Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 295 insertions, 0 deletions

diff --git a/include/asm-ia64/system.h b/include/asm-ia64/system.h
new file mode 100644
index 00000000000..6f516e76d1f
--- /dev/null
+++ b/include/asm-ia64/system.h
@@ -0,0 +1,295 @@
+#ifndef _ASM_IA64_SYSTEM_H
+#define _ASM_IA64_SYSTEM_H
+
+/*
+ * System defines. Note that this is included both from .c and .S
+ * files, so it does only defines, not any C code.  This is based
+ * on information published in the Processor Abstraction Layer
+ * and the System Abstraction Layer manual.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+#include <linux/config.h>
+
+#include <asm/kregs.h>
+#include <asm/page.h>
+#include <asm/pal.h>
+#include <asm/percpu.h>
+
+#define GATE_ADDR		__IA64_UL_CONST(0xa000000000000000)
+/*
+ * 0xa000000000000000+2*PERCPU_PAGE_SIZE
+ * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
+ */
+#define KERNEL_START		 __IA64_UL_CONST(0xa000000100000000)
+#define PERCPU_ADDR		(-PERCPU_PAGE_SIZE)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct pci_vector_struct {
+	__u16 segment;	/* PCI Segment number */
+	__u16 bus;	/* PCI Bus number */
+	__u32 pci_id;	/* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
+	__u8 pin;	/* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
+	__u32 irq;	/* IRQ assigned */
+};
+
+extern struct ia64_boot_param {
+	__u64 command_line;		/* physical address of command line arguments */
+	__u64 efi_systab;		/* physical address of EFI system table */
+	__u64 efi_memmap;		/* physical address of EFI memory map */
+	__u64 efi_memmap_size;		/* size of EFI memory map */
+	__u64 efi_memdesc_size;		/* size of an EFI memory map descriptor */
+	__u32 efi_memdesc_version;	/* memory descriptor version */
+	struct {
+		__u16 num_cols;	/* number of columns on console output device */
+		__u16 num_rows;	/* number of rows on console output device */
+		__u16 orig_x;	/* cursor's x position */
+		__u16 orig_y;	/* cursor's y position */
+	} console_info;
+	__u64 fpswa;		/* physical address of the fpswa interface */
+	__u64 initrd_start;
+	__u64 initrd_size;
+} *ia64_boot_param;
+
+/*
+ * Macros to force memory ordering.  In these descriptions, "previous"
+ * and "subsequent" refer to program order; "visible" means that all
+ * architecturally visible effects of a memory access have occurred
+ * (at a minimum, this means the memory has been read or written).
+ *
+ *   wmb():	Guarantees that all preceding stores to memory-
+ *		like regions are visible before any subsequent
+ *		stores and that all following stores will be
+ *		visible only after all previous stores.
+ *   rmb():	Like wmb(), but for reads.
+ *   mb():	wmb()/rmb() combo, i.e., all previous memory
+ *		accesses are visible before all subsequent
+ *		accesses and vice versa.  This is also known as
+ *		a "fence."
+ *
+ * Note: "mb()" and its variants cannot be used as a fence to order
+ * accesses to memory mapped I/O registers.  For that, mf.a needs to
+ * be used.  However, we don't want to always use mf.a because (a)
+ * it's (presumably) much slower than mf and (b) mf.a is supported for
+ * sequential memory pages only.
+ */
+#define mb()	ia64_mf()
+#define rmb()	mb()
+#define wmb()	mb()
+#define read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_SMP
+# define smp_mb()	mb()
+# define smp_rmb()	rmb()
+# define smp_wmb()	wmb()
+# define smp_read_barrier_depends()	read_barrier_depends()
+#else
+# define smp_mb()	barrier()
+# define smp_rmb()	barrier()
+# define smp_wmb()	barrier()
+# define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+/*
+ * XXX check on these---I suspect what Linus really wants here is
+ * acquire vs release semantics but we can't discuss this stuff with
+ * Linus just yet.  Grrr...
+ */
+#define set_mb(var, value)	do { (var) = (value); mb(); } while (0)
+#define set_wmb(var, value)	do { (var) = (value); mb(); } while (0)
+
+#define safe_halt()         ia64_pal_halt_light()    /* PAL_HALT_LIGHT */
+
+/*
+ * The group barrier in front of the rsm & ssm are necessary to ensure
+ * that none of the previous instructions in the same group are
+ * affected by the rsm/ssm.
