4 files changed, 8 insertions, 30 deletions
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index d6235583e97..194b8428bba 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -19,6 +19,8 @@ config MACH_MX31ADS
 config MACH_MX31ADS_WM1133_EV1
 	bool "Support Wolfson Microelectronics 1133-EV1 module"
 	depends on MACH_MX31ADS
+	depends on MFD_WM8350_I2C
+	depends on REGULATOR_WM8350
 	select MFD_WM8350_CONFIG_MODE_0
 	select MFD_WM8352_CONFIG_MODE_0
 	help
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 83e5e8e1276..a6d6efefa6a 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -102,7 +102,7 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int uart_pins[] = {
+static unsigned int uart_pins[] = {
 	MX31_PIN_CTS1__CTS1,
 	MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1,
@@ -452,6 +452,8 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
 
 	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
 
+	regulator_has_full_constraints();
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c3648eff513..b5227d837b2 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -226,10 +226,10 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
-	/* SMSC9215 IRQ pin */
+	/* LAN9217 IRQ pin */
 	if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
 				"pcm037-eth"))
-		gpio_direction_input(MX31_PIN_GPIO3_1);
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
 
 #ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(1, pcm037_i2c_devices,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 6c4283cec6f..5a01e48fd8f 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -251,32 +251,6 @@ static void __init qong_init_fpga(void)
 }
 
 /*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc qong_io_desc[] __initdata = {
-	{
-		.virtual = AIPS1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length = AIPS1_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
-		.virtual = AIPS2_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length = AIPS2_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init qong_map_io(void)
-{
-	mxc_map_io();
-	iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc));
-}
-
-/*
  * Board specific initialization.
  */
 static void __init mxc_board_init(void)
@@ -305,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = qong_map_io,
+	.map_io         = mxc_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,