diff options
Diffstat (limited to 'drivers/ata/pata_legacy.c')
| -rw-r--r-- | drivers/ata/pata_legacy.c | 949 |
1 files changed, 949 insertions, 0 deletions
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c new file mode 100644 index 00000000000..ad37c220bb2 --- /dev/null +++ b/drivers/ata/pata_legacy.c @@ -0,0 +1,949 @@ +/* + * pata-legacy.c - Legacy port PATA/SATA controller driver. + * Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * An ATA driver for the legacy ATA ports. + * + * Data Sources: + * Opti 82C465/82C611 support: Data sheets at opti-inc.com + * HT6560 series: + * Promise 20230/20620: + * http://www.ryston.cz/petr/vlb/pdc20230b.html + * http://www.ryston.cz/petr/vlb/pdc20230c.html + * http://www.ryston.cz/petr/vlb/pdc20630.html + * + * Unsupported but docs exist: + * Appian/Adaptec AIC25VL01/Cirrus Logic PD7220 + * Winbond W83759A + * + * This driver handles legacy (that is "ISA/VLB side") IDE ports found + * on PC class systems. There are three hybrid devices that are exceptions + * The Cyrix 5510/5520 where a pre SFF ATA device is on the bridge and + * the MPIIX where the tuning is PCI side but the IDE is "ISA side". + * + * Specific support is included for the ht6560a/ht6560b/opti82c611a/ + * opti82c465mv/promise 20230c/20630 + * + * Use the autospeed and pio_mask options with: + * Appian ADI/2 aka CLPD7220 or AIC25VL01. + * Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with + * Goldstar GM82C711, PIC-1288A-125, UMC 82C871F, Winbond W83759, + * Winbond W83759A, Promise PDC20230-B + * + * For now use autospeed and pio_mask as above with the W83759A. This may + * change. + * + * TODO + * Merge existing pata_qdi driver + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/ata.h> +#include <linux/libata.h> +#include <linux/platform_device.h> + +#define DRV_NAME "pata_legacy" +#define DRV_VERSION "0.5.3" + +#define NR_HOST 6 + +static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; +static int legacy_irq[NR_HOST] = { 15, 14, 11, 10, 8, 12 }; + +struct legacy_data { + unsigned long timing; + u8 clock[2]; + u8 last; + int fast; + struct platform_device *platform_dev; + +}; + +static struct legacy_data legacy_data[NR_HOST]; +static struct ata_host *legacy_host[NR_HOST]; +static int nr_legacy_host; + + +static int probe_all; /* Set to check all ISA port ranges */ +static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */ +static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */ +static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */ +static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */ +static int autospeed; /* Chip present which snoops speed changes */ +static int pio_mask = 0x1F; /* PIO range for autospeed devices */ + +/** + * legacy_set_mode - mode setting + * @ap: IDE interface + * + * Use a non standard set_mode function. We don't want to be tuned. + * + * The BIOS configured everything. Our job is not to fiddle. Just use + * whatever PIO the hardware is using and leave it at that. When we + * get some kind of nice user driven API for control then we can + * expand on this as per hdparm in the base kernel. + */ + +static void legacy_set_mode(struct ata_port *ap) +{ + int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev)) { + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } +} + +static struct scsi_host_template legacy_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +/* + * These ops are used if the user indicates the hardware + * snoops the commands to decide on the mode and handles the + * mode selection "magically" itself. Several legacy controllers + * do this. The mode range can be set if it is not 0x1F by setting + * pio_mask as well. + */ + +static struct ata_port_operations simple_port_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer_noirq, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static struct ata_port_operations legacy_port_ops = { + .set_mode = legacy_set_mode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer_noirq, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Promise 