diff options
Diffstat (limited to 'arch/ppc/boot/simple/rw4/rw4_init_brd.S')
| -rw-r--r-- | arch/ppc/boot/simple/rw4/rw4_init_brd.S | 1125 |
1 files changed, 1125 insertions, 0 deletions
diff --git a/arch/ppc/boot/simple/rw4/rw4_init_brd.S b/arch/ppc/boot/simple/rw4/rw4_init_brd.S new file mode 100644 index 00000000000..386afdaad6c --- /dev/null +++ b/arch/ppc/boot/simple/rw4/rw4_init_brd.S @@ -0,0 +1,1125 @@ +/*----------------------------------------------------------------------------+ +| This source code has been made available to you by IBM on an AS-IS +| basis. Anyone receiving this source is licensed under IBM +| copyrights to use it in any way he or she deems fit, including +| copying it, modifying it, compiling it, and redistributing it either +| with or without modifications. No license under IBM patents or +| patent applications is to be implied by the copyright license. +| +| Any user of this software should understand that IBM cannot provide +| technical support for this software and will not be responsible for +| any consequences resulting from the use of this software. +| +| Any person who transfers this source code or any derivative work +| must include the IBM copyright notice, this paragraph, and the +| preceding two paragraphs in the transferred software. +| +| COPYRIGHT I B M CORPORATION 1997 +| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M ++----------------------------------------------------------------------------*/ +/*----------------------------------------------------------------------------+ +| Author: Tony J. Cerreto +| Component: BSPS +| File: init_brd.s +| Purpose: Vesta Evaluation Board initialization subroutines. The following +| routines are available: +| 1. INITB_EBIU0: Initialize EBIU0. +| 2. INITB_CONFIG: Configure board. +| 3. INITB_HSMC0: Initialize HSMC0 (SDRAM). +| 4. INITB_HSMC1: Initialize HSMC1 (SDRAM). +| 5. INITB_CACHE: Initialize Data and Instruction Cache. +| 6. INITB_DCACHE: Initialize Data Cache. +| 7. INITB_ICACHE: Initialize Instruction Cache. +| 8. INITB_GET_CSPD: Get CPU Speed (Bus Speed and Processor Speed) +| +| Changes: +| Date: Author Comment: +| --------- ------ -------- +| 01-Mar-00 tjc Created +| 04-Mar-00 jfh Modified CIC_SEL3_VAL to support 1284 (Mux3 & GPIO 21-28) +| 04-Mar-00 jfh Modified XILINIX Reg 0 to support 1284 (Mux3 & GPIO 21-28) +| 04-Mar-00 jfh Modified XILINIX Reg 1 to support 1284 (Mux3 & GPIO 21-28) +| 04-Mar-00 jfh Modified XILINIX Reg 4 to support 1284 (Mux3 & GPIO 21-28) +| 19-May-00 rlb Relcoated HSMC0 to 0x1F000000 to support 32MB of contiguous +| SDRAM space. Changed cache ctl regs to reflect this. +| 22-May-00 tjc Changed initb_get_cspd interface and eliminated +| initb_get_bspd routines. +| 26-May-00 tjc Added two nop instructions after all mtxxx/mfxxx +| instructions due to PPC405 bug. ++----------------------------------------------------------------------------*/ +#define VESTA +#include "ppc_40x.h" +#include "stb.h" + +/*----------------------------------------------------------------------------+ +| BOARD CONFIGURATION DEFINES ++----------------------------------------------------------------------------*/ +#define CBS0_CR_VAL 0x00000002 /* CBS control reg value */ +#define CIC0_CR_VAL 0xD0800448 /* CIC control reg value */ +#define CIC0_SEL3_VAL 0x11500000 /* CIC select 3 reg value */ +#define CIC0_VCR_VAL 0x00631700 /* CIC video cntl reg value */ + +/*----------------------------------------------------------------------------+ +| EBIU0 BANK REGISTERS DEFINES ++----------------------------------------------------------------------------*/ +#define EBIU0_BRCRH0_VAL 0x00000000 /* BR High 0 (Extension Reg)*/ +#define EBIU0_BRCRH1_VAL 0x00000000 /* BR High 1 (Extension Reg)*/ +#define EBIU0_BRCRH2_VAL 0x40000000 /* BR High 2 (Extension Reg)*/ +#define EBIU0_BRCRH3_VAL 0x40000000 /* BR High 3 (Extension Reg)*/ +#define EBIU0_BRCRH4_VAL 0x00000000 /* BR High 4 (Extension Reg)*/ +#define EBIU0_BRCRH5_VAL 0x00000000 /* BR High 5 (Extension Reg)*/ +#define EBIU0_BRCRH6_VAL 0x00000000 /* BR High 6 (Extension Reg)*/ +#define EBIU0_BRCRH7_VAL 0x40000000 /* BR High 7 (Extension Reg)*/ + +#define EBIU0_BRCR0_VAL 0xFC58BFFE /* BR 0: 16 bit Flash 4 MB */ +#define EBIU0_BRCR1_VAL 0xFF00BFFE /* BR 1: Ext Connector 1 MB */ +#if 1 +#define EBIU0_BRCR2_VAL 0x207CFFBE /* BR 2: Xilinx 8 MB */ + /* twt == 0x3f */ +#else +#define EBIU0_BRCR2_VAL 0x207CCFBE /* BR 2: Xilinx 8 MB */ + /* twt == 0x0f */ +#endif +#define EBIU0_BRCR3_VAL 0x407CBFBE /* BR 3: IDE Drive 8 MB */ +#define EBIU0_BRCR4_VAL 0xFF00BFFF /* BR 4: Disabled. 0 MB */ +#define EBIU0_BRCR5_VAL 0xFF00BFFF /* BR 5: Disabled. 0 MB */ +#define EBIU0_BRCR6_VAL 0xFF00BFFF /* BR 6: Disabled. 