+ */
+/* For spinlocks etc */
+
+/*
+ * - clearing psr.i is implicitly serialized (visible by next insn)
+ * - setting psr.i requires data serialization
+ * - we need a stop-bit before reading PSR because we sometimes
+ *   write a floating-point register right before reading the PSR
+ *   and that writes to PSR.mfl
+ */
+#define __local_irq_save(x)			\
+do {						\
+	ia64_stop();				\
+	(x) = ia64_getreg(_IA64_REG_PSR);	\
+	ia64_stop();				\
+	ia64_rsm(IA64_PSR_I);			\
+} while (0)
+
+#define __local_irq_disable()			\
+do {						\
+	ia64_stop();				\
+	ia64_rsm(IA64_PSR_I);			\
+} while (0)
+
+#define __local_irq_restore(x)	ia64_intrin_local_irq_restore((x) & IA64_PSR_I)
+
+#ifdef CONFIG_IA64_DEBUG_IRQ
+
+  extern unsigned long last_cli_ip;
+
+# define __save_ip()		last_cli_ip = ia64_getreg(_IA64_REG_IP)
+
+# define local_irq_save(x)					\
+do {								\
+	unsigned long psr;					\
+								\
+	__local_irq_save(psr);					\
+	if (psr & IA64_PSR_I)					\
+		__save_ip();					\
+	(x) = psr;						\
+} while (0)
+
+# define local_irq_disable()	do { unsigned long x; local_irq_save(x); } while (0)
+
+# define local_irq_restore(x)					\
+do {								\
+	unsigned long old_psr, psr = (x);			\
+								\
+	local_save_flags(old_psr);				\
+	__local_irq_restore(psr);				\
+	if ((old_psr & IA64_PSR_I) && !(psr & IA64_PSR_I))	\
+		__save_ip();					\
+} while (0)
+
+#else /* !CONFIG_IA64_DEBUG_IRQ */
+# define local_irq_save(x)	__local_irq_save(x)
+# define local_irq_disable()	__local_irq_disable()
+# define local_irq_restore(x)	__local_irq_restore(x)
+#endif /* !CONFIG_IA64_DEBUG_IRQ */
+
+#define local_irq_enable()	({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); })
+#define local_save_flags(flags)	({ ia64_stop(); (flags) = ia64_getreg(_IA64_REG_PSR); })
+
+#define irqs_disabled()				\
+({						\
+	unsigned long __ia64_id_flags;		\
+	local_save_flags(__ia64_id_flags);	\
+	(__ia64_id_flags & IA64_PSR_I) == 0;	\
+})
+
+#ifdef __KERNEL__
+
+#define prepare_to_switch()    do { } while(0)
+
+#ifdef CONFIG_IA32_SUPPORT
+# define IS_IA32_PROCESS(regs)	(ia64_psr(regs)->is != 0)
+#else
+# define IS_IA32_PROCESS(regs)		0
+struct task_struct;
+static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
+static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
+#endif
+
+/*
+ * Context switch from one thread to another.  If the two threads have
+ * different address spaces, schedule() has already taken care of
+ * switching to the new address space by calling switch_mm().
+ *
+ * Disabling access to the fph partition and the debug-register
+ * context switch MUST be done before calling ia64_switch_to() since a
+ * newly created thread returns directly to
+ * ia64_ret_from_syscall_clear_r8.
+ */
+extern struct task_struct *ia64_switch_to (void *next_task);
+
+struct task_struct;
+
+extern void ia64_save_extra (struct task_struct *task);
+extern void ia64_load_extra (struct task_struct *task);
+
+#ifdef CONFIG_PERFMON
+  DECLARE_PER_CPU(unsigned long, pfm_syst_info);
+# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
+#else
+# define PERFMON_IS_SYSWIDE() (0)
+#endif
+
+#define IA64_HAS_EXTRA_STATE(t)							\
+	((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID)	\
+	 || IS_IA32_PROCESS(ia64_task_regs(t)) || PERFMON_IS_SYSWIDE())
+
+#define __switch_to(prev,next,last) do {							 \
+	if (IA64_HAS_EXTRA_STATE(prev))								 \
+		ia64_save_extra(prev);								 \
+	if (IA64_HAS_EXTRA_STATE(next))								 \
+		ia64_load_extra(next);								 \
+	ia64_psr(ia64_task_regs(next))->dfh = !ia64_is_local_fpu_owner(next);			 \
+	(last) = ia64_switch_to((next));							 \
+} while (0)
+
+#ifdef CONFIG_SMP
+/*
+ * In the SMP case, we save the fph state when context-switching away from a thread that
+ * modified fph.  This way, when the thread gets scheduled on another CPU, the CPU can
+ * pick up the state from task->thread.fph, avoiding the complication of having to fetch
+ * the latest fph state from another CPU.  In other words: eager save, lazy restore.
+ */
+# define switch_to(prev,next,last) do {						\
+	if (ia64_psr(ia64_task_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) {				\
+		ia64_psr(ia64_task_regs(prev))->mfh = 0;			\
+		(prev)->thread.flags |= IA64_THREAD_FPH_VALID;			\
+		__ia64_save_fpu((prev)->thread.fph);				\
+	}									\
+	__switch_to(prev, next, last);						\
+} while (0)
+#else
+# define switch_to(prev,next,last)	__switch_to(prev, next, last)
+#endif
+
+/*
+ * On IA-64, we don't want to hold the runqueue's lock during the low-level context-switch,
+ * because that could cause a deadlock.  Here is an example by Erich Focht:
+ *
+ * Example:
+ * CPU#0:
+ * schedule()
+ *    -> spin_lock_irq(&rq->lock)
+ *    -> context_switch()
+ *       -> wrap_mmu_context()
+ *          -> read_lock(&tasklist_lock)
+ *
+ * CPU#1:
+ * sys_wait4() or release_task() or forget_original_parent()
+ *    -> write_lock(&tasklist_lock)
+ *    -> do_notify_parent()
+ *       -> wake_up_parent()
+ *          -> try_to_wake_up()
+ *             -> spin_lock_irq(&parent_rq->lock)
+ *
+ * If the parent's rq happens to be on CPU#0, we'll wait for the rq->lock
+ * of that CPU which will not be released, because there we wait for the
+ * tasklist_lock to become available.
+ */
+#define prepare_arch_switch(rq, next)		\
+do {						\
+	spin_lock(&(next)->switch_lock);	\
+	spin_unlock(&(rq)->lock);		\
+} while (0)
+#define finish_arch_switch(rq, prev)	spin_unlock_irq(&(prev)->switch_lock)
+#define task_running(rq, p) 		((rq)->curr == (p) || spin_is_locked(&(p)->switch_lock))
+
+#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
+
+void cpu_idle_wait(void);
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_SYSTEM_H */