20230C and 20620 support + * + * This controller supports PIO0 to PIO2. We set PIO timings conservatively to + * allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to + * controller and PIO'd to the host and not supported. + */ + +static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int tries = 5; + int pio = adev->pio_mode - XFER_PIO_0; + u8 rt; + unsigned long flags; + + /* Safe as UP only. Force I/Os to occur together */ + + local_irq_save(flags); + + /* Unlock the control interface */ + do + { + inb(0x1F5); + outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F2); + inb(0x3F6); + inb(0x3F6); + inb(0x1F2); + inb(0x1F2); + } + while((inb(0x1F2) & 0x80) && --tries); + + local_irq_restore(flags); + + outb(inb(0x1F4) & 0x07, 0x1F4); + + rt = inb(0x1F3); + rt &= 0x07 << (3 * adev->devno); + if (pio) + rt |= (1 + 3 * pio) << (3 * adev->devno); + + udelay(100); + outb(inb(0x1F2) | 0x01, 0x1F2); + udelay(100); + inb(0x1F5); + +} + +static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + int slop = buflen & 3; + unsigned long flags; + + if (ata_id_has_dword_io(adev->id)) { + local_irq_save(flags); + + /* Perform the 32bit I/O synchronization sequence */ + inb(ap->ioaddr.nsect_addr); + inb(ap->ioaddr.nsect_addr); + inb(ap->ioaddr.nsect_addr); + + /* Now the data */ + + if (write_data) + outsl(ap->ioaddr.data_addr, buf, buflen >> 2); + else + insl(ap->ioaddr.data_addr, buf, buflen >> 2); + + if (unlikely(slop)) { + u32 pad; + if (write_data) { + memcpy(&pad, buf + buflen - slop, slop); + outl(le32_to_cpu(pad), ap->ioaddr.data_addr); + } else { + pad = cpu_to_le16(inl(ap->ioaddr.data_addr)); + memcpy(buf + buflen - slop, &pad, slop); + } + } + local_irq_restore(flags); + } + else + ata_pio_data_xfer_noirq(adev, buf, buflen, write_data); +} + +static struct ata_port_operations pdc20230_port_ops = { + .set_piomode = pdc20230_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = pdc_data_xfer_vlb, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Holtek 6560A support + * + * This controller supports PIO0 to PIO2 (no IORDY even though higher timings + * can be loaded). + */ + +static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover; + struct ata_timing t; + + /* Get the timing data in cycles. For now play safe at 50Mhz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + + active = FIT(t.active, 2, 15); + recover = FIT(t.recover, 4, 15); + + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + + outb(recover << 4 | active, ap->ioaddr.device_addr); + inb(ap->ioaddr.status_addr); +} + +static struct ata_port_operations ht6560a_port_ops = { + .set_piomode = ht6560a_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, /* Check vlb/noirq */ + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Holtek 6560B support + * + * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting + * unless we see an ATAPI device in which case we force it off. + * + * FIXME: need to implement 2nd channel support. + */ + +static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover; + struct ata_timing t; + + /* Get the timing data in cycles. For now play safe at 50Mhz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + + active = FIT(t.active, 2, 15); + recover = FIT(t.recover, 2, 16); + recover &= 0x15; + + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + + outb(recover << 4 | active, ap->ioaddr.device_addr); + + if (adev->class != ATA_DEV_ATA) { + u8 rconf = inb(0x3E6); + if (rconf & 0x24) { + rconf &= ~ 0x24; + outb(rconf, 0x3E6); + } + } + inb(ap->ioaddr.status_addr); +} + +static struct ata_port_operations ht6560b_port_ops = { + .set_piomode = ht6560b_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, /* FIXME: Check 32bit and noirq */ + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Opti core chipset helpers + */ + +/** + * opti_syscfg - read OPTI chipset configuration + * @reg: Configuration register to read + * + * Returns the