0 MB */ +#define EBIU0_BRCR7_VAL 0xCE3F0003 /* BR 7: Line Mode DMA 2 MB */ + +/*----------------------------------------------------------------------------+ +| GPIO DEFINES ++----------------------------------------------------------------------------*/ +#define STB_GPIO0_OUTPUT (STB_GPIO0_BASE_ADDRESS+ 0x00) +#define STB_GPIO0_TC (STB_GPIO0_BASE_ADDRESS+ 0x04) +#define STB_GPIO0_OS_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x08) +#define STB_GPIO0_OS_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x0C) +#define STB_GPIO0_TS_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x10) +#define STB_GPIO0_TS_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x14) +#define STB_GPIO0_OD (STB_GPIO0_BASE_ADDRESS+ 0x18) +#define STB_GPIO0_INPUT (STB_GPIO0_BASE_ADDRESS+ 0x1C) +#define STB_GPIO0_R1 (STB_GPIO0_BASE_ADDRESS+ 0x20) +#define STB_GPIO0_R2 (STB_GPIO0_BASE_ADDRESS+ 0x24) +#define STB_GPIO0_R3 (STB_GPIO0_BASE_ADDRESS+ 0x28) +#define STB_GPIO0_IS_1_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x30) +#define STB_GPIO0_IS_1_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x34) +#define STB_GPIO0_IS_2_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x38) +#define STB_GPIO0_IS_2_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x3C) +#define STB_GPIO0_IS_3_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x40) +#define STB_GPIO0_IS_3_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x44) +#define STB_GPIO0_SS_1 (STB_GPIO0_BASE_ADDRESS+ 0x50) +#define STB_GPIO0_SS_2 (STB_GPIO0_BASE_ADDRESS+ 0x54) +#define STB_GPIO0_SS_3 (STB_GPIO0_BASE_ADDRESS+ 0x58) + +#define GPIO0_TC_VAL 0x0C020004 /* three-state control val */ +#define GPIO0_OS_0_31_VAL 0x51A00004 /* output select 0-31 val */ +#define GPIO0_OS_32_63_VAL 0x0000002F /* output select 32-63 val */ +#define GPIO0_TS_0_31_VAL 0x51A00000 /* three-state sel 0-31 val*/ +#define GPIO0_TS_32_63_VAL 0x0000000F /* three-state sel 32-63 val*/ +#define GPIO0_OD_VAL 0xC0000004 /* open drain val */ +#define GPIO0_IS_1_0_31_VAL 0x50000151 /* input select 1 0-31 val */ +#define GPIO0_IS_1_32_63_VAL 0x00000000 /* input select 1 32-63 val */ +#define GPIO0_IS_2_0_31_VAL 0x00000000 /* input select 2 0-31 val */ +#define GPIO0_IS_2_32_63_VAL 0x00000000 /* input select 2 32-63 val */ +#define GPIO0_IS_3_0_31_VAL 0x00000440 /* input select 3 0-31 val */ +#define GPIO0_IS_3_32_63_VAL 0x00000000 /* input select 3 32-63 val */ +#define GPIO0_SS_1_VAL 0x00000000 /* sync select 1 val */ +#define GPIO0_SS_2_VAL 0x00000000 /* sync select 2 val */ +#define GPIO0_SS_3_VAL 0x00000000 /* sync select 3 val */ + +/*----------------------------------------------------------------------------+ +| XILINX DEFINES ++----------------------------------------------------------------------------*/ +#define STB_XILINX_LED (STB_FPGA_BASE_ADDRESS+ 0x0100) +#define STB_XILINX1_REG0 (STB_FPGA_BASE_ADDRESS+ 0x40000) +#define STB_XILINX1_REG1 (STB_FPGA_BASE_ADDRESS+ 0x40002) +#define STB_XILINX1_REG2 (STB_FPGA_BASE_ADDRESS+ 0x40004) +#define STB_XILINX1_REG3 (STB_FPGA_BASE_ADDRESS+ 0x40006) +#define STB_XILINX1_REG4 (STB_FPGA_BASE_ADDRESS+ 0x40008) +#define STB_XILINX1_REG5 (STB_FPGA_BASE_ADDRESS+ 0x4000A) +#define STB_XILINX1_REG6 (STB_FPGA_BASE_ADDRESS+ 0x4000C) +#define STB_XILINX1_ID (STB_FPGA_BASE_ADDRESS+ 0x4000E) +#define STB_XILINX1_FLUSH (STB_FPGA_BASE_ADDRESS+ 0x4000E) +#define STB_XILINX2_REG0 (STB_FPGA_BASE_ADDRESS+ 0x80000) +#define STB_XILINX2_REG1 (STB_FPGA_BASE_ADDRESS+ 0x80002) +#define STB_XILINX2_REG2 (STB_FPGA_BASE_ADDRESS+ 0x80004) + +#define XILINX1_R0_VAL 0x2440 /* Xilinx 1 Register 0 Val */ +#define XILINX1_R1_VAL 0x0025 /* Xilinx 1 Register 1 Val */ +#define XILINX1_R2_VAL 0x0441 /* Xilinx 1 Register 2 Val */ +#define XILINX1_R3_VAL 0x0008 /* Xilinx 1 Register 3 Val */ +#define XILINX1_R4_VAL 0x0100 /* Xilinx 1 Register 4 Val */ +#define XILINX1_R5_VAL 0x6810 /* Xilinx 1 Register 5 Val */ +#define XILINX1_R6_VAL 0x0000 /* Xilinx 1 Register 6 Val */ +#if 0 +#define XILINX2_R0_VAL 0x0008 /* Xilinx 2 Register 0 Val */ +#define XILINX2_R1_VAL 0x0000 /* Xilinx 2 Register 1 Val */ +#else +#define XILINX2_R0_VAL 0x0018 /* disable IBM IrDA RxD */ +#define XILINX2_R1_VAL 0x0008 /* enable SICC MAX chip */ +#endif +#define XILINX2_R2_VAL 0x0000 /* Xilinx 2 Register 2 Val */ + +/*----------------------------------------------------------------------------+ +| HSMC BANK REGISTERS DEFINES ++----------------------------------------------------------------------------*/ +#ifdef SDRAM16MB +#define HSMC0_BR0_VAL 0x000D2D55 /* 0x1F000000-007FFFFF R/W */ +#define HSMC0_BR1_VAL 0x008D2D55 /* 0x1F800000-1FFFFFFF R/W */ +#else +#define HSMC0_BR0_VAL 0x1F0D2D55 /* 0x1F000000-007FFFFF R/W */ +#define HSMC0_BR1_VAL 0x1F8D2D55 /* 0x1F800000-1FFFFFFF R/W */ +#endif +#define HSMC1_BR0_VAL 0xA00D2D55 /* 0xA0000000-A07FFFFF R/W */ +#define HSMC1_BR1_VAL 0xA08D2D55 /* 0xA0800000-A0FFFFFF R/W */ + +/*----------------------------------------------------------------------------+ +| CACHE DEFINES ++----------------------------------------------------------------------------*/ +#define DCACHE_NLINES 128 /* no. D-cache lines */ +#define DCACHE_NBYTES 32 /* no. bytes/ D-cache line */ +#define ICACHE_NLINES 256 /* no. I-cache lines */ +#define ICACHE_NBYTES 32 /* no. bytes/ I-cache line */ +#ifdef SDRAM16MB +#define DCACHE_ENABLE 0x80000000 /* D-cache regions to enable*/ +#define ICACHE_ENABLE 0x80000001 /* I-cache regions to enable*/ +#else +#define DCACHE_ENABLE 0x18000000 /* D-cache regions to enable*/ +#define ICACHE_ENABLE 0x18000001 /* I-cache regions to enable*/ +#endif + +/*----------------------------------------------------------------------------+ +| CPU CORE SPEED CALCULATION DEFINES ++----------------------------------------------------------------------------*/ +#define GCS_LCNT 500000 /* CPU speed loop count */ +#define GCS_TROW_BYTES 8 /* no. bytes in table row */ +#define GCS_CTICK_TOL 100 /* allowable clock tick tol */ +#define GCS_NMULT 4 /* no. of core speed mults */ + + /*--------------------------------------------------------------------+ + | No. 13.5Mhz + | Clock Ticks + | based on a + | loop count Bus + | of 100,000 Speed + +--------------------------------------------------------------------*/ +gcs_lookup_table: + .int 50000, 54000000 /* 54.0 Mhz */ + .int 66667, 40500000 /* 40.5 Mhz */ + .int 54545, 49500000 /* 49.5 Mhz */ + .int 46154, 58500000 /* 58.5 Mhz */ + .int 0, 0 /* end of table flag */ + + +/*****************************************************************************+ +| XXXXXXX XXX XXX XXXXXX XXXXXXX XXXXXX XX XX XX XXXX +| XX X XX XX X XX X XX X XX XX XXX XX XXXX XX +| XX X XXX XX XX X XX XX XXXX XX XX XX XX +| XXXX X XX XXXX XXXXX XX XXXX XX XX XX +| XX X XXX XX XX X XX XX XX XXX XXXXXX XX +| XX X XX XX XX XX X XX XX XX XX XX XX XX XX +| XXXXXXX XXX XXX XXXX XXXXXXX XXX XX XX XX XX XX XXXXXXX ++*****************************************************************************/ +/****************************************************************************** +| +| Routine: INITB_EBIU0. +| +| Purpose: Initialize all the EBIU0 Bank Registers +| Parameters: None. +| Returns: None. +| +******************************************************************************/ + function_prolog(initb_ebiu0) + /*--------------------------------------------------------------------+ + | Set EBIU0 Bank 0 + +--------------------------------------------------------------------*/ + lis r10,EBIU0_BRCR0_VAL@h + ori r10,r10,EBIU0_BRCR0_VAL@l + mtdcr ebiu0_brcr0,r10 + lis r10,EBIU0_BRCRH0_VAL@h + ori r10,r10,EBIU0_BRCRH0_VAL@l + mtdcr ebiu0_brcrh0,r10 + + /*--------------------------------------------------------------------+ + | Set EBIU0 Bank 1 + +--------------------------------------------------------------------*/ + lis r10,EBIU0_BRCR1_VAL@h + ori r10,r10,EBIU0_BRCR1_VAL@l + mtdcr ebiu0_brcr1,r10 + lis r10,EBIU0_BRCRH1_VAL@h + ori r10,r10,EBIU0_BRCRH1_VAL@l + mtdcr ebiu0_brcrh1,r10 + + /*--------------------------------------------------------------------+ + | Set EBIU0 Bank 2 + +--------------------------------------------------------------------*/ + lis r10,EBIU0_BRCR2_VAL@h + ori r10,r10,EBIU0_BRCR2_VAL@l + mtdcr ebiu0_brcr2,r10 + lis r10,EBIU0_BRCRH2_VAL@h + ori r10,r10,EBIU0_BRCRH2_VAL@l + mtdcr ebiu0_brcrh2,r10 + + /*--------------------------------------------------------------------+ + | Set EBIU0 Bank 3 + +--------------------------------------------------------------------*/ + lis r10,EBIU0_BRCR3_VAL@h + ori r10,r10,EBIU0_BRCR3_VAL@l + mtdcr ebiu0_brcr3,r10 + lis r10,EBIU0_BRCRH3_VAL@h + ori r10,r10,EBIU0_BRCRH3_VAL@l + mtdcr ebiu0_brcrh3,r10 + + /*--------------------------------------------------------------------+ + | Set EBIU0 Bank 4 + +--------------------------------------------------------------------*/ + lis r10,EBIU0_BRCR4_VAL@h + ori r10,r10,EBIU0_BRCR4_VAL@l + mtdcr ebiu0_brcr4,r10 + lis r10,EBIU0_BRCRH4_VAL@h + ori r10,r10,EBIU0_BRCRH4_VAL@l + mtdcr ebiu0_brcrh4,r10 + + /*--------------------------------------------------------------------+ + | Set EBIU0 Bank 5 + +--------------------------------------------------------------------*/ + lis r10,EBIU0_BRCR5_VAL@h + ori r10,r10,EBIU0_BRCR5_VAL@l + mtdcr ebiu0_brcr5,r10 + lis r10,EBIU0_BRCRH5_VAL@h + ori r10,r10,EBIU0_BRCRH5_VAL@l + mtdcr ebiu0_brcrh5,r10 + + /*--------------------------------------------------------------------+ + | Set EBIU0 Bank 6 + +--------------------------------------------------------------------*/ + lis r10,EBIU0_BRCR6_VAL@h + ori r10,r10,EBIU0_BRCR6_VAL@l + mtdcr ebiu0_brcr6,r10 + lis r10,EBIU0_BRCRH6_VAL@h + ori r10,r10,EBIU0_BRCRH6_VAL@l + mtdcr ebiu0_brcrh6,r10 + + /*--------------------------------------------------------------------+ + | Set EBIU0 Bank 7 + +--------------------------------------------------------------------*/ + lis r10,EBIU0_BRCR7_VAL@h + ori r10,r10,EBIU0_BRCR7_VAL@l + mtdcr ebiu0_brcr7,r10 + lis r10,EBIU0_BRCRH7_VAL@h + ori r10,r10,EBIU0_BRCRH7_VAL@l + mtdcr ebiu0_brcrh7,r10 + + blr + function_epilog(initb_ebiu0) + + +/****************************************************************************** +| +| Routine: INITB_CONFIG +| +| Purpose: Configure the Vesta Evaluation Board. The following items +| will be configured: +| 1. Cross-Bar Switch. +| 2. Chip Interconnect. +| 3. Clear/reset key PPC registers. +| 4. Xilinx and GPIO Registers. +| +| Returns: None. +| +******************************************************************************/ + function_prolog(initb_config) + /*--------------------------------------------------------------------+ + | Init