summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2006-04-02 12:48:36 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2006-04-02 12:48:36 -0700
commitf900e5824a44ab65437b4f7e7c610b72f94820c5 (patch)
tree770015a763e4c87e807e00a467a4ca602f242363 /include
parent23344cb341902f4e3431d8137dca93d6e186d054 (diff)
parent856d08ec46c5ecf3df13827c492fb6998fdc8322 (diff)
Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: [PATCH] powerpc: iSeries needs slb_initialize to be called powerpc: hook up the splice syscall [PATCH] powerpc/cell: compile fixes [PATCH] powerpc: trivial spelling fixes in fault.c [PATCH] powerpc/pseries: EEH Cleanup [PATCH] powerpc/pseries: misc lparcfg fixes [PATCH] powerpc/pseries: fix device name printing, again. [PATCH] powerpc: Extends HCALL interface for InfiniBand usage [PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPS [PATCH] powerpc/pseries: print message if EEH recovery fails [PATCH] powerpc/pseries: mutex lock to serialize EEH event processing powerpc: converted embedded platforms to use new define_machine support powerpc: merge machine_check_exception between ppc32 & ppc64
Diffstat (limited to 'include')
-rw-r--r--include/asm-powerpc/eeh.h20
-rw-r--r--include/asm-powerpc/hvcall.h185
2 files changed, 146 insertions, 59 deletions
diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h
index 5207758a6dd..868c7139dbf 100644
--- a/include/asm-powerpc/eeh.h
+++ b/include/asm-powerpc/eeh.h
@@ -60,24 +60,10 @@ void __init pci_addr_cache_build(void);
* device (including config space i/o). Call eeh_add_device_late
* to finish the eeh setup for this device.
*/
-void eeh_add_device_early(struct device_node *);
-void eeh_add_device_late(struct pci_dev *dev);
void eeh_add_device_tree_early(struct device_node *);
void eeh_add_device_tree_late(struct pci_bus *);
/**
- * eeh_remove_device - undo EEH setup for the indicated pci device
- * @dev: pci device to be removed
- *
- * This routine should be called when a device is removed from
- * a running system (e.g. by hotplug or dlpar). It unregisters
- * the PCI device from the EEH subsystem. I/O errors affecting
- * this device will no longer be detected after this call; thus,
- * i/o errors affecting this slot may leave this device unusable.
- */
-void eeh_remove_device(struct pci_dev *);
-
-/**
* eeh_remove_device_recursive - undo EEH for device & children.
* @dev: pci device to be removed
*
@@ -116,12 +102,6 @@ static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *d
static inline void pci_addr_cache_build(void) { }
-static inline void eeh_add_device_early(struct device_node *dn) { }
-
-static inline void eeh_add_device_late(struct pci_dev *dev) { }
-
-static inline void eeh_remove_device(struct pci_dev *dev) { }
-
static inline void eeh_add_device_tree_early(struct device_node *dn) { }
static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
index b72c04f3f55..6cc7e1fb7bf 100644
--- a/include/asm-powerpc/hvcall.h
+++ b/include/asm-powerpc/hvcall.h
@@ -4,47 +4,88 @@
#define HVSC .long 0x44000022
-#define H_Success 0
-#define H_Busy 1 /* Hardware busy -- retry later */
-#define H_Closed 2 /* Resource closed */
-#define H_Constrained 4 /* Resource request constrained to max allowed */
-#define H_InProgress 14 /* Kind of like busy */
-#define H_Pending 17 /* returned from H_POLL_PENDING */
-#define H_Continue 18 /* Returned from H_Join on success */
