info->slock, flags); + outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, + info->ioaddr + UART_LCR); + spin_unlock_irqrestore(&info->slock, flags); + schedule_timeout(duration); + spin_lock_irqsave(&info->slock, flags); + outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, + info->ioaddr + UART_LCR); + spin_unlock_irqrestore(&info->slock, flags); +} + +static int mxser_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct mxser_port *info = tty->driver_data; + unsigned char control, status; + unsigned long flags; + + + if (tty->index == MXSER_PORTS) + return -ENOIOCTLCMD; + if (test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; + + control = info->MCR; + + spin_lock_irqsave(&info->slock, flags); + status = inb(info->ioaddr + UART_MSR); + if (status & UART_MSR_ANY_DELTA) + mxser_check_modem_status(info, status); + spin_unlock_irqrestore(&info->slock, flags); + return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | + ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | + ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | + ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | + ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | + ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); +} + +static int mxser_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + + if (tty->index == MXSER_PORTS) + return -ENOIOCTLCMD; + if (test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; + + spin_lock_irqsave(&info->slock, flags); + + if (set & TIOCM_RTS) + info->MCR |= UART_MCR_RTS; + if (set & TIOCM_DTR) + info->MCR |= UART_MCR_DTR; + + if (clear & TIOCM_RTS) + info->MCR &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + info->MCR &= ~UART_MCR_DTR; + + outb(info->MCR, info->ioaddr + UART_MCR); + spin_unlock_irqrestore(&info->slock, flags); + return 0; +} + +static int __init mxser_program_mode(int port) +{ + int id, i, j, n; + + outb(0, port); + outb(0, port); + outb(0, port); + (void)inb(port); + (void)inb(port); + outb(0, port); + (void)inb(port); + + id = inb(port + 1) & 0x1F; + if ((id != C168_ASIC_ID) && + (id != C104_ASIC_ID) && + (id != C102_ASIC_ID) && + (id != CI132_ASIC_ID) && + (id != CI134_ASIC_ID) && + (id != CI104J_ASIC_ID)) + return -1; + for (i = 0, j = 0; i < 4; i++) { + n = inb(port + 2); + if (n == 'M') { + j = 1; + } else if ((j == 1) && (n == 1)) { + j = 2; + break; + } else + j = 0; + } + if (j != 2) + id = -2; + return id; +} + +static void __init mxser_normal_mode(int port) +{ + int i, n; + + outb(0xA5, port + 1); + outb(0x80, port + 3); + outb(12, port + 0); /* 9600 bps */ + outb(0, port + 1); + outb(0x03, port + 3); /* 8 data bits */ + outb(0x13, port + 4); /* loop back mode */ + for (i = 0; i < 16; i++) { + n = inb(port + 5); + if ((n & 0x61) == 0x60) + break; + if ((n & 1) == 1) + (void)inb(port); + } + outb(0x00, port + 4); +} + +#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ +#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ +#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ +#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ +#define EN_CCMD 0x000 /* Chip's command register */ +#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ +#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ +#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ +#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ +#define EN0_DCFG 0x00E /* Data configuration reg WR */ +#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ +#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ +#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ +static int __init mxser_read_register(int port, unsigned short *regs) +{ + int i, k, value, id; + unsigned int j; + + id = mxser_program_mode(port); + if (id < 0) + return id; + for (i = 0; i < 14; i++) { + k = (i & 0x3F) | 0x180; + for (j = 0x100; j > 0; j >>= 1) { + outb(CHIP_CS, port); + if (k & j) { + outb(CHIP_CS | CHIP_DO, port); + outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ + } else { + outb(CHIP_CS, port); + outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ + } + } + (void)inb(port); + value = 0; + for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { + outb(CHIP_CS, port); + outb(CHIP_CS | CHIP_SK, port); + if (inb(port) & CHIP_DI) + value |= j; + } + regs[i] = value; + outb(0, port); + } + mxser_normal_mode(port); + return id; +} + +static int mxser_ioctl_special(unsigned int cmd, void __user *argp) +{ + struct mxser_port *port; + int result, status; + unsigned int i, j; + + switch (cmd) { + case MOXA_GET_MAJOR: + return put_user(ttymajor, (int __user *)argp); + + case MOXA_CHKPORTENABLE: + result = 0; + + for (i = 0; i < MXSER_BOARDS; i++) + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) + if (mxser_boards[i].ports[j].ioaddr) + result |= (1 << i); + + return put_user(result, (unsigned long __user *)argp); + case MOXA_GETDATACOUNT: + if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) + return -EFAULT; + return 0; + case MOXA_GETMSTATUS: + for (i = 0; i < MXSER_BOARDS; i++) + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { + port = &mxser_boards[i].ports[j]; + + GMStatus[i].ri = 0; + if (!port->ioaddr) { + GMStatus[i].dcd = 0; + GMStatus[i].dsr = 0; + GMStatus[i].cts = 0; + continue; + } + + if (!port->tty || !port->tty->termios) + GMStatus[i].cflag = + port->normal_termios.c_cflag; + else + GMStatus[i].cflag = + port->tty->termios->c_cflag; + + status = inb(port->ioaddr + UART_MSR); + if (status & 0x80 /*UART_MSR_DCD */ ) + GMStatus[i].dcd = 1; + else + GMStatus[i].dcd = 0; + + if (status & 0x20 /*UART_MSR_DSR */ ) + GMStatus[i].dsr = 1; + else + GMStatus[i].dsr = 0; + + + if (status & 0x10 /*UART_MSR_CTS */ ) + GMStatus[i].cts = 1; + else + GMStatus[i].cts = 0; + } + if (copy_to_user(argp, GMStatus, + sizeof(struct mxser_mstatus) * MXSER_PORTS)) + return -EFAULT; + return 0; + case MOXA_ASPP_MON_EXT: { + int p, shiftbit; + unsigned long opmode; + unsigned cflag, iflag; + + for (i = 0; i < MXSER_BOARDS; i++) + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { + port = &mxser_boards[i].ports[j]; + if (!port->ioaddr) + continue; + + status = mxser_get_msr(port->ioaddr, 0, i); + + if (status & UART_MSR_TERI) + port->icount.rng++; + if (status & UART_MSR_DDSR) + port->icount.dsr++; + if (status & UART_MSR_DDCD) + port->icount.dcd++; + if (status & UART_MSR_DCTS) + port->icount.cts++; + + port->mon_data.modem_status = status; + mon_data_ext.rx_cnt[i] = port->mon_data.rxcnt; + mon_data_ext.tx_cnt[i] = port->mon_data.txcnt; + mon_data_ext.up_rxcnt[i] = + port->mon_data.up_rxcnt; + mon_data_ext.up_txcnt[i] = + port->mon_data.up_txcnt; + mon_data_ext.modem_status[i] = + port->mon_data.modem_status; + mon_data_ext.baudrate[i] = + tty_get_baud_rate(port->tty); + + if (!port->tty || !port->tty->termios) { + cflag = port->normal_termios.c_cflag; + iflag = port->normal_termios.c_iflag; + } else { + cflag = port->tty->termios->c_cflag; + iflag = port->tty->termios->c_iflag; + } + + mon_data_ext.databits[i] = cflag & CSIZE; + + mon_data_ext.stopbits[i] = cflag & CSTOPB; + + mon_data_ext.parity[i] = + cflag & (PARENB | PARODD | CMSPAR); + + mon_data_ext.flowctrl[i] = 0x00; + + if (cflag & CRTSCTS) + mon_data_ext.flowctrl[i] |= 0x03; + + if (iflag & (IXON | IXOFF)) + mon_data_ext.flowctrl[i] |= 0x0C; + + if (port->type == PORT_16550A) + mon_data_ext.fifo[i] = 1; + else + mon_data_ext.fifo[i] = 0; + + p = i % 4; + shiftbit = p * 2; + opmode = inb(port->opmode_ioaddr) >> shiftbit; + opmode &= OP_MODE_MASK; + + mon_data_ext.iftype[i] = opmode; + + } + if (copy_to_user(argp, &mon_data_ext, + sizeof(mon_data_ext))) + return -EFAULT; + + return 0; + + } default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, + struct async_icount *cprev) +{ + struct async_icount cnow; + unsigned long flags; + int ret; + + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; /* atomic copy */ + spin_unlock_irqrestore(&info->slock, flags); + + ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +static int mxser_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct mxser_port *info = tty->driver_data; + struct async_icount cnow; struct serial_icounter_struct __user *p_cuser; - unsigned long templ; unsigned long flags; void __user *argp = (void __user *)arg; + int retval; if (tty->index == MXSER_PORTS) return mxser_ioctl_special(cmd, argp); - /* following add by Victor Yu. 01-05-2004 */ if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { - int opmode, p; + int p; + unsigned long opmode; static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; int shiftbit; unsigned char val, mask; - p = info->port % 4; + p = tty->index % 4; if (cmd == MOXA_SET_OP_MODE) { if (get_user(opmode, (int __user *) argp)) return -EFAULT; @@ -1288,17 +1661,16 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int c shiftbit = p * 2; opmode = inb(info->opmode_ioaddr) >> shiftbit; opmode &= OP_MODE_MASK; - if (copy_to_user(argp, &opmode, sizeof(int))) + if (put_user(opmode, (int __user *)argp)) return -EFAULT; } return 0; } - /* above add by Victor Yu. 01-05-2004 */ - if ((cmd != TIOCGSERIAL) && (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } + if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT && + test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; + switch (cmd) { case TCSBRK: /* SVID version: non-zero arg --> no break */ retval = tty_check_change(tty); @@ -1316,11 +1688,10 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int c mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4); return 0; case TIOCGSOFTCAR: - return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp); + return put_user(!!C_CLOCAL(tty), (unsigned long __user *)argp); case TIOCSSOFTCAR: - if (get_user(templ, (unsigned long __user *) argp)) + if (get_user(arg, (unsigned long __user *)argp)) return -EFAULT; - arg = templ; tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); return 0; case TIOCGSERIAL: @@ -1340,30 +1711,19 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int c cnow = info->icount; /* note the counters on entry */ spin_unlock_irqrestore(&info->slock, flags); - wait_event_interruptible(info->delta_msr_wait, ({ - cprev = cnow; - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; /* atomic copy */ - spin_unlock_irqrestore(&info->slock, flags); - - ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)); - })); - break; - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ + return wait_event_interruptible(info->delta_msr_wait, + mxser_cflags_changed(info, arg, &cnow)); + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ case TIOCGICOUNT: spin_lock_irqsave(&info->slock, flags); cnow = info->icount; spin_unlock_irqrestore(&info->slock, flags); p_cuser = argp; - /* modified by casper 1/11/2000 */ if (put_user(cnow.frame, &p_cuser->frame)) return -EFAULT; if (put_user(cnow.brk, &p_cuser->brk)) @@ -1385,240 +1745,65 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int c return 0; case MOXA_HighSpeedOn: return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); - case MOXA_SDS_RSTICOUNTER: { - info->mon_data.rxcnt = 0; - info->mon_data.txcnt = 0; - return 0; - } -/* (above) added by James. */ - case MOXA_ASPP_SETBAUD:{ - long baud; - if (get_user(baud, (long __user *)argp)) - return -EFAULT; - mxser_set_baud(info, baud); - return 0; - } - case MOXA_ASPP_GETBAUD: - if (copy_to_user(argp, &info->realbaud, sizeof(long))) - return -EFAULT; - + case MOXA_SDS_RSTICOUNTER: + info->mon_data.rxcnt = 0; + info->mon_data.txcnt = 0; return 0; case MOXA_ASPP_OQUEUE:{ - int len, lsr; + int len, lsr; - len = mxser_chars_in_buffer(tty); + len = mxser_chars_in_buffer(tty); - lsr = inb(info->base + UART_LSR) & UART_LSR_TEMT; + lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT; - len += (lsr ? 0 : 1); + len += (lsr ? 0 : 1); - if (copy_to_user(argp, &len, sizeof(int))) - return -EFAULT; - - return 0; - } + return put_user(len, (int __user *)argp); + } case MOXA_ASPP_MON: { - int mcr, status; - - /* info->mon_data.ser_param = tty->termios->c_cflag; */ + int mcr, status; - status = mxser_get_msr(info->base, 1, info->port, info); - mxser_check_modem_status(info, status); - - mcr = inb(info->base + UART_MCR); - if (mcr & MOXA_MUST_MCR_XON_FLAG) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; - - if (mcr & MOXA_MUST_MCR_TX_XON) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; - - if (info->tty->hw_stopped) - info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; - else - info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; - - if (copy_to_user(argp, &info->mon_data, - sizeof(struct mxser_mon))) - return -EFAULT; - - return 0; - } - - case MOXA_ASPP_LSTATUS: { - if (copy_to_user(argp, &info->err_shadow, - sizeof(unsigned char))) - return -EFAULT; - - info->err_shadow = 0; - return 0; - } - case MOXA_SET_BAUD_METHOD: { - int method; - - if (get_user(method, (int __user *)argp)) - return -EFAULT; - mxser_set_baud_method[info->port] = method; - if (copy_to_user(argp, &method, sizeof(int))) - return -EFAULT; + status = mxser_get_msr(info->ioaddr, 1, tty->index); + mxser_check_modem_status(info, status); - return 0; - } - default: - return -ENOIOCTLCMD; - } - return 0; -} + mcr = inb(info->ioaddr + UART_MCR); + if (mcr & MOXA_MUST_MCR_XON_FLAG) + info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; + else + info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; -#ifndef CMSPAR -#define CMSPAR 010000000000 -#endif + if (mcr & MOXA_MUST_MCR_TX_XON) + info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; + else + info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; -static int mxser_ioctl_special(unsigned int cmd, void __user *argp) -{ - int i, result, status; + if (info->tty->hw_stopped) + info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; + else + info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; - switch (cmd) { - case MOXA_GET_CONF: - if (copy_to_user(argp, mxsercfg, - sizeof(struct mxser_hwconf) * 4)) + if (copy_to_user(argp, &info->mon_data, + sizeof(struct mxser_mon))) return -EFAULT; - return 0; - case MOXA_GET_MAJOR: - if (copy_to_user(argp, &ttymajor, sizeof(int))) - return -EFAULT; - return 0; - case MOXA_GET_CUMAJOR: - if (copy_to_user(argp, &calloutmajor, sizeof(int))) - return -EFAULT; return 0; - - case MOXA_CHKPORTENABLE: - result = 0; - for (i = 0; i < MXSER_PORTS; i++) { - if (mxvar_table[i].base) - result |= (1 << i); - } - return put_user(result, (unsigned long __user *)argp); - case MOXA_GETDATACOUNT: - if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) + } + case MOXA_ASPP_LSTATUS: { + if (put_user(info->err_shadow, (unsigned char __user *)argp)) return -EFAULT; - return 0; - case MOXA_GETMSTATUS: - for (i = 0; i < MXSER_PORTS; i++) { - GMStatus[i].ri = 0; - if (!mxvar_table[i].base) { - GMStatus[i].dcd = 0; - GMStatus[i].dsr = 0; - GMStatus[i].cts = 0; - continue; - } - - if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) - GMStatus[i].cflag = mxvar_table[i].normal_termios.c_cflag; - else - GMStatus[i].cflag = mxvar_table[i].tty->termios->c_cflag; - - status = inb(mxvar_table[i].base + UART_MSR); - if (status & 0x80 /*UART_MSR_DCD */ ) - GMStatus[i].dcd = 1; - else - GMStatus[i].dcd = 0; - - if (status & 0x20 /*UART_MSR_DSR */ ) - GMStatus[i].dsr = 1; - else - GMStatus[i].dsr = 0; - - if (status & 0x10 /*UART_MSR_CTS */ ) - GMStatus[i].cts = 1; - else - GMStatus[i].cts = 0; - } - if (copy_to_user(argp, GMStatus, - sizeof(struct mxser_mstatus) * MXSER_PORTS)) - return -EFAULT; + info->err_shadow = 0; return 0; - case MOXA_ASPP_MON_EXT: { - int status; - int opmode, p; - int shiftbit; - unsigned cflag, iflag; - - for (i = 0; i < MXSER_PORTS; i++) { - if (!mxvar_table[i].base) - continue; - - status = mxser_get_msr(mxvar_table[i].base, 0, - i, &(mxvar_table[i])); - /* - mxser_check_modem_status(&mxvar_table[i], - status); - */ - if (status & UART_MSR_TERI) - mxvar_table[i].icount.rng++; - if (status & UART_MSR_DDSR) - mxvar_table[i].icount.dsr++; - if (status & UART_MSR_DDCD) - mxvar_table[i].icount.dcd++; - if (status & UART_MSR_DCTS) - mxvar_table[i].icount.cts++; - - mxvar_table[i].mon_data.modem_status = status; - mon_data_ext.rx_cnt[i] = mxvar_table[i].mon_data.rxcnt; - mon_data_ext.tx_cnt[i] = mxvar_table[i].mon_data.txcnt; - mon_data_ext.up_rxcnt[i] = mxvar_table[i].mon_data.up_rxcnt; - mon_data_ext.up_txcnt[i] = mxvar_table[i].mon_data.up_txcnt; - mon_data_ext.modem_status[i] = mxvar_table[i].mon_data.modem_status; - mon_data_ext.baudrate[i] = mxvar_table[i].realbaud; - - if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) { - cflag = mxvar_table[i].normal_termios.c_cflag; - iflag = mxvar_table[i].normal_termios.c_iflag; - } else { - cflag = mxvar_table[i].tty->termios->c_cflag; - iflag = mxvar_table[i].tty->termios->c_iflag; - } - - mon_data_ext.databits[i] = cflag & CSIZE; - - mon_data_ext.stopbits[i] = cflag & CSTOPB; - - mon_data_ext.parity[i] = cflag & (PARENB | PARODD | CMSPAR); - - mon_data_ext.flowctrl[i] = 0x00; - - if (cflag & CRTSCTS) - mon_data_ext.flowctrl[i] |= 0x03; - - if (iflag & (IXON | IXOFF)) - mon_data_ext.flowctrl[i] |= 0x0C; - - if (mxvar_table[i].type == PORT_16550A) - mon_data_ext.fifo[i] = 1; - else - mon_data_ext.fifo[i] = 0; - - p = i % 4; - shiftbit = p * 2; - opmode = inb(mxvar_table[i].opmode_ioaddr) >> shiftbit; - opmode &= OP_MODE_MASK; - - mon_data_ext.iftype[i] = opmode; - - } - if (copy_to_user(argp, &mon_data_ext, sizeof(struct mxser_mon_ext))) - return -EFAULT; - - return 0; + } + case MOXA_SET_BAUD_METHOD: { + int method; - } + if (get_user(method, (int __user *)argp)) + return -EFAULT; + mxser_set_baud_method[tty->index] = method; + return put_user(method, (int __user *)argp); + } default: return -ENOIOCTLCMD; } @@ -1627,107 +1812,105 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) static void mxser_stoprx(struct tty_struct *tty) { - struct mxser_struct *info = tty->driver_data; - /* unsigned long flags; */ + struct mxser_port *info = tty->driver_data; info->ldisc_stop_rx = 1; if (I_IXOFF(tty)) { - /* MX_LOCK(&info->slock); */ - /* following add by Victor Yu. 09-02-2002 */ - if (info->IsMoxaMustChipFlag) { + if (info->board->chip_flag) { info->IER &= ~MOXA_MUST_RECV_ISR; - outb(info->IER, info->base + UART_IER); + outb(info->IER, info->ioaddr + UART_IER); } else { - /* above add by Victor Yu. 09-02-2002 */ info->x_char = STOP_CHAR(tty); - /* mask by Victor Yu. 09-02-2002 */ - /* outb(info->IER, 0); */ - outb(0, info->base + UART_IER); + outb(0, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; - /* force Tx interrupt */ - outb(info->IER, info->base + UART_IER); - } /* add by Victor Yu. 09-02-2002 */ - /* MX_UNLOCK(&info->slock); */ + outb(info->IER, info->ioaddr + UART_IER); + } } if (info->tty->termios->c_cflag & CRTSCTS) { - /* MX_LOCK(&info->slock); */ info->MCR &= ~UART_MCR_RTS; - outb(info->MCR, info->base + UART_MCR); - /* MX_UNLOCK(&info->slock); */ + outb(info->MCR, info->ioaddr + UART_MCR); } } -static void mxser_startrx(struct tty_struct *tty) +/* + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + */ +static void mxser_throttle(struct tty_struct *tty) +{ + mxser_stoprx(tty); +} + +static void mxser_unthrottle(struct tty_struct *tty) { - struct mxser_struct *info = tty->driver_data; - /* unsigned long flags; */ + struct mxser_port *info = tty->driver_data; + /* startrx */ info->ldisc_stop_rx = 0; if (I_IXOFF(tty)) { if (info->x_char) info->x_char = 0; else { - /* MX_LOCK(&info->slock); */ - - /* following add by Victor Yu. 09-02-2002 */ - if (info->IsMoxaMustChipFlag) { + if (info->board->chip_flag) { info->IER |= MOXA_MUST_RECV_ISR; - outb(info->IER, info->base + UART_IER); + outb(info->IER, info->ioaddr + UART_IER); } else { - /* above add by Victor Yu. 09-02-2002 */ - info->x_char = START_CHAR(tty); - /* mask by Victor Yu. 09-02-2002 */ - /* outb(info->IER, 0); */ - /* add by Victor Yu. 09-02-2002 */ - outb(0, info->base + UART_IER); - /* force Tx interrupt */ + outb(0, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } /* add by Victor Yu. 09-02-2002 */ - /* MX_UNLOCK(&info->slock); */ + outb(info->IER, info->ioaddr + UART_IER); + } } } if (info->tty->termios->c_cflag & CRTSCTS) { - /* MX_LOCK(&info->slock); */ info->MCR |= UART_MCR_RTS; - outb(info->MCR, info->base + UART_MCR); - /* MX_UNLOCK(&info->slock); */ + outb(info->MCR, info->ioaddr + UART_MCR); } } /* - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. + * mxser_stop() and mxser_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. */ -static void mxser_throttle(struct tty_struct *tty) +static void mxser_stop(struct tty_struct *tty) { - /* struct mxser_struct *info = tty->driver_data; */ - /* unsigned long flags; */ + struct mxser_port *info = tty->driver_data; + unsigned long flags; - /* MX_LOCK(&info->slock); */ - mxser_stoprx(tty); - /* MX_UNLOCK(&info->slock); */ + spin_lock_irqsave(&info->slock, flags); + if (info->IER & UART_IER_THRI) { + info->IER &= ~UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + spin_unlock_irqrestore(&info->slock, flags); } -static void mxser_unthrottle(struct tty_struct *tty) +static void mxser_start(struct tty_struct *tty) { - /* struct mxser_struct *info = tty->driver_data; */ - /* unsigned long flags; */ + struct mxser_port *info = tty->driver_data; + unsigned long flags; - /* MX_LOCK(&info->slock); */ - mxser_startrx(tty); - /* MX_UNLOCK(&info->slock); */ + spin_lock_irqsave(&info->slock, flags); + if (info->xmit_cnt && info->xmit_buf) { + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + spin_unlock_irqrestore(&info->slock, flags); } static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct mxser_struct *info = tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long flags; + spin_lock_irqsave(&info->slock, flags); mxser_change_speed(info, old_termios); + spin_unlock_irqrestore(&info->slock, flags); if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) { @@ -1735,61 +1918,27 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi mxser_start(tty); } -/* Handle sw stopped */ + /* Handle sw stopped */ if ((old_termios->c_iflag & IXON) && !(tty->termios->c_iflag & IXON)) { tty->stopped = 0; - /* following add by Victor Yu. 09-02-2002 */ - if (info->IsMoxaMustChipFlag) { + if (info->board->chip_flag) { spin_lock_irqsave(&info->slock, flags); - DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); + DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr); spin_unlock_irqrestore(&info->slock, flags); } - /* above add by Victor Yu. 09-02-2002 */ mxser_start(tty); } } /* - * mxser_stop() and mxser_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - */ -static void mxser_stop(struct tty_struct *tty) -{ - struct mxser_struct *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->IER & UART_IER_THRI) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_start(struct tty_struct *tty) -{ - struct mxser_struct *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) { - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -/* * mxser_wait_until_sent() --- wait until the transmitter is empty */ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) { - struct mxser_struct *info = tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long orig_jiffies, char_time; int lsr; @@ -1830,7 +1979,7 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) timeout, char_time); printk("jiff=%lu...", jiffies); #endif - while (!((lsr = inb(info->base + UART_LSR)) & UART_LSR_TEMT)) { + while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) { #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...", lsr, jiffies); #endif @@ -1847,13 +1996,12 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) #endif } - /* * This routine is called by tty_hangup() when a hangup is signaled. */ -void mxser_hangup(struct tty_struct *tty) +static void mxser_hangup(struct tty_struct *tty) { - struct mxser_struct *info = tty->driver_data; + struct mxser_port *info = tty->driver_data; mxser_flush_buffer(tty); mxser_shutdown(info); @@ -1864,231 +2012,73 @@ void mxser_hangup(struct tty_struct *tty) wake_up_interruptible(&info->open_wait); } - -/* added by James 03-12-2004. */ /* * mxser_rs_break() --- routine which turns the break handling on or off */ static void mxser_rs_break(struct tty_struct *tty, int break_state) { - struct mxser_struct *info = tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long flags; spin_lock_irqsave(&info->slock, flags); if (break_state == -1) - outb(inb(info->base + UART_LCR) | UART_LCR_SBC, - info->base + UART_LCR); + outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, + info->ioaddr + UART_LCR); else - outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, - info->base + UART_LCR); + outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, + info->ioaddr + UART_LCR); spin_unlock_irqrestore(&info->slock, flags); } -/* (above) added by James. */ - - -/* - * This is the serial driver's generic interrupt routine - */ -static irqreturn_t mxser_interrupt(int irq, void *dev_id) +static void mxser_receive_chars(struct mxser_port *port, int *status) { - int status, iir, i; - struct mxser_struct *info; - struct mxser_struct *port; - int max, irqbits, bits, msr; - int pass_counter = 0; - int handled = IRQ_NONE; - - port = NULL; - /* spin_lock(&gm_lock); */ - - for (i = 0; i < MXSER_BOARDS; i++) { - if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) { - port = dev_id; - break; - } - } - - if (i == MXSER_BOARDS) - goto irq_stop; - if (port == 0) - goto irq_stop; - max = mxser_numports[mxsercfg[i].board_type - 1]; - while (1) { - irqbits = inb(port->vector) & port->vectormask; - if (irqbits == port->vectormask) - break; - - handled = IRQ_HANDLED; - for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { - if (irqbits == port->vectormask) - break; - if (bits & irqbits) - continue; - info = port + i; - - /* following add by Victor Yu. 09-13-2002 */ - iir = inb(info->base + UART_IIR); - if (iir & UART_IIR_NO_INT) - continue; - iir &= MOXA_MUST_IIR_MASK; - if (!info->tty) { - status = inb(info->base + UART_LSR); - outb(0x27, info->base + UART_FCR); - inb(info->base + UART_MSR); - continue; - } - - /* mask by Victor Yu. 09-13-2002 - if ( !info->tty || - (inb(info->base + UART_IIR) & UART_IIR_NO_INT) ) - continue; - */ - /* mask by Victor Yu. 09-02-2002 - status = inb(info->base + UART_LSR) & info->read_status_mask; - */ - - /* following add by Victor Yu. 09-02-2002 */ - status = inb(info->base + UART_LSR); - - if (status & UART_LSR_PE) - info->err_shadow |= NPPI_NOTIFY_PARITY; - if (status & UART_LSR_FE) - info->err_shadow |= NPPI_NOTIFY_FRAMING; - if (status & UART_LSR_OE) - info->err_shadow |= NPPI_NOTIFY_HW_OVERRUN; - if (status & UART_LSR_BI) - info->err_shadow |= NPPI_NOTIFY_BREAK; - - if (info->IsMoxaMustChipFlag) { - /* - if ( (status & 0x02) && !(status & 0x01) ) { - outb(info->base+UART_FCR, 0x23); - continue; - } - */ - if (iir == MOXA_MUST_IIR_GDA || - iir == MOXA_MUST_IIR_RDA || - iir == MOXA_MUST_IIR_RTO || - iir == MOXA_MUST_IIR_LSR) - mxser_receive_chars(info, &status); - - } else { - /* above add by Victor Yu. 09-02-2002 */ - - status &= info->read_status_mask; - if (status & UART_LSR_DR) - mxser_receive_chars(info, &status); - } - msr = inb(info->base + UART_MSR); - if (msr & UART_MSR_ANY_DELTA) { - mxser_check_modem_status(info, msr); - } - /* following add by Victor Yu. 09-13-2002 */ - if (info->IsMoxaMustChipFlag) { - if ((iir == 0x02) && (status & UART_LSR_THRE)) { - mxser_transmit_chars(info); - } - } else { - /* above add by Victor Yu. 09-13-2002 */ - - if (status & UART_LSR_THRE) { -/* 8-2-99 by William - if ( info->x_char || (info->xmit_cnt > 0) ) -*/ - mxser_transmit_chars(info); - } - } - } - if (pass_counter++ > MXSER_ISR_PASS_LIMIT) { - break; /* Prevent infinite loops */ - } - } - - irq_stop: - /* spin_unlock(&gm_lock); */ - return handled; -} - -static void mxser_receive_chars(struct mxser_struct *info, int *status) -{ - struct tty_struct *tty = info->tty; + struct tty_struct *tty = port->tty; unsigned char ch, gdl; int ignored = 0; int cnt = 0; int recv_room; int max = 256; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); recv_room = tty->receive_room; - if ((recv_room == 0) && (!info->ldisc_stop_rx)) { - /* mxser_throttle(tty); */ + if ((recv_room == 0) && (!port->ldisc_stop_rx)) mxser_stoprx(tty); - /* return; */ - } - /* following add by Victor Yu. 09-02-2002 */ - if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) { + if (port->board->chip_flag != MOXA_OTHER_UART) { - if (*status & UART_LSR_SPECIAL) { + if (*status & UART_LSR_SPECIAL) goto intr_old; - } - /* following add by Victor Yu. 02-11-2004 */ - if (info->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID && + if (port->board->chip_flag == MOXA_MUST_MU860_HWID && (*status & MOXA_MUST_LSR_RERR)) goto intr_old; - /* above add by Victor Yu. 02-14-2004 */ if (*status & MOXA_MUST_LSR_RERR) goto intr_old; - gdl = inb(info->base + MOXA_MUST_GDL_REGISTER); + gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); - /* add by Victor Yu. 02-11-2004 */ - if (info->IsMoxaMustChipFlag == MOXA_MUST_MU150_HWID) + if (port->board->chip_flag == MOXA_MUST_MU150_HWID) gdl &= MOXA_MUST_GDL_MASK; if (gdl >= recv_room) { - if (!info->ldisc_stop_rx) { - /* mxser_throttle(tty); */ + if (!port->ldisc_stop_rx) mxser_stoprx(tty); - } - /* return; */ } while (gdl--) { - ch = inb(info->base + UART_RX); + ch = inb(port->ioaddr + UART_RX); tty_insert_flip_char(tty, ch, 0); cnt++; - /* - if ((cnt >= HI_WATER) && (info->stop_rx == 0)) { - mxser_stoprx(tty); - info->stop_rx = 1; - break; - } */ } goto end_intr; } - intr_old: - /* above add by Victor Yu. 09-02-2002 */ +intr_old: do { if (max-- < 0) break; - /* - if ((cnt >= HI_WATER) && (info->stop_rx == 0)) { - mxser_stoprx(tty); - info->stop_rx=1; - break; - } - */ - ch = inb(info->base + UART_RX); - /* following add by Victor Yu. 09-02-2002 */ - if (info->IsMoxaMustChipFlag && (*status & UART_LSR_OE) /*&& !(*status&UART_LSR_DR) */ ) - outb(0x23, info->base + UART_FCR); - *status &= info->read_status_mask; - /* above add by Victor Yu. 09-02-2002 */ - if (*status & info->ignore_status_mask) { + ch = inb(port->ioaddr + UART_RX); + if (port->board->chip_flag && (*status & UART_LSR_OE)) + outb(0x23, port->ioaddr + UART_FCR); + *status &= port->read_status_mask; + if (*status & port->ignore_status_mask) { if (++ignored > 100) break; } else { @@ -2096,1038 +2086,652 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status) if (*status & UART_LSR_SPECIAL) { if (*status & UART_LSR_BI) { flag = TTY_BREAK; -/* added by casper 1/11/2000 */ - info->icount.brk++; -/* */ - if (info->flags & ASYNC_SAK) + port->icount.brk++; + + if (port->flags & ASYNC_SAK) do_SAK(tty); } else if (*status & UART_LSR_PE) { flag = TTY_PARITY; -/* added by casper 1/11/2000 */ - info->icount.parity++; -/* */ + port->icount.parity++; } else if (*status & UART_LSR_FE) { flag = TTY_FRAME; -/* added by casper 1/11/2000 */ - info->icount.frame++; -/* */ + port->icount.frame++; } else if (*status & UART_LSR_OE) { flag = TTY_OVERRUN; -/* added by casper 1/11/2000 */ - info->icount.overrun++; -/* */ - } + port->icount.overrun++; + } else + flag = TTY_BREAK; } tty_insert_flip_char(tty, ch, flag); cnt++; if (cnt >= recv_room) { - if (!info->ldisc_stop_rx) { - /* mxser_throttle(tty); */ + if (!port->ldisc_stop_rx) mxser_stoprx(tty); - } break; } } - /* following add by Victor Yu. 09-02-2002 */ - if (info->IsMoxaMustChipFlag) + if (port->board->chip_flag) break; - /* above add by Victor Yu. 09-02-2002 */ - /* mask by Victor Yu. 09-02-2002 - *status = inb(info->base + UART_LSR) & info->read_status_mask; - */ - /* following add by Victor Yu. 09-02-2002 */ - *status = inb(info->base + UART_LSR); - /* above add by Victor Yu. 09-02-2002 */ + *status = inb(port->ioaddr + UART_LSR); } while (*status & UART_LSR_DR); -end_intr: /* add by Victor Yu. 09-02-2002 */ - mxvar_log.rxcnt[info->port] += cnt; - info->mon_data.rxcnt += cnt; - info->mon_data.up_rxcnt += cnt; - spin_unlock_irqrestore(&info->slock, flags); +end_intr: + mxvar_log.rxcnt[port->tty->index] += cnt; + port->mon_data.rxcnt += cnt; + port->mon_data.up_rxcnt += cnt; + /* + * We are called from an interrupt context with &port->slock + * being held. Drop it temporarily in order to prevent + * recursive locking. + */ + spin_unlock(&port->slock); tty_flip_buffer_push(tty); + spin_lock(&port->slock); } -static void mxser_transmit_chars(struct mxser_struct *info) +static void mxser_transmit_chars(struct mxser_port *port) { int count, cnt; - unsigned long flags; - spin_lock_irqsave(&info->slock, flags); - - if (info->x_char) { - outb(info->x_char, info->base + UART_TX); - info->x_char = 0; - mxvar_log.txcnt[info->port]++; - info->mon_data.txcnt++; - info->mon_data.up_txcnt++; - -/* added by casper 1/11/2000 */ - info->icount.tx++; -/* */ - spin_unlock_irqrestore(&info->slock, flags); + if (port->x_char) { + outb(port->x_char, port->ioaddr + UART_TX); + port->x_char = 0; + mxvar_log.txcnt[port->tty->index]++; + port->mon_data.txcnt++; + port->mon_data.up_txcnt++; + port->icount.tx++; return; } - if (info->xmit_buf == 0) { - spin_unlock_irqrestore(&info->slock, flags); + if (port->xmit_buf == NULL) return; - } - if ((info->xmit_cnt <= 0) || info->tty->stopped || - (info->tty->hw_stopped && - (info->type != PORT_16550A) && - (!info->IsMoxaMustChipFlag))) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); + if ((port->xmit_cnt <= 0) || port->tty->stopped || + (port->tty->hw_stopped && + (port->type != PORT_16550A) && + (!port->board->chip_flag))) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + UART_IER); return; } - cnt = info->xmit_cnt; - count = info->xmit_fifo_size; + cnt = port->xmit_cnt; + count = port->xmit_fifo_size; do { - outb(info->xmit_buf[info->xmit_tail++], - info->base + UART_TX); - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE - 1); - if (--info->xmit_cnt <= 0) + outb(port->xmit_buf[port->xmit_tail++], + port->ioaddr + UART_TX); + port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1); + if (--port->xmit_cnt <= 0) break; } while (--count > 0); - mxvar_log.txcnt[info->port] += (cnt - info->xmit_cnt); + mxvar_log.txcnt[port->tty->index] += (cnt - port->xmit_cnt); -/* added by James 03-12-2004. */ - info->mon_data.txcnt += (cnt - info->xmit_cnt); - info->mon_data.up_txcnt += (cnt - info->xmit_cnt); -/* (above) added by James. */ + port->mon_data.txcnt += (cnt - port->xmit_cnt); + port->mon_data.up_txcnt += (cnt - port->xmit_cnt); + port->icount.tx += (cnt - port->xmit_cnt); -/* added by casper 1/11/2000 */ - info->icount.tx += (cnt - info->xmit_cnt); -/* */ + if (port->xmit_cnt < WAKEUP_CHARS) + tty_wakeup(port->tty); - if (info->xmit_cnt < WAKEUP_CHARS) { - set_bit(MXSER_EVENT_TXLOW, &info->event); - schedule_work(&info->tqueue); + if (port->xmit_cnt <= 0) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + UART_IER); } - if (info->xmit_cnt <= 0) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); } -static void mxser_check_modem_status(struct mxser_struct *info, int status) +/* + * This is the serial driver's generic interrupt routine + */ +static irqreturn_t mxser_interrupt(int irq, void *dev_id) { - /* update input line counters */ - if (status & UART_MSR_TERI) - info->icount.rng++; - if (status & UART_MSR_DDSR) - info->icount.dsr++; - if (status & UART_MSR_DDCD) - info->icount.dcd++; - if (status & UART_MSR_DCTS) - info->icount.cts++; - info->mon_data.modem_status = status; - wake_up_interruptible(&info->delta_msr_wait); - - if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { - if (status & UART_MSR_DCD) - wake_up_interruptible(&info->open_wait); - schedule_work(&info->tqueue); - } - - if (info->flags & ASYNC_CTS_FLOW) { - if (info->tty->hw_stopped) { - if (status & UART_MSR_CTS) { - info->tty->hw_stopped = 0; + int status, iir, i; + struct mxser_board *brd = NULL; + struct mxser_port *port; + int max, irqbits, bits, msr; + unsigned int int_cnt, pass_counter = 0; + int handled = IRQ_NONE; - if ((info->type != PORT_16550A) && - (!info->IsMoxaMustChipFlag)) { - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - set_bit(MXSER_EVENT_TXLOW, &info->event); - schedule_work(&info->tqueue); } - } else { - if (!(status & UART_MSR_CTS)) { - info->tty->hw_stopped = 1; - if ((info->type != PORT_16550A) && - (!info->IsMoxaMustChipFlag)) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - } + for (i = 0; i < MXSER_BOARDS; i++) + if (dev_id == &mxser_boards[i]) { + brd = dev_id; + break; } - } -} -static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, struct mxser_struct *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - unsigned long flags; - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } + if (i == MXSER_BOARDS) + goto irq_stop; + if (brd == NULL) + goto irq_stop; + max = brd->info->nports; + while (pass_counter++ < MXSER_ISR_PASS_LIMIT) { + irqbits = inb(brd->vector) & brd->vector_mask; + if (irqbits == brd->vector_mask) + break; - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; + handled = IRQ_HANDLED; + for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { + if (irqbits == brd->vector_mask) + break; + if (bits & irqbits) + continue; + port = &brd->ports[i]; + + int_cnt = 0; + spin_lock(&port->slock); + do { + iir = inb(port->ioaddr + UART_IIR); + if (iir & UART_IIR_NO_INT) + break; + iir &= MOXA_MUST_IIR_MASK; + if (!port->tty || + (port->flags & ASYNC_CLOSING) || + !(port->flags & + ASYNC_INITIALIZED)) { + status = inb(port->ioaddr + UART_LSR); + outb(0x27, port->ioaddr + UART_FCR); + inb(port->ioaddr + UART_MSR); + break; + } - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * mxser_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); + status = inb(port->ioaddr + UART_LSR); + + if (status & UART_LSR_PE) + port->err_shadow |= NPPI_NOTIFY_PARITY; + if (status & UART_LSR_FE) + port->err_shadow |= NPPI_NOTIFY_FRAMING; + if (status & UART_LSR_OE) + port->err_shadow |= + NPPI_NOTIFY_HW_OVERRUN; + if (status & UART_LSR_BI) + port->err_shadow |= NPPI_NOTIFY_BREAK; + + if (port->board->chip_flag) { + if (iir == MOXA_MUST_IIR_GDA || + iir == MOXA_MUST_IIR_RDA || + iir == MOXA_MUST_IIR_RTO || + iir == MOXA_MUST_IIR_LSR) + mxser_receive_chars(port, + &status); - spin_lock_irqsave(&info->slock, flags); - if (!tty_hung_up_p(filp)) - info->count--; - spin_unlock_irqrestore(&info->slock, flags); - info->blocked_open++; - while (1) { - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->base + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)) { - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(info->flags & ASYNC_CLOSING) && - (do_clocal || - (inb(info->base + UART_MSR) & UART_MSR_DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; + } else { + status &= port->read_status_mask; + if (status & UART_LSR_DR) + mxser_receive_chars(port, + &status); + } + msr = inb(port->ioaddr + UART_MSR); + if (msr & UART_MSR_ANY_DELTA) + mxser_check_modem_status(port, msr); + + if (port->board->chip_flag) { + if (iir == 0x02 && (status & + UART_LSR_THRE)) + mxser_transmit_chars(port); + } else { + if (status & UART_LSR_THRE) + mxser_transmit_chars(port); + } + } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); + spin_unlock(&port->slock); } - schedule(); } - set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)) - info->count++; - info->blocked_open--; - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} -static int mxser_startup(struct mxser_struct *info) -{ - unsigned long page; - unsigned long flags; - - page = __get_free_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - spin_lock_irqsave(&info->slock, flags); - - if (info->flags & ASYNC_INITIALIZED) { - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } +irq_stop: + return handled; +} - if (!info->base || !info->type) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } - if (info->xmit_buf) - free_page(page); - else - info->xmit_buf = (unsigned char *) page; +static const struct tty_operations mxser_ops = { + .open = mxser_open, + .close = mxser_close, + .write = mxser_write, + .put_char = mxser_put_char, + .flush_chars = mxser_flush_chars, + .write_room = mxser_write_room, + .chars_in_buffer = mxser_chars_in_buffer, + .flush_buffer = mxser_flush_buffer, + .ioctl = mxser_ioctl, + .throttle = mxser_throttle, + .unthrottle = mxser_unthrottle, + .set_termios = mxser_set_termios, + .stop = mxser_stop, + .start = mxser_start, + .hangup = mxser_hangup, + .break_ctl = mxser_rs_break, + .wait_until_sent = mxser_wait_until_sent, + .tiocmget = mxser_tiocmget, + .tiocmset = mxser_tiocmset, +}; - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in mxser_change_speed()) - */ - if (info->IsMoxaMustChipFlag) - outb((UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR); - else - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->base + UART_FCR); +/* + * The MOXA Smartio/Industio serial driver boot-time initialization code! + */ - /* - * At this point there's no way the LSR could still be 0xFF; - * if it is, then bail out, because there's likely no UART - * here. - */ - if (inb(info->base + UART_LSR) == 0xff) { - spin_unlock_irqrestore(&info->slock, flags); - if (capable(CAP_SYS_ADMIN)) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - return 0; - } else - return -ENODEV; +static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev, + unsigned int irq) +{ + if (irq) + free_irq(brd->irq, brd); + if (pdev != NULL) { /* PCI */ +#ifdef CONFIG_PCI + pci_release_region(pdev, 2); + pci_release_region(pdev, 3); +#endif + } else { + release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); + release_region(brd->vector, 1); } - - /* - * Clear the interrupt registers. - */ - (void) inb(info->base + UART_LSR); - (void) inb(info->base + UART_RX); - (void) inb(info->base + UART_IIR); - (void) inb(info->base + UART_MSR); - - /* - * Now, initialize the UART - */ - outb(UART_LCR_WLEN8, info->base + UART_LCR); /* reset DLAB */ - info->MCR = UART_MCR_DTR | UART_MCR_RTS; - outb(info->MCR, info->base + UART_MCR); - - /* - * Finally, enable interrupts - */ - info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; - /* info->IER = UART_IER_RLSI | UART_IER_RDI; */ - - /* following add by Victor Yu. 08-30-2002 */ - if (info->IsMoxaMustChipFlag) - info->IER |= MOXA_MUST_IER_EGDAI; - /* above add by Victor Yu. 08-30-2002 */ - outb(info->IER, info->base + UART_IER); /* enable interrupts */ - - /* - * And clear the interrupt registers again for luck. - */ - (void) inb(info->base + UART_LSR); - (void) inb(info->base + UART_RX); - (void) inb(info->base + UART_IIR); - (void) inb(info->base + UART_MSR); - - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - /* - * and set the speed of the serial port - */ - spin_unlock_irqrestore(&info->slock, flags); - mxser_change_speed(info, NULL); - - info->flags |= ASYNC_INITIALIZED; - return 0; } -/* - * This routine will shutdown a serial port; interrupts maybe disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void mxser_shutdown(struct mxser_struct *info) +static int __devinit mxser_initbrd(struct mxser_board *brd, + struct pci_dev *pdev) { - unsigned long flags; - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - - spin_lock_irqsave(&info->slock, flags); - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free the irq - * here so the queue might never be waken up - */ - wake_up_interruptible(&info->delta_msr_wait); - - /* - * Free the IRQ, if necessary - */ - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; - } + struct mxser_port *info; + unsigned int i; + int retval; - info->IER = 0; - outb(0x00, info->base + UART_IER); + printk(KERN_INFO "max. baud rate = %d bps.\n", brd->ports[0].max_baud); - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) - info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); - outb(info->MCR, info->base + UART_MCR); + for (i = 0; i < brd->info->nports; i++) { + info = &brd->ports[i]; + info->board = brd; + info->stop_rx = 0; + info->ldisc_stop_rx = 0; - /* clear Rx/Tx FIFO's */ - /* following add by Victor Yu. 08-30-2002 */ - if (info->IsMoxaMustChipFlag) - outb((UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR); - else - /* above add by Victor Yu. 08-30-2002 */ - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->base + UART_FCR); + /* Enhance mode enabled here */ + if (brd->chip_flag != MOXA_OTHER_UART) + ENABLE_MOXA_MUST_ENCHANCE_MODE(info->ioaddr); - /* read data port to reset things */ - (void) inb(info->base + UART_RX); + info->flags = ASYNC_SHARE_IRQ; + info->type = brd->uart_type; - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + process_txrx_fifo(info); - info->flags &= ~ASYNC_INITIALIZED; + info->custom_divisor = info->baud_base * 16; + info->close_delay = 5 * HZ / 10; + info->closing_wait = 30 * HZ; + info->normal_termios = mxvar_sdriver->init_termios; + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->delta_msr_wait); + memset(&info->mon_data, 0, sizeof(struct mxser_mon)); + info->err_shadow = 0; + spin_lock_init(&info->slock); - /* following add by Victor Yu. 09-23-2002 */ - if (info->IsMoxaMustChipFlag) - SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->base); - /* above add by Victor Yu. 09-23-2002 */ + /* before set INT ISR, disable all int */ + outb(inb(info->ioaddr + UART_IER) & 0xf0, + info->ioaddr + UART_IER); + } - spin_unlock_irqrestore(&info->slock, flags); + retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", + brd); + if (retval) { + printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may " + "conflict with another device.\n", + brd->info->name, brd->irq); + /* We hold resources, we need to release them. */ + mxser_release_res(brd, pdev, 0); + } + return retval; } -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static int mxser_change_speed(struct mxser_struct *info, struct ktermios *old_termios) +static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) { - unsigned cflag, cval, fcr; - int ret = 0; - unsigned char status; - long baud; - unsigned long flags; - - if (!info->tty || !info->tty->termios) - return ret; - cflag = info->tty->termios->c_cflag; - if (!(info->base)) - return ret; + int id, i, bits; + unsigned short regs[16], irq; + unsigned char scratch, scratch2; -#ifndef B921600 -#define B921600 (B460800 +1) -#endif - if (mxser_set_baud_method[info->port] == 0) { - baud = tty_get_baud_rate(info->tty); - mxser_set_baud(info, baud); - } + brd->chip_flag = MOXA_OTHER_UART; - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - cval = 0x00; + id = mxser_read_register(cap, regs); + switch (id) { + case C168_ASIC_ID: + brd->info = &mxser_cards[0]; break; - case CS6: - cval = 0x01; + case C104_ASIC_ID: + brd->info = &mxser_cards[1]; break; - case CS7: - cval = 0x02; + case CI104J_ASIC_ID: + brd->info = &mxser_cards[2]; break; - case CS8: - cval = 0x03; + case C102_ASIC_ID: + brd->info = &mxser_cards[5]; + break; + case CI132_ASIC_ID: + brd->info = &mxser_cards[6]; + break; + case CI134_ASIC_ID: + brd->info = &mxser_cards[7]; break; default: - cval = 0x00; - break; /* too keep GCC shut... */ + return 0; } - if (cflag & CSTOPB) - cval |= 0x04; - if (cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; - if ((info->type == PORT_8250) || (info->type == PORT_16450)) { - if (info->IsMoxaMustChipFlag) { - fcr = UART_FCR_ENABLE_FIFO; - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - SET_MOXA_MUST_FIFO_VALUE(info); - } else - fcr = 0; - } else { - fcr = UART_FCR_ENABLE_FIFO; - /* following add by Victor Yu. 08-30-2002 */ - if (info->IsMoxaMustChipFlag) { - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - SET_MOXA_MUST_FIFO_VALUE(info); - } else { - /* above add by Victor Yu. 08-30-2002 */ - switch (info->rx_trigger) { - case 1: - fcr |= UART_FCR_TRIGGER_1; - break; - case 4: - fcr |= UART_FCR_TRIGGER_4; - break; - case 8: - fcr |= UART_FCR_TRIGGER_8; - break; - default: - fcr |= UART_FCR_TRIGGER_14; - break; - } - } + irq = 0; + /* some ISA cards have 2 ports, but we want to see them as 4-port (why?) + Flag-hack checks if configuration should be read as 2-port here. */ + if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + if (irq != (regs[9] & 0xFF00)) + return MXSER_ERR_IRQ_CONFLIT; + } else if (brd->info->nports == 4) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + irq = irq | (irq >> 8); + if (irq != regs[9]) + return MXSER_ERR_IRQ_CONFLIT; + } else if (brd->info->nports == 8) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + irq = irq | (irq >> 8); + if ((irq != regs[9]) || (irq != regs[10])) + return MXSER_ERR_IRQ_CONFLIT; } - /* CTS flow control flag and modem status interrupts */ - info->IER &= ~UART_IER_MSI; - info->MCR &= ~UART_MCR_AFE; - if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; - info->IER |= UART_IER_MSI; - if ((info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) { - info->MCR |= UART_MCR_AFE; + if (!irq) + return MXSER_ERR_IRQ; + brd->irq = ((int)(irq & 0xF000) >> 12); + for (i = 0; i < 8; i++) + brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8; + if ((regs[12] & 0x80) == 0) + return MXSER_ERR_VECTOR; + brd->vector = (int)regs[11]; /* interrupt vector */ + if (id == 1) + brd->vector_mask = 0x00FF; + else + brd->vector_mask = 0x000F; + for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { + if (regs[12] & bits) { + brd->ports[i].baud_base = 921600; + brd->ports[i].max_baud = 921600; } else { - status = inb(info->base + UART_MSR); - if (info->tty->hw_stopped) { - if (status & UART_MSR_CTS) { - info->tty->hw_stopped = 0; - if ((info->type != PORT_16550A) && - (!info->IsMoxaMustChipFlag)) { - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - set_bit(MXSER_EVENT_TXLOW, &info->event); - schedule_work(&info->tqueue); } - } else { - if (!(status & UART_MSR_CTS)) { - info->tty->hw_stopped = 1; - if ((info->type != PORT_16550A) && - (!info->IsMoxaMustChipFlag)) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - } - } + brd->ports[i].baud_base = 115200; + brd->ports[i].max_baud = 115200; } - } else { - info->flags &= ~ASYNC_CTS_FLOW; - } - outb(info->MCR, info->base + UART_MCR); - if (cflag & CLOCAL) { - info->flags &= ~ASYNC_CHECK_CD; - } else { - info->flags |= ASYNC_CHECK_CD; - info->IER |= UART_IER_MSI; } - outb(info->IER, info->base + UART_IER); - - /* - * Set up parity check flag - */ - info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (I_INPCK(info->tty)) - info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) - info->read_status_mask |= UART_LSR_BI; - - info->ignore_status_mask = 0; + scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); + outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); + outb(0, cap + UART_EFR); /* EFR is the same as FCR */ + outb(scratch2, cap + UART_LCR); + outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); + scratch = inb(cap + UART_IIR); - if (I_IGNBRK(info->tty)) { - info->ignore_status_mask |= UART_LSR_BI; - info->read_status_mask |= UART_LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->tty)) { - info->ignore_status_mask |= - UART_LSR_OE | - UART_LSR_PE | - UART_LSR_FE; - info->read_status_mask |= - UART_LSR_OE | - UART_LSR_PE | - UART_LSR_FE; - } - } - /* following add by Victor Yu. 09-02-2002 */ - if (info->IsMoxaMustChipFlag) { - spin_lock_irqsave(&info->slock, flags); - SET_MOXA_MUST_XON1_VALUE(info->base, START_CHAR(info->tty)); - SET_MOXA_MUST_XOFF1_VALUE(info->base, STOP_CHAR(info->tty)); - if (I_IXON(info->tty)) { - ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); - } else { - DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); - } - if (I_IXOFF(info->tty)) { - ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base); - } else { - DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base); - } - /* - if ( I_IXANY(info->tty) ) { - info->MCR |= MOXA_MUST_MCR_XON_ANY; - ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base); - } else { - info->MCR &= ~MOXA_MUST_MCR_XON_ANY; - DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base); - } - */ - spin_unlock_irqrestore(&info->slock, flags); + if (scratch & 0xC0) + brd->uart_type = PORT_16550A; + else + brd->uart_type = PORT_16450; + if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports, + "mxser(IO)")) + return MXSER_ERR_IOADDR; + if (!request_region(brd->vector, 1, "mxser(vector)")) { + release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); + return MXSER_ERR_VECTOR; } - /* above add by Victor Yu. 09-02-2002 */ - - - outb(fcr, info->base + UART_FCR); /* set fcr */ - outb(cval, info->base + UART_LCR); - - return ret; + return brd->info->nports; } - -static int mxser_set_baud(struct mxser_struct *info, long newspd) +static int __devinit mxser_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { - int quot = 0; - unsigned char cval; - int ret = 0; - unsigned long flags; - - if (!info->tty || !info->tty->termios) - return ret; - - if (!(info->base)) - return ret; +#ifdef CONFIG_PCI + struct mxser_board *brd; + unsigned int i, j; + unsigned long ioaddress; + int retval = -EINVAL; - if (newspd > info->MaxCanSetBaudRate) - return 0; + for (i = 0; i < MXSER_BOARDS; i++) + if (mxser_boards[i].info == NULL) + break; - info->realbaud = newspd; - if (newspd == 134) { - quot = (2 * info->baud_base / 269); - } else if (newspd) { - quot = info->baud_base / newspd; - if (quot == 0) - quot = 1; - } else { - quot = 0; + if (i >= MXSER_BOARDS) { + printk(KERN_ERR "Too many Smartio/Industio family boards found " + "(maximum %d), board not configured\n", MXSER_BOARDS); + goto err; } - info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); - info->timeout += HZ / 50; /* Add .02 seconds of slop */ + brd = &mxser_boards[i]; + brd->idx = i * MXSER_PORTS_PER_BOARD; + printk(KERN_INFO "Found MOXA %s board (BusNo=%d, DevNo=%d)\n", + mxser_cards[ent->driver_data].name, + pdev->bus->number, PCI_SLOT(pdev->devfn)); - if (quot) { - spin_lock_irqsave(&info->slock, flags); - info->MCR |= UART_MCR_DTR; - outb(info->MCR, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - } else { - spin_lock_irqsave(&info->slock, flags); - info->MCR &= ~UART_MCR_DTR; - outb(info->MCR, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - return ret; + retval = pci_enable_device(pdev); + if (retval) { + printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n"); + goto err; } - cval = inb(info->base + UART_LCR); - - outb(cval | UART_LCR_DLAB, info->base + UART_LCR); /* set DLAB */ - - outb(quot & 0xff, info->base + UART_DLL); /* LS of divisor */ - outb(quot >> 8, info->base + UART_DLM); /* MS of divisor */ - outb(cval, info->base + UART_LCR); /* reset DLAB */ - + /* io address */ + ioaddress = pci_resource_start(pdev, 2); + retval = pci_request_region(pdev, 2, "mxser(IO)"); + if (retval) + goto err; - return ret; -} + brd->info = &mxser_cards[ent->driver_data]; + for (i = 0; i < brd->info->nports; i++) + brd->ports[i].ioaddr = ioaddress + 8 * i; -/* - * ------------------------------------------------------------ - * friends of mxser_ioctl() - * ------------------------------------------------------------ - */ -static int mxser_get_serial_info(struct mxser_struct *info, struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; + /* vector */ + ioaddress = pci_resource_start(pdev, 3); + retval = pci_request_region(pdev, 3, "mxser(vector)"); + if (retval) + goto err_relio; + brd->vector = ioaddress; - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->port; - tmp.port = info->base; - tmp.irq = info->irq; - tmp.flags = info->flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - tmp.hub6 = 0; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} + /* irq */ + brd->irq = pdev->irq; -static int mxser_set_serial_info(struct mxser_struct *info, struct serial_struct __user *new_info) -{ - struct serial_struct new_serial; - unsigned int flags; - int retval = 0; + brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr); + brd->uart_type = PORT_16550A; + brd->vector_mask = 0; - if (!new_info || !info->base) - return -EFAULT; - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; + for (i = 0; i < brd->info->nports; i++) { + for (j = 0; j < UART_INFO_NUM; j++) { + if (Gpci_uart_info[j].type == brd->chip_flag) { + brd->ports[i].max_baud = + Gpci_uart_info[j].max_baud; - if ((new_serial.irq != info->irq) || - (new_serial.port != info->base) || - (new_serial.custom_divisor != info->custom_divisor) || - (new_serial.baud_base != info->baud_base)) - return -EPERM; + /* exception....CP-102 */ + if (brd->info->flags & MXSER_HIGHBAUD) + brd->ports[i].max_baud = 921600; + break; + } + } + } - flags = info->flags & ASYNC_SPD_MASK; + if (brd->chip_flag == MOXA_MUST_MU860_HWID) { + for (i = 0; i < brd->info->nports; i++) { + if (i < 4) + brd->ports[i].opmode_ioaddr = ioaddress + 4; + else + brd->ports[i].opmode_ioaddr = ioaddress + 0x0c; + } + outb(0, ioaddress + 4); /* default set to RS232 mode */ + outb(0, ioaddress + 0x0c); /* default set to RS232 mode */ + } - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != info->baud_base) || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - } else { - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - info->flags = ((info->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->close_delay = new_serial.close_delay * HZ / 100; - info->closing_wait = new_serial.closing_wait * HZ / 100; - info->tty->low_latency = - (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - info->tty->low_latency = 0; /* (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; */ + for (i = 0; i < brd->info->nports; i++) { + brd->vector_mask |= (1 << i); + brd->ports[i].baud_base = 921600; } - /* added by casper, 3/17/2000, for mouse */ - info->type = new_serial.type; + /* mxser_initbrd will hook ISR. */ + retval = mxser_initbrd(brd, pdev); + if (retval) + goto err_null; - process_txrx_fifo(info); + for (i = 0; i < brd->info->nports; i++) + tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev); - if (info->flags & ASYNC_INITIALIZED) { - if (flags != (info->flags & ASYNC_SPD_MASK)) { - mxser_change_speed(info, NULL); - } - } else { - retval = mxser_startup(info); - } + pci_set_drvdata(pdev, brd); + + return 0; +err_relio: + pci_release_region(pdev, 2); +err_null: + brd->info = NULL; +err: return retval; +#else + return -ENODEV; +#endif } -/* - * mxser_get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int mxser_get_lsr_info(struct mxser_struct *info, unsigned int __user *value) +static void __devexit mxser_remove(struct pci_dev *pdev) { - unsigned char status; - unsigned int result; - unsigned long flags; + struct mxser_board *brd = pci_get_drvdata(pdev); + unsigned int i; - spin_lock_irqsave(&info->slock, flags); - status = inb(info->base + UART_LSR); - spin_unlock_irqrestore(&info->slock, flags); - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result, value); -} + for (i = 0; i < brd->info->nports; i++) + tty_unregister_device(mxvar_sdriver, brd->idx + i); -/* - * This routine sends a break character out the serial port. - */ -static void mxser_send_break(struct mxser_struct *info, int duration) -{ - unsigned long flags; - - if (!info->base) - return; - set_current_state(TASK_INTERRUPTIBLE); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->base + UART_LCR) | UART_LCR_SBC, - info->base + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); - schedule_timeout(duration); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, - info->base + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); + mxser_release_res(brd, pdev, 1); + brd->info = NULL; } -static int mxser_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct mxser_struct *info = tty->driver_data; - unsigned char control, status; - unsigned long flags; +static struct pci_driver mxser_driver = { + .name = "mxser", + .id_table = mxser_pcibrds, + .probe = mxser_probe, + .remove = __devexit_p(mxser_remove) +}; +static int __init mxser_module_init(void) +{ + struct mxser_board *brd; + unsigned long cap; + unsigned int i, m, isaloop; + int retval, b; - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; + pr_debug("Loading module mxser ...\n"); - control = info->MCR; + mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); + if (!mxvar_sdriver) + return -ENOMEM; - spin_lock_irqsave(&info->slock, flags); - status = inb(info->base + UART_MSR); - if (status & UART_MSR_ANY_DELTA) - mxser_check_modem_status(info, status); - spin_unlock_irqrestore(&info->slock, flags); - return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | - ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | - ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | - ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | - ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | - ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -} + printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", + MXSER_VERSION); -static int mxser_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) -{ - struct mxser_struct *info = tty->driver_data; - unsigned long flags; + /* Initialize the tty_driver structure */ + mxvar_sdriver->owner = THIS_MODULE; + mxvar_sdriver->magic = TTY_DRIVER_MAGIC; + mxvar_sdriver->name = "ttyMI"; + mxvar_sdriver->major = ttymajor; + mxvar_sdriver->minor_start = 0; + mxvar_sdriver->num = MXSER_PORTS + 1; + mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; + mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; + mxvar_sdriver->init_termios = tty_std_termios; + mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; + mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(mxvar_sdriver, &mxser_ops); + retval = tty_register_driver(mxvar_sdriver); + if (retval) { + printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family " + "tty driver !\n"); + goto err_put; + } - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; + mxvar_diagflag = 0; - spin_lock_irqsave(&info->slock, flags); + m = 0; + /* Start finding ISA boards here */ + for (isaloop = 0; isaloop < 2; isaloop++) + for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { + if (!isaloop) + cap = mxserBoardCAP[b]; /* predefined */ + else + cap = ioaddr[b]; /* module param */ - if (set & TIOCM_RTS) - info->MCR |= UART_MCR_RTS; - if (set & TIOCM_DTR) - info->MCR |= UART_MCR_DTR; + if (!cap) + continue; - if (clear & TIOCM_RTS) - info->MCR &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~UART_MCR_DTR; + brd = &mxser_boards[m]; + retval = mxser_get_ISA_conf(cap, brd); - outb(info->MCR, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - return 0; -} + if (retval != 0) + printk(KERN_INFO "Found MOXA %s board " + "(CAP=0x%x)\n", + brd->info->name, ioaddr[b]); + if (retval <= 0) { + if (retval == MXSER_ERR_IRQ) + printk(KERN_ERR "Invalid interrupt " + "number, board not " + "configured\n"); + else if (retval == MXSER_ERR_IRQ_CONFLIT) + printk(KERN_ERR "Invalid interrupt " + "number, board not " + "configured\n"); + else if (retval == MXSER_ERR_VECTOR) + printk(KERN_ERR "Invalid interrupt " + "vector, board not " + "configured\n"); + else if (retval == MXSER_ERR_IOADDR) + printk(KERN_ERR "Invalid I/O address, " + "board not configured\n"); -static int mxser_read_register(int, unsigned short *); -static int mxser_program_mode(int); -static void mxser_normal_mode(int); + brd->info = NULL; + continue; + } -static int mxser_get_ISA_conf(int cap, struct mxser_hwconf *hwconf) -{ - int id, i, bits; - unsigned short regs[16], irq; - unsigned char scratch, scratch2; + /* mxser_initbrd will hook ISR. */ + if (mxser_initbrd(brd, NULL) < 0) { + brd->info = NULL; + continue; + } - hwconf->IsMoxaMustChipFlag = MOXA_OTHER_UART; + brd->idx = m * MXSER_PORTS_PER_BOARD; + for (i = 0; i < brd->info->nports; i++) + tty_register_device(mxvar_sdriver, brd->idx + i, + NULL); - id = mxser_read_register(cap, regs); - if (id == C168_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_C168_ISA; - hwconf->ports = 8; - } else if (id == C104_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_C104_ISA; - hwconf->ports = 4; - } else if (id == C102_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_C102_ISA; - hwconf->ports = 2; - } else if (id == CI132_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_CI132; - hwconf->ports = 2; - } else if (id == CI134_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_CI134; - hwconf->ports = 4; - } else if (id == CI104J_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_CI104J; - hwconf->ports = 4; - } else - return 0; + m++; + } - irq = 0; - if (hwconf->ports == 2) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - if (irq != (regs[9] & 0xFF00)) - return MXSER_ERR_IRQ_CONFLIT; - } else if (hwconf->ports == 4) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if (irq != regs[9]) - return MXSER_ERR_IRQ_CONFLIT; - } else if (hwconf->ports == 8) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if ((irq != regs[9]) || (irq != regs[10])) - return MXSER_ERR_IRQ_CONFLIT; + retval = pci_register_driver(&mxser_driver); + if (retval) { + printk(KERN_ERR "Can't register pci driver\n"); + if (!m) { + retval = -ENODEV; + goto err_unr; + } /* else: we have some ISA cards under control */ } - if (!irq) - return MXSER_ERR_IRQ; - hwconf->irq = ((int)(irq & 0xF000) >> 12); - for (i = 0; i < 8; i++) - hwconf->ioaddr[i] = (int) regs[i + 1] & 0xFFF8; - if ((regs[12] & 0x80) == 0) - return MXSER_ERR_VECTOR; - hwconf->vector = (int)regs[11]; /* interrupt vector */ - if (id == 1) - hwconf->vector_mask = 0x00FF; - else - hwconf->vector_mask = 0x000F; - for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { - if (regs[12] & bits) { - hwconf->baud_base[i] = 921600; - hwconf->MaxCanSetBaudRate[i] = 921600; /* add by Victor Yu. 09-04-2002 */ - } else { - hwconf->baud_base[i] = 115200; - hwconf->MaxCanSetBaudRate[i] = 115200; /* add by Victor Yu. 09-04-2002 */ - } - } - scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); - outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); - outb(0, cap + UART_EFR); /* EFR is the same as FCR */ - outb(scratch2, cap + UART_LCR); - outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); - scratch = inb(cap + UART_IIR); + pr_debug("Done.\n"); - if (scratch & 0xC0) - hwconf->uart_type = PORT_16550A; - else - hwconf->uart_type = PORT_16450; - if (id == 1) - hwconf->ports = 8; - else - hwconf->ports = 4; - request_region(hwconf->ioaddr[0], 8 * hwconf->ports, "mxser(IO)"); - request_region(hwconf->vector, 1, "mxser(vector)"); - return hwconf->ports; + return 0; +err_unr: + tty_unregister_driver(mxvar_sdriver); +err_put: + put_tty_driver(mxvar_sdriver); + return retval; } -#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ -#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ -#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ -#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ -#define EN_CCMD 0x000 /* Chip's command register */ -#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ -#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ -#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ -#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ -#define EN0_DCFG 0x00E /* Data configuration reg WR */ -#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ -#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ -#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ -static int mxser_read_register(int port, unsigned short *regs) +static void __exit mxser_module_exit(void) { - int i, k, value, id; - unsigned int j; - - id = mxser_program_mode(port); - if (id < 0) - return id; - for (i = 0; i < 14; i++) { - k = (i & 0x3F) | 0x180; - for (j = 0x100; j > 0; j >>= 1) { - outb(CHIP_CS, port); - if (k & j) { - outb(CHIP_CS | CHIP_DO, port); - outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ - } else { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ - } - } - (void)inb(port); - value = 0; - for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); - if (inb(port) & CHIP_DI) - value |= j; - } - regs[i] = value; - outb(0, port); - } - mxser_normal_mode(port); - return id; -} + unsigned int i, j; -static int mxser_program_mode(int port) -{ - int id, i, j, n; - /* unsigned long flags; */ + pr_debug("Unloading module mxser ...\n"); - spin_lock(&gm_lock); - outb(0, port); - outb(0, port); - outb(0, port); - (void)inb(port); - (void)inb(port); - outb(0, port); - (void)inb(port); - /* restore_flags(flags); */ - spin_unlock(&gm_lock); + pci_unregister_driver(&mxser_driver); - id = inb(port + 1) & 0x1F; - if ((id != C168_ASIC_ID) && - (id != C104_ASIC_ID) && - (id != C102_ASIC_ID) && - (id != CI132_ASIC_ID) && - (id != CI134_ASIC_ID) && - (id != CI104J_ASIC_ID)) - return -1; - for (i = 0, j = 0; i < 4; i++) { - n = inb(port + 2); - if (n == 'M') { - j = 1; - } else if ((j == 1) && (n == 1)) { - j = 2; - break; - } else - j = 0; - } - if (j != 2) - id = -2; - return id; -} + for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */ + if (mxser_boards[i].info != NULL) + for (j = 0; j < mxser_boards[i].info->nports; j++) + tty_unregister_device(mxvar_sdriver, + mxser_boards[i].idx + j); + tty_unregister_driver(mxvar_sdriver); + put_tty_driver(mxvar_sdriver); -static void mxser_normal_mode(int port) -{ - int i, n; + for (i = 0; i < MXSER_BOARDS; i++) + if (mxser_boards[i].info != NULL) + mxser_release_res(&mxser_boards[i], NULL, 1); - outb(0xA5, port + 1); - outb(0x80, port + 3); - outb(12, port + 0); /* 9600 bps */ - outb(0, port + 1); - outb(0x03, port + 3); /* 8 data bits */ - outb(0x13, port + 4); /* loop back mode */ - for (i = 0; i < 16; i++) { - n = inb(port + 5); - if ((n & 0x61) == 0x60) - break; - if ((n & 1) == 1) - (void)inb(port); - } - outb(0x00, port + 4); + pr_debug("Done.\n"); } module_init(mxser_module_init); diff --git a/drivers/char/mxser.h b/drivers/char/mxser.h index 1f4aa45ec00..84417111595 100644 --- a/drivers/char/mxser.h +++ b/drivers/char/mxser.h @@ -4,19 +4,17 @@ /* * Semi-public control interfaces */ - + /* * MOXA ioctls */ #define MOXA 0x400 #define MOXA_GETDATACOUNT (MOXA + 23) -#define MOXA_GET_CONF (MOXA + 35) #define MOXA_DIAGNOSE (MOXA + 50) #define MOXA_CHKPORTENABLE (MOXA + 60) #define MOXA_HighSpeedOn (MOXA + 61) #define MOXA_GET_MAJOR (MOXA + 63) -#define MOXA_GET_CUMAJOR (MOXA + 64) #define MOXA_GETMSTATUS (MOXA + 65) #define MOXA_SET_OP_MODE (MOXA + 66) #define MOXA_GET_OP_MODE (MOXA + 67) @@ -26,26 +24,14 @@ #define RS422_MODE 2 #define RS485_4WIRE_MODE 3 #define OP_MODE_MASK 3 -// above add by Victor Yu. 01-05-2004 - -#define TTY_THRESHOLD_THROTTLE 128 - -#define HI_WATER 768 - -// added by James. 03-11-2004. -#define MOXA_SDS_GETICOUNTER (MOXA + 68) -#define MOXA_SDS_RSTICOUNTER (MOXA + 69) -// (above) added by James. +#define MOXA_SDS_RSTICOUNTER (MOXA + 69) #define MOXA_ASPP_OQUEUE (MOXA + 70) -#define MOXA_ASPP_SETBAUD (MOXA + 71) -#define MOXA_ASPP_GETBAUD (MOXA + 72) #define MOXA_ASPP_MON (MOXA + 73) #define MOXA_ASPP_LSTATUS (MOXA + 74) #define MOXA_ASPP_MON_EXT (MOXA + 75) #define MOXA_SET_BAUD_METHOD (MOXA + 76) - /* --------------------------------------------------- */ #define NPPI_NOTIFY_PARITY 0x01 @@ -54,51 +40,46 @@ #define NPPI_NOTIFY_SW_OVERRUN 0x08 #define NPPI_NOTIFY_BREAK 0x10 -#define NPPI_NOTIFY_CTSHOLD 0x01 // Tx hold by CTS low -#define NPPI_NOTIFY_DSRHOLD 0x02 // Tx hold by DSR low -#define NPPI_NOTIFY_XOFFHOLD 0x08 // Tx hold by Xoff received -#define NPPI_NOTIFY_XOFFXENT 0x10 // Xoff Sent - -//CheckIsMoxaMust return value -#define MOXA_OTHER_UART 0x00 -#define MOXA_MUST_MU150_HWID 0x01 -#define MOXA_MUST_MU860_HWID 0x02 - -// follow just for Moxa Must chip define. -// -// when LCR register (offset 0x03) write following value, -// the Must chip will enter enchance mode. And write value -// on EFR (offset 0x02) bit 6,7 to change bank. +#define NPPI_NOTIFY_CTSHOLD 0x01 /* Tx hold by CTS low */ +#define NPPI_NOTIFY_DSRHOLD 0x02 /* Tx hold by DSR low */ +#define NPPI_NOTIFY_XOFFHOLD 0x08 /* Tx hold by Xoff received */ +#define NPPI_NOTIFY_XOFFXENT 0x10 /* Xoff Sent */ + +/* follow just for Moxa Must chip define. */ +/* */ +/* when LCR register (offset 0x03) write following value, */ +/* the Must chip will enter enchance mode. And write value */ +/* on EFR (offset 0x02) bit 6,7 to change bank. */ #define MOXA_MUST_ENTER_ENCHANCE 0xBF -// when enhance mode enable, access on general bank register +/* when enhance mode enable, access on general bank register */ #define MOXA_MUST_GDL_REGISTER 0x07 #define MOXA_MUST_GDL_MASK 0x7F #define MOXA_MUST_GDL_HAS_BAD_DATA 0x80 -#define MOXA_MUST_LSR_RERR 0x80 // error in receive FIFO -// enchance register bank select and enchance mode setting register -// when LCR register equal to 0xBF +#define MOXA_MUST_LSR_RERR 0x80 /* error in receive FIFO */ +/* enchance register bank select and enchance mode setting register */ +/* when LCR register equal to 0xBF */ #define MOXA_MUST_EFR_REGISTER 0x02 -// enchance mode enable +/* enchance mode enable */ #define MOXA_MUST_EFR_EFRB_ENABLE 0x10 -// enchance reister bank set 0, 1, 2 +/* enchance reister bank set 0, 1, 2 */ #define MOXA_MUST_EFR_BANK0 0x00 #define MOXA_MUST_EFR_BANK1 0x40 #define MOXA_MUST_EFR_BANK2 0x80 #define MOXA_MUST_EFR_BANK3 0xC0 #define MOXA_MUST_EFR_BANK_MASK 0xC0 -// set XON1 value register, when LCR=0xBF and change to bank0 +/* set XON1 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XON1_REGISTER 0x04 -// set XON2 value register, when LCR=0xBF and change to bank0 +/* set XON2 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XON2_REGISTER 0x05 -// set XOFF1 value register, when LCR=0xBF and change to bank0 +/* set XOFF1 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XOFF1_REGISTER 0x06 -// set XOFF2 value register, when LCR=0xBF and change to bank0 +/* set XOFF2 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XOFF2_REGISTER 0x07 #define MOXA_MUST_RBRTL_REGISTER 0x04 @@ -110,32 +91,32 @@ #define MOXA_MUST_ECR_REGISTER 0x06 #define MOXA_MUST_CSR_REGISTER 0x07 -// good data mode enable +/* good data mode enable */ #define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20 -// only good data put into RxFIFO +/* only good data put into RxFIFO */ #define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10 -// enable CTS interrupt +/* enable CTS interrupt */ #define MOXA_MUST_IER_ECTSI 0x80 -// enable RTS interrupt +/* enable RTS interrupt */ #define MOXA_MUST_IER_ERTSI 0x40 -// enable Xon/Xoff interrupt +/* enable Xon/Xoff interrupt */ #define MOXA_MUST_IER_XINT 0x20 -// enable GDA interrupt +/* enable GDA interrupt */ #define MOXA_MUST_IER_EGDAI 0x10 #define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI) -// GDA interrupt pending +/* GDA interrupt pending */ #define MOXA_MUST_IIR_GDA 0x1C #define MOXA_MUST_IIR_RDA 0x04 #define MOXA_MUST_IIR_RTO 0x0C #define MOXA_MUST_IIR_LSR 0x06 -// recieved Xon/Xoff or specical interrupt pending +/* recieved Xon/Xoff or specical interrupt pending */ #define MOXA_MUST_IIR_XSC 0x10 -// RTS/CTS change state interrupt pending +/* RTS/CTS change state interrupt pending */ #define MOXA_MUST_IIR_RTSCTS 0x20 #define MOXA_MUST_IIR_MASK 0x3E @@ -143,299 +124,164 @@ #define MOXA_MUST_MCR_XON_ANY 0x80 #define MOXA_MUST_MCR_TX_XON 0x08 - -// software flow control on chip mask value +/* software flow control on chip mask value */ #define MOXA_MUST_EFR_SF_MASK 0x0F -// send Xon1/Xoff1 +/* send Xon1/Xoff1 */ #define MOXA_MUST_EFR_SF_TX1 0x08 -// send Xon2/Xoff2 +/* send Xon2/Xoff2 */ #define MOXA_MUST_EFR_SF_TX2 0x04 -// send Xon1,Xon2/Xoff1,Xoff2 +/* send Xon1,Xon2/Xoff1,Xoff2 */ #define MOXA_MUST_EFR_SF_TX12 0x0C -// don't send Xon/Xoff +/* don't send Xon/Xoff */ #define MOXA_MUST_EFR_SF_TX_NO 0x00 -// Tx software flow control mask +/* Tx software flow control mask */ #define MOXA_MUST_EFR_SF_TX_MASK 0x0C -// don't receive Xon/Xoff +/* don't receive Xon/Xoff */ #define MOXA_MUST_EFR_SF_RX_NO 0x00 -// receive Xon1/Xoff1 +/* receive Xon1/Xoff1 */ #define MOXA_MUST_EFR_SF_RX1 0x02 -// receive Xon2/Xoff2 +/* receive Xon2/Xoff2 */ #define MOXA_MUST_EFR_SF_RX2 0x01 -// receive Xon1,Xon2/Xoff1,Xoff2 +/* receive Xon1,Xon2/Xoff1,Xoff2 */ #define MOXA_MUST_EFR_SF_RX12 0x03 -// Rx software flow control mask +/* Rx software flow control mask */ #define MOXA_MUST_EFR_SF_RX_MASK 0x03 -//#define MOXA_MUST_MIN_XOFFLIMIT 66 -//#define MOXA_MUST_MIN_XONLIMIT 20 -//#define ID1_RX_TRIG 120 - - -#define CHECK_MOXA_MUST_XOFFLIMIT(info) { \ - if ( (info)->IsMoxaMustChipFlag && \ - (info)->HandFlow.XoffLimit < MOXA_MUST_MIN_XOFFLIMIT ) { \ - (info)->HandFlow.XoffLimit = MOXA_MUST_MIN_XOFFLIMIT; \ - (info)->HandFlow.XonLimit = MOXA_MUST_MIN_XONLIMIT; \ - } \ -} - -#define ENABLE_MOXA_MUST_ENCHANCE_MODE(baseio) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ +#define ENABLE_MOXA_MUST_ENCHANCE_MODE(baseio) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((baseio)+UART_LCR); \ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr |= MOXA_MUST_EFR_EFRB_ENABLE; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define DISABLE_MOXA_MUST_ENCHANCE_MODE(baseio) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ + __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr |= MOXA_MUST_EFR_EFRB_ENABLE; \ + outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ + outb(__oldlcr, (baseio)+UART_LCR); \ +} while (0) + +#define DISABLE_MOXA_MUST_ENCHANCE_MODE(baseio) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((baseio)+UART_LCR); \ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define SET_MOXA_MUST_XON1_VALUE(baseio, Value) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ + __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; \ + outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ + outb(__oldlcr, (baseio)+UART_LCR); \ +} while (0) + +#define SET_MOXA_MUST_XON1_VALUE(baseio, Value) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((baseio)+UART_LCR); \ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK0; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ + __efr |= MOXA_MUST_EFR_BANK0; \ + outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ outb((u8)(Value), (baseio)+MOXA_MUST_XON1_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} + outb(__oldlcr, (baseio)+UART_LCR); \ +} while (0) -#define SET_MOXA_MUST_XON2_VALUE(baseio, Value) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ +#define SET_MOXA_MUST_XOFF1_VALUE(baseio, Value) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((baseio)+UART_LCR); \ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK0; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb((u8)(Value), (baseio)+MOXA_MUST_XON2_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define SET_MOXA_MUST_XOFF1_VALUE(baseio, Value) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK0; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ + __efr |= MOXA_MUST_EFR_BANK0; \ + outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ outb((u8)(Value), (baseio)+MOXA_MUST_XOFF1_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define SET_MOXA_MUST_XOFF2_VALUE(baseio, Value) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK0; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb((u8)(Value), (baseio)+MOXA_MUST_XOFF2_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define SET_MOXA_MUST_RBRTL_VALUE(baseio, Value) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK1; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb((u8)(Value), (baseio)+MOXA_MUST_RBRTL_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define SET_MOXA_MUST_RBRTH_VALUE(baseio, Value) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK1; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb((u8)(Value), (baseio)+MOXA_MUST_RBRTH_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define SET_MOXA_MUST_RBRTI_VALUE(baseio, Value) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ + outb(__oldlcr, (baseio)+UART_LCR); \ +} while (0) + +#define SET_MOXA_MUST_FIFO_VALUE(info) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((info)->ioaddr+UART_LCR); \ + outb(MOXA_MUST_ENTER_ENCHANCE, (info)->ioaddr+UART_LCR);\ + __efr = inb((info)->ioaddr+MOXA_MUST_EFR_REGISTER); \ + __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ + __efr |= MOXA_MUST_EFR_BANK1; \ + outb(__efr, (info)->ioaddr+MOXA_MUST_EFR_REGISTER); \ + outb((u8)((info)->rx_high_water), (info)->ioaddr+ \ + MOXA_MUST_RBRTH_REGISTER); \ + outb((u8)((info)->rx_trigger), (info)->ioaddr+ \ + MOXA_MUST_RBRTI_REGISTER); \ + outb((u8)((info)->rx_low_water), (info)->ioaddr+ \ + MOXA_MUST_RBRTL_REGISTER); \ + outb(__oldlcr, (info)->ioaddr+UART_LCR); \ +} while (0) + +#define SET_MOXA_MUST_ENUM_VALUE(baseio, Value) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((baseio)+UART_LCR); \ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK1; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb((u8)(Value), (baseio)+MOXA_MUST_RBRTI_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define SET_MOXA_MUST_THRTL_VALUE(baseio, Value) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK1; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb((u8)(Value), (baseio)+MOXA_MUST_THRTL_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -//#define MOXA_MUST_RBRL_VALUE 4 -#define SET_MOXA_MUST_FIFO_VALUE(info) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((info)->base+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (info)->base+UART_LCR); \ - __efr = inb((info)->base+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK1; \ - outb(__efr, (info)->base+MOXA_MUST_EFR_REGISTER); \ - outb((u8)((info)->rx_high_water), (info)->base+MOXA_MUST_RBRTH_REGISTER); \ - outb((u8)((info)->rx_trigger), (info)->base+MOXA_MUST_RBRTI_REGISTER); \ - outb((u8)((info)->rx_low_water), (info)->base+MOXA_MUST_RBRTL_REGISTER); \ - outb(__oldlcr, (info)->base+UART_LCR); \ -} - - - -#define SET_MOXA_MUST_ENUM_VALUE(baseio, Value) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK2; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ + __efr |= MOXA_MUST_EFR_BANK2; \ + outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ outb((u8)(Value), (baseio)+MOXA_MUST_ENUM_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} + outb(__oldlcr, (baseio)+UART_LCR); \ +} while (0) -#define GET_MOXA_MUST_HARDWARE_ID(baseio, pId) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK2; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - *pId = inb((baseio)+MOXA_MUST_HWID_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(baseio) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_MASK; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define SET_MOXA_MUST_JUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_MASK; \ - __efr |= MOXA_MUST_EFR_SF_TX1; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ +#define GET_MOXA_MUST_HARDWARE_ID(baseio, pId) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((baseio)+UART_LCR); \ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \ - __efr |= MOXA_MUST_EFR_SF_TX1; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ + __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ + __efr |= MOXA_MUST_EFR_BANK2; \ + outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ + *pId = inb((baseio)+MOXA_MUST_HWID_REGISTER); \ + outb(__oldlcr, (baseio)+UART_LCR); \ +} while (0) + +#define SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(baseio) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((baseio)+UART_LCR); \ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define SET_MOXA_MUST_JUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ + __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr &= ~MOXA_MUST_EFR_SF_MASK; \ + outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ + outb(__oldlcr, (baseio)+UART_LCR); \ +} while (0) + +#define ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((baseio)+UART_LCR); \ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_MASK; \ - __efr |= MOXA_MUST_EFR_SF_RX1; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ + __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \ + __efr |= MOXA_MUST_EFR_SF_TX1; \ + outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ + outb(__oldlcr, (baseio)+UART_LCR); \ +} while (0) + +#define DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((baseio)+UART_LCR); \ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \ - __efr |= MOXA_MUST_EFR_SF_RX1; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ + __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \ + outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ + outb(__oldlcr, (baseio)+UART_LCR); \ +} while (0) + +#define ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((baseio)+UART_LCR); \ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define ENABLE_MOXA_MUST_TX_RX_SOFTWARE_FLOW_CONTROL(baseio) { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ + __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \ + __efr |= MOXA_MUST_EFR_SF_RX1; \ + outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ + outb(__oldlcr, (baseio)+UART_LCR); \ +} while (0) + +#define DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) do { \ + u8 __oldlcr, __efr; \ + __oldlcr = inb((baseio)+UART_LCR); \ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_MASK; \ - __efr |= (MOXA_MUST_EFR_SF_RX1|MOXA_MUST_EFR_SF_TX1); \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} - -#define ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(baseio) { \ - u8 __oldmcr; \ - __oldmcr = inb((baseio)+UART_MCR); \ - __oldmcr |= MOXA_MUST_MCR_XON_ANY; \ - outb(__oldmcr, (baseio)+UART_MCR); \ -} - -#define DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(baseio) { \ - u8 __oldmcr; \ - __oldmcr = inb((baseio)+UART_MCR); \ - __oldmcr &= ~MOXA_MUST_MCR_XON_ANY; \ - outb(__oldmcr, (baseio)+UART_MCR); \ -} - -#define READ_MOXA_MUST_GDL(baseio) inb((baseio)+MOXA_MUST_GDL_REGISTER) + __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ + __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \ + outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ + outb(__oldlcr, (baseio)+UART_LCR); \ +} while (0) #endif diff --git a/drivers/char/mxser_new.c b/drivers/char/mxser_new.c deleted file mode 100644 index 081c84c7b54..00000000000 --- a/drivers/char/mxser_new.c +++ /dev/null @@ -1,2817 +0,0 @@ -/* - * mxser.c -- MOXA Smartio/Industio family multiport serial driver. - * - * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com.tw). - * Copyright (C) 2006-2007 Jiri Slaby <jirislaby@gmail.com> - * - * This code is loosely based on the 1.8 moxa driver which is based on - * Linux serial driver, written by Linus Torvalds, Theodore T'so and - * others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox - * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com. - * - Fixed x86_64 cleanness - * - Fixed sleep with spinlock held in mxser_send_break - */ - -#include <linux/module.h> -#include <linux/autoconf.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/serial_reg.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/gfp.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/bitops.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> - -#include "mxser_new.h" - -#define MXSER_VERSION "2.0.2" /* 1.10 */ -#define MXSERMAJOR 174 -#define MXSERCUMAJOR 175 - -#define MXSER_BOARDS 4 /* Max. boards */ -#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ -#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) -#define MXSER_ISR_PASS_LIMIT 100 - -#define MXSER_ERR_IOADDR -1 -#define MXSER_ERR_IRQ -2 -#define MXSER_ERR_IRQ_CONFLIT -3 -#define MXSER_ERR_VECTOR -4 - -/*CheckIsMoxaMust return value*/ -#define MOXA_OTHER_UART 0x00 -#define MOXA_MUST_MU150_HWID 0x01 -#define MOXA_MUST_MU860_HWID 0x02 - -#define WAKEUP_CHARS 256 - -#define UART_MCR_AFE 0x20 -#define UART_LSR_SPECIAL 0x1E - -#define PCI_DEVICE_ID_CB108 0x1080 -#define PCI_DEVICE_ID_CB114 0x1142 -#define PCI_DEVICE_ID_CB134I 0x1341 -#define PCI_DEVICE_ID_CP138U 0x1380 -#define PCI_DEVICE_ID_POS104UL 0x1044 - - -#define C168_ASIC_ID 1 -#define C104_ASIC_ID 2 -#define C102_ASIC_ID 0xB -#define CI132_ASIC_ID 4 -#define CI134_ASIC_ID 3 -#define CI104J_ASIC_ID 5 - -#define MXSER_HIGHBAUD 1 -#define MXSER_HAS2 2 - -/* This is only for PCI */ -static const struct { - int type; - int tx_fifo; - int rx_fifo; - int xmit_fifo_size; - int rx_high_water; - int rx_trigger; - int rx_low_water; - long max_baud; -} Gpci_uart_info[] = { - {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, - {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, - {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} -}; -#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info) - -struct mxser_cardinfo { - unsigned int nports; - char *name; - unsigned int flags; -}; - -static const struct mxser_cardinfo mxser_cards[] = { -/* 0*/ { 8, "C168 series", }, - { 4, "C104 series", }, - { 4, "CI-104J series", }, - { 8, "C168H/PCI series", }, - { 4, "C104H/PCI series", }, -/* 5*/ { 4, "C102 series", MXSER_HAS2 }, /* C102-ISA */ - { 4, "CI-132 series", MXSER_HAS2 }, - { 4, "CI-134 series", }, - { 2, "CP-132 series", }, - { 4, "CP-114 series", }, -/*10*/ { 4, "CT-114 series", }, - { 2, "CP-102 series", MXSER_HIGHBAUD }, - { 4, "CP-104U series", }, - { 8, "CP-168U series", }, - { 2, "CP-132U series", }, -/*15*/ { 4, "CP-134U series", }, - { 4, "CP-104JU series", }, - { 8, "Moxa UC7000 Serial", }, /* RC7000 */ - { 8, "CP-118U series", }, - { 2, "CP-102UL series", }, -/*20*/ { 2, "CP-102U series", }, - { 8, "CP-118EL series", }, - { 8, "CP-168EL series", }, - { 4, "CP-104EL series", }, - { 8, "CB-108 series", }, -/*25*/ { 4, "CB-114 series", }, - { 4, "CB-134I series", }, - { 8, "CP-138U series", }, - { 4, "POS-104UL series", } -}; - -/* driver_data correspond to the lines in the structure above - see also ISA probe function before you change something */ -static struct pci_device_id mxser_pcibrds[] = { - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 }, - { } -}; -MODULE_DEVICE_TABLE(pci, mxser_pcibrds); - -static int mxvar_baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, - 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 -}; -static unsigned int mxvar_baud_table1[] = { - 0, B50, B75, B110, B134, B150, B200, B300, B600, B1200, B1800, B2400, - B4800, B9600, B19200, B38400, B57600, B115200, B230400, B460800, B921600 -}; -#define BAUD_TABLE_NO ARRAY_SIZE(mxvar_baud_table) - -#define B_SPEC B2000000 - -static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 }; -static int ttymajor = MXSERMAJOR; -static int calloutmajor = MXSERCUMAJOR; - -/* Variables for insmod */ - -MODULE_AUTHOR("Casper Yang"); -MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); -module_param_array(ioaddr, int, NULL, 0); -module_param(ttymajor, int, 0); -MODULE_LICENSE("GPL"); - -struct mxser_log { - int tick; - unsigned long rxcnt[MXSER_PORTS]; - unsigned long txcnt[MXSER_PORTS]; -}; - - -struct mxser_mon { - unsigned long rxcnt; - unsigned long txcnt; - unsigned long up_rxcnt; - unsigned long up_txcnt; - int modem_status; - unsigned char hold_reason; -}; - -struct mxser_mon_ext { - unsigned long rx_cnt[32]; - unsigned long tx_cnt[32]; - unsigned long up_rxcnt[32]; - unsigned long up_txcnt[32]; - int modem_status[32]; - - long baudrate[32]; - int databits[32]; - int stopbits[32]; - int parity[32]; - int flowctrl[32]; - int fifo[32]; - int iftype[32]; -}; - -struct mxser_board; - -struct mxser_port { - struct mxser_board *board; - struct tty_struct *tty; - - unsigned long ioaddr; - unsigned long opmode_ioaddr; - int max_baud; - - int rx_high_water; - int rx_trigger; /* Rx fifo trigger level */ - int rx_low_water; - int baud_base; /* max. speed */ - long realbaud; - int type; /* UART type */ - int flags; /* defined in tty.h */ - int speed; - - int x_char; /* xon/xoff character */ - int IER; /* Interrupt Enable Register */ - int MCR; /* Modem control register */ - - unsigned char stop_rx; - unsigned char ldisc_stop_rx; - - int custom_divisor; - int close_delay; - unsigned short closing_wait; - unsigned char err_shadow; - unsigned long event; - - int count; /* # of fd on device */ - int blocked_open; /* # of blocked opens */ - struct async_icount icount; /* kernel counters for 4 input interrupts */ - int timeout; - - int read_status_mask; - int ignore_status_mask; - int xmit_fifo_size; - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - - struct ktermios normal_termios; - - struct mxser_mon mon_data; - - spinlock_t slock; - wait_queue_head_t open_wait; - wait_queue_head_t delta_msr_wait; -}; - -struct mxser_board { - unsigned int idx; - int irq; - const struct mxser_cardinfo *info; - unsigned long vector; - unsigned long vector_mask; - - int chip_flag; - int uart_type; - - struct mxser_port ports[MXSER_PORTS_PER_BOARD]; -}; - -struct mxser_mstatus { - tcflag_t cflag; - int cts; - int dsr; - int ri; - int dcd; -}; - -static struct mxser_mstatus GMStatus[MXSER_PORTS]; - -static int mxserBoardCAP[MXSER_BOARDS] = { - 0, 0, 0, 0 - /* 0x180, 0x280, 0x200, 0x320 */ -}; - -static struct mxser_board mxser_boards[MXSER_BOARDS]; -static struct tty_driver *mxvar_sdriver; -static struct mxser_log mxvar_log; -static int mxvar_diagflag; -static unsigned char mxser_msr[MXSER_PORTS + 1]; -static struct mxser_mon_ext mon_data_ext; -static int mxser_set_baud_method[MXSER_PORTS + 1]; - -#ifdef CONFIG_PCI -static int __devinit CheckIsMoxaMust(int io) -{ - u8 oldmcr, hwid; - int i; - - outb(0, io + UART_LCR); - DISABLE_MOXA_MUST_ENCHANCE_MODE(io); - oldmcr = inb(io + UART_MCR); - outb(0, io + UART_MCR); - SET_MOXA_MUST_XON1_VALUE(io, 0x11); - if ((hwid = inb(io + UART_MCR)) != 0) { - outb(oldmcr, io + UART_MCR); - return MOXA_OTHER_UART; - } - - GET_MOXA_MUST_HARDWARE_ID(io, &hwid); - for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */ - if (hwid == Gpci_uart_info[i].type) - return (int)hwid; - } - return MOXA_OTHER_UART; -} -#endif - -static void process_txrx_fifo(struct mxser_port *info) -{ - int i; - - if ((info->type == PORT_16450) || (info->type == PORT_8250)) { - info->rx_trigger = 1; - info->rx_high_water = 1; - info->rx_low_water = 1; - info->xmit_fifo_size = 1; - } else - for (i = 0; i < UART_INFO_NUM; i++) - if (info->board->chip_flag == Gpci_uart_info[i].type) { - info->rx_trigger = Gpci_uart_info[i].rx_trigger; - info->rx_low_water = Gpci_uart_info[i].rx_low_water; - info->rx_high_water = Gpci_uart_info[i].rx_high_water; - info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; - break; - } -} - -static unsigned char mxser_get_msr(int baseaddr, int mode, int port) -{ - unsigned char status = 0; - - status = inb(baseaddr + UART_MSR); - - mxser_msr[port] &= 0x0F; - mxser_msr[port] |= status; - status = mxser_msr[port]; - if (mode) - mxser_msr[port] = 0; - - return status; -} - -static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, - struct mxser_port *port) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - unsigned long flags; - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - test_bit(TTY_IO_ERROR, &tty->flags)) { - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * mxser_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->open_wait, &wait); - - spin_lock_irqsave(&port->slock, flags); - if (!tty_hung_up_p(filp)) - port->count--; - spin_unlock_irqrestore(&port->slock, flags); - port->blocked_open++; - while (1) { - spin_lock_irqsave(&port->slock, flags); - outb(inb(port->ioaddr + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR); - spin_unlock_irqrestore(&port->slock, flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { - if (port->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->flags & ASYNC_CLOSING) && - (do_clocal || - (inb(port->ioaddr + UART_MSR) & UART_MSR_DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->count++; - port->blocked_open--; - if (retval) - return retval; - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -static int mxser_set_baud(struct mxser_port *info, long newspd) -{ - unsigned int i; - int quot = 0; - unsigned char cval; - int ret = 0; - - if (!info->tty || !info->tty->termios) - return ret; - - if (!(info->ioaddr)) - return ret; - - if (newspd > info->max_baud) - return 0; - - info->realbaud = newspd; - for (i = 0; i < BAUD_TABLE_NO; i++) - if (newspd == mxvar_baud_table[i]) - break; - if (i == BAUD_TABLE_NO) { - quot = info->baud_base / info->speed; - if (info->speed <= 0 || info->speed > info->max_baud) - quot = 0; - } else { - if (newspd == 134) { - quot = (2 * info->baud_base / 269); - } else if (newspd) { - quot = info->baud_base / newspd; - if (quot == 0) - quot = 1; - } else { - quot = 0; - } - } - - info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); - info->timeout += HZ / 50; /* Add .02 seconds of slop */ - - if (quot) { - info->MCR |= UART_MCR_DTR; - outb(info->MCR, info->ioaddr + UART_MCR); - } else { - info->MCR &= ~UART_MCR_DTR; - outb(info->MCR, info->ioaddr + UART_MCR); - return ret; - } - - cval = inb(info->ioaddr + UART_LCR); - - outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */ - - outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */ - outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ - outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ - - if (i == BAUD_TABLE_NO) { - quot = info->baud_base % info->speed; - quot *= 8; - if ((quot % info->speed) > (info->speed / 2)) { - quot /= info->speed; - quot++; - } else { - quot /= info->speed; - } - SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, quot); - } else - SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, 0); - - return ret; -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static int mxser_change_speed(struct mxser_port *info, - struct ktermios *old_termios) -{ - unsigned cflag, cval, fcr; - int ret = 0; - unsigned char status; - long baud; - - if (!info->tty || !info->tty->termios) - return ret; - cflag = info->tty->termios->c_cflag; - if (!(info->ioaddr)) - return ret; - - if (mxser_set_baud_method[info->tty->index] == 0) { - if ((cflag & CBAUD) == B_SPEC) - baud = info->speed; - else - baud = tty_get_baud_rate(info->tty); - mxser_set_baud(info, baud); - } - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - cval = 0x00; - break; - case CS6: - cval = 0x01; - break; - case CS7: - cval = 0x02; - break; - case CS8: - cval = 0x03; - break; - default: - cval = 0x00; - break; /* too keep GCC shut... */ - } - if (cflag & CSTOPB) - cval |= 0x04; - if (cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; - - if ((info->type == PORT_8250) || (info->type == PORT_16450)) { - if (info->board->chip_flag) { - fcr = UART_FCR_ENABLE_FIFO; - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - SET_MOXA_MUST_FIFO_VALUE(info); - } else - fcr = 0; - } else { - fcr = UART_FCR_ENABLE_FIFO; - if (info->board->chip_flag) { - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - SET_MOXA_MUST_FIFO_VALUE(info); - } else { - switch (info->rx_trigger) { - case 1: - fcr |= UART_FCR_TRIGGER_1; - break; - case 4: - fcr |= UART_FCR_TRIGGER_4; - break; - case 8: - fcr |= UART_FCR_TRIGGER_8; - break; - default: - fcr |= UART_FCR_TRIGGER_14; - break; - } - } - } - - /* CTS flow control flag and modem status interrupts */ - info->IER &= ~UART_IER_MSI; - info->MCR &= ~UART_MCR_AFE; - if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; - info->IER |= UART_IER_MSI; - if ((info->type == PORT_16550A) || (info->board->chip_flag)) { - info->MCR |= UART_MCR_AFE; - } else { - status = inb(info->ioaddr + UART_MSR); - if (info->tty->hw_stopped) { - if (status & UART_MSR_CTS) { - info->tty->hw_stopped = 0; - if (info->type != PORT_16550A && - !info->board->chip_flag) { - outb(info->IER & ~UART_IER_THRI, - info->ioaddr + - UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + - UART_IER); - } - tty_wakeup(info->tty); - } - } else { - if (!(status & UART_MSR_CTS)) { - info->tty->hw_stopped = 1; - if ((info->type != PORT_16550A) && - (!info->board->chip_flag)) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->ioaddr + - UART_IER); - } - } - } - } - } else { - info->flags &= ~ASYNC_CTS_FLOW; - } - outb(info->MCR, info->ioaddr + UART_MCR); - if (cflag & CLOCAL) { - info->flags &= ~ASYNC_CHECK_CD; - } else { - info->flags |= ASYNC_CHECK_CD; - info->IER |= UART_IER_MSI; - } - outb(info->IER, info->ioaddr + UART_IER); - - /* - * Set up parity check flag - */ - info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (I_INPCK(info->tty)) - info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) - info->read_status_mask |= UART_LSR_BI; - - info->ignore_status_mask = 0; - - if (I_IGNBRK(info->tty)) { - info->ignore_status_mask |= UART_LSR_BI; - info->read_status_mask |= UART_LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->tty)) { - info->ignore_status_mask |= - UART_LSR_OE | - UART_LSR_PE | - UART_LSR_FE; - info->read_status_mask |= - UART_LSR_OE | - UART_LSR_PE | - UART_LSR_FE; - } - } - if (info->board->chip_flag) { - SET_MOXA_MUST_XON1_VALUE(info->ioaddr, START_CHAR(info->tty)); - SET_MOXA_MUST_XOFF1_VALUE(info->ioaddr, STOP_CHAR(info->tty)); - if (I_IXON(info->tty)) { - ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr); - } else { - DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr); - } - if (I_IXOFF(info->tty)) { - ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr); - } else { - DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr); - } - } - - - outb(fcr, info->ioaddr + UART_FCR); /* set fcr */ - outb(cval, info->ioaddr + UART_LCR); - - return ret; -} - -static void mxser_check_modem_status(struct mxser_port *port, int status) -{ - /* update input line counters */ - if (status & UART_MSR_TERI) - port->icount.rng++; - if (status & UART_MSR_DDSR) - port->icount.dsr++; - if (status & UART_MSR_DDCD) - port->icount.dcd++; - if (status & UART_MSR_DCTS) - port->icount.cts++; - port->mon_data.modem_status = status; - wake_up_interruptible(&port->delta_msr_wait); - - if ((port->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { - if (status & UART_MSR_DCD) - wake_up_interruptible(&port->open_wait); - } - - if (port->flags & ASYNC_CTS_FLOW) { - if (port->tty->hw_stopped) { - if (status & UART_MSR_CTS) { - port->tty->hw_stopped = 0; - - if ((port->type != PORT_16550A) && - (!port->board->chip_flag)) { - outb(port->IER & ~UART_IER_THRI, - port->ioaddr + UART_IER); - port->IER |= UART_IER_THRI; - outb(port->IER, port->ioaddr + - UART_IER); - } - tty_wakeup(port->tty); - } - } else { - if (!(status & UART_MSR_CTS)) { - port->tty->hw_stopped = 1; - if (port->type != PORT_16550A && - !port->board->chip_flag) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + - UART_IER); - } - } - } - } -} - -static int mxser_startup(struct mxser_port *info) -{ - unsigned long page; - unsigned long flags; - - page = __get_free_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - spin_lock_irqsave(&info->slock, flags); - - if (info->flags & ASYNC_INITIALIZED) { - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } - - if (!info->ioaddr || !info->type) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } - if (info->xmit_buf) - free_page(page); - else - info->xmit_buf = (unsigned char *) page; - - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in mxser_change_speed()) - */ - if (info->board->chip_flag) - outb((UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR); - else - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->ioaddr + UART_FCR); - - /* - * At this point there's no way the LSR could still be 0xFF; - * if it is, then bail out, because there's likely no UART - * here. - */ - if (inb(info->ioaddr + UART_LSR) == 0xff) { - spin_unlock_irqrestore(&info->slock, flags); - if (capable(CAP_SYS_ADMIN)) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - return 0; - } else - return -ENODEV; - } - - /* - * Clear the interrupt registers. - */ - (void) inb(info->ioaddr + UART_LSR); - (void) inb(info->ioaddr + UART_RX); - (void) inb(info->ioaddr + UART_IIR); - (void) inb(info->ioaddr + UART_MSR); - - /* - * Now, initialize the UART - */ - outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */ - info->MCR = UART_MCR_DTR | UART_MCR_RTS; - outb(info->MCR, info->ioaddr + UART_MCR); - - /* - * Finally, enable interrupts - */ - info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; - - if (info->board->chip_flag) - info->IER |= MOXA_MUST_IER_EGDAI; - outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */ - - /* - * And clear the interrupt registers again for luck. - */ - (void) inb(info->ioaddr + UART_LSR); - (void) inb(info->ioaddr + UART_RX); - (void) inb(info->ioaddr + UART_IIR); - (void) inb(info->ioaddr + UART_MSR); - - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - /* - * and set the speed of the serial port - */ - mxser_change_speed(info, NULL); - info->flags |= ASYNC_INITIALIZED; - spin_unlock_irqrestore(&info->slock, flags); - - return 0; -} - -/* - * This routine will shutdown a serial port; interrupts maybe disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void mxser_shutdown(struct mxser_port *info) -{ - unsigned long flags; - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - - spin_lock_irqsave(&info->slock, flags); - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free the irq - * here so the queue might never be waken up - */ - wake_up_interruptible(&info->delta_msr_wait); - - /* - * Free the IRQ, if necessary - */ - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; - } - - info->IER = 0; - outb(0x00, info->ioaddr + UART_IER); - - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) - info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); - outb(info->MCR, info->ioaddr + UART_MCR); - - /* clear Rx/Tx FIFO's */ - if (info->board->chip_flag) - outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE, - info->ioaddr + UART_FCR); - else - outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, - info->ioaddr + UART_FCR); - - /* read data port to reset things */ - (void) inb(info->ioaddr + UART_RX); - - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - - if (info->board->chip_flag) - SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); - - spin_unlock_irqrestore(&info->slock, flags); -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int mxser_open(struct tty_struct *tty, struct file *filp) -{ - struct mxser_port *info; - unsigned long flags; - int retval, line; - - line = tty->index; - if (line == MXSER_PORTS) - return 0; - if (line < 0 || line > MXSER_PORTS) - return -ENODEV; - info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD]; - if (!info->ioaddr) - return -ENODEV; - - tty->driver_data = info; - info->tty = tty; - /* - * Start up serial port - */ - spin_lock_irqsave(&info->slock, flags); - info->count++; - spin_unlock_irqrestore(&info->slock, flags); - retval = mxser_startup(info); - if (retval) - return retval; - - retval = mxser_block_til_ready(tty, filp, info); - if (retval) - return retval; - - /* unmark here for very high baud rate (ex. 921600 bps) used */ - tty->low_latency = 1; - return 0; -} - -/* - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - */ -static void mxser_close(struct tty_struct *tty, struct file *filp) -{ - struct mxser_port *info = tty->driver_data; - - unsigned long timeout; - unsigned long flags; - - if (tty->index == MXSER_PORTS) - return; - if (!info) - return; - - spin_lock_irqsave(&info->slock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "mxser_close: bad serial port count; " - "tty->count is 1, info->count is %d\n", info->count); - info->count = 1; - } - if (--info->count < 0) { - printk(KERN_ERR "mxser_close: bad serial port count for " - "ttys%d: %d\n", tty->index, info->count); - info->count = 0; - } - if (info->count) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - info->flags |= ASYNC_CLOSING; - spin_unlock_irqrestore(&info->slock, flags); - /* - * Save the termios structure, since this port may have - * separate termios for callout and dialin. - */ - if (info->flags & ASYNC_NORMAL_ACTIVE) - info->normal_termios = *tty->termios; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - info->IER &= ~UART_IER_RLSI; - if (info->board->chip_flag) - info->IER &= ~MOXA_MUST_RECV_ISR; - - if (info->flags & ASYNC_INITIALIZED) { - outb(info->IER, info->ioaddr + UART_IER); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { - schedule_timeout_interruptible(5); - if (time_after(jiffies, timeout)) - break; - } - } - mxser_shutdown(info); - - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - - tty_ldisc_flush(tty); - - tty->closing = 0; - info->event = 0; - info->tty = NULL; - if (info->blocked_open) { - if (info->close_delay) - schedule_timeout_interruptible(info->close_delay); - wake_up_interruptible(&info->open_wait); - } - - info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); -} - -static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - int c, total = 0; - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (!info->xmit_buf) - return 0; - - while (1) { - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) - break; - - memcpy(info->xmit_buf + info->xmit_head, buf, c); - spin_lock_irqsave(&info->slock, flags); - info->xmit_head = (info->xmit_head + c) & - (SERIAL_XMIT_SIZE - 1); - info->xmit_cnt += c; - spin_unlock_irqrestore(&info->slock, flags); - - buf += c; - count -= c; - total += c; - } - - if (info->xmit_cnt && !tty->stopped) { - if (!tty->hw_stopped || - (info->type == PORT_16550A) || - (info->board->chip_flag)) { - spin_lock_irqsave(&info->slock, flags); - outb(info->IER & ~UART_IER_THRI, info->ioaddr + - UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } - return total; -} - -static void mxser_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (!info->xmit_buf) - return; - - if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) - return; - - spin_lock_irqsave(&info->slock, flags); - info->xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= SERIAL_XMIT_SIZE - 1; - info->xmit_cnt++; - spin_unlock_irqrestore(&info->slock, flags); - if (!tty->stopped) { - if (!tty->hw_stopped || - (info->type == PORT_16550A) || - info->board->chip_flag) { - spin_lock_irqsave(&info->slock, flags); - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } -} - - -static void mxser_flush_chars(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (info->xmit_cnt <= 0 || - tty->stopped || - !info->xmit_buf || - (tty->hw_stopped && - (info->type != PORT_16550A) && - (!info->board->chip_flag) - )) - return; - - spin_lock_irqsave(&info->slock, flags); - - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - - spin_unlock_irqrestore(&info->slock, flags); -} - -static int mxser_write_room(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - int ret; - - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} - -static int mxser_chars_in_buffer(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - return info->xmit_cnt; -} - -static void mxser_flush_buffer(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - char fcr; - unsigned long flags; - - - spin_lock_irqsave(&info->slock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - fcr = inb(info->ioaddr + UART_FCR); - outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->ioaddr + UART_FCR); - outb(fcr, info->ioaddr + UART_FCR); - - spin_unlock_irqrestore(&info->slock, flags); - - tty_wakeup(tty); -} - -/* - * ------------------------------------------------------------ - * friends of mxser_ioctl() - * ------------------------------------------------------------ - */ -static int mxser_get_serial_info(struct mxser_port *info, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->tty->index; - tmp.port = info->ioaddr; - tmp.irq = info->board->irq; - tmp.flags = info->flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - tmp.hub6 = 0; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int mxser_set_serial_info(struct mxser_port *info, - struct serial_struct __user *new_info) -{ - struct serial_struct new_serial; - unsigned long sl_flags; - unsigned int flags; - int retval = 0; - - if (!new_info || !info->ioaddr) - return -EFAULT; - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - - if ((new_serial.irq != info->board->irq) || - (new_serial.port != info->ioaddr) || - (new_serial.custom_divisor != info->custom_divisor) || - (new_serial.baud_base != info->baud_base)) - return -EPERM; - - flags = info->flags & ASYNC_SPD_MASK; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != info->baud_base) || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - } else { - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - info->flags = ((info->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->close_delay = new_serial.close_delay * HZ / 100; - info->closing_wait = new_serial.closing_wait * HZ / 100; - info->tty->low_latency = - (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - info->tty->low_latency = 0; - } - - info->type = new_serial.type; - - process_txrx_fifo(info); - - if (info->flags & ASYNC_INITIALIZED) { - if (flags != (info->flags & ASYNC_SPD_MASK)) { - spin_lock_irqsave(&info->slock, sl_flags); - mxser_change_speed(info, NULL); - spin_unlock_irqrestore(&info->slock, sl_flags); - } - } else - retval = mxser_startup(info); - - return retval; -} - -/* - * mxser_get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int mxser_get_lsr_info(struct mxser_port *info, - unsigned int __user *value) -{ - unsigned char status; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - status = inb(info->ioaddr + UART_LSR); - spin_unlock_irqrestore(&info->slock, flags); - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result, value); -} - -/* - * This routine sends a break character out the serial port. - */ -static void mxser_send_break(struct mxser_port *info, int duration) -{ - unsigned long flags; - - if (!info->ioaddr) - return; - set_current_state(TASK_INTERRUPTIBLE); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, - info->ioaddr + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); - schedule_timeout(duration); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, - info->ioaddr + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); -} - -static int mxser_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct mxser_port *info = tty->driver_data; - unsigned char control, status; - unsigned long flags; - - - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; - if (test_bit(TTY_IO_ERROR, &tty->flags)) - return -EIO; - - control = info->MCR; - - spin_lock_irqsave(&info->slock, flags); - status = inb(info->ioaddr + UART_MSR); - if (status & UART_MSR_ANY_DELTA) - mxser_check_modem_status(info, status); - spin_unlock_irqrestore(&info->slock, flags); - return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | - ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | - ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | - ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | - ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | - ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -} - -static int mxser_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; - if (test_bit(TTY_IO_ERROR, &tty->flags)) - return -EIO; - - spin_lock_irqsave(&info->slock, flags); - - if (set & TIOCM_RTS) - info->MCR |= UART_MCR_RTS; - if (set & TIOCM_DTR) - info->MCR |= UART_MCR_DTR; - - if (clear & TIOCM_RTS) - info->MCR &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~UART_MCR_DTR; - - outb(info->MCR, info->ioaddr + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - return 0; -} - -static int __init mxser_program_mode(int port) -{ - int id, i, j, n; - - outb(0, port); - outb(0, port); - outb(0, port); - (void)inb(port); - (void)inb(port); - outb(0, port); - (void)inb(port); - - id = inb(port + 1) & 0x1F; - if ((id != C168_ASIC_ID) && - (id != C104_ASIC_ID) && - (id != C102_ASIC_ID) && - (id != CI132_ASIC_ID) && - (id != CI134_ASIC_ID) && - (id != CI104J_ASIC_ID)) - return -1; - for (i = 0, j = 0; i < 4; i++) { - n = inb(port + 2); - if (n == 'M') { - j = 1; - } else if ((j == 1) && (n == 1)) { - j = 2; - break; - } else - j = 0; - } - if (j != 2) - id = -2; - return id; -} - -static void __init mxser_normal_mode(int port) -{ - int i, n; - - outb(0xA5, port + 1); - outb(0x80, port + 3); - outb(12, port + 0); /* 9600 bps */ - outb(0, port + 1); - outb(0x03, port + 3); /* 8 data bits */ - outb(0x13, port + 4); /* loop back mode */ - for (i = 0; i < 16; i++) { - n = inb(port + 5); - if ((n & 0x61) == 0x60) - break; - if ((n & 1) == 1) - (void)inb(port); - } - outb(0x00, port + 4); -} - -#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ -#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ -#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ -#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ -#define EN_CCMD 0x000 /* Chip's command register */ -#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ -#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ -#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ -#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ -#define EN0_DCFG 0x00E /* Data configuration reg WR */ -#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ -#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ -#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ -static int __init mxser_read_register(int port, unsigned short *regs) -{ - int i, k, value, id; - unsigned int j; - - id = mxser_program_mode(port); - if (id < 0) - return id; - for (i = 0; i < 14; i++) { - k = (i & 0x3F) | 0x180; - for (j = 0x100; j > 0; j >>= 1) { - outb(CHIP_CS, port); - if (k & j) { - outb(CHIP_CS | CHIP_DO, port); - outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ - } else { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ - } - } - (void)inb(port); - value = 0; - for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); - if (inb(port) & CHIP_DI) - value |= j; - } - regs[i] = value; - outb(0, port); - } - mxser_normal_mode(port); - return id; -} - -static int mxser_ioctl_special(unsigned int cmd, void __user *argp) -{ - struct mxser_port *port; - int result, status; - unsigned int i, j; - - switch (cmd) { - case MOXA_GET_CONF: -/* if (copy_to_user(argp, mxsercfg, - sizeof(struct mxser_hwconf) * 4)) - return -EFAULT; - return 0;*/ - return -ENXIO; - case MOXA_GET_MAJOR: - if (copy_to_user(argp, &ttymajor, sizeof(int))) - return -EFAULT; - return 0; - - case MOXA_GET_CUMAJOR: - if (copy_to_user(argp, &calloutmajor, sizeof(int))) - return -EFAULT; - return 0; - - case MOXA_CHKPORTENABLE: - result = 0; - - for (i = 0; i < MXSER_BOARDS; i++) - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) - if (mxser_boards[i].ports[j].ioaddr) - result |= (1 << i); - - return put_user(result, (unsigned long __user *)argp); - case MOXA_GETDATACOUNT: - if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) - return -EFAULT; - return 0; - case MOXA_GETMSTATUS: - for (i = 0; i < MXSER_BOARDS; i++) - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { - port = &mxser_boards[i].ports[j]; - - GMStatus[i].ri = 0; - if (!port->ioaddr) { - GMStatus[i].dcd = 0; - GMStatus[i].dsr = 0; - GMStatus[i].cts = 0; - continue; - } - - if (!port->tty || !port->tty->termios) - GMStatus[i].cflag = - port->normal_termios.c_cflag; - else - GMStatus[i].cflag = - port->tty->termios->c_cflag; - - status = inb(port->ioaddr + UART_MSR); - if (status & 0x80 /*UART_MSR_DCD */ ) - GMStatus[i].dcd = 1; - else - GMStatus[i].dcd = 0; - - if (status & 0x20 /*UART_MSR_DSR */ ) - GMStatus[i].dsr = 1; - else - GMStatus[i].dsr = 0; - - - if (status & 0x10 /*UART_MSR_CTS */ ) - GMStatus[i].cts = 1; - else - GMStatus[i].cts = 0; - } - if (copy_to_user(argp, GMStatus, - sizeof(struct mxser_mstatus) * MXSER_PORTS)) - return -EFAULT; - return 0; - case MOXA_ASPP_MON_EXT: { - int p, shiftbit; - unsigned long opmode; - unsigned cflag, iflag; - - for (i = 0; i < MXSER_BOARDS; i++) - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { - port = &mxser_boards[i].ports[j]; - if (!port->ioaddr) - continue; - - status = mxser_get_msr(port->ioaddr, 0, i); - - if (status & UART_MSR_TERI) - port->icount.rng++; - if (status & UART_MSR_DDSR) - port->icount.dsr++; - if (status & UART_MSR_DDCD) - port->icount.dcd++; - if (status & UART_MSR_DCTS) - port->icount.cts++; - - port->mon_data.modem_status = status; - mon_data_ext.rx_cnt[i] = port->mon_data.rxcnt; - mon_data_ext.tx_cnt[i] = port->mon_data.txcnt; - mon_data_ext.up_rxcnt[i] = - port->mon_data.up_rxcnt; - mon_data_ext.up_txcnt[i] = - port->mon_data.up_txcnt; - mon_data_ext.modem_status[i] = - port->mon_data.modem_status; - mon_data_ext.baudrate[i] = port->realbaud; - - if (!port->tty || !port->tty->termios) { - cflag = port->normal_termios.c_cflag; - iflag = port->normal_termios.c_iflag; - } else { - cflag = port->tty->termios->c_cflag; - iflag = port->tty->termios->c_iflag; - } - - mon_data_ext.databits[i] = cflag & CSIZE; - - mon_data_ext.stopbits[i] = cflag & CSTOPB; - - mon_data_ext.parity[i] = - cflag & (PARENB | PARODD | CMSPAR); - - mon_data_ext.flowctrl[i] = 0x00; - - if (cflag & CRTSCTS) - mon_data_ext.flowctrl[i] |= 0x03; - - if (iflag & (IXON | IXOFF)) - mon_data_ext.flowctrl[i] |= 0x0C; - - if (port->type == PORT_16550A) - mon_data_ext.fifo[i] = 1; - else - mon_data_ext.fifo[i] = 0; - - p = i % 4; - shiftbit = p * 2; - opmode = inb(port->opmode_ioaddr) >> shiftbit; - opmode &= OP_MODE_MASK; - - mon_data_ext.iftype[i] = opmode; - - } - if (copy_to_user(argp, &mon_data_ext, - sizeof(mon_data_ext))) - return -EFAULT; - - return 0; - - } default: - return -ENOIOCTLCMD; - } - return 0; -} - -static int mxser_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct mxser_port *info = tty->driver_data; - struct async_icount cprev, cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; - unsigned long templ; - unsigned long flags; - unsigned int i; - void __user *argp = (void __user *)arg; - int retval; - - if (tty->index == MXSER_PORTS) - return mxser_ioctl_special(cmd, argp); - - if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { - int p; - unsigned long opmode; - static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; - int shiftbit; - unsigned char val, mask; - - p = tty->index % 4; - if (cmd == MOXA_SET_OP_MODE) { - if (get_user(opmode, (int __user *) argp)) - return -EFAULT; - if (opmode != RS232_MODE && - opmode != RS485_2WIRE_MODE && - opmode != RS422_MODE && - opmode != RS485_4WIRE_MODE) - return -EFAULT; - mask = ModeMask[p]; - shiftbit = p * 2; - val = inb(info->opmode_ioaddr); - val &= mask; - val |= (opmode << shiftbit); - outb(val, info->opmode_ioaddr); - } else { - shiftbit = p * 2; - opmode = inb(info->opmode_ioaddr) >> shiftbit; - opmode &= OP_MODE_MASK; - if (copy_to_user(argp, &opmode, sizeof(int))) - return -EFAULT; - } - return 0; - } - - if (cmd == MOXA_SET_SPECIAL_BAUD_RATE) { - int speed; - - if (get_user(speed, (int __user *)argp)) - return -EFAULT; - if (speed <= 0 || speed > info->max_baud) - return -EFAULT; - if (!info->tty || !info->tty->termios || !info->ioaddr) - return 0; - info->tty->termios->c_cflag &= ~(CBAUD | CBAUDEX); - for (i = 0; i < BAUD_TABLE_NO; i++) - if (speed == mxvar_baud_table[i]) - break; - if (i == BAUD_TABLE_NO) { - info->tty->termios->c_cflag |= B_SPEC; - } else if (speed != 0) - info->tty->termios->c_cflag |= mxvar_baud_table1[i]; - - info->speed = speed; - spin_lock_irqsave(&info->slock, flags); - mxser_change_speed(info, NULL); - spin_unlock_irqrestore(&info->slock, flags); - - return 0; - } else if (cmd == MOXA_GET_SPECIAL_BAUD_RATE) { - if (copy_to_user(argp, &info->speed, sizeof(int))) - return -EFAULT; - return 0; - } - - if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT && - test_bit(TTY_IO_ERROR, &tty->flags)) - return -EIO; - - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (!arg) - mxser_send_break(info, HZ / 4); /* 1/4 second */ - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4); - return 0; - case TIOCGSOFTCAR: - return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp); - case TIOCSSOFTCAR: - if (get_user(templ, (unsigned long __user *) argp)) - return -EFAULT; - arg = templ; - tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); - return 0; - case TIOCGSERIAL: - return mxser_get_serial_info(info, argp); - case TIOCSSERIAL: - return mxser_set_serial_info(info, argp); - case TIOCSERGETLSR: /* Get line status register */ - return mxser_get_lsr_info(info, argp); - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; /* note the counters on entry */ - spin_unlock_irqrestore(&info->slock, flags); - - wait_event_interruptible(info->delta_msr_wait, ({ - cprev = cnow; - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; /* atomic copy */ - spin_unlock_irqrestore(&info->slock, flags); - - ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)); - })); - break; - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->slock, flags); - p_cuser = argp; - if (put_user(cnow.frame, &p_cuser->frame)) - return -EFAULT; - if (put_user(cnow.brk, &p_cuser->brk)) - return -EFAULT; - if (put_user(cnow.overrun, &p_cuser->overrun)) - return -EFAULT; - if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) - return -EFAULT; - if (put_user(cnow.parity, &p_cuser->parity)) - return -EFAULT; - if (put_user(cnow.rx, &p_cuser->rx)) - return -EFAULT; - if (put_user(cnow.tx, &p_cuser->tx)) - return -EFAULT; - put_user(cnow.cts, &p_cuser->cts); - put_user(cnow.dsr, &p_cuser->dsr); - put_user(cnow.rng, &p_cuser->rng); - put_user(cnow.dcd, &p_cuser->dcd); - return 0; - case MOXA_HighSpeedOn: - return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); - case MOXA_SDS_RSTICOUNTER: - info->mon_data.rxcnt = 0; - info->mon_data.txcnt = 0; - return 0; - case MOXA_ASPP_SETBAUD:{ - long baud; - if (get_user(baud, (long __user *)argp)) - return -EFAULT; - spin_lock_irqsave(&info->slock, flags); - mxser_set_baud(info, baud); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } - case MOXA_ASPP_GETBAUD: - if (copy_to_user(argp, &info->realbaud, sizeof(long))) - return -EFAULT; - - return 0; - - case MOXA_ASPP_OQUEUE:{ - int len, lsr; - - len = mxser_chars_in_buffer(tty); - - lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT; - - len += (lsr ? 0 : 1); - - if (copy_to_user(argp, &len, sizeof(int))) - return -EFAULT; - - return 0; - } - case MOXA_ASPP_MON: { - int mcr, status; - - status = mxser_get_msr(info->ioaddr, 1, tty->index); - mxser_check_modem_status(info, status); - - mcr = inb(info->ioaddr + UART_MCR); - if (mcr & MOXA_MUST_MCR_XON_FLAG) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; - - if (mcr & MOXA_MUST_MCR_TX_XON) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; - - if (info->tty->hw_stopped) - info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; - else - info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; - - if (copy_to_user(argp, &info->mon_data, - sizeof(struct mxser_mon))) - return -EFAULT; - - return 0; - } - case MOXA_ASPP_LSTATUS: { - if (copy_to_user(argp, &info->err_shadow, - sizeof(unsigned char))) - return -EFAULT; - - info->err_shadow = 0; - return 0; - } - case MOXA_SET_BAUD_METHOD: { - int method; - - if (get_user(method, (int __user *)argp)) - return -EFAULT; - mxser_set_baud_method[tty->index] = method; - if (copy_to_user(argp, &method, sizeof(int))) - return -EFAULT; - - return 0; - } - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void mxser_stoprx(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - - info->ldisc_stop_rx = 1; - if (I_IXOFF(tty)) { - if (info->board->chip_flag) { - info->IER &= ~MOXA_MUST_RECV_ISR; - outb(info->IER, info->ioaddr + UART_IER); - } else { - info->x_char = STOP_CHAR(tty); - outb(0, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - } - - if (info->tty->termios->c_cflag & CRTSCTS) { - info->MCR &= ~UART_MCR_RTS; - outb(info->MCR, info->ioaddr + UART_MCR); - } -} - -/* - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - */ -static void mxser_throttle(struct tty_struct *tty) -{ - mxser_stoprx(tty); -} - -static void mxser_unthrottle(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - - /* startrx */ - info->ldisc_stop_rx = 0; - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else { - if (info->board->chip_flag) { - info->IER |= MOXA_MUST_RECV_ISR; - outb(info->IER, info->ioaddr + UART_IER); - } else { - info->x_char = START_CHAR(tty); - outb(0, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - } - } - - if (info->tty->termios->c_cflag & CRTSCTS) { - info->MCR |= UART_MCR_RTS; - outb(info->MCR, info->ioaddr + UART_MCR); - } -} - -/* - * mxser_stop() and mxser_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - */ -static void mxser_stop(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->IER & UART_IER_THRI) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_start(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->xmit_cnt && info->xmit_buf) { - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - mxser_change_speed(info, old_termios); - spin_unlock_irqrestore(&info->slock, flags); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - mxser_start(tty); - } - - /* Handle sw stopped */ - if ((old_termios->c_iflag & IXON) && - !(tty->termios->c_iflag & IXON)) { - tty->stopped = 0; - - if (info->board->chip_flag) { - spin_lock_irqsave(&info->slock, flags); - DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr); - spin_unlock_irqrestore(&info->slock, flags); - } - - mxser_start(tty); - } -} - -/* - * mxser_wait_until_sent() --- wait until the transmitter is empty - */ -static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct mxser_port *info = tty->driver_data; - unsigned long orig_jiffies, char_time; - int lsr; - - if (info->type == PORT_UNKNOWN) - return; - - if (info->xmit_fifo_size == 0) - return; /* Just in case.... */ - - orig_jiffies = jiffies; - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; - char_time = char_time / 5; - if (char_time == 0) - char_time = 1; - if (timeout && timeout < char_time) - char_time = timeout; - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than info->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*info->timeout. - */ - if (!timeout || timeout > 2 * info->timeout) - timeout = 2 * info->timeout; -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...", - timeout, char_time); - printk("jiff=%lu...", jiffies); -#endif - while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) { -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...", lsr, jiffies); -#endif - schedule_timeout_interruptible(char_time); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - set_current_state(TASK_RUNNING); - -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); -#endif -} - -/* - * This routine is called by tty_hangup() when a hangup is signaled. - */ -static void mxser_hangup(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - - mxser_flush_buffer(tty); - mxser_shutdown(info); - info->event = 0; - info->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * mxser_rs_break() --- routine which turns the break handling on or off - */ -static void mxser_rs_break(struct tty_struct *tty, int break_state) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (break_state == -1) - outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, - info->ioaddr + UART_LCR); - else - outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, - info->ioaddr + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_receive_chars(struct mxser_port *port, int *status) -{ - struct tty_struct *tty = port->tty; - unsigned char ch, gdl; - int ignored = 0; - int cnt = 0; - int recv_room; - int max = 256; - - recv_room = tty->receive_room; - if ((recv_room == 0) && (!port->ldisc_stop_rx)) - mxser_stoprx(tty); - - if (port->board->chip_flag != MOXA_OTHER_UART) { - - if (*status & UART_LSR_SPECIAL) - goto intr_old; - if (port->board->chip_flag == MOXA_MUST_MU860_HWID && - (*status & MOXA_MUST_LSR_RERR)) - goto intr_old; - if (*status & MOXA_MUST_LSR_RERR) - goto intr_old; - - gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); - - if (port->board->chip_flag == MOXA_MUST_MU150_HWID) - gdl &= MOXA_MUST_GDL_MASK; - if (gdl >= recv_room) { - if (!port->ldisc_stop_rx) - mxser_stoprx(tty); - } - while (gdl--) { - ch = inb(port->ioaddr + UART_RX); - tty_insert_flip_char(tty, ch, 0); - cnt++; - } - goto end_intr; - } -intr_old: - - do { - if (max-- < 0) - break; - - ch = inb(port->ioaddr + UART_RX); - if (port->board->chip_flag && (*status & UART_LSR_OE)) - outb(0x23, port->ioaddr + UART_FCR); - *status &= port->read_status_mask; - if (*status & port->ignore_status_mask) { - if (++ignored > 100) - break; - } else { - char flag = 0; - if (*status & UART_LSR_SPECIAL) { - if (*status & UART_LSR_BI) { - flag = TTY_BREAK; - port->icount.brk++; - - if (port->flags & ASYNC_SAK) - do_SAK(tty); - } else if (*status & UART_LSR_PE) { - flag = TTY_PARITY; - port->icount.parity++; - } else if (*status & UART_LSR_FE) { - flag = TTY_FRAME; - port->icount.frame++; - } else if (*status & UART_LSR_OE) { - flag = TTY_OVERRUN; - port->icount.overrun++; - } else - flag = TTY_BREAK; - } - tty_insert_flip_char(tty, ch, flag); - cnt++; - if (cnt >= recv_room) { - if (!port->ldisc_stop_rx) - mxser_stoprx(tty); - break; - } - - } - - if (port->board->chip_flag) - break; - - *status = inb(port->ioaddr + UART_LSR); - } while (*status & UART_LSR_DR); - -end_intr: - mxvar_log.rxcnt[port->tty->index] += cnt; - port->mon_data.rxcnt += cnt; - port->mon_data.up_rxcnt += cnt; - - /* - * We are called from an interrupt context with &port->slock - * being held. Drop it temporarily in order to prevent - * recursive locking. - */ - spin_unlock(&port->slock); - tty_flip_buffer_push(tty); - spin_lock(&port->slock); -} - -static void mxser_transmit_chars(struct mxser_port *port) -{ - int count, cnt; - - if (port->x_char) { - outb(port->x_char, port->ioaddr + UART_TX); - port->x_char = 0; - mxvar_log.txcnt[port->tty->index]++; - port->mon_data.txcnt++; - port->mon_data.up_txcnt++; - port->icount.tx++; - return; - } - - if (port->xmit_buf == 0) - return; - - if ((port->xmit_cnt <= 0) || port->tty->stopped || - (port->tty->hw_stopped && - (port->type != PORT_16550A) && - (!port->board->chip_flag))) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + UART_IER); - return; - } - - cnt = port->xmit_cnt; - count = port->xmit_fifo_size; - do { - outb(port->xmit_buf[port->xmit_tail++], - port->ioaddr + UART_TX); - port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1); - if (--port->xmit_cnt <= 0) - break; - } while (--count > 0); - mxvar_log.txcnt[port->tty->index] += (cnt - port->xmit_cnt); - - port->mon_data.txcnt += (cnt - port->xmit_cnt); - port->mon_data.up_txcnt += (cnt - port->xmit_cnt); - port->icount.tx += (cnt - port->xmit_cnt); - - if (port->xmit_cnt < WAKEUP_CHARS) - tty_wakeup(port->tty); - - if (port->xmit_cnt <= 0) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + UART_IER); - } -} - -/* - * This is the serial driver's generic interrupt routine - */ -static irqreturn_t mxser_interrupt(int irq, void *dev_id) -{ - int status, iir, i; - struct mxser_board *brd = NULL; - struct mxser_port *port; - int max, irqbits, bits, msr; - unsigned int int_cnt, pass_counter = 0; - int handled = IRQ_NONE; - - for (i = 0; i < MXSER_BOARDS; i++) - if (dev_id == &mxser_boards[i]) { - brd = dev_id; - break; - } - - if (i == MXSER_BOARDS) - goto irq_stop; - if (brd == NULL) - goto irq_stop; - max = brd->info->nports; - while (pass_counter++ < MXSER_ISR_PASS_LIMIT) { - irqbits = inb(brd->vector) & brd->vector_mask; - if (irqbits == brd->vector_mask) - break; - - handled = IRQ_HANDLED; - for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { - if (irqbits == brd->vector_mask) - break; - if (bits & irqbits) - continue; - port = &brd->ports[i]; - - int_cnt = 0; - spin_lock(&port->slock); - do { - iir = inb(port->ioaddr + UART_IIR); - if (iir & UART_IIR_NO_INT) - break; - iir &= MOXA_MUST_IIR_MASK; - if (!port->tty || - (port->flags & ASYNC_CLOSING) || - !(port->flags & - ASYNC_INITIALIZED)) { - status = inb(port->ioaddr + UART_LSR); - outb(0x27, port->ioaddr + UART_FCR); - inb(port->ioaddr + UART_MSR); - break; - } - - status = inb(port->ioaddr + UART_LSR); - - if (status & UART_LSR_PE) - port->err_shadow |= NPPI_NOTIFY_PARITY; - if (status & UART_LSR_FE) - port->err_shadow |= NPPI_NOTIFY_FRAMING; - if (status & UART_LSR_OE) - port->err_shadow |= - NPPI_NOTIFY_HW_OVERRUN; - if (status & UART_LSR_BI) - port->err_shadow |= NPPI_NOTIFY_BREAK; - - if (port->board->chip_flag) { - if (iir == MOXA_MUST_IIR_GDA || - iir == MOXA_MUST_IIR_RDA || - iir == MOXA_MUST_IIR_RTO || - iir == MOXA_MUST_IIR_LSR) - mxser_receive_chars(port, - &status); - - } else { - status &= port->read_status_mask; - if (status & UART_LSR_DR) - mxser_receive_chars(port, - &status); - } - msr = inb(port->ioaddr + UART_MSR); - if (msr & UART_MSR_ANY_DELTA) - mxser_check_modem_status(port, msr); - - if (port->board->chip_flag) { - if (iir == 0x02 && (status & - UART_LSR_THRE)) - mxser_transmit_chars(port); - } else { - if (status & UART_LSR_THRE) - mxser_transmit_chars(port); - } - } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); - spin_unlock(&port->slock); - } - } - -irq_stop: - return handled; -} - -static const struct tty_operations mxser_ops = { - .open = mxser_open, - .close = mxser_close, - .write = mxser_write, - .put_char = mxser_put_char, - .flush_chars = mxser_flush_chars, - .write_room = mxser_write_room, - .chars_in_buffer = mxser_chars_in_buffer, - .flush_buffer = mxser_flush_buffer, - .ioctl = mxser_ioctl, - .throttle = mxser_throttle, - .unthrottle = mxser_unthrottle, - .set_termios = mxser_set_termios, - .stop = mxser_stop, - .start = mxser_start, - .hangup = mxser_hangup, - .break_ctl = mxser_rs_break, - .wait_until_sent = mxser_wait_until_sent, - .tiocmget = mxser_tiocmget, - .tiocmset = mxser_tiocmset, -}; - -/* - * The MOXA Smartio/Industio serial driver boot-time initialization code! - */ - -static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev, - unsigned int irq) -{ - if (irq) - free_irq(brd->irq, brd); - if (pdev != NULL) { /* PCI */ -#ifdef CONFIG_PCI - pci_release_region(pdev, 2); - pci_release_region(pdev, 3); -#endif - } else { - release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); - release_region(brd->vector, 1); - } -} - -static int __devinit mxser_initbrd(struct mxser_board *brd, - struct pci_dev *pdev) -{ - struct mxser_port *info; - unsigned int i; - int retval; - - printk(KERN_INFO "max. baud rate = %d bps.\n", brd->ports[0].max_baud); - - for (i = 0; i < brd->info->nports; i++) { - info = &brd->ports[i]; - info->board = brd; - info->stop_rx = 0; - info->ldisc_stop_rx = 0; - - /* Enhance mode enabled here */ - if (brd->chip_flag != MOXA_OTHER_UART) - ENABLE_MOXA_MUST_ENCHANCE_MODE(info->ioaddr); - - info->flags = ASYNC_SHARE_IRQ; - info->type = brd->uart_type; - - process_txrx_fifo(info); - - info->custom_divisor = info->baud_base * 16; - info->close_delay = 5 * HZ / 10; - info->closing_wait = 30 * HZ; - info->normal_termios = mxvar_sdriver->init_termios; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->delta_msr_wait); - info->speed = 9600; - memset(&info->mon_data, 0, sizeof(struct mxser_mon)); - info->err_shadow = 0; - spin_lock_init(&info->slock); - - /* before set INT ISR, disable all int */ - outb(inb(info->ioaddr + UART_IER) & 0xf0, - info->ioaddr + UART_IER); - } - - retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", - brd); - if (retval) { - printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may " - "conflict with another device.\n", - brd->info->name, brd->irq); - /* We hold resources, we need to release them. */ - mxser_release_res(brd, pdev, 0); - } - return retval; -} - -static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) -{ - int id, i, bits; - unsigned short regs[16], irq; - unsigned char scratch, scratch2; - - brd->chip_flag = MOXA_OTHER_UART; - - id = mxser_read_register(cap, regs); - switch (id) { - case C168_ASIC_ID: - brd->info = &mxser_cards[0]; - break; - case C104_ASIC_ID: - brd->info = &mxser_cards[1]; - break; - case CI104J_ASIC_ID: - brd->info = &mxser_cards[2]; - break; - case C102_ASIC_ID: - brd->info = &mxser_cards[5]; - break; - case CI132_ASIC_ID: - brd->info = &mxser_cards[6]; - break; - case CI134_ASIC_ID: - brd->info = &mxser_cards[7]; - break; - default: - return 0; - } - - irq = 0; - /* some ISA cards have 2 ports, but we want to see them as 4-port (why?) - Flag-hack checks if configuration should be read as 2-port here. */ - if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - if (irq != (regs[9] & 0xFF00)) - return MXSER_ERR_IRQ_CONFLIT; - } else if (brd->info->nports == 4) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if (irq != regs[9]) - return MXSER_ERR_IRQ_CONFLIT; - } else if (brd->info->nports == 8) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if ((irq != regs[9]) || (irq != regs[10])) - return MXSER_ERR_IRQ_CONFLIT; - } - - if (!irq) - return MXSER_ERR_IRQ; - brd->irq = ((int)(irq & 0xF000) >> 12); - for (i = 0; i < 8; i++) - brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8; - if ((regs[12] & 0x80) == 0) - return MXSER_ERR_VECTOR; - brd->vector = (int)regs[11]; /* interrupt vector */ - if (id == 1) - brd->vector_mask = 0x00FF; - else - brd->vector_mask = 0x000F; - for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { - if (regs[12] & bits) { - brd->ports[i].baud_base = 921600; - brd->ports[i].max_baud = 921600; - } else { - brd->ports[i].baud_base = 115200; - brd->ports[i].max_baud = 115200; - } - } - scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); - outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); - outb(0, cap + UART_EFR); /* EFR is the same as FCR */ - outb(scratch2, cap + UART_LCR); - outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); - scratch = inb(cap + UART_IIR); - - if (scratch & 0xC0) - brd->uart_type = PORT_16550A; - else - brd->uart_type = PORT_16450; - if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports, - "mxser(IO)")) - return MXSER_ERR_IOADDR; - if (!request_region(brd->vector, 1, "mxser(vector)")) { - release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); - return MXSER_ERR_VECTOR; - } - return brd->info->nports; -} - -static int __devinit mxser_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ -#ifdef CONFIG_PCI - struct mxser_board *brd; - unsigned int i, j; - unsigned long ioaddress; - int retval = -EINVAL; - - for (i = 0; i < MXSER_BOARDS; i++) - if (mxser_boards[i].info == NULL) - break; - - if (i >= MXSER_BOARDS) { - printk(KERN_ERR "Too many Smartio/Industio family boards found " - "(maximum %d), board not configured\n", MXSER_BOARDS); - goto err; - } - - brd = &mxser_boards[i]; - brd->idx = i * MXSER_PORTS_PER_BOARD; - printk(KERN_INFO "Found MOXA %s board (BusNo=%d, DevNo=%d)\n", - mxser_cards[ent->driver_data].name, - pdev->bus->number, PCI_SLOT(pdev->devfn)); - - retval = pci_enable_device(pdev); - if (retval) { - printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n"); - goto err; - } - - /* io address */ - ioaddress = pci_resource_start(pdev, 2); - retval = pci_request_region(pdev, 2, "mxser(IO)"); - if (retval) - goto err; - - brd->info = &mxser_cards[ent->driver_data]; - for (i = 0; i < brd->info->nports; i++) - brd->ports[i].ioaddr = ioaddress + 8 * i; - - /* vector */ - ioaddress = pci_resource_start(pdev, 3); - retval = pci_request_region(pdev, 3, "mxser(vector)"); - if (retval) - goto err_relio; - brd->vector = ioaddress; - - /* irq */ - brd->irq = pdev->irq; - - brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr); - brd->uart_type = PORT_16550A; - brd->vector_mask = 0; - - for (i = 0; i < brd->info->nports; i++) { - for (j = 0; j < UART_INFO_NUM; j++) { - if (Gpci_uart_info[j].type == brd->chip_flag) { - brd->ports[i].max_baud = - Gpci_uart_info[j].max_baud; - - /* exception....CP-102 */ - if (brd->info->flags & MXSER_HIGHBAUD) - brd->ports[i].max_baud = 921600; - break; - } - } - } - - if (brd->chip_flag == MOXA_MUST_MU860_HWID) { - for (i = 0; i < brd->info->nports; i++) { - if (i < 4) - brd->ports[i].opmode_ioaddr = ioaddress + 4; - else - brd->ports[i].opmode_ioaddr = ioaddress + 0x0c; - } - outb(0, ioaddress + 4); /* default set to RS232 mode */ - outb(0, ioaddress + 0x0c); /* default set to RS232 mode */ - } - - for (i = 0; i < brd->info->nports; i++) { - brd->vector_mask |= (1 << i); - brd->ports[i].baud_base = 921600; - } - - /* mxser_initbrd will hook ISR. */ - retval = mxser_initbrd(brd, pdev); - if (retval) - goto err_null; - - for (i = 0; i < brd->info->nports; i++) - tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev); - - pci_set_drvdata(pdev, brd); - - return 0; -err_relio: - pci_release_region(pdev, 2); -err_null: - brd->info = NULL; -err: - return retval; -#else - return -ENODEV; -#endif -} - -static void __devexit mxser_remove(struct pci_dev *pdev) -{ - struct mxser_board *brd = pci_get_drvdata(pdev); - unsigned int i; - - for (i = 0; i < brd->info->nports; i++) - tty_unregister_device(mxvar_sdriver, brd->idx + i); - - mxser_release_res(brd, pdev, 1); - brd->info = NULL; -} - -static struct pci_driver mxser_driver = { - .name = "mxser", - .id_table = mxser_pcibrds, - .probe = mxser_probe, - .remove = __devexit_p(mxser_remove) -}; - -static int __init mxser_module_init(void) -{ - struct mxser_board *brd; - unsigned long cap; - unsigned int i, m, isaloop; - int retval, b; - - pr_debug("Loading module mxser ...\n"); - - mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); - if (!mxvar_sdriver) - return -ENOMEM; - - printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", - MXSER_VERSION); - - /* Initialize the tty_driver structure */ - mxvar_sdriver->owner = THIS_MODULE; - mxvar_sdriver->magic = TTY_DRIVER_MAGIC; - mxvar_sdriver->name = "ttyMI"; - mxvar_sdriver->major = ttymajor; - mxvar_sdriver->minor_start = 0; - mxvar_sdriver->num = MXSER_PORTS + 1; - mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; - mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; - mxvar_sdriver->init_termios = tty_std_termios; - mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; - mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(mxvar_sdriver, &mxser_ops); - - retval = tty_register_driver(mxvar_sdriver); - if (retval) { - printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family " - "tty driver !\n"); - goto err_put; - } - - mxvar_diagflag = 0; - - m = 0; - /* Start finding ISA boards here */ - for (isaloop = 0; isaloop < 2; isaloop++) - for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { - if (!isaloop) - cap = mxserBoardCAP[b]; /* predefined */ - else - cap = ioaddr[b]; /* module param */ - - if (!cap) - continue; - - brd = &mxser_boards[m]; - retval = mxser_get_ISA_conf(cap, brd); - - if (retval != 0) - printk(KERN_INFO "Found MOXA %s board " - "(CAP=0x%x)\n", - brd->info->name, ioaddr[b]); - - if (retval <= 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR "Invalid interrupt " - "number, board not " - "configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR "Invalid interrupt " - "number, board not " - "configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR "Invalid interrupt " - "vector, board not " - "configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR "Invalid I/O address, " - "board not configured\n"); - - brd->info = NULL; - continue; - } - - /* mxser_initbrd will hook ISR. */ - if (mxser_initbrd(brd, NULL) < 0) { - brd->info = NULL; - continue; - } - - brd->idx = m * MXSER_PORTS_PER_BOARD; - for (i = 0; i < brd->info->nports; i++) - tty_register_device(mxvar_sdriver, brd->idx + i, - NULL); - - m++; - } - - retval = pci_register_driver(&mxser_driver); - if (retval) { - printk(KERN_ERR "Can't register pci driver\n"); - if (!m) { - retval = -ENODEV; - goto err_unr; - } /* else: we have some ISA cards under control */ - } - - pr_debug("Done.\n"); - - return 0; -err_unr: - tty_unregister_driver(mxvar_sdriver); -err_put: - put_tty_driver(mxvar_sdriver); - return retval; -} - -static void __exit mxser_module_exit(void) -{ - unsigned int i, j; - - pr_debug("Unloading module mxser ...\n"); - - pci_unregister_driver(&mxser_driver); - - for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */ - if (mxser_boards[i].info != NULL) - for (j = 0; j < mxser_boards[i].info->nports; j++) - tty_unregister_device(mxvar_sdriver, - mxser_boards[i].idx + j); - tty_unregister_driver(mxvar_sdriver); - put_tty_driver(mxvar_sdriver); - - for (i = 0; i < MXSER_BOARDS; i++) - if (mxser_boards[i].info != NULL) - mxser_release_res(&mxser_boards[i], NULL, 1); - - pr_debug("Done.\n"); -} - -module_init(mxser_module_init); -module_exit(mxser_module_exit); diff --git a/drivers/char/mxser_new.h b/drivers/char/mxser_new.h deleted file mode 100644 index d42f7766c65..00000000000 --- a/drivers/char/mxser_new.h +++ /dev/null @@ -1,293 +0,0 @@ -#ifndef _MXSER_H -#define _MXSER_H - -/* - * Semi-public control interfaces - */ - -/* - * MOXA ioctls - */ - -#define MOXA 0x400 -#define MOXA_GETDATACOUNT (MOXA + 23) -#define MOXA_GET_CONF (MOXA + 35) -#define MOXA_DIAGNOSE (MOXA + 50) -#define MOXA_CHKPORTENABLE (MOXA + 60) -#define MOXA_HighSpeedOn (MOXA + 61) -#define MOXA_GET_MAJOR (MOXA + 63) -#define MOXA_GET_CUMAJOR (MOXA + 64) -#define MOXA_GETMSTATUS (MOXA + 65) -#define MOXA_SET_OP_MODE (MOXA + 66) -#define MOXA_GET_OP_MODE (MOXA + 67) - -#define RS232_MODE 0 -#define RS485_2WIRE_MODE 1 -#define RS422_MODE 2 -#define RS485_4WIRE_MODE 3 -#define OP_MODE_MASK 3 - -#define MOXA_SDS_RSTICOUNTER (MOXA + 69) -#define MOXA_ASPP_OQUEUE (MOXA + 70) -#define MOXA_ASPP_SETBAUD (MOXA + 71) -#define MOXA_ASPP_GETBAUD (MOXA + 72) -#define MOXA_ASPP_MON (MOXA + 73) -#define MOXA_ASPP_LSTATUS (MOXA + 74) -#define MOXA_ASPP_MON_EXT (MOXA + 75) -#define MOXA_SET_BAUD_METHOD (MOXA + 76) -#define MOXA_SET_SPECIAL_BAUD_RATE (MOXA + 77) -#define MOXA_GET_SPECIAL_BAUD_RATE (MOXA + 78) - -/* --------------------------------------------------- */ - -#define NPPI_NOTIFY_PARITY 0x01 -#define NPPI_NOTIFY_FRAMING 0x02 -#define NPPI_NOTIFY_HW_OVERRUN 0x04 -#define NPPI_NOTIFY_SW_OVERRUN 0x08 -#define NPPI_NOTIFY_BREAK 0x10 - -#define NPPI_NOTIFY_CTSHOLD 0x01 /* Tx hold by CTS low */ -#define NPPI_NOTIFY_DSRHOLD 0x02 /* Tx hold by DSR low */ -#define NPPI_NOTIFY_XOFFHOLD 0x08 /* Tx hold by Xoff received */ -#define NPPI_NOTIFY_XOFFXENT 0x10 /* Xoff Sent */ - -/* follow just for Moxa Must chip define. */ -/* */ -/* when LCR register (offset 0x03) write following value, */ -/* the Must chip will enter enchance mode. And write value */ -/* on EFR (offset 0x02) bit 6,7 to change bank. */ -#define MOXA_MUST_ENTER_ENCHANCE 0xBF - -/* when enhance mode enable, access on general bank register */ -#define MOXA_MUST_GDL_REGISTER 0x07 -#define MOXA_MUST_GDL_MASK 0x7F -#define MOXA_MUST_GDL_HAS_BAD_DATA 0x80 - -#define MOXA_MUST_LSR_RERR 0x80 /* error in receive FIFO */ -/* enchance register bank select and enchance mode setting register */ -/* when LCR register equal to 0xBF */ -#define MOXA_MUST_EFR_REGISTER 0x02 -/* enchance mode enable */ -#define MOXA_MUST_EFR_EFRB_ENABLE 0x10 -/* enchance reister bank set 0, 1, 2 */ -#define MOXA_MUST_EFR_BANK0 0x00 -#define MOXA_MUST_EFR_BANK1 0x40 -#define MOXA_MUST_EFR_BANK2 0x80 -#define MOXA_MUST_EFR_BANK3 0xC0 -#define MOXA_MUST_EFR_BANK_MASK 0xC0 - -/* set XON1 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XON1_REGISTER 0x04 - -/* set XON2 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XON2_REGISTER 0x05 - -/* set XOFF1 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XOFF1_REGISTER 0x06 - -/* set XOFF2 value register, when LCR=0xBF and change to bank0 */ -#define MOXA_MUST_XOFF2_REGISTER 0x07 - -#define MOXA_MUST_RBRTL_REGISTER 0x04 -#define MOXA_MUST_RBRTH_REGISTER 0x05 -#define MOXA_MUST_RBRTI_REGISTER 0x06 -#define MOXA_MUST_THRTL_REGISTER 0x07 -#define MOXA_MUST_ENUM_REGISTER 0x04 -#define MOXA_MUST_HWID_REGISTER 0x05 -#define MOXA_MUST_ECR_REGISTER 0x06 -#define MOXA_MUST_CSR_REGISTER 0x07 - -/* good data mode enable */ -#define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20 -/* only good data put into RxFIFO */ -#define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10 - -/* enable CTS interrupt */ -#define MOXA_MUST_IER_ECTSI 0x80 -/* enable RTS interrupt */ -#define MOXA_MUST_IER_ERTSI 0x40 -/* enable Xon/Xoff interrupt */ -#define MOXA_MUST_IER_XINT 0x20 -/* enable GDA interrupt */ -#define MOXA_MUST_IER_EGDAI 0x10 - -#define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI) - -/* GDA interrupt pending */ -#define MOXA_MUST_IIR_GDA 0x1C -#define MOXA_MUST_IIR_RDA 0x04 -#define MOXA_MUST_IIR_RTO 0x0C -#define MOXA_MUST_IIR_LSR 0x06 - -/* recieved Xon/Xoff or specical interrupt pending */ -#define MOXA_MUST_IIR_XSC 0x10 - -/* RTS/CTS change state interrupt pending */ -#define MOXA_MUST_IIR_RTSCTS 0x20 -#define MOXA_MUST_IIR_MASK 0x3E - -#define MOXA_MUST_MCR_XON_FLAG 0x40 -#define MOXA_MUST_MCR_XON_ANY 0x80 -#define MOXA_MUST_MCR_TX_XON 0x08 - -/* software flow control on chip mask value */ -#define MOXA_MUST_EFR_SF_MASK 0x0F -/* send Xon1/Xoff1 */ -#define MOXA_MUST_EFR_SF_TX1 0x08 -/* send Xon2/Xoff2 */ -#define MOXA_MUST_EFR_SF_TX2 0x04 -/* send Xon1,Xon2/Xoff1,Xoff2 */ -#define MOXA_MUST_EFR_SF_TX12 0x0C -/* don't send Xon/Xoff */ -#define MOXA_MUST_EFR_SF_TX_NO 0x00 -/* Tx software flow control mask */ -#define MOXA_MUST_EFR_SF_TX_MASK 0x0C -/* don't receive Xon/Xoff */ -#define MOXA_MUST_EFR_SF_RX_NO 0x00 -/* receive Xon1/Xoff1 */ -#define MOXA_MUST_EFR_SF_RX1 0x02 -/* receive Xon2/Xoff2 */ -#define MOXA_MUST_EFR_SF_RX2 0x01 -/* receive Xon1,Xon2/Xoff1,Xoff2 */ -#define MOXA_MUST_EFR_SF_RX12 0x03 -/* Rx software flow control mask */ -#define MOXA_MUST_EFR_SF_RX_MASK 0x03 - -#define ENABLE_MOXA_MUST_ENCHANCE_MODE(baseio) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr |= MOXA_MUST_EFR_EFRB_ENABLE; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} while (0) - -#define DISABLE_MOXA_MUST_ENCHANCE_MODE(baseio) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} while (0) - -#define SET_MOXA_MUST_XON1_VALUE(baseio, Value) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK0; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb((u8)(Value), (baseio)+MOXA_MUST_XON1_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} while (0) - -#define SET_MOXA_MUST_XOFF1_VALUE(baseio, Value) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK0; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb((u8)(Value), (baseio)+MOXA_MUST_XOFF1_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} while (0) - -#define SET_MOXA_MUST_FIFO_VALUE(info) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((info)->ioaddr+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (info)->ioaddr+UART_LCR);\ - __efr = inb((info)->ioaddr+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK1; \ - outb(__efr, (info)->ioaddr+MOXA_MUST_EFR_REGISTER); \ - outb((u8)((info)->rx_high_water), (info)->ioaddr+ \ - MOXA_MUST_RBRTH_REGISTER); \ - outb((u8)((info)->rx_trigger), (info)->ioaddr+ \ - MOXA_MUST_RBRTI_REGISTER); \ - outb((u8)((info)->rx_low_water), (info)->ioaddr+ \ - MOXA_MUST_RBRTL_REGISTER); \ - outb(__oldlcr, (info)->ioaddr+UART_LCR); \ -} while (0) - -#define SET_MOXA_MUST_ENUM_VALUE(baseio, Value) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK2; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb((u8)(Value), (baseio)+MOXA_MUST_ENUM_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} while (0) - -#define GET_MOXA_MUST_HARDWARE_ID(baseio, pId) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_BANK_MASK; \ - __efr |= MOXA_MUST_EFR_BANK2; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - *pId = inb((baseio)+MOXA_MUST_HWID_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} while (0) - -#define SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(baseio) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_MASK; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} while (0) - -#define ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \ - __efr |= MOXA_MUST_EFR_SF_TX1; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} while (0) - -#define DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} while (0) - -#define ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \ - __efr |= MOXA_MUST_EFR_SF_RX1; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} while (0) - -#define DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) do { \ - u8 __oldlcr, __efr; \ - __oldlcr = inb((baseio)+UART_LCR); \ - outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \ - __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \ - __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \ - outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \ - outb(__oldlcr, (baseio)+UART_LCR); \ -} while (0) - -#endif diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index 596c7173997..46b2a1cc8b5 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -1,6 +1,6 @@ /* * n_tty.c --- implements the N_TTY line discipline. - * + * * This code used to be in tty_io.c, but things are getting hairy * enough that it made sense to split things off. (The N_TTY * processing has changed so much that it's hardly recognizable, @@ -8,19 +8,19 @@ * * Note that the open routine for N_TTY is guaranteed never to return * an error. This is because Linux will fall back to setting a line - * to N_TTY if it can not switch to any other line discipline. + * to N_TTY if it can not switch to any other line discipline. * * Written by Theodore Ts'o, Copyright 1994. - * + * * This file also contains code originally written by Linus Torvalds, * Copyright 1991, 1992, 1993, and by Julian Cowley, Copyright 1994. - * + * * This file may be redistributed under the terms of the GNU General Public * License. * * Reduced memory usage for older ARM systems - Russell King. * - * 2000/01/20 Fixed SMP locking on put_tty_queue using bits of + * 2000/01/20 Fixed SMP locking on put_tty_queue using bits of * the patch by Andrew J. Kroll <ag784@freenet.buffalo.edu> * who actually finally proved there really was a race. * @@ -144,11 +144,11 @@ static void put_tty_queue(unsigned char c, struct tty_struct *tty) * Can sleep, may be called under the atomic_read_lock mutex but * this is not guaranteed. */ - -static void check_unthrottle(struct tty_struct * tty) + +static void check_unthrottle(struct tty_struct *tty) { if (tty->count && - test_and_clear_bit(TTY_THROTTLED, &tty->flags) && + test_and_clear_bit(TTY_THROTTLED, &tty->flags) && tty->driver->unthrottle) tty->driver->unthrottle(tty); } @@ -157,7 +157,7 @@ static void check_unthrottle(struct tty_struct * tty) * reset_buffer_flags - reset buffer state * @tty: terminal to reset * - * Reset the read buffer counters, clear the flags, + * Reset the read buffer counters, clear the flags, * and make sure the driver is unthrottled. Called * from n_tty_open() and n_tty_flush_buffer(). */ @@ -186,12 +186,12 @@ static void reset_buffer_flags(struct tty_struct *tty) * FIXME: tty->ctrl_status is not spinlocked and relies on * lock_kernel() still. */ - -static void n_tty_flush_buffer(struct tty_struct * tty) + +static void n_tty_flush_buffer(struct tty_struct *tty) { /* clear everything and unthrottle the driver */ reset_buffer_flags(tty); - + if (!tty->link) return; @@ -206,9 +206,9 @@ static void n_tty_flush_buffer(struct tty_struct * tty) * @tty: tty device * * Report the number of characters buffered to be delivered to user - * at this instant in time. + * at this instant in time. */ - + static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty) { unsigned long flags; @@ -234,7 +234,7 @@ static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty) * character. We use this to correctly compute the on screen size * of the character when printing */ - + static inline int is_utf8_continuation(unsigned char c) { return (c & 0xc0) == 0x80; @@ -247,7 +247,7 @@ static inline int is_utf8_continuation(unsigned char c) * Returns true if the utf8 character 'c' is a multibyte continuation * character and the terminal is in unicode mode. */ - + static inline int is_continuation(unsigned char c, struct tty_struct *tty) { return I_IUTF8(tty) && is_utf8_continuation(c); @@ -266,7 +266,7 @@ static inline int is_continuation(unsigned char c, struct tty_struct *tty) * Called from both the receive and transmit sides and can be called * re-entrantly. Relies on lock_kernel() still. */ - + static int opost(unsigned char c, struct tty_struct *tty) { int space, spaces; @@ -339,9 +339,9 @@ static int opost(unsigned char c, struct tty_struct *tty) * * Called from write_chan under the tty layer write lock. */ - -static ssize_t opost_block(struct tty_struct * tty, - const unsigned char * buf, unsigned int nr) + +static ssize_t opost_block(struct tty_struct *tty, + const unsigned char *buf, unsigned int nr) { int space; int i; @@ -386,7 +386,7 @@ static ssize_t opost_block(struct tty_struct * tty, break_out: if (tty->driver->flush_chars) tty->driver->flush_chars(tty); - i = tty->driver->write(tty, buf, i); + i = tty->driver->write(tty, buf, i); return i; } @@ -398,7 +398,7 @@ break_out: * * Queue a byte to the driver layer for output */ - + static inline void put_char(unsigned char c, struct tty_struct *tty) { tty->driver->put_char(tty, c); @@ -409,7 +409,7 @@ static inline void put_char(unsigned char c, struct tty_struct *tty) * @c: unicode byte to echo * @tty: terminal device * - * Echo user input back onto the screen. This must be called only when + * Echo user input back onto the screen. This must be called only when * L_ECHO(tty) is true. Called from the driver receive_buf path. */ @@ -441,7 +441,7 @@ static inline void finish_erasing(struct tty_struct *tty) * present in the stream from the driver layer. Handles the complexities * of UTF-8 multibyte symbols. */ - + static void eraser(unsigned char c, struct tty_struct *tty) { enum { ERASE, WERASE, KILL } kill_type; @@ -541,7 +541,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) /* should never happen */ if (tty->column > 0x80000000) - tty->column = 0; + tty->column = 0; /* Now backup to that column. */ while (tty->column > col) { @@ -585,7 +585,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) * settings and character used. Called from the driver receive_buf * path so serialized. */ - + static inline void isig(int sig, struct tty_struct *tty, int flush) { if (tty->pgrp) @@ -606,7 +606,7 @@ static inline void isig(int sig, struct tty_struct *tty, int flush) * * Called from the receive_buf path so single threaded. */ - + static inline void n_tty_receive_break(struct tty_struct *tty) { if (I_IGNBRK(tty)) @@ -635,7 +635,7 @@ static inline void n_tty_receive_break(struct tty_struct *tty) * need locking as num_overrun and overrun_time are function * private. */ - + static inline void n_tty_receive_overrun(struct tty_struct *tty) { char buf[64]; @@ -662,9 +662,8 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty) static inline void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c) { - if (I_IGNPAR(tty)) { + if (I_IGNPAR(tty)) return; - } if (I_PARMRK(tty)) { put_tty_queue('\377', tty); put_tty_queue('\0', tty); @@ -682,7 +681,7 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty, * @c: character * * Process an individual character of input received from the driver. - * This is serialized with respect to itself by the rules for the + * This is serialized with respect to itself by the rules for the * driver above. */ @@ -694,18 +693,17 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) put_tty_queue(c, tty); return; } - - if (tty->stopped && !tty->flow_stopped && - I_IXON(tty) && I_IXANY(tty)) { - start_tty(tty); - return; - } - + if (I_ISTRIP(tty)) c &= 0x7f; if (I_IUCLC(tty) && L_IEXTEN(tty)) c=tolower(c); + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && + ((I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty)) || + c == INTR_CHAR(tty) || c == QUIT_CHAR(tty))) + start_tty(tty); + if (tty->closing) { if (I_IXON(tty)) { if (c == START_CHAR(tty)) @@ -740,7 +738,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) put_tty_queue(c, tty); return; } - + if (c == '\r') { if (I_IGNCR(tty)) return; @@ -769,7 +767,21 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) signal = SIGTSTP; if (c == SUSP_CHAR(tty)) { send_signal: - isig(signal, tty, 0); + /* + * Echo character, and then send the signal. + * Note that we do not use isig() here because we want + * the order to be: + * 1) flush, 2) echo, 3) signal + */ + if (!L_NOFLSH(tty)) { + n_tty_flush_buffer(tty); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + } + if (L_ECHO(tty)) + echo_char(c, tty); + if (tty->pgrp) + kill_pgrp(tty->pgrp, signal, 1); return; } } @@ -812,8 +824,8 @@ send_signal: goto handle_newline; } if (c == EOF_CHAR(tty)) { - if (tty->canon_head != tty->read_head) - set_bit(TTY_PUSH, &tty->flags); + if (tty->canon_head != tty->read_head) + set_bit(TTY_PUSH, &tty->flags); c = __DISABLED_CHAR; goto handle_newline; } @@ -837,7 +849,7 @@ send_signal: if (I_PARMRK(tty) && c == (unsigned char) '\377') put_tty_queue(c, tty); - handle_newline: +handle_newline: spin_lock_irqsave(&tty->read_lock, flags); set_bit(tty->read_head, tty->read_flags); put_tty_queue_nolock(c, tty); @@ -850,7 +862,7 @@ send_signal: return; } } - + finish_erasing(tty); if (L_ECHO(tty)) { if (tty->read_cnt >= N_TTY_BUF_SIZE-1) { @@ -871,7 +883,7 @@ send_signal: put_tty_queue(c, tty); put_tty_queue(c, tty); -} +} /** @@ -885,12 +897,10 @@ send_signal: static void n_tty_write_wakeup(struct tty_struct *tty) { - if (tty->fasync) - { - set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + if (tty->fasync) { + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); kill_fasync(&tty->fasync, SIGIO, POLL_OUT); } - return; } /** @@ -905,7 +915,7 @@ static void n_tty_write_wakeup(struct tty_struct *tty) * not from interrupt context. The driver is responsible for making * calls one at a time and in order (or using flush_to_ldisc) */ - + static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { @@ -937,7 +947,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, tty->read_cnt += i; spin_unlock_irqrestore(&tty->read_lock, cpuflags); } else { - for (i=count, p = cp, f = fp; i; i--, p++) { + for (i = count, p = cp, f = fp; i; i--, p++) { if (f) flags = *f++; switch (flags) { @@ -955,7 +965,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, n_tty_receive_overrun(tty); break; default: - printk("%s: unknown flag %d\n", + printk(KERN_ERR "%s: unknown flag %d\n", tty_name(tty, buf), flags); break; } @@ -988,7 +998,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, int is_ignored(int sig) { return (sigismember(¤t->blocked, sig) || - current->sighand->action[sig-1].sa.sa_handler == SIG_IGN); + current->sighand->action[sig-1].sa.sa_handler == SIG_IGN); } /** @@ -998,16 +1008,16 @@ int is_ignored(int sig) * * Called by the tty layer when the user changes termios flags so * that the line discipline can plan ahead. This function cannot sleep - * and is protected from re-entry by the tty layer. The user is + * and is protected from re-entry by the tty layer. The user is * guaranteed that this function will not be re-entered or in progress * when the ldisc is closed. */ - -static void n_tty_set_termios(struct tty_struct *tty, struct ktermios * old) + +static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) { if (!tty) return; - + tty->icanon = (L_ICANON(tty) != 0); if (test_bit(TTY_HW_COOK_IN, &tty->flags)) { tty->raw = 1; @@ -1072,12 +1082,12 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios * old) * n_tty_close - close the ldisc for this tty * @tty: device * - * Called from the terminal layer when this line discipline is - * being shut down, either because of a close or becsuse of a + * Called from the terminal layer when this line discipline is + * being shut down, either because of a close or becsuse of a * discipline change. The function will not be called while other * ldisc methods are in progress. */ - + static void n_tty_close(struct tty_struct *tty) { n_tty_flush_buffer(tty); @@ -1091,7 +1101,7 @@ static void n_tty_close(struct tty_struct *tty) * n_tty_open - open an ldisc * @tty: terminal to open * - * Called when this line discipline is being attached to the + * Called when this line discipline is being attached to the * terminal device. Can sleep. Called serialized so that no * other events will occur in parallel. No further open will occur * until a close. @@ -1144,7 +1154,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt) * Called under the tty->atomic_read_lock sem * */ - + static int copy_from_read_buf(struct tty_struct *tty, unsigned char __user **b, size_t *nr) @@ -1173,7 +1183,8 @@ static int copy_from_read_buf(struct tty_struct *tty, return retval; } -extern ssize_t redirected_tty_write(struct file *,const char *,size_t,loff_t *); +extern ssize_t redirected_tty_write(struct file *, const char *, + size_t, loff_t *); /** * job_control - check job control @@ -1181,10 +1192,10 @@ extern ssize_t redirected_tty_write(struct file *,const char *,size_t,loff_t *); * @file: file handle * * Perform job control management checks on this file/tty descriptor - * and if appropriate send any needed signals and return a negative + * and if appropriate send any needed signals and return a negative * error code if action should be taken. */ - + static int job_control(struct tty_struct *tty, struct file *file) { /* Job control check -- must be done at start and after @@ -1195,7 +1206,7 @@ static int job_control(struct tty_struct *tty, struct file *file) if (file->f_op->write != redirected_tty_write && current->signal->tty == tty) { if (!tty->pgrp) - printk("read_chan: no tty->pgrp!