summaryrefslogtreecommitdiff
path: root/drivers/watchdog
diff options
context:
space:
mode:
authorWim Van Sebroeck <wim@iguana.be>2009-03-18 08:35:09 +0000
committerWim Van Sebroeck <wim@iguana.be>2009-03-25 09:07:04 +0000
commit143a2e54bf53216674eada16e8953f48b159e08a (patch)
tree009497fad6a7d28aae80f490007ce78736afb82c /drivers/watchdog
parentd5c26a597782d4109869abbcc36983969f964864 (diff)
[WATCHDOG] More coding-style and trivial clean-up
Some more cleaning-up of the watchdog drivers. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Diffstat (limited to 'drivers/watchdog')
-rw-r--r--drivers/watchdog/acquirewdt.c8
-rw-r--r--drivers/watchdog/advantechwdt.c7
-rw-r--r--drivers/watchdog/alim1535_wdt.c20
-rw-r--r--drivers/watchdog/alim7101_wdt.c6
-rw-r--r--drivers/watchdog/at91sam9_wdt.c2
-rw-r--r--drivers/watchdog/eurotechwdt.c22
-rw-r--r--drivers/watchdog/geodewdt.c11
-rw-r--r--drivers/watchdog/hpwdt.c3
-rw-r--r--drivers/watchdog/i6300esb.c3
-rw-r--r--drivers/watchdog/iTCO_vendor_support.c6
-rw-r--r--drivers/watchdog/iTCO_wdt.c15
-rw-r--r--drivers/watchdog/it87_wdt.c12
-rw-r--r--drivers/watchdog/mpc5200_wdt.c4
-rw-r--r--drivers/watchdog/mpcore_wdt.c2
-rw-r--r--drivers/watchdog/mtx-1_wdt.c2
-rw-r--r--drivers/watchdog/pc87413_wdt.c6
-rw-r--r--drivers/watchdog/pcwd.c44
-rw-r--r--drivers/watchdog/pcwd_pci.c108
-rw-r--r--drivers/watchdog/pcwd_usb.c171
-rw-r--r--drivers/watchdog/pnx4008_wdt.c18
-rw-r--r--drivers/watchdog/riowd.c3
-rw-r--r--drivers/watchdog/sa1100_wdt.c6
-rw-r--r--drivers/watchdog/sbc60xxwdt.c2
-rw-r--r--drivers/watchdog/sbc8360.c12
-rw-r--r--drivers/watchdog/sbc_epx_c3.c3
-rw-r--r--drivers/watchdog/sc1200wdt.c7
-rw-r--r--drivers/watchdog/sc520_wdt.c9
-rw-r--r--drivers/watchdog/smsc37b787_wdt.c30
-rw-r--r--drivers/watchdog/softdog.c5
-rw-r--r--drivers/watchdog/w83697hf_wdt.c3
-rw-r--r--drivers/watchdog/w83697ug_wdt.c2
-rw-r--r--drivers/watchdog/w83977f_wdt.c2
-rw-r--r--drivers/watchdog/wd501p.h24
-rw-r--r--drivers/watchdog/wdt977.c2
34 files changed, 344 insertions, 236 deletions
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
index 3e57aa4d643..4d18c874d96 100644
--- a/drivers/watchdog/acquirewdt.c
+++ b/drivers/watchdog/acquirewdt.c
@@ -1,7 +1,7 @@
/*
* Acquire Single Board Computer Watchdog Timer driver
*
- * Based on wdt.c. Original copyright messages:
+ * Based on wdt.c. Original copyright messages:
*
* (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
* All Rights Reserved.
@@ -17,9 +17,9 @@
*
* (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
- * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
- * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
- * Can't add timeout - driver doesn't allow changing value
+ * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ * Can't add timeout - driver doesn't allow changing value
*/
/*
diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c
index a1d7856ea6e..824d076a5cd 100644
--- a/drivers/watchdog/advantechwdt.c
+++ b/drivers/watchdog/advantechwdt.c
@@ -138,7 +138,9 @@ static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
void __user *argp = (void __user *)arg;
int __user *p = argp;
static struct watchdog_info ident = {
- .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+ .options = WDIOF_KEEPALIVEPING |
+ WDIOF_SETTIMEOUT |
+ WDIOF_MAGICCLOSE,
.firmware_version = 1,
.identity = WATCHDOG_NAME,
};
@@ -259,7 +261,8 @@ static int __devinit advwdt_probe(struct platform_device *dev)
goto unreg_stop;
}
- /* Check that the heartbeat value is within it's range ; if not reset to the default */
+ /* Check that the heartbeat value is within it's range ;
+ * if not reset to the default */
if (advwdt_set_heartbeat(timeout)) {
advwdt_set_heartbeat(WATCHDOG_TIMEOUT);
printk(KERN_INFO PFX
diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c
index 2a7690ecf97..937a80fb61e 100644
--- a/drivers/watchdog/alim1535_wdt.c
+++ b/drivers/watchdog/alim1535_wdt.c
@@ -60,7 +60,7 @@ static void ali_start(void)
pci_read_config_dword(ali_pci, 0xCC, &val);
val &= ~0x3F; /* Mask count */
- val |= (1<<25) | ali_timeout_bits;
+ val |= (1 << 25) | ali_timeout_bits;
pci_write_config_dword(ali_pci, 0xCC, val);
spin_unlock(&ali_lock);
@@ -79,8 +79,8 @@ static void ali_stop(void)
spin_lock(&ali_lock);
pci_read_config_dword(ali_pci, 0xCC, &val);
- val &= ~0x3F; /* Mask count to zero (disabled) */
- val &= ~(1<<25);/* and for safety mask the reset enable */
+ val &= ~0x3F; /* Mask count to zero (disabled) */
+ val &= ~(1 << 25); /* and for safety mask the reset enable */
pci_write_config_dword(ali_pci, 0xCC, val);
spin_unlock(&ali_lock);
@@ -89,7 +89,7 @@ static void ali_stop(void)
/*
* ali_keepalive - send a keepalive to the watchdog
*
- * Send a keepalive to the timer (actually we restart the timer).
+ * Send a keepalive to the timer (actually we restart the timer).
*/
static void ali_keepalive(void)
@@ -109,11 +109,11 @@ static int ali_settimer(int t)
if (t < 0)
return -EINVAL;
else if (t < 60)
- ali_timeout_bits = t|(1<<6);
+ ali_timeout_bits = t|(1 << 6);
else if (t < 3600)
- ali_timeout_bits = (t/60)|(1<<7);
+ ali_timeout_bits = (t / 60)|(1 << 7);
else if (t < 18000)
- ali_timeout_bits = (t/300)|(1<<6)|(1<<7);
+ ali_timeout_bits = (t / 300)|(1 << 6)|(1 << 7);
else
return -EINVAL;
@@ -138,7 +138,7 @@ static int ali_settimer(int t)
*/
static ssize_t ali_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
+ size_t len, loff_t *ppos)
{
/* See if we got the magic character 'V' and reload the timer */
if (len) {
@@ -348,9 +348,9 @@ static int __init ali_find_watchdog(void)
/* Timer bits */
wdog &= ~0x3F;
/* Issued events */
- wdog &= ~((1<<27)|(1<<26)|(1<<25)|(1<<24));
+ wdog &= ~((1 << 27)|(1 << 26)|(1 << 25)|(1 << 24));
/* No monitor bits */
- wdog &= ~((1<<16)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9));
+ wdog &= ~((1 << 16)|(1 << 13)|(1 << 12)|(1 << 11)|(1 << 10)|(1 << 9));
pci_write_config_dword(pdev, 0xCC, wdog);
diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c
index a045ef86943..90f98df5f10 100644
--- a/drivers/watchdog/alim7101_wdt.c
+++ b/drivers/watchdog/alim7101_wdt.c
@@ -355,7 +355,8 @@ static int __init alim7101_wdt_init(void)
alim7101_pmu = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,
NULL);
if (!alim7101_pmu) {
- printk(KERN_INFO PFX "ALi M7101 PMU not present - WDT not set\n");
+ printk(KERN_INFO PFX
+ "ALi M7101 PMU not present - WDT not set\n");
return -EBUSY;
}
@@ -399,7 +400,8 @@ static int __init alim7101_wdt_init(void)
rc = misc_register(&wdt_miscdev);
if (rc) {
- printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ printk(KERN_ERR PFX
+ "cannot register miscdev on minor=%d (err=%d)\n",
wdt_miscdev.minor, rc);
goto err_out_reboot;
}
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index a56ac84381b..435b0573fb0 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -201,7 +201,7 @@ static long at91_wdt_ioctl(struct file *file,
* Pat the watchdog whenever device is written to.
