path: root/main.c

/*
 *  XIOHV5.12 power sequence
 *  Copyright (C) 2012  Avencall
 *  Authors:
 *    Jean Marc Ouvrard
 *    Noe Rubinstein
 *    Guillaume Knispel
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <stdbool.h>
#include <string.h>

#include <io430.h>
#include <intrinsics.h>

#include "def.h"
#include "hardware.h"

static void InitPorts(void);

static void GlobalInit(void);

volatile u16 Timer1;
volatile u16 SW1State;
volatile u16 SW2State;

enum state {
  STOP         = 10,
  WAIT_VREF    = 15,
  WAIT_START   = 20,
  WAIT_ATX_OK  = 30,
  WAIT_V1P0    = 40,
  WAIT_V1P2    = 50,
  WAIT_V1P8    = 60,
  WAIT_RSMRST  = 70,
  CK410_VTT_GD = 80,
  CPU_RUN      = 90,
  WAIT_STOP    = 100,
};

static u16 state;

#ifdef CAN_WAIT_TENSION

static void InitADC10(void);
static void start_conversion(void);
static void get_conversion_result(void);

# define TENSION_EXPIRED (Timer1 == 0)
# define TENSION_WAIT(t) (tension_ok[t])

enum tensions {
  VCC3,
  V1P8_PGOOD,
  V1P0,
  V1P2,
  V1P8_DDR,
  V2P5,
  TEMP,
  TENSIONS_NUM
};

static const u16 inch[] = {
  [VCC3]       = INCH_5,
  [V1P8_PGOOD] = INCH_6,
  [V1P0]       = INCH_12,
  [V1P2]       = INCH_13,
  [V1P8_DDR]   = INCH_14,
  [V2P5]       = INCH_15,
  [TEMP]       = INCH_10,
};

static unsigned cidx;
static bool tension_ok[TENSIONS_NUM];

# ifdef MONITOR_TENSIONS

static bool monitoring[TENSIONS_NUM];

#  define init_monitoring() memset(monitoring, 0, sizeof(monitoring))
#  define start_monitoring(t) (monitoring[t] = true)
#  define check_tension(t, min, max) \
     case t: \
       tension_ok[t] = ADC10MEM < min || ADC10MEM > max; \
       if (monitoring[t] && !tension_ok[t]) \
         state = STOP; \
       break;

# else

#  define init_monitoring()
#  define start_monitoring(t)
#  define check_tension(t, min, max) \
     case t: \
       tension_ok[t] = ADC10MEM < min || ADC10MEM > max; \
       break;

# endif

static void InitADC10(void)
{
  // Ports are already initiated with correct values

  // ADC10SHT <- what kind of conversion time do we need?

  ADC10CTL0 = SREF_1 | ADC10SHT_2 | REFON | REF2_5V | ADC10ON | ADC10IE;
  // wait 30ms here

  ADC10AE0 = BIT5 | BIT6;
  ADC10AE1 = BIT4 | BIT5 | BIT6 | BIT7; // A12 A13 A14 A15
}

static void start_conversion(void)
{
  ADC10CTL1 = ADC10CTL1 & ~INCH_15 | inch[cidx];
  ADC10CTL0 |= ENC | ADC10SC;
}


static void get_conversion_result(void)
{
  switch (cidx) {
    /* See the ADC10 notes and InfosPowerSeq.ods for these values */
#ifdef BRIDGE_5_PERCENT
  check_tension(V1P0    , 180, 233)
  check_tension(V1P2    , 209, 288)
  check_tension(V1P8_DDR, 314, 432)
  check_tension(V2P5    , 435, 600)
  check_tension(VCC3    , 575, 792)
#else
  check_tension(V1P0    , 187, 224)
  check_tension(V1P2    , 218, 277)
  check_tension(V1P8_DDR, 327, 415)
  check_tension(V2P5    , 454, 577)
  check_tension(VCC3    , 599, 762)
#endif

  case V1P8_PGOOD:
    tension_ok[V1P8_PGOOD] = ADC10MEM > 368;
    break;
  case TEMP:
    break;
  }

  cidx = (cidx + 1) % ARRAY_SIZE(inch);
}

#else

# define InitADC10()
# define start_conversion()
# define get_conversion_result()
# define init_monitoring()
# define start_monitoring(t)

# define TENSION_EXPIRED (0)
# define TENSION_WAIT(t) (Timer1 == 0)

#endif

int main(void)
{

  WDTCTL = WDTPW + WDTHOLD; // Stop watchdog timer to prevent time out reset

  __disable_interrupt();

  InitPorts();
  GlobalInit();
  InitADC10();

  __enable_interrupt();

  Timer1 = 30; // to allow Vref to settle
  state = WAIT_VREF;
  while (1) {
    switch (state) {
    case WAIT_VREF:
      if (Timer1 == 0) {
        start_conversion();
        state = WAIT_START;
      }
      break;

    case WAIT_START:
      if (SW1State > 30)
        state = WAIT_START + 1;
      break;
    case WAIT_START + 1:
      if (SW1State == 0) {
        SetBit(P4OUT, CMDPWR); // Start Atx Power Supply
        Timer1 = 2000;
        state = WAIT_ATX_OK;
      }
      break;

    case WAIT_ATX_OK:
      if (SW1State || TENSION_EXPIRED)
        state = STOP;
      if ((P4IN & ATX_PWROK) && TENSION_WAIT(V2P5) && TENSION_WAIT(VCC3)) {
        start_monitoring(V2P5);
        start_monitoring(VCC3);
        ClrBit(P1OUT, V1P2_CORE_EN_N);
        Timer1 = 30;
        state = WAIT_V1P2;
      }
      break;

