summaryrefslogtreecommitdiff
path: root/arch/alpha/kernel/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/alpha/kernel/pci.c')
-rw-r--r--arch/alpha/kernel/pci.c51
1 files changed, 9 insertions, 42 deletions
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 9dc1cee4326..36ab22a7ea1 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -71,25 +71,13 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i
static void __init
quirk_cypress(struct pci_dev *dev)
{
- /* The Notorious Cy82C693 chip. */
-
- /* The Cypress IDE controller doesn't support native mode, but it
- has programmable addresses of IDE command/control registers.
- This violates PCI specifications, confuses the IDE subsystem and
- causes resource conflicts between the primary HD_CMD register and
- the floppy controller. Ugh. Fix that. */
- if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
- dev->resource[0].flags = 0;
- dev->resource[1].flags = 0;
- }
-
/* The Cypress bridge responds on the PCI bus in the address range
0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no
way to turn this off. The bridge also supports several extended
BIOS ranges (disabled after power-up), and some consoles do turn
them on. So if we use a large direct-map window, or a large SG
window, we must avoid the entire 0xfff00000-0xffffffff region. */
- else if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA) {
+ if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA) {
if (__direct_map_base + __direct_map_size >= 0xfff00000UL)
__direct_map_size = 0xfff00000UL - __direct_map_base;
else {
@@ -220,7 +208,7 @@ pdev_save_srm_config(struct pci_dev *dev)
tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp) {
- printk(KERN_ERR "%s: kmalloc() failed!\n", __FUNCTION__);
+ printk(KERN_ERR "%s: kmalloc() failed!\n", __func__);
return;
}
tmp->next = srm_saved_configs;
@@ -372,28 +360,7 @@ EXPORT_SYMBOL(pcibios_bus_to_resource);
int
pcibios_enable_device(struct pci_dev *dev, int mask)
{
- u16 cmd, oldcmd;
- int i;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- oldcmd = cmd;
-
- for (i = 0; i < PCI_NUM_RESOURCES; i++) {
- struct resource *res = &dev->resource[i];
-
- if (res->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- else if (res->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
-
- if (cmd != oldcmd) {
- printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
- pci_name(dev), cmd);
- /* Enable the appropriate bits in the PCI command register. */
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
+ return pci_enable_resources(dev, mask);
}
/*
@@ -412,7 +379,7 @@ pcibios_set_master(struct pci_dev *dev)
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
}
-static void __init
+void __init
pcibios_claim_one_bus(struct pci_bus *b)
{
struct pci_dev *dev;
@@ -426,7 +393,8 @@ pcibios_claim_one_bus(struct pci_bus *b)
if (r->parent || !r->start || !r->flags)
continue;
- pci_claim_resource(dev, i);
+ if (pci_probe_only || (r->flags & IORESOURCE_PCI_FIXED))
+ pci_claim_resource(dev, i);
}
}
@@ -465,8 +433,7 @@ common_init_pci(void)
}
}
- if (pci_probe_only)
- pcibios_claim_console_setup();
+ pcibios_claim_console_setup();
pci_assign_unassigned_resources();
pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
@@ -547,8 +514,8 @@ sys_pciconfig_iobase(long which, unsigned long bus, unsigned long dfn)
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
{
- unsigned long start = pci_resource_start(dev, bar);
- unsigned long len = pci_resource_len(dev, bar);
+ resource_size_t start = pci_resource_start(dev, bar);
+ resource_size_t len = pci_resource_len(dev, bar);
unsigned long flags = pci_resource_flags(dev, bar);
if (!len || !start)