diff options
| author | arch import user (historical) <svn@openbios.org> | 2005-07-06 17:17:25 +0000 |
|---|---|---|
| committer | arch import user (historical) <svn@openbios.org> | 2005-07-06 17:17:25 +0000 |
| commit | 6ca7636c8f52560e732cdd5b1c7829cda5aa2bde (patch) | |
| tree | cc45ae7c4dea6e2c5338f52b4314106bf07023be /src | |
| parent | b2ed53dd5669c2c3839633bd2b3b4af709a5b149 (diff) | |
Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-51
Creator: Yinghai Lu <yhlu@tyan.com>
cache_as_ram for AMD and some intel
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1967 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
82 files changed, 5860 insertions, 384 deletions
diff --git a/src/arch/i386/include/arch/cpu.h b/src/arch/i386/include/arch/cpu.h index 0c5b0604a..4cdeded8b 100644 --- a/src/arch/i386/include/arch/cpu.h +++ b/src/arch/i386/include/arch/cpu.h @@ -104,7 +104,7 @@ static inline unsigned int cpuid_edx(unsigned int op) #define X86_VENDOR_SIS 10 #define X86_VENDOR_UNKNOWN 0xff -#ifndef __ROMCC__ +#if !defined( __ROMCC__ ) && defined( __GNUC__) #include <device/device.h> diff --git a/src/arch/i386/include/arch/hlt.h b/src/arch/i386/include/arch/hlt.h index 7d3a56373..23ff1aa91 100644 --- a/src/arch/i386/include/arch/hlt.h +++ b/src/arch/i386/include/arch/hlt.h @@ -1,19 +1,15 @@ #ifndef ARCH_HLT_H #define ARCH_HLT_H -#ifdef __ROMCC__ +#if defined( __ROMCC__) && !defined(__GNUC__) static void hlt(void) { __builtin_hlt(); } - -#endif - -#if defined(__GNUC__) && !defined(__ROMCC__) +#else static inline void hlt(void) { asm("hlt"); - return; } #endif diff --git a/src/arch/i386/include/arch/io.h b/src/arch/i386/include/arch/io.h index 4bd2f4a4c..07d091328 100644 --- a/src/arch/i386/include/arch/io.h +++ b/src/arch/i386/include/arch/io.h @@ -9,8 +9,7 @@ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" * versions of the single-IO instructions (inb_p/inw_p/..). */ - -#ifdef __ROMCC__ +#if defined( __ROMCC__ ) && !defined (__GNUC__) static inline void outb(uint8_t value, uint16_t port) { __builtin_outb(value, port); @@ -42,7 +41,6 @@ static inline uint32_t inl(uint16_t port) { return __builtin_inl(port); } - #else static inline void outb(uint8_t value, uint16_t port) @@ -81,7 +79,7 @@ static inline uint32_t inl(uint16_t port) return value; } -#endif /* __ROMCC__ */ +#endif /* __ROMCC__ && !__GNUC__*/ static inline void outsb(uint16_t port, const void *addr, unsigned long count) { diff --git a/src/arch/i386/include/arch/romcc_io.h b/src/arch/i386/include/arch/romcc_io.h index 80037bd7a..1d3e603ed 100644 --- a/src/arch/i386/include/arch/romcc_io.h +++ b/src/arch/i386/include/arch/romcc_io.h @@ -33,8 +33,7 @@ static inline void write32(unsigned long addr, uint32_t value) { *((volatile uint32_t *)(addr)) = value; } - - +#if 0 typedef __builtin_div_t div_t; typedef __builtin_ldiv_t ldiv_t; typedef __builtin_udiv_t udiv_t; @@ -72,6 +71,32 @@ inline int log2(int value) */ return __builtin_bsr(value); } +#endif + +static inline int log2(int value) +{ + unsigned int r = 0; + __asm__ volatile ( + "bsrl %1, %0\n\t" + "jnz 1f\n\t" + "movl $-1, %0\n\t" + "1:\n\t" + : "=r" (r) : "r" (value)); + return r; + +} +static inline int log2f(int value) +{ + unsigned int r = 0; + __asm__ volatile ( + "bsfl %1, %0\n\t" + "jnz 1f\n\t" + "movl $-1, %0\n\t" + "1:\n\t" + : "=r" (r) : "r" (value)); + return r; + +} #define PCI_ADDR(BUS, DEV, FN, WHERE) ( \ (((BUS) & 0xFF) << 16) | \ diff --git a/src/arch/i386/init/crt0.S.lb b/src/arch/i386/init/crt0.S.lb index f0326fa8f..67ef91059 100644 --- a/src/arch/i386/init/crt0.S.lb +++ b/src/arch/i386/init/crt0.S.lb @@ -37,6 +37,7 @@ #include "crt0_includes.h" +#if USE_DCACHE_RAM == 0 #ifndef CONSOLE_DEBUG_TX_STRING /* uses: esp, ebx, ax, dx */ # define __CRT_CONSOLE_TX_STRING(string) \ @@ -219,3 +220,5 @@ str_pre_main: .string "Jumping to LinuxBIOS.\r\n" .previous #endif /* ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG */ + +#endif /* USE_DCACHE_RAM */ diff --git a/src/arch/i386/init/ldscript.lb b/src/arch/i386/init/ldscript.lb index ba8078b00..7a169e1a5 100644 --- a/src/arch/i386/init/ldscript.lb +++ b/src/arch/i386/init/ldscript.lb @@ -46,6 +46,7 @@ SECTIONS _rom = .; *(.rom.text); *(.rom.data); + *(.rom.data.*); . = ALIGN(16); _erom = .; } diff --git a/src/arch/i386/lib/Config.lb b/src/arch/i386/lib/Config.lb index 7de0250eb..023c0312f 100644 --- a/src/arch/i386/lib/Config.lb +++ b/src/arch/i386/lib/Config.lb @@ -1,6 +1,13 @@ +uses CONFIG_USE_INIT + object c_start.S object cpu.c object pci_ops_conf1.c object pci_ops_conf2.c object pci_ops_auto.c object exception.c + +if CONFIG_USE_INIT + initobject printk_init.o +end + diff --git a/src/arch/i386/lib/c_start.S b/src/arch/i386/lib/c_start.S index ccd0127da..3de556f44 100644 --- a/src/arch/i386/lib/c_start.S +++ b/src/arch/i386/lib/c_start.S @@ -15,9 +15,10 @@ _start: movl %eax, %fs movl %eax, %gs - intel_chip_post_macro(0x13) /* post 12 */ + intel_chip_post_macro(0x13) /* post 13 */ /** clear stack */ + cld leal _stack, %edi movl $_estack, %ecx subl %edi, %ecx @@ -80,7 +81,7 @@ _start: call hardwaremain /*NOTREACHED*/ .Lhlt: - intel_chip_post_macro(0xee) /* post fe */ + intel_chip_post_macro(0xee) /* post ee */ hlt jmp .Lhlt diff --git a/src/arch/i386/lib/console.c b/src/arch/i386/lib/console.c index f667795f0..b233f7559 100644 --- a/src/arch/i386/lib/console.c +++ b/src/arch/i386/lib/console.c @@ -1,5 +1,6 @@ #include <console/loglevel.h> +#if CONFIG_USE_INIT == 0 static void __console_tx_byte(unsigned char byte) { uart_tx_byte(byte); @@ -120,7 +121,7 @@ static void print_spew_hex32(unsigned int value) { __console_tx_hex32(BIOS_SPEW, static void print_spew(const char *str) { __console_tx_string(BIOS_SPEW, str); } /* Non inline versions.... */ - +#if 0 static void print_alert_char_(unsigned char value) NOINLINE { print_alert_char(value); } static void print_alert_hex8_(unsigned char value) NOINLINE { print_alert_hex8(value); } static void print_alert_hex16_(unsigned short value) NOINLINE { print_alert_hex16(value); } @@ -168,6 +169,111 @@ static void print_spew_hex8_(unsigned char value) NOINLINE { print_spew_hex8(v static void print_spew_hex16_(unsigned short value) NOINLINE { print_spew_hex16(value); } static void print_spew_hex32_(unsigned int value) NOINLINE { print_spew_hex32(value); } static void print_spew_(const char *str) NOINLINE { print_spew(str); } +#endif + +#else + +extern int do_printk(int msg_level, const char *fmt, ...); + +#define printk_emerg(fmt, arg...) do_printk(BIOS_EMERG ,fmt, ##arg) +#define printk_alert(fmt, arg...) do_printk(BIOS_ALERT ,fmt, ##arg) +#define printk_crit(fmt, arg...) do_printk(BIOS_CRIT ,fmt, ##arg) +#define printk_err(fmt, arg...) do_printk(BIOS_ERR ,fmt, ##arg) +#define printk_warning(fmt, arg...) do_printk(BIOS_WARNING ,fmt, ##arg) +#define printk_notice(fmt, arg...) do_printk(BIOS_NOTICE ,fmt, ##arg) +#define printk_info(fmt, arg...) do_printk(BIOS_INFO ,fmt, ##arg) +#define printk_debug(fmt, arg...) do_printk(BIOS_DEBUG ,fmt, ##arg) +#define printk_spew(fmt, arg...) do_printk(BIOS_SPEW ,fmt, ##arg) + +#if MAXIMUM_CONSOLE_LOGLEVEL <= BIOS_EMERG +#undef printk_emerg +#define printk_emerg(fmt, arg...) do {} while(0) +#endif +#if MAXIMUM_CONSOLE_LOGLEVEL <= BIOS_ALERT +#undef printk_alert +#define printk_alart(fmt, arg...) do {} while(0) +#endif +#if MAXIMUM_CONSOLE_LOGLEVEL <= BIOS_CRIT +#undef printk_crit +#define printk_crit(fmt, arg...) do {} while(0) +#endif +#if MAXIMUM_CONSOLE_LOGLEVEL <= BIOS_ERR +#undef