*/
static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len,
- loff_t *ppos)
+ loff_t *ppos)
{
if (!len)
return 0;
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
index a171fc6ae1c..9add3541fb4 100644
--- a/drivers/watchdog/eurotechwdt.c
+++ b/drivers/watchdog/eurotechwdt.c
@@ -8,19 +8,19 @@
* Based on wdt.c.
* Original copyright messages:
*
- * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
* All Rights Reserved.
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
*
- * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
+ * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
*
- * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>*
+ * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>*
*/
/* Changelog:
@@ -37,7 +37,7 @@
* add expect_close support
*
* 2002.05.30 - Joel Becker <joel.becker@oracle.com>
- * Added Matt Domsch's nowayout module option.
+ * Added Matt Domsch's nowayout module option.
*/
/*
@@ -151,7 +151,7 @@ static void eurwdt_activate_timer(void)
if (irq == 0)
printk(KERN_INFO ": interrupt disabled\n");
- eurwdt_write_reg(WDT_TIMER_CFG, irq<<4);
+ eurwdt_write_reg(WDT_TIMER_CFG, irq << 4);
eurwdt_write_reg(WDT_UNIT_SEL, WDT_UNIT_SECS); /* we use seconds */
eurwdt_set_timeout(0); /* the default timeout */
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
index 6799a6de66f..9acf0015a1e 100644
--- a/drivers/watchdog/geodewdt.c
+++ b/drivers/watchdog/geodewdt.c
@@ -34,11 +34,15 @@
static int timeout = WATCHDOG_TIMEOUT;
module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=131, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout,
+ "Watchdog timeout in seconds. 1<= timeout <=131, default="
+ __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
static struct platform_device *geodewdt_platform_device;
static unsigned long wdt_flags;
@@ -269,7 +273,8 @@ static int __init geodewdt_init(void)
if (ret)
return ret;
- geodewdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+ geodewdt_platform_device = platform_device_register_simple(DRV_NAME,
+ -1, NULL, 0);
if (IS_ERR(geodewdt_platform_device)) {
ret = PTR_ERR(geodewdt_platform_device);
goto err;
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 7cf32ad96fd..6cf155d6b35 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -137,7 +137,8 @@ static struct pci_device_id hpwdt_devices[] = {
};
MODULE_DEVICE_TABLE(pci, hpwdt_devices);
-extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, unsigned long *pRomEntry);
+extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
+ unsigned long *pRomEntry);
#ifndef CONFIG_X86_64
/* --32 Bit Bios------------------------------------------------------------ */
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index 74f951c18b9..97ac6bf4222 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -240,7 +240,8 @@ static ssize_t esb_write(struct file *file, const char __user *data,
* five months ago... */
esb_expect_close = 0;
- /* scan to see whether or not we got the magic character */
+ /* scan to see whether or not we got the
+ * magic character */
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data + i))
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index d8264ad0be4..d3c0f6de552 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -47,7 +47,8 @@
static int vendorsupport;
module_param(vendorsupport, int, 0);
-MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+");
+MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default="
+ "0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+");
/*
* Vendor Specific Support
@@ -305,7 +306,8 @@ static void __exit iTCO_vendor_exit_module(void)
module_init(iTCO_vendor_init_module);
module_exit(iTCO_vendor_exit_module);
-MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, R. Seretny <lkpatches@paypc.com>");
+MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, "
+ "R. Seretny <lkpatches@paypc.com>");
MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support");
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 352334947ea..648250b998c 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -273,7 +273,9 @@ static struct platform_device *iTCO_wdt_platform_device;
#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
+ "(2<heartbeat<39 (TCO v1) or 613 (TCO v2), default="
+ __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
@@ -346,7 +348,8 @@ static int iTCO_wdt_start(void)
/* disable chipset's NO_REBOOT bit */
if (iTCO_wdt_unset_NO_REBOOT_bit()) {
spin_unlock(&iTCO_wdt_private.io_lock);
- printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
+ printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, "
+ "reboot disabled by hardware\n");
return -EIO;
}
@@ -669,7 +672,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
/* Check chipset's NO_REBOOT bit */
if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
- printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
+ printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, "
+ "reboot disabled by hardware\n");
ret = -ENODEV; /* Cannot reset NO_REBOOT bit */
goto out;
}
@@ -716,8 +720,9 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
if not reset to the default */
if (iTCO_wdt_set_heartbeat(heartbeat)) {
iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT);
- printk(KERN_INFO PFX "heartbeat value must be 2 < heartbeat < 39 (TCO v1) or 613 (TCO v2), using %d\n",
- heartbeat);
+ printk(KERN_INFO PFX
+ "heartbeat value must be 2 < heartbeat < 39 (TCO v1) "
+ "or 613 (TCO v2), using %d\n", heartbeat);
}
ret = misc_register(&iTCO_wdt_miscdev);
diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
index afb8af397a9..cc133c531d0 100644
--- a/drivers/watchdog/it87_wdt.c
+++ b/drivers/watchdog/it87_wdt.c
@@ -188,8 +188,8 @@ static inline int superio_inb(int reg)
static inline void superio_outb(int val, int reg)
{
- outb(reg, REG);
- outb(val, VAL);
+ outb(reg, REG);
+ outb(val, VAL);
}
static inline int superio_inw(int reg)
@@ -204,10 +204,10 @@ static inline int superio_inw(int reg)
static inline void superio_outw(int val, int reg)
{
- outb(reg++, REG);
- outb(val >> 8, VAL);
- outb(reg, REG);
- outb(val, VAL);
+ outb(reg++, REG);
+ outb(val >> 8, VAL);
+ outb(reg, REG);
+ outb(val, VAL);
}
/* watchdog timer handling */
diff --git a/drivers/watchdog/mpc5200_wdt.c b/drivers/watchdog/mpc5200_wdt.c
index db91892558f..465fe36adad 100644
--- a/drivers/watchdog/mpc5200_wdt.c
+++ b/drivers/watchdog/mpc5200_wdt.c
@@ -9,8 +9,8 @@
#include <asm/mpc52xx.h>
-#define GPT_MODE_WDT (1<<15)
-#define GPT_MODE_CE (1<<12)
+#define GPT_MODE_WDT (1 << 15)
+#define GPT_MODE_CE (1 << 12)
#define GPT_MODE_MS_TIMER (0x4)
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index 1130ad697ce..1512ab8b175 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -5,7 +5,7 @@
*
* Based on the SoftDog driver:
* (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
- * All Rights Reserved.
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 3acce623f20..539b6f6ba7f 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -5,7 +5,7 @@
* All Rights Reserved.