value of an OPTI system board configuration register. + */ + +static u8 opti_syscfg(u8 reg) +{ + unsigned long flags; + u8 r; + + /* Uniprocessor chipset and must force cycles adjancent */ + local_irq_save(flags); + outb(reg, 0x22); + r = inb(0x24); + local_irq_restore(flags); + return r; +} + +/* + * Opti 82C611A + * + * This controller supports PIO0 to PIO3. + */ + +static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover, setup; + struct ata_timing t; + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int khz[4] = { 50000, 40000, 33000, 25000 }; + u8 rc; + + /* Enter configuration mode */ + inw(ap->ioaddr.error_addr); + inw(ap->ioaddr.error_addr); + outb(3, ap->ioaddr.nsect_addr); + + /* Read VLB clock strapping */ + clock = 1000000000 / khz[inb(ap->ioaddr.lbah_addr) & 0x03]; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); + + /* Setup timing is shared */ + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); + + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + + active = FIT(t.active, 2, 17) - 2; + recover = FIT(t.recover, 1, 16) - 1; + setup = FIT(t.setup, 1, 4) - 1; + + /* Select the right timing bank for write timing */ + rc = inb(ap->ioaddr.lbal_addr); + rc &= 0x7F; + rc |= (adev->devno << 7); + outb(rc, ap->ioaddr.lbal_addr); + + /* Write the timings */ + outb(active << 4 | recover, ap->ioaddr.error_addr); + + /* Select the right bank for read timings, also + load the shared timings for address */ + rc = inb(ap->ioaddr.device_addr); + rc &= 0xC0; + rc |= adev->devno; /* Index select */ + rc |= (setup << 4) | 0x04; + outb(rc, ap->ioaddr.device_addr); + + /* Load the read timings */ + outb(active << 4 | recover, ap->ioaddr.data_addr); + + /* Ensure the timing register mode is right */ + rc = inb (ap->ioaddr.lbal_addr); + rc &= 0x73; + rc |= 0x84; + outb(rc, ap->ioaddr.lbal_addr); + + /* Exit command mode */ + outb(0x83, ap->ioaddr.nsect_addr); +} + + +static struct ata_port_operations opti82c611a_port_ops = { + .set_piomode = opti82c611a_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/* + * Opti 82C465MV + * + * This controller supports PIO0 to PIO3. Unlike the 611A the MVB + * version is dual channel but doesn't have a lot of unique registers. + */ + +static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover, setup; + struct ata_timing t; + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int khz[4] = { 50000, 40000, 33000, 25000 }; + u8 rc; + u8 sysclk; + + /* Get the clock */ + sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */ + + /* Enter configuration mode */ + inw(ap->ioaddr.error_addr); + inw(ap->ioaddr.error_addr); + outb(3, ap->ioaddr.nsect_addr); + + /* Read VLB clock strapping */ + clock = 1000000000 / khz[sysclk]; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); + + /* Setup timing is shared */ + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); + + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + + active = FIT(t.active, 2, 17) - 2; + recover = FIT(t.recover, 1, 16) - 1; + setup = FIT(t.setup, 1, 4) - 1; + + /* Select the right timing bank for write timing */ + rc = inb(ap->ioaddr.lbal_addr); + rc &= 0x7F; + rc |= (adev->devno << 7); + outb(rc, ap->ioaddr.lbal_addr); + + /* Write the timings */ + outb(active << 4 | recover, ap->ioaddr.error_addr); + + /* Select the right bank for read timings, also + load the shared timings for address */ + rc = inb(ap->ioaddr.device_addr); + rc &= 0xC0; + rc |= adev->devno; /* Index select */ + rc |= (setup << 4) | 0x04; + outb(rc, ap->ioaddr.device_addr); + + /* Load the read timings */ + outb(active << 4 | recover, ap->ioaddr.data_addr); + + /* Ensure the timing register mode is right */ + rc = inb (ap->ioaddr.lbal_addr); + rc &= 0x73; + rc |= 0x84; + outb(rc, ap->ioaddr.lbal_addr); + + /* Exit command mode */ + outb(0x83, ap->ioaddr.nsect_addr); + + /* We need to know this for quad device on the MVB */ + ap->host->private_data = ap; +} + +/** + * opt82c465mv_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. The + * MVB has a single set of timing registers and these are shared + * across channels. As there are two registers we really ought to + * track the last two used values as a sort of register window. For + * now we just reload on a channel switch. On the single channel + * setup this condition never fires so we do nothing extra. + * + * FIXME: dual channel needs ->serialize support + */ + +static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If timings are set and for the wrong channel (2nd test is + due to a libata shortcoming and will eventually go I hope) */ + if (ap->host->private_data != ap->host + && ap->host->private_data != NULL) + opti82c46x_set_piomode(ap, adev); + + return ata_qc_issue_prot(qc); +} + +static struct ata_port_operations opti82c46x_port_ops = { + .set_piomode = opti82c46x_set_piomode, + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = ata_bmdma_error_handler, + + .qc_prep = ata_qc_prep, + .qc_issue = opti82c46x_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + + +/** + * legacy_init_one - attach a legacy interface + * @port: port number + * @io: I/O port start + * @ctrl: control port + * @irq: interrupt line + * + * Register an ISA bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + */ + +static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq) +{ + struct legacy_data *ld = &legacy_data[nr_legacy_host]; + struct ata_probe_ent ae; + struct platform_device *pdev; + int ret = -EBUSY; + struct ata_port_operations *ops = &legacy_port_ops; + int pio_modes = pio_mask; + u32 mask = (1 << port); + + if (request_region(io, 8, "pata_legacy") == NULL) + return -EBUSY; + if (request_region(ctrl, 1, "pata_legacy") == NULL) + goto fail_io; + + pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0); + if (pdev == NULL) + goto fail_dev; + + if (ht6560a & mask) { + ops = &ht6560a_port_ops; + pio_modes = 0x07; + } + if (ht6560b & mask) { + ops = &ht6560b_port_ops; + pio_modes = 0x1F; + } + if (opti82c611a & mask) { + ops = &opti82c611a_port_ops; + pio_modes = 0x0F; + } + if (opti82c46x & mask) { + ops = &opti82c46x_port_ops; + pio_modes = 0x0F; + } + + /* Probe for automatically detectable controllers */ + + if (io == 0x1F0 && ops == &legacy_port_ops) { + unsigned long flags; + + local_irq_save(flags); + + /* Probes */ + inb(0x1F5); + outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F2); + inb(0x3F6); + inb(0x3F6); + inb(0x1F2); + inb(0x1F2); + + if ((inb(0x1F2) & 0x80) == 0) { + /* PDC20230c or 20630 ? */ + printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n"); + pio_modes = 0x07; + ops = &pdc20230_port_ops; + udelay(100); + inb(0x1F5); + } else { + outb(0x55, 0x1F2); + inb(0x1F2); + inb(0x1F2); + if (inb(0x1F2) == 0x00) { + printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n"); + } + } + local_irq_restore(flags); + } + + + /* Chip does mode setting by command snooping */ + if (ops == &legacy_port_ops && (autospeed & mask)) + ops = &simple_port_ops; + memset(&ae, 0, sizeof(struct ata_probe_ent)); + INIT_LIST_HEAD(&ae.node); + ae.dev = &pdev->dev; + ae.port_ops = ops; + ae.sht = &legacy_sht; + ae.n_ports = 1; + ae.pio_mask = pio_modes; + ae.irq = irq; + ae.irq_flags = 0; + ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST; + ae.port[0].cmd_addr = io; + ae.port[0].altstatus_addr = ctrl; + ae.port[0].ctl_addr = ctrl; + ata_std_ports(&ae.port[0]); + ae.private_data = ld; + + ret = ata_device_add(&ae); + if (ret == 0) { + ret = -ENODEV; + goto fail; + } + legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev); + ld->platform_dev = pdev; + return 0; + +fail: + platform_device_unregister(pdev); +fail_dev: + release_region(ctrl, 1); +fail_io: + release_region(io, 8); + return ret; +} + +/** + * legacy_check_special_cases - ATA special cases + * @p: PCI device to check + * @master: set this if we find an ATA master + * @master: set this if we find an ATA secondary + * + * A small number of vendors implemented early PCI ATA interfaces on bridge logic + * without the ATA interface being PCI visible. Where we have a matching PCI driver + * we must skip the relevant device here. If we don't know about it then the legacy + * driver is the right driver anyway. + */ + +static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary) +{ + /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */ + if (p->vendor == 0x1078 && p->device == 0x0000) { + *primary = *secondary = 1; + return; + } + /* Cyrix CS5520 pre SFF MWDMA ATA on the bridge */ + if (p->vendor == 0x1078 && p->device == 0x0002) { + *primary = *secondary = 1; + return; + } + /* Intel MPIIX - PIO ATA on non PCI side of bridge */ + if (p->vendor == 0x8086 && p->device == 0x1234) { + u16 r; + pci_read_config_word(p, 0x6C, &r); + if (r & 0x8000) { /* ATA port enabled */ + if (r & 0x4000) + *secondary = 1; + else + *primary = 1; + } + return; + } +} + + +/** + * legacy_init - attach legacy interfaces + * + * Attach legacy IDE interfaces by scanning the usual IRQ/port suspects. + * Right now we do not scan the ide0 and ide1 address but should do so + * for non PCI systems or systems with no PCI IDE legacy mode devices. + * If you fix that note there are special cases to consider like VLB + * drivers and CS5510/20. + */ + +static __init int legacy_init(void) +{ + int i; + int ct = 0; + int primary = 0; + int secondary = 0; + int last_port = NR_HOST; + + struct pci_dev *p = NULL; + + for_each_pci_dev(p) { + int r; + /* Check for any overlap of the system ATA mappings. Native mode controllers + stuck on these addresses or some devices in 'raid' mode won't be found by + the storage class test */ + for (r = 0; r < 6; r++) { + if (pci_resource_start(p, r) == 0x1f0) + primary = 1; + if (pci_resource_start(p, r) == 0x170) + secondary = 1; + } + /* Check for special cases */ + legacy_check_special_cases(p, &primary, &secondary); + + /* If PCI bus is present then don't probe for tertiary legacy ports */ + if (probe_all == 0) + last_port = 2; + } + + /* If an OPTI 82C46X is present find out where the channels are */ + if (opti82c46x) { + static const char *optis[4] = { + "3/463MV", "5MV", + "5MVA", "5MVB" + }; + u8 chans = 1; + u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; + + opti82c46x = 3; /* Assume master and slave first */ + printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]); + if (ctrl == 3) + chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; + ctrl = opti_syscfg(0xAC); + /* Check enabled and this port is the 465MV port. On the + MVB we may have two channels */ + if (ctrl & 8) { + if (ctrl & 4) + opti82c46x = 2; /* Slave */ + else + opti82c46x = 1; /* Master */ + if (chans == 2) + opti82c46x = 3; /* Master and Slave */ + } /* Slave only */ + else if (chans == 1) + opti82c46x = 1; + } + + for (i = 0; i < last_port; i++) { + /* Skip primary if we have seen a PCI one */ + if (i == 0 && primary == 1) + continue; + /* Skip secondary if we have seen a PCI one */ + if (i == 1 && secondary == 1) + continue; + if (legacy_init_one(i, legacy_port[i], + legacy_port[i] + 0x0206, + legacy_irq[i]) == 0) + ct++; + } + if (ct != 0) + return 0; + return -ENODEV; +} + +static __exit void legacy_exit(void) +{ + int i; + + for (i = 0; i < nr_legacy_host; i++) { + struct legacy_data *ld = &legacy_data[i]; + struct ata_port *ap =legacy_host[i]->ports[0]; + unsigned long io = ap->ioaddr.cmd_addr; + unsigned long ctrl = ap->ioaddr.ctl_addr; + ata_host_remove(legacy_host[i]); + platform_device_unregister(ld->platform_dev); + if (ld->timing) + release_region(ld->timing, 2); + release_region(io, 8); + release_region(ctrl, 1); + } +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for legacy ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_param(probe_all, int, 0); +module_param(autospeed, int, 0); +module_param(ht6560a, int, 0); +module_param(ht6560b, int, 0); +module_param(opti82c611a, int, 0); +module_param(opti82c46x, int, 0); +module_param(pio_mask, int, 0); + +module_init(legacy_init); +module_exit(legacy_exit); + |