CROSS-BAR SWITCH + +--------------------------------------------------------------------*/ + lis r10,CBS0_CR_VAL@h /* r10 <- CBS Cntl Reg val */ + ori r10,r10,CBS0_CR_VAL@l + mtdcr cbs0_cr,r10 + + /*--------------------------------------------------------------------+ + | Init Chip-Interconnect (CIC) Registers + +--------------------------------------------------------------------*/ + lis r10,CIC0_CR_VAL@h /* r10 <- CIC Cntl Reg val */ + ori r10,r10,CIC0_CR_VAL@l + mtdcr cic0_cr,r10 + + lis r10,CIC0_SEL3_VAL@h /* r10 <- CIC SEL3 Reg val */ + ori r10,r10,CIC0_SEL3_VAL@l + mtdcr cic0_sel3,r10 + + lis r10,CIC0_VCR_VAL@h /* r10 <- CIC Vid C-Reg val */ + ori r10,r10,CIC0_VCR_VAL@l + mtdcr cic0_vcr,r10 + + /*--------------------------------------------------------------------+ + | Clear SGR and DCWR + +--------------------------------------------------------------------*/ + li r10,0x0000 + mtspr sgr,r10 + mtspr dcwr,r10 + + /*--------------------------------------------------------------------+ + | Clear/set up some machine state registers. + +--------------------------------------------------------------------*/ + li r10,0x0000 /* r10 <- 0 */ + mtdcr ebiu0_besr,r10 /* clr Bus Err Syndrome Reg */ + mtspr esr,r10 /* clr Exceptn Syndrome Reg */ + mttcr r10 /* timer control register */ + + mtdcr uic0_er,r10 /* disable all interrupts */ + + /* UIC_IIC0 | UIC_IIC1 | UIC_U0 | UIC_IR_RCV | UIC_IR_XMIT */ + lis r10, 0x00600e00@h + ori r10,r10,0x00600e00@l + mtdcr uic0_pr,r10 + + li r10,0x00000020 /* UIC_EIR1 */ + mtdcr uic0_tr,r10 + + lis r10,0xFFFF /* r10 <- 0xFFFFFFFF */ + ori r10,r10,0xFFFF /* */ + mtdbsr r10 /* clear/reset the dbsr */ + mtdcr uic0_sr,r10 /* clear pending interrupts */ + + li r10,0x1000 /* set Machine Exception bit*/ + oris r10,r10,0x2 /* set Criticl Exception bit*/ + mtmsr r10 /* change MSR */ + + /*--------------------------------------------------------------------+ + | Clear XER. + +--------------------------------------------------------------------*/ + li r10,0x0000 + mtxer r10 + + /*--------------------------------------------------------------------+ + | Init GPIO0 Registers + +--------------------------------------------------------------------*/ + lis r10, STB_GPIO0_TC@h /* Three-state control */ + ori r10,r10,STB_GPIO0_TC@l + lis r11, GPIO0_TC_VAL@h + ori r11,r11,GPIO0_TC_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_OS_0_31@h /* output select 0-31 */ + ori r10,r10,STB_GPIO0_OS_0_31@l + lis r11, GPIO0_OS_0_31_VAL@h + ori r11,r11,GPIO0_OS_0_31_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_OS_32_63@h /* output select 32-63 */ + ori r10,r10,STB_GPIO0_OS_32_63@l + lis r11, GPIO0_OS_32_63_VAL@h + ori r11,r11,GPIO0_OS_32_63_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_TS_0_31@h /* three-state select 0-31 */ + ori r10,r10,STB_GPIO0_TS_0_31@l + lis r11, GPIO0_TS_0_31_VAL@h + ori r11,r11,GPIO0_TS_0_31_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_TS_32_63@h /* three-state select 32-63 */ + ori r10,r10,STB_GPIO0_TS_32_63@l + lis r11, GPIO0_TS_32_63_VAL@h + ori r11,r11,GPIO0_TS_32_63_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_OD@h /* open drain */ + ori r10,r10,STB_GPIO0_OD@l + lis r11, GPIO0_OD_VAL@h + ori r11,r11,GPIO0_OD_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_IS_1_0_31@h /* input select 1, 0-31 */ + ori r10,r10,STB_GPIO0_IS_1_0_31@l + lis r11, GPIO0_IS_1_0_31_VAL@h + ori r11,r11,GPIO0_IS_1_0_31_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_IS_1_32_63@h /* input select 1, 32-63 */ + ori r10,r10,STB_GPIO0_IS_1_32_63@l + lis r11, GPIO0_IS_1_32_63_VAL@h + ori r11,r11,GPIO0_IS_1_32_63_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_IS_2_0_31@h /* input select 2, 0-31 */ + ori r10,r10,STB_GPIO0_IS_2_0_31@l + lis r11, GPIO0_IS_2_0_31_VAL@h + ori r11,r11,GPIO0_IS_2_0_31_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_IS_2_32_63@h /* input select 2, 32-63 */ + ori r10,r10,STB_GPIO0_IS_2_32_63@l + lis r11, GPIO0_IS_2_32_63_VAL@h + ori r11,r11,GPIO0_IS_2_32_63_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_IS_3_0_31@h /* input select 3, 0-31 */ + ori r10,r10,STB_GPIO0_IS_3_0_31@l + lis r11, GPIO0_IS_3_0_31_VAL@h + ori r11,r11,GPIO0_IS_3_0_31_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_IS_3_32_63@h /* input select 3, 32-63 */ + ori r10,r10,STB_GPIO0_IS_3_32_63@l + lis r11, GPIO0_IS_3_32_63_VAL@h + ori r11,r11,GPIO0_IS_3_32_63_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_SS_1@h /* sync select 1 */ + ori r10,r10,STB_GPIO0_SS_1@l + lis r11, GPIO0_SS_1_VAL@h + ori r11,r11,GPIO0_SS_1_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_SS_2@h /* sync select 2 */ + ori r10,r10,STB_GPIO0_SS_2@l + lis r11, GPIO0_SS_2_VAL@h + ori r11,r11,GPIO0_SS_2_VAL@l + stw r11,0(r10) + + lis r10, STB_GPIO0_SS_3@h /* sync select 3 */ + ori r10,r10,STB_GPIO0_SS_3@l + lis r11, GPIO0_SS_3_VAL@h + ori r11,r11,GPIO0_SS_3_VAL@l + stw r11,0(r10) + + /*--------------------------------------------------------------------+ + | Init Xilinx #1 Registers + +--------------------------------------------------------------------*/ + lis r10, STB_XILINX1_REG0@h /* init Xilinx1 Reg 0 */ + ori r10,r10,STB_XILINX1_REG0@l + li r11,XILINX1_R0_VAL + sth r11,0(r10) + + lis r10, STB_XILINX1_REG1@h /* init Xilinx1 Reg 1 */ + ori r10,r10,STB_XILINX1_REG1@l + li r11,XILINX1_R1_VAL + sth r11,0(r10) + + lis r10, STB_XILINX1_REG2@h /* init Xilinx1 Reg 2 */ + ori r10,r10,STB_XILINX1_REG2@l + li r11,XILINX1_R2_VAL + sth r11,0(r10) + + lis r10, STB_XILINX1_REG3@h /* init Xilinx1 Reg 3 */ + ori r10,r10,STB_XILINX1_REG3@l + li r11,XILINX1_R3_VAL + sth r11,0(r10) + + lis r10, STB_XILINX1_REG4@h /* init Xilinx1 Reg 4 */ + ori r10,r10,STB_XILINX1_REG4@l + li r11,XILINX1_R4_VAL + sth r11,0(r10) + + lis r10, STB_XILINX1_REG5@h /* init Xilinx1 Reg 5 */ + ori r10,r10,STB_XILINX1_REG5@l + li r11,XILINX1_R5_VAL + sth r11,0(r10) + + lis r10, STB_XILINX1_REG6@h /* init Xilinx1 Reg 6 */ + ori r10,r10,STB_XILINX1_REG6@l + li r11,XILINX1_R6_VAL + sth r11,0(r10) + + lis r10, STB_XILINX1_FLUSH@h /* latch registers in Xilinx*/ + ori r10,r10,STB_XILINX1_FLUSH@l + li r11,0x0000 + sth r11,0(r10) + + /*--------------------------------------------------------------------+ + | Init Xilinx #2 Registers + +--------------------------------------------------------------------*/ + lis r10, STB_XILINX2_REG0@h /* init Xilinx2 Reg 0 */ + ori r10,r10,STB_XILINX2_REG0@l + li r11,XILINX2_R0_VAL + sth r11,0(r10) + + lis r10, STB_XILINX2_REG1@h /* init Xilinx2 Reg 1 */ + ori r10,r10,STB_XILINX2_REG1@l + li r11,XILINX2_R1_VAL + sth r11,0(r10) + + lis r10, STB_XILINX2_REG2@h /* init Xilinx2 Reg 2 */ + ori r10,r10,STB_XILINX2_REG2@l + li r11,XILINX2_R2_VAL + sth r11,0(r10) + + blr + function_epilog(initb_config) + + +/****************************************************************************** +| +| Routine: INITB_HSMC0. +| +| Purpose: Initialize the HSMC0 Registers for SDRAM +| Parameters: None. +| Returns: R3 = 0: Successful +| = -1: Unsuccessful, SDRAM did not reset properly. +| +******************************************************************************/ + function_prolog(initb_hsmc0) + mflr r0 /* Save return addr */ + + /*--------------------------------------------------------------------+ + | Set Global SDRAM Controller to recommended default + +--------------------------------------------------------------------*/ + lis r10,0x6C00 + ori r10,r10,0x0000 + mtdcr hsmc0_gr,r10 + + /*--------------------------------------------------------------------+ + | Set HSMC0 Data Register to recommended default + +--------------------------------------------------------------------*/ + lis r10,0x0037 + ori r10,r10,0x0000 + mtdcr hsmc0_data,r10 + + /*--------------------------------------------------------------------+ + | Init HSMC0 Bank Register 0 + +--------------------------------------------------------------------*/ + lis r10,HSMC0_BR0_VAL@h + ori r10,r10,HSMC0_BR0_VAL@l + mtdcr hsmc0_br0,r10 + + /*--------------------------------------------------------------------+ + | Init HSMC0 Bank Register 1 + +--------------------------------------------------------------------*/ + lis r10,HSMC0_BR1_VAL@h + ori r10,r10,HSMC0_BR1_VAL@l + mtdcr hsmc0_br1,r10 + + /*--------------------------------------------------------------------+ + | Set HSMC0 Control Reg 0 + +--------------------------------------------------------------------*/ + lis r10,0x8077 /* PRECHARGE ALL DEVICE BKS */ + ori r10,r10,0x0000 + mtdcr hsmc0_cr0,r10 + li r3,0x0000 + bl hsmc_cr_wait /* wait for op completion */ + cmpwi cr0,r3,0x0000 + bne cr0,hsmc0_err + + lis r10,0x8078 /* AUTO-REFRESH */ + ori r10,r10,0x0000 + mtdcr hsmc0_cr0,r10 + li r3,0x0000 + bl hsmc_cr_wait /* wait for op completion */ + cmpwi cr0,r3,0x0000 + bne cr0,hsmc0_err + + lis r10,0x8070 /* PROG MODE W/DATA REG VAL */ + ori r10,r10,0x8000 + mtdcr hsmc0_cr0,r10 + li r3,0x0000 + bl hsmc_cr_wait /* wait for op completion */ + cmpwi cr0,r3,0x0000 + bne hsmc0_err + + /*--------------------------------------------------------------------+ + | Set HSMC0 Control Reg 1 + +--------------------------------------------------------------------*/ + lis r10,0x8077 /* PRECHARGE ALL DEVICE BKS */ + ori r10,r10,0x0000 + mtdcr hsmc0_cr1,r10 + li r3,0x0001 + bl hsmc_cr_wait /* wait for op completion */ + cmpwi cr0,r3,0x0000 + bne cr0,hsmc0_err + + lis r10,0x8078 /* AUTO-REFRESH */ + ori r10,r10,0x0000 + mtdcr hsmc0_cr1,r10 + li r3,0x0001 + bl hsmc_cr_wait /* wait for op completion */ + cmpwi cr0,r3,0x0000 + bne cr0,hsmc0_err + + lis r10,0x8070 /* PROG MODE W/DATA REG VAL */ + ori r10,r10,0x8000 + mtdcr hsmc0_cr1,r10 + li r3,0x0001 + bl hsmc_cr_wait /* wait for op completion */ + cmpwi cr0,r3,0x0000 + bne cr0,hsmc0_err + + /*--------------------------------------------------------------------+ + | Set HSMC0 Refresh Register + +--------------------------------------------------------------------*/ + lis r10,0x0FE1 + ori r10,r10,0x0000 + mtdcr hsmc0_crr,r10 + li r3,0 + +hsmc0_err: + mtlr r0 + blr + function_epilog(initb_hsmc0) + + +/****************************************************************************** +| +| Routine: INITB_HSMC1. +| +| Purpose: Initialize the HSMC1 Registers for SDRAM +| Parameters: None. +| Returns: R3 = 0: Successful +| = -1: Unsuccessful, SDRAM did not reset properly. +| +******************************************************************************/ + function_prolog(initb_hsmc1) + mflr r0 /* Save return addr */ + + /*--------------------------------------------------------------------+ + | Set Global SDRAM Controller to recommended default + +--------------------------------------------------------------------*/ + lis r10,0x6C00 + ori r10,r10,0x0000 + mtdcr hsmc1_gr,r10 + + /*--------------------------------------------------------------------+ + | Set HSMC1 Data Register to recommended default + +--------------------------------------------------------------------*/ + lis r10,0x0037 + ori r10,r10,0x0000 + mtdcr hsmc1_data,r10 + + /*--------------------------------------------------------------------+ + | Init HSMC1 Bank Register 0 + +--------------------------------------------------------------------*/ + lis r10,HSMC1_BR0_VAL@h + ori r10,r10,HSMC1_BR0_VAL@l + mtdcr hsmc1_br0,r10 + + /*--------------------------------------------------------------------+ + | Init HSMC1 Bank Register 1 + +--------------------------------------------------------------------*/ + lis r10,HSMC1_BR1_VAL@h + ori r10,r10,HSMC1_BR1_VAL@l + mtdcr hsmc1_br1,r10 + + /*--------------------------------------------------------------------+ + | Set HSMC1 Control Reg 0 + +--------------------------------------------------------------------*/ + lis r10,0x8077 /* PRECHARGE ALL DEVICE BANKS */ + ori r10,r10,0x0000 + mtdcr hsmc1_cr0,r10 + li r3,0x0002 + bl hsmc_cr_wait /* wait for operation completion */ + cmpwi cr0,r3,0x0000 + bne hsmc1_err + + lis r10,0x8078 /* AUTO-REFRESH */ + ori r10,r10,0x0000 + mtdcr hsmc1_cr0,r10 + li r3,0x0002 + bl hsmc_cr_wait /* wait for operation completion */ + cmpwi cr0,r3,0x0000 + bne hsmc1_err + + lis r10,0x8070 /* PROGRAM MODE W/DATA REG VALUE */ + ori r10,r10,0x8000 + mtdcr hsmc1_cr0,r10 + li r3,0x0002 + bl hsmc_cr_wait /* wait for operation completion */ + cmpwi cr0,r3,0x0000 + bne hsmc1_err + + /*--------------------------------------------------------------------+ + | Set HSMC1 Control Reg 1 + +--------------------------------------------------------------------*/ + lis r10,0x8077 /* PRECHARGE ALL DEVICE BKS */ + ori r10,r10,0x0000 + mtdcr hsmc1_cr1,r10 + li r3,0x0003 + bl hsmc_cr_wait /* wait for op completion */ + cmpwi cr0,r3,0x0000 + bne hsmc1_err + + lis r10,0x8078 /* AUTO-REFRESH */ + ori r10,r10,0x0000 + mtdcr hsmc1_cr1,r10 + li r3,0x0003 + bl hsmc_cr_wait /* wait for op completion */ + cmpwi cr0,r3,0x0000 + bne hsmc1_err + + lis r10,0x8070 /* PROG MODE W/DATA REG VAL */ + ori r10,r10,0x8000 + mtdcr hsmc1_cr1,r10 + li r3,0x0003 + bl hsmc_cr_wait /* wait for op completion */ + cmpwi cr0,r3,0x0000 + bne hsmc1_err + + /*--------------------------------------------------------------------+ + | Set HSMC1 Refresh Register + +--------------------------------------------------------------------*/ + lis r10,0x0FE1 + ori r10,r10,0x0000 + mtdcr hsmc1_crr,r10 + xor r3,r3,r3 + +hsmc1_err: + mtlr r0 + blr + function_epilog(initb_hsmc1) + + +/****************************************************************************** +| +| Routine: INITB_CACHE +| +| Purpose: This routine will enable Data and Instruction Cache. +| The Data Cache is an 8K two-way set associative and the +| Instruction Cache is an 16K two-way set associative cache. +| +| Parameters: None. +| +| Returns: None. +| +******************************************************************************/ + function_prolog(initb_cache) + mflr r0 /* Save return addr */ + + bl initb_Dcache /* enable D-Cache */ + bl initb_Icache /* enable I-Cache */ + + mtlr r0 + blr + function_epilog(initb_cache) + + +/****************************************************************************** +| +| Routine: INITB_DCACHE +| +| Purpose: This routine will invalidate all data in the Data Cache and +| then enable D-Cache. If cache is enabled already, the D-Cache +| will be flushed before the data is invalidated. +| +| Parameters: None. +| +| Returns: None. +| +******************************************************************************/ + function_prolog(initb_Dcache) + /*--------------------------------------------------------------------+ + | Flush Data Cache if enabled + +--------------------------------------------------------------------*/ + mfdccr r10 /* r10 <- DCCR */ + isync /* ensure prev insts done */ + cmpwi r10,0x00 + beq ic_dcinv /* D-cache off, invalidate */ + + /*--------------------------------------------------------------------+ + | Data Cache enabled, force known memory addresses to be Cached + +--------------------------------------------------------------------*/ + lis r10,HSMC0_BR0_VAL@h /* r10 <- first memory loc */ + andis. r10,r10,0xFFF0 + li r11,DCACHE_NLINES /* r11 <- # A-way addresses */ + addi r11,r11,DCACHE_NLINES /* r11 <- # B-way addresses */ + mtctr r11 /* set loop counter */ + +ic_dcload: + lwz r12,0(r10) /* force cache of address */ + addi r10,r10,DCACHE_NBYTES /* r10 <- next memory loc */ + bdnz ic_dcload + sync /* ensure