diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/mc13xxx.txt | 78 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/twl-familly.txt | 47 | ||||
| -rw-r--r-- | Documentation/filesystems/ceph.txt | 18 | ||||
| -rw-r--r-- | Documentation/filesystems/squashfs.txt | 6 | ||||
| -rw-r--r-- | Documentation/mmc/mmc-dev-attrs.txt | 10 | ||||
| -rw-r--r-- | Documentation/mmc/mmc-dev-parts.txt | 13 |
6 files changed, 164 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt new file mode 100644 index 00000000000..19f6af47a79 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -0,0 +1,78 @@ +* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC) + +Required properties: +- compatible : Should be "fsl,mc13783" or "fsl,mc13892" + +Optional properties: +- fsl,mc13xxx-uses-adc : Indicate the ADC is being used +- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used +- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used +- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used + +Sub-nodes: +- regulators : Contain the regulator nodes. The MC13892 regulators are + bound using their names as listed below with their registers and bits + for enabling. + + vcoincell : regulator VCOINCELL (register 13, bit 23) + sw1 : regulator SW1 (register 24, bit 0) + sw2 : regulator SW2 (register 25, bit 0) + sw3 : regulator SW3 (register 26, bit 0) + sw4 : regulator SW4 (register 27, bit 0) + swbst : regulator SWBST (register 29, bit 20) + vgen1 : regulator VGEN1 (register 32, bit 0) + viohi : regulator VIOHI (register 32, bit 3) + vdig : regulator VDIG (register 32, bit 9) + vgen2 : regulator VGEN2 (register 32, bit 12) + vpll : regulator VPLL (register 32, bit 15) + vusb2 : regulator VUSB2 (register 32, bit 18) + vgen3 : regulator VGEN3 (register 33, bit 0) + vcam : regulator VCAM (register 33, bit 6) + vvideo : regulator VVIDEO (register 33, bit 12) + vaudio : regulator VAUDIO (register 33, bit 15) + vsd : regulator VSD (register 33, bit 18) + gpo1 : regulator GPO1 (register 34, bit 6) + gpo2 : regulator GPO2 (register 34, bit 8) + gpo3 : regulator GPO3 (register 34, bit 10) + gpo4 : regulator GPO4 (register 34, bit 12) + pwgt1spi : regulator PWGT1SPI (register 34, bit 15) + pwgt2spi : regulator PWGT2SPI (register 34, bit 16) + vusb : regulator VUSB (register 50, bit 3) + + The bindings details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + +Examples: + +ecspi@70010000 { /* ECSPI1 */ + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */ + <&gpio3 25 0>; /* GPIO4_25 */ + status = "okay"; + + pmic: mc13892@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mc13892"; + spi-max-frequency = <6000000>; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <8>; + + regulators { + sw1_reg: mc13892__sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: mc13892__sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt new file mode 100644 index 00000000000..a66fcf94675 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt @@ -0,0 +1,47 @@ +Texas Instruments TWL family + +The TWLs are Integrated Power Management Chips. +Some version might contain much more analog function like +USB transceiver or Audio amplifier. +These chips are connected to an i2c bus. + + +Required properties: +- compatible : Must be "ti,twl4030"; + For Integrated power-management/audio CODEC device used in OMAP3 + based boards +- compatible : Must be "ti,twl6030"; + For Integrated power-management used in OMAP4 based boards +- interrupts : This i2c device has an IRQ line connected to the main SoC +- interrupt-controller : Since the twl support several interrupts internally, + it is considered as an interrupt controller cascaded to the SoC one. +- #interrupt-cells = <1>; +- interrupt-parent : The parent interrupt controller. + +Optional node: +- Child nodes contain in the twl. The twl family is made of several variants + that support a different number of features. + The children nodes will thus depend of the capability of the variant. + + +Example: +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/twl6030.pdf + */ +twl@48 { + compatible = "ti,twl6030"; + reg = <0x48>; + interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <0>; + + twl_rtc { + compatible = "ti,twl_rtc"; + interrupts = <11>; + reg = <0>; + }; +}; diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt index 763d8ebbbeb..d6030aa3337 100644 --- a/Documentation/filesystems/ceph.txt +++ b/Documentation/filesystems/ceph.txt @@ -119,12 +119,20 @@ Mount Options must rely on TCP's error correction to detect data corruption in the data payload. - noasyncreaddir - Disable client's use its local cache to satisfy readdir - requests. (This does not change correctness; the client uses - cached metadata only when a lease or capability ensures it is - valid.) + dcache + Use the dcache contents to perform negative lookups and + readdir when the client has the entire directory contents in + its cache. (This does not change correctness; the client uses + cached metadata only when a lease or capability ensures it is + valid.) + + nodcache + Do not use the dcache as above. This avoids a significant amount of + complex code, sacrificing performance without affecting correctness, + and is useful for tracking down bugs. + noasyncreaddir + Do not use the dcache as above for readdir. More Information ================ diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt index 7db3ebda5a4..403c090aca3 100644 --- a/Documentation/filesystems/squashfs.txt +++ b/Documentation/filesystems/squashfs.txt @@ -93,8 +93,8 @@ byte alignment: Compressed data blocks are written to the filesystem as files are read from the source directory, and checked for duplicates. Once all file data has been -written the completed inode, directory, fragment, export and uid/gid lookup -tables are written. +written the completed inode, directory, fragment, export, uid/gid lookup and +xattr tables are written. 3.1 Compression options ----------------------- @@ -151,7 +151,7 @@ in each metadata block. Directories are sorted in alphabetical order, and at lookup the index is scanned linearly looking for the first filename alphabetically larger than the filename being looked up. At this point the location of the metadata block the filename is in has been found. -The general idea of the index is ensure only one metadata block needs to be +The general idea of the index is to ensure only one metadata block needs to be decompressed to do a lookup irrespective of the length of the directory. This scheme has the advantage that it doesn't require extra memory overhead and doesn't require much extra storage on disk. diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt index 8898a95b41e..22ae8441489 100644 --- a/Documentation/mmc/mmc-dev-attrs.txt +++ b/Documentation/mmc/mmc-dev-attrs.txt @@ -64,3 +64,13 @@ Note on Erase Size and Preferred Erase Size: size specified by the card. "preferred_erase_size" is in bytes. + +SD/MMC/SDIO Clock Gating Attribute +================================== + +Read and write access is provided to following attribute. +This attribute appears only if CONFIG_MMC_CLKGATE is enabled. + + clkgate_delay Tune the clock gating delay with desired value in milliseconds. + +echo <desired delay> > /sys/class/mmc_host/mmcX/clkgate_delay diff --git a/Documentation/mmc/mmc-dev-parts.txt b/Documentation/mmc/mmc-dev-parts.txt index 2db28b8e662..f08d078d43c 100644 --- a/Documentation/mmc/mmc-dev-parts.txt +++ b/Documentation/mmc/mmc-dev-parts.txt @@ -25,3 +25,16 @@ echo 0 > /sys/block/mmcblkXbootY/force_ro To re-enable read-only access: echo 1 > /sys/block/mmcblkXbootY/force_ro + +The boot partitions can also be locked read only until the next power on, +with: + +echo 1 > /sys/block/mmcblkXbootY/ro_lock_until_next_power_on + +This is a feature of the card and not of the kernel. If the card does +not support boot partition locking, the file will not exist. If the +feature has been disabled on the card, the file will be read-only. + +The boot partitions can also be locked permanently, but this feature is +not accessible through sysfs in order to avoid accidental or malicious +bricking. |