-#define H_LongBusyStartRange 9900 /* Start of long busy range */
-#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */
-#define H_LongBusyOrder10msec 9901 /* Long busy, hint that 10msec is a good time to retry */
-#define H_LongBusyOrder100msec 9902 /* Long busy, hint that 100msec is a good time to retry */
-#define H_LongBusyOrder1sec 9903 /* Long busy, hint that 1sec is a good time to retry */
-#define H_LongBusyOrder10sec 9904 /* Long busy, hint that 10sec is a good time to retry */
-#define H_LongBusyOrder100sec 9905 /* Long busy, hint that 100sec is a good time to retry */
-#define H_LongBusyEndRange 9905 /* End of long busy range */
-#define H_Hardware -1 /* Hardware error */
-#define H_Function -2 /* Function not supported */
-#define H_Privilege -3 /* Caller not privileged */
-#define H_Parameter -4 /* Parameter invalid, out-of-range or conflicting */
-#define H_Bad_Mode -5 /* Illegal msr value */
-#define H_PTEG_Full -6 /* PTEG is full */
-#define H_Not_Found -7 /* PTE was not found" */
-#define H_Reserved_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
-#define H_NoMem -9
-#define H_Authority -10
-#define H_Permission -11
-#define H_Dropped -12
-#define H_SourceParm -13
-#define H_DestParm -14
-#define H_RemoteParm -15
-#define H_Resource -16
+#define H_SUCCESS 0
+#define H_BUSY 1 /* Hardware busy -- retry later */
+#define H_CLOSED 2 /* Resource closed */
+#define H_NOT_AVAILABLE 3
+#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
+#define H_PARTIAL 5
+#define H_IN_PROGRESS 14 /* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE 16
+#define H_PENDING 17 /* returned from H_POLL_PENDING */
+#define H_CONTINUE 18 /* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
+ is a good time to retry */
+#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
+#define H_HARDWARE -1 /* Hardware error */
+#define H_FUNCTION -2 /* Function not supported */
+#define H_PRIVILEGE -3 /* Caller not privileged */
+#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE -5 /* Illegal msr value */
+#define H_PTEG_FULL -6 /* PTEG is full */
+#define H_NOT_FOUND -7 /* PTE was not found" */
+#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM -9
+#define H_AUTHORITY -10
+#define H_PERMISSION -11
+#define H_DROPPED -12
+#define H_SOURCE_PARM -13
+#define H_DEST_PARM -14
+#define H_REMOTE_PARM -15
+#define H_RESOURCE -16
+#define H_ADAPTER_PARM -17
+#define H_RH_PARM -18
+#define H_RCQ_PARM -19
+#define H_SCQ_PARM -20
+#define H_EQ_PARM -21
+#define H_RT_PARM -22
+#define H_ST_PARM -23
+#define H_SIGT_PARM -24
+#define H_TOKEN_PARM -25
+#define H_MLENGTH_PARM -27
+#define H_MEM_PARM -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM -30
+#define H_PORT_PARM -31
+#define H_MCG_PARM -32
+#define H_VL_PARM -33
+#define H_TSIZE_PARM -34
+#define H_TRACE_PARM -35
+
+#define H_MASK_PARM -37
+#define H_MCG_FULL -38
+#define H_ALIAS_EXIST -39
+#define H_P_COUNTER -40
+#define H_TABLE_FULL -41
+#define H_ALT_TABLE -42
+#define H_MR_CONDITION -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE -45
+#define H_RESCINDEND -46
+
/* Long Busy is a condition that can be returned by the firmware
* when a call cannot be completed now, but the identical call
* should be retried later. This prevents calls blocking in the
- * firmware for long periods of time. Annoyingly the firmware can return
+ * firmware for long periods of time. Annoyingly the firmware can return