printk_err +#define printk_err(fmt, arg...) do {} while(0) +#endif +#if MAXIMUM_CONSOLE_LOGLEVEL <= BIOS_WARNING +#undef printk_warning +#define printk_warning(fmt, arg...) do {} while(0) +#endif +#if MAXIMUM_CONSOLE_LOGLEVEL <= BIOS_NOTICE +#undef printk_notice +#define printk_notice(fmt, arg...) do {} while(0) +#endif +#if MAXIMUM_CONSOLE_LOGLEVEL <= BIOS_INFO +#undef printk_info +#define printk_info(fmt, arg...) do {} while(0) +#endif +#if MAXIMUM_CONSOLE_LOGLEVEL <= BIOS_DEBUG +#undef printk_debug +#define printk_debug(fmt, arg...) do {} while(0) +#endif +#if MAXIMUM_CONSOLE_LOGLEVEL <= BIOS_SPEW +#undef printk_spew +#define printk_spew(fmt, arg...) do {} while(0) +#endif + +#define print_emerg(STR) printk_emerg ("%s", (STR)) +#define print_alert(STR) printk_alert ("%s", (STR)) +#define print_crit(STR) printk_crit ("%s", (STR)) +#define print_err(STR) printk_err ("%s", (STR)) +#define print_warning(STR) printk_warning("%s", (STR)) +#define print_notice(STR) printk_notice ("%s", (STR)) +#define print_info(STR) printk_info ("%s", (STR)) +#define print_debug(STR) printk_debug ("%s", (STR)) +#define print_spew(STR) printk_spew ("%s", (STR)) + +#define print_emerg_char(CH) printk_emerg ("%c", (CH)) +#define print_alert_char(CH) printk_alert ("%c", (CH)) +#define print_crit_char(CH) printk_crit ("%c", (CH)) +#define print_err_char(CH) printk_err ("%c", (CH)) +#define print_warning_char(CH) printk_warning("%c", (CH)) +#define print_notice_char(CH) printk_notice ("%c", (CH)) +#define print_info_char(CH) printk_info ("%c", (CH)) +#define print_debug_char(CH) printk_debug ("%c", (CH)) +#define print_spew_char(CH) printk_spew ("%c", (CH)) + +#define print_emerg_hex8(HEX) printk_emerg ("%02x", (HEX)) +#define print_alert_hex8(HEX) printk_alert ("%02x", (HEX)) +#define print_crit_hex8(HEX) printk_crit ("%02x", (HEX)) +#define print_err_hex8(HEX) printk_err ("%02x", (HEX)) +#define print_warning_hex8(HEX) printk_warning("%02x", (HEX)) +#define print_notice_hex8(HEX) printk_notice ("%02x", (HEX)) +#define print_info_hex8(HEX) printk_info ("%02x", (HEX)) +#define print_debug_hex8(HEX) printk_debug ("%02x", (HEX)) +#define print_spew_hex8(HEX) printk_spew ("%02x", (HEX)) + +#define print_emerg_hex16(HEX) printk_emerg ("%04x", (HEX)) +#define print_alert_hex16(HEX) printk_alert ("%04x", (HEX)) +#define print_crit_hex16(HEX) printk_crit ("%04x", (HEX)) +#define print_err_hex16(HEX) printk_err ("%04x", (HEX)) +#define print_warning_hex16(HEX) printk_warning("%04x", (HEX)) +#define print_notice_hex16(HEX) printk_notice ("%04x", (HEX)) +#define print_info_hex16(HEX) printk_info ("%04x", (HEX)) +#define print_debug_hex16(HEX) printk_debug ("%04x", (HEX)) +#define print_spew_hex16(HEX) printk_spew ("%04x", (HEX)) + +#define print_emerg_hex32(HEX) printk_emerg ("%08x", (HEX)) +#define print_alert_hex32(HEX) printk_alert ("%08x", (HEX)) +#define print_crit_hex32(HEX) printk_crit ("%08x", (HEX)) +#define print_err_hex32(HEX) printk_err ("%08x", (HEX)) +#define print_warning_hex32(HEX) printk_warning("%08x", (HEX)) +#define print_notice_hex32(HEX) printk_notice ("%08x", (HEX)) +#define print_info_hex32(HEX) printk_info ("%08x", (HEX)) +#define print_debug_hex32(HEX) printk_debug ("%08x", (HEX)) +#define print_spew_hex32(HEX) printk_spew ("%08x", (HEX)) + + +#endif /* CONFIG_USE_INIT == 0 */ #ifndef LINUXBIOS_EXTRA_VERSION #define LINUXBIOS_EXTRA_VERSION "" diff --git a/src/arch/i386/lib/printk_init.c b/src/arch/i386/lib/printk_init.c new file mode 100644 index 000000000..7c03664a4 --- /dev/null +++ b/src/arch/i386/lib/printk_init.c @@ -0,0 +1,46 @@ +/* + * blantantly copied from linux/kernel/printk.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * by yhlu moved from arch/ppc/lib/printk_init.c, removed the global variable console_loglevel + */ +#include <stdarg.h> +#include <console/loglevel.h> + +/* printk's without a loglevel use this.. */ +#define DEFAULT_MESSAGE_LOGLEVEL 4 /* BIOS_WARNING */ + +/* Keep together for sysctl support */ +/* Using an global varible can cause problem when we reset the stack from cache as ram to ram*/ +#if 0 +int console_loglevel = DEFAULT_CONSOLE_LOGLEVEL; +#else +#define console_loglevel ASM_CONSOLE_LOGLEVEL +#endif + +extern int vtxprintf(void (*)(unsigned char), const char *, va_list); +extern void uart8250_tx_byte(unsigned, unsigned char); + +void console_tx_byte(unsigned char byte) +{ + if (byte == '\n') + uart8250_tx_byte(TTYS0_BASE, '\r'); + uart8250_tx_byte(TTYS0_BASE, byte); +} + +int do_printk(int msg_level, const char *fmt, ...) +{ + va_list args; + int i; + + if (msg_level >= console_loglevel) { + return 0; + } + + va_start(args, fmt); + i = vtxprintf(console_tx_byte, fmt, args); + va_end(args); + + return i; +} diff --git a/src/config/Config.lb b/src/config/Config.lb index 70fc96de4..096044ae5 100644 --- a/src/config/Config.lb +++ b/src/config/Config.lb @@ -63,12 +63,29 @@ makerule linuxbios_ram.rom action "cp $(LINUXBIOS_RAM-1) linuxbios_ram.rom" end +if CONFIG_USE_INIT +makerule init.o + depends "$(INIT-OBJECTS)" + action "$(LD) -melf_i386 -r -o init.pre.o $(INIT-OBJECTS)" + action "$(OBJCOPY) --rename-section .text=.init.text --rename-section .data=.init.data --rename-section .rodata=.init.rodata --rename-section .rodata.str1.1=.init.rodata.str1.1 init.pre.o init.o" +end + +makerule linuxbios + depends "crt0.o init.o linuxbios_ram.rom ldscript.ld" + action "$(CC) -nostdlib -nostartfiles -static -o $@ -T ldscript.ld crt0.o init.o" + action "$(CROSS_COMPILE)nm -n linuxbios | sort > linuxbios.map" +end + +else + makerule linuxbios depends "crt0.o $(INIT-OBJECTS) linuxbios_ram.rom ldscript.ld" action "$(CC) -nostdlib -nostartfiles -static -o $@ -T ldscript.ld crt0.o $(INIT-OBJECTS)" action "$(CROSS_COMPILE)nm -n linuxbios | sort > linuxbios.map" end +end + makerule linuxbios.a depends "$(OBJECTS)" action "rm -f linuxbios.a" diff --git a/src/config/Options.lb b/src/config/Options.lb index 370eba21c..92104a045 100644 --- a/src/config/Options.lb +++ b/src/config/Options.lb @@ -164,7 +164,7 @@ define CONFIG_CHIP_CONFIGURE end define CONFIG_USE_INIT default 0 - export used + export always comment "Use stage 1 initialization code" end @@ -270,7 +270,7 @@ define _RAMSTART end define USE_DCACHE_RAM default 0 - export used + export always comment "Use data cache as temporary RAM if possible" end define DCACHE_RAM_BASE diff --git a/src/cpu/amd/car/cache_as_ram.inc b/src/cpu/amd/car/cache_as_ram.inc new file mode 100644 index 000000000..dfa2b03ac --- /dev/null +++ b/src/cpu/amd/car/cache_as_ram.inc @@ -0,0 +1,220 @@ +/* by yhlu 6.2005 */ +/* We will use 4K bytes only */ +#define CacheSize DCACHE_RAM_SIZE +#define CacheBase (0xd0000 - CacheSize) + +#include <cpu/x86/mtrr.h> +#include <cpu/amd/mtrr.h> + + /* Save the BIST result */ + movl %eax, %ebp + +CacheAsRam: + /* hope we can skip the double set for normal part */ +#if USE_FALLBACK_IMAGE == 1 + + /* Set MtrrFixDramModEn for clear fixed mtrr */ + xorl %eax, %eax # clear %eax and %edx + xorl %edx, %edx + +enable_fixed_mtrr_dram_modify: + movl $SYSCFG_MSR, %ecx + rdmsr + andl $(~(SYSCFG_MSR_MtrrFixDramEn|SYSCFG_MSR_MtrrVarDramEn)), %eax + orl $SYSCFG_MSR_MtrrFixDramModEn, %eax + wrmsr + + /* Set the default memory type and enable fixed and variable MTRRs */ + movl $MTRRdefType_MSR, %ecx + xorl %edx, %edx + /* Enable Variable and Fixed MTRRs */ + movl $0x00000c00, %eax + wrmsr + + /*Clear all MTRRs */ + + xorl %edx, %edx + movl $fixed_mtrr_msr, %esi +clear_fixed_var_mtrr: + lodsl (%esi), %eax + testl %eax, %eax + jz clear_fixed_var_mtrr_out + + movl %eax, %ecx + xorl %eax, %eax + wrmsr + + jmp clear_fixed_var_mtrr +clear_fixed_var_mtrr_out: + + /* Enable the MTRRs and IORRs in SYSCFG */ + movl $SYSCFG_MSR, %ecx + rdmsr + orl $(SYSCFG_MSR_MtrrVarDramEn | SYSCFG_MSR_MtrrFixDramEn), %eax + wrmsr + +#if 1 +#if CacheSize == 0x10000 + /* enable caching for 64K using fixed mtrr */ + movl $0x268, %ecx /* fix4k_c0000*/ + movl $0x06060606, %eax /* WB IO type */ + movl %eax, %edx + wrmsr + movl $0x269, %ecx + wrmsr +#endif + +#if CacheSize == 0x8000 + /* enable caching for 32K using fixed mtrr */ + movl $0x269, %ecx /* fix4k_c8000*/ + movl $0x06060606, %eax /* WB IO type */ + movl %eax, %edx + wrmsr +#endif + + /* enable caching for 16K/8K/4K using fixed mtrr */ + movl $0x269, %ecx /* fix4k_cc000*/ +#if CacheSize == 0x4000 + movl $0x06060606, %edx /* WB IO type */ +#endif +#if CacheSize == 0x2000 + movl $0x06060000, %edx /* WB IO type */ +#endif +#if CacheSize == 0x1000 + movl $0x06000000, %edx /* WB IO type */ +#endif + xorl %eax, %eax + wrmsr + +#else + /* enable caching for 64K using variable mtrr */ + movl $0x200, %ecx + xorl %edx, %edx + movl $(CacheBase | MTRR_TYPE_WRBACK), %eax + wrmsr + + movl $0x201, %ecx + movl $0x0000000f, %edx /* AMD 40 bit 0xff*/ + movl $((~((CacheBase + CacheSize) - 1)) | 0x800), %eax + wrmsr + + /* make it to be IO by clearing RD Dram and WR Dram */ + movl $IORR0_BASE, %ecx + xorl %edx, %edx + movl $CacheBase, %eax /* bit 3, and bit 4 = 0 mean clear RD ram and WR ram */ + wrmsr + + movl $IORR0_MASK, %ecx + movl $0x000000ff, %edx + movl $(~((CacheBase + CacheSize) - 1) | 0x800), %eax + wrmsr +#endif + + /* enable memory access for 0 - 1MB using top_mem */ + movl $TOP_MEM, %ecx + xorl %edx, %edx + movl $(((CONFIG_LB_MEM_TOPK << 10) + TOP_MEM_MASK) & ~TOP_MEM_MASK) , %eax + wrmsr +#else + /* disable cache */ + movl %cr0, %eax + orl $(0x1<<30),%eax + movl %eax, %cr0 + +#endif /* USE_FALLBACK_IMAGE == 1*/ + +#if defined(XIP_ROM_SIZE) && defined(XIP_ROM_BASE) + /* enable write base caching so we can do execute in place + * on the flash rom. + */ + movl $0x202, %ecx + xorl %edx, %edx + movl $(XIP_ROM_BASE | MTRR_TYPE_WRBACK), %eax + wrmsr + + movl $0x203, %ecx + movl $0x0000000f, %edx + movl $(~(XIP_ROM_SIZE - 1) | 0x800), %eax + wrmsr +#endif /* XIP_ROM_SIZE && XIP_ROM_BASE */ + + /* enable cache */ + movl %cr0, %eax + andl $0x9fffffff,%eax + movl %eax, %cr0 + +#if USE_FALLBACK_IMAGE == 1 + + + /* Read the range with lodsl*/ + movl $(CacheBase+CacheSize-4), %esi + std + movl $(CacheSize>>2), %ecx + rep lodsl + /* Clear the range */ + movl $(CacheBase+CacheSize-4), %edi + movl $(CacheSize>>2), %ecx + xorl %eax, %eax + rep stosl + +#if 0 + /* check the cache as ram */ + movl $CacheBase, %esi + movl $(CacheSize>>2), %ecx +.xin1: + movl %esi, %eax + movl %eax, (%esi) + movl $0x1000, %edx + movb %ah, %al +.testx1: + outb %al, $0x80 + decl %edx + jnz .testx1 + + movl (%esi), %eax + cmpb 0xff, %al + je .xin2 /* dont show */ + movl $0x1000, %edx +.testx2: + outb %al, $0x80 + decl %edx + jnz .testx2 + +.xin2: decl %ecx + je .xout1 + add $4, %esi + jmp .xin1 +.xout1: + +#endif +#endif /*USE_FALLBACK_IMAGE == 1*/ + + + movl $(CacheBase+CacheSize-4), %eax + movl %eax, %esp + + + /* Restore the BIST result */ + movl %ebp, %eax + /* We need to set ebp ? No need */ + movl %esp, %ebp + pushl %eax /* bist */ + call amd64_main + /* We will not go back */ + +fixed_mtrr_msr: + .long 0x250, 0x258, 0x259 + .long 0x268, 0x269, 0x26A + .long 0x26B, 0x26C, 0x26D + .long 0x26E, 0x26F +var_mtrr_msr: + .long 0x200, 0x201, 0x202, 0x203 + .long 0x204, 0x205, 0x206, 0x207 + .long 0x208, 0x209, 0x20A, 0x20B + .long 0x20C, 0x20D, 0x20E, 0x20F +var_iorr_msr: + .long 0xC0010016, 0xC0010017, 0xC0010018, 0xC0010019 +mem_top: + .long 0xC001001A, 0xC001001D + .long 0x000 /* NULL, end of table */ +.CacheAsRam_out: diff --git a/src/cpu/amd/car/cache_as_ram.lds b/src/cpu/amd/car/cache_as_ram.lds new file mode 100644 index 000000000..5cca0bb28 --- /dev/null +++ b/src/cpu/amd/car/cache_as_ram.lds @@ -0,0 +1,17 @@ +/* + * init sections to place code running with cache as ram. + * + * 2004 by Stefan Reinauer <stepan@openbios.org> + */ + +SECTIONS { + .init . : { + _init = .; + *(.init.text); + *(.init.rodata); + *(.init.rodata.*); + . = ALIGN(16); + _einit = .; + } + +} diff --git a/src/cpu/amd/car/cache_as_ram_post.c b/src/cpu/amd/car/cache_as_ram_post.c new file mode 100644 index 000000000..66ca9fdf9 --- /dev/null +++ b/src/cpu/amd/car/cache_as_ram_post.c @@ -0,0 +1,94 @@ +/* by yhlu 6.2005 */ + __asm__ volatile ( + /* + FIXME : backup stack in CACHE_AS_RAM into mmx and sse and after we get STACK up, we restore that. + It is only needed if we want to go back + */ + + /* We don't need cache as ram for now on */ + /* disable cache */ + "movl %cr0, %eax\n\t" + "orl $(0x1<<30),%eax\n\t" + "movl %eax, %cr0\n\t" + + /* clear sth */ + "movl $0x269, %ecx\n\t" /* fix4k_c8000*/ + "xorl %edx, %edx\n\t" + "xorl %eax, %eax\n\t" + "wrmsr\n\t" +#if DCACHE_RAM_SIZE > 0x8000 + "movl $0x268, %ecx\n\t" /* fix4k_c0000*/ + "wrmsr\n\t" +#endif + + /* disable fixed mtrr from now on, it will be enabled by linuxbios_ram again*/ + "movl $0xC0010010, %ecx\n\t" +// "movl $SYSCFG_MSR, %ecx\n\t" + "rdmsr\n\t" + "andl $(~(3<<18)), %eax\n\t" +// "andl $(~(SYSCFG_MSR_MtrrFixDramModEn | SYSCFG_MSR_MtrrFixDramEn)), %eax\n\t" + "wrmsr\n\t" + + /* Set the default memory type and disable fixed and enable variable MTRRs */ + "movl $0x2ff, %ecx\n\t" +// "movl $MTRRdefType_MSR, %ecx\n\t" + "xorl %edx, %edx\n\t" + /* Enable Variable and Disable Fixed MTRRs */ + "movl $0x00000800, %eax\n\t" + "wrmsr\n\t" + +#if defined(CLEAR_FIRST_1M_RAM) + /* enable caching for first 1M using variable mtrr */ + "movl $0x200, %ecx\n\t" + "xorl %edx, %edx\n\t" + "movl $(0 | 1), %eax\n\t" +// "movl $(0 | MTRR_TYPE_WRCOMB), %eax\n\t" + "wrmsr\n\t" + + "movl $0x201, %ecx\n\t" + "movl $0x0000000f, %edx\n\t" + "movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax\n\t" + "wrmsr\n\t" +#endif + + /* enable cache */ + "movl %cr0, %eax\n\t" + "andl $0x9fffffff,%eax\n\t" + "movl %eax, %cr0\n\t" +#if defined(CLEAR_FIRST_1M_RAM) + /* clear the first 1M */ + "movl $0x0, %edi\n\t" + "cld\n\t" + "movl $(0x100000>>2), %ecx\n\t" + "xorl %eax, %eax\n\t" + "rep stosl\n\t" + + /* disable cache */ + "movl %cr0, %eax\n\t" + "orl $(0x1<<30),%eax\n\t" + "movl %eax, %cr0\n\t" + + /* enable caching for first 1M using variable mtrr */ + "movl $0x200, %ecx\n\t" + "xorl %edx, %edx\n\t" + "movl $(0 | 6), %eax\n\t" +// "movl $(0 | MTRR_TYPE_WRBACK), %eax\n\t" + "wrmsr\n\t" + + "movl $0x201, %ecx\n\t" + "movl $0x0000000f, %edx\n\t" + "movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax\n\t" + "wrmsr\n\t" + + /* enable cache */ + "movl %cr0, %eax\n\t" + "andl $0x9fffffff,%eax\n\t" + "movl %eax, %cr0\n\t" + "invd\n\t" + + /* + FIXME: I hope we don't need to change esp and ebp value here, so we can restore value from mmx sse back + But the problem is the range is some io related, So don't go back + */ +#endif + ); diff --git a/src/cpu/amd/car/copy_and_run.c b/src/cpu/amd/car/copy_and_run.c new file mode 100644 index 000000000..89a864d4f --- /dev/null +++ b/src/cpu/amd/car/copy_and_run.c @@ -0,0 +1,132 @@ +/* by yhlu 6.2005 + moved from nrv2v.c and some lines from crt0.S +*/ +#ifndef ENDIAN +#define ENDIAN 0 +#endif +#ifndef BITSIZE +#define BITSIZE 32 +#endif + +#define GETBIT_8(bb, src, ilen) \ + (((bb = bb & 0x7f ? bb*2 : ((unsigned)src[ilen++]*2+1)) >> 8) & 1) + +#define GETBIT_LE16(bb, src, ilen) \ + (bb*=2,bb&0xffff ? (bb>>16)&1 : (ilen+=2,((bb=(src[ilen-2]+src[ilen-1]*256u)*2+1)>>16)&1)) + +#define GETBIT_LE32(bb, src, ilen) \ + (bc > 0 ? ((bb>>--bc)&1) : (bc=31,\ + bb=*(const uint32_t *)((src)+ilen),ilen+=4,(bb>>31)&1)) + +#if ENDIAN == 0 && BITSIZE == 8 +#define GETBIT(bb, src, ilen) GETBIT_8(bb, src, ilen) +#endif +#if ENDIAN == 0 && BITSIZE == 16 +#define GETBIT(bb, src, ilen) GETBIT_LE16(bb, src, ilen) +#endif +#if ENDIAN == 0 && BITSIZE == 32 +#define GETBIT(bb, src, ilen) GETBIT_LE32(bb, src, ilen) +#endif + +static void copy_and_run(unsigned cpu_reset) +{ + uint8_t *src, *dst; + unsigned long dst_len; + unsigned long ilen = 0, olen = 0, last_m_off = 1; + uint32_t bb = 0; + unsigned bc = 0; + + print_debug("Copying LinuxBIOS to ram.