\n"); + printk(KERN_ERR "read_chan: no tty->pgrp!\n"); else if (task_pgrp(current) != tty->pgrp) { if (is_ignored(SIGTTIN) || is_current_pgrp_orphaned()) @@ -1207,7 +1218,7 @@ static int job_control(struct tty_struct *tty, struct file *file) } return 0; } - + /** * read_chan - read function for tty @@ -1223,7 +1234,7 @@ static int job_control(struct tty_struct *tty, struct file *file) * * This code must be sure never to sleep through a hangup. */ - + static ssize_t read_chan(struct tty_struct *tty, struct file *file, unsigned char __user *buf, size_t nr) { @@ -1239,14 +1250,14 @@ static ssize_t read_chan(struct tty_struct *tty, struct file *file, do_it_again: if (!tty->read_buf) { - printk("n_tty_read_chan: called with read_buf == NULL?!?\n"); + printk(KERN_ERR "n_tty_read_chan: read_buf == NULL?!?\n"); return -EIO; } c = job_control(tty, file); - if(c < 0) + if (c < 0) return c; - + minimum = time = 0; timeout = MAX_SCHEDULE_TIMEOUT; if (!tty->icanon) { @@ -1274,8 +1285,7 @@ do_it_again: if (file->f_flags & O_NONBLOCK) { if (!mutex_trylock(&tty->atomic_read_lock)) return -EAGAIN; - } - else { + } else { if (mutex_lock_interruptible(&tty->atomic_read_lock)) return -ERESTARTSYS; } @@ -1301,11 +1311,11 @@ do_it_again: so that any interrupt will set the state back to TASK_RUNNING. */ set_current_state(TASK_INTERRUPTIBLE); - + if (((minimum - (b - buf)) < tty->minimum_to_wake) && ((minimum - (b - buf)) >= 1)) tty->minimum_to_wake = (minimum - (b - buf)); - + if (!input_available_p(tty, 0)) { if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { retval = -EIO; @@ -1342,7 +1352,7 @@ do_it_again: if (tty->icanon) { /* N.B. avoid overrun if nr == 0 */ while (nr && tty->read_cnt) { - int eol; + int eol; eol = test_and_clear_bit(tty->read_tail, tty->read_flags); @@ -1414,7 +1424,7 @@ do_it_again: if (size) { retval = size; if (nr) - clear_bit(TTY_PUSH, &tty->flags); + clear_bit(TTY_PUSH, &tty->flags); } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) goto do_it_again; @@ -1437,9 +1447,9 @@ do_it_again: * * This code must be sure never to sleep through a hangup. */ - -static ssize_t write_chan(struct tty_struct * tty, struct file * file, - const unsigned char * buf, size_t nr) + +static ssize_t write_chan(struct tty_struct *tty, struct file *file, + const unsigned char *buf, size_t nr) { const unsigned char *b = buf; DECLARE_WAITQUEUE(wait, current); @@ -1529,8 +1539,9 @@ break_out: * recompute the new limits. Possibly set_termios should issue * a read wakeup to fix this bug. */ - -static unsigned int normal_poll(struct tty_struct * tty, struct file * file, poll_table *wait) + +static unsigned int normal_poll(struct tty_struct *tty, struct file *file, + poll_table *wait) { unsigned int mask = 0; diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig index f25facd97bb..ffa0efce0ae 100644 --- a/drivers/char/pcmcia/Kconfig +++ b/drivers/char/pcmcia/Kconfig @@ -43,5 +43,14 @@ config CARDMAN_4040 (http://www.omnikey.com/), or a current development version of OpenCT (http://www.opensc.org/). +config IPWIRELESS + tristate "IPWireless 3G UMTS PCMCIA card support" + depends on PCMCIA && NETDEVICES + select PPP + help + This is a driver for 3G UMTS PCMCIA card from IPWireless company. In + some countries (for example Czech Republic, T-Mobile ISP) this card + is shipped for service called UMTS 4G. + endmenu diff --git a/drivers/char/pcmcia/Makefile b/drivers/char/pcmcia/Makefile index 0aae20985d5..be8f287aa39 100644 --- a/drivers/char/pcmcia/Makefile +++ b/drivers/char/pcmcia/Makefile @@ -4,6 +4,8 @@ # Makefile for the Linux PCMCIA char device drivers. # +obj-y += ipwireless/ + obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 02518da6a38..454d7324ba4 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -308,7 +308,8 @@ static unsigned int calc_baudv(unsigned char fidi) return (wcrcf / wbrcf); } -static unsigned short io_read_num_rec_bytes(ioaddr_t iobase, unsigned short *s) +static unsigned short io_read_num_rec_bytes(unsigned int iobase, + unsigned short *s) { unsigned short tmp; @@ -426,7 +427,7 @@ static struct card_fixup card_fixups[] = { static void set_cardparameter(struct cm4000_dev *dev) { int i; - ioaddr_t iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->io.BasePort1; u_int8_t stopbits = 0x02; /* ISO default */ DEBUGP(3, dev, "-> set_cardparameter\n"); @@ -459,7 +460,7 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq) unsigned short num_bytes_read; unsigned char pts_reply[4]; ssize_t rc; - ioaddr_t iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->io.BasePort1; rc = 0; @@ -610,7 +611,7 @@ exit_setprotocol: return rc; } -static int io_detect_cm4000(ioaddr_t iobase, struct cm4000_dev *dev) +static int io_detect_cm4000(unsigned int iobase, struct cm4000_dev *dev) { /* note: statemachine is assumed to be reset */ @@ -671,7 +672,7 @@ static void terminate_monitor(struct cm4000_dev *dev) static void monitor_card(unsigned long p) { struct cm4000_dev *dev = (struct cm4000_dev *) p; - ioaddr_t iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->io.BasePort1; unsigned short s; struct ptsreq ptsreq; int i, atrc; @@ -933,7 +934,7 @@ static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count, loff_t *ppos) { struct cm4000_dev *dev = filp->private_data; - ioaddr_t iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->io.BasePort1; ssize_t rc; int i, j, k; @@ -1054,7 +1055,7 @@ static ssize_t cmm_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos) { struct cm4000_dev *dev = (struct cm4000_dev *) filp->private_data; - ioaddr_t iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->io.BasePort1; unsigned short s; unsigned char tmp; unsigned char infolen; @@ -1408,7 +1409,7 @@ static int cmm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) { struct cm4000_dev *dev = filp->private_data; - ioaddr_t iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->io.BasePort1; struct pcmcia_device *link; int size; int rc; diff --git a/drivers/char/pcmcia/ipwireless/Makefile b/drivers/char/pcmcia/ipwireless/Makefile new file mode 100644 index 00000000000..b71eb593643 --- /dev/null +++ b/drivers/char/pcmcia/ipwireless/Makefile @@ -0,0 +1,10 @@ +# +# drivers/char/pcmcia/ipwireless/Makefile +# +# Makefile for the IPWireless driver +# + +obj-$(CONFIG_IPWIRELESS) += ipwireless.o + +ipwireless-objs := hardware.o main.o network.o tty.o + diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c new file mode 100644 index 00000000000..1f978ff87fa --- /dev/null +++ b/drivers/char/pcmcia/ipwireless/hardware.c @@ -0,0 +1,1787 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath <stephen@blacksapphire.com>, + * Ben Martel <benm@symmetric.co.nz> + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/slab.h> + +#include "hardware.h" +#include "setup_protocol.h" +#include "network.h" +#include "main.h" + +static void ipw_send_setup_packet(struct ipw_hardware *hw); +static void handle_received_SETUP_packet(struct ipw_hardware *ipw, + unsigned int address, + unsigned char *data, int len, + int is_last); +static void ipwireless_setup_timer(unsigned long data); +static void handle_received_CTRL_packet(struct ipw_hardware *hw, + unsigned int channel_idx, unsigned char *data, int len); + +/*#define TIMING_DIAGNOSTICS*/ + +#ifdef TIMING_DIAGNOSTICS + +static struct timing_stats { + unsigned long last_report_time; + unsigned long read_time; + unsigned long write_time; + unsigned long read_bytes; + unsigned long write_bytes; + unsigned long start_time; +}; + +static void start_timing(void) +{ + timing_stats.start_time = jiffies; +} + +static void end_read_timing(unsigned length) +{ + timing_stats.read_time += (jiffies - start_time); + timing_stats.read_bytes += length + 2; + report_timing(); +} + +static void end_write_timing(unsigned length) +{ + timing_stats.write_time += (jiffies - start_time); + timing_stats.write_bytes += length + 2; + report_timing(); +} + +static void report_timing(void) +{ + unsigned long since = jiffies - timing_stats.last_report_time; + + /* If it's been more than one second... */ + if (since >= HZ) { + int first = (timing_stats.last_report_time == 0); + + timing_stats.last_report_time = jiffies; + if (!first) + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": %u us elapsed - read %lu bytes in %u us, " + "wrote %lu bytes in %u us\n", + jiffies_to_usecs(since), + timing_stats.read_bytes, + jiffies_to_usecs(timing_stats.read_time), + timing_stats.write_bytes, + jiffies_to_usecs(timing_stats.write_time)); + + timing_stats.read_time = 0; + timing_stats.write_time = 0; + timing_stats.read_bytes = 0; + timing_stats.write_bytes = 0; + } +} +#else +static void start_timing(void) { } +static void end_read_timing(unsigned length) { } +static void end_write_timing(unsigned length) { } +#endif + +/* Imported IPW definitions */ + +#define LL_MTU_V1 318 +#define LL_MTU_V2 250 +#define LL_MTU_MAX (LL_MTU_V1 > LL_MTU_V2 ? LL_MTU_V1 : LL_MTU_V2) + +#define PRIO_DATA 2 +#define PRIO_CTRL 1 +#define PRIO_SETUP 0 + +/* Addresses */ +#define ADDR_SETUP_PROT 0 + +/* Protocol ids */ +enum { + /* Identifier for the Com Data protocol */ + TL_PROTOCOLID_COM_DATA = 0, + + /* Identifier for the Com Control protocol */ + TL_PROTOCOLID_COM_CTRL = 1, + + /* Identifier for the Setup protocol */ + TL_PROTOCOLID_SETUP = 2 +}; + +/* Number of bytes in NL packet header (cannot do + * sizeof(nl_packet_header) since it's a bitfield) */ +#define NL_FIRST_PACKET_HEADER_SIZE 3 + +/* Number of bytes in NL packet header (cannot do + * sizeof(nl_packet_header) since it's a bitfield) */ +#define NL_FOLLOWING_PACKET_HEADER_SIZE 1 + +struct nl_first_packet_header { +#if defined(__BIG_ENDIAN_BITFIELD) + unsigned char packet_rank:2; + unsigned char address:3; + unsigned char protocol:3; +#else + unsigned char protocol:3; + unsigned char address:3; + unsigned char packet_rank:2; +#endif + unsigned char length_lsb; + unsigned char length_msb; +}; + +struct nl_packet_header { +#if defined(__BIG_ENDIAN_BITFIELD) + unsigned char packet_rank:2; + unsigned char address:3; + unsigned char protocol:3; +#else + unsigned char protocol:3; + unsigned char address:3; + unsigned char packet_rank:2; +#endif +}; + +/* Value of 'packet_rank' above */ +#define NL_INTERMEDIATE_PACKET 0x0 +#define NL_LAST_PACKET 0x1 +#define NL_FIRST_PACKET 0x2 + +union nl_packet { + /* Network packet header of the first packet (a special case) */ + struct nl_first_packet_header hdr_first; + /* Network packet header of the following packets (if any) */ + struct nl_packet_header hdr; + /* Complete network packet (header + data) */ + unsigned char rawpkt[LL_MTU_MAX]; +} __attribute__ ((__packed__)); + +#define HW_VERSION_UNKNOWN -1 +#define HW_VERSION_1 1 +#define HW_VERSION_2 2 + +/* IPW I/O ports */ +#define IOIER 0x00 /* Interrupt Enable Register */ +#define IOIR 0x02 /* Interrupt Source/ACK register */ +#define IODCR 0x04 /* Data Control Register */ +#define IODRR 0x06 /* Data Read Register */ +#define IODWR 0x08 /* Data Write Register */ +#define IOESR 0x0A /* Embedded Driver Status Register */ +#define IORXR 0x0C /* Rx Fifo Register (Host to Embedded) */ +#define IOTXR 0x0E /* Tx Fifo Register (Embedded to Host) */ + +/* I/O ports and bit definitions for version 1 of the hardware */ + +/* IER bits*/ +#define IER_RXENABLED 0x1 +#define IER_TXENABLED 0x2 + +/* ISR bits */ +#define IR_RXINTR 0x1 +#define IR_TXINTR 0x2 + +/* DCR bits */ +#define DCR_RXDONE 0x1 +#define DCR_TXDONE 0x2 +#define DCR_RXRESET 0x4 +#define DCR_TXRESET 0x8 + +/* I/O ports and bit definitions for version 2 of the hardware */ + +struct MEMCCR { + unsigned short reg_config_option; /* PCCOR: Configuration Option Register */ + unsigned short reg_config_and_status; /* PCCSR: Configuration and Status Register */ + unsigned short reg_pin_replacement; /* PCPRR: Pin Replacemant Register */ + unsigned short reg_socket_and_copy; /* PCSCR: Socket and Copy Register */ + unsigned short reg_ext_status; /* PCESR: Extendend Status Register */ + unsigned short reg_io_base; /* PCIOB: I/O Base Register */ +}; + +struct MEMINFREG { + unsigned short memreg_tx_old; /* TX Register (R/W) */ + unsigned short pad1; + unsigned short memreg_rx_done; /* RXDone Register (R/W) */ + unsigned short pad2; + unsigned short memreg_rx; /* RX Register (R/W) */ + unsigned short pad3; + unsigned short memreg_pc_interrupt_ack; /* PC intr Ack Register (W) */ + unsigned short pad4; + unsigned long memreg_card_present;/* Mask for Host to check (R) for + * CARD_PRESENT_VALUE */ + unsigned short memreg_tx_new; /* TX2 (new) Register (R/W) */ +}; + +#define IODMADPR 0x00 /* DMA Data Port Register (R/W) */ + +#define CARD_PRESENT_VALUE (0xBEEFCAFEUL) + +#define MEMTX_TX 0x0001 +#define MEMRX_RX 0x0001 +#define MEMRX_RX_DONE 0x0001 +#define MEMRX_PCINTACKK 0x0001 +#define MEMRX_MEMSPURIOUSINT 0x0001 + +#define NL_NUM_OF_PRIORITIES 3 +#define NL_NUM_OF_PROTOCOLS 3 +#define NL_NUM_OF_ADDRESSES NO_OF_IPW_CHANNELS + +struct ipw_hardware { + unsigned int base_port; + short hw_version; + unsigned short ll_mtu; + spinlock_t spinlock; + + int initializing; + int init_loops; + struct timer_list setup_timer; + + int tx_ready; + struct list_head tx_queue[NL_NUM_OF_PRIORITIES]; + /* True if any packets are queued for transmission */ + int tx_queued; + + int rx_bytes_queued; + struct list_head rx_queue; + /* Pool of rx_packet structures that are not currently used. */ + struct list_head rx_pool; + int rx_pool_size; + /* True if reception of data is blocked while userspace processes it. */ + int blocking_rx; + /* True if there is RX data ready on the hardware. */ + int rx_ready; + unsigned short last_memtx_serial; + /* + * Newer versions of the V2 card firmware send serial numbers in the + * MemTX register. 'serial_number_detected' is set true when we detect + * a non-zero serial number (indicating the new firmware). Thereafter, + * the driver can safely ignore the Timer Recovery re-sends to avoid + * out-of-sync problems. + */ + int serial_number_detected; + struct work_struct work_rx; + + /* True if we are to send the set-up data to the hardware. */ + int to_setup; + + /* Card has been removed */ + int removed; + /* Saved irq value when we disable the interrupt. */ + int irq; + /* True if this driver is shutting down. */ + int shutting_down; + /* Modem control lines */ + unsigned int control_lines[NL_NUM_OF_ADDRESSES]; + struct ipw_rx_packet *packet_assembler[NL_NUM_OF_ADDRESSES]; + + struct tasklet_struct tasklet; + + /* The handle for the network layer, for the sending of events to it. */ + struct ipw_network *network; + struct MEMINFREG __iomem *memory_info_regs; + struct MEMCCR __iomem *memregs_CCR; + void (*reboot_callback) (void *data); + void *reboot_callback_data; + + unsigned short __iomem *memreg_tx; +}; + +/* + * Packet info structure for tx packets. + * Note: not all the fields defined here are required for all protocols + */ +struct ipw_tx_packet { + struct list_head queue; + /* channel idx + 1 */ + unsigned char dest_addr; + /* SETUP, CTRL or DATA */ + unsigned char protocol; + /* Length of data block, which starts at the end of this structure */ + unsigned short length; + /* Sending state */ + /* Offset of where we've sent up to so far */ + unsigned long offset; + /* Count of packet fragments, starting at 0 */ + int fragment_count; + + /* Called after packet is sent and before is freed */ + void (*packet_callback) (void *cb_data, unsigned int packet_length); + void *callback_data; +}; + +/* Signals from DTE */ +#define COMCTRL_RTS 0 +#define COMCTRL_DTR 1 + +/* Signals from DCE */ +#define COMCTRL_CTS 2 +#define COMCTRL_DCD 3 +#define COMCTRL_DSR 4 +#define COMCTRL_RI 5 + +struct ipw_control_packet_body { + /* DTE signal or DCE signal */ + unsigned char sig_no; + /* 0: set signal, 1: clear signal */ + unsigned char value; +} __attribute__ ((__packed__)); + +struct ipw_control_packet { + struct ipw_tx_packet header; + struct ipw_control_packet_body body; +}; + +struct ipw_rx_packet { + struct list_head queue; + unsigned int capacity; + unsigned int length; + unsigned int protocol; + unsigned int channel_idx; +}; + +#ifdef IPWIRELESS_STATE_DEBUG +int ipwireless_dump_hardware_state(char *p, size_t limit, + struct ipw_hardware *hw) +{ + return snprintf(p, limit, + "debug: initializing=%d\n" + "debug: tx_ready=%d\n" + "debug: tx_queued=%d\n" + "debug: rx_ready=%d\n" + "debug: rx_bytes_queued=%d\n" + "debug: blocking_rx=%d\n" + "debug: removed=%d\n" + "debug: hardware.shutting_down=%d\n" + "debug: to_setup=%d\n", + hw->initializing, + hw->tx_ready, + hw->tx_queued, + hw->rx_ready, + hw->rx_bytes_queued, + hw->blocking_rx, + hw->removed, + hw->shutting_down, + hw->to_setup); +} +#endif + +static char *data_type(const unsigned char *buf, unsigned length) +{ + struct nl_packet_header *hdr = (struct nl_packet_header *) buf; + + if (length == 0) + return " "; + + if (hdr->packet_rank & NL_FIRST_PACKET) { + switch (hdr->protocol) { + case TL_PROTOCOLID_COM_DATA: return "DATA "; + case TL_PROTOCOLID_COM_CTRL: return "CTRL "; + case TL_PROTOCOLID_SETUP: return "SETUP"; + default: return "???? "; + } + } else + return " "; +} + +#define DUMP_MAX_BYTES 64 + +static void dump_data_bytes(const char *type, const unsigned char *data, + unsigned length) +{ + char prefix[56]; + + sprintf(prefix, IPWIRELESS_PCCARD_NAME ": %s %s ", + type, data_type(data, length)); + print_hex_dump_bytes(prefix, 0, (void *)data, + length < DUMP_MAX_BYTES ? length : DUMP_MAX_BYTES); +} + +static int do_send_fragment(struct ipw_hardware *hw, const unsigned char *data, + unsigned length) +{ + int i; + unsigned long flags; + + start_timing(); + + if (length == 0) + return 0; + + if (length > hw->ll_mtu) + return -1; + + if (ipwireless_debug) + dump_data_bytes("send", data, length); + + spin_lock_irqsave(&hw->spinlock, flags); + + if (hw->hw_version == HW_VERSION_1) { + outw((unsigned short) length, hw->base_port + IODWR); + + for (i = 0; i < length; i += 2) { + unsigned short d = data[i]; + __le16 raw_data; + + if (likely(i + 1 < length)) + d |= data[i + 1] << 8; + raw_data = cpu_to_le16(d); + outw(raw_data, hw->base_port + IODWR); + } + + outw(DCR_TXDONE, hw->base_port + IODCR); + } else if (hw->hw_version == HW_VERSION_2) { + outw((unsigned short) length, hw->base_port + IODMADPR); + + for (i = 0; i < length; i += 2) { + unsigned short d = data[i]; + __le16 raw_data; + + if ((i + 1 < length)) + d |= data[i + 1] << 8; + raw_data = cpu_to_le16(d); + outw(raw_data, hw->base_port + IODMADPR); + } + while ((i & 3) != 2) { + outw((unsigned short) 0xDEAD, hw->base_port + IODMADPR); + i += 2; + } + writew(MEMRX_RX, &hw->memory_info_regs->memreg_rx); + } + + spin_unlock_irqrestore(&hw->spinlock, flags); + + end_write_timing(length); + + return 0; +} + +static int do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet) +{ + unsigned short fragment_data_len; + unsigned short data_left = packet->length - packet->offset; + unsigned short header_size; + union nl_packet pkt; + + header_size = + (packet->fragment_count == 0) + ? NL_FIRST_PACKET_HEADER_SIZE + : NL_FOLLOWING_PACKET_HEADER_SIZE; + fragment_data_len = hw->ll_mtu - header_size; + if (data_left < fragment_data_len) + fragment_data_len = data_left; + + pkt.hdr_first.protocol = packet->protocol; + pkt.hdr_first.address = packet->dest_addr; + pkt.hdr_first.packet_rank = 0; + + /* First packet? */ + if (packet->fragment_count == 0) { + pkt.hdr_first.packet_rank |= NL_FIRST_PACKET; + pkt.hdr_first.length_lsb = (unsigned char) packet->length; + pkt.hdr_first.length_msb = + (unsigned char) (packet->length >> 8); + } + + memcpy(pkt.rawpkt + header_size, + ((unsigned char *) packet) + sizeof(struct ipw_tx_packet) + + packet->offset, fragment_data_len); + packet->offset += fragment_data_len; + packet->fragment_count++; + + /* Last packet? (May also be first packet.) */ + if (packet->offset == packet->length) + pkt.hdr_first.packet_rank |= NL_LAST_PACKET; + do_send_fragment(hw, pkt.rawpkt, header_size + fragment_data_len); + + /* If this packet has unsent data, then re-queue it. */ + if (packet->offset < packet->length) { + /* + * Re-queue it at the head of the highest priority queue so + * it goes before all other packets + */ + unsigned long flags; + + spin_lock_irqsave(&hw->spinlock, flags); + list_add(&packet->queue, &hw->tx_queue[0]); + spin_unlock_irqrestore(&hw->spinlock, flags); + } else { + if (packet->packet_callback) + packet->packet_callback(packet->callback_data, + packet->length); + kfree(packet); + } + + return 0; +} + +static void ipw_setup_hardware(struct ipw_hardware *hw) +{ + unsigned long flags; + + spin_lock_irqsave(&hw->spinlock, flags); + if (hw->hw_version == HW_VERSION_1) { + /* Reset RX FIFO */ + outw(DCR_RXRESET, hw->base_port + IODCR); + /* SB: Reset TX FIFO */ + outw(DCR_TXRESET, hw->base_port + IODCR); + + /* Enable TX and RX interrupts. */ + outw(IER_TXENABLED | IER_RXENABLED, hw->base_port + IOIER); + } else { + /* + * Set INTRACK bit (bit 0), which means we must explicitly + * acknowledge interrupts by clearing bit 2 of reg_config_and_status. + */ + unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status); + + csr |= 1; + writew(csr, &hw->memregs_CCR->reg_config_and_status); + } + spin_unlock_irqrestore(&hw->spinlock, flags); +} + +/* + * If 'packet' is NULL, then this function allocates a new packet, setting its + * length to 0 and ensuring it has the specified minimum amount of free space. + * + * If 'packet' is not NULL, then this function enlarges it if it doesn't + * have the specified minimum amount of free space. + * + */ +static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw, + struct ipw_rx_packet *packet, + int minimum_free_space) +{ + + if (!packet) { + unsigned long flags; + + /* + * If this is the first fragment, then we will need to fetch a + * packet to put it in. + */ + spin_lock_irqsave(&hw->spinlock, flags); + /* If we have one in our pool, then pull it out. */ + if (!list_empty(&hw->rx_pool)) { + packet = list_first_entry(&hw->rx_pool, + struct ipw_rx_packet, queue); + list_del(&packet->queue); + hw->rx_pool_size--; + spin_unlock_irqrestore(&hw->spinlock, flags); + } else { + /* Otherwise allocate a new one. */ + static int min_capacity = 256; + int new_capacity; + + spin_unlock_irqrestore(&hw->spinlock, flags); + new_capacity = + minimum_free_space > min_capacity + ? minimum_free_space + : min_capacity; + packet = kmalloc(sizeof(struct ipw_rx_packet) + + new_capacity, GFP_ATOMIC); + if (!packet) + return NULL; + packet->capacity = new_capacity; + } + packet->length = 0; + } + + /* + * If this packet does not have sufficient capacity for the data we + * want to add, then make it bigger. + */ + if (packet->length + minimum_free_space > packet->capacity) { + struct ipw_rx_packet *old_packet = packet; + + packet = kmalloc(sizeof(struct ipw_rx_packet) + + old_packet->length + minimum_free_space, + GFP_ATOMIC); + if (!packet) + return NULL; + memcpy(packet, old_packet, + sizeof(struct ipw_rx_packet) + + old_packet->length); + packet->capacity = old_packet->length + minimum_free_space; + kfree(old_packet); + } + + return packet; +} + +static void pool_free(struct ipw_hardware *hw, struct ipw_rx_packet *packet) +{ + if (hw->rx_pool_size > 6) + kfree(packet); + else { + hw->rx_pool_size++; + list_add_tail(&packet->queue, &hw->rx_pool); + } +} + +static void queue_received_packet(struct ipw_hardware *hw, + unsigned int protocol, unsigned int address, + unsigned char *data, int length, int is_last) +{ + unsigned int channel_idx = address - 1; + struct ipw_rx_packet *packet = NULL; + unsigned long flags; + + /* Discard packet if channel index is out of range. */ + if (channel_idx >= NL_NUM_OF_ADDRESSES) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": data packet has bad address %u\n", address); + return; + } + + /* + * ->packet_assembler is safe to touch unlocked, this is the only place + */ + if (protocol == TL_PROTOCOLID_COM_DATA) { + struct ipw_rx_packet **assem = + &hw->packet_assembler[channel_idx]; + + /* + * Create a new packet, or assembler already contains one + * enlarge it by 'length' bytes. + */ + (*assem) = pool_allocate(hw, *assem, length); + if (!(*assem)) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": no memory for incomming data packet, dropped!\n"); + return; + } + (*assem)->protocol = protocol; + (*assem)->channel_idx = channel_idx; + + /* Append this packet data onto existing data. */ + memcpy((unsigned char *)(*assem) + + sizeof(struct ipw_rx_packet) + + (*assem)->length, data, length); + (*assem)->length += length; + if (is_last) { + packet = *assem; + *assem = NULL; + /* Count queued DATA bytes only */ + spin_lock_irqsave(&hw->spinlock, flags); + hw->rx_bytes_queued += packet->length; + spin_unlock_irqrestore(&hw->spinlock, flags); + } + } else { + /* If it's a CTRL packet, don't assemble, just queue it. */ + packet = pool_allocate(hw, NULL, length); + if (!packet) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": no memory for incomming ctrl packet, dropped!\n"); + return; + } + packet->protocol = protocol; + packet->channel_idx = channel_idx; + memcpy((unsigned char *)packet + sizeof(struct ipw_rx_packet), + data, length); + packet->length = length; + } + + /* + * If this is the last packet, then send the assembled packet on to the + * network layer. + */ + if (packet) { + spin_lock_irqsave(&hw->spinlock, flags); + list_add_tail(&packet->queue, &hw->rx_queue); + /* Block reception of incoming packets if queue is full. */ + hw->blocking_rx = + hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE; + + spin_unlock_irqrestore(&hw->spinlock, flags); + schedule_work(&hw->work_rx); + } +} + +/* + * Workqueue callback + */ +static void ipw_receive_data_work(struct work_struct *work_rx) +{ + struct ipw_hardware *hw = + container_of(work_rx, struct ipw_hardware, work_rx); + unsigned long flags; + + spin_lock_irqsave(&hw->spinlock, flags); + while (!list_empty(&hw->rx_queue)) { + struct ipw_rx_packet *packet = + list_first_entry(&hw->rx_queue, + struct ipw_rx_packet, queue); + + if (hw->shutting_down) + break; + list_del(&packet->queue); + + /* + * Note: ipwireless_network_packet_received must be called in a + * process context (i.e. via schedule_work) because the tty + * output code can sleep in the tty_flip_buffer_push call. + */ + if (packet->protocol == TL_PROTOCOLID_COM_DATA) { + if (hw->network != NULL) { + /* If the network hasn't been disconnected. */ + spin_unlock_irqrestore(&hw->spinlock, flags); + /* + * This must run unlocked due to tty processing + * and mutex locking + */ + ipwireless_network_packet_received( + hw->network, + packet->channel_idx, + (unsigned char *)packet + + sizeof(struct ipw_rx_packet), + packet->length); + spin_lock_irqsave(&hw->spinlock, flags); + } + /* Count queued DATA bytes only */ + hw->rx_bytes_queued -= packet->length; + } else { + /* + * This is safe to be called locked, callchain does + * not block + */ + handle_received_CTRL_packet(hw, packet->channel_idx, + (unsigned char *)packet + + sizeof(struct ipw_rx_packet), + packet->length); + } + pool_free(hw, packet); + /* + * Unblock reception of incoming packets if queue is no longer + * full. + */ + hw->blocking_rx = + hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE; + if (hw->shutting_down) + break; + } + spin_unlock_irqrestore(&hw->spinlock, flags); +} + +static void handle_received_CTRL_packet(struct ipw_hardware *hw, + unsigned int channel_idx, + unsigned char *data, int len) +{ + struct ipw_control_packet_body *body = + (struct ipw_control_packet_body *) data; + unsigned int changed_mask; + + if (len != sizeof(struct ipw_control_packet_body)) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": control packet was %d bytes - wrong size!\n", + len); + return; + } + + switch (body->sig_no) { + case COMCTRL_CTS: + changed_mask = IPW_CONTROL_LINE_CTS; + break; + case COMCTRL_DCD: + changed_mask = IPW_CONTROL_LINE_DCD; + break; + case COMCTRL_DSR: + changed_mask = IPW_CONTROL_LINE_DSR; + break; + case COMCTRL_RI: + changed_mask = IPW_CONTROL_LINE_RI; + break; + default: + changed_mask = 0; + } + + if (changed_mask != 0) { + if (body->value) + hw->control_lines[channel_idx] |= changed_mask; + else + hw->control_lines[channel_idx] &= ~changed_mask; + if (hw->network) + ipwireless_network_notify_control_line_change( + hw->network, + channel_idx, + hw->control_lines[channel_idx], + changed_mask); + } +} + +static void handle_received_packet(struct ipw_hardware *hw, + union nl_packet *packet, + unsigned short len) +{ + unsigned int protocol = packet->hdr.protocol; + unsigned int address = packet->hdr.address; + unsigned int header_length; + unsigned char *data; + unsigned int data_len; + int is_last = packet->hdr.packet_rank & NL_LAST_PACKET; + + if (packet->hdr.packet_rank & NL_FIRST_PACKET) + header_length = NL_FIRST_PACKET_HEADER_SIZE; + else + header_length = NL_FOLLOWING_PACKET_HEADER_SIZE; + + data = packet->rawpkt + header_length; + data_len = len - header_length; + switch (protocol) { + case TL_PROTOCOLID_COM_DATA: + case TL_PROTOCOLID_COM_CTRL: + queue_received_packet(hw, protocol, address, data, data_len, + is_last); + break; + case TL_PROTOCOLID_SETUP: + handle_received_SETUP_packet(hw, address, data, data_len, + is_last); + break; + } +} + +static void acknowledge_data_read(struct ipw_hardware *hw) +{ + if (hw->hw_version == HW_VERSION_1) + outw(DCR_RXDONE, hw->base_port + IODCR); + else + writew(MEMRX_PCINTACKK, + &hw->memory_info_regs->memreg_pc_interrupt_ack); +} + +/* + * Retrieve a packet from the IPW hardware. + */ +static void do_receive_packet(struct ipw_hardware *hw) +{ + unsigned len; + unsigned int i; + unsigned char pkt[LL_MTU_MAX]; + + start_timing(); + + if (hw->hw_version == HW_VERSION_1) { + len = inw(hw->base_port + IODRR); + if (len > hw->ll_mtu) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": received a packet of %u bytes - " + "longer than the MTU!\n", len); + outw(DCR_RXDONE | DCR_RXRESET, hw->base_port + IODCR); + return; + } + + for (i = 0; i < len; i += 2) { + __le16 raw_data = inw(hw->base_port + IODRR); + unsigned short data = le16_to_cpu(raw_data); + + pkt[i] = (unsigned char) data; + pkt[i + 1] = (unsigned char) (data >> 8); + } + } else { + len = inw(hw->base_port + IODMADPR); + if (len > hw->ll_mtu) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": received a packet of %u bytes - " + "longer than the MTU!\n", len); + writew(MEMRX_PCINTACKK, + &hw->memory_info_regs->memreg_pc_interrupt_ack); + return; + } + + for (i = 0; i < len; i += 2) { + __le16 raw_data = inw(hw->base_port + IODMADPR); + unsigned short data = le16_to_cpu(raw_data); + + pkt[i] = (unsigned char) data; + pkt[i + 1] = (unsigned char) (data >> 8); + } + + while ((i & 3) != 2) { + inw(hw->base_port + IODMADPR); + i += 2; + } + } + + acknowledge_data_read(hw); + + if (ipwireless_debug) + dump_data_bytes("recv", pkt, len); + + handle_received_packet(hw, (union nl_packet *) pkt, len); + + end_read_timing(len); +} + +static int get_current_packet_priority(struct ipw_hardware *hw) +{ + /* + * If we're initializing, don't send anything of higher priority than + * PRIO_SETUP. The network layer therefore need not care about + * hardware initialization - any of its stuff will simply be queued + * until setup is complete. + */ + return (hw->to_setup || hw->initializing + ? PRIO_SETUP + 1 : + NL_NUM_OF_PRIORITIES); +} + +/* + * return 1 if something has been received from hw + */ +static int get_packets_from_hw(struct ipw_hardware *hw) +{ + int received = 0; + unsigned long flags; + + spin_lock_irqsave(&hw->spinlock, flags); + while (hw->rx_ready && !hw->blocking_rx) { + received = 1; + hw->rx_ready--; + spin_unlock_irqrestore(&hw->spinlock, flags); + + do_receive_packet(hw); + + spin_lock_irqsave(&hw->spinlock, flags); + } + spin_unlock_irqrestore(&hw->spinlock, flags); + + return received; +} + +/* + * Send pending packet up to given priority, prioritize SETUP data until + * hardware is fully setup. + * + * return 1 if more packets can be sent + */ +static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) +{ + int more_to_send = 0; + unsigned long flags; + + spin_lock_irqsave(&hw->spinlock, flags); + if (hw->tx_queued && hw->tx_ready != 0) { + int priority; + struct ipw_tx_packet *packet = NULL; + + hw->tx_ready--; + + /* Pick a packet */ + for (priority = 0; priority < priority_limit; priority++) { + if (!list_empty(&hw->tx_queue[priority])) { + packet = list_first_entry( + &hw->tx_queue[priority], + struct ipw_tx_packet, + queue); + + list_del(&packet->queue); + + break; + } + } + if (!packet) { + hw->tx_queued = 0; + spin_unlock_irqrestore(&hw->spinlock, flags); + return 0; + } + spin_unlock_irqrestore(&hw->spinlock, flags); + + /* Send */ + do_send_packet(hw, packet); + + /* Check if more to send */ + spin_lock_irqsave(&hw->spinlock, flags); + for (priority = 0; priority < priority_limit; priority++) + if (!list_empty(&hw->tx_queue[priority])) { + more_to_send = 1; + break; + } + + if (!more_to_send) + hw->tx_queued = 0; + } + spin_unlock_irqrestore(&hw->spinlock, flags); + + return more_to_send; +} + +/* + * Send and receive all queued packets. + */ +static void ipwireless_do_tasklet(unsigned long hw_) +{ + struct ipw_hardware *hw = (struct ipw_hardware *) hw_; + unsigned long flags; + + spin_lock_irqsave(&hw->spinlock, flags); + if (hw->shutting_down) { + spin_unlock_irqrestore(&hw->spinlock, flags); + return; + } + + if (hw->to_setup == 1) { + /* + * Initial setup data sent to hardware + */ + hw->to_setup = 2; + spin_unlock_irqrestore(&hw->spinlock, flags); + + ipw_setup_hardware(hw); + ipw_send_setup_packet(hw); + + send_pending_packet(hw, PRIO_SETUP + 1); + get_packets_from_hw(hw); + } else { + int priority_limit = get_current_packet_priority(hw); + int again; + + spin_unlock_irqrestore(&hw->spinlock, flags); + + do { + again = send_pending_packet(hw, priority_limit); + again |= get_packets_from_hw(hw); + } while (again); + } +} + +/* + * return true if the card is physically present. + */ +static int is_card_present(struct ipw_hardware *hw) +{ + if (hw->hw_version == HW_VERSION_1) + return inw(hw->base_port + IOIR) != 0xFFFF; + else + return readl(&hw->memory_info_regs->memreg_card_present) == + CARD_PRESENT_VALUE; +} + +static irqreturn_t ipwireless_handle_v1_interrupt(int irq, + struct ipw_hardware *hw) +{ + unsigned short irqn; + + irqn = inw(hw->base_port + IOIR); + + /* Check if card is present */ + if (irqn == 0xFFFF) + return IRQ_NONE; + else if (irqn != 0) { + unsigned short ack = 0; + unsigned long flags; + + /* Transmit complete. */ + if (irqn & IR_TXINTR) { + ack |= IR_TXINTR; + spin_lock_irqsave(&hw->spinlock, flags); + hw->tx_ready++; + spin_unlock_irqrestore(&hw->spinlock, flags); + } + /* Received data */ + if (irqn & IR_RXINTR) { + ack |= IR_RXINTR; + spin_lock_irqsave(&hw->spinlock, flags); + hw->rx_ready++; + spin_unlock_irqrestore(&hw->spinlock, flags); + } + if (ack != 0) { + outw(ack, hw->base_port + IOIR); + tasklet_schedule(&hw->tasklet); + } + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static void acknowledge_pcmcia_interrupt(struct ipw_hardware *hw) +{ + unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status); + + csr &= 0xfffd; + writew(csr, &hw->memregs_CCR->reg_config_and_status); +} + +static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq, + struct ipw_hardware *hw) +{ + int tx = 0; + int rx = 0; + int rx_repeat = 0; + int try_mem_tx_old; + unsigned long flags; + + do { + + unsigned short memtx = readw(hw->memreg_tx); + unsigned short memtx_serial; + unsigned short memrxdone = + readw(&hw->memory_info_regs->memreg_rx_done); + + try_mem_tx_old = 0; + + /* check whether the interrupt was generated by ipwireless card */ + if (!(memtx & MEMTX_TX) && !(memrxdone & MEMRX_RX_DONE)) { + + /* check if the card uses memreg_tx_old register */ + if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { + memtx = readw(&hw->memory_info_regs->memreg_tx_old); + if (memtx & MEMTX_TX) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": Using memreg_tx_old\n"); + hw->memreg_tx = + &hw->memory_info_regs->memreg_tx_old; + } else { + return IRQ_NONE; + } + } else { + return IRQ_NONE; + } + } + + /* + * See if the card is physically present. Note that while it is + * powering up, it appears not to be present. + */ + if (!is_card_present(hw)) { + acknowledge_pcmcia_interrupt(hw); + return IRQ_HANDLED; + } + + memtx_serial = memtx & (unsigned short) 0xff00; + if (memtx & MEMTX_TX) { + writew(memtx_serial, hw->memreg_tx); + + if (hw->serial_number_detected) { + if (memtx_serial != hw->last_memtx_serial) { + hw->last_memtx_serial = memtx_serial; + spin_lock_irqsave(&hw->spinlock, flags); + hw->rx_ready++; + spin_unlock_irqrestore(&hw->spinlock, flags); + rx = 1; + } else + /* Ignore 'Timer Recovery' duplicates. */ + rx_repeat = 1; + } else { + /* + * If a non-zero serial number is seen, then enable + * serial number checking. + */ + if (memtx_serial != 0) { + hw->serial_number_detected = 1; + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": memreg_tx serial num detected\n"); + + spin_lock_irqsave(&hw->spinlock, flags); + hw->rx_ready++; + spin_unlock_irqrestore(&hw->spinlock, flags); + } + rx = 1; + } + } + if (memrxdone & MEMRX_RX_DONE) { + writew(0, &hw->memory_info_regs->memreg_rx_done); + spin_lock_irqsave(&hw->spinlock, flags); + hw->tx_ready++; + spin_unlock_irqrestore(&hw->spinlock, flags); + tx = 1; + } + if (tx) + writew(MEMRX_PCINTACKK, + &hw->memory_info_regs->memreg_pc_interrupt_ack); + + acknowledge_pcmcia_interrupt(hw); + + if (tx || rx) + tasklet_schedule(&hw->tasklet); + else if (!rx_repeat) { + if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { + if (hw->serial_number_detected) + printk(KERN_WARNING IPWIRELESS_PCCARD_NAME + ": spurious interrupt - new_tx mode\n"); + else { + printk(KERN_WARNING IPWIRELESS_PCCARD_NAME + ": no valid memreg_tx value - " + "switching to the old memreg_tx\n"); + hw->memreg_tx = + &hw->memory_info_regs->memreg_tx_old; + try_mem_tx_old = 1; + } + } else + printk(KERN_WARNING IPWIRELESS_PCCARD_NAME + ": spurious interrupt - old_tx mode\n"); + } + + } while (try_mem_tx_old == 1); + + return IRQ_HANDLED; +} + +irqreturn_t ipwireless_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct ipw_hardware *hw = dev_id; + + if (hw->hw_version == HW_VERSION_1) + return ipwireless_handle_v1_interrupt(irq, hw); + else + return ipwireless_handle_v2_v3_interrupt(irq, hw); +} + +static void flush_packets_to_hw(struct ipw_hardware *hw) +{ + int priority_limit; + unsigned long flags; + + spin_lock_irqsave(&hw->spinlock, flags); + priority_limit = get_current_packet_priority(hw); + spin_unlock_irqrestore(&hw->spinlock, flags); + + while (send_pending_packet(hw, priority_limit)); +} + +static void send_packet(struct ipw_hardware *hw, int priority, + struct ipw_tx_packet *packet) +{ + unsigned long flags; + + spin_lock_irqsave(&hw->spinlock, flags); + list_add_tail(&packet->queue, &hw->tx_queue[priority]); + hw->tx_queued = 1; + spin_unlock_irqrestore(&hw->spinlock, flags); + + flush_packets_to_hw(hw); +} + +/* Create data packet, non-atomic allocation */ +static void *alloc_data_packet(int data_size, + unsigned char dest_addr, + unsigned char protocol) +{ + struct ipw_tx_packet *packet = kzalloc( + sizeof(struct ipw_tx_packet) + data_size, + GFP_ATOMIC); + + if (!packet) + return NULL; + + INIT_LIST_HEAD(&packet->queue); + packet->dest_addr = dest_addr; + packet->protocol = protocol; + packet->length = data_size; + + return packet; +} + +static void *alloc_ctrl_packet(int header_size, + unsigned char dest_addr, + unsigned char protocol, + unsigned char sig_no) +{ + /* + * sig_no is located right after ipw_tx_packet struct in every + * CTRL or SETUP packets, we can use ipw_control_packet as a + * common struct + */ + struct ipw_control_packet *packet = kzalloc(header_size, GFP_ATOMIC); + + if (!packet) + return NULL; + + INIT_LIST_HEAD(&packet->header.queue); + packet->header.dest_addr = dest_addr; + packet->header.protocol = protocol; + packet->header.length = header_size - sizeof(struct ipw_tx_packet); + packet->body.sig_no = sig_no; + + return packet; +} + +int ipwireless_send_packet(struct ipw_hardware *hw, unsigned int channel_idx, + unsigned char *data, unsigned int length, + void (*callback) (void *cb, unsigned int length), + void *callback_data) +{ + struct ipw_tx_packet *packet; + + packet = alloc_data_packet(length, + (unsigned char) (channel_idx + 1), + TL_PROTOCOLID_COM_DATA); + if (!packet) + return -ENOMEM; + packet->packet_callback = callback; + packet->callback_data = callback_data; + memcpy((unsigned char *) packet + + sizeof(struct ipw_tx_packet), data, length); + + send_packet(hw, PRIO_DATA, packet); + return 0; +} + +static int set_control_line(struct ipw_hardware *hw, int prio, + unsigned int channel_idx, int line, int state) +{ + struct ipw_control_packet *packet; + int protocolid = TL_PROTOCOLID_COM_CTRL; + + if (prio == PRIO_SETUP) + protocolid = TL_PROTOCOLID_SETUP; + + packet = alloc_ctrl_packet(sizeof(struct ipw_control_packet), + (unsigned char) (channel_idx + 1), + protocolid, line); + if (!packet) + return -ENOMEM; + packet->header.length = sizeof(struct ipw_control_packet_body); + packet->body.value = (unsigned char) (state == 0 ? 0 : 1); + send_packet(hw, prio, &packet->header); + return 0; +} + + +static int set_DTR(struct ipw_hardware *hw, int priority, + unsigned int channel_idx, int state) +{ + if (state != 0) + hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_DTR; + else + hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_DTR; + + return set_control_line(hw, priority, channel_idx, COMCTRL_DTR, state); +} + +static int set_RTS(struct ipw_hardware *hw, int priority, + unsigned int channel_idx, int state) +{ + if (state != 0) + hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_RTS; + else + hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_RTS; + + return set_control_line(hw, priority, channel_idx, COMCTRL_RTS, state); +} + +int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx, + int state) +{ + return set_DTR(hw, PRIO_CTRL, channel_idx, state); +} + +int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx, + int state) +{ + return set_RTS(hw, PRIO_CTRL, channel_idx, state); +} + +struct ipw_setup_get_version_query_packet { + struct ipw_tx_packet header; + struct tl_setup_get_version_qry body; +}; + +struct ipw_setup_config_packet { + struct ipw_tx_packet header; + struct tl_setup_config_msg body; +}; + +struct ipw_setup_config_done_packet { + struct ipw_tx_packet header; + struct tl_setup_config_done_msg body; +}; + +struct ipw_setup_open_packet { + struct ipw_tx_packet header; + struct tl_setup_open_msg body; +}; + +struct ipw_setup_info_packet { + struct ipw_tx_packet header; + struct tl_setup_info_msg body; +}; + +struct ipw_setup_reboot_msg_ack { + struct ipw_tx_packet header; + struct TlSetupRebootMsgAck body; +}; + +/* This handles the actual initialization of the card */ +static void __handle_setup_get_version_rsp(struct ipw_hardware *hw) +{ + struct ipw_setup_config_packet *config_packet; + struct ipw_setup_config_done_packet *config_done_packet; + struct ipw_setup_open_packet *open_packet; + struct ipw_setup_info_packet *info_packet; + int port; + unsigned int channel_idx; + + /* generate config packet */ + for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) { + config_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_config_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_CONFIG_MSG); + if (!config_packet) + goto exit_nomem; + config_packet->header.length = sizeof(struct tl_setup_config_msg); + config_packet->body.port_no = port; + config_packet->body.prio_data = PRIO_DATA; + config_packet->body.prio_ctrl = PRIO_CTRL; + send_packet(hw, PRIO_SETUP, &config_packet->header); + } + config_done_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_config_done_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_CONFIG_DONE_MSG); + if (!config_done_packet) + goto exit_nomem; + config_done_packet->header.length = sizeof(struct tl_setup_config_done_msg); + send_packet(hw, PRIO_SETUP, &config_done_packet->header); + + /* generate open packet */ + for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) { + open_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_open_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_OPEN_MSG); + if (!open_packet) + goto exit_nomem; + open_packet->header.length = sizeof(struct tl_setup_open_msg); + open_packet->body.port_no = port; + send_packet(hw, PRIO_SETUP, &open_packet->header); + } + for (channel_idx = 0; + channel_idx < NL_NUM_OF_ADDRESSES; channel_idx++) { + int ret; + + ret = set_DTR(hw, PRIO_SETUP, channel_idx, + (hw->control_lines[channel_idx] & + IPW_CONTROL_LINE_DTR) != 0); + if (ret) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": error setting DTR (%d)\n", ret); + return; + } + + set_RTS(hw, PRIO_SETUP, channel_idx, + (hw->control_lines [channel_idx] & + IPW_CONTROL_LINE_RTS) != 0); + if (ret) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": error setting RTS (%d)\n", ret); + return; + } + } + /* + * For NDIS we assume that we are using sync PPP frames, for COM async. + * This driver uses NDIS mode too. We don't bother with translation + * from async -> sync PPP. + */ + info_packet = alloc_ctrl_packet(sizeof(struct ipw_setup_info_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_INFO_MSG); + if (!info_packet) + goto exit_nomem; + info_packet->header.length = sizeof(struct tl_setup_info_msg); + info_packet->body.driver_type = NDISWAN_DRIVER; + info_packet->body.major_version = NDISWAN_DRIVER_MAJOR_VERSION; + info_packet->body.minor_version = NDISWAN_DRIVER_MINOR_VERSION; + send_packet(hw, PRIO_SETUP, &info_packet->header); + + /* Initialization is now complete, so we clear the 'to_setup' flag */ + hw->to_setup = 0; + + return; + +exit_nomem: + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": not enough memory to alloc control packet\n"); + hw->to_setup = -1; +} + +static void handle_setup_get_version_rsp(struct ipw_hardware *hw, + unsigned char vers_no) +{ + del_timer(&hw->setup_timer); + hw->initializing = 0; + printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": card is ready.\n"); + + if (vers_no == TL_SETUP_VERSION) + __handle_setup_get_version_rsp(hw); + else + printk(KERN_ERR + IPWIRELESS_PCCARD_NAME + ": invalid hardware version no %u\n", + (unsigned int) vers_no); +} + +static void ipw_send_setup_packet(struct ipw_hardware *hw) +{ + struct ipw_setup_get_version_query_packet *ver_packet; + + ver_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_get_version_query_packet), + ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_GET_VERSION_QRY); + ver_packet->header.length = sizeof(struct tl_setup_get_version_qry); + + /* + * Response is handled in handle_received_SETUP_packet + */ + send_packet(hw, PRIO_SETUP, &ver_packet->header); +} + +static void handle_received_SETUP_packet(struct ipw_hardware *hw, + unsigned int address, + unsigned char *data, int len, + int is_last) +{ + union ipw_setup_rx_msg *rx_msg = (union ipw_setup_rx_msg *) data; + + if (address != ADDR_SETUP_PROT) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": setup packet has bad address %d\n", address); + return; + } + + switch (rx_msg->sig_no) { + case TL_SETUP_SIGNO_GET_VERSION_RSP: + if (hw->to_setup) + handle_setup_get_version_rsp(hw, + rx_msg->version_rsp_msg.version); + break; + + case TL_SETUP_SIGNO_OPEN_MSG: + if (ipwireless_debug) { + unsigned int channel_idx = rx_msg->open_msg.port_no - 1; + + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": OPEN_MSG [channel %u] reply received\n", + channel_idx); + } + break; + + case TL_SETUP_SIGNO_INFO_MSG_ACK: + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": card successfully configured as NDISWAN\n"); + break; + + case TL_SETUP_SIGNO_REBOOT_MSG: + if (hw->to_setup) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": Setup not completed - ignoring reboot msg\n"); + else { + struct ipw_setup_reboot_msg_ack *packet; + + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": Acknowledging REBOOT message\n"); + packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_reboot_msg_ack), + ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_REBOOT_MSG_ACK); + packet->header.length = + sizeof(struct TlSetupRebootMsgAck); + send_packet(hw, PRIO_SETUP, &packet->header); + if (hw->reboot_callback) + hw->reboot_callback(hw->reboot_callback_data); + } + break; + + default: + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": unknown setup message %u received\n", + (unsigned int) rx_msg->sig_no); + } +} + +static void do_close_hardware(struct ipw_hardware *hw) +{ + unsigned int irqn; + + if (hw->hw_version == HW_VERSION_1) { + /* Disable TX and RX interrupts. */ + outw(0, hw->base_port + IOIER); + + /* Acknowledge any outstanding interrupt requests */ + irqn = inw(hw->base_port + IOIR); + if (irqn & IR_TXINTR) + outw(IR_TXINTR, hw->base_port + IOIR); + if (irqn & IR_RXINTR) + outw(IR_RXINTR, hw->base_port + IOIR); + + synchronize_irq(hw->irq); + } +} + +struct ipw_hardware *ipwireless_hardware_create(void) +{ + int i; + struct ipw_hardware *hw = + kzalloc(sizeof(struct ipw_hardware), GFP_KERNEL); + + if (!hw) + return NULL; + + hw->irq = -1; + hw->initializing = 1; + hw->tx_ready = 1; + hw->rx_bytes_queued = 0; + hw->rx_pool_size = 0; + hw->last_memtx_serial = (unsigned short) 0xffff; + for (i = 0; i < NL_NUM_OF_PRIORITIES; i++) + INIT_LIST_HEAD(&hw->tx_queue[i]); + + INIT_LIST_HEAD(&hw->rx_queue); + INIT_LIST_HEAD(&hw->rx_pool); + spin_lock_init(&hw->spinlock); + tasklet_init(&hw->tasklet, ipwireless_do_tasklet, (unsigned long) hw); + INIT_WORK(&hw->work_rx, ipw_receive_data_work); + setup_timer(&hw->setup_timer, ipwireless_setup_timer, + (unsigned long) hw); + + return hw; +} + +void ipwireless_init_hardware_v1(struct ipw_hardware *hw, + unsigned int base_port, + void __iomem *attr_memory, + void __iomem *common_memory, + int is_v2_card, + void (*reboot_callback) (void *data), + void *reboot_callback_data) +{ + if (hw->removed) { + hw->removed = 0; + enable_irq(hw->irq); + } + hw->base_port = base_port; + hw->hw_version = is_v2_card ? HW_VERSION_2 : HW_VERSION_1; + hw->ll_mtu = hw->hw_version == HW_VERSION_1 ? LL_MTU_V1 : LL_MTU_V2; + hw->memregs_CCR = (struct MEMCCR __iomem *) + ((unsigned short __iomem *) attr_memory + 0x200); + hw->memory_info_regs = (struct MEMINFREG __iomem *) common_memory; + hw->memreg_tx = &hw->memory_info_regs->memreg_tx_new; + hw->reboot_callback = reboot_callback; + hw->reboot_callback_data = reboot_callback_data; +} + +void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw) +{ + hw->initializing = 1; + hw->init_loops = 0; + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": waiting for card to start up...\n"); + ipwireless_setup_timer((unsigned long) hw); +} + +static void ipwireless_setup_timer(unsigned long data) +{ + struct ipw_hardware *hw = (struct ipw_hardware *) data; + + hw->init_loops++; + + if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY && + hw->hw_version == HW_VERSION_2 && + hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": failed to startup using TX2, trying TX\n"); + + hw->memreg_tx = &hw->memory_info_regs->memreg_tx_old; + hw->init_loops = 0; + } + /* Give up after a certain number of retries */ + if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": card failed to start up!\n"); + hw->initializing = 0; + } else { + /* Do not attempt to write to the board if it is not present. */ + if (is_card_present(hw)) { + unsigned long flags; + + spin_lock_irqsave(&hw->spinlock, flags); + hw->to_setup = 1; + hw->tx_ready = 1; + spin_unlock_irqrestore(&hw->spinlock, flags); + tasklet_schedule(&hw->tasklet); + } + + mod_timer(&hw->setup_timer, + jiffies + msecs_to_jiffies(TL_SETUP_VERSION_QRY_TMO)); + } +} + +/* + * Stop any interrupts from executing so that, once this function returns, + * other layers of the driver can be sure they won't get any more callbacks. + * Thus must be called on a proper process context. + */ +void ipwireless_stop_interrupts(struct ipw_hardware *hw) +{ + if (!hw->shutting_down) { + /* Tell everyone we are going down. */ + hw->shutting_down = 1; + del_timer(&hw->setup_timer); + + /* Prevent the hardware from sending any more interrupts */ + do_close_hardware(hw); + } +} + +void ipwireless_hardware_free(struct ipw_hardware *hw) +{ + int i; + struct ipw_rx_packet *rp, *rq; + struct ipw_tx_packet *tp, *tq; + + ipwireless_stop_interrupts(hw); + + flush_scheduled_work(); + + for (i = 0; i < NL_NUM_OF_ADDRESSES; i++) + if (hw->packet_assembler[i] != NULL) + kfree(hw->packet_assembler[i]); + + for (i = 0; i < NL_NUM_OF_PRIORITIES; i++) + list_for_each_entry_safe(tp, tq, &hw->tx_queue[i], queue) { + list_del(&tp->queue); + kfree(tp); + } + + list_for_each_entry_safe(rp, rq, &hw->rx_queue, queue) { + list_del(&rp->queue); + kfree(rp); + } + + list_for_each_entry_safe(rp, rq, &hw->rx_pool, queue) { + list_del(&rp->queue); + kfree(rp); + } + kfree(hw); +} + +/* + * Associate the specified network with this hardware, so it will receive events + * from it. + */ +void ipwireless_associate_network(struct ipw_hardware *hw, + struct ipw_network *network) +{ + hw->network = network; +} diff --git a/drivers/char/pcmcia/ipwireless/hardware.h b/drivers/char/pcmcia/ipwireless/hardware.h new file mode 100644 index 00000000000..c83190ffb0e --- /dev/null +++ b/drivers/char/pcmcia/ipwireless/hardware.h @@ -0,0 +1,64 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath <stephen@blacksapphire.com>, + * Ben Martel <benm@symmetric.co.nz> + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_HARDWARE_H_ +#define _IPWIRELESS_CS_HARDWARE_H_ + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#define IPW_CONTROL_LINE_CTS 0x0001 +#define IPW_CONTROL_LINE_DCD 0x0002 +#define IPW_CONTROL_LINE_DSR 0x0004 +#define IPW_CONTROL_LINE_RI 0x0008 +#define IPW_CONTROL_LINE_DTR 0x0010 +#define IPW_CONTROL_LINE_RTS 0x0020 + +struct ipw_hardware; +struct ipw_network; + +struct ipw_hardware *ipwireless_hardware_create(void); +void ipwireless_hardware_free(struct ipw_hardware *hw); +irqreturn_t ipwireless_interrupt(int irq, void *dev_id, struct pt_regs *regs); +int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx, + int state); +int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx, + int state); +int ipwireless_send_packet(struct ipw_hardware *hw, + unsigned int channel_idx, + unsigned char *data, + unsigned int length, + void (*packet_sent_callback) (void *cb, + unsigned int length), + void *sent_cb_data); +void ipwireless_associate_network(struct ipw_hardware *hw, + struct ipw_network *net); +void ipwireless_stop_interrupts(struct ipw_hardware *hw); +void ipwireless_init_hardware_v1(struct ipw_hardware *hw, + unsigned int base_port, + void __iomem *attr_memory, + void __iomem *common_memory, + int is_v2_card, + void (*reboot_cb) (void *data), + void *reboot_cb_data); +void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw); +void ipwireless_sleep(unsigned int tenths); +int ipwireless_dump_hardware_state(char *p, size_t limit, + struct ipw_hardware *hw); + +#endif diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c new file mode 100644 index 00000000000..00c7f8407e3 --- /dev/null +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -0,0 +1,501 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath <stephen@blacksapphire.com>, + * Ben Martel <benm@symmetric.co.nz> + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include "hardware.h" +#include "network.h" +#include "main.h" +#include "tty.h" + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> + +#include <pcmcia/version.