CRIS: Merge machine dependent boot/compressed and boot/rescue

Merge the machine dependent boot directories for v10 and v32.
This avoids some code duplication and eases the way for further
merging later on.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

1 files changed, 0 insertions, 126 deletions

diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S
deleted file mode 100644
index 0bb4dcc2925..00000000000
--- a/arch/cris/arch-v10/boot/compressed/head.S
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- *  arch/cris/boot/compressed/head.S
- *
- *  Copyright (C) 1999, 2001 Axis Communications AB
- *
- *  Code that sets up the DRAM registers, calls the
- *  decompressor to unpack the piggybacked kernel, and jumps.
- *
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-#define RAM_INIT_MAGIC 0x56902387
-#define COMMAND_LINE_MAGIC 0x87109563
-
-	;; Exported symbols
-
-	.globl	input_data
-
-
-	.text
-
-	nop
-	di
-
-;; We need to initialze DRAM registers before we start using the DRAM
-
-	cmp.d	RAM_INIT_MAGIC, $r8	; Already initialized?
-	beq	dram_init_finished
-	nop
-
-#include "../../lib/dram_init.S"
-
-dram_init_finished:
-
-	;; Initiate the PA and PB ports
-
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
-	move.b   $r0, [R_PORT_PA_DATA]
-
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
-	move.b   $r0, [R_PORT_PA_DIR]
-
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
-	move.b   $r0, [R_PORT_PB_DATA]
-
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
-	move.b   $r0, [R_PORT_PB_DIR]
-
-	;; Setup the stack to a suitably high address.
-	;; We assume 8 MB is the minimum DRAM in an eLinux
-	;; product and put the sp at the top for now.
-
-	move.d	0x40800000, $sp
-
-	;; Figure out where the compressed piggyback image is
-	;; in the flash (since we wont try to copy it to DRAM
-	;; before unpacking). It is at _edata, but in flash.
-	;; Use (_edata - basse) as offset to the current PC.
-
-basse:	move.d	$pc, $r5
-	and.d	0x7fffffff, $r5	; strip any non-cache bit
-	subq	2, $r5		; compensate for the move.d $pc instr
-	move.d	$r5, $r0		; save for later - flash address of 'basse'
-	add.d	_edata, $r5
-	sub.d	basse, $r5	; $r5 = flash address of '_edata'
-
-	;; Copy text+data to DRAM
-
-	move.d	basse, $r1	; destination
-	move.d	_edata, $r2	; end destination
-1:	move.w	[$r0+], $r3
-	move.w	$r3, [$r1+]
-	cmp.d	$r2, $r1
-	bcs	1b
-	nop
-
-	move.d	$r5, [input_data] ; for the decompressor
-
-
-	;; Clear the decompressors BSS (between _edata and _end)
-
-	moveq	0, $r0
-	move.d	_edata, $r1
-	move.d	_end, $r2
-1:	move.w	$r0, [$r1+]
-	cmp.d	$r2, $r1
-	bcs	1b
-	nop
-
-	;;  Save command line magic and address.
-	move.d	_cmd_line_magic, $r12
-	move.d  $r10, [$r12]
-	move.d	_cmd_line_addr, $r12
-	move.d  $r11, [$r12]
-
-	;; Do the decompression and save compressed size in inptr
-
-	jsr	decompress_kernel
-
-	;; Put start address of root partition in $r9 so the kernel can use it
-	;; when mounting from flash
-
-	move.d	[input_data], $r9	; flash address of compressed kernel
-	add.d	[inptr], $r9		; size of compressed kernel
-
-	;; Restore command line magic and address.
-	move.d  _cmd_line_magic, $r10
-	move.d  [$r10], $r10
-	move.d  _cmd_line_addr, $r11
-	move.d  [$r11], $r11
-
-	;; Enter the decompressed kernel
-	move.d	RAM_INIT_MAGIC, $r8	; Tell kernel that DRAM is initialized
-	jump	0x40004000	; kernel is linked to this address
-
-	.data
-
-input_data:
-	.dword	0		; used by the decompressor
-_cmd_line_magic:
-	.dword 0
-_cmd_line_addr:
-	.dword 0
-#include "../../lib/hw_settings.S"