* http://www.4g-systems.biz
*
- * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 484c215e9f3..1a2b916e3f8 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -536,7 +536,8 @@ static int __init pc87413_init(void)
ret = misc_register(&pc87413_miscdev);
if (ret != 0) {
- printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ printk(KERN_ERR PFX
+ "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
unregister_reboot_notifier(&pc87413_notifier);
return ret;
@@ -574,7 +575,8 @@ static void __exit pc87413_exit(void)
module_init(pc87413_init);
module_exit(pc87413_exit);
-MODULE_AUTHOR("Sven Anders <anders@anduras.de>, Marcus Junker <junker@anduras.de>,");
+MODULE_AUTHOR("Sven Anders <anders@anduras.de>, "
+ "Marcus Junker <junker@anduras.de>,");
MODULE_DESCRIPTION("PC87413 WDT driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c
index 9e1331a3b21..aa9512321f3 100644
--- a/drivers/watchdog/pcwd.c
+++ b/drivers/watchdog/pcwd.c
@@ -24,25 +24,25 @@
* version reporting. Added read routine for temperature.
* Removed some extra defines, added an autodetect Revision
* routine.
- * 961006 Revised some documentation, fixed some cosmetic bugs. Made
- * drivers to panic the system if it's overheating at bootup.
+ * 961006 Revised some documentation, fixed some cosmetic bugs. Made
+ * drivers to panic the system if it's overheating at bootup.
* 961118 Changed some verbiage on some of the output, tidied up
* code bits, and added compatibility to 2.1.x.
- * 970912 Enabled board on open and disable on close.
+ * 970912 Enabled board on open and disable on close.
* 971107 Took account of recent VFS changes (broke read).
- * 971210 Disable board on initialisation in case board already ticking.
- * 971222 Changed open/close for temperature handling
- * Michael Meskes <meskes@debian.org>.
- * 980112 Used minor numbers from include/linux/miscdevice.h
- * 990403 Clear reset status after reading control status register in
- * pcwd_showprevstate(). [Marc Boucher <marc@mbsi.ca>]
+ * 971210 Disable board on initialisation in case board already ticking.
+ * 971222 Changed open/close for temperature handling
+ * Michael Meskes <meskes@debian.org>.
+ * 980112 Used minor numbers from include/linux/miscdevice.h
+ * 990403 Clear reset status after reading control status register in
+ * pcwd_showprevstate(). [Marc Boucher <marc@mbsi.ca>]
* 990605 Made changes to code to support Firmware 1.22a, added
* fairly useless proc entry.
* 990610 removed said useless proc code for the merge <alan>
* 000403 Removed last traces of proc code. <davej>
* 011214 Added nowayout module option to override
* CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com>
- * Added timeout module option to override default
+ * Added timeout module option to override default
*/
/*
@@ -76,8 +76,7 @@
#define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog"
#define WATCHDOG_NAME "pcwd"
#define PFX WATCHDOG_NAME ": "
-#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION " (" WATCHDOG_DATE ")\n"
-#define WD_VER WATCHDOG_VERSION " (" WATCHDOG_DATE ")"
+#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION "\n"
/*
* It should be noted that PCWD_REVISION_B was removed because A and B
@@ -200,7 +199,9 @@ MODULE_PARM_DESC(debug,
#define WATCHDOG_HEARTBEAT 0
static int heartbeat = WATCHDOG_HEARTBEAT;
module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
+ "(2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default="
+ __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
@@ -239,7 +240,8 @@ static int send_isa_command(int cmd)
}
if (debug >= DEBUG)
- printk(KERN_DEBUG PFX "received following data for cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n",
+ printk(KERN_DEBUG PFX "received following data for "
+ "cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n",
cmd, port0, last_port0);
return port0;
@@ -339,10 +341,12 @@ static void pcwd_show_card_info(void)
pcwd_private.io_addr);
else if (pcwd_private.revision == PCWD_REVISION_C) {
pcwd_get_firmware();
- printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n",
+ printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port "
+ "0x%04x (Firmware version: %s)\n",
pcwd_private.io_addr, pcwd_private.fw_ver_str);
option_switches = pcwd_get_option_switches();
- printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
+ printk(KERN_INFO PFX "Option switches (0x%02x): "
+ "Temperature Reset Enable=%s, Power On Delay=%s\n",
option_switches,
((option_switches & 0x10) ? "ON" : "OFF"),
((option_switches & 0x08) ? "ON" : "OFF"));
@@ -358,7 +362,8 @@ static void pcwd_show_card_info(void)
printk(KERN_INFO PFX "Temperature Option Detected\n");
if (pcwd_private.boot_status & WDIOF_CARDRESET)
- printk(KERN_INFO PFX "Previous reboot was caused by the card\n");
+ printk(KERN_INFO PFX
+ "Previous reboot was caused by the card\n");
if (pcwd_private.boot_status & WDIOF_OVERHEAT) {
printk(KERN_EMERG PFX
@@ -871,7 +876,7 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
cards_found++;
if (cards_found == 1)
printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n",
- WD_VER);
+ WATCHDOG_VERSION);
if (cards_found > 1) {
printk(KERN_ERR PFX "This driver only supports 1 device\n");
@@ -1026,7 +1031,8 @@ static void __exit pcwd_cleanup_module(void)
module_init(pcwd_init_module);
module_exit(pcwd_cleanup_module);
-MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>, Wim Van Sebroeck <wim@iguana.be>");
+MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>, "
+ "Wim Van Sebroeck <wim@iguana.be>");
MODULE_DESCRIPTION("Berkshire ISA-PC Watchdog driver");
MODULE_VERSION(WATCHDOG_VERSION);
MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c
index 5d76422c402..698f51bff1b 100644
--- a/drivers/watchdog/pcwd_pci.c
+++ b/drivers/watchdog/pcwd_pci.c
@@ -24,7 +24,8 @@
* A bells and whistles driver is available from:
* http://www.kernel.org/pub/linux/kernel/people/wim/pcwd/pcwd_pci/
*
- * More info available at http://www.berkprod.com/ or http://www.pcwatchdog.com/
+ * More info available at
+ * http://www.berkprod.com/ or http://www.pcwatchdog.com/
*/
/*
@@ -51,11 +52,10 @@
/* Module and version information */
#define WATCHDOG_VERSION "1.03"
-#define WATCHDOG_DATE "21 Jan 2007"
#define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog"
#define WATCHDOG_NAME "pcwd_pci"
#define PFX WATCHDOG_NAME ": "
-#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION " (" WATCHDOG_DATE ")\n"
+#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION "\n"
/* Stuff for the PCI ID's */
#ifndef PCI_VENDOR_ID_QUICKLOGIC
@@ -76,7 +76,8 @@
#define WD_PCI_TTRP 0x04 /* Temperature Trip status */
#define WD_PCI_RL2A 0x08 /* Relay 2 Active */
#define WD_PCI_RL1A 0x10 /* Relay 1 Active */
-#define WD_PCI_R2DS 0x40 /* Relay 2 Disable Temperature-trip/reset */
+#define WD_PCI_R2DS 0x40 /* Relay 2 Disable Temperature-trip /
+ reset */
#define WD_PCI_RLY2 0x80 /* Activate Relay 2 on the board */
/* Port 2 : Control Status #2 */
#define WD_PCI_WDIS 0x10 /* Watchdog Disable */
@@ -114,12 +115,18 @@ static int cards_found;
static int temp_panic;
static unsigned long is_active;
static char expect_release;
-static struct { /* this is private data for each PCI-PC watchdog card */
- int supports_temp; /* Wether or not the card has a temperature device */
- int boot_status; /* The card's boot status */
- unsigned long io_addr; /* The cards I/O address */
- spinlock_t io_lock; /* the lock for io operations */
- struct pci_dev *pdev; /* the PCI-device */
+/* this is private data for each PCI-PC watchdog card */
+static struct {
+ /* Wether or not the card has a temperature device */
+ int supports_temp;
+ /* The card's boot status */
+ int boot_status;
+ /* The cards I/O address */
+ unsigned long io_addr;
+ /* the lock for io operations */
+ spinlock_t io_lock;
+ /* the PCI-device */
+ struct pci_dev *pdev;
} pcipcwd_private;
/* module parameters */
@@ -130,14 +137,18 @@ static int debug = QUIET;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
-#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = delay-time from dip-switches */
+#define WATCHDOG_HEARTBEAT 0 /* default heartbeat =
+ delay-time from dip-switches */
static int heartbeat = WATCHDOG_HEARTBEAT;
module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
+ "(0<heartbeat<65536 or 0=delay-time from dip-switches, default="
+ __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/*
* Internal functions
@@ -148,8 +159,8 @@ static int send_command(int cmd, int *msb, int *lsb)
int got_response, count;
if (debug >= DEBUG)
- printk(KERN_DEBUG PFX "sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x\n",
- cmd, *msb, *lsb);
+ printk(KERN_DEBUG PFX "sending following data "
+ "cmd=0x%02x msb=0x%02x lsb=0x%02x\n", cmd, *msb, *lsb);
spin_lock(&pcipcwd_private.io_lock);
/* If a command requires data it should be written first.
