diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8548cds.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8548cds.dts | 505 |
1 files changed, 122 insertions, 383 deletions
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index a17a5572fb7..07b8dae0f46 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -9,13 +9,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8548si-pre.dtsi" / { model = "MPC8548CDS"; compatible = "MPC8548CDS", "MPC85xxCDS"; - #address-cells = <1>; - #size-cells = <1>; aliases { ethernet0 = &enet0; @@ -29,76 +27,19 @@ pci2 = &pci2; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8548@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot - bus-frequency = <0>; // 166 MHz - clock-frequency = <0>; // 825 MHz, from uboot - next-level-cache = <&L2>; - }; - }; - memory { device_type = "memory"; - reg = <0x0 0x8000000>; // 128M at 0x0 + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 }; - soc8548@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8548-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8548-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; + lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + }; - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8548-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; + soc: soc8548@e0000000 { + ranges = <0 0x0 0xe0000000 0x100000>; i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; @@ -116,351 +57,178 @@ }; i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <5 1 0 0>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <5 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupts = <5 1 0 0>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupts = <5 1 0 0>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet3: ethernet@27000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <3>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - ranges = <0x0 0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; }; - global-utilities@e0000 { //global utilities reg - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; }; pci0: pci@e0008000 { + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x4 (PCIX Slot 2) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x5 (PCIX Slot 3) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 /* IDSEL 0x6 (PCIX Slot 4) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDSEL 0x8 (PCIX Slot 5) */ - 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0xC (Tsi310 bridge) */ - 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x14 (Slot 2) */ - 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x15 (Slot 3) */ - 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 /* IDSEL 0x16 (Slot 4) */ - 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 - 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 - 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 - 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 + 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDSEL 0x18 (Slot 5) */ - 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; + 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; pci_bridge@1c { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x00 (PrPMC Site) */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x04 (VIA chip) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x05 (8139) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 /* IDSEL 0x06 (Slot 6) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDESL 0x07 (Slot 7) */ - 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 - 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>; + 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 + 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; reg = <0xe000 0x0 0x0 0x0 0x0>; #interrupt-cells = <1>; @@ -492,7 +260,7 @@ #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; - interrupts = <0 1>; + interrupts = <0 1 0 0>; interrupt-parent = <&mpic>; }; @@ -505,56 +273,25 @@ }; pci1: pci@e0009000 { + reg = <0 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <25 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0009000 0x1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; }; pci2: pcie@e000a000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x0 (PEX) */ - 00000 0x0 0x0 0x1 &mpic 0x0 0x1 - 00000 0x0 0x0 0x2 &mpic 0x1 0x1 - 00000 0x0 0x0 0x3 &mpic 0x2 0x1 - 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <26 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; - clock-frequency = <33333333>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; + reg = <0 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -565,3 +302,5 @@ }; }; }; + +/include/ "fsl/mpc8548si-post.dtsi" |