\r\n"); + +#if !CONFIG_COMPRESS + __asm__ volatile ( + "leal _liseg, %0\n\t" + "leal _iseg, %1\n\t" + "leal _eiseg, %2\n\t" + "subl %1, %2\n\t" + : "=a" (src), "=b" (dst), "=c" (dst_len) + ); + memcpy(src, dst, dst_len); +#else + + __asm__ volatile ( + "leal 4+_liseg, %0\n\t" + "leal _iseg, %1\n\t" + : "=a" (src) , "=b" (dst) + ); + +#if CONFIG_USE_INIT + printk_debug("src=%08x\r\n",src); + printk_debug("dst=%08x\r\n",dst); +#else + print_debug("src="); print_debug_hex32(src); print_debug("\r\n"); + print_debug("dst="); print_debug_hex32(dst); print_debug("\r\n"); +#endif + + for(;;) { + unsigned int m_off, m_len; + while(GETBIT(bb, src, ilen)) { + dst[olen++] = src[ilen++]; + } + m_off = 1; + do { + m_off = m_off*2 + GETBIT(bb, src, ilen); + } while (!GETBIT(bb, src, ilen)); + if (m_off == 2) + { + m_off = last_m_off; + } + else + { + m_off = (m_off - 3)*256 + src[ilen++]; + if(m_off == 0xffffffffU) + break; + last_m_off = ++m_off; + } + m_len = GETBIT(bb, src, ilen); + m_len = m_len*2 + GETBIT(bb, src, ilen); + if (m_len == 0) + { + m_len++; + do { + m_len = m_len*2 + GETBIT(bb, src, ilen); + } while(!GETBIT(bb, src, ilen)); + m_len += 2; + } + m_len += (m_off > 0xd00); + { + const uint8_t *m_pos; + m_pos = dst + olen - m_off; + dst[olen++] = *m_pos++; + do { + dst[olen++] = *m_pos++; + } while(--m_len > 0); + } + } +#endif +// dump_mem(dst, dst+0x100); +#if CONFIG_USE_INIT + printk_debug("linxbios_ram.bin length = %08x\r\n", olen); +#else + print_debug("linxbios_ram.bin length = "); print_debug_hex32(olen); print_debug("\r\n"); +#endif + print_debug("Jumping to LinuxBIOS.\r\n"); + + if(cpu_reset == 1 ) { + __asm__ volatile ( + "movl $0xffffffff, %ebp\n\t" + ); + } + else { + __asm__ volatile ( + "xorl %ebp, %ebp\n\t" + ); + } + + __asm__ volatile ( + "cli\n\t" + "leal _iseg, %edi\n\t" + "jmp %edi\n\t" + ); + +} diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c index fdaf05cb6..b75025b4c 100644 --- a/src/cpu/amd/model_fxx/model_fxx_init.c +++ b/src/cpu/amd/model_fxx/model_fxx_init.c @@ -453,12 +453,12 @@ static struct cpu_device_id cpu_table[] = { { X86_VENDOR_AMD, 0x10f80 }, /* CH7-D0 */ { X86_VENDOR_AMD, 0x10fb0 }, //AMD_E0_SUPPORT - { X86_VENDOR_AMD, 0x20f50 }, /* SH7-E0*/ + { X86_VENDOR_AMD, 0x20f50 }, /* SH8-E0*/ { X86_VENDOR_AMD, 0x20f40 }, { X86_VENDOR_AMD, 0x20f70 }, - { X86_VENDOR_AMD, 0x20fc0 }, /* DH7-E0 */ /* DH-E3 */ + { X86_VENDOR_AMD, 0x20fc0 }, /* DH8-E0 */ /* DH-E3 */ { X86_VENDOR_AMD, 0x20ff0 }, - { X86_VENDOR_AMD, 0x20f10 }, /* JH7-E0 */ + { X86_VENDOR_AMD, 0x20f10 }, /* JH8-E1 */ { X86_VENDOR_AMD, 0x20f30 }, { X86_VENDOR_AMD, 0x20f51 }, /* SH-E4 */ { X86_VENDOR_AMD, 0x20f71 }, diff --git a/src/cpu/x86/car/cache_as_ram.inc b/src/cpu/x86/car/cache_as_ram.inc new file mode 100644 index 000000000..d610efbb3 --- /dev/null +++ b/src/cpu/x86/car/cache_as_ram.inc @@ -0,0 +1,192 @@ +/* We will use 4K bytes only */ +#define CacheSize DCACHE_RAM_SIZE +#define CacheBase DCACHE_RAM_BASE + +#include <cpu/x86/mtrr.h> + + /* Save the BIST result */ + movl %eax, %ebp + +CacheAsRam: + /* hope we can skip the double set for normal part */ +#if USE_FALLBACK_IMAGE == 1 + + /*Clear all MTRRs */ + + xorl %edx, %edx + movl $fixed_mtrr_msr, %esi +clear_fixed_var_mtrr: + lodsl (%esi), %eax + testl %eax, %eax + jz clear_fixed_var_mtrr_out + + movl %eax, %ecx + xorl %eax, %eax + wrmsr + + jmp clear_fixed_var_mtrr +clear_fixed_var_mtrr_out: + + /* enable caching for 64K using variable mtrr */ + movl $0x200, %ecx + xorl %edx, %edx + movl $(CacheBase | MTRR_TYPE_WRBACK), %eax + wrmsr + + movl $0x201, %ecx + movl $0x0000000f, %edx + movl $((~((CacheBase + CacheSize) - 1)) | 0x800), %eax + wrmsr + + /* Set the default memory type and enable variable MTRRs */ + movl $MTRRdefType_MSR, %ecx + xorl %edx, %edx + /* Enable Variable MTRRs */ + movl $0x00000800, %eax + wrmsr + + /* Disable fast string operation */ + movl $0x1a0, %ecx + rdmsr + andl $(~0x1), %eax + wrmsr +#else + /* disable cache */ + movl %cr0, %eax + orl $(0x1<<30),%eax + movl %eax, %cr0 + +#endif /* USE_FALLBACK_IMAGE == 1*/ + +#if 0 +#if defined(XIP_ROM_SIZE) && defined(XIP_ROM_BASE) + /* enable write base caching so we can do execute in place + * on the flash rom. + */ + movl $0x202, %ecx + xorl %edx, %edx + movl $(XIP_ROM_BASE | MTRR_TYPE_WRBACK), %eax + wrmsr + + movl $0x203, %ecx + movl $0x0000000f, %edx + movl $(~(XIP_ROM_SIZE - 1) | 0x800), %eax + wrmsr +#endif /* XIP_ROM_SIZE && XIP_ROM_BASE */ +#endif + + /* enable cache */ + movl %cr0, %eax + andl $0x9fffffff,%eax + movl %eax, %cr0 + +#if USE_FALLBACK_IMAGE == 1 + +// intel_chip_post_macro(0x11) /* post 11 */ + + /* Read the range with lodsl*/ + movl $CacheBase, %esi + cld + movl $(CacheSize>>2), %ecx + rep lodsl + + // Disable the cache. This is the trick. Processors + // Pentium Pro and above are designed to respond to cache + // hits with CD=1 and NW=1. That is read hits access the + // cache; write hits update the cache. With the tags + // established above and no snoop hit, the cache will + // behave as RAM. + movl %cr0, %eax + orl $0x60000000, %eax + movl %eax, %cr0 + + /* Clear the range */ + movl $CacheBase, %edi + cld + movl $(CacheSize>>2), %ecx + xorl %eax, %eax + rep stosl + + +#if 1 + /* check the cache as ram */ + movl $CacheBase, %esi + movl $(CacheSize>>2), %ecx +.xin1: + movl %esi, %eax + movl %eax, (%esi) + decl %ecx + je .xout1 + add $4, %esi + jmp .xin1 +.xout1: + + movl $CacheBase, %esi +// movl $(CacheSize>>2), %ecx + movl $4, %ecx +.xin1x: + movl %esi, %eax + + movl $0x4000, %edx + movb %ah, %al +.testx1: + outb %al, $0x80 + decl %edx + jnz .testx1 + + movl (%esi), %eax + cmpb 0xff, %al + je .xin2 /* dont show */ + + movl $0x4000, %edx +.testx2: + outb %al, $0x80 + decl %edx + jnz .testx2 + +.xin2: decl %ecx + je .xout1x + add $4, %esi + jmp .xin1x +.xout1x: + +#endif +#endif /*USE_FALLBACK_IMAGE == 1*/ + +// intel_chip_post_macro(0x12) /* post 12 */ + + movl $(CacheBase+CacheSize-4), %eax + movl %eax, %esp + + /* Load a different set of data segments */ +#if CONFIG_USE_INIT + movw $CACHE_RAM_DATA_SEG, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss +#endif + +lout: +// intel_chip_post_macro(0x13) /* post 13 */ + + /* Restore the BIST result */ + movl %ebp, %eax + /* We need to set ebp ? No need */ + movl %esp, %ebp + pushl %eax /* bist */ + call amd64_main + /* We will not go back */ + + +fixed_mtrr_msr: + .long 0x250, 0x258, 0x259 + .long 0x268, 0x269, 0x26A + .long 0x26B, 0x26C, 0x26D + .long 0x26E, 0x26F +var_mtrr_msr: + .long 0x200, 0x201, 0x202, 0x203 + .long 0x204, 0x205, 0x206, 0x207 + .long 0x208, 0x209, 0x20A, 0x20B + .long 0x20C, 0x20D, 0x20E, 0x20F + .long 0x000 /* NULL, end of table */ +.CacheAsRam_out: diff --git a/src/cpu/x86/car/cache_as_ram.lds b/src/cpu/x86/car/cache_as_ram.lds new file mode 100644 index 000000000..7f1b373db --- /dev/null +++ b/src/cpu/x86/car/cache_as_ram.lds @@ -0,0 +1,11 @@ +SECTIONS { + .init . : { + _init = .; + *(.init.text); + *(.init.rodata); + *(.init.rodata.