summaryrefslogtreecommitdiff
path: root/arch/i386/kernel/cpu/cpufreq
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/cpu/cpufreq')
-rw-r--r--arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c39
-rw-r--r--arch/i386/kernel/cpu/cpufreq/longhaul.c186
-rw-r--r--arch/i386/kernel/cpu/cpufreq/longhaul.h48
-rw-r--r--arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c42
4 files changed, 240 insertions, 75 deletions
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index e6ea00edcb5..ea19d091fd4 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -32,6 +32,7 @@
#include <linux/seq_file.h>
#include <linux/compiler.h>
#include <linux/sched.h> /* current */
+#include <linux/dmi.h>
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/uaccess.h>
@@ -387,6 +388,33 @@ static int acpi_cpufreq_early_init_acpi(void)
return acpi_processor_preregister_performance(acpi_perf_data);
}
+/*
+ * Some BIOSes do SW_ANY coordination internally, either set it up in hw
+ * or do it in BIOS firmware and won't inform about it to OS. If not
+ * detected, this has a side effect of making CPU run at a different speed
+ * than OS intended it to run at. Detect it and handle it cleanly.
+ */
+static int bios_with_sw_any_bug;
+
+static int __init sw_any_bug_found(struct dmi_system_id *d)
+{
+ bios_with_sw_any_bug = 1;
+ return 0;
+}
+
+static struct dmi_system_id __initdata sw_any_bug_dmi_table[] = {
+ {
+ .callback = sw_any_bug_found,
+ .ident = "Supermicro Server X6DLP",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
+ DMI_MATCH(DMI_BIOS_VERSION, "080010"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"),
+ },
+ },
+ { }
+};
+
static int
acpi_cpufreq_cpu_init (
struct cpufreq_policy *policy)
@@ -422,8 +450,17 @@ acpi_cpufreq_cpu_init (
* coordination is required.
*/
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
- policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
+ policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
policy->cpus = perf->shared_cpu_map;
+ }
+
+#ifdef CONFIG_SMP
+ dmi_check_system(sw_any_bug_dmi_table);
+ if (bios_with_sw_any_bug && cpus_weight(policy->cpus) == 1) {
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+ policy->cpus = cpu_core_map[cpu];
+ }
+#endif
if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index 4f2c3aeef72..f5cc9f5c9ba 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -27,6 +27,7 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
+#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/string.h>
@@ -52,18 +53,26 @@
#define CPU_NEHEMIAH 5
static int cpu_model;
-static unsigned int numscales=16, numvscales;
+static unsigned int numscales=16;
static unsigned int fsb;
-static int minvid, maxvid;
+
+static struct mV_pos *vrm_mV_table;
+static unsigned char *mV_vrm_table;
+struct f_msr {
+ unsigned char vrm;
+};
+static struct f_msr f_msr_table[32];
+
+static unsigned int highest_speed, lowest_speed; /* kHz */
static unsigned int minmult, maxmult;
static int can_scale_voltage;
-static int vrmrev;
static struct acpi_processor *pr = NULL;
static struct acpi_processor_cx *cx = NULL;
+static int port22_en;
/* Module parameters */
-static int dont_scale_voltage;
-
+static int scale_voltage;
+static int ignore_latency;
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
@@ -71,7 +80,6 @@ static int dont_scale_voltage;
/* Clock ratios multiplied by 10 */
static int clock_ratio[32];
static int eblcr_table[32];
-static int voltage_table[32];
static unsigned int highest_speed, lowest_speed; /* kHz */
static int longhaul_version;
static struct cpufreq_frequency_table *longhaul_table;
@@ -124,10 +132,9 @@ static int longhaul_get_cpu_mult(void)
/* For processor with BCR2 MSR */
-static void do_longhaul1(int cx_address, unsigned int clock_ratio_index)
+static void do_longhaul1(unsigned int clock_ratio_index)
{
union msr_bcr2 bcr2;
- u32 t;
rdmsrl(MSR_VIA_BCR2, bcr2.val);
/* Enable software clock multiplier */
@@ -136,13 +143,11 @@ static void do_longhaul1(int cx_address, unsigned int clock_ratio_index)
/* Sync to timer tick */