@@ -166,17 +177,20 @@ static int send_command(int cmd, int *msb, int *lsb)
* the WRSP bit in port 2 and give it a max. timeout of
* PCI_COMMAND_TIMEOUT to process */
got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP;
- for (count = 0; (count < PCI_COMMAND_TIMEOUT) && (!got_response); count++) {
+ for (count = 0; (count < PCI_COMMAND_TIMEOUT) && (!got_response);
+ count++) {
mdelay(1);
got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP;
}
if (debug >= DEBUG) {
if (got_response) {
- printk(KERN_DEBUG PFX "time to process command was: %d ms\n",
+ printk(KERN_DEBUG PFX
+ "time to process command was: %d ms\n",
count);
} else {
- printk(KERN_DEBUG PFX "card did not respond on command!\n");
+ printk(KERN_DEBUG PFX
+ "card did not respond on command!\n");
}
}
@@ -189,7 +203,8 @@ static int send_command(int cmd, int *msb, int *lsb)
inb_p(pcipcwd_private.io_addr + 6);
if (debug >= DEBUG)
- printk(KERN_DEBUG PFX "received following data for cmd=0x%02x: msb=0x%02x lsb=0x%02x\n",
+ printk(KERN_DEBUG PFX "received following data for "
+ "cmd=0x%02x: msb=0x%02x lsb=0x%02x\n",
cmd, *msb, *lsb);
}
@@ -218,7 +233,8 @@ static void pcipcwd_show_card_info(void)
char fw_ver_str[20]; /* The cards firmware version */
int option_switches;
- got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor);
+ got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major,
+ &fw_rev_minor);
if (got_fw_rev)
sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
else
@@ -227,23 +243,27 @@ static void pcipcwd_show_card_info(void)
/* Get switch settings */
option_switches = pcipcwd_get_option_switches();
- printk(KERN_INFO PFX "Found card at port 0x%04x (Firmware: %s) %s temp option\n",
+ printk(KERN_INFO PFX "Found card at port "
+ "0x%04x (Firmware: %s) %s temp option\n",
(int) pcipcwd_private.io_addr, fw_ver_str,
(pcipcwd_private.supports_temp ? "with" : "without"));
- printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
+ printk(KERN_INFO PFX "Option switches (0x%02x): "
+ "Temperature Reset Enable=%s, Power On Delay=%s\n",
option_switches,
((option_switches & 0x10) ? "ON" : "OFF"),
((option_switches & 0x08) ? "ON" : "OFF"));
if (pcipcwd_private.boot_status & WDIOF_CARDRESET)
- printk(KERN_INFO PFX "Previous reset was caused by the Watchdog card\n");
+ printk(KERN_INFO PFX
+ "Previous reset was caused by the Watchdog card\n");
if (pcipcwd_private.boot_status & WDIOF_OVERHEAT)
printk(KERN_INFO PFX "Card sensed a CPU Overheat\n");
if (pcipcwd_private.boot_status == 0)
- printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n");
+ printk(KERN_INFO PFX
+ "No previous trip detected - Cold boot or reset\n");
}
static int pcipcwd_start(void)
@@ -283,7 +303,8 @@ static int pcipcwd_stop(void)
spin_unlock(&pcipcwd_private.io_lock);
if (!(stat_reg & WD_PCI_WDIS)) {
- printk(KERN_ERR PFX "Card did not acknowledge disable attempt\n");
+ printk(KERN_ERR PFX
+ "Card did not acknowledge disable attempt\n");
return -1;
}
@@ -364,7 +385,8 @@ static int pcipcwd_clear_status(void)
}
/* clear trip status & LED and keep mode of relay 2 */
- outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP, pcipcwd_private.io_addr + 1);
+ outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP,
+ pcipcwd_private.io_addr + 1);
/* clear reset counter */
msb = 0;
@@ -437,7 +459,8 @@ static ssize_t pcipcwd_write(struct file *file, const char __user *data,
* five months ago... */
expect_release = 0;
- /* scan to see whether or not we got the magic character */
+ /* scan to see whether or not we got the
+ * magic character */
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data + i))
@@ -531,7 +554,7 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd,
return -EFAULT;
if (pcipcwd_set_heartbeat(new_heartbeat))
- return -EINVAL;
+ return -EINVAL;
pcipcwd_keepalive();
/* Fall */
@@ -560,7 +583,8 @@ static int pcipcwd_open(struct inode *inode, struct file *file)
/* /dev/watchdog can only be opened once */
if (test_and_set_bit(0, &is_active)) {
if (debug >= VERBOSE)
- printk(KERN_ERR PFX "Attempt to open already opened device.\n");
+ printk(KERN_ERR PFX
+ "Attempt to open already opened device.\n");
return -EBUSY;
}
@@ -578,7 +602,8 @@ static int pcipcwd_release(struct inode *inode, struct file *file)
if (expect_release == 42) {
pcipcwd_stop();
} else {
- printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ printk(KERN_CRIT PFX
+ "Unexpected close, not stopping watchdog!\n");
pcipcwd_keepalive();
}
expect_release = 0;
@@ -621,7 +646,8 @@ static int pcipcwd_temp_release(struct inode *inode, struct file *file)
* Notify system
*/
-static int pcipcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int pcipcwd_notify_sys(struct notifier_block *this, unsigned long code,
+ void *unused)
{
if (code == SYS_DOWN || code == SYS_HALT)
pcipcwd_stop(); /* Turn the WDT off */
@@ -722,34 +748,38 @@ static int __devinit pcipcwd_card_init(struct pci_dev *pdev,
/* If heartbeat = 0 then we use the heartbeat from the dip-switches */
if (heartbeat == 0)
- heartbeat = heartbeat_tbl[(pcipcwd_get_option_switches() & 0x07)];
+ heartbeat =
+ heartbeat_tbl[(pcipcwd_get_option_switches() & 0x07)];
- /* Check that the heartbeat value is within it's range ; if not reset to the default */
+ /* Check that the heartbeat value is within it's range ;
+ * if not reset to the default */
if (pcipcwd_set_heartbeat(heartbeat)) {
pcipcwd_set_heartbeat(WATCHDOG_HEARTBEAT);
- printk(KERN_INFO PFX "heartbeat value must be 0<heartbeat<65536, using %d\n",
+ printk(KERN_INFO PFX
+ "heartbeat value must be 0<heartbeat<65536, using %d\n",
WATCHDOG_HEARTBEAT);
}
ret = register_reboot_notifier(&pcipcwd_notifier);
if (ret != 0) {
- printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
- ret);
+ printk(KERN_ERR PFX
+ "cannot register reboot notifier (err=%d)\n", ret);
goto err_out_release_region;
}
if (pcipcwd_private.supports_temp) {
ret = misc_register(&pcipcwd_temp_miscdev);
if (ret != 0) {
- printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
- TEMP_MINOR, ret);
+ printk(KERN_ERR PFX "cannot register miscdev on "
+ "minor=%d (err=%d)\n", TEMP_MINOR, ret);
goto err_out_unregister_reboot;
}
}
ret = misc_register(&pcipcwd_miscdev);
if (ret != 0) {
- printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ printk(KERN_ERR PFX
+ "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
goto err_out_misc_deregister;
}
diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c
