[PATCH] libata: implement presence detection via polling IDENTIFY

On some controllers (ICHs in piix mode), there is *NO* reliable way to
determine device presence other than issuing IDENTIFY and see how the
transaction proceeds by watching the TF status register.

libata acted this way before irq-pio and phantom devices caused very
little problem but now that IDENTIFY is performed using IRQ drive PIO,
such phantom devices now result in multiple 30sec timeouts during
boot.

This patch implements ATA_FLAG_DETECT_POLLING.  If a LLD sets this
flag, libata core issues the initial IDENTIFY in polling mode and if
the initial data transfer fails w/ HSM violation, the port is
considered to be empty thus replicating the old libata and IDE
behavior.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

3 files changed, 37 insertions, 7 deletions

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 090abe44382..21f8d61e587 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1272,9 +1272,20 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 
 	tf.protocol = ATA_PROT_PIO;
 
+	/* presence detection using polling IDENTIFY? */
+	if (flags & ATA_READID_DETECT)
+		tf.flags |= ATA_TFLAG_POLLING;
+
 	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
 				     id, sizeof(id[0]) * ATA_ID_WORDS);
 	if (err_mask) {
+		if ((flags & ATA_READID_DETECT) &&
+		    (err_mask & AC_ERR_NODEV_HINT)) {
+			DPRINTK("ata%u.%d: NODEV after polling detection\n",
+				ap->id, dev->devno);
+			return -ENOENT;
+		}
+
 		rc = -EIO;
 		reason = "I/O error";
 		goto err_out;
@@ -4285,8 +4296,12 @@ fsm_start:
 					/* device stops HSM for abort/error */
 					qc->err_mask |= AC_ERR_DEV;
 				else
-					/* HSM violation. Let EH handle this */
-					qc->err_mask |= AC_ERR_HSM;
+					/* HSM violation. Let EH handle this.
+					 * Phantom devices also trigger this
+					 * condition.  Mark hint.
+					 */
+					qc->err_mask |= AC_ERR_HSM |
+							AC_ERR_NODEV_HINT;
 
 				ap->hsm_task_state = HSM_ST_ERR;
 				goto fsm_start;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 755fc68b537..e69f3df2ea3 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1667,12 +1667,23 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
 			   ata_class_enabled(ehc->classes[dev->devno])) {
 			dev->class = ehc->classes[dev->devno];
 
+			if (ap->flags & ATA_FLAG_DETECT_POLLING)
+				readid_flags |= ATA_READID_DETECT;
+
 			rc = ata_dev_read_id(dev, &dev->class, readid_flags,
 					     dev->id);
 			if (rc == 0) {
 				ehc->i.flags |= ATA_EHI_PRINTINFO;
 				rc = ata_dev_configure(dev);
 				ehc->i.flags &= ~ATA_EHI_PRINTINFO;
+			} else if (rc == -ENOENT) {
+				/* IDENTIFY was issued to non-existent
+				 * device.  No need to reset.  Just
+				 * thaw and kill the device.
+				 */
+				ata_eh_thaw_port(ap);
+				dev->class = ATA_DEV_UNKNOWN;
+				rc = 0;
 			}
 
 			if (rc) {
@@ -1680,12 +1691,14 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
 				break;
 			}
 
-			spin_lock_irqsave(ap->lock, flags);
-			ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
-			spin_unlock_irqrestore(ap->lock, flags);
+			if (ata_dev_enabled(dev)) {
+				spin_lock_irqsave(ap->lock, flags);
+				ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
+				spin_unlock_irqrestore(ap->lock, flags);
 
-			/* new device discovered, configure transfer mode */
-			ehc->i.flags |= ATA_EHI_SETMODE;
+				/* new device discovered, configure xfermode */
+				ehc->i.flags |= ATA_EHI_SETMODE;
+			}
 		}
 	}
 
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index bb98390aa01..be2ac39f013 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -42,6 +42,8 @@ struct ata_scsi_args {
 enum {
 	/* flags for ata_dev_read_id() */
 	ATA_READID_POSTRESET	= (1 << 0), /* reading ID after reset */
+	ATA_READID_DETECT	= (1 << 1), /* perform presence detection
+					     * using polling IDENTIFY */
 };
 
 extern struct workqueue_struct *ata_aux_wq;