safe_halt();
- ACPI_FLUSH_CPU_CACHE();
/* Change frequency on next halt or sleep */
wrmsrl(MSR_VIA_BCR2, bcr2.val);
- /* Invoke C3 */
- inb(cx_address);
- /* Dummy op - must do something useless after P_LVL3 read */
- t = inl(acpi_fadt.xpm_tmr_blk.address);
+ /* Invoke transition */
+ ACPI_FLUSH_CPU_CACHE();
+ halt();
/* Disable software clock multiplier */
local_irq_disable();
@@ -164,11 +169,16 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index)
longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
longhaul.bits.EnableSoftBusRatio = 1;
+ if (can_scale_voltage) {
+ longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm;
+ longhaul.bits.EnableSoftVID = 1;
+ }
+
/* Sync to timer tick */
safe_halt();
- ACPI_FLUSH_CPU_CACHE();
/* Change frequency on next halt or sleep */
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+ ACPI_FLUSH_CPU_CACHE();
/* Invoke C3 */
inb(cx_address);
/* Dummy op - must do something useless after P_LVL3 read */
@@ -227,10 +237,13 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
outb(0xFF,0xA1); /* Overkill */
outb(0xFE,0x21); /* TMR0 only */
- /* Disable bus master arbitration */
- if (pr->flags.bm_check) {
+ if (pr->flags.bm_control) {
+ /* Disable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
ACPI_MTX_DO_NOT_LOCK);
+ } else if (port22_en) {
+ /* Disable AGP and PCI arbiters */
+ outb(3, 0x22);
}
switch (longhaul_version) {
@@ -244,7 +257,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
*/
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
- do_longhaul1(cx->address, clock_ratio_index);
+ do_longhaul1(clock_ratio_index);
break;
/*
@@ -259,14 +272,20 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
* to work in practice.
*/
case TYPE_POWERSAVER:
+ /* Don't allow wakeup */
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0,
+ ACPI_MTX_DO_NOT_LOCK);
do_powersaver(cx->address, clock_ratio_index);
break;
}
- /* Enable bus master arbitration */
- if (pr->flags.bm_check) {
+ if (pr->flags.bm_control) {
+ /* Enable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0,
ACPI_MTX_DO_NOT_LOCK);
+ } else if (port22_en) {
+ /* Enable arbiters */
+ outb(0, 0x22);
}
outb(pic2_mask,0xA1); /* restore mask */
@@ -446,53 +465,57 @@ static int __init longhaul_get_ranges(void)
static void __init longhaul_setup_voltagescaling(void)
{
union msr_longhaul longhaul;
+ struct mV_pos minvid, maxvid;
+ unsigned int j, speed, pos, kHz_step, numvscales;
- rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
-
- if (!(longhaul.bits.RevisionID & 1))
+ rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+ if (!(longhaul.bits.RevisionID & 1)) {
+ printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
return;
+ }
+
+ if (!longhaul.bits.VRMRev) {
+ printk (KERN_INFO PFX "VRM 8.5\n");
+ vrm_mV_table = &vrm85_mV[0];
+ mV_vrm_table = &mV_vrm85[0];
+ } else {
+ printk (KERN_INFO PFX "Mobile VRM\n");
+ vrm_mV_table = &mobilevrm_mV[0];
+ mV_vrm_table = &mV_mobilevrm[0];
+ }
- minvid = longhaul.bits.MinimumVID;
- maxvid = longhaul.bits.MaximumVID;
- vrmrev = longhaul.bits.VRMRev;
+ minvid = vrm_mV_table[longhaul.bits.MinimumVID];
+ maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
+ numvscales = maxvid.pos - minvid.pos + 1;
+ kHz_step = (highest_speed - lowest_speed) / numvscales;
- if (minvid == 0 || maxvid == 0) {
+ if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
"Voltage scaling disabled.\n",
- minvid/1000, minvid%1000, maxvid/1000, maxvid%1000);
+ minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000);
return;
}
- if (minvid == maxvid) {
+ if (minvid.mV == maxvid.mV) {
printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are "
"both %d.%03d. Voltage scaling disabled\n",
- maxvid/1000, maxvid%1000);
+ maxvid.mV/1000, maxvid.mV%1000);
return;
}
- if (vrmrev==0) {
- dprintk ("VRM 8.5\n");
- memcpy (voltage_table, vrm85scales, sizeof(voltage_table));
- numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25;
- } else {
- dprintk ("Mobile VRM\n");
- memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table));
- numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5;
+ printk(KERN_INFO PFX "Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n",
+ maxvid.mV/1000, maxvid.mV%1000,
+ minvid.mV/1000, minvid.mV%1000,
+ numvscales);
+
+ j = 0;
+ while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
+ speed = longhaul_table[j].frequency;
+ pos = (speed - lowest_speed) / kHz_step + minvid.pos;
+ f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos];
+ j++;
}
- /* Current voltage isn't readable at first, so we need to
- set it to a known value. The spec says to use maxvid */
- longhaul.bits.RevisionKey = longhaul.bits.RevisionID; /* FIXME: This is bad. */
- longhaul.bits.EnableSoftVID = 1;
- longhaul.bits.SoftVID = maxvid;
- wrmsrl (MSR_VIA_LONGHAUL, longhaul.val);
-
- minvid = voltage_table[minvid];
- maxvid = voltage_table[maxvid];
-
- dprintk ("Min VID=%d.%03d Max VID=%d.%03d, %d possible voltage scales\n",
- maxvid/1000, maxvid%1000, minvid/1000, minvid%1000, numvscales);
-
can_scale_voltage = 1;
}
@@ -540,21 +563,33 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
return 1;
}
+/* VIA don't support PM2 reg, but have something similar */
+static int enable_arbiter_disable(void)
+{
+ struct pci_dev *dev;
+ u8 pci_cmd;
+
+ /* Find PLE133 host bridge */
+ dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL);
+ if (dev != NULL) {
+ /* Enable access to port 0x22 */
+ pci_read_config_byte(dev, 0x78, &pci_cmd);
+ if ( !(pci_cmd & 1<<7) ) {
+ pci_cmd |= 1<<7;
+ pci_write_config_byte(dev, 0x78, pci_cmd);
+ }
+ return 1;
+ }
+ return 0;
+}
+
static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = cpu_data;
char *cpuname=NULL;
int ret;
- /* Check ACPI support for C3 state */
- acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
- &longhaul_walk_callback, NULL, (void *)&pr);
- if (pr == NULL) goto err_acpi;
-
- cx = &pr->power.states[ACPI_STATE_C3];
- if (cx->address == 0 || cx->latency > 1000) goto err_acpi;
-
- /* Now check what we have on this motherboard */
+ /* Check what we have on this motherboard */
switch (c->x86_model) {
case 6:
cpu_model = CPU_SAMUEL;
@@ -636,12 +671,36 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
break;
};
+ /* Find ACPI data for processor */
+ acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
+ &longhaul_walk_callback, NULL, (void *)&pr);
+ if (pr == NULL)
+ goto err_acpi;
+
+ if (longhaul_version == TYPE_POWERSAVER) {
+ /* Check ACPI support for C3 state */
+ cx = &pr->power.states[ACPI_STATE_C3];
+ if (cx->address == 0 ||
+ (cx->latency > 1000 && ignore_latency == 0) )
+ goto err_acpi;
+
+ } else {
+ /* Check ACPI support for bus master arbiter disable */
+ if (!pr->flags.bm_control) {
+ if (!enable_arbiter_disable()) {
+ printk(KERN_ERR PFX "No ACPI support. No VT8601 host bridge. Aborting.\n");
+ return -ENODEV;
+ } else
+ port22_en = 1;
+ }
+ }
+
ret = longhaul_get_ranges();
if (ret != 0)
return ret;
if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) &&
- (dont_scale_voltage==0))
+ (scale_voltage != 0))
longhaul_setup_voltagescaling();
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
@@ -729,8 +788,10 @@ static void __exit longhaul_exit(void)
kfree(longhaul_table);
}
-module_param (dont_scale_voltage, int, 0644);
-MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor");
+module_param (scale_voltage, int, 0644);
+MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
+module_param(ignore_latency, int, 0644);
+MODULE_PARM_DESC(ignore_latency, "Skip ACPI C3 latency test");
MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
@@ -738,4 +799,3 @@ MODULE_LICENSE ("GPL");
late_initcall(longhaul_init);
module_exit(longhaul_exit);
-
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h
index d3a95d77ee8..bc4682aad69 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.h
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h
@@ -450,17 +450,45 @@ static int __initdata nehemiah_c_eblcr[32] = {
* Voltage scales. Div/Mod by 1000 to get actual voltage.
* Which scale to use depends on the VRM type in use.