index b5320a8e745..052fe451851 100644
--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -51,12 +51,11 @@
/* Use our own dbg macro */
#undef dbg
-#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG PFX format "\n" , ## arg); } while (0)
-
+#define dbg(format, arg...) \
+ do { if (debug) printk(KERN_DEBUG PFX format "\n" , ## arg); } while (0)
/* Module and Version Information */
#define DRIVER_VERSION "1.02"
-#define DRIVER_DATE "21 Jan 2007"
#define DRIVER_AUTHOR "Wim Van Sebroeck <wim@iguana.be>"
#define DRIVER_DESC "Berkshire USB-PC Watchdog driver"
#define DRIVER_LICENSE "GPL"
@@ -73,14 +72,18 @@ MODULE_ALIAS_MISCDEV(TEMP_MINOR);
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = delay-time from dip-switches */
+#define WATCHDOG_HEARTBEAT 0 /* default heartbeat =
+ delay-time from dip-switches */
static int heartbeat = WATCHDOG_HEARTBEAT;
module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
+ "(0<heartbeat<65536 or 0=delay-time from dip-switches, default="
+ __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/* The vendor and product id's for the USB-PC Watchdog card */
#define USB_PCWD_VENDOR_ID 0x0c98
@@ -91,20 +94,21 @@ static struct usb_device_id usb_pcwd_table[] = {
{ USB_DEVICE(USB_PCWD_VENDOR_ID, USB_PCWD_PRODUCT_ID) },
{ } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, usb_pcwd_table);
+MODULE_DEVICE_TABLE(usb, usb_pcwd_table);
/* according to documentation max. time to process a command for the USB
* watchdog card is 100 or 200 ms, so we give it 250 ms to do it's job */
#define USB_COMMAND_TIMEOUT 250
/* Watchdog's internal commands */
-#define CMD_READ_TEMP 0x02 /* Read Temperature; Re-trigger Watchdog */
+#define CMD_READ_TEMP 0x02 /* Read Temperature;
+ Re-trigger Watchdog */
#define CMD_TRIGGER CMD_READ_TEMP
#define CMD_GET_STATUS 0x04 /* Get Status Information */
#define CMD_GET_FIRMWARE_VERSION 0x08 /* Get Firmware Version */
#define CMD_GET_DIP_SWITCH_SETTINGS 0x0c /* Get Dip Switch Settings */
#define CMD_READ_WATCHDOG_TIMEOUT 0x18 /* Read Current Watchdog Time */
-#define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 /* Write Current Watchdog Time */
+#define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 /* Write Current WatchdogTime */
#define CMD_ENABLE_WATCHDOG 0x30 /* Enable / Disable Watchdog */
#define CMD_DISABLE_WATCHDOG CMD_ENABLE_WATCHDOG
@@ -129,23 +133,36 @@ static char expect_release;
/* Structure to hold all of our device specific stuff */
struct usb_pcwd_private {
- struct usb_device *udev; /* save off the usb device pointer */
- struct usb_interface *interface; /* the interface for this device */
-
- unsigned int interface_number; /* the interface number used for cmd's */
-
- unsigned char *intr_buffer; /* the buffer to intr data */
- dma_addr_t intr_dma; /* the dma address for the intr buffer */
- size_t intr_size; /* the size of the intr buffer */
- struct urb *intr_urb; /* the urb used for the intr pipe */
-
- unsigned char cmd_command; /* The command that is reported back */
- unsigned char cmd_data_msb; /* The data MSB that is reported back */
- unsigned char cmd_data_lsb; /* The data LSB that is reported back */
- atomic_t cmd_received; /* true if we received a report after a command */
-
- int exists; /* Wether or not the device exists */
- struct mutex mtx; /* locks this structure */
+ /* save off the usb device pointer */
+ struct usb_device *udev;
+ /* the interface for this device */
+ struct usb_interface *interface;
+
+ /* the interface number used for cmd's */
+ unsigned int interface_number;
+
+ /* the buffer to intr data */
+ unsigned char *intr_buffer;
+ /* the dma address for the intr buffer */
+ dma_addr_t intr_dma;
+ /* the size of the intr buffer */
+ size_t intr_size;
+ /* the urb used for the intr pipe */
+ struct urb *intr_urb;
+
+ /* The command that is reported back */
+ unsigned char cmd_command;
+ /* The data MSB that is reported back */
+ unsigned char cmd_data_msb;
+ /* The data LSB that is reported back */
+ unsigned char cmd_data_lsb;
+ /* true if we received a report after a command */
+ atomic_t cmd_received;
+
+ /* Wether or not the device exists */
+ int exists;
+ /* locks this structure */
+ struct mutex mtx;
};
static struct usb_pcwd_private *usb_pcwd_device;
@@ -153,7 +170,8 @@ static struct usb_pcwd_private *usb_pcwd_device;
static DEFINE_MUTEX(disconnect_mutex);
/* local function prototypes */
-static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_device_id *id);
+static int usb_pcwd_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
static void usb_pcwd_disconnect(struct usb_interface *interface);
/* usb specific object needed to register this driver with the usb subsystem */
@@ -167,7 +185,8 @@ static struct usb_driver usb_pcwd_driver = {
static void usb_pcwd_intr_done(struct urb *urb)
{
- struct usb_pcwd_private *usb_pcwd = (struct usb_pcwd_private *)urb->context;
+ struct usb_pcwd_private *usb_pcwd =
+ (struct usb_pcwd_private *)urb->context;
unsigned char *data = usb_pcwd->intr_buffer;
int retval;
@@ -178,11 +197,13 @@ static void usb_pcwd_intr_done(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __func__, urb->status);
+ dbg("%s - urb shutting down with status: %d", __func__,
+ urb->status);
return;
/* -EPIPE: should clear the halt */
default: /* error */
- dbg("%s - nonzero urb status received: %d", __func__, urb->status);
+ dbg("%s - nonzero urb status received: %d", __func__,
+ urb->status);
goto resubmit;
}
@@ -199,22 +220,23 @@ static void usb_pcwd_intr_done(struct urb *urb)
resubmit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
- printk(KERN_ERR PFX "can't resubmit intr, usb_submit_urb failed with result %d\n",
- retval);
+ printk(KERN_ERR PFX "can't resubmit intr, "
+ "usb_submit_urb failed with result %d\n", retval);
}
-static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned char cmd,
- unsigned char *msb, unsigned char *lsb)
+static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd,
+ unsigned char cmd, unsigned char *msb, unsigned char *lsb)
{
int got_response, count;
unsigned char buf[6];
- /* We will not send any commands if the USB PCWD device does not exist */
+ /* We will not send any commands if the USB PCWD device does
+ * not exist */
if ((!usb_pcwd) || (!usb_pcwd->exists))
return -1;
- /* The USB PC Watchdog uses a 6 byte report format. The board currently uses
- * only 3 of the six bytes of the report. */
+ /* The USB PC Watchdog uses a 6 byte report format.