prev insts done */ + isync + + /*--------------------------------------------------------------------+ + | Flush the known memory addresses from Cache + +--------------------------------------------------------------------*/ + lis r10,HSMC0_BR0_VAL@h /* r10 <- first memory loc */ + andis. r10,r10,0xFFF0 + mtctr r11 /* set loop counter */ + +ic_dcflush: + dcbf 0,r10 /* flush D-cache line */ + addi r10,r10,DCACHE_NBYTES /* r10 <- next memory loc */ + bdnz ic_dcflush + sync /* ensure prev insts done */ + isync + + /*--------------------------------------------------------------------+ + | Disable then invalidate Data Cache + +--------------------------------------------------------------------*/ + li r10,0 /* r10 <- 0 */ + mtdccr r10 /* disable the D-Cache */ + isync /* ensure prev insts done */ + +ic_dcinv: + li r10,0 /* r10 <- line address */ + li r11,DCACHE_NLINES /* r11 <- # lines in cache */ + mtctr r11 /* set loop counter */ + +ic_dcloop: + dccci 0,r10 /* invalidate A/B cache lns */ + addi r10,r10,DCACHE_NBYTES /* bump to next line */ + bdnz ic_dcloop + sync /* ensure prev insts done */ + isync + + /*--------------------------------------------------------------------+ + | Enable Data Cache + +--------------------------------------------------------------------*/ + lis r10,DCACHE_ENABLE@h /* r10 <- D-cache enable msk*/ + ori r10,r10,DCACHE_ENABLE@l + mtdccr r10 + sync /* ensure prev insts done */ + isync + + blr + function_epilog(initb_Dcache) + + +/****************************************************************************** +| +| Routine: INITB_ICACHE +| +| Purpose: This routine will invalidate all data in the Instruction +| Cache then enable I-Cache. +| +| Parameters: None. +| +| Returns: None. +| +******************************************************************************/ + function_prolog(initb_Icache) + /*--------------------------------------------------------------------+ + | Invalidate Instruction Cache + +--------------------------------------------------------------------*/ + li r10,0 /* r10 <- lines address */ + iccci 0,r10 /* invalidate all I-cache */ + sync /* ensure prev insts done */ + isync + + /*--------------------------------------------------------------------+ + | Enable Instruction Cache + +--------------------------------------------------------------------*/ + lis r10,ICACHE_ENABLE@h /* r10 <- I-cache enable msk*/ + ori r10,r10,ICACHE_ENABLE@l + mticcr r10 + sync /* ensure prev insts done */ + isync + + blr + function_epilog(initb_Icache) + +#if 0 +/****************************************************************************** +| +| Routine: INITB_GET_CSPD +| +| Purpose: Determine the CPU Core Speed. The 13.5 Mhz Time Base +| Counter (TBC) is used to measure a conditional branch +| instruction. +| +| Parameters: R3 = Address of Bus Speed +| R4 = Address of Core Speed +| +| Returns: (R3) = >0: Bus Speed. +| 0: Bus Speed not found in Look-Up Table. +| (R4) = >0: Core Speed. +| 0: Core Speed not found in Look-Up Table. +| +| Note: 1. This routine assumes the bdnz branch instruction takes +| two instruction cycles to complete. +| 2. This routine must be called before interrupts are enabled. +| +******************************************************************************/ + function_prolog(initb_get_cspd) + mflr r0 /* Save return address */ + /*--------------------------------------------------------------------+ + | Set-up timed loop + +--------------------------------------------------------------------*/ + lis r9,gcs_time_loop@h /* r9 <- addr loop instr */ + ori r9,r9,gcs_time_loop@l + lis r10,GCS_LCNT@h /* r10 <- loop count */ + ori r10,r10,GCS_LCNT@l + mtctr r10 /* ctr <- loop count */ + lis r11,STB_TIMERS_TBC@h /* r11 <- TBC register addr */ + ori r11,r11,STB_TIMERS_TBC@l + li r12,0 /* r12 <- 0 */ + + /*--------------------------------------------------------------------+ + | Cache timed-loop instruction + +--------------------------------------------------------------------*/ + icbt 0,r9 + sync + isync + + /*--------------------------------------------------------------------+ + | Get number of 13.5 Mhz cycles to execute time-loop + +--------------------------------------------------------------------*/ + stw r12,0(r11) /* reset TBC */ +gcs_time_loop: + bdnz+ gcs_time_loop /* force branch pred taken */ + lwz r5,0(r11) /* r5 <- num 13.5 Mhz ticks */ + li r6,5 /* LUT based on 1/5th the...