* a range of return codes, hinting at how long we should wait before
* retrying. If you don't care for the hint, the macro below is a good
* way to check for the long_busy return codes
*/
-#define H_isLongBusy(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange))
+#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
+ && (x <= H_LONG_BUSY_END_RANGE))
/* Flags */
#define H_LARGE_PAGE (1UL<<(63-16))
@@ -66,6 +107,9 @@
#define H_DABRX_KERNEL (1UL<<(63-62))
#define H_DABRX_USER (1UL<<(63-63))
+/* Each control block has to be on a 4K bondary */
+#define H_CB_ALIGNMENT 4096
+
/* pSeries hypervisor opcodes */
#define H_REMOVE 0x04
#define H_ENTER 0x08
@@ -99,25 +143,52 @@
#define H_PERFMON 0x7c
#define H_MIGRATE_DMA 0x78
#define H_REGISTER_VPA 0xDC
-#define H_CEDE 0xE0
+#define H_CEDE 0xE0
#define H_CONFER 0xE4
-#define H_PROD 0xE8
+#define H_PROD 0xE8
#define H_GET_PPP 0xEC
#define H_SET_PPP 0xF0
#define H_PURR 0xF4
-#define H_PIC 0xF8
+#define H_PIC 0xF8
#define H_REG_CRQ 0xFC
#define H_FREE_CRQ 0x100
#define H_VIO_SIGNAL 0x104
#define H_SEND_CRQ 0x108
-#define H_COPY_RDMA 0x110
+#define H_COPY_RDMA 0x110
#define H_SET_XDABR 0x134
#define H_STUFF_TCE 0x138
#define H_PUT_TCE_INDIRECT 0x13C
#define H_VTERM_PARTNER_INFO 0x150
#define H_REGISTER_VTERM 0x154
#define H_FREE_VTERM 0x158
-#define H_POLL_PENDING 0x1D8
+#define H_RESET_EVENTS 0x15C
+#define H_ALLOC_RESOURCE 0x160
+#define H_FREE_RESOURCE 0x164
+#define H_MODIFY_QP 0x168
+#define H_QUERY_QP 0x16C
+#define H_REREGISTER_PMR 0x170
+#define H_REGISTER_SMR 0x174
+#define H_QUERY_MR 0x178
+#define H_QUERY_MW 0x17C
+#define H_QUERY_HCA 0x180
+#define H_QUERY_PORT 0x184
+#define H_MODIFY_PORT 0x188
+#define H_DEFINE_AQP1 0x18C
+#define H_GET_TRACE_BUFFER 0x190
+#define H_DEFINE_AQP0 0x194
+#define H_RESIZE_MR 0x198
+#define H_ATTACH_MCQP 0x19C
+#define H_DETACH_MCQP 0x1A0
+#define H_CREATE_RPT 0x1A4
+#define H_REMOVE_RPT 0x1A8
+#define H_REGISTER_RPAGES 0x1AC
+#define H_DISABLE_AND_GETC 0x1B0
+#define H_ERROR_DATA 0x1B4
+#define H_GET_HCA_INFO 0x1B8
+#define H_GET_PERF_COUNT 0x1BC
+#define H_MANAGE_TRACE 0x1C0
+#define H_QUERY_INT_STATE 0x1E4
+#define H_POLL_PENDING 0x1D8
#define H_JOIN 0x298
#define H_ENABLE_CRQ 0x2B0
@@ -152,7 +223,7 @@ long plpar_hcall_norets(unsigned long opcode, ...);
*/
long plpar_hcall_8arg_2ret(unsigned long opcode,
unsigned long arg1,
- unsigned long arg2,
+ unsigned long arg2,
unsigned long arg3,
unsigned long arg4,
unsigned long arg5,
@@ -176,6 +247,42 @@ long plpar_hcall_4out(unsigned long opcode,
unsigned long *out3,
unsigned long *out4);
+long plpar_hcall_7arg_7ret(unsigned long opcode,
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3,
+ unsigned long arg4,
+ unsigned long arg5,
+ unsigned long arg6,
+ unsigned long arg7,
+ unsigned long *out1,
+ unsigned long *out2,
+ unsigned long *out3,
+ unsigned long *out4,
+ unsigned long *out5,
+ unsigned long *out6,
+ unsigned long *out7);
+
+long plpar_hcall_9arg_9ret(unsigned long opcode,
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3,
+ unsigned long arg4,
+ unsigned long arg5,
+ unsigned long arg6,
+ unsigned long arg7,
+ unsigned long arg8,
+ unsigned long arg9,
+ unsigned long *out1,
+ unsigned long *out2,
+ unsigned long *out3,
+ unsigned long *out4,
+ unsigned long *out5,
+ unsigned long *out6,
+ unsigned long *out7,
+ unsigned long *out8,
+ unsigned long *out9);
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HVCALL_H */