+ * The board currently uses only 3 of the six bytes of the report. */
buf[0] = cmd; /* Byte 0 = CMD */
buf[1] = *msb; /* Byte 1 = Data MSB */
buf[2] = *lsb; /* Byte 2 = Data LSB */
@@ -229,12 +251,14 @@ static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned cha
HID_REQ_SET_REPORT, HID_DT_REPORT,
0x0200, usb_pcwd->interface_number, buf, sizeof(buf),
USB_COMMAND_TIMEOUT) != sizeof(buf)) {
- dbg("usb_pcwd_send_command: error in usb_control_msg for cmd 0x%x 0x%x 0x%x\n", cmd, *msb, *lsb);
+ dbg("usb_pcwd_send_command: error in usb_control_msg for "
+ "cmd 0x%x 0x%x 0x%x\n", cmd, *msb, *lsb);
}
/* wait till the usb card processed the command,
* with a max. timeout of USB_COMMAND_TIMEOUT */
got_response = 0;
- for (count = 0; (count < USB_COMMAND_TIMEOUT) && (!got_response); count++) {
+ for (count = 0; (count < USB_COMMAND_TIMEOUT) && (!got_response);
+ count++) {
mdelay(1);
if (atomic_read(&usb_pcwd->cmd_received))
got_response = 1;
@@ -256,10 +280,12 @@ static int usb_pcwd_start(struct usb_pcwd_private *usb_pcwd)
int retval;
/* Enable Watchdog */
- retval = usb_pcwd_send_command(usb_pcwd, CMD_ENABLE_WATCHDOG, &msb, &lsb);
+ retval = usb_pcwd_send_command(usb_pcwd, CMD_ENABLE_WATCHDOG,
+ &msb, &lsb);
if ((retval == 0) || (lsb == 0)) {
- printk(KERN_ERR PFX "Card did not acknowledge enable attempt\n");
+ printk(KERN_ERR PFX
+ "Card did not acknowledge enable attempt\n");
return -1;
}
@@ -273,10 +299,12 @@ static int usb_pcwd_stop(struct usb_pcwd_private *usb_pcwd)
int retval;
/* Disable Watchdog */
- retval = usb_pcwd_send_command(usb_pcwd, CMD_DISABLE_WATCHDOG, &msb, &lsb);
+ retval = usb_pcwd_send_command(usb_pcwd, CMD_DISABLE_WATCHDOG,
+ &msb, &lsb);
if ((retval == 0) || (lsb != 0)) {
- printk(KERN_ERR PFX "Card did not acknowledge disable attempt\n");
+ printk(KERN_ERR PFX
+ "Card did not acknowledge disable attempt\n");
return -1;
}
@@ -308,7 +336,8 @@ static int usb_pcwd_set_heartbeat(struct usb_pcwd_private *usb_pcwd, int t)
return 0;
}
-static int usb_pcwd_get_temperature(struct usb_pcwd_private *usb_pcwd, int *temperature)
+static int usb_pcwd_get_temperature(struct usb_pcwd_private *usb_pcwd,
+ int *temperature)
{
unsigned char msb, lsb;
@@ -323,7 +352,8 @@ static int usb_pcwd_get_temperature(struct usb_pcwd_private *usb_pcwd, int *temp
return 0;
}
-static int usb_pcwd_get_timeleft(struct usb_pcwd_private *usb_pcwd, int *time_left)
+static int usb_pcwd_get_timeleft(struct usb_pcwd_private *usb_pcwd,
+ int *time_left)
{
unsigned char msb, lsb;
@@ -341,7 +371,7 @@ static int usb_pcwd_get_timeleft(struct usb_pcwd_private *usb_pcwd, int *time_le
*/
static ssize_t usb_pcwd_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
+ size_t len, loff_t *ppos)
{
/* See if we got the magic character 'V' and reload the timer */
if (len) {
@@ -352,7 +382,8 @@ static ssize_t usb_pcwd_write(struct file *file, const char __user *data,
* five months ago... */
expect_release = 0;
- /* scan to see whether or not we got the magic character */
+ /* scan to see whether or not we got the
+ * magic character */
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data + i))
@@ -431,7 +462,7 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd,
return -EFAULT;
if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat))
- return -EINVAL;
+ return -EINVAL;
usb_pcwd_keepalive(usb_pcwd_device);
/* Fall */
@@ -475,7 +506,8 @@ static int usb_pcwd_release(struct inode *inode, struct file *file)
if (expect_release == 42) {
usb_pcwd_stop(usb_pcwd_device);
} else {
- printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ printk(KERN_CRIT PFX
+ "Unexpected close, not stopping watchdog!\n");
usb_pcwd_keepalive(usb_pcwd_device);
}
expect_release = 0;
@@ -515,7 +547,8 @@ static int usb_pcwd_temperature_release(struct inode *inode, struct file *file)
* Notify system
*/
-static int usb_pcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int usb_pcwd_notify_sys(struct notifier_block *this, unsigned long code,
+ void *unused)
{
if (code == SYS_DOWN || code == SYS_HALT)
usb_pcwd_stop(usb_pcwd_device); /* Turn the WDT off */
@@ -578,7 +611,8 @@ static inline void usb_pcwd_delete(struct usb_pcwd_private *usb_pcwd)
* Called by the usb core when a new device is connected that it thinks
* this driver might be interested in.
*/
-static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_device_id *id)
+static int usb_pcwd_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
struct usb_host_interface *iface_desc;
@@ -602,7 +636,8 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
/* check out that we have a HID device */
if (!(iface_desc->desc.bInterfaceClass == USB_CLASS_HID)) {
- printk(KERN_ERR PFX "The device isn't a Human Interface Device\n");
+ printk(KERN_ERR PFX
+ "The device isn't a Human Interface Device\n");
return -ENODEV;
}
@@ -632,10 +667,12 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
usb_pcwd->udev = udev;
usb_pcwd->interface = interface;
usb_pcwd->interface_number = iface_desc->desc.bInterfaceNumber;
- usb_pcwd->intr_size = (le16_to_cpu(endpoint->wMaxPacketSize) > 8 ? le16_to_cpu(endpoint->wMaxPacketSize) : 8);
+ usb_pcwd->intr_size = (le16_to_cpu(endpoint->wMaxPacketSize) > 8 ?