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/device_id.h> +#include <pcmcia/ss.h> +#include <pcmcia/ds.h> +#include <pcmcia/cs.h> + +static struct pcmcia_device_id ipw_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100), + PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0200), + PCMCIA_DEVICE_NULL +}; +MODULE_DEVICE_TABLE(pcmcia, ipw_ids); + +static void ipwireless_detach(struct pcmcia_device *link); + +/* + * Module params + */ +/* Debug mode: more verbose, print sent/recv bytes */ +int ipwireless_debug; +int ipwireless_loopback; +int ipwireless_out_queue = 1; + +module_param_named(debug, ipwireless_debug, int, 0); +module_param_named(loopback, ipwireless_loopback, int, 0); +module_param_named(out_queue, ipwireless_out_queue, int, 0); +MODULE_PARM_DESC(debug, "switch on debug messages [0]"); +MODULE_PARM_DESC(loopback, + "debug: enable ras_raw channel [0]"); +MODULE_PARM_DESC(out_queue, "debug: set size of outgoing queue [1]"); + +/* Executes in process context. */ +static void signalled_reboot_work(struct work_struct *work_reboot) +{ + struct ipw_dev *ipw = container_of(work_reboot, struct ipw_dev, + work_reboot); + struct pcmcia_device *link = ipw->link; + int ret = pccard_reset_card(link->socket); + + if (ret != CS_SUCCESS) + cs_error(link, ResetCard, ret); +} + +static void signalled_reboot_callback(void *callback_data) +{ + struct ipw_dev *ipw = (struct ipw_dev *) callback_data; + + /* Delegate to process context. */ + schedule_work(&ipw->work_reboot); +} + +static int config_ipwireless(struct ipw_dev *ipw) +{ + struct pcmcia_device *link = ipw->link; + int ret; + config_info_t conf; + tuple_t tuple; + unsigned short buf[64]; + cisparse_t parse; + unsigned short cor_value; + win_req_t request_attr_memory; + win_req_t request_common_memory; + memreq_t memreq_attr_memory; + memreq_t memreq_common_memory; + + ipw->is_v2_card = 0; + + tuple.Attributes = 0; + tuple.TupleData = (cisdata_t *) buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + + tuple.DesiredTuple = RETURN_FIRST_TUPLE; + + ret = pcmcia_get_first_tuple(link, &tuple); + + while (ret == 0) { + ret = pcmcia_get_tuple_data(link, &tuple); + + if (ret != CS_SUCCESS) { + cs_error(link, GetTupleData, ret); + goto exit0; + } + ret = pcmcia_get_next_tuple(link, &tuple); + } + + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + + ret = pcmcia_get_first_tuple(link, &tuple); + + if (ret != CS_SUCCESS) { + cs_error(link, GetFirstTuple, ret); + goto exit0; + } + + ret = pcmcia_get_tuple_data(link, &tuple); + + if (ret != CS_SUCCESS) { + cs_error(link, GetTupleData, ret); + goto exit0; + } + + ret = pcmcia_parse_tuple(link, &tuple, &parse); + + if (ret != CS_SUCCESS) { + cs_error(link, ParseTuple, ret); + goto exit0; + } + + link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + link->io.BasePort1 = parse.cftable_entry.io.win[0].base; + link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; + link->io.IOAddrLines = 16; + + link->irq.IRQInfo1 = parse.cftable_entry.irq.IRQInfo1; + + /* 0x40 causes it to generate level mode interrupts. */ + /* 0x04 enables IREQ pin. */ + cor_value = parse.cftable_entry.index | 0x44; + link->conf.ConfigIndex = cor_value; + + /* IRQ and I/O settings */ + tuple.DesiredTuple = CISTPL_CONFIG; + + ret = pcmcia_get_first_tuple(link, &tuple); + + if (ret != CS_SUCCESS) { + cs_error(link, GetFirstTuple, ret); + goto exit0; + } + + ret = pcmcia_get_tuple_data(link, &tuple); + + if (ret != CS_SUCCESS) { + cs_error(link, GetTupleData, ret); + goto exit0; + } + + ret = pcmcia_parse_tuple(link, &tuple, &parse); + + if (ret != CS_SUCCESS) { + cs_error(link, GetTupleData, ret); + goto exit0; + } + link->conf.Attributes = CONF_ENABLE_IRQ; + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + link->conf.IntType = INT_MEMORY_AND_IO; + + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; + link->irq.Handler = ipwireless_interrupt; + link->irq.Instance = ipw->hardware; + + ret = pcmcia_request_io(link, &link->io); + + if (ret != CS_SUCCESS) { + cs_error(link, RequestIO, ret); + goto exit0; + } + + /* memory settings */ + + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + + ret = pcmcia_get_first_tuple(link, &tuple); + + if (ret != CS_SUCCESS) { + cs_error(link, GetFirstTuple, ret); + goto exit1; + } + + ret = pcmcia_get_tuple_data(link, &tuple); + + if (ret != CS_SUCCESS) { + cs_error(link, GetTupleData, ret); + goto exit1; + } + + ret = pcmcia_parse_tuple(link, &tuple, &parse); + + if (ret != CS_SUCCESS) { + cs_error(link, ParseTuple, ret); + goto exit1; + } + + if (parse.cftable_entry.mem.nwin > 0) { + request_common_memory.Attributes = + WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE; + request_common_memory.Base = + parse.cftable_entry.mem.win[0].host_addr; + request_common_memory.Size = parse.cftable_entry.mem.win[0].len; + if (request_common_memory.Size < 0x1000) + request_common_memory.Size = 0x1000; + request_common_memory.AccessSpeed = 0; + + ret = pcmcia_request_window(&link, &request_common_memory, + &ipw->handle_common_memory); + + if (ret != CS_SUCCESS) { + cs_error(link, RequestWindow, ret); + goto exit1; + } + + memreq_common_memory.CardOffset = + parse.cftable_entry.mem.win[0].card_addr; + memreq_common_memory.Page = 0; + + ret = pcmcia_map_mem_page(ipw->handle_common_memory, + &memreq_common_memory); + + if (ret != CS_SUCCESS) { + cs_error(link, MapMemPage, ret); + goto exit1; + } + + ipw->is_v2_card = + parse.cftable_entry.mem.win[0].len == 0x100; + + ipw->common_memory = ioremap(request_common_memory.Base, + request_common_memory.Size); + + request_attr_memory.Attributes = + WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | WIN_ENABLE; + request_attr_memory.Base = 0; + request_attr_memory.Size = 0; /* this used to be 0x1000 */ + request_attr_memory.AccessSpeed = 0; + + ret = pcmcia_request_window(&link, &request_attr_memory, + &ipw->handle_attr_memory); + + if (ret != CS_SUCCESS) { + cs_error(link, RequestWindow, ret); + goto exit2; + } + + memreq_attr_memory.CardOffset = 0; + memreq_attr_memory.Page = 0; + + ret = pcmcia_map_mem_page(ipw->handle_attr_memory, + &memreq_attr_memory); + + if (ret != CS_SUCCESS) { + cs_error(link, MapMemPage, ret); + goto exit2; + } + + ipw->attr_memory = ioremap(request_attr_memory.Base, + request_attr_memory.Size); + } + + INIT_WORK(&ipw->work_reboot, signalled_reboot_work); + + ipwireless_init_hardware_v1(ipw->hardware, link->io.BasePort1, + ipw->attr_memory, ipw->common_memory, + ipw->is_v2_card, signalled_reboot_callback, + ipw); + + ret = pcmcia_request_irq(link, &link->irq); + + if (ret != CS_SUCCESS) { + cs_error(link, RequestIRQ, ret); + goto exit3; + } + + /* Look up current Vcc */ + + ret = pcmcia_get_configuration_info(link, &conf); + + if (ret != CS_SUCCESS) { + cs_error(link, GetConfigurationInfo, ret); + goto exit4; + } + + printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n", + ipw->is_v2_card ? "V2/V3" : "V1"); + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": I/O ports 0x%04x-0x%04x, irq %d\n", + (unsigned int) link->io.BasePort1, + (unsigned int) (link->io.BasePort1 + + link->io.NumPorts1 - 1), + (unsigned int) link->irq.AssignedIRQ); + if (ipw->attr_memory && ipw->common_memory) + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": attr memory 0x%08lx-0x%08lx, " + "common memory 0x%08lx-0x%08lx\n", + request_attr_memory.Base, + request_attr_memory.Base + + request_attr_memory.Size - 1, + request_common_memory.Base, + request_common_memory.Base + + request_common_memory.Size - 1); + + ipw->network = ipwireless_network_create(ipw->hardware); + if (!ipw->network) + goto exit3; + + ipw->tty = ipwireless_tty_create(ipw->hardware, ipw->network, + ipw->nodes); + if (!ipw->tty) + goto exit3; + + ipwireless_init_hardware_v2_v3(ipw->hardware); + + /* + * Do the RequestConfiguration last, because it enables interrupts. + * Then we don't get any interrupts before we're ready for them. + */ + ret = pcmcia_request_configuration(link, &link->conf); + + if (ret != CS_SUCCESS) { + cs_error(link, RequestConfiguration, ret); + goto exit4; + } + + link->dev_node = &ipw->nodes[0]; + + return 0; + +exit4: + pcmcia_disable_device(link); +exit3: + if (ipw->attr_memory) { + iounmap(ipw->attr_memory); + pcmcia_release_window(ipw->handle_attr_memory); + pcmcia_disable_device(link); + } +exit2: + if (ipw->common_memory) { + iounmap(ipw->common_memory); + pcmcia_release_window(ipw->handle_common_memory); + } +exit1: + pcmcia_disable_device(link); +exit0: + return -1; +} + +static void release_ipwireless(struct ipw_dev *ipw) +{ + struct pcmcia_device *link = ipw->link; + + pcmcia_disable_device(link); + + if (ipw->common_memory) + iounmap(ipw->common_memory); + if (ipw->attr_memory) + iounmap(ipw->attr_memory); + if (ipw->common_memory) + pcmcia_release_window(ipw->handle_common_memory); + if (ipw->attr_memory) + pcmcia_release_window(ipw->handle_attr_memory); + pcmcia_disable_device(link); +} + +/* + * ipwireless_attach() creates an "instance" of the driver, allocating + * local data structures for one device (one interface). The device + * is registered with Card Services. + * + * The pcmcia_device structure is initialized, but we don't actually + * configure the card at this point -- we wait until we receive a + * card insertion event. + */ +static int ipwireless_attach(struct pcmcia_device *link) +{ + struct ipw_dev *ipw; + int ret; + + ipw = kzalloc(sizeof(struct ipw_dev), GFP_KERNEL); + if (!ipw) + return -ENOMEM; + + ipw->link = link; + link->priv = ipw; + link->irq.Instance = ipw; + + /* Link this device into our device list. */ + link->dev_node = &ipw->nodes[0]; + + ipw->hardware = ipwireless_hardware_create(); + if (!ipw->hardware) { + kfree(ipw); + return -ENOMEM; + } + /* RegisterClient will call config_ipwireless */ + + ret = config_ipwireless(ipw); + + if (ret != 0) { + cs_error(link, RegisterClient, ret); + ipwireless_detach(link); + return ret; + } + + return 0; +} + +/* + * This deletes a driver "instance". The device is de-registered with + * Card Services. If it has been released, all local data structures + * are freed. Otherwise, the structures will be freed when the device + * is released. + */ +static void ipwireless_detach(struct pcmcia_device *link) +{ + struct ipw_dev *ipw = link->priv; + + release_ipwireless(ipw); + + /* Break the link with Card Services */ + if (link) + pcmcia_disable_device(link); + + if (ipw->tty != NULL) + ipwireless_tty_free(ipw->tty); + if (ipw->network != NULL) + ipwireless_network_free(ipw->network); + if (ipw->hardware != NULL) + ipwireless_hardware_free(ipw->hardware); + kfree(ipw); +} + +static struct pcmcia_driver me = { + .owner = THIS_MODULE, + .probe = ipwireless_attach, + .remove = ipwireless_detach, + .drv = { .name = IPWIRELESS_PCCARD_NAME }, + .id_table = ipw_ids +}; + +/* + * Module insertion : initialisation of the module. + * Register the card with cardmgr... + */ +static int __init init_ipwireless(void) +{ + int ret; + + printk(KERN_INFO IPWIRELESS_PCCARD_NAME " " + IPWIRELESS_PCMCIA_VERSION " by " IPWIRELESS_PCMCIA_AUTHOR "\n"); + + ret = ipwireless_tty_init(); + if (ret != 0) + return ret; + + ret = pcmcia_register_driver(&me); + if (ret != 0) + ipwireless_tty_release(); + + return ret; +} + +/* + * Module removal + */ +static void __exit exit_ipwireless(void) +{ + printk(KERN_INFO IPWIRELESS_PCCARD_NAME " " + IPWIRELESS_PCMCIA_VERSION " removed\n"); + + pcmcia_unregister_driver(&me); + ipwireless_tty_release(); +} + +module_init(init_ipwireless); +module_exit(exit_ipwireless); + +MODULE_AUTHOR(IPWIRELESS_PCMCIA_AUTHOR); +MODULE_DESCRIPTION(IPWIRELESS_PCCARD_NAME " " IPWIRELESS_PCMCIA_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/char/pcmcia/ipwireless/main.h new file mode 100644 index 00000000000..1bfdcc8d47d --- /dev/null +++ b/drivers/char/pcmcia/ipwireless/main.h @@ -0,0 +1,70 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath <stephen@blacksapphire.com>, + * Ben Martel <benm@symmetric.co.nz> + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_H_ +#define _IPWIRELESS_CS_H_ + +#include <linux/sched.h> +#include <linux/types.h> + +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/ds.h> + +#include "hardware.h" + +#define IPWIRELESS_PCCARD_NAME "ipwireless" +#define IPWIRELESS_PCMCIA_VERSION "1.1" +#define IPWIRELESS_PCMCIA_AUTHOR \ + "Stephen Blackheath, Ben Martel, Jiri Kosina and David Sterba" + +#define IPWIRELESS_TX_QUEUE_SIZE 262144 +#define IPWIRELESS_RX_QUEUE_SIZE 262144 + +#define IPWIRELESS_STATE_DEBUG + +struct ipw_hardware; +struct ipw_network; +struct ipw_tty; + +struct ipw_dev { + struct pcmcia_device *link; + int is_v2_card; + window_handle_t handle_attr_memory; + void __iomem *attr_memory; + window_handle_t handle_common_memory; + void __iomem *common_memory; + dev_node_t nodes[2]; + /* Reference to attribute memory, containing CIS data */ + void *attribute_memory; + + /* Hardware context */ + struct ipw_hardware *hardware; + /* Network layer context */ + struct ipw_network *network; + /* TTY device context */ + struct ipw_tty *tty; + struct work_struct work_reboot; +}; + +/* Module parametres */ +extern int ipwireless_debug; +extern int ipwireless_loopback; +extern int ipwireless_out_queue; + +#endif diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/char/pcmcia/ipwireless/network.c new file mode 100644 index 00000000000..ff35230058d --- /dev/null +++ b/drivers/char/pcmcia/ipwireless/network.c @@ -0,0 +1,512 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath <stephen@blacksapphire.com>, + * Ben Martel <benm@symmetric.co.nz> + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mutex.h> +#include <linux/netdevice.h> +#include <linux/ppp_channel.h> +#include <linux/ppp_defs.h> +#include <linux/if_ppp.h> +#include <linux/skbuff.h> + +#include "network.h" +#include "hardware.h" +#include "main.h" +#include "tty.h" + +#define MAX_OUTGOING_PACKETS_QUEUED ipwireless_out_queue +#define MAX_ASSOCIATED_TTYS 2 + +#define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP) + +struct ipw_network { + /* Hardware context, used for calls to hardware layer. */ + struct ipw_hardware *hardware; + /* Context for kernel 'generic_ppp' functionality */ + struct ppp_channel *ppp_channel; + /* tty context connected with IPW console */ + struct ipw_tty *associated_ttys[NO_OF_IPW_CHANNELS][MAX_ASSOCIATED_TTYS]; + /* True if ppp needs waking up once we're ready to xmit */ + int ppp_blocked; + /* Number of packets queued up in hardware module. */ + int outgoing_packets_queued; + /* Spinlock to avoid interrupts during shutdown */ + spinlock_t spinlock; + struct mutex close_lock; + + /* PPP ioctl data, not actually used anywere */ + unsigned int flags; + unsigned int rbits; + u32 xaccm[8]; + u32 raccm; + int mru; + + int shutting_down; + unsigned int ras_control_lines; + + struct work_struct work_go_online; + struct work_struct work_go_offline; +}; + + +#ifdef IPWIRELESS_STATE_DEBUG +int ipwireless_dump_network_state(char *p, size_t limit, + struct ipw_network *network) +{ + return snprintf(p, limit, + "debug: ppp_blocked=%d\n" + "debug: outgoing_packets_queued=%d\n" + "debug: network.shutting_down=%d\n", + network->ppp_blocked, + network->outgoing_packets_queued, + network->shutting_down); +} +#endif + +static void notify_packet_sent(void *callback_data, unsigned int packet_length) +{ + struct ipw_network *network = callback_data; + unsigned long flags; + + spin_lock_irqsave(&network->spinlock, flags); + network->outgoing_packets_queued--; + if (network->ppp_channel != NULL) { + if (network->ppp_blocked) { + network->ppp_blocked = 0; + spin_unlock_irqrestore(&network->spinlock, flags); + ppp_output_wakeup(network->ppp_channel); + if (ipwireless_debug) + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": ppp unblocked\n"); + } else + spin_unlock_irqrestore(&network->spinlock, flags); + } else + spin_unlock_irqrestore(&network->spinlock, flags); +} + +/* + * Called by the ppp system when it has a packet to send to the hardware. + */ +static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel, + struct sk_buff *skb) +{ + struct ipw_network *network = ppp_channel->private; + unsigned long flags; + + spin_lock_irqsave(&network->spinlock, flags); + if (network->outgoing_packets_queued < MAX_OUTGOING_PACKETS_QUEUED) { + unsigned char *buf; + static unsigned char header[] = { + PPP_ALLSTATIONS, /* 0xff */ + PPP_UI, /* 0x03 */ + }; + int ret; + + network->outgoing_packets_queued++; + spin_unlock_irqrestore(&network->spinlock, flags); + + /* + * If we have the requested amount of headroom in the skb we + * were handed, then we can add the header efficiently. + */ + if (skb_headroom(skb) >= 2) { + memcpy(skb_push(skb, 2), header, 2); + ret = ipwireless_send_packet(network->hardware, + IPW_CHANNEL_RAS, skb->data, + skb->len, + notify_packet_sent, + network); + if (ret == -1) { + skb_pull(skb, 2); + return 0; + } + } else { + /* Otherwise (rarely) we do it inefficiently. */ + buf = kmalloc(skb->len + 2, GFP_ATOMIC); + if (!buf) + return 0; + memcpy(buf + 2, skb->data, skb->len); + memcpy(buf, header, 2); + ret = ipwireless_send_packet(network->hardware, + IPW_CHANNEL_RAS, buf, + skb->len + 2, + notify_packet_sent, + network); + kfree(buf); + if (ret == -1) + return 0; + } + kfree_skb(skb); + return 1; + } else { + /* + * Otherwise reject the packet, and flag that the ppp system + * needs to be unblocked once we are ready to send. + */ + network->ppp_blocked = 1; + spin_unlock_irqrestore(&network->spinlock, flags); + return 0; + } +} + +/* Handle an ioctl call that has come in via ppp. (copy of ppp_async_ioctl() */ +static int ipwireless_ppp_ioctl(struct ppp_channel *ppp_channel, + unsigned int cmd, unsigned long arg) +{ + struct ipw_network *network = ppp_channel->private; + int err, val; + u32 accm[8]; + int __user *user_arg = (int __user *) arg; + + err = -EFAULT; + switch (cmd) { + case PPPIOCGFLAGS: + val = network->flags | network->rbits; + if (put_user(val, user_arg)) + break; + err = 0; + break; + + case PPPIOCSFLAGS: + if (get_user(val, user_arg)) + break; + network->flags = val & ~SC_RCV_BITS; + network->rbits = val & SC_RCV_BITS; + err = 0; + break; + + case PPPIOCGASYNCMAP: + if (put_user(network->xaccm[0], user_arg)) + break; + err = 0; + break; + + case PPPIOCSASYNCMAP: + if (get_user(network->xaccm[0], user_arg)) + break; + err = 0; + break; + + case PPPIOCGRASYNCMAP: + if (put_user(network->raccm, user_arg)) + break; + err = 0; + break; + + case PPPIOCSRASYNCMAP: + if (get_user(network->raccm, user_arg)) + break; + err = 0; + break; + + case PPPIOCGXASYNCMAP: + if (copy_to_user((void __user *) arg, network->xaccm, + sizeof(network->xaccm))) + break; + err = 0; + break; + + case PPPIOCSXASYNCMAP: + if (copy_from_user(accm, (void __user *) arg, sizeof(accm))) + break; + accm[2] &= ~0x40000000U; /* can't escape 0x5e */ + accm[3] |= 0x60000000U; /* must escape 0x7d, 0x7e */ + memcpy(network->xaccm, accm, sizeof(network->xaccm)); + err = 0; + break; + + case PPPIOCGMRU: + if (put_user(network->mru, user_arg)) + break; + err = 0; + break; + + case PPPIOCSMRU: + if (get_user(val, user_arg)) + break; + if (val < PPP_MRU) + val = PPP_MRU; + network->mru = val; + err = 0; + break; + + default: + err = -ENOTTY; + } + + return err; +} + +static struct ppp_channel_ops ipwireless_ppp_channel_ops = { + .start_xmit = ipwireless_ppp_start_xmit, + .ioctl = ipwireless_ppp_ioctl +}; + +static void do_go_online(struct work_struct *work_go_online) +{ + struct ipw_network *network = + container_of(work_go_online, struct ipw_network, + work_go_online); + unsigned long flags; + + spin_lock_irqsave(&network->spinlock, flags); + if (!network->ppp_channel) { + struct ppp_channel *channel; + + spin_unlock_irqrestore(&network->spinlock, flags); + channel = kzalloc(sizeof(struct ppp_channel), GFP_KERNEL); + if (!channel) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": unable to allocate PPP channel\n"); + return; + } + channel->private = network; + channel->mtu = 16384; /* Wild guess */ + channel->hdrlen = 2; + channel->ops = &ipwireless_ppp_channel_ops; + + network->flags = 0; + network->rbits = 0; + network->mru = PPP_MRU; + memset(network->xaccm, 0, sizeof(network->xaccm)); + network->xaccm[0] = ~0U; + network->xaccm[3] = 0x60000000U; + network->raccm = ~0U; + ppp_register_channel(channel); + spin_lock_irqsave(&network->spinlock, flags); + network->ppp_channel = channel; + } + spin_unlock_irqrestore(&network->spinlock, flags); +} + +static void do_go_offline(struct work_struct *work_go_offline) +{ + struct ipw_network *network = + container_of(work_go_offline, struct ipw_network, + work_go_offline); + unsigned long flags; + + mutex_lock(&network->close_lock); + spin_lock_irqsave(&network->spinlock, flags); + if (network->ppp_channel != NULL) { + struct ppp_channel *channel = network->ppp_channel; + + network->ppp_channel = NULL; + spin_unlock_irqrestore(&network->spinlock, flags); + mutex_unlock(&network->close_lock); + ppp_unregister_channel(channel); + } else { + spin_unlock_irqrestore(&network->spinlock, flags); + mutex_unlock(&network->close_lock); + } +} + +void ipwireless_network_notify_control_line_change(struct ipw_network *network, + unsigned int channel_idx, + unsigned int control_lines, + unsigned int changed_mask) +{ + int i; + + if (channel_idx == IPW_CHANNEL_RAS) + network->ras_control_lines = control_lines; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) { + struct ipw_tty *tty = + network->associated_ttys[channel_idx][i]; + + /* + * If it's associated with a tty (other than the RAS channel + * when we're online), then send the data to that tty. The RAS + * channel's data is handled above - it always goes through + * ppp_generic. + */ + if (tty) + ipwireless_tty_notify_control_line_change(tty, + channel_idx, + control_lines, + changed_mask); + } +} + +/* + * Some versions of firmware stuff packets with 0xff 0x03 (PPP: ALLSTATIONS, UI) + * bytes, which are required on sent packet, but not always present on received + * packets + */ +static struct sk_buff *ipw_packet_received_skb(unsigned char *data, + unsigned int length) +{ + struct sk_buff *skb; + + if (length > 2 && data[0] == PPP_ALLSTATIONS && data[1] == PPP_UI) { + length -= 2; + data += 2; + } + + skb = dev_alloc_skb(length + 4); + skb_reserve(skb, 2); + memcpy(skb_put(skb, length), data, length); + + return skb; +} + +void ipwireless_network_packet_received(struct ipw_network *network, + unsigned int channel_idx, + unsigned char *data, + unsigned int length) +{ + int i; + unsigned long flags; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) { + struct ipw_tty *tty = network->associated_ttys[channel_idx][i]; + + /* + * If it's associated with a tty (other than the RAS channel + * when we're online), then send the data to that tty. The RAS + * channel's data is handled above - it always goes through + * ppp_generic. + */ + if (tty && channel_idx == IPW_CHANNEL_RAS + && (network->ras_control_lines & + IPW_CONTROL_LINE_DCD) != 0 + && ipwireless_tty_is_modem(tty)) { + /* + * If data came in on the RAS channel and this tty is + * the modem tty, and we are online, then we send it to + * the PPP layer. + */ + mutex_lock(&network->close_lock); + spin_lock_irqsave(&network->spinlock, flags); + if (network->ppp_channel != NULL) { + struct sk_buff *skb; + + spin_unlock_irqrestore(&network->spinlock, + flags); + + /* Send the data to the ppp_generic module. */ + skb = ipw_packet_received_skb(data, length); + ppp_input(network->ppp_channel, skb); + } else + spin_unlock_irqrestore(&network->spinlock, + flags); + mutex_unlock(&network->close_lock); + } + /* Otherwise we send it out the tty. */ + else + ipwireless_tty_received(tty, data, length); + } +} + +struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw) +{ + struct ipw_network *network = + kzalloc(sizeof(struct ipw_network), GFP_ATOMIC); + + if (!network) + return NULL; + + spin_lock_init(&network->spinlock); + mutex_init(&network->close_lock); + + network->hardware = hw; + + INIT_WORK(&network->work_go_online, do_go_online); + INIT_WORK(&network->work_go_offline, do_go_offline); + + ipwireless_associate_network(hw, network); + + return network; +} + +void ipwireless_network_free(struct ipw_network *network) +{ + network->shutting_down = 1; + + ipwireless_ppp_close(network); + flush_scheduled_work(); + + ipwireless_stop_interrupts(network->hardware); + ipwireless_associate_network(network->hardware, NULL); + + kfree(network); +} + +void ipwireless_associate_network_tty(struct ipw_network *network, + unsigned int channel_idx, + struct ipw_tty *tty) +{ + int i; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) + if (network->associated_ttys[channel_idx][i] == NULL) { + network->associated_ttys[channel_idx][i] = tty; + break; + } +} + +void ipwireless_disassociate_network_ttys(struct ipw_network *network, + unsigned int channel_idx) +{ + int i; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) + network->associated_ttys[channel_idx][i] = NULL; +} + +void ipwireless_ppp_open(struct ipw_network *network) +{ + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": online\n"); + schedule_work(&network->work_go_online); +} + +void ipwireless_ppp_close(struct ipw_network *network) +{ + /* Disconnect from the wireless network. */ + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": offline\n"); + schedule_work(&network->work_go_offline); +} + +int ipwireless_ppp_channel_index(struct ipw_network *network) +{ + int ret = -1; + unsigned long flags; + + spin_lock_irqsave(&network->spinlock, flags); + if (network->ppp_channel != NULL) + ret = ppp_channel_index(network->ppp_channel); + spin_unlock_irqrestore(&network->spinlock, flags); + + return ret; +} + +int ipwireless_ppp_unit_number(struct ipw_network *network) +{ + int ret = -1; + unsigned long flags; + + spin_lock_irqsave(&network->spinlock, flags); + if (network->ppp_channel != NULL) + ret = ppp_unit_number(network->ppp_channel); + spin_unlock_irqrestore(&network->spinlock, flags); + + return ret; +} diff --git a/drivers/char/pcmcia/ipwireless/network.h b/drivers/char/pcmcia/ipwireless/network.h new file mode 100644 index 00000000000..b0e1e952fd1 --- /dev/null +++ b/drivers/char/pcmcia/ipwireless/network.h @@ -0,0 +1,55 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath <stephen@blacksapphire.com>, + * Ben Martel <benm@symmetric.co.nz> + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_NETWORK_H_ +#define _IPWIRELESS_CS_NETWORK_H_ + +#include <linux/types.h> + +struct ipw_network; +struct ipw_tty; +struct ipw_hardware; + +/* Definitions of the different channels on the PCMCIA UE */ +#define IPW_CHANNEL_RAS 0 +#define IPW_CHANNEL_DIALLER 1 +#define IPW_CHANNEL_CONSOLE 2 +#define NO_OF_IPW_CHANNELS 5 + +void ipwireless_network_notify_control_line_change(struct ipw_network *net, + unsigned int channel_idx, unsigned int control_lines, + unsigned int control_mask); +void ipwireless_network_packet_received(struct ipw_network *net, + unsigned int channel_idx, unsigned char *data, + unsigned int length); +struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw); +void ipwireless_network_free(struct ipw_network *net); +void ipwireless_associate_network_tty(struct ipw_network *net, + unsigned int channel_idx, struct ipw_tty *tty); +void ipwireless_disassociate_network_ttys(struct ipw_network *net, + unsigned int channel_idx); + +void ipwireless_ppp_open(struct ipw_network *net); + +void ipwireless_ppp_close(struct ipw_network *net); +int ipwireless_ppp_channel_index(struct ipw_network *net); +int ipwireless_ppp_unit_number(struct ipw_network *net); + +int ipwireless_dump_network_state(char *p, size_t limit, + struct ipw_network *net); + +#endif diff --git a/drivers/char/pcmcia/ipwireless/setup_protocol.h b/drivers/char/pcmcia/ipwireless/setup_protocol.h new file mode 100644 index 00000000000..9d6bcc77c73 --- /dev/null +++ b/drivers/char/pcmcia/ipwireless/setup_protocol.h @@ -0,0 +1,108 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath <stephen@blacksapphire.com>, + * Ben Martel <benm@symmetric.co.nz> + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_SETUP_PROTOCOL_H_ +#define _IPWIRELESS_CS_SETUP_PROTOCOL_H_ + +/* Version of the setup protocol and transport protocols */ +#define TL_SETUP_VERSION 1 + +#define TL_SETUP_VERSION_QRY_TMO 1000 +#define TL_SETUP_MAX_VERSION_QRY 30 + +/* Message numbers 0-9 are obsoleted and must not be reused! */ +#define TL_SETUP_SIGNO_GET_VERSION_QRY 10 +#define TL_SETUP_SIGNO_GET_VERSION_RSP 11 +#define TL_SETUP_SIGNO_CONFIG_MSG 12 +#define TL_SETUP_SIGNO_CONFIG_DONE_MSG 13 +#define TL_SETUP_SIGNO_OPEN_MSG 14 +#define TL_SETUP_SIGNO_CLOSE_MSG 15 + +#define TL_SETUP_SIGNO_INFO_MSG 20 +#define TL_SETUP_SIGNO_INFO_MSG_ACK 21 + +#define TL_SETUP_SIGNO_REBOOT_MSG 22 +#define TL_SETUP_SIGNO_REBOOT_MSG_ACK 23 + +/* Synchronous start-messages */ +struct tl_setup_get_version_qry { + unsigned char sig_no; /* TL_SETUP_SIGNO_GET_VERSION_QRY */ +} __attribute__ ((__packed__)); + +struct tl_setup_get_version_rsp { + unsigned char sig_no; /* TL_SETUP_SIGNO_GET_VERSION_RSP */ + unsigned char version; /* TL_SETUP_VERSION */ +} __attribute__ ((__packed__)); + +struct tl_setup_config_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_CONFIG_MSG */ + unsigned char port_no; + unsigned char prio_data; + unsigned char prio_ctrl; +} __attribute__ ((__packed__)); + +struct tl_setup_config_done_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_CONFIG_DONE_MSG */ +} __attribute__ ((__packed__)); + +/* Asyncronous messages */ +struct tl_setup_open_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_OPEN_MSG */ + unsigned char port_no; +} __attribute__ ((__packed__)); + +struct tl_setup_close_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_CLOSE_MSG */ + unsigned char port_no; +} __attribute__ ((__packed__)); + +/* Driver type - for use in tl_setup_info_msg.driver_type */ +#define COMM_DRIVER 0 +#define NDISWAN_DRIVER 1 +#define NDISWAN_DRIVER_MAJOR_VERSION 2 +#define NDISWAN_DRIVER_MINOR_VERSION 0 + +/* + * It should not matter when this message comes over as we just store the + * results and send the ACK. + */ +struct tl_setup_info_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_INFO_MSG */ + unsigned char driver_type; + unsigned char major_version; + unsigned char minor_version; +} __attribute__ ((__packed__)); + +struct tl_setup_info_msgAck { + unsigned char sig_no; /* TL_SETUP_SIGNO_INFO_MSG_ACK */ +} __attribute__ ((__packed__)); + +struct TlSetupRebootMsgAck { + unsigned char sig_no; /* TL_SETUP_SIGNO_REBOOT_MSG_ACK */ +} __attribute__ ((__packed__)); + +/* Define a union of all the msgs that the driver can receive from the card.*/ +union ipw_setup_rx_msg { + unsigned char sig_no; + struct tl_setup_get_version_rsp version_rsp_msg; + struct tl_setup_open_msg open_msg; + struct tl_setup_close_msg close_msg; + struct tl_setup_info_msg InfoMsg; + struct tl_setup_info_msgAck info_msg_ack; +} __attribute__ ((__packed__)); + +#endif /* _IPWIRELESS_CS_SETUP_PROTOCOL_H_ */ diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c new file mode 100644 index 00000000000..42f3815c5ce --- /dev/null +++ b/drivers/char/pcmcia/ipwireless/tty.c @@ -0,0 +1,688 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath <stephen@blacksapphire.com>, + * Ben Martel <benm@symmetric.co.nz> + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/ppp_defs.h> +#include <linux/if.h> +#include <linux/if_ppp.h> +#include <linux/sched.h> +#include <linux/serial.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/uaccess.h> +#include <linux/version.h> + +#include "tty.h" +#include "network.h" +#include "hardware.h" +#include "main.h" + +#define IPWIRELESS_PCMCIA_START (0) +#define IPWIRELESS_PCMCIA_MINORS (24) +#define IPWIRELESS_PCMCIA_MINOR_RANGE (8) + +#define TTYTYPE_MODEM (0) +#define TTYTYPE_MONITOR (1) +#define TTYTYPE_RAS_RAW (2) + +struct ipw_tty { + int index; + struct ipw_hardware *hardware; + unsigned int channel_idx; + unsigned int secondary_channel_idx; + int tty_type; + struct ipw_network *network; + struct tty_struct *linux_tty; + int open_count; + unsigned int control_lines; + struct mutex ipw_tty_mutex; + int tx_bytes_queued; + int closing; +}; + +static struct ipw_tty *ttys[IPWIRELESS_PCMCIA_MINORS]; + +static struct tty_driver *ipw_tty_driver; + +static char *tty_type_name(int tty_type) +{ + static char *channel_names[] = { + "modem", + "monitor", + "RAS-raw" + }; + + return channel_names[tty_type]; +} + +static void report_registering(struct ipw_tty *tty) +{ + char *iftype = tty_type_name(tty->tty_type); + + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": registering %s device ttyIPWp%d\n", iftype, tty->index); +} + +static void report_deregistering(struct ipw_tty *tty) +{ + char *iftype = tty_type_name(tty->tty_type); + + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": deregistering %s device ttyIPWp%d\n", iftype, + tty->index); +} + +static struct ipw_tty *get_tty(int minor) +{ + if (minor < ipw_tty_driver->minor_start + || minor >= ipw_tty_driver->minor_start + + IPWIRELESS_PCMCIA_MINORS) + return NULL; + else { + int minor_offset = minor - ipw_tty_driver->minor_start; + + /* + * The 'ras_raw' channel is only available when 'loopback' mode + * is enabled. + * Number of minor starts with 16 (_RANGE * _RAS_RAW). + */ + if (!ipwireless_loopback && + minor_offset >= + IPWIRELESS_PCMCIA_MINOR_RANGE * TTYTYPE_RAS_RAW) + return NULL; + + return ttys[minor_offset]; + } +} + +static int ipw_open(struct tty_struct *linux_tty, struct file *filp) +{ + int minor = linux_tty->index; + struct ipw_tty *tty = get_tty(minor); + + if (!tty) + return -ENODEV; + + mutex_lock(&tty->ipw_tty_mutex); + + if (tty->closing) { + mutex_unlock(&tty->ipw_tty_mutex); + return -ENODEV; + } + if (tty->open_count == 0) + tty->tx_bytes_queued = 0; + + tty->open_count++; + + tty->linux_tty = linux_tty; + linux_tty->driver_data = tty; + linux_tty->low_latency = 1; + + if (tty->tty_type == TTYTYPE_MODEM) + ipwireless_ppp_open(tty->network); + + mutex_unlock(&tty->ipw_tty_mutex); + + return 0; +} + +static void do_ipw_close(struct ipw_tty *tty) +{ + tty->open_count--; + + if (tty->open_count == 0) { + struct tty_struct *linux_tty = tty->linux_tty; + + if (linux_tty != NULL) { + tty->linux_tty = NULL; + linux_tty->driver_data = NULL; + + if (tty->tty_type == TTYTYPE_MODEM) + ipwireless_ppp_close(tty->network); + } + } +} + +static void ipw_hangup(struct tty_struct *linux_tty) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return; + + mutex_lock(&tty->ipw_tty_mutex); + if (tty->open_count == 0) { + mutex_unlock(&tty->ipw_tty_mutex); + return; + } + + do_ipw_close(tty); + + mutex_unlock(&tty->ipw_tty_mutex); +} + +static void ipw_close(struct tty_struct *linux_tty, struct file *filp) +{ + ipw_hangup(linux_tty); +} + +/* Take data received from hardware, and send it out the tty */ +void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data, + unsigned int length) +{ + struct tty_struct *linux_tty; + int work = 0; + + mutex_lock(&tty->ipw_tty_mutex); + linux_tty = tty->linux_tty; + if (linux_tty == NULL) { + mutex_unlock(&tty->ipw_tty_mutex); + return; + } + + if (!tty->open_count) { + mutex_unlock(&tty->ipw_tty_mutex); + return; + } + mutex_unlock(&tty->ipw_tty_mutex); + + work = tty_insert_flip_string(linux_tty, data, length); + + if (work != length) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": %d chars not inserted to flip buffer!\n", + length - work); + + /* + * This may sleep if ->low_latency is set + */ + if (work) + tty_flip_buffer_push(linux_tty); +} + +static void ipw_write_packet_sent_callback(void *callback_data, + unsigned int packet_length) +{ + struct ipw_tty *tty = callback_data; + + /* + * Packet has been sent, so we subtract the number of bytes from our + * tally of outstanding TX bytes. + */ + tty->tx_bytes_queued -= packet_length; +} + +static int ipw_write(struct tty_struct *linux_tty, + const unsigned char *buf, int count) +{ + struct ipw_tty *tty = linux_tty->driver_data; + int room, ret; + + if (!tty) + return -ENODEV; + + mutex_lock(&tty->ipw_tty_mutex); + if (!tty->open_count) { + mutex_unlock(&tty->ipw_tty_mutex); + return -EINVAL; + } + + room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued; + if (room < 0) + room = 0; + /* Don't allow caller to write any more than we have room for */ + if (count > room) + count = room; + + if (count == 0) { + mutex_unlock(&tty->ipw_tty_mutex); + return 0; + } + + ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS, + (unsigned char *) buf, count, + ipw_write_packet_sent_callback, tty); + if (ret == -1) { + mutex_unlock(&tty->ipw_tty_mutex); + return 0; + } + + tty->tx_bytes_queued += count; + mutex_unlock(&tty->ipw_tty_mutex); + + return count; +} + +static int ipw_write_room(struct tty_struct *linux_tty) +{ + struct ipw_tty *tty = linux_tty->driver_data; + int room; + + if (!tty) + return -ENODEV; + + if (!tty->open_count) + return -EINVAL; + + room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued; + if (room < 0) + room = 0; + + return room; +} + +static int ipwireless_get_serial_info(struct ipw_tty *tty, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return (-EFAULT); + + memset(&tmp, 0, sizeof(tmp)); + tmp.type = PORT_UNKNOWN; + tmp.line = tty->index; + tmp.port = 0; + tmp.irq = 0; + tmp.flags = 0; + tmp.baud_base = 115200; + tmp.close_delay = 0; + tmp.closing_wait = 0; + tmp.custom_divisor = 0; + tmp.hub6 = 0; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + + return 0; +} + +static int ipw_chars_in_buffer(struct tty_struct *linux_tty) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return -ENODEV; + + if (!tty->open_count) + return -EINVAL; + + return tty->tx_bytes_queued; +} + +static int get_control_lines(struct ipw_tty *tty) +{ + unsigned int my = tty->control_lines; + unsigned int out = 0; + + if (my & IPW_CONTROL_LINE_RTS) + out |= TIOCM_RTS; + if (my & IPW_CONTROL_LINE_DTR) + out |= TIOCM_DTR; + if (my & IPW_CONTROL_LINE_CTS) + out |= TIOCM_CTS; + if (my & IPW_CONTROL_LINE_DSR) + out |= TIOCM_DSR; + if (my & IPW_CONTROL_LINE_DCD) + out |= TIOCM_CD; + + return out; +} + +static int set_control_lines(struct ipw_tty *tty, unsigned int set, + unsigned int clear) +{ + int ret; + + if (set & TIOCM_RTS) { + ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 1); + if (ret) + return ret; + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_RTS(tty->hardware, + tty->secondary_channel_idx, 1); + if (ret) + return ret; + } + } + if (set & TIOCM_DTR) { + ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 1); + if (ret) + return ret; + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_DTR(tty->hardware, + tty->secondary_channel_idx, 1); + if (ret) + return ret; + } + } + if (clear & TIOCM_RTS) { + ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 0); + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_RTS(tty->hardware, + tty->secondary_channel_idx, 0); + if (ret) + return ret; + } + } + if (clear & TIOCM_DTR) { + ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 0); + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_DTR(tty->hardware, + tty->secondary_channel_idx, 0); + if (ret) + return ret; + } + } + return 0; +} + +static int ipw_tiocmget(struct tty_struct *linux_tty, struct file *file) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return -ENODEV; + + if (!tty->open_count) + return -EINVAL; + + return get_control_lines(tty); +} + +static int +ipw_tiocmset(struct tty_struct *linux_tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return -ENODEV; + + if (!tty->open_count) + return -EINVAL; + + return set_control_lines(tty, set, clear); +} + +static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return -ENODEV; + + if (!tty->open_count) + return -EINVAL; + + switch (cmd) { + case TIOCGSERIAL: + return ipwireless_get_serial_info(tty, (void __user *) arg); + + case TIOCSSERIAL: + return 0; /* Keeps the PCMCIA scripts happy. */ + } + + if (tty->tty_type == TTYTYPE_MODEM) { + switch (cmd) { + case PPPIOCGCHAN: + { + int chan = ipwireless_ppp_channel_index( + tty->network); + + if (chan < 0) + return -ENODEV; + if (put_user(chan, (int __user *) arg)) + return -EFAULT; + } + return 0; + + case PPPIOCGUNIT: + { + int unit = ipwireless_ppp_unit_number( + tty->network); + + if (unit < 0) + return -ENODEV; + if (put_user(unit, (int __user *) arg)) + return -EFAULT; + } + return 0; + + case TCGETS: + case TCGETA: + return n_tty_ioctl(linux_tty, file, cmd, arg); + + case TCFLSH: + return n_tty_ioctl(linux_tty, file, cmd, arg); + + case FIONREAD: + { + int val = 0; + + if (put_user(val, (int __user *) arg)) + return -EFAULT; + } + return 0; + } + } + + return -ENOIOCTLCMD; +} + +static int add_tty(dev_node_t *nodesp, int j, + struct ipw_hardware *hardware, + struct ipw_network *network, int channel_idx, + int secondary_channel_idx, int tty_type) +{ + ttys[j] = kzalloc(sizeof(struct ipw_tty), GFP_KERNEL); + if (!ttys[j]) + return -ENOMEM; + ttys[j]->index = j; + ttys[j]->hardware = hardware; + ttys[j]->channel_idx = channel_idx; + ttys[j]->secondary_channel_idx = secondary_channel_idx; + ttys[j]->network = network; + ttys[j]->tty_type = tty_type; + mutex_init(&ttys[j]->ipw_tty_mutex); + + tty_register_device(ipw_tty_driver, j, NULL); + ipwireless_associate_network_tty(network, channel_idx, ttys[j]); + + if (secondary_channel_idx != -1) + ipwireless_associate_network_tty(network, + secondary_channel_idx, + ttys[j]); + if (nodesp != NULL) { + sprintf(nodesp->dev_name, "ttyIPWp%d", j); + nodesp->major = ipw_tty_driver->major; + nodesp->minor = j + ipw_tty_driver->minor_start; + } + if (get_tty(j + ipw_tty_driver->minor_start) == ttys[j]) + report_registering(ttys[j]); + return 0; +} + +struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hardware, + struct ipw_network *network, + dev_node_t *nodes) +{ + int i, j; + + for (i = 0; i < IPWIRELESS_PCMCIA_MINOR_RANGE; i++) { + int allfree = 1; + + for (j = i; j < IPWIRELESS_PCMCIA_MINORS; + j += IPWIRELESS_PCMCIA_MINOR_RANGE) + if (ttys[j] != NULL) { + allfree = 0; + break; + } + + if (allfree) { + j = i; + + if (add_tty(&nodes[0], j, hardware, network, + IPW_CHANNEL_DIALLER, IPW_CHANNEL_RAS, + TTYTYPE_MODEM)) + return NULL; + + j += IPWIRELESS_PCMCIA_MINOR_RANGE; + if (add_tty(&nodes[1], j, hardware, network, + IPW_CHANNEL_DIALLER, -1, + TTYTYPE_MONITOR)) + return NULL; + + j += IPWIRELESS_PCMCIA_MINOR_RANGE; + if (add_tty(NULL, j, hardware, network, + IPW_CHANNEL_RAS, -1, + TTYTYPE_RAS_RAW)) + return NULL; + + nodes[0].next = &nodes[1]; + nodes[1].next = NULL; + + return ttys[i]; + } + } + return NULL; +} + +/* + * Must be called before ipwireless_network_free(). + */ +void ipwireless_tty_free(struct ipw_tty *tty) +{ + int j; + struct ipw_network *network = ttys[tty->index]->network; + + for (j = tty->index; j < IPWIRELESS_PCMCIA_MINORS; + j += IPWIRELESS_PCMCIA_MINOR_RANGE) { + struct ipw_tty *ttyj = ttys[j]; + + if (ttyj) { + mutex_lock(&ttyj->ipw_tty_mutex); + if (get_tty(j + ipw_tty_driver->minor_start) == ttyj) + report_deregistering(ttyj); + ttyj->closing = 1; + if (ttyj->linux_tty != NULL) { + mutex_unlock(&ttyj->ipw_tty_mutex); + tty_hangup(ttyj->linux_tty); + /* Wait till the tty_hangup has completed */ + flush_scheduled_work(); + mutex_lock(&ttyj->ipw_tty_mutex); + } + while (ttyj->open_count) + do_ipw_close(ttyj); + ipwireless_disassociate_network_ttys(network, + ttyj->channel_idx); + tty_unregister_device(ipw_tty_driver, j); + ttys[j] = NULL; + mutex_unlock(&ttyj->ipw_tty_mutex); + kfree(ttyj); + } + } +} + +static struct tty_operations tty_ops = { + .open = ipw_open, + .close = ipw_close, + .hangup = ipw_hangup, + .write = ipw_write, + .write_room = ipw_write_room, + .ioctl = ipw_ioctl, + .chars_in_buffer = ipw_chars_in_buffer, + .tiocmget = ipw_tiocmget, + .tiocmset = ipw_tiocmset, +}; + +int ipwireless_tty_init(void) +{ + int result; + + ipw_tty_driver = alloc_tty_driver(IPWIRELESS_PCMCIA_MINORS); + if (!ipw_tty_driver) + return -ENOMEM; + + ipw_tty_driver->owner = THIS_MODULE; + ipw_tty_driver->driver_name = IPWIRELESS_PCCARD_NAME; + ipw_tty_driver->name = "ttyIPWp"; + ipw_tty_driver->major = 0; + ipw_tty_driver->minor_start = IPWIRELESS_PCMCIA_START; + ipw_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + ipw_tty_driver->subtype = SERIAL_TYPE_NORMAL; + ipw_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + ipw_tty_driver->init_termios = tty_std_termios; + ipw_tty_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + ipw_tty_driver->init_termios.c_ispeed = 9600; + ipw_tty_driver->init_termios.c_ospeed = 9600; + tty_set_operations(ipw_tty_driver, &tty_ops); + result = tty_register_driver(ipw_tty_driver); + if (result) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": failed to register tty driver\n"); + put_tty_driver(ipw_tty_driver); + return result; + } + + return 0; +} + +void ipwireless_tty_release(void) +{ + int ret; + + ret = tty_unregister_driver(ipw_tty_driver); + put_tty_driver(ipw_tty_driver); + if (ret != 0) + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": tty_unregister_driver failed with code %d\n", ret); +} + +int ipwireless_tty_is_modem(struct ipw_tty *tty) +{ + return tty->tty_type == TTYTYPE_MODEM; +} + +void +ipwireless_tty_notify_control_line_change(struct ipw_tty *tty, + unsigned int channel_idx, + unsigned int control_lines, + unsigned int changed_mask) +{ + unsigned int old_control_lines = tty->control_lines; + + tty->control_lines = (tty->control_lines & ~changed_mask) + | (control_lines & changed_mask); + + /* + * If DCD is de-asserted, we close the tty so pppd can tell that we + * have gone offline. + */ + if ((old_control_lines & IPW_CONTROL_LINE_DCD) + && !(tty->control_lines & IPW_CONTROL_LINE_DCD) + && tty->linux_tty) { + tty_hangup(tty->linux_tty); + } +} + diff --git a/drivers/char/pcmcia/ipwireless/tty.h b/drivers/char/pcmcia/ipwireless/tty.h new file mode 100644 index 00000000000..b0deb9168b6 --- /dev/null +++ b/drivers/char/pcmcia/ipwireless/tty.h @@ -0,0 +1,48 @@ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath <stephen@blacksapphire.com>, + * Ben Martel <benm@symmetric.co.nz> + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_TTY_H_ +#define _IPWIRELESS_CS_TTY_H_ + +#include <linux/types.h> +#include <linux/sched.h> + +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/ds.h> + +struct ipw_tty; +struct ipw_network; +struct ipw_hardware; + +int ipwireless_tty_init(void); +void ipwireless_tty_release(void); + +struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hw, + struct ipw_network *net, + dev_node_t *nodes); +void ipwireless_tty_free(struct ipw_tty *tty); +void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data, + unsigned int length); +int ipwireless_tty_is_modem(struct ipw_tty *tty); +void ipwireless_tty_notify_control_line_change(struct ipw_tty *tty, + unsigned int channel_idx, + unsigned int control_lines, + unsigned int changed_mask); + +#endif diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 8caff0ca80f..279ff5005ce 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -57,6 +57,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/ioctl.h> +#include <linux/synclink.h> #include <asm/system.h> #include <asm/io.h> @@ -87,8 +88,6 @@ #include <asm/uaccess.h> -#include "linux/synclink.h" - static MGSL_PARAMS default_params = { MGSL_MODE_HDLC, /* unsigned long mode */ 0, /* unsigned char loopback; */ diff --git a/drivers/char/random.c b/drivers/char/random.c index c511a831f0c..f43c89f7c44 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1039,6 +1039,7 @@ write_pool(struct entropy_store *r, const char __user *buffer, size_t count) p += bytes; add_entropy_words(r, buf, (bytes + 3) / 4); + cond_resched(); } return 0; diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 102ece4c4e0..8fc4fe4e38f 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -47,6 +47,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/tty_flip.h> +#include <linux/spinlock.h> #include <asm/uaccess.h> @@ -77,10 +78,10 @@ ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \ ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP) -#define RS_EVENT_WRITE_WAKEUP 0 - static struct tty_driver *riscom_driver; +static DEFINE_SPINLOCK(riscom_lock); + static struct riscom_board rc_board[RC_NBOARD] = { { .base = RC_IOBASE1, @@ -217,13 +218,14 @@ static void __init rc_init_CD180(struct riscom_board const * bp) { unsigned long flags; - save_flags(flags); cli(); + spin_lock_irqsave(&riscom_lock, flags); + rc_out(bp, RC_CTOUT, 0); /* Clear timeout */ rc_wait_CCR(bp); /* Wait for CCR ready */ rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */ - sti(); + spin_unlock_irqrestore(&riscom_lock, flags); msleep(50); /* Delay 0.05 sec */ - cli(); + spin_lock_irqsave(&riscom_lock, flags); rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */ rc_out(bp, CD180_GICR, 0); /* Clear all bits */ rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */ @@ -234,7 +236,7 @@ static void __init rc_init_CD180(struct riscom_board const * bp) rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8); rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff); - restore_flags(flags); + spin_unlock_irqrestore(&riscom_lock, flags); } /* Main probing routine, also sets irq. */ @@ -310,12 +312,6 @@ out_release: * */ -static inline void rc_mark_event(struct riscom_port * port, int event) -{ - set_bit(event, &port->event); - schedule_work(&port->tqueue); -} - static inline struct riscom_port * rc_get_port(struct riscom_board const * bp, unsigned char const * what) { @@ -482,7 +478,7 @@ static inline void rc_transmit(struct riscom_board const * bp) rc_out(bp, CD180_IER, port->IER); } if (port->xmit_cnt <= port->wakeup_chars) - rc_mark_event(port, RS_EVENT_WRITE_WAKEUP); + tty_wakeup(tty); } static inline void rc_check_modem(struct riscom_board const * bp) @@ -501,7 +497,7 @@ static inline void rc_check_modem(struct riscom_board const * bp) if (rc_in(bp, CD180_MSVR) & MSVR_CD) wake_up_interruptible(&port->open_wait); else - schedule_work(&port->tqueue_hangup); + tty_hangup(tty); } #ifdef RISCOM_BRAIN_DAMAGED_CTS @@ -510,7 +506,7 @@ static inline void rc_check_modem(struct riscom_board const * bp) tty->hw_stopped = 0; port->IER |= IER_TXRDY; if (port->xmit_cnt <= port->wakeup_chars) - rc_mark_event(port, RS_EVENT_WRITE_WAKEUP); + tty_wakeup(tty); } else { tty->hw_stopped = 1; port->IER &= ~IER_TXRDY; @@ -522,7 +518,7 @@ static inline void rc_check_modem(struct riscom_board const * bp) tty->hw_stopped = 0; port->IER |= IER_TXRDY; if (port->xmit_cnt <= port->wakeup_chars) - rc_mark_event(port, RS_EVENT_WRITE_WAKEUP); + tty_wakeup(tty); } else { tty->hw_stopped = 1; port->IER &= ~IER_TXRDY; @@ -812,9 +808,9 @@ static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port) } port->xmit_buf = (unsigned char *) tmp; } - - save_flags(flags); cli(); - + + spin_lock_irqsave(&riscom_lock, flags); + if (port->tty) clear_bit(TTY_IO_ERROR, &port->tty->flags); @@ -825,7 +821,7 @@ static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port) rc_change_speed(bp, port); port->flags |= ASYNC_INITIALIZED; - restore_flags(flags); + spin_unlock_irqrestore(&riscom_lock, flags); return 0; } @@ -901,6 +897,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, int retval; int do_clocal = 0; int CD; + unsigned long flags; /* * If the device is in the middle of being closed, then block @@ -936,19 +933,26 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, */ retval = 0; add_wait_queue(&port->open_wait, &wait); - cli(); + + spin_lock_irqsave(&riscom_lock, flags); + if (!tty_hung_up_p(filp)) port->count--; - sti(); + + spin_unlock_irqrestore(&riscom_lock, flags); + port->blocked_open++; while (1) { - cli(); + spin_lock_irqsave(&riscom_lock, flags); + rc_out(bp, CD180_CAR, port_No(port)); CD = rc_in(bp, CD180_MSVR) & MSVR_CD; rc_out(bp, CD180_MSVR, MSVR_RTS); bp->DTR &= ~(1u << port_No(port)); rc_out(bp, RC_DTR, bp->DTR); - sti(); + + spin_unlock_irqrestore(&riscom_lock, flags); + set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { @@ -1020,8 +1024,9 @@ static void rc_close(struct tty_struct * tty, struct file * filp) if (!port || rc_paranoia_check(port, tty->name, "close")) return; - - save_flags(flags); cli(); + + spin_lock_irqsave(&riscom_lock, flags); + if (tty_hung_up_p(filp)) goto out; @@ -1078,7 +1083,6 @@ static void rc_close(struct tty_struct * tty, struct file * filp) tty_ldisc_flush(tty); tty->closing = 0; - port->event = 0; port->tty = NULL; if (port->blocked_open) { if (port->close_delay) { @@ -1088,7 +1092,9 @@ static void rc_close(struct tty_struct * tty, struct file * filp) } port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); wake_up_interruptible(&port->close_wait); -out: restore_flags(flags); + +out: + spin_unlock_irqrestore(&riscom_lock, flags); } static int rc_write(struct tty_struct * tty, @@ -1107,34 +1113,33 @@ static int rc_write(struct tty_struct * tty, if (!tty || !port->xmit_buf) return 0; - save_flags(flags); while (1) { - cli(); + spin_lock_irqsave(&riscom_lock, flags); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, SERIAL_XMIT_SIZE - port->xmit_head)); - if (c <= 0) { - restore_flags(flags); - break; - } + if (c <= 0) + break; /* lock continues to be held */ memcpy(port->xmit_buf + port->xmit_head, buf, c); port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); port->xmit_cnt += c; - restore_flags(flags); + + spin_unlock_irqrestore(&riscom_lock, flags); buf += c; count -= c; total += c; } - cli(); if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && !(port->IER & IER_TXRDY)) { port->IER |= IER_TXRDY; rc_out(bp, CD180_CAR, port_No(port)); rc_out(bp, CD180_IER, port->IER); } - restore_flags(flags); + + spin_unlock_irqrestore(&riscom_lock, flags); return total; } @@ -1150,7 +1155,7 @@ static void rc_put_char(struct tty_struct * tty, unsigned char ch) if (!tty || !port->xmit_buf) return; - save_flags(flags); cli(); + spin_lock_irqsave(&riscom_lock, flags); if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) goto out; @@ -1158,7 +1163,9 @@ static void rc_put_char(struct tty_struct * tty, unsigned char ch) port->xmit_buf[port->xmit_head++] = ch; port->xmit_head &= SERIAL_XMIT_SIZE - 1; port->xmit_cnt++; -out: restore_flags(flags); + +out: + spin_unlock_irqrestore(&riscom_lock, flags); } static void rc_flush_chars(struct tty_struct * tty) @@ -1173,11 +1180,13 @@ static void rc_flush_chars(struct tty_struct * tty) !port->xmit_buf) return; - save_flags(flags); cli(); + spin_lock_irqsave(&riscom_lock, flags); + port->IER |= IER_TXRDY; rc_out(port_Board(port), CD180_CAR, port_No(port)); rc_out(port_Board(port), CD180_IER, port->IER); - restore_flags(flags); + + spin_unlock_irqrestore(&riscom_lock, flags); } static int rc_write_room(struct tty_struct * tty) @@ -1212,9 +1221,11 @@ static void rc_flush_buffer(struct tty_struct *tty) if (rc_paranoia_check(port, tty->name, "rc_flush_buffer")) return; - save_flags(flags); cli(); + spin_lock_irqsave(&riscom_lock, flags); + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - restore_flags(flags); + + spin_unlock_irqrestore(&riscom_lock, flags); tty_wakeup(tty); } @@ -1231,11 +1242,15 @@ static int rc_tiocmget(struct tty_struct *tty, struct file *file) return -ENODEV; bp = port_Board(port); - save_flags(flags); cli(); + + spin_lock_irqsave(&riscom_lock, flags); + rc_out(bp, CD180_CAR, port_No(port)); status = rc_in(bp, CD180_MSVR); result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG; - restore_flags(flags); + + spin_unlock_irqrestore(&riscom_lock, flags); + result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0) | ((status & MSVR_DTR) ? TIOCM_DTR : 0) | ((status & MSVR_CD) ? TIOCM_CAR : 0) @@ -1256,7 +1271,8 @@ static int rc_tiocmset(struct tty_struct *tty, struct file *file, bp = port_Board(port); - save_flags(flags); cli(); + spin_lock_irqsave(&riscom_lock, flags); + if (set & TIOCM_RTS) port->MSVR |= MSVR_RTS; if (set & TIOCM_DTR) @@ -1270,7 +1286,9 @@ static int rc_tiocmset(struct tty_struct *tty, struct file *file, rc_out(bp, CD180_CAR, port_No(port)); rc_out(bp, CD180_MSVR, port->MSVR); rc_out(bp, RC_DTR, bp->DTR); - restore_flags(flags); + + spin_unlock_irqrestore(&riscom_lock, flags); + return 0; } @@ -1279,7 +1297,8 @@ static inline void rc_send_break(struct riscom_port * port, unsigned long length struct riscom_board *bp = port_Board(port); unsigned long flags; - save_flags(flags); cli(); + spin_lock_irqsave(&riscom_lock, flags); + port->break_length = RISCOM_TPS / HZ * length; port->COR2 |= COR2_ETC; port->IER |= IER_TXRDY; @@ -1289,7 +1308,8 @@ static inline void rc_send_break(struct riscom_port * port, unsigned long length rc_wait_CCR(bp); rc_out(bp, CD180_CCR, CCR_CORCHG2); rc_wait_CCR(bp); - restore_flags(flags); + + spin_unlock_irqrestore(&riscom_lock, flags); } static inline int rc_set_serial_info(struct riscom_port * port, @@ -1298,7 +1318,6 @@ static inline int rc_set_serial_info(struct riscom_port * port, struct serial_struct tmp; struct riscom_board *bp = port_Board(port); int change_speed; - unsigned long flags; if (copy_from_user(&tmp, newinfo, sizeof(tmp))) return -EFAULT; @@ -1332,9 +1351,11 @@ static inline int rc_set_serial_info(struct riscom_port * port, port->closing_wait = tmp.closing_wait; } if (change_speed) { - save_flags(flags); cli(); + unsigned long flags; + + spin_lock_irqsave(&riscom_lock, flags); rc_change_speed(bp, port); - restore_flags(flags); + spin_unlock_irqrestore(&riscom_lock, flags); } return 0; } @@ -1414,17 +1435,19 @@ static void rc_throttle(struct tty_struct * tty) return; bp = port_Board(port); - - save_flags(flags); cli(); + + spin_lock_irqsave(&riscom_lock, flags); + port->MSVR &= ~MSVR_RTS; rc_out(bp, CD180_CAR, port_No(port)); - if (I_IXOFF(tty)) { + if (I_IXOFF(tty)) { rc_wait_CCR(bp); rc_out(bp, CD180_CCR, CCR_SSCH2); rc_wait_CCR(bp); } rc_out(bp, CD180_MSVR, port->MSVR); - restore_flags(flags); + + spin_unlock_irqrestore(&riscom_lock, flags); } static void rc_unthrottle(struct tty_struct * tty) @@ -1438,7 +1461,8 @@ static void rc_unthrottle(struct tty_struct * tty) bp = port_Board(port); - save_flags(flags); cli(); + spin_lock_irqsave(&riscom_lock, flags); + port->MSVR |= MSVR_RTS; rc_out(bp, CD180_CAR, port_No(port)); if (I_IXOFF(tty)) { @@ -1447,7 +1471,8 @@ static void rc_unthrottle(struct tty_struct * tty) rc_wait_CCR(bp); } rc_out(bp, CD180_MSVR, port->MSVR); - restore_flags(flags); + + spin_unlock_irqrestore(&riscom_lock, flags); } static void rc_stop(struct tty_struct * tty) @@ -1461,11 +1486,13 @@ static void rc_stop(struct tty_struct * tty) bp = port_Board(port); - save_flags(flags); cli(); + spin_lock_irqsave(&riscom_lock, flags); + port->IER &= ~IER_TXRDY; rc_out(bp, CD180_CAR, port_No(port)); rc_out(bp, CD180_IER, port->IER); - restore_flags(flags); + + spin_unlock_irqrestore(&riscom_lock, flags); } static void rc_start(struct tty_struct * tty) @@ -1479,32 +1506,15 @@ static void rc_start(struct tty_struct * tty) bp = port_Board(port); - save_flags(flags); cli(); + spin_lock_irqsave(&riscom_lock, flags); + if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) { port->IER |= IER_TXRDY; rc_out(bp, CD180_CAR, port_No(port)); rc_out(bp, CD180_IER, port->IER); } - restore_flags(flags); -} -/* - * This routine is called from the work queue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (workqueue) -> - * do_rc_hangup() -> tty->hangup() -> rc_hangup() - * - */ -static void do_rc_hangup(struct work_struct *ugly_api) -{ - struct riscom_port *port = container_of(ugly_api, struct riscom_port, tqueue_hangup); - struct tty_struct *tty; - - tty = port->tty; - if (tty) - tty_hangup(tty); /* FIXME: module removal race still here */ + spin_unlock_irqrestore(&riscom_lock, flags); } static void rc_hangup(struct tty_struct * tty) @@ -1518,7 +1528,6 @@ static void rc_hangup(struct tty_struct * tty) bp = port_Board(port); rc_shutdown_port(bp, port); - port->event = 0; port->count = 0; port->flags &= ~ASYNC_NORMAL_ACTIVE; port->tty = NULL; @@ -1537,9 +1546,9 @@ static void rc_set_termios(struct tty_struct * tty, struct ktermios * old_termio tty->termios->c_iflag == old_termios->c_iflag) return; - save_flags(flags); cli(); + spin_lock_irqsave(&riscom_lock, flags); rc_change_speed(port_Board(port), port); - restore_flags(flags); + spin_unlock_irqrestore(&riscom_lock, flags); if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) { @@ -1548,18 +1557,6 @@ static void rc_set_termios(struct tty_struct * tty, struct ktermios * old_termio } } -static void do_softint(struct work_struct *ugly_api) -{ - struct riscom_port *port = container_of(ugly_api, struct riscom_port, tqueue); - struct tty_struct *tty; - - if(!(tty = port->tty)) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event)) - tty_wakeup(tty); -} - static const struct tty_operations riscom_ops = { .open = rc_open, .close = rc_close, @@ -1580,7 +1577,7 @@ static const struct tty_operations riscom_ops = { .tiocmset = rc_tiocmset, }; -static inline int rc_init_drivers(void) +static int __init rc_init_drivers(void) { int error; int i; @@ -1612,8 +1609,6 @@ static inline int rc_init_drivers(void) memset(rc_port, 0, sizeof(rc_port)); for (i = 0; i < RC_NPORT * RC_NBOARD; i++) { rc_port[i].magic = RISCOM8_MAGIC; - INIT_WORK(&rc_port[i].tqueue, do_softint); - INIT_WORK(&rc_port[i].tqueue_hangup, do_rc_hangup); rc_port[i].close_delay = 50 * HZ/100; rc_port[i].closing_wait = 3000 * HZ/100; init_waitqueue_head(&rc_port[i].open_wait); @@ -1627,11 +1622,12 @@ static void rc_release_drivers(void) { unsigned long flags; - save_flags(flags); - cli(); + spin_lock_irqsave(&riscom_lock, flags); + tty_unregister_driver(riscom_driver); put_tty_driver(riscom_driver); - restore_flags(flags); + + spin_unlock_irqrestore(&riscom_lock, flags); } #ifndef MODULE diff --git a/drivers/char/riscom8.h b/drivers/char/riscom8.h index 9cc1313d5e6..cdfdf439447 100644 --- a/drivers/char/riscom8.h +++ b/drivers/char/riscom8.h @@ -71,7 +71,6 @@ struct riscom_port { struct tty_struct * tty; int count; int blocked_open; - unsigned long event; /* long req'd for set_bit --RR */ int timeout; int close_delay; unsigned char * xmit_buf; @@ -81,8 +80,6 @@ struct riscom_port { int xmit_cnt; wait_queue_head_t open_wait; wait_queue_head_t close_wait; - struct work_struct tqueue; - struct work_struct tqueue_hangup; short wakeup_chars; short break_length; unsigned short closing_wait; diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index d83419c3857..72f289279d8 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -40,12 +40,6 @@ */ /****** Defines ******/ -#ifdef PCI_NUM_RESOURCES -#define PCI_BASE_ADDRESS(dev, r) ((dev)->resource[r].start) -#else -#define PCI_BASE_ADDRESS(dev, r) ((dev)->base_address[r]) -#endif - #define ROCKET_PARANOIA_CHECK #define ROCKET_DISABLE_SIMUSAGE @@ -305,8 +299,8 @@ static inline int rocket_paranoia_check(struct r_port *info, if (!info) return 1; if (info->magic != RPORT_MAGIC) { - printk(KERN_INFO "Warning: bad magic number for rocketport struct in %s\n", - routine); + printk(KERN_WARNING "Warning: bad magic number for rocketport " + "struct in %s\n", routine); return 1; } #endif @@ -328,7 +322,7 @@ static void rp_do_receive(struct r_port *info, ToRecv = sGetRxCnt(cp); #ifdef ROCKET_DEBUG_INTR - printk(KERN_INFO "rp_do_receive(%d)...", ToRecv); + printk(KERN_INFO "rp_do_receive(%d)...\n", ToRecv); #endif if (ToRecv == 0) return; @@ -341,7 +335,7 @@ static void rp_do_receive(struct r_port *info, if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) { if (!(ChanStatus & STATMODE)) { #ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "Entering STATMODE..."); + printk(KERN_INFO "Entering STATMODE...\n"); #endif ChanStatus |= STATMODE; sEnRxStatusMode(cp); @@ -355,15 +349,15 @@ static void rp_do_receive(struct r_port *info, */ if (ChanStatus & STATMODE) { #ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "Ignore %x, read %x...", info->ignore_status_mask, - info->read_status_mask); + printk(KERN_INFO "Ignore %x, read %x...\n", + info->ignore_status_mask, info->read_status_mask); #endif while (ToRecv) { char flag; CharNStat = sInW(sGetTxRxDataIO(cp)); #ifdef ROCKET_DEBUG_RECEIVE - printk(KERN_INFO "%x...", CharNStat); + printk(KERN_INFO "%x...\n", CharNStat); #endif if (CharNStat & STMBREAKH) CharNStat &= ~(STMFRAMEH | STMPARITYH); @@ -435,12 +429,13 @@ static void rp_do_transmit(struct r_port *info) unsigned long flags; #ifdef ROCKET_DEBUG_INTR - printk(KERN_INFO "rp_do_transmit "); + printk(KERN_DEBUG "%s\n", __func__); #endif if (!info) return; if (!info->tty) { - printk(KERN_INFO "rp: WARNING rp_do_transmit called with info->tty==NULL\n"); + printk(KERN_WARNING "rp: WARNING %s called with " + "info->tty==NULL\n", __func__); clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); return; } @@ -464,7 +459,7 @@ static void rp_do_transmit(struct r_port *info) info->xmit_cnt -= c; info->xmit_fifo_room -= c; #ifdef ROCKET_DEBUG_INTR - printk(KERN_INFO "tx %d chars...", c); + printk(KERN_INFO "tx %d chars...\n", c); #endif } @@ -481,7 +476,7 @@ static void rp_do_transmit(struct r_port *info) spin_unlock_irqrestore(&info->slock, flags); #ifdef ROCKET_DEBUG_INTR - printk(KERN_INFO "(%d,%d,%d,%d)...", info->xmit_cnt, info->xmit_head, + printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head, info->xmit_tail, info->xmit_fifo_room); #endif } @@ -501,11 +496,13 @@ static void rp_handle_port(struct r_port *info) return; if ((info->flags & ROCKET_INITIALIZED) == 0) { - printk(KERN_INFO "rp: WARNING: rp_handle_port called with info->flags & NOT_INIT\n"); + printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " + "info->flags & NOT_INIT\n"); return; } if (!info->tty) { - printk(KERN_INFO "rp: WARNING: rp_handle_port called with info->tty==NULL\n"); + printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " + "info->tty==NULL\n"); return; } cp = &info->channel; @@ -513,7 +510,7 @@ static void rp_handle_port(struct r_port *info) IntMask = sGetChanIntID(cp) & info->intmask; #ifdef ROCKET_DEBUG_INTR - printk(KERN_INFO "rp_interrupt %02x...", IntMask); + printk(KERN_INFO "rp_interrupt %02x...\n", IntMask); #endif ChanStatus = sGetChanStatus(cp); if (IntMask & RXF_TRIG) { /* Rx FIFO trigger level */ @@ -521,7 +518,7 @@ static void rp_handle_port(struct r_port *info) } if (IntMask & DELTA_CD) { /* CD change */ #if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP)) - printk(KERN_INFO "ttyR%d CD now %s...", info->line, + printk(KERN_INFO "ttyR%d CD now %s...\n", info->line, (ChanStatus & CD_ACT) ? "on" : "off"); #endif if (!(ChanStatus & CD_ACT) && info->cd_status) { @@ -638,7 +635,8 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) /* Get a r_port struct for the port, fill it in and save it globally, indexed by line number */ info = kzalloc(sizeof (struct r_port), GFP_KERNEL); if (!info) { - printk(KERN_INFO "Couldn't allocate info struct for line #%d\n", line); + printk(KERN_ERR "Couldn't allocate info struct for line #%d\n", + line); return; } @@ -668,7 +666,8 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR; if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) { - printk(KERN_INFO "RocketPort sInitChan(%d, %d, %d) failed!\n", board, aiop, chan); + printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n", + board, aiop, chan); kfree(info); return; } @@ -716,11 +715,10 @@ static void configure_r_port(struct r_port *info, unsigned rocketMode; int bits, baud, divisor; CHANNEL_t *cp; + struct ktermios *t = info->tty->termios; - if (!info->tty || !info->tty->termios) - return; cp = &info->channel; - cflag = info->tty->termios->c_cflag; + cflag = t->c_cflag; /* Byte size and parity */ if ((cflag & CSIZE) == CS8) { @@ -755,10 +753,7 @@ static void configure_r_port(struct r_port *info, baud = 9600; divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1; if ((divisor >= 8192 || divisor < 0) && old_termios) { - info->tty->termios->c_cflag &= ~CBAUD; - info->tty->termios->c_cflag |= - (old_termios->c_cflag & CBAUD); - baud = tty_get_baud_rate(info->tty); + baud = tty_termios_baud_rate(old_termios); if (!baud) baud = 9600; divisor = (rp_baud_base[info->board] / baud) - 1; @@ -770,6 +765,9 @@ static void configure_r_port(struct r_port *info, info->cps = baud / bits; sSetBaud(cp, divisor); + /* FIXME: Should really back compute a baud rate from the divisor */ + tty_encode_baud_rate(info->tty, baud, baud); + if (cflag & CRTSCTS) { info->intmask |= DELTA_CTS; sEnCTSFlowCtl(cp); @@ -976,7 +974,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) CHANNEL_t *cp; unsigned long page; - line = TTY_GET_LINE(tty); + line = tty->index; if ((line < 0) || (line >= MAX_RP_PORTS) || ((info = rp_table[line]) == NULL)) return -ENXIO; @@ -1007,7 +1005,8 @@ static int rp_open(struct tty_struct *tty, struct file *filp) atomic_inc(&rp_num_ports_open); #ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rocket mod++ = %d...", atomic_read(&rp_num_ports_open)); + printk(KERN_INFO "rocket mod++ = %d...\n", + atomic_read(&rp_num_ports_open)); #endif } #ifdef ROCKET_DEBUG_OPEN @@ -1103,13 +1102,13 @@ static void rp_close(struct tty_struct *tty, struct file *filp) * one, we've got real problems, since it means the * serial port won't be shutdown. */ - printk(KERN_INFO "rp_close: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->count); + printk(KERN_WARNING "rp_close: bad serial port count; " + "tty->count is 1, info->count is %d\n", info->count); info->count = 1; } if (--info->count < 0) { - printk(KERN_INFO "rp_close: bad serial port count for ttyR%d: %d\n", - info->line, info->count); + printk(KERN_WARNING "rp_close: bad serial port count for " + "ttyR%d: %d\n", info->line, info->count); info->count = 0; } if (info->count) { @@ -1160,8 +1159,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp) if (C_HUPCL(tty)) sClrDTR(cp); - if (TTY_DRIVER_FLUSH_BUFFER_EXISTS(tty)) - TTY_DRIVER_FLUSH_BUFFER(tty); + rp_flush_buffer(tty); tty_ldisc_flush(tty); @@ -1184,7 +1182,8 @@ static void rp_close(struct tty_struct *tty, struct file *filp) atomic_dec(&rp_num_ports_open); #ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "rocket mod-- = %d...", atomic_read(&rp_num_ports_open)); + printk(KERN_INFO "rocket mod-- = %d...\n", + atomic_read(&rp_num_ports_open)); printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line); #endif @@ -1202,15 +1201,14 @@ static void rp_set_termios(struct tty_struct *tty, cflag = tty->termios->c_cflag; - if (cflag == old_termios->c_cflag) - return; - /* * This driver doesn't support CS5 or CS6 */ if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6)) tty->termios->c_cflag = ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE)); + /* Or CMSPAR */ + tty->termios->c_cflag &= ~CMSPAR; configure_r_port(info, old_termios); @@ -1401,6 +1399,9 @@ static int reset_rm2(struct r_port *info, void __user *arg) { int reset; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (copy_from_user(&reset, arg, sizeof (int))) return -EFAULT; if (reset) @@ -1569,9 +1570,9 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) orig_jiffies = jiffies; #ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT - printk(KERN_INFO "In RP_wait_until_sent(%d) (jiff=%lu)...", timeout, + printk(KERN_INFO "In RP_wait_until_sent(%d) (jiff=%lu)...\n", timeout, jiffies); - printk(KERN_INFO "cps=%d...", info->cps); + printk(KERN_INFO "cps=%d...\n", info->cps); #endif while (1) { txcnt = sGetTxCnt(cp); @@ -1592,7 +1593,8 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) if (check_time == 0) check_time = 1; #ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT - printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...", txcnt, jiffies, check_time); + printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...\n", txcnt, + jiffies, check_time); #endif msleep_interruptible(jiffies_to_msecs(check_time)); if (signal_pending(current)) @@ -1616,7 +1618,7 @@ static void rp_hangup(struct tty_struct *tty) return; #if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP)) - printk(KERN_INFO "rp_hangup of ttyR%d...", info->line); + printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line); #endif rp_flush_buffer(tty); if (info->flags & ROCKET_CLOSING) @@ -1664,7 +1666,7 @@ static void rp_put_char(struct tty_struct *tty, unsigned char ch) mutex_lock(&info->write_mtx); #ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_put_char %c...", ch); + printk(KERN_INFO "rp_put_char %c...\n", ch); #endif spin_lock_irqsave(&info->slock, flags); @@ -1709,7 +1711,7 @@ static int rp_write(struct tty_struct *tty, return -ERESTARTSYS; #ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_write %d chars...", count); + printk(KERN_INFO "rp_write %d chars...\n", count); #endif cp = &info->channel; @@ -1798,7 +1800,7 @@ static int rp_write_room(struct tty_struct *tty) if (ret < 0) ret = 0; #ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_write_room returns %d...", ret); + printk(KERN_INFO "rp_write_room returns %d...\n", ret); #endif return ret; } @@ -1818,7 +1820,7 @@ static int rp_chars_in_buffer(struct tty_struct *tty) cp = &info->channel; #ifdef ROCKET_DEBUG_WRITE - printk(KERN_INFO "rp_chars_in_buffer returns %d...", info->xmit_cnt); + printk(KERN_INFO "rp_chars_in_buffer returns %d...\n", info->xmit_cnt); #endif return info->xmit_cnt; } @@ -2161,14 +2163,11 @@ static __init int register_PCI(int i, struct pci_dev *dev) for (aiop = 0; aiop < max_num_aiops; aiop++) ctlp->AiopNumChan[aiop] = ports_per_aiop; - printk("Comtrol PCI controller #%d ID 0x%x found in bus:slot:fn %s at address %04lx, " - "%d AIOP(s) (%s)\n", i, dev->device, pci_name(dev), - rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString); - printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n", - rocketModel[i].modelString, - rocketModel[i].startingPortNumber, - rocketModel[i].startingPortNumber + - rocketModel[i].numPorts - 1); + dev_info(&dev->dev, "comtrol PCI controller #%d found at " + "address %04lx, %d AIOP(s) (%s), creating ttyR%d - %ld\n", + i, rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString, + rocketModel[i].startingPortNumber, + rocketModel[i].startingPortNumber + rocketModel[i].numPorts-1); if (num_aiops <= 0) { rcktpt_io_addr[i] = 0; @@ -2191,10 +2190,10 @@ static __init int register_PCI(int i, struct pci_dev *dev) num_chan = ports_per_aiop; for (chan = 0; chan < num_chan; chan++) sPCIModemReset(ctlp, chan, 1); - mdelay(500); + msleep(500); for (chan = 0; chan < num_chan; chan++) sPCIModemReset(ctlp, chan, 0); - mdelay(500); + msleep(500); rmSpeakerReset(ctlp, rocketModel[i].model); } return (1); @@ -2240,7 +2239,9 @@ static int __init init_ISA(int i) /* Reserve the IO region */ if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) { - printk(KERN_INFO "Unable to reserve IO region for configured ISA RocketPort at address 0x%lx, board not installed...\n", rcktpt_io_addr[i]); + printk(KERN_ERR "Unable to reserve IO region for configured " + "ISA RocketPort at address 0x%lx, board not " + "installed...\n", rcktpt_io_addr[i]); rcktpt_io_addr[i] = 0; return (0); } @@ -2309,10 +2310,10 @@ static int __init init_ISA(int i) total_num_chan = num_chan; for (chan = 0; chan < num_chan; chan++) sModemReset(ctlp, chan, 1); - mdelay(500); + msleep(500); for (chan = 0; chan < num_chan; chan++) sModemReset(ctlp, chan, 0); - mdelay(500); + msleep(500); strcpy(rocketModel[i].modelString, "RocketModem ISA"); } else { strcpy(rocketModel[i].modelString, "RocketPort ISA"); @@ -2480,7 +2481,7 @@ static void rp_cleanup_module(void) retval = tty_unregister_driver(rocket_driver); if (retval) - printk(KERN_INFO "Error %d while trying to unregister " + printk(KERN_ERR "Error %d while trying to unregister " "rocketport driver\n", -retval); for (i = 0; i < MAX_RP_PORTS; i++) diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h index 55b8f2d71a9..f3a75791b81 100644 --- a/drivers/char/rocket_int.h +++ b/drivers/char/rocket_int.h @@ -42,7 +42,7 @@ typedef unsigned int DWordIO_t; static inline void sOutB(unsigned short port, unsigned char value) { #ifdef ROCKET_DEBUG_IO - printk("sOutB(%x, %x)...", port, value); + printk(KERN_DEBUG "sOutB(%x, %x)...\n", port, value); #endif outb_p(value, port); } @@ -50,7 +50,7 @@ static inline void sOutB(unsigned short port, unsigned char value) static inline void sOutW(unsigned short port, unsigned short value) { #ifdef ROCKET_DEBUG_IO - printk("sOutW(%x, %x)...", port, value); + printk(KERN_DEBUG "sOutW(%x, %x)...\n", port, value); #endif outw_p(value, port); } @@ -58,7 +58,7 @@ static inline void sOutW(unsigned short port, unsigned short value) static inline void sOutDW(unsigned short port, unsigned long value) { #ifdef ROCKET_DEBUG_IO - printk("sOutDW(%x, %lx)...", port, value); + printk(KERN_DEBUG "sOutDW(%x, %lx)...\n", port, value); #endif outl_p(cpu_to_le32(value), port); } @@ -105,12 +105,6 @@ static inline unsigned short sInW(unsigned short port) #define AIOPID_NULL -1 /* no AIOP or channel exists */ #define AIOPID_0001 0x0001 /* AIOP release 1 */ -#define NULLDEV -1 /* identifies non-existant device */ -#define NULLCTL -1 /* identifies non-existant controller */ -#define NULLCTLPTR (CONTROLLER_T *)0 /* identifies non-existant controller */ -#define NULLAIOP -1 /* identifies non-existant AIOP */ -#define NULLCHAN -1 /* identifies non-existant channel */ - /************************************************************************ Global Register Offsets - Direct Access - Fixed values ************************************************************************/ @@ -1187,9 +1181,6 @@ struct r_port { #define ROCKET_CLOSING 0x40000000 /* Serial port is closing */ #define ROCKET_NORMAL_ACTIVE 0x20000000 /* Normal port is active */ -/* tty subtypes */ -#define SERIAL_TYPE_NORMAL 1 - /* * Assigned major numbers for the Comtrol Rocketport */ @@ -1240,12 +1231,3 @@ struct r_port { /* Compact PCI device */ #define PCI_DEVICE_ID_CRP16INTF 0x0903 /* Rocketport Compact PCI 16 port w/external I/F */ -#define TTY_GET_LINE(t) t->index -#define TTY_DRIVER_MINOR_START(t) t->driver->minor_start -#define TTY_DRIVER_SUBTYPE(t) t->driver->subtype -#define TTY_DRIVER_NAME(t) t->driver->name -#define TTY_DRIVER_NAME_BASE(t) t->driver->name_base -#define TTY_DRIVER_FLUSH_BUFFER_EXISTS(t) t->driver->flush_buffer -#define TTY_DRIVER_FLUSH_BUFFER(t) t->driver->flush_buffer(t) - - diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c index 3c869145bfd..4ba3aec9e1c 100644 --- a/drivers/char/ser_a2232.c +++ b/drivers/char/ser_a2232.c @@ -653,7 +653,7 @@ static void a2232_init_portstructs(void) port->gs.closing_wait = 30 * HZ; port->gs.rd = &a2232_real_driver; #ifdef NEW_WRITE_LOCKING - init_MUTEX(&(port->gs.port_write_mutex)); + mutex_init(&(port->gs.port_write_mutex)); #endif init_waitqueue_head(&port->gs.open_wait); init_waitqueue_head(&port->gs.close_wait); diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index f1497cecffd..df8cd0ca97e 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -90,8 +90,6 @@ #define STD_COM_FLAGS (0) -#define SERIAL_TYPE_NORMAL 1 - static struct tty_driver *cy_serial_driver; extern int serial_console; static struct cyclades_port *serial_console_info = NULL; @@ -359,18 +357,6 @@ static void cy_start(struct tty_struct *tty) local_irq_restore(flags); } /* cy_start */ -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver - * (also known as the "bottom half"). This can be called any - * number of times for any channel without harm. - */ -static inline void cy_sched_event(struct cyclades_port *info, int event) -{ - info->event |= 1 << event; /* remember what kind of event and who */ - schedule_work(&info->tqueue); -} /* cy_sched_event */ - /* The real interrupt service routines are called whenever the card wants its hand held--chars received, out buffer empty, modem change, etc. @@ -485,10 +471,12 @@ static irqreturn_t cd2401_modem_interrupt(int irq, void *dev_id) && (info->flags & ASYNC_CHECK_CD)) { if (mdm_status & CyDCD) { /* CP('!'); */ - cy_sched_event(info, Cy_EVENT_OPEN_WAKEUP); + wake_up_interruptible(&info->open_wait); } else { /* CP('@'); */ - cy_sched_event(info, Cy_EVENT_HANGUP); + tty_hangup(info->tty); + wake_up_interruptible(&info->open_wait); + info->flags &= ~ASYNC_NORMAL_ACTIVE; } } if ((mdm_change & CyCTS) @@ -498,8 +486,7 @@ static irqreturn_t cd2401_modem_interrupt(int irq, void *dev_id) /* !!! cy_start isn't used because... */ info->tty->stopped = 0; base_addr[CyIER] |= CyTxMpty; - cy_sched_event(info, - Cy_EVENT_WRITE_WAKEUP); + tty_wakeup(info->tty); } } else { if (!(mdm_status & CyCTS)) { @@ -545,9 +532,6 @@ static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id) info->last_active = jiffies; if (info->tty == 0) { base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); - if (info->xmit_cnt < WAKEUP_CHARS) { - cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); - } base_addr[CyTEOIR] = CyNOTRANS; return IRQ_HANDLED; } @@ -629,9 +613,9 @@ static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id) } } - if (info->xmit_cnt < WAKEUP_CHARS) { - cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); - } + if (info->xmit_cnt < WAKEUP_CHARS) + tty_wakeup(info->tty); + base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS; return IRQ_HANDLED; } /* cy_tx_interrupt */ @@ -692,49 +676,6 @@ static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } /* cy_rx_interrupt */ -/* - * This routine is used to handle the "bottom half" processing for the - * serial driver, known also the "software interrupt" processing. - * This processing is done at the kernel interrupt level, after the - * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This - * is where time-consuming activities which can not be done in the - * interrupt driver proper are done; the interrupt driver schedules - * them using cy_sched_event(), and they get done here. - * - * This is done through one level of indirection--the task queue. - * When a hardware interrupt service routine wants service by the - * driver's bottom half, it enqueues the appropriate tq_struct (one - * per port) to the keventd work queue and sets a request flag - * that the work queue be processed. - * - * Although this may seem unwieldy, it gives the system a way to - * pass an argument (in this case the pointer to the cyclades_port - * structure) to the bottom half of the driver. Previous kernels - * had to poll every port to see if that port needed servicing. - */ -static void do_softint(struct work_struct *ugly_api) -{ - struct cyclades_port *info = - container_of(ugly_api, struct cyclades_port, tqueue); - struct tty_struct *tty; - - tty = info->tty; - if (!tty) - return; - - if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) { - tty_hangup(info->tty); - wake_up_interruptible(&info->open_wait); - info->flags &= ~ASYNC_NORMAL_ACTIVE; - } - if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) { - wake_up_interruptible(&info->open_wait); - } - if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) { - tty_wakeup(tty); - } -} /* do_softint */ - /* This is called whenever a port becomes active; interrupts are enabled and DTR & RTS are turned on. */ @@ -1745,7 +1686,6 @@ static void cy_close(struct tty_struct *tty, struct file *filp) if (tty->driver->flush_buffer) tty->driver->flush_buffer(tty); tty_ldisc_flush(tty); - info->event = 0; info->tty = NULL; if (info->blocked_open) { if (info->close_delay) { @@ -2236,7 +2176,6 @@ static int __init serial167_init(void) info->rco = baud_co[DefSpeed] >> 5; /* Rx CO */ info->close_delay = 0; info->x_char = 0; - info->event = 0; info->count = 0; #ifdef SERIAL_DEBUG_COUNT printk("cyc: %d: setting count to 0\n", @@ -2245,7 +2184,6 @@ static int __init serial167_init(void) info->blocked_open = 0; info->default_threshold = 0; info->default_timeout = 0; - INIT_WORK(&info->tqueue, do_softint); init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->close_wait); /* info->session */ diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 455855631ae..c0e08c7bca2 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -178,9 +178,6 @@ static int sx_poll = HZ; ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \ ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP) -#undef RS_EVENT_WRITE_WAKEUP -#define RS_EVENT_WRITE_WAKEUP 0 - static struct tty_driver *specialix_driver; static struct specialix_board sx_board[SX_NBOARD] = { @@ -602,17 +599,6 @@ static int sx_probe(struct specialix_board *bp) * Interrupt processing routines. * */ -static inline void sx_mark_event(struct specialix_port * port, int event) -{ - func_enter(); - - set_bit(event, &port->event); - schedule_work(&port->tqueue); - - func_exit(); -} - - static inline struct specialix_port * sx_get_port(struct specialix_board * bp, unsigned char const * what) { @@ -809,7 +795,7 @@ static inline void sx_transmit(struct specialix_board * bp) sx_out(bp, CD186x_IER, port->IER); } if (port->xmit_cnt <= port->wakeup_chars) - sx_mark_event(port, RS_EVENT_WRITE_WAKEUP); + tty_wakeup(tty); func_exit(); } @@ -839,7 +825,7 @@ static inline void sx_check_modem(struct specialix_board * bp) wake_up_interruptible(&port->open_wait); } else { dprintk (SX_DEBUG_SIGNALS, "Sending HUP.\n"); - schedule_work(&port->tqueue_hangup); + tty_hangup(tty); } } @@ -849,7 +835,7 @@ static inline void sx_check_modem(struct specialix_board * bp) tty->hw_stopped = 0; port->IER |= IER_TXRDY; if (port->xmit_cnt <= port->wakeup_chars) - sx_mark_event(port, RS_EVENT_WRITE_WAKEUP); + tty_wakeup(tty); } else { tty->hw_stopped = 1; port->IER &= ~IER_TXRDY; @@ -861,7 +847,7 @@ static inline void sx_check_modem(struct specialix_board * bp) tty->hw_stopped = 0; port->IER |= IER_TXRDY; if (port->xmit_cnt <= port->wakeup_chars) - sx_mark_event(port, RS_EVENT_WRITE_WAKEUP); + tty_wakeup(tty); } else { tty->hw_stopped = 1; port->IER &= ~IER_TXRDY; @@ -1618,7 +1604,6 @@ static void sx_close(struct tty_struct * tty, struct file * filp) tty_ldisc_flush(tty); spin_lock_irqsave(&port->lock, flags); tty->closing = 0; - port->event = 0; port->tty = NULL; spin_unlock_irqrestore(&port->lock, flags); if (port->blocked_open) { @@ -2235,32 +2220,6 @@ static void sx_start(struct tty_struct * tty) func_exit(); } - -/* - * This routine is called from the work-queue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (workqueue) -> - * do_sx_hangup() -> tty->hangup() -> sx_hangup() - * - */ -static void do_sx_hangup(struct work_struct *work) -{ - struct specialix_port *port = - container_of(work, struct specialix_port, tqueue_hangup); - struct tty_struct *tty; - - func_enter(); - - tty = port->tty; - if (tty) - tty_hangup(tty); /* FIXME: module removal race here */ - - func_exit(); -} - - static void sx_hangup(struct tty_struct * tty) { struct specialix_port *port = (struct specialix_port *)tty->driver_data; @@ -2278,7 +2237,6 @@ static void sx_hangup(struct tty_struct * tty) sx_shutdown_port(bp, port); spin_lock_irqsave(&port->lock, flags); - port->event = 0; bp->count -= port->count; if (bp->count < 0) { printk(KERN_ERR "sx%d: sx_hangup: bad board count: %d port: %d\n", @@ -2320,26 +2278,6 @@ static void sx_set_termios(struct tty_struct * tty, struct ktermios * old_termio } } - -static void do_softint(struct work_struct *work) -{ - struct specialix_port *port = - container_of(work, struct specialix_port, tqueue); - struct tty_struct *tty; - - func_enter(); - - if(!(tty = port->tty)) { - func_exit(); - return; - } - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event)) - tty_wakeup(tty); - - func_exit(); -} - static const struct tty_operations sx_ops = { .open = sx_open, .close = sx_close, @@ -2397,8 +2335,6 @@ static int sx_init_drivers(void) memset(sx_port, 0, sizeof(sx_port)); for (i = 0; i < SX_NPORT * SX_NBOARD; i++) { sx_port[i].magic = SPECIALIX_MAGIC; - INIT_WORK(&sx_port[i].tqueue, do_softint); - INIT_WORK(&sx_port[i].tqueue_hangup, do_sx_hangup); sx_port[i].close_delay = 50 * HZ/100; sx_port[i].closing_wait = 3000 * HZ/100; init_waitqueue_head(&sx_port[i].open_wait); diff --git a/drivers/char/specialix_io8.h b/drivers/char/specialix_io8.h index 895bd90de36..3f2f85bdf51 100644 --- a/drivers/char/specialix_io8.h +++ b/drivers/char/specialix_io8.h @@ -112,7 +112,6 @@ struct specialix_port { struct tty_struct * tty; int count; int blocked_open; - ulong event; int timeout; int close_delay; unsigned char * xmit_buf; @@ -122,8 +121,6 @@ struct specialix_port { int xmit_cnt; wait_queue_head_t open_wait; wait_queue_head_t close_wait; - struct work_struct tqueue; - struct work_struct tqueue_hangup; short wakeup_chars; short break_length; unsigned short closing_wait; diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 45758d5b56e..feac54e32a1 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -145,8 +145,7 @@ static struct stlbrd *stl_brds[STL_MAXBRDS]; */ #define ASYI_TXBUSY 1 #define ASYI_TXLOW 2 -#define ASYI_DCDCHANGE 3 -#define ASYI_TXFLOWED 4 +#define ASYI_TXFLOWED 3 /* * Define an array of board names as printable strings. Handy for @@ -610,6 +609,23 @@ static const struct file_operations stl_fsiomem = { static struct class *stallion_class; +static void stl_cd_change(struct stlport *portp) +{ + unsigned int oldsigs = portp->sigs; + + if (!portp->tty) + return; + + portp->sigs = stl_getsignals(portp); + + if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0)) + wake_up_interruptible(&portp->open_wait); + + if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0)) + if (portp->flags & ASYNC_CHECK_CD) + tty_hangup(portp->tty); +} + /* * Check for any arguments passed in on the module load command line. */ @@ -1771,41 +1787,6 @@ static int stl_echpci64intr(struct stlbrd *brdp) /*****************************************************************************/ /* - * Service an off-level request for some channel. - */ -static void stl_offintr(struct work_struct *work) -{ - struct stlport *portp = container_of(work, struct stlport, tqueue); - struct tty_struct *tty; - unsigned int oldsigs; - - pr_debug("stl_offintr(portp=%p)\n", portp); - - if (portp == NULL) - return; - - tty = portp->tty; - if (tty == NULL) - return; - - if (test_bit(ASYI_TXLOW, &portp->istate)) - tty_wakeup(tty); - - if (test_bit(ASYI_DCDCHANGE, &portp->istate)) { - clear_bit(ASYI_DCDCHANGE, &portp->istate); - oldsigs = portp->sigs; - portp->sigs = stl_getsignals(portp); - if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0)) - wake_up_interruptible(&portp->open_wait); - if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0)) - if (portp->flags & ASYNC_CHECK_CD) - tty_hangup(tty); /* FIXME: module removal race here - AKPM */ - } -} - -/*****************************************************************************/ - -/* * Initialize all the ports on a panel. */ @@ -1840,7 +1821,6 @@ static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp) portp->baud_base = STL_BAUDBASE; portp->close_delay = STL_CLOSEDELAY; portp->closing_wait = 30 * HZ; - INIT_WORK(&portp->tqueue, stl_offintr); init_waitqueue_head(&portp->open_wait); init_waitqueue_head(&portp->close_wait); portp->stats.brd = portp->brdnr; @@ -3530,7 +3510,8 @@ static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr) if ((len == 0) || ((len < STL_TXBUFLOW) && (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { set_bit(ASYI_TXLOW, &portp->istate); - schedule_work(&portp->tqueue); + if (portp->tty) + tty_wakeup(portp->tty); } if (len == 0) { @@ -3546,7 +3527,8 @@ static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr) } else { len = min(len, CD1400_TXFIFOSIZE); portp->stats.txtotal += len; - stlen = min(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail)); + stlen = min_t(unsigned int, len, + (portp->tx.buf + STL_TXBUFSIZE) - tail); outb((TDR + portp->uartaddr), ioaddr); outsb((ioaddr + EREG_DATA), tail, stlen); len -= stlen; @@ -3599,7 +3581,7 @@ static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr) outb((RDCR + portp->uartaddr), ioaddr); len = inb(ioaddr + EREG_DATA); if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { - len = min(len, sizeof(stl_unwanted)); + len = min_t(unsigned int, len, sizeof(stl_unwanted)); outb((RDSR + portp->uartaddr), ioaddr); insb((ioaddr + EREG_DATA), &stl_unwanted[0], len); portp->stats.rxlost += len; @@ -3692,8 +3674,7 @@ static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr) outb((MISR + portp->uartaddr), ioaddr); misr = inb(ioaddr + EREG_DATA); if (misr & MISR_DCD) { - set_bit(ASYI_DCDCHANGE, &portp->istate); - schedule_work(&portp->tqueue); + stl_cd_change(portp); portp->stats.modem++; } @@ -4447,7 +4428,8 @@ static void stl_sc26198txisr(struct stlport *portp) if ((len == 0) || ((len < STL_TXBUFLOW) && (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { set_bit(ASYI_TXLOW, &portp->istate); - schedule_work(&portp->tqueue); + if (portp->tty) + tty_wakeup(portp->tty); } if (len == 0) { @@ -4465,7 +4447,8 @@ static void stl_sc26198txisr(struct stlport *portp) } else { len = min(len, SC26198_TXFIFOSIZE); portp->stats.txtotal += len; - stlen = min(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail)); + stlen = min_t(unsigned int, len, + (portp->tx.buf + STL_TXBUFSIZE) - tail); outb(GTXFIFO, (ioaddr + XP_ADDR)); outsb((ioaddr + XP_DATA), tail, stlen); len -= stlen; @@ -4506,7 +4489,7 @@ static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack) if ((iack & IVR_TYPEMASK) == IVR_RXDATA) { if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { - len = min(len, sizeof(stl_unwanted)); + len = min_t(unsigned int, len, sizeof(stl_unwanted)); outb(GRXFIFO, (ioaddr + XP_ADDR)); insb((ioaddr + XP_DATA), &stl_unwanted[0], len); portp->stats.rxlost += len; @@ -4647,8 +4630,7 @@ static void stl_sc26198otherisr(struct stlport *portp, unsigned int iack) case CIR_SUBCOS: ipr = stl_sc26198getreg(portp, IPR); if (ipr & IPR_DCDCHANGE) { - set_bit(ASYI_DCDCHANGE, &portp->istate); - schedule_work(&portp->tqueue); + stl_cd_change(portp); portp->stats.modem++; } break; diff --git a/drivers/char/sx.h b/drivers/char/sx.h index 70d9783c732..87c2defdead 100644 --- a/drivers/char/sx.h +++ b/drivers/char/sx.h @@ -88,8 +88,6 @@ struct vpd_prom { #define IS_CF_BOARD(board) (board->flags & (SX_CFISA_BOARD | SX_CFPCI_BOARD)) -#define SERIAL_TYPE_NORMAL 1 - /* The SI processor clock is required to calculate the cc_int_count register value for the SI cards. */ #define SI_PROCESSOR_CLOCK 25000000 diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index d010ed95ed3..ddc74d1f4f1 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -85,6 +85,7 @@ #include <linux/vmalloc.h> #include <linux/init.h> #include <linux/ioctl.h> +#include <linux/synclink.h> #include <asm/system.h> #include <asm/io.h> @@ -110,8 +111,6 @@ #include <asm/uaccess.h> -#include "linux/synclink.h" - #define RCLRVALUE 0xffff static MGSL_PARAMS default_params = { diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 64e835f6243..1f954acf2ba 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -73,6 +73,7 @@ #include <linux/bitops.h> #include <linux/workqueue.h> #include <linux/hdlc.h> +#include <linux/synclink.h> #include <asm/system.h> #include <asm/io.h> @@ -81,8 +82,6 @@ #include <asm/types.h> #include <asm/uaccess.h> -#include "linux/synclink.h" - #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE)) #define SYNCLINK_GENERIC_HDLC 1 #else @@ -2040,37 +2039,41 @@ static void bh_transmit(struct slgt_info *info) tty_wakeup(tty); } -static void dsr_change(struct slgt_info *info) +static void dsr_change(struct slgt_info *info, unsigned short status) { - get_signals(info); + if (status & BIT3) { + info->signals |= SerialSignal_DSR; + info->input_signal_events.dsr_up++; + } else { + info->signals &= ~SerialSignal_DSR; + info->input_signal_events.dsr_down++; + } DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals)); if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { slgt_irq_off(info, IRQ_DSR); return; } info->icount.dsr++; - if (info->signals & SerialSignal_DSR) - info->input_signal_events.dsr_up++; - else - info->input_signal_events.dsr_down++; wake_up_interruptible(&info->status_event_wait_q); wake_up_interruptible(&info->event_wait_q); info->pending_bh |= BH_STATUS; } -static void cts_change(struct slgt_info *info) +static void cts_change(struct slgt_info *info, unsigned short status) { - get_signals(info); + if (status & BIT2) { + info->signals |= SerialSignal_CTS; + info->input_signal_events.cts_up++; + } else { + info->signals &= ~SerialSignal_CTS; + info->input_signal_events.cts_down++; + } DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals)); if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { slgt_irq_off(info, IRQ_CTS); return; } info->icount.cts++; - if (info->signals & SerialSignal_CTS) - info->input_signal_events.cts_up++; - else - info->input_signal_events.cts_down++; wake_up_interruptible(&info->status_event_wait_q); wake_up_interruptible(&info->event_wait_q); info->pending_bh |= BH_STATUS; @@ -2091,20 +2094,21 @@ static void cts_change(struct slgt_info *info) } } -static void dcd_change(struct slgt_info *info) +static void dcd_change(struct slgt_info *info, unsigned short status) { - get_signals(info); + if (status & BIT1) { + info->signals |= SerialSignal_DCD; + info->input_signal_events.dcd_up++; + } else { + info->signals &= ~SerialSignal_DCD; + info->input_signal_events.dcd_down++; + } DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals)); if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { slgt_irq_off(info, IRQ_DCD); return; } info->icount.dcd++; - if (info->signals & SerialSignal_DCD) { - info->input_signal_events.dcd_up++; - } else { - info->input_signal_events.dcd_down++; - } #if SYNCLINK_GENERIC_HDLC if (info->netcount) { if (info->signals & SerialSignal_DCD) @@ -2127,20 +2131,21 @@ static void dcd_change(struct slgt_info *info) } } -static void ri_change(struct slgt_info *info) +static void ri_change(struct slgt_info *info, unsigned short status) { - get_signals(info); + if (status & BIT0) { + info->signals |= SerialSignal_RI; + info->input_signal_events.ri_up++; + } else { + info->signals &= ~SerialSignal_RI; + info->input_signal_events.ri_down++; + } DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals)); if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { slgt_irq_off(info, IRQ_RI); return; } - info->icount.dcd++; - if (info->signals & SerialSignal_RI) { - info->input_signal_events.ri_up++; - } else { - info->input_signal_events.ri_down++; - } + info->icount.rng++; wake_up_interruptible(&info->status_event_wait_q); wake_up_interruptible(&info->event_wait_q); info->pending_bh |= BH_STATUS; @@ -2191,13 +2196,13 @@ static void isr_serial(struct slgt_info *info) } if (status & IRQ_DSR) - dsr_change(info); + dsr_change(info, status); if (status & IRQ_CTS) - cts_change(info); + cts_change(info, status); if (status & IRQ_DCD) - dcd_change(info); + dcd_change(info, status); if (status & IRQ_RI) - ri_change(info); + ri_change(info, status); } static void isr_rdma(struct slgt_info *info) diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index c63013b2fc3..f3e7807f78d 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -66,6 +66,7 @@ #include <linux/termios.h> #include <linux/workqueue.h> #include <linux/hdlc.h> +#include <linux/synclink.h> #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE)) #define SYNCLINK_GENERIC_HDLC 1 @@ -80,8 +81,6 @@ #include <asm/uaccess.h> -#include "linux/synclink.h" - static MGSL_PARAMS default_params = { MGSL_MODE_HDLC, /* unsigned long mode */ 0, /* unsigned char loopback; */ diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index c88424a0c89..a5d8bcb4000 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -1031,18 +1031,13 @@ void tpm_remove_hardware(struct device *dev) spin_unlock(&driver_lock); - dev_set_drvdata(dev, NULL); misc_deregister(&chip->vendor.miscdev); - kfree(chip->vendor.miscdev.name); sysfs_remove_group(&dev->kobj, chip->vendor.attr_group); tpm_bios_log_teardown(chip->bios_dir); - clear_bit(chip->dev_num, dev_mask); - - kfree(chip); - - put_device(dev); + /* write it this way to be explicit (chip->dev == dev) */ + put_device(chip->dev); } EXPORT_SYMBOL_GPL(tpm_remove_hardware); @@ -1083,6 +1078,26 @@ int tpm_pm_resume(struct device *dev) EXPORT_SYMBOL_GPL(tpm_pm_resume); /* + * Once all references to platform device are down to 0, + * release all allocated structures. + * In case vendor provided release function, + * call it too. + */ +static void tpm_dev_release(struct device *dev) +{ + struct tpm_chip *chip = dev_get_drvdata(dev); + + if (chip->vendor.release) + chip->vendor.release(dev); + + chip->release(dev); + + clear_bit(chip->dev_num, dev_mask); + kfree(chip->vendor.miscdev.name); + kfree(chip); +} + +/* * Called from tpm_<specific>.c probe function only for devices * the driver has determined it should claim. Prior to calling * this function the specific probe function has called pci_enable_device @@ -1136,23 +1151,21 @@ struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vend chip->vendor.miscdev.parent = dev; chip->dev = get_device(dev); + chip->release = dev->release; + dev->release = tpm_dev_release; + dev_set_drvdata(dev, chip); if (misc_register(&chip->vendor.miscdev)) { dev_err(chip->dev, "unable to misc_register %s, minor %d\n", chip->vendor.miscdev.name, chip->vendor.miscdev.minor); - put_device(dev); - clear_bit(chip->dev_num, dev_mask); - kfree(chip); - kfree(devname); + put_device(chip->dev); return NULL; } spin_lock(&driver_lock); - dev_set_drvdata(dev, chip); - list_add(&chip->list, &tpm_chip_list); spin_unlock(&driver_lock); @@ -1160,10 +1173,7 @@ struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vend if (sysfs_create_group(&dev->kobj, chip->vendor.attr_group)) { list_del(&chip->list); misc_deregister(&chip->vendor.miscdev); - put_device(dev); - clear_bit(chip->dev_num, dev_mask); - kfree(chip); - kfree(devname); + put_device(chip->dev); return NULL; } diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index d15ccddc92e..e885148b4cf 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -74,6 +74,7 @@ struct tpm_vendor_specific { int (*send) (struct tpm_chip *, u8 *, size_t); void (*cancel) (struct tpm_chip *); u8 (*status) (struct tpm_chip *); + void (*release) (struct device *); struct miscdevice miscdev; struct attribute_group *attr_group; struct list_head list; @@ -106,6 +107,7 @@ struct tpm_chip { struct dentry **bios_dir; struct list_head list; + void (*release) (struct device *); }; #define to_tpm_chip(n) container_of(n, struct tpm_chip, vendor) diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index 967002a5a1e..726ee8a0277 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -611,7 +611,7 @@ static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev) } } -static struct pnp_driver tpm_inf_pnp = { +static struct pnp_driver tpm_inf_pnp_driver = { .name = "tpm_inf_pnp", .driver = { .owner = THIS_MODULE, @@ -625,12 +625,12 @@ static struct pnp_driver tpm_inf_pnp = { static int __init init_inf(void) { - return pnp_register_driver(&tpm_inf_pnp); + return pnp_register_driver(&tpm_inf_pnp_driver); } static void __exit cleanup_inf(void) { - pnp_unregister_driver(&tpm_inf_pnp); + pnp_unregister_driver(&tpm_inf_pnp_driver); } module_init(init_inf); diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c index bacded0eefa..7722466e052 100644 --- a/drivers/char/tty_audit.c +++ b/drivers/char/tty_audit.c @@ -27,7 +27,7 @@ static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor, { struct tty_audit_buf *buf; - buf = kmalloc(sizeof (*buf), GFP_KERNEL); + buf = kmalloc(sizeof(*buf), GFP_KERNEL); if (!buf) goto err; if (PAGE_SIZE != N_TTY_BUF_SIZE) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index f36fecd3fd2..613ec816ce6 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -19,7 +19,7 @@ * Also restructured routines so that there is more of a separation * between the high-level tty routines (tty_io.c and tty_ioctl.c) and * the low-level tty routines (serial.c, pty.c, console.c). This - * makes for cleaner and more compact code. -TYT, 9/17/92 + * makes for cleaner and more compact code. -TYT, 9/17/92 * * Modified by Fred N. van Kempen, 01/29/93, to add line disciplines * which can be dynamically activated and de-activated by the line @@ -41,7 +41,7 @@ * * New TIOCLINUX variants added. * -- mj@k332.feld.cvut.cz, 19-Nov-95 - * + * * Restrict vt switching via ioctl() * -- grif@cs.ucr.edu, 5-Dec-95 * @@ -62,7 +62,8 @@ * -- Russell King <rmk@arm.linux.org.uk> * * Move do_SAK() into process context. Less stack use in devfs functions. - * alloc_tty_struct() always uses kmalloc() -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01 + * alloc_tty_struct() always uses kmalloc() + * -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01 */ #include <linux/types.h> @@ -126,7 +127,7 @@ EXPORT_SYMBOL(tty_std_termios); /* This list gets poked at by procfs and various bits of boot up code. This could do with some rationalisation such as pulling the tty proc function into this file */ - + LIST_HEAD(tty_drivers); /* linked list of tty drivers */ /* Mutex to protect creating and releasing a tty. This is shared with @@ -136,9 +137,9 @@ EXPORT_SYMBOL(tty_mutex); #ifdef CONFIG_UNIX98_PTYS extern struct tty_driver *ptm_driver; /* Unix98 pty masters; for /dev/ptmx */ -extern int pty_limit; /* Config limit on Unix98 ptys */ +extern int pty_limit; /* Config limit on Unix98 ptys */ static DEFINE_IDR(allocated_ptys); -static DECLARE_MUTEX(allocated_ptys_lock); +static DEFINE_MUTEX(allocated_ptys_lock); static int ptmx_open(struct inode *, struct file *); #endif @@ -146,19 +147,20 @@ static void initialize_tty_struct(struct tty_struct *tty); static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *); static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *); -ssize_t redirected_tty_write(struct file *, const char __user *, size_t, loff_t *); +ssize_t redirected_tty_write(struct file *, const char __user *, + size_t, loff_t *); static unsigned int tty_poll(struct file *, poll_table *); static int tty_open(struct inode *, struct file *); static int tty_release(struct inode *, struct file *); -int tty_ioctl(struct inode * inode, struct file * file, +int tty_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); #ifdef CONFIG_COMPAT -static long tty_compat_ioctl(struct file * file, unsigned int cmd, +static long tty_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg); #else #define tty_compat_ioctl NULL #endif -static int tty_fasync(int fd, struct file * filp, int on); +static int tty_fasync(int fd, struct file *filp, int on); static void release_tty(struct tty_struct *tty, int idx); static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty); static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty); @@ -244,7 +246,7 @@ static int check_tty_count(struct tty_struct *tty, const char *routine) #ifdef CHECK_TTY_COUNT struct list_head *p; int count = 0; - + file_list_lock(); list_for_each(p, &tty->tty_files) { count++; @@ -281,11 +283,11 @@ static int check_tty_count(struct tty_struct *tty, const char *routine) static void tty_buffer_free_all(struct tty_struct *tty) { struct tty_buffer *thead; - while((thead = tty->buf.head) != NULL) { + while ((thead = tty->buf.head) != NULL) { tty->buf.head = thead->next; kfree(thead); } - while((thead = tty->buf.free) != NULL) { + while ((thead = tty->buf.free) != NULL) { tty->buf.free = thead->next; kfree(thead); } @@ -331,7 +333,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size) if (tty->buf.memory_used + size > 65536) return NULL; p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC); - if(p == NULL) + if (p == NULL) return NULL; p->used = 0; p->size = size; @@ -361,7 +363,7 @@ static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b) tty->buf.memory_used -= b->size; WARN_ON(tty->buf.memory_used < 0); - if(b->size >= 512) + if (b->size >= 512) kfree(b); else { b->next = tty->buf.free; @@ -384,7 +386,7 @@ static void __tty_buffer_flush(struct tty_struct *tty) { struct tty_buffer *thead; - while((thead = tty->buf.head) != NULL) { + while ((thead = tty->buf.head) != NULL) { tty->buf.head = thead->next; tty_buffer_free(tty, thead); } @@ -436,9 +438,9 @@ static void tty_buffer_flush(struct tty_struct *tty) static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size) { struct tty_buffer **tbh = &tty->buf.free; - while((*tbh) != NULL) { + while ((*tbh) != NULL) { struct tty_buffer *t = *tbh; - if(t->size >= size) { + if (t->size >= size) { *tbh = t->next; t->next = NULL; t->used = 0; @@ -450,7 +452,7 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size) tbh = &((*tbh)->next); } /* Round the buffer size out */ - size = (size + 0xFF) & ~ 0xFF; + size = (size + 0xFF) & ~0xFF; return tty_buffer_alloc(tty, size); /* Should possibly check if this fails for the largest buffer we have queued and recycle that ? */ @@ -520,7 +522,7 @@ int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, int space = tty_buffer_request_room(tty, size - copied); struct tty_buffer *tb = tty->buf.tail; /* If there is no space then tb may be NULL */ - if(unlikely(space == 0)) + if (unlikely(space == 0)) break; memcpy(tb->char_buf_ptr + tb->used, chars, space); memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space); @@ -556,7 +558,7 @@ int tty_insert_flip_string_flags(struct tty_struct *tty, int space = tty_buffer_request_room(tty, size - copied); struct tty_buffer *tb = tty->buf.tail; /* If there is no space then tb may be NULL */ - if(unlikely(space == 0)) + if (unlikely(space == 0)) break; memcpy(tb->char_buf_ptr + tb->used, chars, space); memcpy(tb->flag_buf_ptr + tb->used, flags, space); @@ -608,7 +610,8 @@ EXPORT_SYMBOL(tty_schedule_flip); * Locking: May call functions taking tty->buf.lock */ -int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size) +int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, + size_t size) { int space = tty_buffer_request_room(tty, size); if (likely(space)) { @@ -638,7 +641,8 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string); * Locking: May call functions taking tty->buf.lock */ -int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size) +int tty_prepare_flip_string_flags(struct tty_struct *tty, + unsigned char **chars, char **flags, size_t size) { int space = tty_buffer_request_room(tty, size); if (likely(space)) { @@ -660,12 +664,12 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags); * @num: line discipline number * * This is probably overkill for real world processors but - * they are not on hot paths so a little discipline won't do + * they are not on hot paths so a little discipline won't do * any harm. * * Locking: takes termios_mutex */ - + static void tty_set_termios_ldisc(struct tty_struct *tty, int num) { mutex_lock(&tty->termios_mutex); @@ -678,10 +682,11 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) * must be taken with irqs off because there are hangup path * callers who will do ldisc lookups and cannot sleep. */ - + static DEFINE_SPINLOCK(tty_ldisc_lock); static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait); -static struct tty_ldisc tty_ldiscs[NR_LDISCS]; /* line disc dispatch table */ +/* Line disc dispatch table */ +static struct tty_ldisc tty_ldiscs[NR_LDISCS]; /** * tty_register_ldisc - install a line discipline @@ -700,17 +705,17 @@ int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc) { unsigned long flags; int ret = 0; - + if (disc < N_TTY || disc >= NR_LDISCS) return -EINVAL; - + spin_lock_irqsave(&tty_ldisc_lock, flags); tty_ldiscs[disc] = *new_ldisc; tty_ldiscs[disc].num = disc; tty_ldiscs[disc].flags |= LDISC_FLAG_DEFINED; tty_ldiscs[disc].refcount = 0; spin_unlock_irqrestore(&tty_ldisc_lock, flags); - + return ret; } EXPORT_SYMBOL(tty_register_ldisc); @@ -766,20 +771,18 @@ struct tty_ldisc *tty_ldisc_get(int disc) if (disc < N_TTY || disc >= NR_LDISCS) return NULL; - + spin_lock_irqsave(&tty_ldisc_lock, flags); ld = &tty_ldiscs[disc]; /* Check the entry is defined */ - if(ld->flags & LDISC_FLAG_DEFINED) - { + if (ld->flags & LDISC_FLAG_DEFINED) { /* If the module is being unloaded we can't use it */ if (!try_module_get(ld->owner)) - ld = NULL; + ld = NULL; else /* lock it */ ld->refcount++; - } - else + } else ld = NULL; spin_unlock_irqrestore(&tty_ldisc_lock, flags); return ld; @@ -802,9 +805,9 @@ void tty_ldisc_put(int disc) { struct tty_ldisc *ld; unsigned long flags; - + BUG_ON(disc < N_TTY || disc >= NR_LDISCS); - + spin_lock_irqsave(&tty_ldisc_lock, flags); ld = &tty_ldiscs[disc]; BUG_ON(ld->refcount == 0); @@ -812,7 +815,7 @@ void tty_ldisc_put(int disc) module_put(ld->owner); spin_unlock_irqrestore(&tty_ldisc_lock, flags); } - + EXPORT_SYMBOL_GPL(tty_ldisc_put); /** @@ -851,11 +854,10 @@ static int tty_ldisc_try(struct tty_struct *tty) unsigned long flags; struct tty_ldisc *ld; int ret = 0; - + spin_lock_irqsave(&tty_ldisc_lock, flags); ld = &tty->ldisc; - if(test_bit(TTY_LDISC, &tty->flags)) - { + if (test_bit(TTY_LDISC, &tty->flags)) { ld->refcount++; ret = 1; } @@ -867,8 +869,8 @@ static int tty_ldisc_try(struct tty_struct *tty) * tty_ldisc_ref_wait - wait for the tty ldisc * @tty: tty device * - * Dereference the line discipline for the terminal and take a - * reference to it. If the line discipline is in flux then + * Dereference the line discipline for the terminal and take a + * reference to it. If the line discipline is in flux then * wait patiently until it changes. * * Note: Must not be called from an IRQ/timer context. The caller @@ -878,12 +880,12 @@ static int tty_ldisc_try(struct tty_struct *tty) * * Locking: call functions take tty_ldisc_lock */ - + struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) { /* wait_event is a macro */ wait_event(tty_ldisc_wait, tty_ldisc_try(tty)); - if(tty->ldisc.refcount == 0) + if (tty->ldisc.refcount == 0) printk(KERN_ERR "tty_ldisc_ref_wait\n"); return &tty->ldisc; } @@ -894,16 +896,16 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); * tty_ldisc_ref - get the tty ldisc * @tty: tty device * - * Dereference the line discipline for the terminal and take a - * reference to it. If the line discipline is in flux then + * Dereference the line discipline for the terminal and take a + * reference to it. If the line discipline is in flux then * return NULL. Can be called from IRQ and timer functions. * * Locking: called functions take tty_ldisc_lock */ - + struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty) { - if(tty_ldisc_try(tty)) + if (tty_ldisc_try(tty)) return &tty->ldisc; return NULL; } @@ -919,19 +921,19 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref); * * Locking: takes tty_ldisc_lock */ - + void tty_ldisc_deref(struct tty_ldisc *ld) { unsigned long flags; BUG_ON(ld == NULL); - + spin_lock_irqsave(&tty_ldisc_lock, flags); - if(ld->refcount == 0) + if (ld->refcount == 0) printk(KERN_ERR "tty_ldisc_deref: no references.