*/ + divw r5,r5,r6 /*..loop count used */ + sync + isync + + /*--------------------------------------------------------------------+ + | Look-up core speed based on TBC value + +--------------------------------------------------------------------*/ + lis r6,gcs_lookup_table@h /* r6 <- pts at core spd LUT*/ + ori r6,r6,gcs_lookup_table@l + bl gcs_cspd_lookup /* find core speed in LUT */ + + mtlr r0 /* set return address */ + blr + function_epilog(initb_get_cspd) + +#endif +/*****************************************************************************+ +| XXXX XX XX XXXXXX XXXXXXX XXXXXX XX XX XX XXXX +| XX XXX XX X XX X XX X XX XX XXX XX XXXX XX +| XX XXXX XX XX XX X XX XX XXXX XX XX XX XX +| XX XX XXXX XX XXXX XXXXX XX XXXX XX XX XX +| XX XX XXX XX XX X XX XX XX XXX XXXXXX XX +| XX XX XX XX XX X XX XX XX XX XX XX XX XX +| XXXX XX XX XXXX XXXXXXX XXX XX XX XX XX XX XXXXXXX ++*****************************************************************************/ +/****************************************************************************** +| +| Routine: HSMC_CR_WAIT +| +| Purpose: Wait for the HSMC Control Register (bits 12-16) to be reset +| after an auto-refresh, pre-charge or program mode register +| command execution. +| +| Parameters: R3 = HSMC Control Register ID. +| 0: HSMC0 CR0 +| 1: HSMC0 CR1 +| 2: HSMC1 CR0 +| 3: HSMC1 CR1 +| +| Returns: R3 = 0: Successful +| -1: Unsuccessful +| +******************************************************************************/ +hsmc_cr_wait: + + li r11,10 /* r11 <- retry counter */ + mtctr r11 /* set retry counter */ + mr r11,r3 /* r11 <- HSMC CR reg id */ + +hsmc_cr_rep: + bdz hsmc_cr_err /* branch if max retries hit*/ + + /*--------------------------------------------------------------------+ + | GET HSMCx_CRx value based on HSMC Control Register ID + +--------------------------------------------------------------------*/ +try_hsmc0_cr0: /* CHECK IF ID=HSMC0 CR0 REG*/ + cmpwi cr0,r11,0x0000 + bne cr0,try_hsmc0_cr1 + mfdcr r10,hsmc0_cr0 /* r11 <- HSMC0 CR0 value */ + b hsmc_cr_read + +try_hsmc0_cr1: /* CHECK IF ID=HSMC0 CR1 REG*/ + cmpwi cr0,r11,0x0001 + bne cr0,try_hsmc1_cr0 + mfdcr r10,hsmc0_cr1 /* r10 <- HSMC0 CR1 value */ + b hsmc_cr_read + +try_hsmc1_cr0: /* CHECK IF ID=HSMC1 CR0 REG*/ + cmpwi cr0,r11,0x0002 + bne cr0,try_hsmc1_cr1 + mfdcr r10,hsmc1_cr0 /* r10 <- HSMC1 CR0 value */ + b hsmc_cr_read + +try_hsmc1_cr1: /* CHECK IF ID=HSMC1 CR1 REG*/ + cmpwi cr0,r11,0x0003 + bne cr0,hsmc_cr_err + mfdcr r10,hsmc1_cr1 /* r10 <- HSMC1 CR1 value */ + + /*--------------------------------------------------------------------+ + | Check if HSMC CR register was reset after command execution + +--------------------------------------------------------------------*/ +hsmc_cr_read: + lis r12,0x000F /* create "AND" mask */ + ori r12,r12,0x8000 + and. r10,r10,r12 /* r10 <- HSMC CR bits 12-16*/ + bne cr0,hsmc_cr_rep /* wait for bits to reset */ + li r3,0 /* set return code = success*/ + b hsmc_cr_done + +hsmc_cr_err: /* ERROR: SDRAM didn't reset*/ + li r3,-1 /* set RC=unsuccessful */ + +hsmc_cr_done: + blr + +#if 0 +/****************************************************************************** +| +| Routine: GCS_CSPD_LOOKUP +| +| Purpose: Uses the number of 13.5 Mhz clock ticks found after executing +| the branch instruction time loop to look-up the CPU Core Speed +| in the Core Speed Look-up Table. +| +| Parameters: R3 = Address of Bus Speed +| R4 = Address of Core Speed +| R5 = Number of 13.5 Mhz clock ticks found in time loop. +| R6 = Pointer to Core-Speed Look-Up Table +| +| Returns: (R3) = >0: Bus Speed. +| 0: Bus Speed not found in Look-Up Table. +| (R4) = >0: Core Speed. +| 0: Core Speed not found in Look-Up Table. +| +| Note: Core Speed = Bus Speed * Mult Factor (1-4x). +| +******************************************************************************/ +gcs_cspd_lookup: + + li r9,1 /* r9 <- core speed mult */ + /*--------------------------------------------------------------------+ + | Get theoritical number 13.5 Mhz ticks for a given Bus Speed from + | Look-up Table. Check all mult factors to determine if calculated + | value matches theoretical value (within a tolerance). + +--------------------------------------------------------------------*/ +gcs_cspd_loop: + lwz r10,0(r6) /* r10 <- no. ticks from LUT*/ + divw r10,r10,r9 /* r10 <- div mult (1-4x) */ + subi r11,r10,GCS_CTICK_TOL /* r11 <- no. tks low range */ + addi r12,r10,GCS_CTICK_TOL /* r12 <- no. tks high range*/ + + cmpw cr0,r5,r11 /* calc value within range? */ + blt gcs_cspd_retry /* less than low range */ + cmpw cr0,r5,r12 + bgt gcs_cspd_retry /* greater than high range */ + b gcs_cspd_fnd /* calc value within range */ + + /*--------------------------------------------------------------------+ + | SO FAR CORE SPEED NOT FOUND: Check next mult factor + +--------------------------------------------------------------------*/ +gcs_cspd_retry: + addi r9,r9,1 /* bump mult factor (1-4x) */ + cmpwi cr0,r9,GCS_NMULT + ble gcs_cspd_loop + + /*--------------------------------------------------------------------+ + | SO FAR CORE SPEED NOT FOUND: Point at next Bus Speed in LUT + +--------------------------------------------------------------------*/ + li r9,1 /* reset mult factor */ + addi r6,r6,GCS_TROW_BYTES /* point at next table entry*/ + lwz r10,0(r6) + cmpwi cr0,r10,0 /* check for EOT flag */ + bne gcs_cspd_loop + + /*--------------------------------------------------------------------+ + | COMPUTE CORE SPEED AND GET BUS SPEED FROM LOOK-UP TABLE + +--------------------------------------------------------------------*/ +gcs_cspd_fnd: + lwz r5,4(r6) /* r5 <- Bus Speed in LUT */ + mullw r6,r5,r9 /* r6 <- Core speed */ + stw r5,0(r3) /* (r3) <- Bus Speed */ + stw r6,0(r4) /* (r4) <- Core Speed */ + + blr +#endif |