+ le16_to_cpu(endpoint->wMaxPacketSize) : 8);
/* set up the memory buffer's */
- usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size, GFP_ATOMIC, &usb_pcwd->intr_dma);
+ usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size,
+ GFP_ATOMIC, &usb_pcwd->intr_dma);
if (!usb_pcwd->intr_buffer) {
printk(KERN_ERR PFX "Out of memory\n");
goto error;
@@ -669,7 +706,8 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
usb_pcwd_stop(usb_pcwd);
/* Get the Firmware Version */
- got_fw_rev = usb_pcwd_send_command(usb_pcwd, CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor);
+ got_fw_rev = usb_pcwd_send_command(usb_pcwd, CMD_GET_FIRMWARE_VERSION,
+ &fw_rev_major, &fw_rev_minor);
if (got_fw_rev)
sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
else
@@ -679,9 +717,11 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
fw_ver_str);
/* Get switch settings */
- usb_pcwd_send_command(usb_pcwd, CMD_GET_DIP_SWITCH_SETTINGS, &dummy, &option_switches);
+ usb_pcwd_send_command(usb_pcwd, CMD_GET_DIP_SWITCH_SETTINGS, &dummy,
+ &option_switches);
- printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
+ printk(KERN_INFO PFX "Option switches (0x%02x): "
+ "Temperature Reset Enable=%s, Power On Delay=%s\n",
option_switches,
((option_switches & 0x10) ? "ON" : "OFF"),
((option_switches & 0x08) ? "ON" : "OFF"));
@@ -690,30 +730,35 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
if (heartbeat == 0)
heartbeat = heartbeat_tbl[(option_switches & 0x07)];
- /* Check that the heartbeat value is within it's range ; if not reset to the default */
+ /* Check that the heartbeat value is within it's range ;
+ * if not reset to the default */
if (usb_pcwd_set_heartbeat(usb_pcwd, heartbeat)) {
usb_pcwd_set_heartbeat(usb_pcwd, WATCHDOG_HEARTBEAT);
- printk(KERN_INFO PFX "heartbeat value must be 0<heartbeat<65536, using %d\n",
+ printk(KERN_INFO PFX
+ "heartbeat value must be 0<heartbeat<65536, using %d\n",
WATCHDOG_HEARTBEAT);
}
retval = register_reboot_notifier(&usb_pcwd_notifier);
if (retval != 0) {
- printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
+ printk(KERN_ERR PFX
+ "cannot register reboot notifier (err=%d)\n",
retval);
goto error;
}
retval = misc_register(&usb_pcwd_temperature_miscdev);
if (retval != 0) {
- printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ printk(KERN_ERR PFX
+ "cannot register miscdev on minor=%d (err=%d)\n",
TEMP_MINOR, retval);
goto err_out_unregister_reboot;
}
retval = misc_register(&usb_pcwd_miscdev);
if (retval != 0) {
- printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ printk(KERN_ERR PFX
+ "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, retval);
goto err_out_misc_deregister;
}
@@ -799,7 +844,7 @@ static int __init usb_pcwd_init(void)
return result;
}
- printk(KERN_INFO PFX DRIVER_DESC " v" DRIVER_VERSION " (" DRIVER_DATE ")\n");
+ printk(KERN_INFO PFX DRIVER_DESC " v" DRIVER_VERSION "\n");
return 0;
}
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 6d9f3d4a998..64135195f82 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -54,22 +54,22 @@
/* WDTIM_CTRL bit definitions */
#define COUNT_ENAB 1
-#define RESET_COUNT (1<<1)
-#define DEBUG_EN (1<<2)
+#define RESET_COUNT (1 << 1)
+#define DEBUG_EN (1 << 2)
/* WDTIM_MCTRL bit definitions */
#define MR0_INT 1
#undef RESET_COUNT0
-#define RESET_COUNT0 (1<<2)
-#define STOP_COUNT0 (1<<2)
-#define M_RES1 (1<<3)
-#define M_RES2 (1<<4)
-#define RESFRC1 (1<<5)
-#define RESFRC2 (1<<6)
+#define RESET_COUNT0 (1 << 2)
+#define STOP_COUNT0 (1 << 2)
+#define M_RES1 (1 << 3)
+#define M_RES2 (1 << 4)
+#define RESFRC1 (1 << 5)
+#define RESFRC2 (1 << 6)
/* WDTIM_EMR bit definitions */
#define EXT_MATCH0 1
-#define MATCH_OUTPUT_HIGH (2<<4) /*a MATCH_CTRL setting */
+#define MATCH_OUTPUT_HIGH (2 << 4) /*a MATCH_CTRL setting */
/* WDTIM_RES bit definitions */
#define WDOG_RESET 1 /* read only */
diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c
index 01cc7e39d92..2cff53310f7 100644
--- a/drivers/watchdog/riowd.c
+++ b/drivers/watchdog/riowd.c
@@ -146,7 +146,8 @@ static long riowd_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
return 0;
}
-static ssize_t riowd_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t riowd_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
{
struct riowd *p = riowd_device;
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index e19b4579471..5bd782f2783 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -1,8 +1,8 @@
/*
* Watchdog driver for the SA11x0/PXA2xx
*
- * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
- * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
+ * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -15,7 +15,7 @@
*
* (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
*
- * 27/11/2000 Initial release
+ * 27/11/2000 Initial release
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c
index 3266daaaecf..d1c390c7155 100644
--- a/drivers/watchdog/sbc60xxwdt.c
+++ b/drivers/watchdog/sbc60xxwdt.c
@@ -1,7 +1,7 @@
/*
* 60xx Single Board Computer Watchdog Timer driver for Linux 2.2.x
*
- * Based on acquirewdt.c by Alan Cox.
+ * Based on acquirewdt.c by Alan Cox.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c
index ae74f6bcfa2..b6e6799ec45 100644
--- a/drivers/watchdog/sbc8360.c
+++ b/drivers/watchdog/sbc8360.c
@@ -4,12 +4,12 @@
* (c) Copyright 2005 Webcon, Inc.
*
* Based on ib700wdt.c, which is based on advantechwdt.c which is based
- * on acquirewdt.c which is based on wdt.c.
+ * on acquirewdt.c which is based on wdt.c.
*
* (c) Copyright 2001 Charles Howes <chowes@vsol.net>
*
- * Based on advantechwdt.c which is based on acquirewdt.c which
- * is based on wdt.c.
+ * Based on advantechwdt.c which is based on acquirewdt.c which
+ * is based on wdt.c.
*
* (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
*
@@ -30,9 +30,9 @@
*
* (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
- * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
- * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
- * Added timeout module option to override default
+ * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ * Added timeout module option to override default
*
*/
diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c
index 06553debc7b..e467ddcf796 100644
--- a/drivers/watchdog/sbc_epx_c3.c
+++ b/drivers/watchdog/sbc_epx_c3.c
@@ -35,7 +35,8 @@ static int epx_c3_alive;
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
#define EPXC3_WATCHDOG_CTL_REG 0x1ee /* write 1 to enable, 0 to disable */
#define EPXC3_WATCHDOG_PET_REG 0x1ef /* write anything to pet once enabled */
diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c
index 23da3ccd832..b5e19c1820a 100644
--- a/drivers/watchdog/sc1200wdt.c
+++ b/drivers/watchdog/sc1200wdt.c
@@ -71,7 +71,7 @@
#define UART2_IRQ 0x04 /* Serial1 */
/* 5 -7 are reserved */
-static char banner[] __initdata = KERN_INFO PFX SC1200_MODULE_VER;
+static char banner[] __initdata = PFX SC1200_MODULE_VER;
static int timeout = 1;
static int io = -1;
static int io_len = 2; /* for non plug and play */
@@ -392,7 +392,7 @@ static int __init sc1200wdt_init(void)
{
int ret;
- printk("%s\n", banner);
+ printk(KERN_INFO "%s\n", banner);
#if defined CONFIG_PNP
if (isapnp) {
@@ -477,6 +477,7 @@ module_init(sc1200wdt_init);
module_exit(sc1200wdt_exit);
MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
-MODULE_DESCRIPTION("Driver for National Semiconductor PC87307/PC97307 watchdog component");
+MODULE_DESCRIPTION(
+ "Driver for National Semiconductor PC87307/PC97307 watchdog component");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c
index a2b6c1067ec..52b63f2f0da 100644
--- a/drivers/watchdog/sc520_wdt.c
+++ b/drivers/watchdog/sc520_wdt.c
@@ -1,8 +1,8 @@
/*
* AMD Elan SC520 processor Watchdog Timer driver
*
- * Based on acquirewdt.c by Alan Cox,
- * and sbc60xxwdt.c by Jakob Oestergaard <jakob@unthought.net>
+ * Based on acquirewdt.c by Alan Cox,
+ * and sbc60xxwdt.c by Jakob Oestergaard <jakob@unthought.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -11,7 +11,7 @@
*
* The authors do NOT admit liability nor provide warranty for
* any of this software. This material is provided "AS-IS" in
- * the hope that it may be useful for others.