\n"); else ld->refcount--; - if(ld->refcount == 0) + if (ld->refcount == 0) wake_up(&tty_ldisc_wait); spin_unlock_irqrestore(&tty_ldisc_lock, flags); } @@ -954,7 +956,7 @@ static void tty_ldisc_enable(struct tty_struct *tty) set_bit(TTY_LDISC, &tty->flags); wake_up(&tty_ldisc_wait); } - + /** * tty_set_ldisc - set line discipline * @tty: the terminal to set @@ -966,7 +968,7 @@ static void tty_ldisc_enable(struct tty_struct *tty) * Locking: takes tty_ldisc_lock. * called functions take termios_mutex */ - + static int tty_set_ldisc(struct tty_struct *tty, int ldisc) { int retval = 0; @@ -1022,7 +1024,7 @@ restart: spin_lock_irqsave(&tty_ldisc_lock, flags); if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) { - if(tty->ldisc.refcount) { + if (tty->ldisc.refcount) { /* Free the new ldisc we grabbed. Must drop the lock first. */ spin_unlock_irqrestore(&tty_ldisc_lock, flags); @@ -1031,14 +1033,14 @@ restart: * There are several reasons we may be busy, including * random momentary I/O traffic. We must therefore * retry. We could distinguish between blocking ops - * and retries if we made tty_ldisc_wait() smarter. That - * is up for discussion. + * and retries if we made tty_ldisc_wait() smarter. + * That is up for discussion. */ if (wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0) return -ERESTARTSYS; goto restart; } - if(o_tty && o_tty->ldisc.refcount) { + if (o_tty && o_tty->ldisc.refcount) { spin_unlock_irqrestore(&tty_ldisc_lock, flags); tty_ldisc_put(ldisc); if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0) @@ -1046,9 +1048,10 @@ restart: goto restart; } } - - /* if the TTY_LDISC bit is set, then we are racing against another ldisc change */ - + /* + * If the TTY_LDISC bit is set, then we are racing against + * another ldisc change + */ if (!test_bit(TTY_LDISC, &tty->flags)) { spin_unlock_irqrestore(&tty_ldisc_lock, flags); tty_ldisc_put(ldisc); @@ -1072,7 +1075,6 @@ restart: /* * Wait for ->hangup_work and ->buf.work handlers to terminate */ - flush_scheduled_work(); /* Shutdown the current discipline. */ if (tty->ldisc.close) @@ -1106,21 +1108,21 @@ restart: /* At this point we hold a reference to the new ldisc and a a reference to the old ldisc. If we ended up flipping back to the existing ldisc we have two references to it */ - + if (tty->ldisc.num != o_ldisc.num && tty->driver->set_ldisc) tty->driver->set_ldisc(tty); - + tty_ldisc_put(o_ldisc.num); - + /* * Allow ldisc referencing to occur as soon as the driver * ldisc callback completes. */ - + tty_ldisc_enable(tty); if (o_tty) tty_ldisc_enable(o_tty); - + /* Restart it in case no characters kick it off. Safe if already running */ if (work) @@ -1164,7 +1166,7 @@ static struct tty_driver *get_tty_driver(dev_t device, int *index) * Locking: none */ -int tty_check_change(struct tty_struct * tty) +int tty_check_change(struct tty_struct *tty) { if (current->signal->tty != tty) return 0; @@ -1185,31 +1187,31 @@ int tty_check_change(struct tty_struct * tty) EXPORT_SYMBOL(tty_check_change); -static ssize_t hung_up_tty_read(struct file * file, char __user * buf, +static ssize_t hung_up_tty_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { return 0; } -static ssize_t hung_up_tty_write(struct file * file, const char __user * buf, +static ssize_t hung_up_tty_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { return -EIO; } /* No kernel lock held - none needed ;) */ -static unsigned int hung_up_tty_poll(struct file * filp, poll_table * wait) +static unsigned int hung_up_tty_poll(struct file *filp, poll_table *wait) { return POLLIN | POLLOUT | POLLERR | POLLHUP | POLLRDNORM | POLLWRNORM; } -static int hung_up_tty_ioctl(struct inode * inode, struct file * file, +static int hung_up_tty_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { return cmd == TIOCSPGRP ? -ENOTTY : -EIO; } -static long hung_up_tty_compat_ioctl(struct file * file, +static long hung_up_tty_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { return cmd == TIOCSPGRP ? -ENOTTY : -EIO; @@ -1274,15 +1276,15 @@ static struct file *redirect; * informs the line discipline if present that the driver is ready * to receive more output data. */ - + void tty_wakeup(struct tty_struct *tty) { struct tty_ldisc *ld; - + if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) { ld = tty_ldisc_ref(tty); - if(ld) { - if(ld->write_wakeup) + if (ld) { + if (ld->write_wakeup) ld->write_wakeup(tty); tty_ldisc_deref(ld); } @@ -1299,12 +1301,12 @@ EXPORT_SYMBOL_GPL(tty_wakeup); * Flush the line discipline queue (if any) for this tty. If there * is no line discipline active this is a no-op. */ - + void tty_ldisc_flush(struct tty_struct *tty) { struct tty_ldisc *ld = tty_ldisc_ref(tty); - if(ld) { - if(ld->flush_buffer) + if (ld) { + if (ld->flush_buffer) ld->flush_buffer(tty); tty_ldisc_deref(ld); } @@ -1328,7 +1330,7 @@ static void tty_reset_termios(struct tty_struct *tty) tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios); mutex_unlock(&tty->termios_mutex); } - + /** * do_tty_hangup - actual handler for hangup events * @work: tty device @@ -1355,7 +1357,7 @@ static void do_tty_hangup(struct work_struct *work) { struct tty_struct *tty = container_of(work, struct tty_struct, hangup_work); - struct file * cons_filp = NULL; + struct file *cons_filp = NULL; struct file *filp, *f = NULL; struct task_struct *p; struct tty_ldisc *ld; @@ -1373,7 +1375,7 @@ static void do_tty_hangup(struct work_struct *work) redirect = NULL; } spin_unlock(&redirect_lock); - + check_tty_count(tty, "do_tty_hangup"); file_list_lock(); /* This breaks for file handles being sent over AF_UNIX sockets ? */ @@ -1387,13 +1389,14 @@ static void do_tty_hangup(struct work_struct *work) filp->f_op = &hung_up_tty_fops; } file_list_unlock(); - - /* FIXME! What are the locking issues here? This may me overdoing things.. - * this question is especially important now that we've removed the irqlock. */ - + /* + * FIXME! What are the locking issues here? This may me overdoing + * things... This question is especially important now that we've + * removed the irqlock. + */ ld = tty_ldisc_ref(tty); - if(ld != NULL) /* We may have no line discipline at this point */ - { + if (ld != NULL) { + /* We may have no line discipline at this point */ if (ld->flush_buffer) ld->flush_buffer(tty); if (tty->driver->flush_buffer) @@ -1404,26 +1407,24 @@ static void do_tty_hangup(struct work_struct *work) if (ld->hangup) ld->hangup(tty); } - - /* FIXME: Once we trust the LDISC code better we can wait here for - ldisc completion and fix the driver call race */ - + /* + * FIXME: Once we trust the LDISC code better we can wait here for + * ldisc completion and fix the driver call race + */ wake_up_interruptible(&tty->write_wait); wake_up_interruptible(&tty->read_wait); - /* * Shutdown the current line discipline, and reset it to * N_TTY. */ if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) tty_reset_termios(tty); - /* Defer ldisc switch */ /* tty_deferred_ldisc_switch(N_TTY); - + This should get done automatically when the port closes and tty_release is called */ - + read_lock(&tasklist_lock); if (tty->session) { do_each_pid_task(tty->session, PIDTYPE_SID, p) { @@ -1451,10 +1452,10 @@ static void do_tty_hangup(struct work_struct *work) tty->pgrp = NULL; tty->ctrl_status = 0; /* - * If one of the devices matches a console pointer, we - * cannot just call hangup() because that will cause - * tty->count and state->count to go out of sync. - * So we just call close() the right number of times. + * If one of the devices matches a console pointer, we + * cannot just call hangup() because that will cause + * tty->count and state->count to go out of sync. + * So we just call close() the right number of times. */ if (cons_filp) { if (tty->driver->close) @@ -1462,12 +1463,12 @@ static void do_tty_hangup(struct work_struct *work) tty->driver->close(tty, cons_filp); } else if (tty->driver->hangup) (tty->driver->hangup)(tty); - - /* We don't want to have driver/ldisc interactions beyond - the ones we did here. The driver layer expects no - calls after ->hangup() from the ldisc side. However we - can't yet guarantee all that */ - + /* + * We don't want to have driver/ldisc interactions beyond + * the ones we did here. The driver layer expects no + * calls after ->hangup() from the ldisc side. However we + * can't yet guarantee all that. + */ set_bit(TTY_HUPPED, &tty->flags); if (ld) { tty_ldisc_enable(tty); @@ -1486,11 +1487,10 @@ static void do_tty_hangup(struct work_struct *work) * schedule a hangup sequence to run after this event. */ -void tty_hangup(struct tty_struct * tty) +void tty_hangup(struct tty_struct *tty) { #ifdef TTY_DEBUG_HANGUP char buf[64]; - printk(KERN_DEBUG "%s hangup...\n", tty_name(tty, buf)); #endif schedule_work(&tty->hangup_work); @@ -1507,7 +1507,7 @@ EXPORT_SYMBOL(tty_hangup); * is complete. That guarantee is necessary for security reasons. */ -void tty_vhangup(struct tty_struct * tty) +void tty_vhangup(struct tty_struct *tty) { #ifdef TTY_DEBUG_HANGUP char buf[64]; @@ -1516,6 +1516,7 @@ void tty_vhangup(struct tty_struct * tty) #endif do_tty_hangup(&tty->hangup_work); } + EXPORT_SYMBOL(tty_vhangup); /** @@ -1526,7 +1527,7 @@ EXPORT_SYMBOL(tty_vhangup); * loss */ -int tty_hung_up_p(struct file * filp) +int tty_hung_up_p(struct file *filp) { return (filp->f_op == &hung_up_tty_fops); } @@ -1534,8 +1535,12 @@ int tty_hung_up_p(struct file * filp) EXPORT_SYMBOL(tty_hung_up_p); /** - * is_tty - checker whether file is a TTY + * is_tty - checker whether file is a TTY + * @filp: file handle that may be a tty + * + * Check if the file handle is a tty handle. */ + int is_tty(struct file *filp) { return filp->f_op->read == tty_read @@ -1601,7 +1606,7 @@ void disassociate_ctty(int on_exit) put_pid(old_pgrp); } mutex_unlock(&tty_mutex); - unlock_kernel(); + unlock_kernel(); return; } if (tty_pgrp) { @@ -1711,7 +1716,6 @@ void start_tty(struct tty_struct *tty) } if (tty->driver->start) (tty->driver->start)(tty); - /* If we have a running line discipline it may need kicking */ tty_wakeup(tty); } @@ -1735,11 +1739,11 @@ EXPORT_SYMBOL(start_tty); * in new code. Multiple read calls may be outstanding in parallel. */ -static ssize_t tty_read(struct file * file, char __user * buf, size_t count, +static ssize_t tty_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { int i; - struct tty_struct * tty; + struct tty_struct *tty; struct inode *inode; struct tty_ldisc *ld; @@ -1755,7 +1759,7 @@ static ssize_t tty_read(struct file * file, char __user * buf, size_t count, ld = tty_ldisc_ref_wait(tty); lock_kernel(); if (ld->read) - i = (ld->read)(tty,file,buf,count); + i = (ld->read)(tty, file, buf, count); else i = -EIO; tty_ldisc_deref(ld); @@ -1795,7 +1799,7 @@ static inline ssize_t do_tty_write( { ssize_t ret, written = 0; unsigned int chunk; - + ret = tty_write_lock(tty, file->f_flags & O_NDELAY); if (ret < 0) return ret; @@ -1891,21 +1895,22 @@ out: * kernel lock for historical reasons. New code should not rely on this. */ -static ssize_t tty_write(struct file * file, const char __user * buf, size_t count, - loff_t *ppos) +static ssize_t tty_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { - struct tty_struct * tty; + struct tty_struct *tty; struct inode *inode = file->f_path.dentry->d_inode; ssize_t ret; struct tty_ldisc *ld; - + tty = (struct tty_struct *)file->private_data; if (tty_paranoia_check(tty, inode, "tty_write")) return -EIO; - if (!tty || !tty->driver->write || (test_bit(TTY_IO_ERROR, &tty->flags))) - return -EIO; + if (!tty || !tty->driver->write || + (test_bit(TTY_IO_ERROR, &tty->flags))) + return -EIO; - ld = tty_ldisc_ref_wait(tty); + ld = tty_ldisc_ref_wait(tty); if (!ld->write) ret = -EIO; else @@ -1914,8 +1919,8 @@ static ssize_t tty_write(struct file * file, const char __user * buf, size_t cou return ret; } -ssize_t redirected_tty_write(struct file * file, const char __user * buf, size_t count, - loff_t *ppos) +ssize_t redirected_tty_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { struct file *p = NULL; @@ -1932,7 +1937,6 @@ ssize_t redirected_tty_write(struct file * file, const char __user * buf, size_t fput(p); return res; } - return tty_write(file, buf, count, ppos); } @@ -1954,8 +1958,8 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p) int i = index + driver->name_base; /* ->name is initialized to "ttyp", but "tty" is expected */ sprintf(p, "%s%c%x", - driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name, - ptychar[i >> 4 & 0xf], i & 0xf); + driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name, + ptychar[i >> 4 & 0xf], i & 0xf); } /** @@ -2034,7 +2038,7 @@ static int init_dev(struct tty_driver *driver, int idx, * First time open is complex, especially for PTY devices. * This code guarantees that either everything succeeds and the * TTY is ready for operation, or else the table slots are vacated - * and the allocated memory released. (Except that the termios + * and the allocated memory released. (Except that the termios * and locked termios may be retained.) */ @@ -2048,7 +2052,7 @@ static int init_dev(struct tty_driver *driver, int idx, ltp = o_ltp = NULL; tty = alloc_tty_struct(); - if(!tty) + if (!tty) goto fail_no_mem; initialize_tty_struct(tty); tty->driver = driver; @@ -2109,9 +2113,8 @@ static int init_dev(struct tty_driver *driver, int idx, /* * Everything allocated ... set up the o_tty structure. */ - if (!(driver->other->flags & TTY_DRIVER_DEVPTS_MEM)) { + if (!(driver->other->flags & TTY_DRIVER_DEVPTS_MEM)) driver->other->ttys[idx] = o_tty; - } if (!*o_tp_loc) *o_tp_loc = o_tp; if (!*o_ltp_loc) @@ -2127,15 +2130,14 @@ static int init_dev(struct tty_driver *driver, int idx, o_tty->link = tty; } - /* + /* * All structures have been allocated, so now we install them. * Failures after this point use release_tty to clean up, so * there's no need to null out the local pointers. */ - if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM)) { + if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM)) driver->ttys[idx] = tty; - } - + if (!*tp_loc) *tp_loc = tp; if (!*ltp_loc) @@ -2148,7 +2150,7 @@ static int init_dev(struct tty_driver *driver, int idx, driver->refcount++; tty->count++; - /* + /* * Structures all installed ... call the ldisc open routines. * If we fail here just call release_tty to clean up. No need * to decrement the use counts, as release_tty doesn't care. @@ -2185,7 +2187,7 @@ fast_track: if (driver->type == TTY_DRIVER_TYPE_PTY && driver->subtype == PTY_TYPE_MASTER) { /* - * special case for PTY masters: only one open permitted, + * special case for PTY masters: only one open permitted, * and the slave side open count is incremented as well. */ if (tty->count) { @@ -2198,11 +2200,11 @@ fast_track: tty->driver = driver; /* N.B. why do this every time?? */ /* FIXME */ - if(!test_bit(TTY_LDISC, &tty->flags)) + if (!test_bit(TTY_LDISC, &tty->flags)) printk(KERN_ERR "init_dev but no ldisc\n"); success: *ret_tty = tty; - + /* All paths come through here to release the mutex */ end_init: return retval; @@ -2304,7 +2306,7 @@ static void release_tty(struct tty_struct *tty, int idx) * WSH 09/09/97: rewritten to avoid some nasty race conditions that could * lead to double frees or releasing memory still in use. */ -static void release_dev(struct file * filp) +static void release_dev(struct file *filp) { struct tty_struct *tty, *o_tty; int pty_master, tty_closing, o_tty_closing, do_sleep; @@ -2312,9 +2314,10 @@ static void release_dev(struct file * filp) int idx; char buf[64]; unsigned long flags; - + tty = (struct tty_struct *)filp->private_data; - if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "release_dev")) + if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, + "release_dev")) return; check_tty_count(tty, "release_dev"); @@ -2374,7 +2377,7 @@ static void release_dev(struct file * filp) idx, tty->name); return; } - if (o_tty->termios_locked != + if (o_tty->termios_locked != tty->driver->other->termios_locked[idx]) { printk(KERN_DEBUG "release_dev: other->termios_locked[" "%d] not o_termios_locked for (%s)\n", @@ -2410,7 +2413,7 @@ static void release_dev(struct file * filp) while (1) { /* Guard against races with tty->count changes elsewhere and opens on /dev/tty */ - + mutex_lock(&tty_mutex); tty_closing = tty->count <= 1; o_tty_closing = o_tty && @@ -2444,11 +2447,11 @@ static void release_dev(struct file * filp) "active!\n", tty_name(tty, buf)); mutex_unlock(&tty_mutex); schedule(); - } + } /* - * The closing flags are now consistent with the open counts on - * both sides, and we've completed the last operation that could + * The closing flags are now consistent with the open counts on + * both sides, and we've completed the last operation that could * block, so it's safe to proceed with closing. */ if (pty_master) { @@ -2464,7 +2467,7 @@ static void release_dev(struct file * filp) tty->count, tty_name(tty, buf)); tty->count = 0; } - + /* * We've decremented tty->count, so we need to remove this file * descriptor off the tty->tty_files list; this serves two @@ -2484,9 +2487,9 @@ static void release_dev(struct file * filp) * case of a pty we may have to wait around for the other side * to close, and TTY_CLOSING makes sure we can't be reopened. */ - if(tty_closing) + if (tty_closing) set_bit(TTY_CLOSING, &tty->flags); - if(o_tty_closing) + if (o_tty_closing) set_bit(TTY_CLOSING, &o_tty->flags); /* @@ -2507,7 +2510,7 @@ static void release_dev(struct file * filp) /* check whether both sides are closing ... */ if (!tty_closing || (o_tty && !o_tty_closing)) return; - + #ifdef TTY_DEBUG_HANGUP printk(KERN_DEBUG "freeing tty structure..."); #endif @@ -2522,17 +2525,16 @@ static void release_dev(struct file * filp) /* * Wait for ->hangup_work and ->buf.work handlers to terminate */ - + flush_scheduled_work(); - + /* * Wait for any short term users (we know they are just driver * side waiters as the file is closing so user count on the file * side is zero. */ spin_lock_irqsave(&tty_ldisc_lock, flags); - while(tty->ldisc.refcount) - { + while (tty->ldisc.refcount) { spin_unlock_irqrestore(&tty_ldisc_lock, flags); wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0); spin_lock_irqsave(&tty_ldisc_lock, flags); @@ -2547,12 +2549,12 @@ static void release_dev(struct file * filp) if (tty->ldisc.close) (tty->ldisc.close)(tty); tty_ldisc_put(tty->ldisc.num); - + /* * Switch the line discipline back */ tty_ldisc_assign(tty, tty_ldisc_get(N_TTY)); - tty_set_termios_ldisc(tty,N_TTY); + tty_set_termios_ldisc(tty, N_TTY); if (o_tty) { /* FIXME: could o_tty be in setldisc here ? */ clear_bit(TTY_LDISC, &o_tty->flags); @@ -2560,7 +2562,7 @@ static void release_dev(struct file * filp) (o_tty->ldisc.close)(o_tty); tty_ldisc_put(o_tty->ldisc.num); tty_ldisc_assign(o_tty, tty_ldisc_get(N_TTY)); - tty_set_termios_ldisc(o_tty,N_TTY); + tty_set_termios_ldisc(o_tty, N_TTY); } /* * The release_tty function takes care of the details of clearing @@ -2571,9 +2573,9 @@ static void release_dev(struct file * filp) #ifdef CONFIG_UNIX98_PTYS /* Make this pty number available for reallocation */ if (devpts) { - down(&allocated_ptys_lock); + mutex_lock(&allocated_ptys_lock); idr_remove(&allocated_ptys, idx); - up(&allocated_ptys_lock); + mutex_unlock(&allocated_ptys_lock); } #endif @@ -2600,7 +2602,7 @@ static void release_dev(struct file * filp) * ->siglock protects ->signal/->sighand */ -static int tty_open(struct inode * inode, struct file * filp) +static int tty_open(struct inode *inode, struct file *filp) { struct tty_struct *tty; int noctty, retval; @@ -2610,15 +2612,15 @@ static int tty_open(struct inode * inode, struct file * filp) unsigned short saved_flags = filp->f_flags; nonseekable_open(inode, filp); - + retry_open: noctty = filp->f_flags & O_NOCTTY; index = -1; retval = 0; - + mutex_lock(&tty_mutex); - if (device == MKDEV(TTYAUX_MAJOR,0)) { + if (device == MKDEV(TTYAUX_MAJOR, 0)) { tty = get_current_tty(); if (!tty) { mutex_unlock(&tty_mutex); @@ -2631,7 +2633,7 @@ retry_open: goto got_driver; } #ifdef CONFIG_VT - if (device == MKDEV(TTY_MAJOR,0)) { + if (device == MKDEV(TTY_MAJOR, 0)) { extern struct tty_driver *console_driver; driver = console_driver; index = fg_console; @@ -2639,7 +2641,7 @@ retry_open: goto got_driver; } #endif - if (device == MKDEV(TTYAUX_MAJOR,1)) { + if (device == MKDEV(TTYAUX_MAJOR, 1)) { driver = console_device(&index); if (driver) { /* Don't let /dev/console block */ @@ -2679,7 +2681,8 @@ got_driver: } filp->f_flags = saved_flags; - if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN)) + if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) && + !capable(CAP_SYS_ADMIN)) retval = -EBUSY; if (retval) { @@ -2723,11 +2726,11 @@ got_driver: * Allocate a unix98 pty master device from the ptmx driver. * * Locking: tty_mutex protects theinit_dev work. tty->count should - protect the rest. + * protect the rest. * allocated_ptys_lock handles the list of free pty numbers */ -static int ptmx_open(struct inode * inode, struct file * filp) +static int ptmx_open(struct inode *inode, struct file *filp) { struct tty_struct *tty; int retval; @@ -2737,29 +2740,29 @@ static int ptmx_open(struct inode * inode, struct file * filp) nonseekable_open(inode, filp); /* find a device that is not in use. */ - down(&allocated_ptys_lock); + mutex_lock(&allocated_ptys_lock); if (!idr_pre_get(&allocated_ptys, GFP_KERNEL)) { - up(&allocated_ptys_lock); + mutex_unlock(&allocated_ptys_lock); return -ENOMEM; } idr_ret = idr_get_new(&allocated_ptys, NULL, &index); if (idr_ret < 0) { - up(&allocated_ptys_lock); + mutex_unlock(&allocated_ptys_lock); if (idr_ret == -EAGAIN) return -ENOMEM; return -EIO; } if (index >= pty_limit) { idr_remove(&allocated_ptys, index); - up(&allocated_ptys_lock); + mutex_unlock(&allocated_ptys_lock); return -EIO; } - up(&allocated_ptys_lock); + mutex_unlock(&allocated_ptys_lock); mutex_lock(&tty_mutex); retval = init_dev(ptm_driver, index, &tty); mutex_unlock(&tty_mutex); - + if (retval) goto out; @@ -2781,9 +2784,9 @@ out1: release_dev(filp); return retval; out: - down(&allocated_ptys_lock); + mutex_lock(&allocated_ptys_lock); idr_remove(&allocated_ptys, index); - up(&allocated_ptys_lock); + mutex_unlock(&allocated_ptys_lock); return retval; } #endif @@ -2800,7 +2803,7 @@ out: * Takes bkl. See release_dev */ -static int tty_release(struct inode * inode, struct file * filp) +static int tty_release(struct inode *inode, struct file *filp) { lock_kernel(); release_dev(filp); @@ -2820,16 +2823,16 @@ static int tty_release(struct inode * inode, struct file * filp) * may be re-entered freely by other callers. */ -static unsigned int tty_poll(struct file * filp, poll_table * wait) +static unsigned int tty_poll(struct file *filp, poll_table *wait) { - struct tty_struct * tty; + struct tty_struct *tty; struct tty_ldisc *ld; int ret = 0; tty = (struct tty_struct *)filp->private_data; if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_poll")) return 0; - + ld = tty_ldisc_ref_wait(tty); if (ld->poll) ret = (ld->poll)(tty, filp, wait); @@ -2837,15 +2840,15 @@ static unsigned int tty_poll(struct file * filp, poll_table * wait) return ret; } -static int tty_fasync(int fd, struct file * filp, int on) +static int tty_fasync(int fd, struct file *filp, int on) { - struct tty_struct * tty; + struct tty_struct *tty; int retval; tty = (struct tty_struct *)filp->private_data; if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_fasync")) return 0; - + retval = fasync_helper(fd, filp, on, &tty->fasync); if (retval <= 0) return retval; @@ -2893,7 +2896,7 @@ static int tiocsti(struct tty_struct *tty, char __user *p) { char ch, mbz = 0; struct tty_ldisc *ld; - + if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN)) return -EPERM; if (get_user(ch, p)) @@ -2915,7 +2918,7 @@ static int tiocsti(struct tty_struct *tty, char __user *p) * is consistent. */ -static int tiocgwinsz(struct tty_struct *tty, struct winsize __user * arg) +static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) { int err; @@ -2944,7 +2947,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user * arg) */ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize __user * arg) + struct winsize __user *arg) { struct winsize tmp_ws; @@ -2960,7 +2963,7 @@ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty, if (vc_lock_resize(tty->driver_data, tmp_ws.ws_col, tmp_ws.ws_row)) { mutex_unlock(&tty->termios_mutex); - return -ENXIO; + return -ENXIO; } } #endif @@ -3070,7 +3073,7 @@ static int tiocsctty(struct tty_struct *tty, int arg) * This tty is already the controlling * tty for another session group! */ - if ((arg == 1) && capable(CAP_SYS_ADMIN)) { + if (arg == 1 && capable(CAP_SYS_ADMIN)) { /* * Steal it away */ @@ -3303,14 +3306,14 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int /* * Split this up, as gcc can choke on it otherwise.. */ -int tty_ioctl(struct inode * inode, struct file * file, +int tty_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct tty_struct *tty, *real_tty; void __user *p = (void __user *)arg; int retval; struct tty_ldisc *ld; - + tty = (struct tty_struct *)file->private_data; if (tty_paranoia_check(tty, inode, "tty_ioctl")) return -EINVAL; @@ -3326,13 +3329,13 @@ int tty_ioctl(struct inode * inode, struct file * file, * Break handling by driver */ if (!tty->driver->break_ctl) { - switch(cmd) { + switch (cmd) { case TIOCSBRK: case TIOCCBRK: if (tty->driver->ioctl) return tty->driver->ioctl(tty, file, cmd, arg); return -EINVAL; - + /* These two ioctl's always return success; even if */ /* the driver doesn't support them. */ case TCSBRK: @@ -3354,7 +3357,7 @@ int tty_ioctl(struct inode * inode, struct file * file, case TIOCSBRK: case TIOCCBRK: case TCSBRK: - case TCSBRKP: + case TCSBRKP: retval = tty_check_change(tty); if (retval) return retval; @@ -3367,81 +3370,80 @@ int tty_ioctl(struct inode * inode, struct file * file, } switch (cmd) { - case TIOCSTI: - return tiocsti(tty, p); - case TIOCGWINSZ: - return tiocgwinsz(tty, p); - case TIOCSWINSZ: - return tiocswinsz(tty, real_tty, p); - case TIOCCONS: - return real_tty!=tty ? -EINVAL : tioccons(file); - case FIONBIO: - return fionbio(file, p); - case TIOCEXCL: - set_bit(TTY_EXCLUSIVE, &tty->flags); - return 0; - case TIOCNXCL: - clear_bit(TTY_EXCLUSIVE, &tty->flags); - return 0; - case TIOCNOTTY: - if (current->signal->tty != tty) - return -ENOTTY; - no_tty(); - return 0; - case TIOCSCTTY: - return tiocsctty(tty, arg); - case TIOCGPGRP: - return tiocgpgrp(tty, real_tty, p); - case TIOCSPGRP: - return tiocspgrp(tty, real_tty, p); - case TIOCGSID: - return tiocgsid(tty, real_tty, p); - case TIOCGETD: - /* FIXME: check this is ok */ - return put_user(tty->ldisc.num, (int __user *)p); - case TIOCSETD: - return tiocsetd(tty, p); + case TIOCSTI: + return tiocsti(tty, p); + case TIOCGWINSZ: + return tiocgwinsz(tty, p); + case TIOCSWINSZ: + return tiocswinsz(tty, real_tty, p); + case TIOCCONS: + return real_tty != tty ? -EINVAL : tioccons(file); + case FIONBIO: + return fionbio(file, p); + case TIOCEXCL: + set_bit(TTY_EXCLUSIVE, &tty->flags); + return 0; + case TIOCNXCL: + clear_bit(TTY_EXCLUSIVE, &tty->flags); + return 0; + case TIOCNOTTY: + if (current->signal->tty != tty) + return -ENOTTY; + no_tty(); + return 0; + case TIOCSCTTY: + return tiocsctty(tty, arg); + case TIOCGPGRP: + return tiocgpgrp(tty, real_tty, p); + case TIOCSPGRP: + return tiocspgrp(tty, real_tty, p); + case TIOCGSID: + return tiocgsid(tty, real_tty, p); + case TIOCGETD: + /* FIXME: check this is ok */ + return put_user(tty->ldisc.num, (int __user *)p); + case TIOCSETD: + return tiocsetd(tty, p); #ifdef CONFIG_VT - case TIOCLINUX: - return tioclinux(tty, arg); + case TIOCLINUX: + return tioclinux(tty, arg); #endif - /* - * Break handling - */ - case TIOCSBRK: /* Turn break on, unconditionally */ - tty->driver->break_ctl(tty, -1); - return 0; - - case TIOCCBRK: /* Turn break off, unconditionally */ - tty->driver->break_ctl(tty, 0); - return 0; - case TCSBRK: /* SVID version: non-zero arg --> no break */ - /* non-zero arg means wait for all output data - * to be sent (performed above) but don't send break. - * This is used by the tcdrain() termios function. - */ - if (!arg) - return send_break(tty, 250); - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - return send_break(tty, arg ? arg*100 : 250); - - case TIOCMGET: - return tty_tiocmget(tty, file, p); + /* + * Break handling + */ + case TIOCSBRK: /* Turn break on, unconditionally */ + tty->driver->break_ctl(tty, -1); + return 0; - case TIOCMSET: - case TIOCMBIC: - case TIOCMBIS: - return tty_tiocmset(tty, file, cmd, p); - case TCFLSH: - switch (arg) { - case TCIFLUSH: - case TCIOFLUSH: - /* flush tty buffer and allow ldisc to process ioctl */ - tty_buffer_flush(tty); - break; - } + case TIOCCBRK: /* Turn break off, unconditionally */ + tty->driver->break_ctl(tty, 0); + return 0; + case TCSBRK: /* SVID version: non-zero arg --> no break */ + /* non-zero arg means wait for all output data + * to be sent (performed above) but don't send break. + * This is used by the tcdrain() termios function. + */ + if (!arg) + return send_break(tty, 250); + return 0; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + return send_break(tty, arg ? arg*100 : 250); + + case TIOCMGET: + return tty_tiocmget(tty, file, p); + case TIOCMSET: + case TIOCMBIC: + case TIOCMBIS: + return tty_tiocmset(tty, file, cmd, p); + case TCFLSH: + switch (arg) { + case TCIFLUSH: + case TCIOFLUSH: + /* flush tty buffer and allow ldisc to process ioctl */ + tty_buffer_flush(tty); break; + } + break; } if (tty->driver->ioctl) { retval = (tty->driver->ioctl)(tty, file, cmd, arg); @@ -3460,7 +3462,7 @@ int tty_ioctl(struct inode * inode, struct file * file, } #ifdef CONFIG_COMPAT -static long tty_compat_ioctl(struct file * file, unsigned int cmd, +static long tty_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct inode *inode = file->f_dentry->d_inode; @@ -3491,7 +3493,7 @@ static long tty_compat_ioctl(struct file * file, unsigned int cmd, * prevent trojan horses by killing all processes associated with this * tty when the user hits the "Secure Attention Key". Required for * super-paranoid applications --- see the Orange Book for more details. - * + * * This code could be nicer; ideally it should send a HUP, wait a few * seconds, then send a INT, and then a KILL signal. But you then * have to coordinate with the init process, since all processes associated @@ -3515,16 +3517,16 @@ void __do_SAK(struct tty_struct *tty) int i; struct file *filp; struct fdtable *fdt; - + if (!tty) return; session = tty->session; - + tty_ldisc_flush(tty); if (tty->driver->flush_buffer) tty->driver->flush_buffer(tty); - + read_lock(&tasklist_lock); /* Kill the entire session */ do_each_pid_task(session, PIDTYPE_SID, p) { @@ -3552,7 +3554,7 @@ void __do_SAK(struct tty_struct *tty) */ spin_lock(&p->files->file_lock); fdt = files_fdtable(p->files); - for (i=0; i < fdt->max_fds; i++) { + for (i = 0; i < fdt->max_fds; i++) { filp = fcheck_files(p->files, i); if (!filp) continue; @@ -3606,7 +3608,7 @@ EXPORT_SYMBOL(do_SAK); * while invoking the line discipline receive_buf method. The * receive_buf method is single threaded for each tty instance. */ - + static void flush_to_ldisc(struct work_struct *work) { struct tty_struct *tty = @@ -3622,7 +3624,8 @@ static void flush_to_ldisc(struct work_struct *work) return; spin_lock_irqsave(&tty->buf.lock, flags); - set_bit(TTY_FLUSHING, &tty->flags); /* So we know a flush is running */ + /* So we know a flush is running */ + set_bit(TTY_FLUSHING, &tty->flags); head = tty->buf.head; if (head != NULL) { tty->buf.head = NULL; @@ -3721,7 +3724,6 @@ static void initialize_tty_struct(struct tty_struct *tty) tty->buf.head = tty->buf.tail = NULL; tty_buffer_init(tty); INIT_DELAYED_WORK(&tty->buf.work, flush_to_ldisc); - init_MUTEX(&tty->buf.pty_sem); mutex_init(&tty->termios_mutex); init_waitqueue_head(&tty->write_wait); init_waitqueue_head(&tty->read_wait); @@ -3796,7 +3798,8 @@ struct device *tty_register_device(struct tty_driver *driver, unsigned index, void tty_unregister_device(struct tty_driver *driver, unsigned index) { - device_destroy(tty_class, MKDEV(driver->major, driver->minor_start) + index); + device_destroy(tty_class, + MKDEV(driver->major, driver->minor_start) + index); } EXPORT_SYMBOL(tty_register_device); @@ -3860,7 +3863,7 @@ EXPORT_SYMBOL(tty_set_operations); int tty_register_driver(struct tty_driver *driver) { int error; - int i; + int i; dev_t dev; void **p = NULL; @@ -3874,8 +3877,8 @@ int tty_register_driver(struct tty_driver *driver) } if (!driver->major) { - error = alloc_chrdev_region(&dev, driver->minor_start, driver->num, - driver->name); + error = alloc_chrdev_region(&dev, driver->minor_start, + driver->num, driver->name); if (!error) { driver->major = MAJOR(dev); driver->minor_start = MINOR(dev); @@ -3892,7 +3895,8 @@ int tty_register_driver(struct tty_driver *driver) if (p) { driver->ttys = (struct tty_struct **)p; driver->termios = (struct ktermios **)(p + driver->num); - driver->termios_locked = (struct ktermios **)(p + driver->num * 2); + driver->termios_locked = (struct ktermios **) + (p + driver->num * 2); } else { driver->ttys = NULL; driver->termios = NULL; @@ -3912,13 +3916,13 @@ int tty_register_driver(struct tty_driver *driver) if (!driver->put_char) driver->put_char = tty_default_put_char; - + mutex_lock(&tty_mutex); list_add(&driver->tty_drivers, &tty_drivers); mutex_unlock(&tty_mutex); - - if ( !(driver->flags & TTY_DRIVER_DYNAMIC_DEV) ) { - for(i = 0; i < driver->num; i++) + + if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) { + for (i = 0; i < driver->num; i++) tty_register_device(driver, i, NULL); } proc_tty_register_driver(driver); @@ -4038,7 +4042,7 @@ void __init console_init(void) (void) tty_register_ldisc(N_TTY, &tty_ldisc_N_TTY); /* - * set up the console device so that later boot sequences can + * set up the console device so that later boot sequences can * inform about problems etc.. */ call = __con_initcall_start; @@ -4048,10 +4052,6 @@ void __init console_init(void) } } -#ifdef CONFIG_VT -extern int vty_init(void); -#endif - static int __init tty_class_init(void) { tty_class = class_create(THIS_MODULE, "tty"); diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index d4b6d64e858..f95a80b2265 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -50,11 +50,11 @@ * Locking: none */ -void tty_wait_until_sent(struct tty_struct * tty, long timeout) +void tty_wait_until_sent(struct tty_struct *tty, long timeout) { #ifdef TTY_DEBUG_WAIT_UNTIL_SENT char buf[64]; - + printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty, buf)); #endif if (!tty->driver->chars_in_buffer) @@ -67,7 +67,6 @@ void tty_wait_until_sent(struct tty_struct * tty, long timeout) if (tty->driver->wait_until_sent) tty->driver->wait_until_sent(tty, timeout); } - EXPORT_SYMBOL(tty_wait_until_sent); static void unset_locked_termios(struct ktermios *termios, @@ -75,8 +74,8 @@ static void unset_locked_termios(struct ktermios *termios, struct ktermios *locked) { int i; - -#define NOSET_MASK(x,y,z) (x = ((x) & ~(z)) | ((y) & (z))) + +#define NOSET_MASK(x, y, z) (x = ((x) & ~(z)) | ((y) & (z))) if (!locked) { printk(KERN_WARNING "Warning?!? termios_locked is NULL.\n"); @@ -88,7 +87,7 @@ static void unset_locked_termios(struct ktermios *termios, NOSET_MASK(termios->c_cflag, old->c_cflag, locked->c_cflag); NOSET_MASK(termios->c_lflag, old->c_lflag, locked->c_lflag); termios->c_line = locked->c_line ? old->c_line : termios->c_line; - for (i=0; i < NCCS; i++) + for (i = 0; i < NCCS; i++) termios->c_cc[i] = locked->c_cc[i] ? old->c_cc[i] : termios->c_cc[i]; /* FIXME: What should we do for i/ospeed */ @@ -163,7 +162,6 @@ speed_t tty_termios_baud_rate(struct ktermios *termios) } return baud_table[cbaud]; } - EXPORT_SYMBOL(tty_termios_baud_rate); /** @@ -203,7 +201,6 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios) return tty_termios_baud_rate(termios); #endif } - EXPORT_SYMBOL(tty_termios_input_baud_rate); /** @@ -338,7 +335,6 @@ speed_t tty_get_baud_rate(struct tty_struct *tty) return baud; } - EXPORT_SYMBOL(tty_get_baud_rate); /** @@ -361,7 +357,6 @@ void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old) new->c_ispeed = old->c_ispeed; new->c_ospeed = old->c_ospeed; } - EXPORT_SYMBOL(tty_termios_copy_hw); /** @@ -395,16 +390,16 @@ EXPORT_SYMBOL(tty_termios_hw_change); * Locking: termios_sem */ -static void change_termios(struct tty_struct * tty, struct ktermios * new_termios) +static void change_termios(struct tty_struct *tty, struct ktermios *new_termios) { int canon_change; struct ktermios old_termios = *tty->termios; struct tty_ldisc *ld; - + /* * Perform the actual termios internal changes under lock. */ - + /* FIXME: we need to decide on some locking/ordering semantics for the set_termios notification eventually */ @@ -419,7 +414,7 @@ static void change_termios(struct tty_struct * tty, struct ktermios * new_termio tty->canon_data = 0; tty->erasing = 0; } - + /* This bit should be in the ldisc code */ if (canon_change && !L_ICANON(tty) && tty->read_cnt) /* Get characters left over from canonical mode. */ @@ -442,7 +437,7 @@ static void change_termios(struct tty_struct * tty, struct ktermios * new_termio wake_up_interruptible(&tty->link->read_wait); } } - + if (tty->driver->set_termios) (*tty->driver->set_termios)(tty, &old_termios); else @@ -470,7 +465,7 @@ static void change_termios(struct tty_struct * tty, struct ktermios * new_termio * Called functions take ldisc and termios_sem locks */ -static int set_termios(struct tty_struct * tty, void __user *arg, int opt) +static int set_termios(struct tty_struct *tty, void __user *arg, int opt) { struct ktermios tmp_termios; struct tty_ldisc *ld; @@ -501,19 +496,19 @@ static int set_termios(struct tty_struct * tty, void __user *arg, int opt) return -EFAULT; #endif - /* If old style Bfoo values are used then load c_ispeed/c_ospeed with the real speed - so its unconditionally usable */ + /* If old style Bfoo values are used then load c_ispeed/c_ospeed + * with the real speed so its unconditionally usable */ tmp_termios.c_ispeed = tty_termios_input_baud_rate(&tmp_termios); tmp_termios.c_ospeed = tty_termios_baud_rate(&tmp_termios); ld = tty_ldisc_ref(tty); - + if (ld != NULL) { if ((opt & TERMIOS_FLUSH) && ld->flush_buffer) ld->flush_buffer(tty); tty_ldisc_deref(ld); } - + if (opt & TERMIOS_WAIT) { tty_wait_until_sent(tty, 0); if (signal_pending(current)) @@ -529,14 +524,14 @@ static int set_termios(struct tty_struct * tty, void __user *arg, int opt) return 0; } -static int get_termio(struct tty_struct * tty, struct termio __user * termio) +static int get_termio(struct tty_struct *tty, struct termio __user *termio) { if (kernel_termios_to_user_termio(termio, tty->termios)) return -EFAULT; return 0; } -static unsigned long inq_canon(struct tty_struct * tty) +static unsigned long inq_canon(struct tty_struct *tty) { int nr, head, tail; @@ -561,7 +556,7 @@ static unsigned long inq_canon(struct tty_struct * tty) * * The "sg_flags" translation is a joke.. */ -static int get_sgflags(struct tty_struct * tty) +static int get_sgflags(struct tty_struct *tty) { int flags = 0; @@ -579,7 +574,7 @@ static int get_sgflags(struct tty_struct * tty) return flags; } -static int get_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb) +static int get_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) { struct sgttyb tmp; @@ -590,11 +585,11 @@ static int get_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb) tmp.sg_kill = tty->termios->c_cc[VKILL]; tmp.sg_flags = get_sgflags(tty); mutex_unlock(&tty->termios_mutex); - + return copy_to_user(sgttyb, &tmp, sizeof(tmp)) ? -EFAULT : 0; } -static void set_sgflags(struct ktermios * termios, int flags) +static void set_sgflags(struct ktermios *termios, int flags) { termios->c_iflag = ICRNL | IXON; termios->c_oflag = 0; @@ -631,7 +626,7 @@ static void set_sgflags(struct ktermios * termios, int flags) * Locking: termios_sem */ -static int set_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb) +static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) { int retval; struct sgttyb tmp; @@ -640,7 +635,7 @@ static int set_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb) retval = tty_check_change(tty); if (retval) return retval; - + if (copy_from_user(&tmp, sgttyb, sizeof(tmp))) return -EFAULT; @@ -651,7 +646,8 @@ static int set_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb) set_sgflags(&termios, tmp.sg_flags); /* Try and encode into Bfoo format */ #ifdef BOTHER - tty_termios_encode_baud_rate(&termios, termios.c_ispeed, termios.c_ospeed); + tty_termios_encode_baud_rate(&termios, termios.c_ispeed, + termios.c_ospeed); #endif mutex_unlock(&tty->termios_mutex); change_termios(tty, &termios); @@ -660,7 +656,7 @@ static int set_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb) #endif #ifdef TIOCGETC -static int get_tchars(struct tty_struct * tty, struct tchars __user * tchars) +static int get_tchars(struct tty_struct *tty, struct tchars __user *tchars) { struct tchars tmp; @@ -673,7 +669,7 @@ static int get_tchars(struct tty_struct * tty, struct tchars __user * tchars) return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0; } -static int set_tchars(struct tty_struct * tty, struct tchars __user * tchars) +static int set_tchars(struct tty_struct *tty, struct tchars __user *tchars) { struct tchars tmp; @@ -690,20 +686,22 @@ static int set_tchars(struct tty_struct * tty, struct tchars __user * tchars) #endif #ifdef TIOCGLTC -static int get_ltchars(struct tty_struct * tty, struct ltchars __user * ltchars) +static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars) { struct ltchars tmp; tmp.t_suspc = tty->termios->c_cc[VSUSP]; - tmp.t_dsuspc = tty->termios->c_cc[VSUSP]; /* what is dsuspc anyway? */ + /* what is dsuspc anyway? */ + tmp.t_dsuspc = tty->termios->c_cc[VSUSP]; tmp.t_rprntc = tty->termios->c_cc[VREPRINT]; - tmp.t_flushc = tty->termios->c_cc[VEOL2]; /* what is flushc anyway? */ + /* what is flushc anyway? */ + tmp.t_flushc = tty->termios->c_cc[VEOL2]; tmp.t_werasc = tty->termios->c_cc[VWERASE]; tmp.t_lnextc = tty->termios->c_cc[VLNEXT]; return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0; } -static int set_ltchars(struct tty_struct * tty, struct ltchars __user * ltchars) +static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars) { struct ltchars tmp; @@ -711,9 +709,11 @@ static int set_ltchars(struct tty_struct * tty, struct ltchars __user * ltchars) return -EFAULT; tty->termios->c_cc[VSUSP] = tmp.t_suspc; - tty->termios->c_cc[VEOL2] = tmp.t_dsuspc; /* what is dsuspc anyway? */ + /* what is dsuspc anyway? */ + tty->termios->c_cc[VEOL2] = tmp.t_dsuspc; tty->termios->c_cc[VREPRINT] = tmp.t_rprntc; - tty->termios->c_cc[VEOL2] = tmp.t_flushc; /* what is flushc anyway? */ + /* what is flushc anyway? */ + tty->termios->c_cc[VEOL2] = tmp.t_flushc; tty->termios->c_cc[VWERASE] = tmp.t_werasc; tty->termios->c_cc[VLNEXT] = tmp.t_lnextc; return 0; @@ -761,10 +761,10 @@ static int send_prio_char(struct tty_struct *tty, char ch) * consistent mode setting. */ -int tty_mode_ioctl(struct tty_struct * tty, struct file *file, +int tty_mode_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct tty_struct * real_tty; + struct tty_struct *real_tty; void __user *p = (void __user *)arg; if (tty->driver->type == TTY_DRIVER_TYPE_PTY && @@ -775,100 +775,100 @@ int tty_mode_ioctl(struct tty_struct * tty, struct file *file, switch (cmd) { #ifdef TIOCGETP - case TIOCGETP: - return get_sgttyb(real_tty, (struct sgttyb __user *) arg); - case TIOCSETP: - case TIOCSETN: - return set_sgttyb(real_tty, (struct sgttyb __user *) arg); + case TIOCGETP: + return get_sgttyb(real_tty, (struct sgttyb __user *) arg); + case TIOCSETP: + case TIOCSETN: + return set_sgttyb(real_tty, (struct sgttyb __user *) arg); #endif #ifdef TIOCGETC - case TIOCGETC: - return get_tchars(real_tty, p); - case TIOCSETC: - return set_tchars(real_tty, p); + case TIOCGETC: + return get_tchars(real_tty, p); + case TIOCSETC: + return set_tchars(real_tty, p); #endif #ifdef TIOCGLTC - case TIOCGLTC: - return get_ltchars(real_tty, p); - case TIOCSLTC: - return set_ltchars(real_tty, p); + case TIOCGLTC: + return get_ltchars(real_tty, p); + case TIOCSLTC: + return set_ltchars(real_tty, p); #endif - case TCSETSF: - return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_OLD); - case TCSETSW: - return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_OLD); - case TCSETS: - return set_termios(real_tty, p, TERMIOS_OLD); + case TCSETSF: + return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_OLD); + case TCSETSW: + return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_OLD); + case TCSETS: + return set_termios(real_tty, p, TERMIOS_OLD); #ifndef TCGETS2 - case TCGETS: - if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios)) - return -EFAULT; - return 0; + case TCGETS: + if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios)) + return -EFAULT; + return 0; #else - case TCGETS: - if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios)) - return -EFAULT; - return 0; - case TCGETS2: - if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios)) - return -EFAULT; - return 0; - case TCSETSF2: - return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT); - case TCSETSW2: - return set_termios(real_tty, p, TERMIOS_WAIT); - case TCSETS2: - return set_termios(real_tty, p, 0); + case TCGETS: + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios)) + return -EFAULT; + return 0; + case TCGETS2: + if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios)) + return -EFAULT; + return 0; + case TCSETSF2: + return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT); + case TCSETSW2: + return set_termios(real_tty, p, TERMIOS_WAIT); + case TCSETS2: + return set_termios(real_tty, p, 0); #endif - case TCGETA: - return get_termio(real_tty, p); - case TCSETAF: - return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_TERMIO); - case TCSETAW: - return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_TERMIO); - case TCSETA: - return set_termios(real_tty, p, TERMIOS_TERMIO); + case TCGETA: + return get_termio(real_tty, p); + case TCSETAF: + return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_TERMIO); + case TCSETAW: + return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_TERMIO); + case TCSETA: + return set_termios(real_tty, p, TERMIOS_TERMIO); #ifndef TCGETS2 - case TIOCGLCKTRMIOS: - if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked)) - return -EFAULT; - return 0; - - case TIOCSLCKTRMIOS: - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - if (user_termios_to_kernel_termios(real_tty->termios_locked, (struct termios __user *) arg)) - return -EFAULT; - return 0; + case TIOCGLCKTRMIOS: + if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked)) + return -EFAULT; + return 0; + case TIOCSLCKTRMIOS: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (user_termios_to_kernel_termios(real_tty->termios_locked, + (struct termios __user *) arg)) + return -EFAULT; + return 0; #else - case TIOCGLCKTRMIOS: - if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked)) - return -EFAULT; - return 0; - - case TIOCSLCKTRMIOS: - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - if (user_termios_to_kernel_termios_1(real_tty->termios_locked, (struct termios __user *) arg)) - return -EFAULT; + case TIOCGLCKTRMIOS: + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked)) + return -EFAULT; + return 0; + case TIOCSLCKTRMIOS: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (user_termios_to_kernel_termios_1(real_tty->termios_locked, + (struct termios __user *) arg)) + return -EFAULT; return 0; #endif - case TIOCGSOFTCAR: - return put_user(C_CLOCAL(tty) ? 1 : 0, (int __user *)arg); - case TIOCSSOFTCAR: - if (get_user(arg, (unsigned int __user *) arg)) - return -EFAULT; - mutex_lock(&tty->termios_mutex); - tty->termios->c_cflag = - ((tty->termios->c_cflag & ~CLOCAL) | - (arg ? CLOCAL : 0)); - mutex_unlock(&tty->termios_mutex); - return 0; - default: - return -ENOIOCTLCMD; + case TIOCGSOFTCAR: + return put_user(C_CLOCAL(tty) ? 1 : 0, + (int __user *)arg); + case TIOCSSOFTCAR: + if (get_user(arg, (unsigned int __user *) arg)) + return -EFAULT; + mutex_lock(&tty->termios_mutex); + tty->termios->c_cflag = + ((tty->termios->c_cflag & ~CLOCAL) | + (arg ? CLOCAL : 0)); + mutex_unlock(&tty->termios_mutex); + return 0; + default: + return -ENOIOCTLCMD; } } - EXPORT_SYMBOL_GPL(tty_mode_ioctl); int tty_perform_flush(struct tty_struct *tty, unsigned long arg) @@ -899,13 +899,12 @@ int tty_perform_flush(struct tty_struct *tty, unsigned long arg) tty_ldisc_deref(ld); return 0; } - EXPORT_SYMBOL_GPL(tty_perform_flush); -int n_tty_ioctl(struct tty_struct * tty, struct file * file, +int n_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct tty_struct * real_tty; + struct tty_struct *real_tty; int retval; if (tty->driver->type == TTY_DRIVER_TYPE_PTY && @@ -915,68 +914,67 @@ int n_tty_ioctl(struct tty_struct * tty, struct file * file, real_tty = tty; switch (cmd) { - case TCXONC: - retval = tty_check_change(tty); - if (retval) - return retval; - switch (arg) { - case TCOOFF: - if (!tty->flow_stopped) { - tty->flow_stopped = 1; - stop_tty(tty); - } - break; - case TCOON: - if (tty->flow_stopped) { - tty->flow_stopped = 0; - start_tty(tty); - } - break; - case TCIOFF: - if (STOP_CHAR(tty) != __DISABLED_CHAR) - return send_prio_char(tty, STOP_CHAR(tty)); - break; - case TCION: - if (START_CHAR(tty) != __DISABLED_CHAR) - return send_prio_char(tty, START_CHAR(tty)); - break; - default: - return -EINVAL; + case TCXONC: + retval = tty_check_change(tty); + if (retval) + return retval; + switch (arg) { + case TCOOFF: + if (!tty->flow_stopped) { + tty->flow_stopped = 1; + stop_tty(tty); } - return 0; - case TCFLSH: - return tty_perform_flush(tty, arg); - case TIOCOUTQ: - return put_user(tty->driver->chars_in_buffer ? - tty->driver->chars_in_buffer(tty) : 0, - (int __user *) arg); - case TIOCINQ: - retval = tty->read_cnt; - if (L_ICANON(tty)) - retval = inq_canon(tty); - return put_user(retval, (unsigned int __user *) arg); - case TIOCPKT: - { - int pktmode; - - if (tty->driver->type != TTY_DRIVER_TYPE_PTY || - tty->driver->subtype != PTY_TYPE_MASTER) - return -ENOTTY; - if (get_user(pktmode, (int __user *) arg)) - return -EFAULT; - if (pktmode) { - if (!tty->packet) { - tty->packet = 1; - tty->link->ctrl_status = 0; - } - } else - tty->packet = 0; - return 0; - } + break; + case TCOON: + if (tty->flow_stopped) { + tty->flow_stopped = 0; + start_tty(tty); + } + break; + case TCIOFF: + if (STOP_CHAR(tty) != __DISABLED_CHAR) + return send_prio_char(tty, STOP_CHAR(tty)); + break; + case TCION: + if (START_CHAR(tty) != __DISABLED_CHAR) + return send_prio_char(tty, START_CHAR(tty)); + break; default: - /* Try the mode commands */ - return tty_mode_ioctl(tty, file, cmd, arg); + return -EINVAL; } + return 0; + case TCFLSH: + return tty_perform_flush(tty, arg); + case TIOCOUTQ: + return put_user(tty->driver->chars_in_buffer ? + tty->driver->chars_in_buffer(tty) : 0, + (int __user *) arg); + case TIOCINQ: + retval = tty->read_cnt; + if (L_ICANON(tty)) + retval = inq_canon(tty); + return put_user(retval, (unsigned int __user *) arg); + case TIOCPKT: + { + int pktmode; + + if (tty->driver->type != TTY_DRIVER_TYPE_PTY || + tty->driver->subtype != PTY_TYPE_MASTER) + return -ENOTTY; + if (get_user(pktmode, (int __user *) arg)) + return -EFAULT; + if (pktmode) { + if (!tty->packet) { + tty->packet = 1; + tty->link->ctrl_status = 0; + } + } else + tty->packet = 0; + return 0; + } + default: + /* Try the mode commands */ + return tty_mode_ioctl(tty, file, cmd, arg); + } } - EXPORT_SYMBOL(n_tty_ioctl); diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 7a5badfb7d8..367be917506 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -2400,13 +2400,15 @@ static void vt_console_print(struct console *co, const char *b, unsigned count) { struct vc_data *vc = vc_cons[fg_console].d; unsigned char c; - static unsigned long printing; + static DEFINE_SPINLOCK(printing_lock); const ushort *start; ushort cnt = 0; ushort myx; /* console busy or not yet initialized */ - if (!printable || test_and_set_bit(0, &printing)) + if (!printable) + return; + if (!spin_trylock(&printing_lock)) return; if (kmsg_redirect && vc_cons_allocated(kmsg_redirect - 1)) @@ -2481,7 +2483,7 @@ static void vt_console_print(struct console *co, const char *b, unsigned count) notify_update(vc); quit: - clear_bit(0, &printing); + spin_unlock(&printing_lock); } static struct tty_driver *vt_console_device(struct console *c, int *index) diff --git a/drivers/char/xilinx_hwicap/Makefile b/drivers/char/xilinx_hwicap/Makefile new file mode 100644 index 00000000000..5491cbc42f4 --- /dev/null +++ b/drivers/char/xilinx_hwicap/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the Xilinx OPB hwicap driver +# + +obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap_m.o + +xilinx_hwicap_m-y := xilinx_hwicap.o fifo_icap.o buffer_icap.o diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c new file mode 100644 index 00000000000..dfea2bde162 --- /dev/null +++ b/drivers/char/xilinx_hwicap/buffer_icap.c @@ -0,0 +1,380 @@ +/***************************************************************************** + * + * Author: Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" + * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND + * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, + * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, + * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION + * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, + * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE + * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY + * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE + * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR + * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF + * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE. + * + * Xilinx products are not intended for use in life support appliances, + * devices, or systems. Use in such applications is expressly prohibited. + * + * (c) Copyright 2003-2008 Xilinx Inc. + * All rights reserved. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + *****************************************************************************/ + +#include "buffer_icap.h" + +/* Indicates how many bytes will fit in a buffer. (1 BRAM) */ +#define XHI_MAX_BUFFER_BYTES 2048 +#define XHI_MAX_BUFFER_INTS (XHI_MAX_BUFFER_BYTES >> 2) + +/* File access and error constants */ +#define XHI_DEVICE_READ_ERROR -1 +#define XHI_DEVICE_WRITE_ERROR -2 +#define XHI_BUFFER_OVERFLOW_ERROR -3 + +#define XHI_DEVICE_READ 0x1 +#define XHI_DEVICE_WRITE 0x0 + +/* Constants for checking transfer status */ +#define XHI_CYCLE_DONE 0 +#define XHI_CYCLE_EXECUTING 1 + +/* buffer_icap register offsets */ + +/* Size of transfer, read & write */ +#define XHI_SIZE_REG_OFFSET 0x800L +/* offset into bram, read & write */ +#define XHI_BRAM_OFFSET_REG_OFFSET 0x804L +/* Read not Configure, direction of transfer. Write only */ +#define XHI_RNC_REG_OFFSET 0x808L +/* Indicates transfer complete. Read only */ +#define XHI_STATUS_REG_OFFSET 0x80CL + +/* Constants for setting the RNC register */ +#define XHI_CONFIGURE 0x0UL +#define XHI_READBACK 0x1UL + +/* Constants for the Done register */ +#define XHI_NOT_FINISHED 0x0UL +#define XHI_FINISHED 0x1UL + +#define XHI_BUFFER_START 0 + +/** + * buffer_icap_get_status: Get the contents of the status register. + * @parameter base_address: is the base address of the device + * + * The status register contains the ICAP status and the done bit. + * + * D8 - cfgerr + * D7 - dalign + * D6 - rip + * D5 - in_abort_l + * D4 - Always 1 + * D3 - Always 1 + * D2 - Always 1 + * D1 - Always 1 + * D0 - Done bit + **/ +static inline u32 buffer_icap_get_status(void __iomem *base_address) +{ + return in_be32(base_address + XHI_STATUS_REG_OFFSET); +} + +/** + * buffer_icap_get_bram: Reads data from the storage buffer bram. + * @parameter base_address: contains the base address of the component. + * @parameter offset: The word offset from which the data should be read. + * + * A bram is used as a configuration memory cache. One frame of data can + * be stored in this "storage buffer". + **/ +static inline u32 buffer_icap_get_bram(void __iomem *base_address, + u32 offset) +{ + return in_be32(base_address + (offset << 2)); +} + +/** + * buffer_icap_busy: Return true if the icap device is busy + * @parameter base_address: is the base address of the device + * + * The queries the low order bit of the status register, which + * indicates whether the current configuration or readback operation + * has completed. + **/ +static inline bool buffer_icap_busy(void __iomem *base_address) +{ + return (buffer_icap_get_status(base_address) & 1) == XHI_NOT_FINISHED; +} + +/** + * buffer_icap_busy: Return true if the icap device is not busy + * @parameter base_address: is the base address of the device + * + * The queries the low order bit of the status register, which + * indicates whether the current configuration or readback operation + * has completed. + **/ +static inline bool buffer_icap_done(void __iomem *base_address) +{ + return (buffer_icap_get_status(base_address) & 1) == XHI_FINISHED; +} + +/** + * buffer_icap_set_size: Set the size register. + * @parameter base_address: is the base address of the device + * @parameter data: The size in bytes. + * + * The size register holds the number of 8 bit bytes to transfer between + * bram and the icap (or icap to bram). + **/ +static inline void buffer_icap_set_size(void __iomem *base_address, + u32 data) +{ + out_be32(base_address + XHI_SIZE_REG_OFFSET, data); +} + +/** + * buffer_icap_mSetoffsetReg: Set the bram offset register. + * @parameter base_address: contains the base address of the device. + * @parameter data: is the value to be written to the data register. + * + * The bram offset register holds the starting bram address to transfer + * data from during configuration or write data to during readback. + **/ +static inline void buffer_icap_set_offset(void __iomem *base_address, + u32 data) +{ + out_be32(base_address + XHI_BRAM_OFFSET_REG_OFFSET, data); +} + +/** + * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register. + * @parameter base_address: contains the base address of the device. + * @parameter data: is the value to be written to the data register. + * + * The RNC register determines the direction of the data transfer. It + * controls whether a configuration or readback take place. Writing to + * this register initiates the transfer. A value of 1 initiates a + * readback while writing a value of 0 initiates a configuration. + **/ +static inline void buffer_icap_set_rnc(void __iomem *base_address, + u32 data) +{ + out_be32(base_address + XHI_RNC_REG_OFFSET, data); +} + +/** + * buffer_icap_set_bram: Write data to the storage buffer bram. + * @parameter base_address: contains the base address of the component. + * @parameter offset: The word offset at which the data should be written. + * @parameter data: The value to be written to the bram offset. + * + * A bram is used as a configuration memory cache. One frame of data can + * be stored in this "storage buffer". + **/ +static inline void buffer_icap_set_bram(void __iomem *base_address, + u32 offset, u32 data) +{ + out_be32(base_address + (offset << 2), data); +} + +/** + * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer. + * @parameter drvdata: a pointer to the drvdata. + * @parameter offset: The storage buffer start address. + * @parameter count: The number of words (32 bit) to read from the + * device (ICAP). + **/ +static int buffer_icap_device_read(struct hwicap_drvdata *drvdata, + u32 offset, u32 count) +{ + + s32 retries = 0; + void __iomem *base_address = drvdata->base_address; + + if (buffer_icap_busy(base_address)) + return -EBUSY; + + if ((offset + count) > XHI_MAX_BUFFER_INTS) + return -EINVAL; + + /* setSize count*4 to get bytes. */ + buffer_icap_set_size(base_address, (count << 2)); + buffer_icap_set_offset(base_address, offset); + buffer_icap_set_rnc(base_address, XHI_READBACK); + + while (buffer_icap_busy(base_address)) { + retries++; + if (retries > XHI_MAX_RETRIES) + return -EBUSY; + } + return 0; + +}; + +/** + * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer. + * @parameter drvdata: a pointer to the drvdata. + * @parameter offset: The storage buffer start address. + * @parameter count: The number of words (32 bit) to read from the + * device (ICAP). + **/ +static int buffer_icap_device_write(struct hwicap_drvdata *drvdata, + u32 offset, u32 count) +{ + + s32 retries = 0; + void __iomem *base_address = drvdata->base_address; + + if (buffer_icap_busy(base_address)) + return -EBUSY; + + if ((offset + count) > XHI_MAX_BUFFER_INTS) + return -EINVAL; + + /* setSize count*4 to get bytes. */ + buffer_icap_set_size(base_address, count << 2); + buffer_icap_set_offset(base_address, offset); + buffer_icap_set_rnc(base_address, XHI_CONFIGURE); + + while (buffer_icap_busy(base_address)) { + retries++; + if (retries > XHI_MAX_RETRIES) + return -EBUSY; + } + return 0; + +}; + +/** + * buffer_icap_reset: Reset the logic of the icap device. + * @parameter drvdata: a pointer to the drvdata. + * + * Writing to the status register resets the ICAP logic in an internal + * version of the core. For the version of the core published in EDK, + * this is a noop. + **/ +void buffer_icap_reset(struct hwicap_drvdata *drvdata) +{ + out_be32(drvdata->base_address + XHI_STATUS_REG_OFFSET, 0xFEFE); +} + +/** + * buffer_icap_set_configuration: Load a partial bitstream from system memory. + * @parameter drvdata: a pointer to the drvdata. + * @parameter data: Kernel address of the partial bitstream. + * @parameter size: the size of the partial bitstream in 32 bit words. + **/ +int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data, + u32 size) +{ + int status; + s32 buffer_count = 0; + s32 num_writes = 0; + bool dirty = 0; + u32 i; + void __iomem *base_address = drvdata->base_address; + + /* Loop through all the data */ + for (i = 0, buffer_count = 0; i < size; i++) { + + /* Copy data to bram */ + buffer_icap_set_bram(base_address, buffer_count, data[i]); + dirty = 1; + + if (buffer_count < XHI_MAX_BUFFER_INTS - 1) { + buffer_count++; + continue; + } + + /* Write data to ICAP */ + status = buffer_icap_device_write( + drvdata, + XHI_BUFFER_START, + XHI_MAX_BUFFER_INTS); + if (status != 0) { + /* abort. */ + buffer_icap_reset(drvdata); + return status; + } + + buffer_count = 0; + num_writes++; + dirty = 0; + } + + /* Write unwritten data to ICAP */ + if (dirty) { + /* Write data to ICAP */ + status = buffer_icap_device_write(drvdata, XHI_BUFFER_START, + buffer_count); + if (status != 0) { + /* abort. */ + buffer_icap_reset(drvdata); + } + return status; + } + + return 0; +}; + +/** + * buffer_icap_get_configuration: Read configuration data from the device. + * @parameter drvdata: a pointer to the drvdata. + * @parameter data: Address of the data representing the partial bitstream + * @parameter size: the size of the partial bitstream in 32 bit words. + **/ +int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data, + u32 size) +{ + int status; + s32 buffer_count = 0; + s32 read_count = 0; + u32 i; + void __iomem *base_address = drvdata->base_address; + + /* Loop through all the data */ + for (i = 0, buffer_count = XHI_MAX_BUFFER_INTS; i < size; i++) { + if (buffer_count == XHI_MAX_BUFFER_INTS) { + u32 words_remaining = size - i; + u32 words_to_read = + words_remaining < + XHI_MAX_BUFFER_INTS ? words_remaining : + XHI_MAX_BUFFER_INTS; + + /* Read data from ICAP */ + status = buffer_icap_device_read( + drvdata, + XHI_BUFFER_START, + words_to_read); + if (status != 0) { + /* abort. */ + buffer_icap_reset(drvdata); + return status; + } + + buffer_count = 0; + read_count++; + } + + /* Copy data from bram */ + data[i] = buffer_icap_get_bram(base_address, buffer_count); + buffer_count++; + } + + return 0; +}; diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h new file mode 100644 index 00000000000..03184959fa0 --- /dev/null +++ b/drivers/char/xilinx_hwicap/buffer_icap.h @@ -0,0 +1,57 @@ +/***************************************************************************** + * + * Author: Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" + * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND + * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, + * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, + * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION + * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, + * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE + * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY + * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE + * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR + * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF + * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE. + * + * Xilinx products are not intended for use in life support appliances, + * devices, or systems. Use in such applications is expressly prohibited. + * + * (c) Copyright 2003-2008 Xilinx Inc. + * All rights reserved. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + *****************************************************************************/ + +#ifndef XILINX_BUFFER_ICAP_H_ /* prevent circular inclusions */ +#define XILINX_BUFFER_ICAP_H_ /* by using protection macros */ + +#include <linux/types.h> +#include <linux/cdev.h> +#include <linux/version.h> +#include <linux/platform_device.h> + +#include <asm/io.h> +#include "xilinx_hwicap.h" + +void buffer_icap_reset(struct hwicap_drvdata *drvdata); + +/* Loads a partial bitstream from system memory. */ +int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data, + u32 Size); + +/* Loads a partial bitstream from system memory. */ +int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data, + u32 Size); + +#endif diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c new file mode 100644 index 00000000000..0988314694a --- /dev/null +++ b/drivers/char/xilinx_hwicap/fifo_icap.c @@ -0,0 +1,381 @@ +/***************************************************************************** + * + * Author: Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" + * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND + * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, + * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, + * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION + * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, + * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE + * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY + * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE + * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR + * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF + * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE. + * + * Xilinx products are not intended for use in life support appliances, + * devices, or systems. Use in such applications is expressly prohibited. + * + * (c) Copyright 2007-2008 Xilinx Inc. + * All rights reserved. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + *****************************************************************************/ + +#include "fifo_icap.h" + +/* Register offsets for the XHwIcap device. */ +#define XHI_GIER_OFFSET 0x1C /* Device Global Interrupt Enable Reg */ +#define XHI_IPISR_OFFSET 0x20 /* Interrupt Status Register */ +#define XHI_IPIER_OFFSET 0x28 /* Interrupt Enable Register */ +#define XHI_WF_OFFSET 0x100 /* Write FIFO */ +#define XHI_RF_OFFSET 0x104 /* Read FIFO */ +#define XHI_SZ_OFFSET 0x108 /* Size Register */ +#define XHI_CR_OFFSET 0x10C /* Control Register */ +#define XHI_SR_OFFSET 0x110 /* Status Register */ +#define XHI_WFV_OFFSET 0x114 /* Write FIFO Vacancy Register */ +#define XHI_RFO_OFFSET 0x118 /* Read FIFO Occupancy Register */ + +/* Device Global Interrupt Enable Register (GIER) bit definitions */ + +#define XHI_GIER_GIE_MASK 0x80000000 /* Global Interrupt enable Mask */ + +/** + * HwIcap Device Interrupt Status/Enable Registers + * + * Interrupt Status Register (IPISR) : This register holds the + * interrupt status flags for the device. These bits are toggle on + * write. + * + * Interrupt Enable Register (IPIER) : This register is used to enable + * interrupt sources for the device. + * Writing a '1' to a bit enables the corresponding interrupt. + * Writing a '0' to a bit disables the corresponding interrupt. + * + * IPISR/IPIER registers have the same bit definitions and are only defined + * once. + */ +#define XHI_IPIXR_RFULL_MASK 0x00000008 /* Read FIFO Full */ +#define XHI_IPIXR_WEMPTY_MASK 0x00000004 /* Write FIFO Empty */ +#define XHI_IPIXR_RDP_MASK 0x00000002 /* Read FIFO half full */ +#define XHI_IPIXR_WRP_MASK 0x00000001 /* Write FIFO half full */ +#define XHI_IPIXR_ALL_MASK 0x0000000F /* Mask of all interrupts */ + +/* Control Register (CR) */ +#define XHI_CR_SW_RESET_MASK 0x00000008 /* SW Reset Mask */ +#define XHI_CR_FIFO_CLR_MASK 0x00000004 /* FIFO Clear Mask */ +#define XHI_CR_READ_MASK 0x00000002 /* Read from ICAP to FIFO */ +#define XHI_CR_WRITE_MASK 0x00000001 /* Write from FIFO to ICAP */ + +/* Status Register (SR) */ +#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */ +#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */ +#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */ +#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */ +#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask */ + + +#define XHI_WFO_MAX_VACANCY 1024 /* Max Write FIFO Vacancy, in words */ +#define XHI_RFO_MAX_OCCUPANCY 256 /* Max Read FIFO Occupancy, in words */ +/* The maximum amount we can request from fifo_icap_get_configuration + at once, in bytes. */ +#define XHI_MAX_READ_TRANSACTION_WORDS 0xFFF + + +/** + * fifo_icap_fifo_write: Write data to the write FIFO. + * @parameter drvdata: a pointer to the drvdata. + * @parameter data: the 32-bit value to be written to the FIFO. + * + * This function will silently fail if the fifo is full. + **/ +static inline void fifo_icap_fifo_write(struct hwicap_drvdata *drvdata, + u32 data) +{ + dev_dbg(drvdata->dev, "fifo_write: %x\n", data); + out_be32(drvdata->base_address + XHI_WF_OFFSET, data); +} + +/** + * fifo_icap_fifo_read: Read data from the Read FIFO. + * @parameter drvdata: a pointer to the drvdata. + * + * This function will silently fail if the fifo is empty. + **/ +static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata) +{ + u32 data = in_be32(drvdata->base_address + XHI_RF_OFFSET); + dev_dbg(drvdata->dev, "fifo_read: %x\n", data); + return data; +} + +/** + * fifo_icap_set_read_size: Set the the size register. + * @parameter drvdata: a pointer to the drvdata. + * @parameter data: the size of the following read transaction, in words. + **/ +static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata, + u32 data) +{ + out_be32(drvdata->base_address + XHI_SZ_OFFSET, data); +} + +/** + * fifo_icap_start_config: Initiate a configuration (write) to the device. + * @parameter drvdata: a pointer to the drvdata. + **/ +static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata) +{ + out_be32(drvdata->base_address + XHI_CR_OFFSET, XHI_CR_WRITE_MASK); + dev_dbg(drvdata->dev, "configuration started\n"); +} + +/** + * fifo_icap_start_readback: Initiate a readback from the device. + * @parameter drvdata: a pointer to the drvdata. + **/ +static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata) +{ + out_be32(drvdata->base_address + XHI_CR_OFFSET, XHI_CR_READ_MASK); + dev_dbg(drvdata->dev, "readback started\n"); +} + +/** + * fifo_icap_busy: Return true if the ICAP is still processing a transaction. + * @parameter drvdata: a pointer to the drvdata. + **/ +static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata) +{ + u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET); + dev_dbg(drvdata->dev, "Getting status = %x\n", status); + return (status & XHI_SR_DONE_MASK) ? 0 : 1; +} + +/** + * fifo_icap_write_fifo_vacancy: Query the write fifo available space. + * @parameter drvdata: a pointer to the drvdata. + * + * Return the number of words that can be safely pushed into the write fifo. + **/ +static inline u32 fifo_icap_write_fifo_vacancy( + struct hwicap_drvdata *drvdata) +{ + return in_be32(drvdata->base_address + XHI_WFV_OFFSET); +} + +/** + * fifo_icap_read_fifo_occupancy: Query the read fifo available data. + * @parameter drvdata: a pointer to the drvdata. + * + * Return the number of words that can be safely read from the read fifo. + **/ +static inline u32 fifo_icap_read_fifo_occupancy( + struct hwicap_drvdata *drvdata) +{ + return in_be32(drvdata->base_address + XHI_RFO_OFFSET); +} + +/** + * fifo_icap_set_configuration: Send configuration data to the ICAP. + * @parameter drvdata: a pointer to the drvdata. + * @parameter frame_buffer: a pointer to the data to be written to the + * ICAP device. + * @parameter num_words: the number of words (32 bit) to write to the ICAP + * device. + + * This function writes the given user data to the Write FIFO in + * polled mode and starts the transfer of the data to + * the ICAP device. + **/ +int fifo_icap_set_configuration(struct hwicap_drvdata *drvdata, + u32 *frame_buffer, u32 num_words) +{ + + u32 write_fifo_vacancy = 0; + u32 retries = 0; + u32 remaining_words; + + dev_dbg(drvdata->dev, "fifo_set_configuration\n"); + + /* + * Check if the ICAP device is Busy with the last Read/Write + */ + if (fifo_icap_busy(drvdata)) + return -EBUSY; + + /* + * Set up the buffer pointer and the words to be transferred. + */ + remaining_words = num_words; + + while (remaining_words > 0) { + /* + * Wait until we have some data in the fifo. + */ + while (write_fifo_vacancy == 0) { + write_fifo_vacancy = + fifo_icap_write_fifo_vacancy(drvdata); + retries++; + if (retries > XHI_MAX_RETRIES) + return -EIO; + } + + /* + * Write data into the Write FIFO. + */ + while ((write_fifo_vacancy != 0) && + (remaining_words > 0)) { + fifo_icap_fifo_write(drvdata, *frame_buffer); + + remaining_words--; + write_fifo_vacancy--; + frame_buffer++; + } + /* Start pushing whatever is in the FIFO into the ICAP. */ + fifo_icap_start_config(drvdata); + } + + /* Wait until the write has finished. */ + while (fifo_icap_busy(drvdata)) { + retries++; + if (retries > XHI_MAX_RETRIES) + break; + } + + dev_dbg(drvdata->dev, "done fifo_set_configuration\n"); + + /* + * If the requested number of words have not been read from + * the device then indicate failure. + */ + if (remaining_words != 0) + return -EIO; + + return 0; +} + +/** + * fifo_icap_get_configuration: Read configuration data from the device. + * @parameter drvdata: a pointer to the drvdata. + * @parameter data: Address of the data representing the partial bitstream + * @parameter size: the size of the partial bitstream in 32 bit words. + * + * This function reads the specified number of words from the ICAP device in + * the polled mode. + */ +int fifo_icap_get_configuration(struct hwicap_drvdata *drvdata, + u32 *frame_buffer, u32 num_words) +{ + + u32 read_fifo_occupancy = 0; + u32 retries = 0; + u32 *data = frame_buffer; + u32 remaining_words; + u32 words_to_read; + + dev_dbg(drvdata->dev, "fifo_get_configuration\n"); + + /* + * Check if the ICAP device is Busy with the last Write/Read + */ + if (fifo_icap_busy(drvdata)) + return -EBUSY; + + remaining_words = num_words; + + while (remaining_words > 0) { + words_to_read = remaining_words; + /* The hardware has a limit on the number of words + that can be read at one time. */ + if (words_to_read > XHI_MAX_READ_TRANSACTION_WORDS) + words_to_read = XHI_MAX_READ_TRANSACTION_WORDS; + + remaining_words -= words_to_read; + + fifo_icap_set_read_size(drvdata, words_to_read); + fifo_icap_start_readback(drvdata); + + while (words_to_read > 0) { + /* Wait until we have some data in the fifo. */ + while (read_fifo_occupancy == 0) { + read_fifo_occupancy = + fifo_icap_read_fifo_occupancy(drvdata); + retries++; + if (retries > XHI_MAX_RETRIES) + return -EIO; + } + + if (read_fifo_occupancy > words_to_read) + read_fifo_occupancy = words_to_read; + + words_to_read -= read_fifo_occupancy; + + /* Read the data from the Read FIFO. */ + while (read_fifo_occupancy != 0) { + *data++ = fifo_icap_fifo_read(drvdata); + read_fifo_occupancy--; + } + } + } + + dev_dbg(drvdata->dev, "done fifo_get_configuration\n"); + + return 0; +} + +/** + * buffer_icap_reset: Reset the logic of the icap device. + * @parameter drvdata: a pointer to the drvdata. + * + * This function forces the software reset of the complete HWICAP device. + * All the registers will return to the default value and the FIFO is also + * flushed as a part of this software reset. + */ +void fifo_icap_reset(struct hwicap_drvdata *drvdata) +{ + u32 reg_data; + /* + * Reset the device by setting/clearing the RESET bit in the + * Control Register. + */ + reg_data = in_be32(drvdata->base_address + XHI_CR_OFFSET); + + out_be32(drvdata->base_address + XHI_CR_OFFSET, + reg_data | XHI_CR_SW_RESET_MASK); + + out_be32(drvdata->base_address + XHI_CR_OFFSET, + reg_data & (~XHI_CR_SW_RESET_MASK)); + +} + +/** + * fifo_icap_flush_fifo: This function flushes the FIFOs in the device. + * @parameter drvdata: a pointer to the drvdata. + */ +void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata) +{ + u32 reg_data; + /* + * Flush the FIFO by setting/clearing the FIFO Clear bit in the + * Control Register. + */ + reg_data = in_be32(drvdata->base_address + XHI_CR_OFFSET); + + out_be32(drvdata->base_address + XHI_CR_OFFSET, + reg_data | XHI_CR_FIFO_CLR_MASK); + + out_be32(drvdata->base_address + XHI_CR_OFFSET, + reg_data & (~XHI_CR_FIFO_CLR_MASK)); +} + diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h new file mode 100644 index 00000000000..4d3068dd040 --- /dev/null +++ b/drivers/char/xilinx_hwicap/fifo_icap.h @@ -0,0 +1,62 @@ +/***************************************************************************** + * + * Author: Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" + * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND + * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, + * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, + * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION + * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, + * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE + * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY + * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE + * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR + * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF + * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE. + * + * Xilinx products are not intended for use in life support appliances, + * devices, or systems. Use in such applications is expressly prohibited. + * + * (c) Copyright 2007-2008 Xilinx Inc. + * All rights reserved. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + *****************************************************************************/ + +#ifndef XILINX_FIFO_ICAP_H_ /* prevent circular inclusions */ +#define XILINX_FIFO_ICAP_H_ /* by using protection macros */ + +#include <linux/types.h> +#include <linux/cdev.h> +#include <linux/version.h> +#include <linux/platform_device.h> + +#include <asm/io.h> +#include "xilinx_hwicap.h" + +/* Reads integers from the device into the storage buffer. */ +int fifo_icap_get_configuration( + struct hwicap_drvdata *drvdata, + u32 *FrameBuffer, + u32 NumWords); + +/* Writes integers to the device from the storage buffer. */ +int fifo_icap_set_configuration( + struct hwicap_drvdata *drvdata, + u32 *FrameBuffer, + u32 NumWords); + +void fifo_icap_reset(struct hwicap_drvdata *drvdata); +void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata); + +#endif diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c new file mode 100644 index 00000000000..24f6aef0fd3 --- /dev/null +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -0,0 +1,904 @@ +/***************************************************************************** + * + * Author: Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" + * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND + * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, + * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, + * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION + * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, + * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE + * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY + * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE + * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR + * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF + * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE. + * + * Xilinx products are not intended for use in life support appliances, + * devices, or systems. Use in such applications is expressly prohibited. + * + * (c) Copyright 2002 Xilinx Inc., Systems Engineering Group + * (c) Copyright 2004 Xilinx Inc., Systems Engineering Group + * (c) Copyright 2007-2008 Xilinx Inc. + * All rights reserved. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + *****************************************************************************/ + +/* + * This is the code behind /dev/xilinx_icap -- it allows a user-space + * application to use the Xilinx ICAP subsystem. + * + * The following operations are possible: + * + * open open the port and initialize for access. + * release release port + * write Write a bitstream to the configuration processor. + * read Read a data stream from the configuration processor. + * + * After being opened, the port is initialized and accessed to avoid a + * corrupted first read which may occur with some hardware. The port + * is left in a desynched state, requiring that a synch sequence be + * transmitted before any valid configuration data. A user will have + * exclusive access to the device while it remains open, and the state + * of the ICAP cannot be guaranteed after the device is closed. Note + * that a complete reset of the core and the state of the ICAP cannot + * be performed on many versions of the cores, hence users of this + * device should avoid making inconsistent accesses to the device. In + * particular, accessing the read interface, without first generating + * a write containing a readback packet can leave the ICAP in an + * inaccessible state. + * + * Note that in order to use the read interface, it is first necessary + * to write a request packet to the write interface. i.e., it is not + * possible to simply readback the bitstream (or any configuration + * bits) from a device without specifically requesting them first. + * The code to craft such packets is intended to be part of the + * user-space application code that uses this device. The simplest + * way to use this interface is simply: + * + * cp foo.bit /dev/xilinx_icap + * + * Note that unless foo.bit is an appropriately constructed partial + * bitstream, this has a high likelyhood of overwriting the design + * currently programmed in the FPGA. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/fcntl.h> +#include <linux/init.h> +#include <linux/poll.h> +#include <linux/proc_fs.h> +#include <asm/semaphore.h> +#include <linux/sysctl.h> +#include <linux/version.h> +#include <linux/fs.h> +#include <linux/cdev.h> +#include <linux/platform_device.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +#ifdef CONFIG_OF +/* For open firmware. */ +#include <linux/of_device.h> +#include <linux/of_platform.h> +#endif + +#include "xilinx_hwicap.h" +#include "buffer_icap.h" +#include "fifo_icap.h" + +#define DRIVER_NAME "xilinx_icap" + +#define HWICAP_REGS (0x10000) + +/* dynamically allocate device number */ +static int xhwicap_major; +static int xhwicap_minor; +#define HWICAP_DEVICES 1 + +module_param(xhwicap_major, int, S_IRUGO); +module_param(xhwicap_minor, int, S_IRUGO); + +/* An array, which is set to true when the device is registered. */ +static bool probed_devices[HWICAP_DEVICES]; + +static struct class *icap_class; + +#define UNIMPLEMENTED 0xFFFF + +static const struct config_registers v2_config_registers = { + .CRC = 0, + .FAR = 1, + .FDRI = 2, + .FDRO = 3, + .CMD = 4, + .CTL = 5, + .MASK = 6, + .STAT = 7, + .LOUT = 8, + .COR = 9, + .MFWR = 10, + .FLR = 11, + .KEY = 12, + .CBC = 13, + .IDCODE = 14, + .AXSS = UNIMPLEMENTED, + .C0R_1 = UNIMPLEMENTED, + .CSOB = UNIMPLEMENTED, + .WBSTAR = UNIMPLEMENTED, + .TIMER = UNIMPLEMENTED, + .BOOTSTS = UNIMPLEMENTED, + .CTL_1 = UNIMPLEMENTED, +}; + +static const struct config_registers v4_config_registers = { + .CRC = 0, + .FAR = 1, + .FDRI = 2, + .FDRO = 3, + .CMD = 4, + .CTL = 5, + .MASK = 6, + .STAT = 7, + .LOUT = 8, + .COR = 9, + .MFWR = 10, + .FLR = UNIMPLEMENTED, + .KEY = UNIMPLEMENTED, + .CBC = 11, + .IDCODE = 12, + .AXSS = 13, + .C0R_1 = UNIMPLEMENTED, + .CSOB = UNIMPLEMENTED, + .WBSTAR = UNIMPLEMENTED, + .TIMER = UNIMPLEMENTED, + .BOOTSTS = UNIMPLEMENTED, + .CTL_1 = UNIMPLEMENTED, +}; +static const struct config_registers v5_config_registers = { + .CRC = 0, + .FAR = 1, + .FDRI = 2, + .FDRO = 3, + .CMD = 4, + .CTL = 5, + .MASK = 6, + .STAT = 7, + .LOUT = 8, + .COR = 9, + .MFWR = 10, + .FLR = UNIMPLEMENTED, + .KEY = UNIMPLEMENTED, + .CBC = 11, + .IDCODE = 12, + .AXSS = 13, + .C0R_1 = 14, + .CSOB = 15, + .WBSTAR = 16, + .TIMER = 17, + .BOOTSTS = 18, + .CTL_1 = 19, +}; + +/** + * hwicap_command_desync: Send a DESYNC command to the ICAP port. + * @parameter drvdata: a pointer to the drvdata. + * + * This command desynchronizes the ICAP After this command, a + * bitstream containing a NULL packet, followed by a SYNCH packet is + * required before the ICAP will recognize commands. + */ +int hwicap_command_desync(struct hwicap_drvdata *drvdata) +{ + u32 buffer[4]; + u32 index = 0; + + /* + * Create the data to be written to the ICAP. + */ + buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1; + buffer[index++] = XHI_CMD_DESYNCH; + buffer[index++] = XHI_NOOP_PACKET; + buffer[index++] = XHI_NOOP_PACKET; + + /* + * Write the data to the FIFO and intiate the transfer of data present + * in the FIFO to the ICAP device. + */ + return drvdata->config->set_configuration(drvdata, + &buffer[0], index); +} + +/** + * hwicap_command_capture: Send a CAPTURE command to the ICAP port. + * @parameter drvdata: a pointer to the drvdata. + * + * This command captures all of the flip flop states so they will be + * available during readback. One can use this command instead of + * enabling the CAPTURE block in the design. + */ +int hwicap_command_capture(struct hwicap_drvdata *drvdata) +{ + u32 buffer[7]; + u32 index = 0; + + /* + * Create the data to be written to the ICAP. + */ + buffer[index++] = XHI_DUMMY_PACKET; + buffer[index++] = XHI_SYNC_PACKET; + buffer[index++] = XHI_NOOP_PACKET; + buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1; + buffer[index++] = XHI_CMD_GCAPTURE; + buffer[index++] = XHI_DUMMY_PACKET; + buffer[index++] = XHI_DUMMY_PACKET; + + /* + * Write the data to the FIFO and intiate the transfer of data + * present in the FIFO to the ICAP device. + */ + return drvdata->config->set_configuration(drvdata, + &buffer[0], index); + +} + +/** + * hwicap_get_configuration_register: Query a configuration register. + * @parameter drvdata: a pointer to the drvdata. + * @parameter reg: a constant which represents the configuration + * register value to be returned. + * Examples: XHI_IDCODE, XHI_FLR. + * @parameter RegData: returns the value of the register. + * + * Sends a query packet to the ICAP and then receives the response. + * The icap is left in Synched state. + */ +int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata, + u32 reg, u32 *RegData) +{ + int status; + u32 buffer[6]; + u32 index = 0; + + /* + * Create the data to be written to the ICAP. + */ + buffer[index++] = XHI_DUMMY_PACKET; + buffer[index++] = XHI_SYNC_PACKET; + buffer[index++] = XHI_NOOP_PACKET; + buffer[index++] = hwicap_type_1_read(reg) | 1; + buffer[index++] = XHI_NOOP_PACKET; + buffer[index++] = XHI_NOOP_PACKET; + + /* + * Write the data to the FIFO and intiate the transfer of data present + * in the FIFO to the ICAP device. + */ + status = drvdata->config->set_configuration(drvdata, + &buffer[0], index); + if (status) + return status; + + /* + * Read the configuration register + */ + status = drvdata->config->get_configuration(drvdata, RegData, 1); + if (status) + return status; + + return 0; +} + +int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata) +{ + int status; + u32 idcode; + + dev_dbg(drvdata->dev, "initializing\n"); + + /* Abort any current transaction, to make sure we have the + * ICAP in a good state. */ + dev_dbg(drvdata->dev, "Reset...\n"); + drvdata->config->reset(drvdata); + + dev_dbg(drvdata->dev, "Desync...\n"); + status = hwicap_command_desync(drvdata); + if (status) + return status; + + /* Attempt to read the IDCODE from ICAP. This + * may not be returned correctly, due to the design of the + * hardware. + */ + dev_dbg(drvdata->dev, "Reading IDCODE...\n"); + status = hwicap_get_configuration_register( + drvdata, drvdata->config_regs->IDCODE, &idcode); + dev_dbg(drvdata->dev, "IDCODE = %x\n", idcode); + if (status) + return status; + + dev_dbg(drvdata->dev, "Desync...\n"); + status = hwicap_command_desync(drvdata); + if (status) + return status; + + return 0; +} + +static ssize_t +hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) +{ + struct hwicap_drvdata *drvdata = file->private_data; + ssize_t bytes_to_read = 0; + u32 *kbuf; + u32 words; + u32 bytes_remaining; + int status; + + if (down_interruptible(&drvdata->sem)) + return -ERESTARTSYS; + + if (drvdata->read_buffer_in_use) { + /* If there are leftover bytes in the buffer, just */ + /* return them and don't try to read more from the */ + /* ICAP device. */ + bytes_to_read = + (count < drvdata->read_buffer_in_use) ? count : + drvdata->read_buffer_in_use; + + /* Return the data currently in the read buffer. */ + if (copy_to_user(buf, drvdata->read_buffer, bytes_to_read)) { + status = -EFAULT; + goto error; + } + drvdata->read_buffer_in_use -= bytes_to_read; + memcpy(drvdata->read_buffer + bytes_to_read, + drvdata->read_buffer, 4 - bytes_to_read); + } else { + /* Get new data from the ICAP, and return was was requested. */ + kbuf = (u32 *) get_zeroed_page(GFP_KERNEL); + if (!kbuf) { + status = -ENOMEM; + goto error; + } + + /* The ICAP device is only able to read complete */ + /* words. If a number of bytes that do not correspond */ + /* to complete words is requested, then we read enough */ + /* words to get the required number of bytes, and then */ + /* save the remaining bytes for the next read. */ + + /* Determine the number of words to read, rounding up */ + /* if necessary. */ + words = ((count + 3) >> 2); + bytes_to_read = words << 2; + + if (bytes_to_read > PAGE_SIZE) + bytes_to_read = PAGE_SIZE; + + /* Ensure we only read a complete number of words. */ + bytes_remaining = bytes_to_read & 3; + bytes_to_read &= ~3; + words = bytes_to_read >> 2; + + status = drvdata->config->get_configuration(drvdata, + kbuf, words); + + /* If we didn't read correctly, then bail out. */ + if (status) { + free_page((unsigned long)kbuf); + goto error; + } + + /* If we fail to return the data to the user, then bail out. */ + if (copy_to_user(buf, kbuf, bytes_to_read)) { + free_page((unsigned long)kbuf); + status = -EFAULT; + goto error; + } + memcpy(kbuf, drvdata->read_buffer, bytes_remaining); + drvdata->read_buffer_in_use = bytes_remaining; + free_page((unsigned long)kbuf); + } + status = bytes_to_read; + error: + up(&drvdata->sem); + return status; +} + +static ssize_t +hwicap_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) +{ + struct hwicap_drvdata *drvdata = file->private_data; + ssize_t written = 0; + ssize_t left = count; + u32 *kbuf; + ssize_t len; + ssize_t status; + + if (down_interruptible(&drvdata->sem)) + return -ERESTARTSYS; + + left += drvdata->write_buffer_in_use; + + /* Only write multiples of 4 bytes. */ + if (left < 4) { + status = 0; + goto error; + } + + kbuf = (u32 *) __get_free_page(GFP_KERNEL); + if (!kbuf) { + status = -ENOMEM; + goto error; + } + + while (left > 3) { + /* only write multiples of 4 bytes, so there might */ + /* be as many as 3 bytes left (at the end). */ + len = left; + + if (len > PAGE_SIZE) + len = PAGE_SIZE; + len &= ~3; + + if (drvdata->write_buffer_in_use) { + memcpy(kbuf, drvdata->write_buffer, + drvdata->write_buffer_in_use); + if (copy_from_user( + (((char *)kbuf) + (drvdata->write_buffer_in_use)), + buf + written, + len - (drvdata->write_buffer_in_use))) { + free_page((unsigned long)kbuf); + status = -EFAULT; + goto error; + } + } else { + if (copy_from_user(kbuf, buf + written, len)) { + free_page((unsigned long)kbuf); + status = -EFAULT; + goto error; + } + } + + status = drvdata->config->set_configuration(drvdata, + kbuf, len >> 2); + + if (status) { + free_page((unsigned long)kbuf); + status = -EFAULT; + goto error; + } + if (drvdata->write_buffer_in_use) { + len -= drvdata->write_buffer_in_use; + left -= drvdata->write_buffer_in_use; + drvdata->write_buffer_in_use = 0; + } + written += len; + left -= len; + } + if ((left > 0) && (left < 4)) { + if (!copy_from_user(drvdata->write_buffer, + buf + written, left)) { + drvdata->write_buffer_in_use = left; + written += left; + left = 0; + } + } + + free_page((unsigned long)kbuf); + status = written; + error: + up(&drvdata->sem); + return status; +} + +static int hwicap_open(struct inode *inode, struct file *file) +{ + struct hwicap_drvdata *drvdata; + int status; + + drvdata = container_of(inode->i_cdev, struct hwicap_drvdata, cdev); + + if (down_interruptible(&drvdata->sem)) + return -ERESTARTSYS; + + if (drvdata->is_open) { + status = -EBUSY; + goto error; + } + + status = hwicap_initialize_hwicap(drvdata); + if (status) { + dev_err(drvdata->dev, "Failed to open file"); + goto error; + } + + file->private_data = drvdata; + drvdata->write_buffer_in_use = 0; + drvdata->read_buffer_in_use = 0; + drvdata->is_open = 1; + + error: + up(&drvdata->sem); + return status; +} + +static int hwicap_release(struct inode *inode, struct file *file) +{ + struct hwicap_drvdata *drvdata = file->private_data; + int i; + int status = 0; + + if (down_interruptible(&drvdata->sem)) + return -ERESTARTSYS; + + if (drvdata->write_buffer_in_use) { + /* Flush write buffer. */ + for (i = drvdata->write_buffer_in_use; i < 4; i++) + drvdata->write_buffer[i] = 0; + + status = drvdata->config->set_configuration(drvdata, + (u32 *) drvdata->write_buffer, 1); + if (status) + goto error; + } + + status = hwicap_command_desync(drvdata); + if (status) + goto error; + + error: + drvdata->is_open = 0; + up(&drvdata->sem); + return status; +} + +static struct file_operations hwicap_fops = { + .owner = THIS_MODULE, + .write = hwicap_write, + .read = hwicap_read, + .open = hwicap_open, + .release = hwicap_release, +}; + +static int __devinit hwicap_setup(struct device *dev, int id, + const struct resource *regs_res, + const struct hwicap_driver_config *config, + const struct config_registers *config_regs) +{ + dev_t devt; + struct hwicap_drvdata *drvdata = NULL; + int retval = 0; + + dev_info(dev, "Xilinx icap port driver\n"); + + if (id < 0) { + for (id = 0; id < HWICAP_DEVICES; id++) + if (!probed_devices[id]) + break; + } + if (id < 0 || id >= HWICAP_DEVICES) { + dev_err(dev, "%s%i too large\n", DRIVER_NAME, id); + return -EINVAL; + } + if (probed_devices[id]) { + dev_err(dev, "cannot assign to %s%i; it is already in use\n", + DRIVER_NAME, id); + return -EBUSY; + } + + probed_devices[id] = 1; + + devt = MKDEV(xhwicap_major, xhwicap_minor + id); + + drvdata = kmalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL); + if (!drvdata) { + dev_err(dev, "Couldn't allocate device private record\n"); + return -ENOMEM; + } + memset((void *)drvdata, 0, sizeof(struct hwicap_drvdata)); + dev_set_drvdata(dev, (void *)drvdata); + + if (!regs_res) { + dev_err(dev, "Couldn't get registers resource\n"); + retval = -EFAULT; + goto failed1; + } + + drvdata->mem_start = regs_res->start; + drvdata->mem_end = regs_res->end; + drvdata->mem_size = regs_res->end - regs_res->start + 1; + + if (!request_mem_region(drvdata->mem_start, + drvdata->mem_size, DRIVER_NAME)) { + dev_err(dev, "Couldn't lock memory region at %p\n", + (void *)regs_res->start); + retval = -EBUSY; + goto failed1; + } + + drvdata->devt = devt; + drvdata->dev = dev; + drvdata->base_address = ioremap(drvdata->mem_start, drvdata->mem_size); + if (!drvdata->base_address) { + dev_err(dev, "ioremap() failed\n"); + goto failed2; + } + + drvdata->config = config; + drvdata->config_regs = config_regs; + + init_MUTEX(&drvdata->sem); + drvdata->is_open = 0; + + dev_info(dev, "ioremap %lx to %p with size %x\n", + (unsigned long int)drvdata->mem_start, + drvdata->base_address, drvdata->mem_size); + + cdev_init(&drvdata->cdev, &hwicap_fops); + drvdata->cdev.owner = THIS_MODULE; + retval = cdev_add(&drvdata->cdev, devt, 1); + if (retval) { + dev_err(dev, "cdev_add() failed\n"); + goto failed3; + } + /* devfs_mk_cdev(devt, S_IFCHR|S_IRUGO|S_IWUGO, DRIVER_NAME); */ + class_device_create(icap_class, NULL, devt, NULL, DRIVER_NAME); + return 0; /* success */ + + failed3: + iounmap(drvdata->base_address); + + failed2: + release_mem_region(regs_res->start, drvdata->mem_size); + + failed1: + kfree(drvdata); + + return retval; +} + +static struct hwicap_driver_config buffer_icap_config = { + .get_configuration = buffer_icap_get_configuration, + .set_configuration = buffer_icap_set_configuration, + .reset = buffer_icap_reset, +}; + +static struct hwicap_driver_config fifo_icap_config = { + .get_configuration = fifo_icap_get_configuration, + .set_configuration = fifo_icap_set_configuration, + .reset = fifo_icap_reset, +}; + +static int __devexit hwicap_remove(struct device *dev) +{ + struct hwicap_drvdata *drvdata; + + drvdata = (struct hwicap_drvdata *)dev_get_drvdata(dev); + + if (!drvdata) + return 0; + + class_device_destroy(icap_class, drvdata->devt); + cdev_del(&drvdata->cdev); + iounmap(drvdata->base_address); + release_mem_region(drvdata->mem_start, drvdata->mem_size); + kfree(drvdata); + dev_set_drvdata(dev, NULL); + probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0; + + return 0; /* success */ +} + +static int __devinit hwicap_drv_probe(struct platform_device *pdev) +{ + struct resource *res; + const struct config_registers *regs; + const char *family; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + /* It's most likely that we're using V4, if the family is not + specified */ + regs = &v4_config_registers; + family = pdev->dev.platform_data; + + if (family) { + if (!strcmp(family, "virtex2p")) { + regs = &v2_config_registers; + } else if (!strcmp(family, "virtex4")) { + regs = &v4_config_registers; + } else if (!strcmp(family, "virtex5")) { + regs = &v5_config_registers; + } + } + + return hwicap_setup(&pdev->dev, pdev->id, res, + &buffer_icap_config, regs); +} + +static int __devexit hwicap_drv_remove(struct platform_device *pdev) +{ + return hwicap_remove(&pdev->dev); +} + +static struct platform_driver hwicap_platform_driver = { + .probe = hwicap_drv_probe, + .remove = hwicap_drv_remove, + .driver = { + .owner = THIS_MODULE, + .name = DRIVER_NAME, + }, +}; + +/* --------------------------------------------------------------------- + * OF bus binding + */ + +#if defined(CONFIG_OF) +static int __devinit +hwicap_of_probe(struct of_device *op, const struct of_device_id *match) +{ + struct resource res; + const unsigned int *id; + const char *family; + int rc; + const struct hwicap_driver_config *config = match->data; + const struct config_registers *regs; + + dev_dbg(&op->dev, "hwicap_of_probe(%p, %p)\n", op, match); + + rc = of_address_to_resource(op->node, 0, &res); + if (rc) { + dev_err(&op->dev, "invalid address\n"); + return rc; + } + + id = of_get_property(op->node, "port-number", NULL); + + /* It's most likely that we're using V4, if the family is not + specified */ + regs = &v4_config_registers; + family = of_get_property(op->node, "xlnx,family", NULL); + + if (family) { + if (!strcmp(family, "virtex2p")) { + regs = &v2_config_registers; + } else if (!strcmp(family, "virtex4")) { + regs = &v4_config_registers; + } else if (!strcmp(family, "virtex5")) { + regs = &v5_config_registers; + } + } + return hwicap_setup(&op->dev, id ? *id : -1, &res, config, + regs); +} + +static int __devexit hwicap_of_remove(struct of_device *op) +{ + return hwicap_remove(&op->dev); +} + +/* Match table for of_platform binding */ +static const struct of_device_id __devinit hwicap_of_match[] = { + { .compatible = "xlnx,opb-hwicap-1.00.b", .data = &buffer_icap_config}, + { .compatible = "xlnx,xps-hwicap-1.00.a", .data = &fifo_icap_config}, + {}, +}; +MODULE_DEVICE_TABLE(of, hwicap_of_match); + +static struct of_platform_driver hwicap_of_driver = { + .owner = THIS_MODULE, + .name = DRIVER_NAME, + .match_table = hwicap_of_match, + .probe = hwicap_of_probe, + .remove = __devexit_p(hwicap_of_remove), + .driver = { + .name = DRIVER_NAME, + }, +}; + +/* Registration helpers to keep the number of #ifdefs to a minimum */ +static inline int __devinit hwicap_of_register(void) +{ + pr_debug("hwicap: calling of_register_platform_driver()\n"); + return of_register_platform_driver(&hwicap_of_driver); +} + +static inline void __devexit hwicap_of_unregister(void) +{ + of_unregister_platform_driver(&hwicap_of_driver); +} +#else /* CONFIG_OF */ +/* CONFIG_OF not enabled; do nothing helpers */ +static inline int __devinit hwicap_of_register(void) { return 0; } +static inline void __devexit hwicap_of_unregister(void) { } +#endif /* CONFIG_OF */ + +static int __devinit hwicap_module_init(void) +{ + dev_t devt; + int retval; + + icap_class = class_create(THIS_MODULE, "xilinx_config"); + + if (xhwicap_major) { + devt = MKDEV(xhwicap_major, xhwicap_minor); + retval = register_chrdev_region( + devt, + HWICAP_DEVICES, + DRIVER_NAME); + if (retval < 0) + return retval; + } else { + retval = alloc_chrdev_region(&devt, + xhwicap_minor, + HWICAP_DEVICES, + DRIVER_NAME); + if (retval < 0) + return retval; + xhwicap_major = MAJOR(devt); + } + + retval = platform_driver_register(&hwicap_platform_driver); + + if (retval) + goto failed1; + + retval = hwicap_of_register(); + + if (retval) + goto failed2; + + return retval; + + failed2: + platform_driver_unregister(&hwicap_platform_driver); + + failed1: + unregister_chrdev_region(devt, HWICAP_DEVICES); + + return retval; +} + +static void __devexit hwicap_module_cleanup(void) +{ + dev_t devt = MKDEV(xhwicap_major, xhwicap_minor); + + class_destroy(icap_class); + + platform_driver_unregister(&hwicap_platform_driver); + + hwicap_of_unregister(); + + unregister_chrdev_region(devt, HWICAP_DEVICES); +} + +module_init(hwicap_module_init); +module_exit(hwicap_module_cleanup); + +MODULE_AUTHOR("Xilinx, Inc; Xilinx Research Labs Group"); +MODULE_DESCRIPTION("Xilinx ICAP Port Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h new file mode 100644 index 00000000000..ae771cac162 --- /dev/null +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h @@ -0,0 +1,193 @@ +/***************************************************************************** + * + * Author: Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" + * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND + * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, + * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, + * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION + * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, + * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE + * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY + * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE + * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR + * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF + * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE. + * + * Xilinx products are not intended for use in life support appliances, + * devices, or systems. Use in such applications is expressly prohibited. + * + * (c) Copyright 2003-2007 Xilinx Inc. + * All rights reserved. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + *****************************************************************************/ + +#ifndef XILINX_HWICAP_H_ /* prevent circular inclusions */ +#define XILINX_HWICAP_H_ /* by using protection macros */ + +#include <linux/types.h> +#include <linux/cdev.h> +#include <linux/version.h> +#include <linux/platform_device.h> + +#include <asm/io.h> + +struct hwicap_drvdata { + u32 write_buffer_in_use; /* Always in [0,3] */ + u8 write_buffer[4]; + u32 read_buffer_in_use; /* Always in [0,3] */ + u8 read_buffer[4]; + u32 mem_start; /* phys. address of the control registers */ + u32 mem_end; /* phys. address of the control registers */ + u32 mem_size; + void __iomem *base_address;/* virt. address of the control registers */ + + struct device *dev; + struct cdev cdev; /* Char device structure */ + dev_t devt; + + const struct hwicap_driver_config *config; + const struct config_registers *config_regs; + void *private_data; + bool is_open; + struct semaphore sem; +}; + +struct hwicap_driver_config { + int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data, + u32 size); + int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data, + u32 size); + void (*reset)(struct hwicap_drvdata *drvdata); +}; + +/* Number of times to poll the done regsiter */ +#define XHI_MAX_RETRIES 10 + +/************ Constant Definitions *************/ + +#define XHI_PAD_FRAMES 0x1 + +/* Mask for calculating configuration packet headers */ +#define XHI_WORD_COUNT_MASK_TYPE_1 0x7FFUL +#define XHI_WORD_COUNT_MASK_TYPE_2 0x1FFFFFUL +#define XHI_TYPE_MASK 0x7 +#define XHI_REGISTER_MASK 0xF +#define XHI_OP_MASK 0x3 + +#define XHI_TYPE_SHIFT 29 +#define XHI_REGISTER_SHIFT 13 +#define XHI_OP_SHIFT 27 + +#define XHI_TYPE_1 1 +#define XHI_TYPE_2 2 +#define XHI_OP_WRITE 2 +#define XHI_OP_READ 1 + +/* Address Block Types */ +#define XHI_FAR_CLB_BLOCK 0 +#define XHI_FAR_BRAM_BLOCK 1 +#define XHI_FAR_BRAM_INT_BLOCK 2 + +struct config_registers { + u32 CRC; + u32 FAR; + u32 FDRI; + u32 FDRO; + u32 CMD; + u32 CTL; + u32 MASK; + u32 STAT; + u32 LOUT; + u32 COR; + u32 MFWR; + u32 FLR; + u32 KEY; + u32 CBC; + u32 IDCODE; + u32 AXSS; + u32 C0R_1; + u32 CSOB; + u32 WBSTAR; + u32 TIMER; + u32 BOOTSTS; + u32 CTL_1; +}; + +/* Configuration Commands */ +#define XHI_CMD_NULL 0 +#define XHI_CMD_WCFG 1 +#define XHI_CMD_MFW 2 +#define XHI_CMD_DGHIGH 3 +#define XHI_CMD_RCFG 4 +#define XHI_CMD_START 5 +#define XHI_CMD_RCAP 6 +#define XHI_CMD_RCRC 7 +#define XHI_CMD_AGHIGH 8 +#define XHI_CMD_SWITCH 9 +#define XHI_CMD_GRESTORE 10 +#define XHI_CMD_SHUTDOWN 11 +#define XHI_CMD_GCAPTURE 12 +#define XHI_CMD_DESYNCH 13 +#define XHI_CMD_IPROG 15 /* Only in Virtex5 */ +#define XHI_CMD_CRCC 16 /* Only in Virtex5 */ +#define XHI_CMD_LTIMER 17 /* Only in Virtex5 */ + +/* Packet constants */ +#define XHI_SYNC_PACKET 0xAA995566UL +#define XHI_DUMMY_PACKET 0xFFFFFFFFUL +#define XHI_NOOP_PACKET (XHI_TYPE_1 << XHI_TYPE_SHIFT) +#define XHI_TYPE_2_READ ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \ + (XHI_OP_READ << XHI_OP_SHIFT)) + +#define XHI_TYPE_2_WRITE ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \ + (XHI_OP_WRITE << XHI_OP_SHIFT)) + +#define XHI_TYPE2_CNT_MASK 0x07FFFFFF + +#define XHI_TYPE_1_PACKET_MAX_WORDS 2047UL +#define XHI_TYPE_1_HEADER_BYTES 4 +#define XHI_TYPE_2_HEADER_BYTES 8 + +/* Constant to use for CRC check when CRC has been disabled */ +#define XHI_DISABLED_AUTO_CRC 0x0000DEFCUL + +/** + * hwicap_type_1_read: Generates a Type 1 read packet header. + * @parameter: Register is the address of the register to be read back. + * + * Generates a Type 1 read packet header, which is used to indirectly + * read registers in the configuration logic. This packet must then + * be sent through the icap device, and a return packet received with + * the information. + **/ +static inline u32 hwicap_type_1_read(u32 Register) +{ + return (XHI_TYPE_1 << XHI_TYPE_SHIFT) | + (Register << XHI_REGISTER_SHIFT) | + (XHI_OP_READ << XHI_OP_SHIFT); +} + +/** + * hwicap_type_1_write: Generates a Type 1 write packet header + * @parameter: Register is the address of the register to be read back. + **/ +static inline u32 hwicap_type_1_write(u32 Register) +{ + return (XHI_TYPE_1 << XHI_TYPE_SHIFT) | + (Register << XHI_REGISTER_SHIFT) | + (XHI_OP_WRITE << XHI_OP_SHIFT); +} + +#endif |