*/
-static int __initdata vrm85scales[32] = {
- 1250, 1200, 1150, 1100, 1050, 1800, 1750, 1700,
- 1650, 1600, 1550, 1500, 1450, 1400, 1350, 1300,
- 1275, 1225, 1175, 1125, 1075, 1825, 1775, 1725,
- 1675, 1625, 1575, 1525, 1475, 1425, 1375, 1325,
+
+struct mV_pos {
+ unsigned short mV;
+ unsigned short pos;
+};
+
+static struct mV_pos __initdata vrm85_mV[32] = {
+ {1250, 8}, {1200, 6}, {1150, 4}, {1100, 2},
+ {1050, 0}, {1800, 30}, {1750, 28}, {1700, 26},
+ {1650, 24}, {1600, 22}, {1550, 20}, {1500, 18},
+ {1450, 16}, {1400, 14}, {1350, 12}, {1300, 10},
+ {1275, 9}, {1225, 7}, {1175, 5}, {1125, 3},
+ {1075, 1}, {1825, 31}, {1775, 29}, {1725, 27},
+ {1675, 25}, {1625, 23}, {1575, 21}, {1525, 19},
+ {1475, 17}, {1425, 15}, {1375, 13}, {1325, 11}
+};
+
+static unsigned char __initdata mV_vrm85[32] = {
+ 0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11,
+ 0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d,
+ 0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19,
+ 0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15
+};
+
+static struct mV_pos __initdata mobilevrm_mV[32] = {
+ {1750, 31}, {1700, 30}, {1650, 29}, {1600, 28},
+ {1550, 27}, {1500, 26}, {1450, 25}, {1400, 24},
+ {1350, 23}, {1300, 22}, {1250, 21}, {1200, 20},
+ {1150, 19}, {1100, 18}, {1050, 17}, {1000, 16},
+ {975, 15}, {950, 14}, {925, 13}, {900, 12},
+ {875, 11}, {850, 10}, {825, 9}, {800, 8},
+ {775, 7}, {750, 6}, {725, 5}, {700, 4},
+ {675, 3}, {650, 2}, {625, 1}, {600, 0}
};
-static int __initdata mobilevrmscales[32] = {
- 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
- 1600, 1550, 1500, 1450, 1500, 1350, 1300, -1,
- 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
- 1075, 1050, 1025, 1000, 975, 950, 925, -1,
+static unsigned char __initdata mV_mobilevrm[32] = {
+ 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18,
+ 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10,
+ 0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08,
+ 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00
};
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index b77f1358bd7..7a9325349e9 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -23,6 +23,7 @@
#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
#include <linux/acpi.h>
+#include <linux/dmi.h>
#include <acpi/processor.h>
#endif
@@ -377,6 +378,35 @@ static int centrino_cpu_early_init_acpi(void)
return 0;
}
+
+/*
+ * Some BIOSes do SW_ANY coordination internally, either set it up in hw
+ * or do it in BIOS firmware and won't inform about it to OS. If not
+ * detected, this has a side effect of making CPU run at a different speed
+ * than OS intended it to run at. Detect it and handle it cleanly.
+ */
+static int bios_with_sw_any_bug;
+static int __init sw_any_bug_found(struct dmi_system_id *d)
+{
+ bios_with_sw_any_bug = 1;
+ return 0;
+}
+
+
+static struct dmi_system_id sw_any_bug_dmi_table[] = {
+ {
+ .callback = sw_any_bug_found,
+ .ident = "Supermicro Server X6DLP",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
+ DMI_MATCH(DMI_BIOS_VERSION, "080010"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"),
+ },
+ },
+ { }
+};
+
+
/*
* centrino_cpu_init_acpi - register with ACPI P-States library
*
@@ -398,14 +428,24 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
dprintk(PFX "obtaining ACPI data failed\n");
return -EIO;
}
+
policy->shared_type = p->shared_type;
/*
* Will let policy->cpus know about dependency only when software
* coordination is required.
*/
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
- policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
+ policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
policy->cpus = p->shared_cpu_map;
+ }
+
+#ifdef CONFIG_SMP
+ dmi_check_system(sw_any_bug_dmi_table);
+ if (bios_with_sw_any_bug && cpus_weight(policy->cpus) == 1) {
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+ policy->cpus = cpu_core_map[cpu];
+ }
+#endif
/* verify the acpi_data */
if (p->state_count <= 1) {
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-27 23:07:17 +0000