diff options
author | Kévin Raymond <kraymond@avencall.com> | 2012-12-13 15:55:40 +0100 |
---|---|---|
committer | Kévin Raymond <kraymond@avencall.com> | 2012-12-13 15:55:40 +0100 |
commit | 88938740bc94e2a17e273857071142fc603194dc (patch) | |
tree | f2f3a5afc1b9679711557c4eaa1c2715267c6fe8 | |
parent | a272b2ec9271209ad799aaa2236fd4ebd234ced4 (diff) |
More README - upgrade added
-rw-r--r-- | README | 23 |
1 files changed, 15 insertions, 8 deletions
@@ -64,7 +64,7 @@ * 3 Usage * 3.1 Boot & reboot - * 3.2 + * 3.2 Upgrade XiVO * 4 Be aware that... @@ -182,15 +182,22 @@ == Usage == - To boot the board, plug the power cable. Depending on the firmware, you - will need to press the SW1 (power) switch (the one at the right) for few - seconds (10s at last). + === Boot & Reboot === - To reboot the board, you need actually to halt it, then press the reboot - switch (SW2, left of SW1). + To boot the board, plug the power cable. You need to press the Power switch + (SW1, right side) few seconds to boot. - To halt the board, starting at firmware rev d026353, you can enter "halt" - on the board and wait few seconds. All LEDs should power off. + There is no reboot actually. You need to halt the board. Either from + GNU/Linux or by pressing the switch SW1 few seconds. + + Please mind that "reboot" command halt the board. You'll need to press the + the switch SW1 to restart the board. + + === Upgrade XiVO === + + You can use the `xivo-upgrade' command, but you actually need to restart + the system in order to reload correctly the drivers. + Don't forget to restart! == Be aware that.. == |