diff options
Diffstat (limited to 'arch/ppc/boot/simple/Makefile')
| -rw-r--r-- | arch/ppc/boot/simple/Makefile | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile new file mode 100644 index 00000000000..d8d801fcee1 --- /dev/null +++ b/arch/ppc/boot/simple/Makefile @@ -0,0 +1,252 @@ +# This is far from simple, but I couldn't think of a good name. This is +# for making the 'zImage' or 'zImage.initrd' on a number of targets. +# +# Author: Tom Rini <trini@mvista.com> +# +# Notes: +# (1) For machines that do not want to use the ELF image directly (including +# stripping just the ELF header off), they must set the variables +# zimage-$(CONFIG_MACHINE) and zimagerd-$(CONFIG_MACHINE) to the target +# that produces the desired image and they must set end-$(CONFIG_MACHINE) +# to what will be suffixed to the image filename. +# (2) Regardless of (1), to have the resulting image be something other +# than 'zImage.elf', set end-$(CONFIG_MACHINE) to be the suffix used for +# the zImage, znetboot, and znetbootrd targets. +# (3) For machine targets which use the mktree program, you can optionally +# set entrypoint-$(CONFIG_MACHINE) to the location which the image should be +# loaded at. The optimal setting for entrypoint-$(CONFIG_MACHINE) is the link +# address. +# (4) It is advisable to pass in the memory size using BI_MEMSIZE and +# get_mem_size(), which is memory controller dependent. Add in the correct +# XXX_memory.o file for this to work, as well as editing the +# misc-$(CONFIG_MACHINE) variable. + +boot := arch/ppc/boot +common := $(boot)/common +utils := $(boot)/utils +bootlib := $(boot)/lib +images := $(boot)/images +of1275 := $(boot)/of1275 +tftpboot := /tftpboot + +# Normally, we use the 'misc.c' file for decompress_kernel and +# whatnot. Sometimes we need to override this however. +misc-y := misc.o + +# Normally, we have our images end in .elf, but something we want to +# change this. +end-y := elf + +# Additionally, we normally don't need to mess with the L2 / L3 caches +# if present on 'classic' PPC. +cacheflag-y := -DCLEAR_CACHES="" +# This file will flush / disable the L2, and L3 if present. +clear_L2_L3 := $(srctree)/$(boot)/simple/clear.S + +# +# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig +# for definition of what platform each config option refer to. +#---------------------------------------------------------------------------- + zimage-$(CONFIG_CPCI690) := zImage-STRIPELF +zimageinitrd-$(CONFIG_CPCI690) := zImage.initrd-STRIPELF + extra.o-$(CONFIG_CPCI690) := misc-cpci690.o + end-$(CONFIG_CPCI690) := cpci690 + cacheflag-$(CONFIG_CPCI690) := -include $(clear_L2_L3) + + zimage-$(CONFIG_IBM_OPENBIOS) := zImage-TREE +zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE + end-$(CONFIG_IBM_OPENBIOS) := treeboot + misc-$(CONFIG_IBM_OPENBIOS) := misc-embedded.o + + end-$(CONFIG_EMBEDDEDBOOT) := embedded + misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o + + zimage-$(CONFIG_EBONY) := zImage-TREE +zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE + end-$(CONFIG_EBONY) := ebony + entrypoint-$(CONFIG_EBONY) := 0x01000000 + extra.o-$(CONFIG_EBONY) := openbios.o + + zimage-$(CONFIG_LUAN) := zImage-TREE +zimageinitrd-$(CONFIG_LUAN) := zImage.initrd-TREE + end-$(CONFIG_LUAN) := luan + entrypoint-$(CONFIG_LUAN) := 0x01000000 + extra.o-$(CONFIG_LUAN) := pibs.o + + zimage-$(CONFIG_OCOTEA) := zImage-TREE +zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE + end-$(CONFIG_OCOTEA) := ocotea + entrypoint-$(CONFIG_OCOTEA) := 0x01000000 + extra.o-$(CONFIG_OCOTEA) := pibs.o + + extra.o-$(CONFIG_EV64260) := misc-ev64260.o + end-$(CONFIG_EV64260) := ev64260 + cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3) + + extra.o-$(CONFIG_CHESTNUT) := misc-chestnut.o + end-$(CONFIG_CHESTNUT) := chestnut + + zimage-$(CONFIG_GEMINI) := zImage-STRIPELF +zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF + end-$(CONFIG_GEMINI) := gemini + + extra.o-$(CONFIG_K2) := prepmap.o + end-$(CONFIG_K2) := k2 + cacheflag-$(CONFIG_K2) := -include $(clear_L2_L3) + + extra.o-$(CONFIG_KATANA) := misc-katana.o + end-$(CONFIG_KATANA) := katana + cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3) + + extra.o-$(CONFIG_RADSTONE_PPC7D) := misc-radstone_ppc7d.o + end-$(CONFIG_RADSTONE_PPC7D) := radstone_ppc7d + cacheflag-$(CONFIG_RADSTONE_PPC7D) := -include $(clear_L2_L3) + +# kconfig 'feature', only one of these will ever be 'y' at a time. +# The rest will be unset. +motorola := $(CONFIG_MCPN765)$(CONFIG_MVME5100)$(CONFIG_PRPMC750) \ +$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS) +motorola := $(strip $(motorola)) +pcore := $(CONFIG_PCORE)$(CONFIG_POWERPMC250) + + zimage-$(motorola) := zImage-PPLUS +zimageinitrd-$(motorola) := zImage.initrd-PPLUS + end-$(motorola) := pplus + +# Overrides previous assingment + extra.o-$(CONFIG_PPLUS) := prepmap.o + extra.o-$(CONFIG_LOPEC) := mpc10x_memory.o + + zimage-$(pcore) := zImage-STRIPELF +zimageinitrd-$(pcore) := zImage.initrd-STRIPELF + extra.o-$(pcore) := chrpmap.o + end-$(pcore) := pcore + cacheflag-$(pcore) := -include $(clear_L2_L3) + + zimage-$(CONFIG_PPC_PREP) := zImage-PPLUS +zimageinitrd-$(CONFIG_PPC_PREP) := zImage.initrd-PPLUS + extra.o-$(CONFIG_PPC_PREP) := prepmap.o + misc-$(CONFIG_PPC_PREP) += misc-prep.o mpc10x_memory.o + end-$(CONFIG_PPC_PREP) := prep + + end-$(CONFIG_SANDPOINT) := sandpoint + cacheflag-$(CONFIG_SANDPOINT) := -include $(clear_L2_L3) + + zimage-$(CONFIG_SPRUCE) := zImage-TREE +zimageinitrd-$(CONFIG_SPRUCE) := zImage.initrd-TREE + end-$(CONFIG_SPRUCE) := spruce + entrypoint-$(CONFIG_SPRUCE) := 0x00800000 + misc-$(CONFIG_SPRUCE) += misc-spruce.o + + zimage-$(CONFIG_LITE5200) := zImage-STRIPELF +zimageinitrd-$(CONFIG_LITE5200) := zImage.initrd-STRIPELF + end-$(CONFIG_LITE5200) := lite5200 + cacheflag-$(CONFIG_LITE5200) := -include $(clear_L2_L3) + + +# SMP images should have a '.smp' suffix. + end-$(CONFIG_SMP) := $(end-y).smp + +# This is a treeboot that needs init functions until the +# boot rom is sorted out (i.e. this is short lived) +extra-aflags-$(CONFIG_REDWOOD_4) := -Wa,-m405 +extra.o-$(CONFIG_REDWOOD_4) := rw4/rw4_init.o rw4/rw4_init_brd.o +EXTRA_AFLAGS := $(extra-aflags-y) +# head.o needs to get the cacheflags defined. +AFLAGS_head.o += $(cacheflag-y) + +# Linker args. This specifies where the image will be run at. +LD_ARGS := -T $(srctree)/$(boot)/ld.script \ + -Ttext $(CONFIG_BOOT_LOAD) -Bstatic +OBJCOPY_ARGS := -O elf32-powerpc + +# head.o and relocate.o must be at the start. +boot-y := head.o relocate.o $(extra.o-y) $(misc-y) +boot-$(CONFIG_40x) += embed_config.o +boot-$(CONFIG_8xx) += embed_config.o +boot-$(CONFIG_8260) += embed_config.o +boot-$(CONFIG_BSEIP) += iic.o +boot-$(CONFIG_MBX) += iic.o pci.o qspan_pci.o +boot-$(CONFIG_MV64X60) += misc-mv64x60.o +boot-$(CONFIG_RPXCLASSIC) += iic.o pci.o qspan_pci.o +boot-$(CONFIG_RPXLITE) += iic.o +# Different boards need different serial implementations. +ifeq ($(CONFIG_SERIAL_CPM_CONSOLE),y) +boot-$(CONFIG_8xx) += m8xx_tty.o +boot-$(CONFIG_8260) += m8260_tty.o +endif +boot-$(CONFIG_SERIAL_MPC52xx_CONSOLE) += mpc52xx_tty.o +boot-$(CONFIG_SERIAL_MPSC_CONSOLE) += mv64x60_tty.o + +LIBS := $(common)/lib.a $(bootlib)/lib.a +ifeq ($(CONFIG_PPC_PREP),y) +LIBS += $(of1275)/lib.a +endif + +OBJS := $(addprefix $(obj)/,$(boot-y)) + +# Tools +MKBUGBOOT := $(utils)/mkbugboot +MKPREP := $(utils)/mkprep +MKTREE := $(utils)/mktree + +targets := dummy.o + +$(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ + $(images)/vmlinux.gz $(obj)/dummy.o + $(OBJCOPY) $(OBJCOPY_ARGS) \ + --add-section=.image=$(images)/vmlinux.gz \ + --set-section-flags=.image=contents,alloc,load,readonly,data \ + $(obj)/dummy.o $(obj)/image.o + $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) + $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ + -R .stabstr -R .ramdisk -R .sysmap + +$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ + $(images)/vmlinux.gz $(obj)/dummy.o + $(OBJCOPY) $(OBJCOPY_ARGS) \ + --add-section=.ramdisk=$(images)/ramdisk.image.gz \ + --set-section-flags=.ramdisk=contents,alloc,load,readonly,data \ + --add-section=.image=$(images)/vmlinux.gz \ + --set-section-flags=.image=contents,alloc,load,readonly,data \ + $(obj)/dummy.o $(obj)/image.o + $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) + $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ + -R .stabstr -R .sysmap + +# Sort-of dummy rules, that let us format the image we want. +zImage: $(images)/$(zimage-y) $(obj)/zvmlinux + cp -f $(obj)/zvmlinux $(images)/zImage.elf + rm -f $(obj)/zvmlinux + +zImage.initrd: $(images)/$(zimageinitrd-y) $(obj)/zvmlinux.initrd + cp -f $(obj)/zvmlinux.initrd $(images)/zImage.initrd.elf + rm -f $(obj)/zvmlinux.initrd + +znetboot: zImage + cp $(images)/zImage.$(end-y) $(tftpboot)/zImage.$(end-y) + +znetboot.initrd: zImage.initrd + cp $(images)/zImage.initrd.$(end-y) $(tftpboot)/zImage.initrd.$(end-y) + +$(images)/zImage-STRIPELF: $(obj)/zvmlinux + dd if=$(obj)/zvmlinux of=$(images)/zImage.$(end-y) skip=64 bs=1k + +$(images)/zImage.initrd-STRIPELF: $(obj)/zvmlinux.initrd + dd if=$(obj)/zvmlinux.initrd of=$(images)/zImage.initrd.$(end-y) \ + skip=64 bs=1k + +$(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE) + $(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(ENTRYPOINT) + +$(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE) + $(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \ + $(ENTRYPOINT) + +$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT) + $(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y) + $(MKBUGBOOT) $(obj)/zvmlinux $(images)/zImage.bugboot + +$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(MKPREP) $(MKBUGBOOT) + $(MKPREP) -pbp $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) + $(MKBUGBOOT) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.bugboot |