summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf533
diff options
context:
space:
mode:
authorRobin Getz <robin.getz@analog.com>2007-08-27 17:38:40 +0800
committerBryan Wu <bryan.wu@analog.com>2007-08-27 17:38:40 +0800
commit02f13f9d5c1d3104c5c4e7f4ae30c43d595d1d75 (patch)
tree6ae30584b1158307961224c1755e4e7a34f48a41 /arch/blackfin/mach-bf533
parentd2b11a468a49716debd96532552a72b6078f1cf5 (diff)
Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT didn't work that well with DEBUG_KERNEL_START
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Diffstat (limited to 'arch/blackfin/mach-bf533')
-rw-r--r--arch/blackfin/mach-bf533/head.S243
1 files changed, 0 insertions, 243 deletions
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 6e1b5f6da5c..fa6dc0d8593 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -35,9 +35,6 @@
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-#if CONFIG_DEBUG_KERNEL_START
-#include <asm/mach-common/def_LPBlackfin.h>
-#endif
.global __rambase
.global __ramstart
@@ -104,36 +101,6 @@ ENTRY(__start)
P0 = R1;
R0 = R1;
-#if CONFIG_DEBUG_KERNEL_START
-
-/*
- * Set up a temporary Event Vector Table, so if something bad happens before
- * the kernel is fully started, it doesn't vector off into the bootloaders
- * table
- */
- P0.l = lo(EVT2);
- P0.h = hi(EVT2);
- P1.l = lo(EVT15);
- P1.h = hi(EVT15);
- P2.l = debug_kernel_start_trap;
- P2.h = debug_kernel_start_trap;
-
- RTS = P2;
- RTI = P2;
- RTX = P2;
- RTN = P2;
- RTE = P2;
-
-.Lfill_temp_vector_table:
- [P0++] = P2; /* Core Event Vector Table */
- CC = P0 == P1;
- if !CC JUMP .Lfill_temp_vector_table
- P0 = r0;
- P1 = r0;
- P2 = r0;
-
-#endif
-
p0.h = hi(FIO_MASKA_C);
p0.l = lo(FIO_MASKA_C);
r0 = 0xFFFF(Z);
@@ -459,216 +426,6 @@ ENTRY(_start_dma_code)
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-#if CONFIG_DEBUG_KERNEL_START
-debug_kernel_start_trap:
- /* Set up a temp stack in L1 - SDRAM might not be working */
- P0.L = lo(L1_DATA_A_START + 0x100);
- P0.H = hi(L1_DATA_A_START + 0x100);
- SP = P0;
-
- /* Make sure the Clocks are the way I think they should be */
- r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
- r0 = r0 << 9; /* Shift it over, */
- r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
- r0 = r1 | r0;
- r1 = PLL_BYPASS; /* Bypass the PLL? */
- r1 = r1 << 8; /* Shift it over */
- r0 = r1 | r0; /* add them all together */
-
- p0.h = hi(PLL_CTL);
- p0.l = lo(PLL_CTL); /* Load the address */
- cli r2; /* Disable interrupts */
- ssync;
- w[p0] = r0.l; /* Set the value */
- idle; /* Wait for the PLL to stablize */
- sti r2; /* Enable interrupts */
-
-.Lcheck_again1:
- p0.h = hi(PLL_STAT);
- p0.l = lo(PLL_STAT);
- R0 = W[P0](Z);
- CC = BITTST(R0,5);
- if ! CC jump .Lcheck_again1;
-
- /* Configure SCLK & CCLK Dividers */
- r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
- p0.h = hi(PLL_DIV);
- p0.l = lo(PLL_DIV);
- w[p0] = r0.l;
- ssync;