+ * the hope that it may be useful for others.
*
* (c) Copyright 2001 Scott Jennings <linuxdrivers@oro.net>
* 9/27 - 2001 [Initial release]
@@ -438,6 +438,7 @@ module_init(sc520_wdt_init);
module_exit(sc520_wdt_unload);
MODULE_AUTHOR("Scott and Bill Jennings");
-MODULE_DESCRIPTION("Driver for watchdog timer in AMD \"Elan\" SC520 uProcessor");
+MODULE_DESCRIPTION(
+ "Driver for watchdog timer in AMD \"Elan\" SC520 uProcessor");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index 2e56cad77d1..8a1f0bc3e27 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -2,7 +2,7 @@
* SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x
*
* Based on acquirewdt.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
- * and some other existing drivers
+ * and some other existing drivers
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -11,7 +11,7 @@
*
* The authors do NOT admit liability nor provide warranty for
* any of this software. This material is provided "AS-IS" in
- * the hope that it may be useful for others.
+ * the hope that it may be useful for others.
*
* (C) Copyright 2003-2006 Sven Anders <anders@anduras.de>
*
@@ -22,19 +22,19 @@
*
* Theory of operation:
*
- * A Watchdog Timer (WDT) is a hardware circuit that can
- * reset the computer system in case of a software fault.
- * You probably knew that already.
+ * A Watchdog Timer (WDT) is a hardware circuit that can
+ * reset the computer system in case of a software fault.
+ * You probably knew that already.
*
- * Usually a userspace daemon will notify the kernel WDT driver
- * via the /dev/watchdog special device file that userspace is
- * still alive, at regular intervals. When such a notification
- * occurs, the driver will usually tell the hardware watchdog
- * that everything is in order, and that the watchdog should wait
- * for yet another little while to reset the system.
- * If userspace fails (RAM error, kernel bug, whatever), the
- * notifications cease to occur, and the hardware watchdog will
- * reset the system (causing a reboot) after the timeout occurs.
+ * Usually a userspace daemon will notify the kernel WDT driver
+ * via the /dev/watchdog special device file that userspace is
+ * still alive, at regular intervals. When such a notification
+ * occurs, the driver will usually tell the hardware watchdog
+ * that everything is in order, and that the watchdog should wait
+ * for yet another little while to reset the system.
+ * If userspace fails (RAM error, kernel bug, whatever), the
+ * notifications cease to occur, and the hardware watchdog will
+ * reset the system (causing a reboot) after the timeout occurs.
*
* Create device with:
* mknod /dev/watchdog c 10 130
@@ -485,7 +485,7 @@ static long wb_smsc_wdt_ioctl(struct file *file,
case WDIOC_GETTIMEOUT:
new_timeout = timeout;
if (unit == UNIT_MINUTE)
- new_timeout *= 60;
+ new_timeout *= 60;
return put_user(new_timeout, uarg.i);
default:
return -ENOTTY;
diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c
index 7204f966211..ebcc9cea5e9 100644
--- a/drivers/watchdog/softdog.c
+++ b/drivers/watchdog/softdog.c
@@ -1,7 +1,8 @@
/*
* SoftDog 0.07: A Software Watchdog Device
*
- * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, All Rights Reserved.
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -32,7 +33,7 @@
* Added WDIOC_GETTIMEOUT and WDIOC_SETTIMOUT.
*
* 20020530 Joel Becker <joel.becker@oracle.com>
- * Added Matt Domsch's nowayout module option.
+ * Added Matt Domsch's nowayout module option.
*/
#include <linux/module.h>
diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c
index 3c7aa412b1f..a9c7f352fcb 100644
--- a/drivers/watchdog/w83697hf_wdt.c
+++ b/drivers/watchdog/w83697hf_wdt.c
@@ -462,6 +462,7 @@ module_init(wdt_init);
module_exit(wdt_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marcus Junker <junker@anduras.de>, Samuel Tardieu <sam@rfc1149.net>");
+MODULE_AUTHOR("Marcus Junker <junker@anduras.de>, "
+ "Samuel Tardieu <sam@rfc1149.net>");
MODULE_DESCRIPTION("w83697hf/hg WDT driver");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c
index 6972c0a1e4d..883b5f79673 100644
--- a/drivers/watchdog/w83697ug_wdt.c
+++ b/drivers/watchdog/w83697ug_wdt.c
@@ -2,7 +2,7 @@
* w83697ug/uf WDT driver
*
* (c) Copyright 2008 Flemming Fransen <ff@nrvissing.net>
- * reused original code to supoprt w83697ug/uf.
+ * reused original code to support w83697ug/uf.
*
* Based on w83627hf_wdt.c which is based on advantechwdt.c
* which is based on wdt.c.
diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c
index 2525da5080c..0560182a1d0 100644
--- a/drivers/watchdog/w83977f_wdt.c
+++ b/drivers/watchdog/w83977f_wdt.c
@@ -426,7 +426,7 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return -EFAULT;
if (wdt_set_timeout(new_timeout))
- return -EINVAL;
+ return -EINVAL;
wdt_keepalive();
/* Fall */
diff --git a/drivers/watchdog/wd501p.h b/drivers/watchdog/wd501p.h
index db34853c28a..0e3a497d562 100644
--- a/drivers/watchdog/wd501p.h
+++ b/drivers/watchdog/wd501p.h
@@ -11,9 +11,9 @@
*
* http://www.cymru.net
*
- * This driver is provided under the GNU General Public License, incorporated
- * herein by reference. The driver is provided without warranty or
- * support.
+ * This driver is provided under the GNU General Public License,
+ * incorporated herein by reference. The driver is provided without
+ * warranty or support.
*
* Release 0.04.
*
@@ -39,13 +39,13 @@
/* programmable outputs: */
#define WDT_PROGOUT (io+15) /* wr=enable, rd=disable */
- /* FAN 501 500 */
-#define WDC_SR_WCCR 1 /* Active low */ /* X X X */
-#define WDC_SR_TGOOD 2 /* X X - */
-#define WDC_SR_ISOI0 4 /* X X X */
-#define WDC_SR_ISII1 8 /* X X X */
-#define WDC_SR_FANGOOD 16 /* X - - */
-#define WDC_SR_PSUOVER 32 /* Active low */ /* X X - */
-#define WDC_SR_PSUUNDR 64 /* Active low */ /* X X - */
-#define WDC_SR_IRQ 128 /* Active low */ /* X X X */
+ /* FAN 501 500 */
+#define WDC_SR_WCCR 1 /* Active low */ /* X X X */
+#define WDC_SR_TGOOD 2 /* X X - */
+#define WDC_SR_ISOI0 4 /* X X X */
+#define WDC_SR_ISII1 8 /* X X X */
+#define WDC_SR_FANGOOD 16 /* X - - */
+#define WDC_SR_PSUOVER 32 /* Active low */ /* X X - */
+#define WDC_SR_PSUUNDR 64 /* Active low */ /* X X - */
+#define WDC_SR_IRQ 128 /* Active low */ /* X X X */
diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c
index 60e28d49ff5..90ef70eb47d 100644
--- a/drivers/watchdog/wdt977.c
+++ b/drivers/watchdog/wdt977.c
@@ -401,7 +401,7 @@ static long wdt977_ioctl(struct file *file, unsigned int cmd,
return -EFAULT;
if (wdt977_set_timeout(new_timeout))
- return -EINVAL;
+ return -EINVAL;
wdt977_keepalive();
/* Fall */