diff options
author | Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 2012-01-27 11:14:02 -0500 |
---|---|---|
committer | Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 2012-01-27 11:14:02 -0500 |
commit | 6c02b7b1610f873888af20f291c07730889ff0f9 (patch) | |
tree | 1b33e6642cc81605b8d37c0bda0abff0ba64fa2d /arch/arm/mach-omap2/board-3430sdp.c | |
parent | 7a7546b377bdaa25ac77f33d9433c59f259b9688 (diff) | |
parent | dcd6c92267155e70a94b3927bce681ce74b80d1f (diff) |
Merge commit 'v3.3-rc1' into stable/for-linus-fixes-3.3
* commit 'v3.3-rc1': (9775 commits)
Linux 3.3-rc1
x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
qnx4: don't leak ->BitMap on late failure exits
qnx4: reduce the insane nesting in qnx4_checkroot()
qnx4: di_fname is an array, for crying out loud...
KEYS: Permit key_serial() to be called with a const key pointer
keys: fix user_defined key sparse messages
ima: fix cred sparse warning
uml: fix compile for x86-64
MPILIB: Add a missing ENOMEM check
tpm: fix (ACPI S3) suspend regression
nvme: fix merge error due to change of 'make_request_fn' fn type
xen: using EXPORT_SYMBOL requires including export.h
gpio: tps65910: Use correct offset for gpio initialization
acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
intel_idle: Split up and provide per CPU initialization func
ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
tg3: Fix single-vector MSI-X code
openvswitch: Fix multipart datapath dumps.
ipv6: fix per device IP snmp counters
...
Diffstat (limited to 'arch/arm/mach-omap2/board-3430sdp.c')
-rw-r--r-- | arch/arm/mach-omap2/board-3430sdp.c | 104 |
1 files changed, 4 insertions, 100 deletions
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 77142c13fa1..383717ba63b 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -33,7 +33,7 @@ #include <plat/mcspi.h> #include <plat/board.h> #include <plat/usb.h> -#include <plat/common.h> +#include "common.h" #include <plat/dma.h> #include <plat/gpmc.h> #include <video/omapdss.h> @@ -475,106 +475,8 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; - -static struct omap_device_pad serial1_pads[] __initdata = { - /* - * Note that off output enable is an active low - * signal. So setting this means pin is a - * input enabled in off mode - */ - OMAP_MUX_STATIC("uart1_cts.uart1_cts", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart1_rts.uart1_rts", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart1_rx.uart1_rx", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart1_tx.uart1_tx", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial2_pads[] __initdata = { - OMAP_MUX_STATIC("uart2_cts.uart2_cts", - OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rts.uart2_rts", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rx.uart2_rx", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_tx.uart2_tx", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial3_pads[] __initdata = { - OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx", - OMAP_PIN_INPUT_PULLDOWN | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), -}; - -static struct omap_board_data serial1_data __initdata = { - .id = 0, - .pads = serial1_pads, - .pads_cnt = ARRAY_SIZE(serial1_pads), -}; - -static struct omap_board_data serial2_data __initdata = { - .id = 1, - .pads = serial2_pads, - .pads_cnt = ARRAY_SIZE(serial2_pads), -}; - -static struct omap_board_data serial3_data __initdata = { - .id = 2, - .pads = serial3_pads, - .pads_cnt = ARRAY_SIZE(serial3_pads), -}; - -static inline void board_serial_init(void) -{ - omap_serial_init_port(&serial1_data); - omap_serial_init_port(&serial2_data); - omap_serial_init_port(&serial3_data); -} #else #define board_mux NULL - -static inline void board_serial_init(void) -{ - omap_serial_init(); -} #endif /* @@ -711,7 +613,7 @@ static void __init omap_3430sdp_init(void) else gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; omap_ads7846_init(1, gpio_pendown, 310, NULL); - board_serial_init(); + omap_serial_init(); omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL); usb_musb_init(NULL); board_smc91x_init(); @@ -728,6 +630,8 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap_3430sdp_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END |