-
- /* Make sure UART is enabled - you can never be sure */
-
-/*
- * Setup for console. Argument comes from the menuconfig
- */
-
-#ifdef CONFIG_BAUD_9600
-#define CONSOLE_BAUD_RATE 9600
-#elif CONFIG_BAUD_19200
-#define CONSOLE_BAUD_RATE 19200
-#elif CONFIG_BAUD_38400
-#define CONSOLE_BAUD_RATE 38400
-#elif CONFIG_BAUD_57600
-#define CONSOLE_BAUD_RATE 57600
-#elif CONFIG_BAUD_115200
-#define CONSOLE_BAUD_RATE 115200
-#endif
-
- p0.h = hi(UART_GCTL);
- p0.l = lo(UART_GCTL);
- r0 = 0x00(Z);
- w[p0] = r0.L; /* To Turn off UART clocks */
- ssync;
-
- p0.h = hi(UART_LCR);
- p0.l = lo(UART_LCR);
- r0 = 0x83(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16));
-
- p0.h = hi(UART_DLL);
- p0.l = lo(UART_DLL);
- r0 = 0xFF(Z);
- r0 = R1 & R0;
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(UART_DLH);
- p0.l = lo(UART_DLH);
- r1 >>= 8 ;
- w[p0] = r1.L;
- ssync;
-
- p0.h = hi(UART_GCTL);
- p0.l = lo(UART_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- p0.h = hi(UART_LCR);
- p0.l = lo(UART_LCR);
- r0 = 0x03(Z);
- w[p0] = r0.L; /* To Turn on UART */
- ssync;
-
- p0.h = hi(UART_GCTL);
- p0.l = lo(UART_GCTL);
- r0 = 0x01(Z);
- w[p0] = r0.L; /* To Turn on UART Clocks */
- ssync;
-
- P0.h = hi(UART_THR);
- P0.l = lo(UART_THR);
- P1.h = hi(UART_LSR);
- P1.l = lo(UART_LSR);
-
- R0.L = 'K';
- call .Lwait_char;
- R0.L='e';
- call .Lwait_char;
- R0.L='r';
- call .Lwait_char;
- R0.L='n'
- call .Lwait_char;
- R0.L='e'
- call .Lwait_char;
- R0.L='l';
- call .Lwait_char;
- R0.L=' ';
- call .Lwait_char;
- R0.L='c';
- call .Lwait_char;
- R0.L='r';
- call .Lwait_char;
- R0.L='a';
- call .Lwait_char;
- R0.L='s';
- call .Lwait_char;
- R0.L='h';
- call .Lwait_char;
- R0.L='\r';
- call .Lwait_char;
- R0.L='\n';
- call .Lwait_char;
-
- R0.L='S';
- call .Lwait_char;
- R0.L='E';
- call .Lwait_char;
- R0.L='Q'
- call .Lwait_char;
- R0.L='S'
- call .Lwait_char;
- R0.L='T';
- call .Lwait_char;
- R0.L='A';
- call .Lwait_char;
- R0.L='T';
- call .Lwait_char;
- R0.L='=';
- call .Lwait_char;
- R2 = SEQSTAT;
- call .Ldump_reg;
-
- R0.L=' ';
- call .Lwait_char;
- R0.L='R';
- call .Lwait_char;
- R0.L='E'
- call .Lwait_char;
- R0.L='T'
- call .Lwait_char;
- R0.L='X';
- call .Lwait_char;
- R0.L='=';
- call .Lwait_char;
- R2 = RETX;
- call .Ldump_reg;
-
- R0.L='\r';
- call .Lwait_char;
- R0.L='\n';
- call .Lwait_char;
-
-.Ldebug_kernel_start_trap_done:
- JUMP .Ldebug_kernel_start_trap_done;
-.Ldump_reg:
- R3 = 32;
- R4 = 0x0F;
- R5 = ':'; /* one past 9 */
-
-.Ldump_reg2:
- R0 = R2;
- R3 += -4;
- R0 >>>= R3;
- R0 = R0 & R4;
- R0 += 0x30;
- CC = R0 <= R5;
- if CC JUMP .Ldump_reg1;
- R0 += 7;
-
-.Ldump_reg1:
- R1.l = W[P1];
- CC = BITTST(R1, 5);
- if !CC JUMP .Ldump_reg1;
- W[P0] = r0;
-
- CC = R3 == 0;
- if !CC JUMP .Ldump_reg2
- RTS;
-
-.Lwait_char:
- R1.l = W[P1];
- CC = BITTST(R1, 5);
- if !CC JUMP .Lwait_char;
- W[P0] = r0;
- RTS;
-
-#endif /* CONFIG_DEBUG_KERNEL_START */
-
.data
/*