    case WAIT_V1P2:
      if (SW1State || TENSION_EXPIRED)
        state = STOP;
      if (TENSION_WAIT(V1P2)) {
        start_monitoring(V1P2);
        Timer1 = 30;
        SetBit(P4OUT, V1P8_CMD);
        state = WAIT_RSMRST;
      }
      break;

    case WAIT_RSMRST:
      if (SW1State)
        state = STOP;
      if (Timer1 < 20) {
        SetBit(P2DIR, IMCH_RSMRST_N);
        ClrBit(P2OUT, IMCH_RSMRST_N);
        state = WAIT_V1P8;
      }
      break;

    case WAIT_V1P8:
      if (SW1State || TENSION_EXPIRED)
        state = STOP;
      if (TENSION_WAIT(V1P8_DDR) && TENSION_WAIT(V1P8_PGOOD)) {
        start_monitoring(V1P8_DDR);
        start_monitoring(V1P8_PGOOD);
        ClrBit(P2OUT, CPU_VCCP_EN_N);
        Timer1 = 30;
        state = WAIT_V1P0;
      }
      break;

    case WAIT_V1P0:
      if (SW1State || TENSION_EXPIRED)
        state = STOP;
      if (TENSION_WAIT(V1P0)) {
        start_monitoring(V1P0);
        SetBit(P3OUT, VRMPWRGD);
        ClrBit(P2OUT, GREEN_LED_N);
        Timer1 = 3;
        state = CK410_VTT_GD;
      }
      break;

    case CK410_VTT_GD:
      if (Timer1 == 0) {
        SetBit(P2DIR, CK410_PWR_GD_N);
        ClrBit(P2OUT, CK410_PWR_GD_N);
        Timer1 = 300;
        state = CPU_RUN;
      }
      break;

    case CPU_RUN:
      if (SW1State)
        state = STOP;
      if (Timer1 == 0) {
        // Start Tolapai: emulate the power button from its point of view
        // we don't really know where is the best place to do that so
        // we will try it here at first.
        SetBit(P2DIR, IMCH_PWRBTN_N);
        Timer1 = 200;
        state = CPU_RUN + 1;
      }
      break;
    case CPU_RUN + 1:
      if (SW1State)
        state = STOP;
      if (Timer1 == 0) {
        ClrBit(P2DIR, IMCH_PWRBTN_N);
        state = WAIT_STOP;
      }
      break;

    case WAIT_STOP:
      if (SW1State >= 6000) // Sw1 button pressed for more than 6 secondes
        state = STOP;
      break;

    case STOP:
      InitPorts();
      Timer1 = 10000; // Disable any other Power up for 10s.
      // We are very careful at first but we know no reason why this should
      // not work with an extremely lower timer. Under some conditions ATX
      // imposes debouncing up to at least 100 ms. I guess a good compromise
      // would be somewhere between 0.5 to 1s.
      ClrBit(P2OUT, RED_LED_N); // To show no restart is possible for now
      state = STOP + 1;
      break;
    case STOP + 1:
      InitPorts();
      if (Timer1 == 0) {
        SetBit(P2OUT, RED_LED_N); // To show restart is possible now
        state = WAIT_START;
      }
      break;
    }
  }
}

#pragma vector = TIMERA1_VECTOR
__interrupt void Timer_A(void)
{
  if (!(P1IN & START_SW1_N))
    SW1State++;
  else
    SW1State = 0;

  if (!(P1IN & RST_SW2_N))
    SW2State++;
  else
    SW2State = 0;

  if (Timer1)
    Timer1--;
}

static void InitPorts(void)
{
  /* DIR: direction: 0 input 1 output
   * SEL: function: 0 gpio
   * REN: resistor enabled
   * OUT: output when REN=0 and DIR=1
   *      0 pull-down 1 pull-up if REN=1
   * IES: Interrupt Edge Select
   * IE:  Interrupt Enable
   */

  P1DIR = P1DIR_INIT;
  P1SEL = P1SEL_INIT;
  P1REN = P1REN_INIT;
  P1OUT = P1OUT_INIT;
  P1IES = P1IES_INIT;
  P1IE = P1IE_INIT;

  P2OUT = P2OUT_INIT;
  P2SEL = P2SEL_INIT;
  P2REN = P2REN_INIT;
  P2DIR = P2DIR_INIT;
  P2IES = P2IES_INIT;
  P2IE = P2IE_INIT;

  P3OUT = P3OUT_INIT;
  P3SEL = P3SEL_INIT;
  P3DIR = P3DIR_INIT;

  P4OUT = P4OUT_INIT;
  P4SEL = P4SEL_INIT;
  P4DIR = P4DIR_INIT;
  P4REN = P4REN_INIT;

}

#pragma vector=ADC10_VECTOR
__interrupt void ADC10_ISR(void)
{
  get_conversion_result();
  start_conversion();
}

static void GlobalInit(void)
{
  DCOCTL = CALDCO_12MHZ;
  BCSCTL1 = CALBC1_12MHZ;
  BCSCTL2 |= DIVS_3; // DIVS_3 => 1/8; SMCLK = 12/8 = 1.5Mhz

  // Set timer A so that Timer_A is called every 1.00266 ms (nominal)
  TACTL = TASSEL_2 + ID_3 + TACLR + TAIE + MC_1; // SMCLK + divise 8 + reset +
                                                 // enable intterupt + UP

  // 188/187500.0 = 0.001002666666666666
  TACCR0 = 188;
}

// vim: et:sw=2:sts=2