Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
	drivers/net/wireless/rtlwifi/rtl8192se/sw.c

4 files changed, 57 insertions, 0 deletions

diff --git a/include/linux/nfc.h b/include/linux/nfc.h
index 01d4e5d6032..b4999abcb2a 100644
--- a/include/linux/nfc.h
+++ b/include/linux/nfc.h
@@ -89,6 +89,8 @@ enum nfc_commands {
  * @NFC_ATTR_TARGET_SEL_RES: NFC-A targets extra information (useful if the
  *	target is not NFC-Forum compliant)
  * @NFC_ATTR_TARGET_NFCID1: NFC-A targets identifier, max 10 bytes
+ * @NFC_ATTR_TARGET_SENSB_RES: NFC-B targets extra information, max 12 bytes
+ * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes
  * @NFC_ATTR_COMM_MODE: Passive or active mode
  * @NFC_ATTR_RF_MODE: Initiator or target
  */
@@ -101,6 +103,8 @@ enum nfc_attrs {
 	NFC_ATTR_TARGET_SENS_RES,
 	NFC_ATTR_TARGET_SEL_RES,
 	NFC_ATTR_TARGET_NFCID1,
+	NFC_ATTR_TARGET_SENSB_RES,
+	NFC_ATTR_TARGET_SENSF_RES,
 	NFC_ATTR_COMM_MODE,
 	NFC_ATTR_RF_MODE,
 /* private: internal use only */
@@ -109,6 +113,9 @@ enum nfc_attrs {
 #define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1)
 
 #define NFC_DEVICE_NAME_MAXSIZE 8
+#define NFC_NFCID1_MAXSIZE 10
+#define NFC_SENSB_RES_MAXSIZE 12
+#define NFC_SENSF_RES_MAXSIZE 18
 
 /* NFC protocols */
 #define NFC_PROTO_JEWEL		1
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 0f5ff373982..ad56e21a9f1 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1475,6 +1475,7 @@ enum nl80211_attrs {
 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
 
 #define NL80211_MAX_SUPP_RATES			32
+#define NL80211_MAX_SUPP_HT_RATES		77
 #define NL80211_MAX_SUPP_REG_RULES		32
 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
@@ -2104,6 +2105,9 @@ enum nl80211_mntr_flags {
  * TUs) during which a mesh STA can send only one Action frame containing a
  * PERR element.
  *
+ * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
+ * or forwarding entity (default is TRUE - forwarding entity)
+ *
  * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
  *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
@@ -2128,6 +2132,7 @@ enum nl80211_meshconf_params {
 	NL80211_MESHCONF_HWMP_RANN_INTERVAL,
 	NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
 	NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
+	NL80211_MESHCONF_FORWARDING,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -2401,12 +2406,15 @@ enum nl80211_key_attributes {
  *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
  *	1 = 500 kbps) but without the IE length restriction (at most
  *	%NL80211_MAX_SUPP_RATES in a single array).
+ * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection
+ *	in an array of MCS numbers.
  * @__NL80211_TXRATE_AFTER_LAST: internal
  * @NL80211_TXRATE_MAX: highest TX rate attribute
  */
 enum nl80211_tx_rate_attributes {
 	__NL80211_TXRATE_INVALID,
 	NL80211_TXRATE_LEGACY,
+	NL80211_TXRATE_MCS,
 
 	/* keep last */
 	__NL80211_TXRATE_AFTER_LAST,
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index dcf35b0f303..bbc2612cb64 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -16,6 +16,12 @@ struct pcmcia_device;
 struct ssb_bus;
 struct ssb_driver;
 
+struct ssb_sprom_core_pwr_info {
+	u8 itssi_2g, itssi_5g;
+	u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
+	u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
+};
+
 struct ssb_sprom {
 	u8 revision;
 	u8 il0mac[6];		/* MAC address for 802.11b/g */
@@ -82,6 +88,8 @@ struct ssb_sprom {
 	u16 boardflags2_hi;	/* Board flags (bits 48-63) */
 	/* TODO store board flags in a single u64 */
 
+	struct ssb_sprom_core_pwr_info core_pwr_info[4];
+
 	/* Antenna gain values for up to 4 antennas
 	 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
 	 * loss in the connectors is bigger than the gain. */
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index c814ae6eeb2..40b1ef8595e 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -449,6 +449,39 @@
 #define SSB_SPROM8_TS_SLP_OPT_CORRX	0x00B6
 #define SSB_SPROM8_FOC_HWIQ_IQSWP	0x00B8
 #define SSB_SPROM8_PHYCAL_TEMPDELTA	0x00BA
+
+/* There are 4 blocks with power info sharing the same layout */
+#define SSB_SROM8_PWR_INFO_CORE0	0x00C0
+#define SSB_SROM8_PWR_INFO_CORE1	0x00E0
+#define SSB_SROM8_PWR_INFO_CORE2	0x0100
+#define SSB_SROM8_PWR_INFO_CORE3	0x0120
+
+#define SSB_SROM8_2G_MAXP_ITSSI		0x00
+#define  SSB_SPROM8_2G_MAXP		0x00FF
+#define  SSB_SPROM8_2G_ITSSI		0xFF00
+#define  SSB_SPROM8_2G_ITSSI_SHIFT	8
+#define SSB_SROM8_2G_PA_0		0x02	/* 2GHz power amp settings */
+#define SSB_SROM8_2G_PA_1		0x04
+#define SSB_SROM8_2G_PA_2		0x06
+#define SSB_SROM8_5G_MAXP_ITSSI		0x08	/* 5GHz ITSSI and 5.3GHz Max Power */
+#define  SSB_SPROM8_5G_MAXP		0x00FF
+#define  SSB_SPROM8_5G_ITSSI		0xFF00
+#define  SSB_SPROM8_5G_ITSSI_SHIFT	8
+#define SSB_SPROM8_5GHL_MAXP		0x0A	/* 5.2GHz and 5.8GHz Max Power */
+#define  SSB_SPROM8_5GH_MAXP		0x00FF
+#define  SSB_SPROM8_5GL_MAXP		0xFF00
+#define  SSB_SPROM8_5GL_MAXP_SHIFT	8
+#define SSB_SROM8_5G_PA_0		0x0C	/* 5.3GHz power amp settings */
+#define SSB_SROM8_5G_PA_1		0x0E
+#define SSB_SROM8_5G_PA_2		0x10
+#define SSB_SROM8_5GL_PA_0		0x12	/* 5.2GHz power amp settings */
+#define SSB_SROM8_5GL_PA_1		0x14
+#define SSB_SROM8_5GL_PA_2		0x16
+#define SSB_SROM8_5GH_PA_0		0x18	/* 5.8GHz power amp settings */
+#define SSB_SROM8_5GH_PA_1		0x1A
+#define SSB_SROM8_5GH_PA_2		0x1C
+
+/* TODO: Make it deprecated */
 #define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
 #define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
 #define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
@@ -473,6 +506,7 @@
 #define SSB_SPROM8_PA1HIB0		0x00D8	/* 5.8GHz power amp settings */
 #define SSB_SPROM8_PA1HIB1		0x00DA
 #define SSB_SPROM8_PA1HIB2		0x00DC
+
 #define SSB_SPROM8_CCK2GPO		0x0140	/* CCK power offset */
 #define SSB_SPROM8_OFDM2GPO		0x0142	/* 2.4GHz OFDM power offset */
 #define SSB_SPROM8_OFDM5GPO		0x0146	/* 5.3GHz OFDM power offset */