*); + . = ALIGN(16); + _einit = .; + } + +} diff --git a/src/cpu/x86/car/cache_as_ram_post.c b/src/cpu/x86/car/cache_as_ram_post.c new file mode 100644 index 000000000..8cbc1e9cb --- /dev/null +++ b/src/cpu/x86/car/cache_as_ram_post.c @@ -0,0 +1,82 @@ + + __asm__ volatile ( + /* + FIXME : backup stack in CACHE_AS_RAM into mmx and sse and after we get STACK up, we restore that. + It is only needed if we want to go back + */ + + /* We don't need cache as ram for now on */ + /* disable cache */ + "movl %cr0, %eax\n\t" + "orl $(0x1<<30),%eax\n\t" + "movl %eax, %cr0\n\t" + + /* clear sth */ + "movl $0x200, %ecx\n\t" + "xorl %edx, %edx\n\t" + "xorl %eax, %eax\n\t" + "wrmsr\n\t" + "movl $0x201, %ecx\n\t" + "wrmsr\n\t" + + /* enable fast string operation */ + "movl $0x1a0, %ecx\n\t" + "rdmsr\n\t" + "orl $1, %eax\n\t" + "wrmsr\n\t" + +#if defined(CLEAR_FIRST_1M_RAM) + /* enable caching for first 1M using variable mtrr */ + "movl $0x200, %ecx\n\t" + "xorl %edx, %edx\n\t" + "movl $(0 | 1), %eax\n\t" +// "movl $(0 | MTRR_TYPE_WRCOMB), %eax\n\t" + "wrmsr\n\t" + + "movl $0x201, %ecx\n\t" + "movl $0x0000000f, %edx\n\t" /* AMD 40 bit 0xff*/ + "movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax\n\t" + "wrmsr\n\t" +#endif + + /* enable cache */ + "movl %cr0, %eax\n\t" + "andl $0x9fffffff,%eax\n\t" + "movl %eax, %cr0\n\t" +#if defined(CLEAR_FIRST_1M_RAM) + /* clear the first 1M */ + "movl $0x0, %edi\n\t" + "cld\n\t" + "movl $(0x100000>>2), %ecx\n\t" + "xorl %eax, %eax\n\t" + "rep stosl\n\t" + + /* disable cache */ + "movl %cr0, %eax\n\t" + "orl $(0x1<<30),%eax\n\t" + "movl %eax, %cr0\n\t" + + /* enable caching for first 1M using variable mtrr */ + "movl $0x200, %ecx\n\t" + "xorl %edx, %edx\n\t" + "movl $(0 | 6), %eax\n\t" +// "movl $(0 | MTRR_TYPE_WRBACK), %eax\n\t" + "wrmsr\n\t" + + "movl $0x201, %ecx\n\t" + "movl $0x0000000f, %edx\n\t" /* AMD 40 bit 0xff*/ + "movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax\n\t" + "wrmsr\n\t" + + /* enable cache */ + "movl %cr0, %eax\n\t" + "andl $0x9fffffff,%eax\n\t" + "movl %eax, %cr0\n\t" + "invd\n\t" + + /* + FIXME: I hope we don't need to change esp and ebp value here, so we can restore value from mmx sse back + But the problem is the range is some io related, So don't go back + */ +#endif + ); diff --git a/src/cpu/x86/car/copy_and_run.c b/src/cpu/x86/car/copy_and_run.c new file mode 100644 index 000000000..89a864d4f --- /dev/null +++ b/src/cpu/x86/car/copy_and_run.c @@ -0,0 +1,132 @@ +/* by yhlu 6.2005 + moved from nrv2v.c and some lines from crt0.S +*/ +#ifndef ENDIAN +#define ENDIAN 0 +#endif +#ifndef BITSIZE +#define BITSIZE 32 +#endif + +#define GETBIT_8(bb, src, ilen) \ + (((bb = bb & 0x7f ? bb*2 : ((unsigned)src[ilen++]*2+1)) >> 8) & 1) + +#define GETBIT_LE16(bb, src, ilen) \ + (bb*=2,bb&0xffff ? (bb>>16)&1 : (ilen+=2,((bb=(src[ilen-2]+src[ilen-1]*256u)*2+1)>>16)&1)) + +#define GETBIT_LE32(bb, src, ilen) \ + (bc > 0 ? ((bb>>--bc)&1) : (bc=31,\ + bb=*(const uint32_t *)((src)+ilen),ilen+=4,(bb>>31)&1)) + +#if ENDIAN == 0 && BITSIZE == 8 +#define GETBIT(bb, src, ilen) GETBIT_8(bb, src, ilen) +#endif +#if ENDIAN == 0 && BITSIZE == 16 +#define GETBIT(bb, src, ilen) GETBIT_LE16(bb, src, ilen) +#endif +#if ENDIAN == 0 && BITSIZE == 32 +#define GETBIT(bb, src, ilen) GETBIT_LE32(bb, src, ilen) +#endif + +static void copy_and_run(unsigned cpu_reset) +{ + uint8_t *src, *dst; + unsigned long dst_len; + unsigned long ilen = 0, olen = 0, last_m_off = 1; + uint32_t bb = 0; + unsigned bc = 0; + + print_debug("Copying LinuxBIOS to ram.\r\n"); + +#if !CONFIG_COMPRESS + __asm__ volatile ( + "leal _liseg, %0\n\t" + "leal _iseg, %1\n\t" + "leal _eiseg, %2\n\t" + "subl %1, %2\n\t" + : "=a" (src), "=b" (dst), "=c" (dst_len) + ); + memcpy(src, dst, dst_len); +#else + + __asm__ volatile ( + "leal 4+_liseg, %0\n\t" + "leal _iseg, %1\n\t" + : "=a" (src) , "=b" (dst) + ); + +#if CONFIG_USE_INIT + printk_debug("src=%08x\r\n",src); + printk_debug("dst=%08x\r\n",dst); +#else + print_debug("src="); print_debug_hex32(src); print_debug("\r\n"); + print_debug("dst="); print_debug_hex32(dst); print_debug("\r\n"); +#endif + + for(;;) { + unsigned int m_off, m_len; + while(GETBIT(bb, src, ilen)) { + dst[olen++] = src[ilen++]; + } + m_off = 1; + do { + m_off = m_off*2 + GETBIT(bb, src, ilen); + } while (!GETBIT(bb, src, ilen)); + if (m_off == 2) + { + m_off = last_m_off; + } + else + { + m_off = (m_off - 3)*256 + src[ilen++]; + if(m_off == 0xffffffffU) + break; + last_m_off = ++m_off; + } + m_len = GETBIT(bb, src, ilen); + m_len = m_len*2 + GETBIT(bb, src, ilen); + if (m_len == 0) + { + m_len++; + do { + m_len = m_len*2 + GETBIT(bb, src, ilen); + } while(!GETBIT(bb, src, ilen)); + m_len += 2; + } + m_len += (m_off > 0xd00); + { + const uint8_t *m_pos; + m_pos = dst + olen - m_off; + dst[olen++] = *m_pos++; + do { + dst[olen++] = *m_pos++; + } while(--m_len > 0); + } + } +#endif +// dump_mem(dst, dst+0x100); +#if CONFIG_USE_INIT + printk_debug("linxbios_ram.bin length = %08x\r\n", olen); +#else + print_debug("linxbios_ram.bin length = "); print_debug_hex32(olen); print_debug("\r\n"); +#endif + print_debug("Jumping to LinuxBIOS.\r\n"); + + if(cpu_reset == 1 ) { + __asm__ volatile ( + "movl $0xffffffff, %ebp\n\t" + ); + } + else { + __asm__ volatile ( + "xorl %ebp, %ebp\n\t" + ); + } + + __asm__ volatile ( + "cli\n\t" + "leal _iseg, %edi\n\t" + "jmp %edi\n\t" + ); + +} diff --git a/src/cpu/x86/lapic/boot_cpu.c b/src/cpu/x86/lapic/boot_cpu.c index d3a8f6e7a..bca73e137 100644 --- a/src/cpu/x86/lapic/boot_cpu.c +++ b/src/cpu/x86/lapic/boot_cpu.c @@ -1,6 +1,6 @@ #include <cpu/x86/msr.h> -int boot_cpu(void) +static int boot_cpu(void) { int bsp; msr_t msr; diff --git a/src/devices/emulator/x86emu/ops.c b/src/devices/emulator/x86emu/ops.c index 4666e93ff..95f7c9e68 100644 --- a/src/devices/emulator/x86emu/ops.c +++ b/src/devices/emulator/x86emu/ops.c @@ -70,7 +70,7 @@ * ****************************************************************************/ -#include "x86emu/x86emui.h" +#include "x86emui.h" /*----------------------------- Implementation ----------------------------*/ diff --git a/src/drivers/generic/debug/debug_dev.c b/src/drivers/generic/debug/debug_dev.c index 600b1fcf6..d5f9e628d 100644 --- a/src/drivers/generic/debug/debug_dev.c +++ b/src/drivers/generic/debug/debug_dev.c @@ -76,26 +76,26 @@ static void print_cpuid() printk_debug("Reading msr: 0x%08x\n", index); msr = rdmsr(index); printk_debug("msr[0x%08x]: 0x%08x%08x\n", - index, msr.hi, msr.hi); + index, msr.hi, msr.lo); } } static void print_smbus_regs(struct device *dev) { int j; - printk_debug("smbus: %s[%d]->", dev_path(dev->bus->dev), dev->bus->link ); - printk_debug("%s", dev_path(dev)); + printk_debug("smbus: %s[%d]->", dev_path(dev->bus->dev), dev->bus->link); + printk_debug("%s", dev_path(dev)); for(j = 0; j < 256; j++) { int status; unsigned char byte; - if ((j & 0xf) == 0) { - printk_debug("\r\n%02x: ", j); - } status = smbus_read_byte(dev, j); if (status < 0) { - printk_debug("bad device status= %08x\r\n", status); + // printk_debug("bad device status= %08x\r\n", status); break; } + if ((j & 0xf) == 0) { + printk_debug("\r\n%02x: ", j); + } byte = status & 0xff; printk_debug("%02x ", byte); } @@ -125,9 +125,113 @@ static void print_smbus_regs_all(struct device *dev) } } } +static void print_msr_dualcore(void) +{ + msr_t msr; + unsigned index; + unsigned eax, ebx, ecx, edx; + index = 0x80000008; + printk_debug("calling cpuid 0x%08x\n", index); + asm volatile( + "cpuid" + : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) + : "a" (index) + ); + printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", + index, eax, ebx, ecx, edx); + + printk_debug("core number %d\n", ecx & 0xff); + + index = 0xc001001f; + printk_debug("Reading msr: 0x%08x\n", index); + msr = rdmsr(index); + printk_debug("msr[0x%08x]: 0x%08x%08x bit 54 is %d\n", + index, msr.hi, msr.lo, (msr.hi>> (54-32)) & 1); +#if 0 + msr.hi |= (1<<(54-32)); + wrmsr(index, msr); + + msr = rdmsr(index); + printk_debug("msr[0x%08x]: 0x%08x%08x\n", + index, msr.hi, msr.lo); +#endif + +} + +static void print_cache_size(void) +{ + unsigned index; + unsigned int n, eax, ebx, ecx, edx; + + index = 0x80000000; + printk_debug("calling cpuid 0x%08x\n", index); + asm volatile( + "cpuid" + : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) + : "a" (index) + ); + n = eax; + + if (n >= 0x80000005) { + index = 0x80000005; + printk_debug("calling cpuid 0x%08x\n", index); + asm volatile( + "cpuid" + : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) + : "a" (index) + ); + printk_debug("CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", + edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); + } + + if (n >= 0x80000006) { + index = 0x80000006; + printk_debug("calling cpuid 0x%08x\n", index); + asm volatile( + "cpuid" + : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) + : "a" (index) + ); + printk_debug("CPU: L2 Cache: %dK (%d bytes/line)\n", + ecx >> 16, ecx & 0xFF); + } + +} + +struct tsc_struct { + unsigned lo; + unsigned hi; +}; +typedef struct tsc_struct tsc_t; + +static tsc_t rdtsc(void) +{ + tsc_t res; + asm volatile( + "rdtsc" + : "=a" (res.lo), "=d"(res.hi) /* outputs */ + ); + return res; +} + +static void print_tsc(void) { + + tsc_t tsc; + tsc = rdtsc(); + printk_debug("tsc: 0x%08x%08x\n", + tsc.hi, tsc.lo); + udelay(1); + tsc = rdtsc(); + printk_debug("tsc: 0x%08x%08x after udelay(1) \n", + tsc.hi, tsc.lo); + +} + static void debug_init(device_t dev) { +#if CONFIG_CHIP_NAME device_t parent; +#endif if (!dev->enabled) return; switch(dev->path.u.pnp.device) { @@ -155,6 +259,15 @@ static void debug_init(device_t dev) case 4: print_smbus_regs_all(&dev_root); break; + case 5: + print_msr_dualcore(); + break; + case 6: + print_cache_size(); + break; + case 7: + print_tsc(); + break; } } diff --git a/src/include/cpu/amd/mtrr.h b/src/include/cpu/amd/mtrr.h index 572997bae..2b7017d89 100644 --- a/src/include/cpu/amd/mtrr.h +++ b/src/include/cpu/amd/mtrr.h @@ -31,7 +31,7 @@ #define TOP_MEM_MASK 0x007fffff #define TOP_MEM_MASK_KB (TOP_MEM_MASK >> 10) -#ifndef __ROMCC__ +#if !defined( __ROMCC__ ) && !defined (ASSEMBLY) void amd_setup_mtrrs(void); #endif /* __ROMCC__ */ diff --git a/src/include/cpu/x86/bist.h b/src/include/cpu/x86/bist.h index 6a62150c6..ff66eabe9 100644 --- a/src/include/cpu/x86/bist.h +++ b/src/include/cpu/x86/bist.h @@ -4,9 +4,14 @@ static void report_bist_failure(unsigned long bist) { if (bist != 0) { +#if CONFIG_USE_INIT + printk_emerg("BIST failed: %08x", bist); +#else print_emerg("BIST failed: "); print_emerg_hex32(bist); +#endif die("\r\n"); + } } diff --git a/src/include/cpu/x86/cache.h b/src/include/cpu/x86/cache.h index 623ef971c..af7d3d52e 100644 --- a/src/include/cpu/x86/cache.h +++ b/src/include/cpu/x86/cache.h @@ -41,7 +41,7 @@ static inline void disable_cache(void) wbinvd(); } -#ifndef __ROMCC__ +#if !defined( __ROMCC__) && defined (__GNUC__) void x86_enable_cache(void); #endif /* !__ROMCC__ */ diff --git a/src/include/cpu/x86/msr.h b/src/include/cpu/x86/msr.h index 4f481bdf4..c4bc55a34 100644 --- a/src/include/cpu/x86/msr.h +++ b/src/include/cpu/x86/msr.h @@ -1,8 +1,7 @@ #ifndef CPU_X86_MSR_H #define CPU_X86_MSR_H - -#ifdef __ROMCC__ +#if defined( __ROMCC__) && !defined (__GNUC__) typedef __builtin_msr_t msr_t; @@ -16,9 +15,7 @@ static void wrmsr(unsigned long index, msr_t msr) __builtin_wrmsr(index, msr.lo, msr.hi); } -#endif /* __ROMCC__ */ - -#if defined(__GNUC__) && !defined(__ROMCC__) +#else typedef struct msr_struct { @@ -46,7 +43,7 @@ static inline void wrmsr(unsigned index, msr_t msr) ); } -#endif /* __GNUC__ */ +#endif /* ROMCC__ && !__GNUC__ */ #endif /* CPU_X86_MSR_H */ diff --git a/src/include/cpu/x86/mtrr.h b/src/include/cpu/x86/mtrr.h index eb9bcb416..3d229d23b 100644 --- a/src/include/cpu/x86/mtrr.h +++ b/src/include/cpu/x86/mtrr.h @@ -32,7 +32,7 @@ #define MTRRfix4K_F8000_MSR 0x26f -#if !defined(__ROMCC__) && !defined(ASSEMBLY) +#if !defined(__ROMCC__) && !defined (ASSEMBLY) void x86_setup_mtrrs(void); int x86_mtrr_check(void); diff --git a/src/include/delay.h b/src/include/delay.h index 0ffad4e61..bae75d34b 100644 --- a/src/include/delay.h +++ b/src/include/delay.h @@ -1,6 +1,6 @@ #ifndef DELAY_H #define DELAY_H -#ifndef __ROMCC__ +#if !defined( __ROMCC__) && defined (__GNUC__) void udelay(unsigned usecs); void mdelay(unsigned msecs); diff --git a/src/lib/Config.lb b/src/lib/Config.lb index bd6a2a909..32566d273 100644 --- a/src/lib/Config.lb +++ b/src/lib/Config.lb @@ -19,7 +19,7 @@ makedefine .PHONY : version.o if CONFIG_USE_INIT initobject uart8250.c - initobject memset.o +# initobject memset.o initobject memcpy.o - initobject memcmp.o +# initobject memcmp.o end diff --git a/src/mainboard/Iwill/DK8S2/Options.lb b/src/mainboard/Iwill/DK8S2/Options.lb index 373d1a98a..d7b694d1f 100644 --- a/src/mainboard/Iwill/DK8S2/Options.lb +++ b/src/mainboard/Iwill/DK8S2/Options.lb @@ -51,6 +51,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ## ROM_SIZE is the size of boot ROM that this board will use. default ROM_SIZE=524288 diff --git a/src/mainboard/Iwill/DK8X/Options.lb b/src/mainboard/Iwill/DK8X/Options.lb index f9987d439..0f413f049 100644 --- a/src/mainboard/Iwill/DK8X/Options.lb +++ b/src/mainboard/Iwill/DK8X/Options.lb @@ -51,6 +51,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ## ROM_SIZE is the size of boot ROM that this board will use. default ROM_SIZE=524288 diff --git a/src/mainboard/amd/quartet/Options.lb b/src/mainboard/amd/quartet/Options.lb index 052306ae0..7e2dc489a 100644 --- a/src/mainboard/amd/quartet/Options.lb +++ b/src/mainboard/amd/quartet/Options.lb @@ -47,6 +47,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ### ### Build options diff --git a/src/mainboard/amd/serenade/Options.lb b/src/mainboard/amd/serenade/Options.lb index 11bc28b23..fedc518d8 100644 --- a/src/mainboard/amd/serenade/Options.lb +++ b/src/mainboard/amd/serenade/Options.lb @@ -47,6 +47,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ### ### Build options ### diff --git a/src/mainboard/amd/solo/Options.lb b/src/mainboard/amd/solo/Options.lb index eec85778d..42611440f 100644 --- a/src/mainboard/amd/solo/Options.lb +++ b/src/mainboard/amd/solo/Options.lb @@ -48,6 +48,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ### ### Build options diff --git a/src/mainboard/arima/hdama/Options.lb b/src/mainboard/arima/hdama/Options.lb index 1972c39fe..773d698ad 100644 --- a/src/mainboard/arima/hdama/Options.lb +++ b/src/mainboard/arima/hdama/Options.lb @@ -53,6 +53,8 @@ uses OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN +uses CONFIG_USE_INIT + ### ### Build options ### diff --git a/src/mainboard/ibm/e325/Options.lb b/src/mainboard/ibm/e325/Options.lb index 74f74a787..9bad59565 100644 --- a/src/mainboard/ibm/e325/Options.lb +++ b/src/mainboard/ibm/e325/Options.lb @@ -47,6 +47,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ### ### Build options diff --git a/src/mainboard/island/aruma/Options.lb b/src/mainboard/island/aruma/Options.lb index 4e2cef1ff..fc9489a29 100644 --- a/src/mainboard/island/aruma/Options.lb +++ b/src/mainboard/island/aruma/Options.lb @@ -53,6 +53,8 @@ uses CONFIG_GDB_STUB uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN +uses CONFIG_USE_INIT + ### ### Build options ### diff --git a/src/mainboard/newisys/khepri/Options.lb b/src/mainboard/newisys/khepri/Options.lb index c975e08c8..d80f0c390 100644 --- a/src/mainboard/newisys/khepri/Options.lb +++ b/src/mainboard/newisys/khepri/Options.lb @@ -47,6 +47,8 @@ uses CC uses HOSTCC uses OBJCOPY +uses CONFIG_USE_INIT + ### ### Build options ### diff --git a/src/mainboard/tyan/s2735/Config.lb b/src/mainboard/tyan/s2735/Config.lb index 6ce12ebfd..37d6493e7 100644 --- a/src/mainboard/tyan/s2735/Config.lb +++ b/src/mainboard/tyan/s2735/Config.lb @@ -16,6 +16,7 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -34,6 +35,7 @@ default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) arch i386 end + ## ## Build the objects we have code for in this directory. ## @@ -42,7 +44,26 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM + +if CONFIG_USE_INIT + +makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" +end + +else +makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" +end + +end +else ## ## Romcc output @@ -66,13 +87,24 @@ makerule ./auto.inc action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end +end + ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/intel/car/cache_as_ram.lds + end +end + ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -85,8 +117,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end +if USE_DCACHE_RAM +else ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -94,23 +129,40 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds +if USE_DCACHE_RAM +## +## Setup Cache-As-Ram +## +mainboardinit cpu/intel/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc +if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds +else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end end - -### -### O.k. We aren't just an intermediary anymore! -### ## ## Setup RAM ## +if USE_DCACHE_RAM + +if CONFIG_USE_INIT +initobject auto.o +else +mainboardinit ./auto.inc +end + +else +# ROMCC mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit cpu/x86/sse/enable_sse.inc @@ -118,15 +170,16 @@ mainboardinit ./auto.inc mainboardinit cpu/x86/sse/disable_sse.inc mainboardinit cpu/x86/mmx/disable_mmx.inc +end + ## ## Include the secondary Configuration files ## -dir /pc80 - if CONFIG_CHIP_NAME config chip.h end + # sample config for tyan/s2735 chip northbridge/intel/e7501 device pci_domain 0 on @@ -135,7 +188,12 @@ chip northbridge/intel/e7501 device pci 2.0 on chip southbridge/intel/i82870 device pci 1c.0 on end - device pci 1d.0 on end + device pci 1d.0 on + chip drivers/pci/onboard + device pci 1.0 on end # intel lan + device pci 1.1 on end + end + end device pci 1e.0 on end device pci 1f.0 on end end @@ -147,42 +205,55 @@ chip northbridge/intel/e7501 device pci 1d.2 on end device pci 1d.3 on end device pci 1d.7 on end - device pci 1e.0 on end + device pci 1e.0 on + chip drivers/pci/onboard + device pci 1.0 on end # intel lan 10/100 + end + chip drivers/pci/onboard + device pci 2.0 on end # ati + end + end device pci 1f.0 on - # device pci 8.0 end - chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - end - end + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end end device pci 1f.1 off end device pci 1f.2 on end diff --git a/src/mainboard/tyan/s2735/Options.lb b/src/mainboard/tyan/s2735/Options.lb index 98c7e50f4..16b23a66b 100644 --- a/src/mainboard/tyan/s2735/Options.lb +++ b/src/mainboard/tyan/s2735/Options.lb @@ -9,7 +9,9 @@ uses HARD_RESET_FUNCTION uses IRQ_SLOT_COUNT uses HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS +uses SERIAL_CPU_INIT uses CONFIG_IOAPIC uses CONFIG_SMP uses FALLBACK_SIZE @@ -33,8 +35,15 @@ uses LB_CKS_LOC uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses LINUXBIOS_EXTRA_VERSION uses _RAMBASE +uses CONFIG_GDB_STUB +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY uses TTYS0_BAUD uses TTYS0_BASE uses TTYS0_LCS @@ -44,31 +53,35 @@ uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 +uses CONFIG_CONSOLE_BTEXT uses HAVE_INIT_TIMER uses CONFIG_GDB_STUB -uses CROSS_COMPILE -uses CC -uses HOSTCC -uses OBJCOPY uses CONFIG_CHIP_NAME +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN -### -### Build options -### +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT -## ## ROM_SIZE is the size of boot ROM that this board will use. -#512K bytes -#default ROM_SIZE=524288 +#512K bytes +default ROM_SIZE=524288 #1M bytes -default ROM_SIZE=1048576 +#default ROM_SIZE=1048576 + ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## default FALLBACK_SIZE=131072 +### +### Build options +### + ## ## Build code for the fallback boot ## @@ -79,23 +92,21 @@ default HAVE_FALLBACK_BOOT=1 ## default HAVE_HARD_RESET=1 -## -## Funky hard reset implementation -## -#default HARD_RESET_BUS=3 -#default HARD_RESET_DEVICE=4 -#default HARD_RESET_FUNCTION=0 +default HARD_RESET_BUS=1 +default HARD_RESET_DEVICE=4 +default HARD_RESET_FUNCTION=0 ## Delay timer options ## default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 + ## ## Build code to export a programmable irq routing table ## default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=15 +default IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table @@ -121,8 +132,28 @@ default LB_CKS_LOC=123 ## default CONFIG_SMP=1 default CONFIG_MAX_CPUS=4 +default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 +default SERIAL_CPU_INIT=0 + +#BTEXT Console +#default CONFIG_CONSOLE_BTEXT=1 + +#VGA Console +#default CONFIG_CONSOLE_VGA=1 +#default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xF2000000 +#default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +#default CONFIG_USE_INIT=1 + + ## ## Build code to setup a generic IOAPIC ## @@ -131,8 +162,10 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2735" +default MAINBOARD_PART_NUMBER="s2735" +default MAINBOARD_VENDOR="Tyan" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2735 ### ### LinuxBIOS layout values diff --git a/src/mainboard/tyan/s2735/auto.c b/src/mainboard/tyan/s2735/auto.c index 5874d5ea3..9cf5e5018 100644 --- a/src/mainboard/tyan/s2735/auto.c +++ b/src/mainboard/tyan/s2735/auto.c @@ -10,7 +10,9 @@ #include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" + #include "arch/i386/lib/console.c" + #include "ram/ramtest.c" #include "southbridge/intel/i82801er/i82801er_early_smbus.c" #include "northbridge/intel/e7501/raminit.h" @@ -51,6 +53,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); } + #include "northbridge/intel/e7501/raminit.c" #include "northbridge/intel/e7501/reset_test.c" #include "sdram/generic_sdram.c" @@ -87,7 +90,7 @@ static void main(unsigned long bist) #endif if(!bios_reset_detected()) { enable_smbus(); -#if 1 +#if 0 dump_spd_registers(&memctrl[0]); // dump_smbus_registers(); #endif @@ -126,17 +129,16 @@ static void main(unsigned long bist) print_debug_hex32(msr.lo); print_debug("\r\n"); #endif -/* -#if 0 + +#if 0 ram_check(0x00000000, msr.lo+(msr.hi<<32)); -#else -#if 1 +#endif + +#if 0 // Check 16MB of memory @ 0 ram_check(0x00000000, 0x01000000); -#else // Check 16MB of memory @ 2GB - ram_check(0x80000000, 0x81000000); -#endif +// ram_check(0x80000000, 0x81000000); #endif -*/ + } diff --git a/src/mainboard/tyan/s2735/cache_as_ram_auto.c b/src/mainboard/tyan/s2735/cache_as_ram_auto.c new file mode 100644 index 000000000..ebfc647d1 --- /dev/null +++ b/src/mainboard/tyan/s2735/cache_as_ram_auto.c @@ -0,0 +1,343 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + +#include "southbridge/intel/i82801er/i82801er_early_smbus.c" +#include "northbridge/intel/e7501/raminit.h" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/intel/e7501/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + /* full reset */ + outb(0x0a, 0x0cf9); + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ +#if 1 + /* link reset */ + outb(0x02, 0x0cf9); + outb(0x06, 0x0cf9); +#endif +} + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + + +#include "northbridge/intel/e7501/raminit.c" +#include "northbridge/intel/e7501/reset_test.c" +#include "sdram/generic_sdram.c" + + +#include "cpu/intel/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/intel/i82801er/cmos_failover.c" + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if 1 +#if 0 + unsigned cmos_result; + int i; + for(i=0;i<2;i++) { + cmos_result = cmos_read(0x10); + outb(cmos_result, 0x80); + } +#endif +__asm__ volatile ( + "movl $(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-4), %esi\n\t" +// "movl $(DCACHE_RAM_SIZE>>2), %ecx\n\t" + "movl $8, %ecx\n\t" +".yin1x:\n\t" + "movl %esi, %eax\n\t" + + "movl $0x2000, %edx\n\t" + "movb %ah, %al\n\t" +".testy1:\n\t" + "outb %al, $0x80\n\t" + "decl %edx\n\t" + "jnz .testy1\n\t" + + "movl (%esi), %eax\n\t" + "cmpb 0xff, %al\n\t" + "je .yin2\n\t" + + "movl $0x2000, %edx\n\t" +".testy2:\n\t" + "outb %al, $0x80\n\t" + "decl %edx\n\t" + "jnz .testy2\n\t" + +".yin2: decl %ecx\n\t" + "je .yout1x\n\t" + "sub $4, %esi\n\t" + "jmp .yin1x\n\t" +".yout1x:\n\t" +); +#endif + /* Is this a deliberate reset by the bios */ +// post_code(0x22); + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else { + check_cmos_failed(); + if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + } + normal_image: +// post_code(0x23); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +// post_code(0x24); +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: +// post_code(0x25); + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller memctrl[] = { + { + .d0 = PCI_DEV(0, 0, 0), + .d0f1 = PCI_DEV(0, 0, 1), + .channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 }, + .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 }, + }, + }; + + unsigned cpu_reset = 0; +#if 1 +__asm__ volatile ( + "movl $(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-4), %esi\n\t" +// "movl $(DCACHE_RAM_SIZE>>2), %ecx\n\t" + "movl $8, %ecx\n\t" +".zin1x:\n\t" + "movl %esi, %eax\n\t" + + "movl $0x2000, %edx\n\t" + "movb %ah, %al\n\t" +".testz1:\n\t" + "outb %al, $0x80\n\t" + "decl %edx\n\t" + "jnz .testz1\n\t" + + "movl (%esi), %eax\n\t" + "cmpb 0xff, %al\n\t" + "je .zin2\n\t" + + "movl $0x2000, %edx\n\t" +".testz2:\n\t" + "outb %al, $0x80\n\t" + "decl %edx\n\t" + "jnz .testz2\n\t" + +".zin2: decl %ecx\n\t" + "je .zout1x\n\t" + "sub $4, %esi\n\t" + "jmp .zin1x\n\t" +".zout1x:\n\t" +); +#endif + + if (bist == 0) + { +// early_mtrr_init(); + enable_lapic(); + + } + +// post_code(0x32); + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + +// setup_s2735_resource_map(); + + if(bios_reset_detected()) { + cpu_reset = 1; + goto cpu_reset_x; + } + + enable_smbus(); +#if 0 + dump_spd_registers(&memctrl[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(1, memctrl); + +#if 0 + dump_pci_devices(); +#endif + +#if 1 + dump_pci_device(PCI_DEV(0, 0, 0)); +#endif + + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } + +#endif +#if 1 + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/intel/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/intel/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + /* We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("Use Ram as Stack now - done\r\n"); + } else + { + print_debug("Use Ram as Stack now - \r\n"); + } +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } +#endif + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index c82909872..c9b56b281 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -57,6 +57,8 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses CONFIG_USE_INIT + ### ### Build options ### @@ -139,8 +141,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2850" +default MAINBOARD_PART_NUMBER="s2850" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2850 diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb index d1e22c006..5851318be 100644 --- a/src/mainboard/tyan/s2875/Options.lb +++ b/src/mainboard/tyan/s2875/Options.lb @@ -56,6 +56,8 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses CONFIG_USE_INIT + ### ### Build options ### @@ -124,8 +126,8 @@ default CONFIG_LOGICAL_CPUS=0 default K8_E0_MEM_HOLE_SIZEK=0x100000 #VGA Console -default CONFIG_CONSOLE_VGA=1 -default CONFIG_PCI_ROM_RUN=1 +#default CONFIG_CONSOLE_VGA=1 +#default CONFIG_PCI_ROM_RUN=1 ## ## Build code to setup a generic IOAPIC @@ -135,8 +137,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2875" +default MAINBOARD_PART_NUMBER="s2875" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2875 diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb index af9aea7b3..a6b4e86f5 100644 --- a/src/mainboard/tyan/s2880/Options.lb +++ b/src/mainboard/tyan/s2880/Options.lb @@ -56,6 +56,8 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses CONFIG_USE_INIT + ### ### Build options ### @@ -135,8 +137,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2880" +default MAINBOARD_PART_NUMBER="s2880" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2880 diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb index 47ab2df45..2e564ce9e 100644 --- a/src/mainboard/tyan/s2881/Config.lb +++ b/src/mainboard/tyan/s2881/Config.lb @@ -39,10 +39,33 @@ arch i386 end ## driver mainboard.o + +#dir /drivers/si/3114 + if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM + +if CONFIG_USE_INIT + +makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" +end + +else + +makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" +end + +end +else ## ## Romcc output @@ -66,13 +89,22 @@ makerule ./auto.inc action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end +end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -85,8 +117,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end +if USE_DCACHE_RAM +else ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -94,14 +129,25 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds +if USE_DCACHE_RAM +## +## Setup Cache-As-Ram +## +mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc +if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds +else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end end ### @@ -111,6 +157,19 @@ end ## ## Setup RAM ## +if USE_DCACHE_RAM + +if CONFIG_USE_INIT +initobject auto.o +else +mainboardinit ./auto.inc +end + +else + +## +## Setup RAM +## mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit cpu/x86/sse/enable_sse.inc @@ -118,11 +177,13 @@ mainboardinit ./auto.inc mainboardinit cpu/x86/sse/disable_sse.inc mainboardinit cpu/x86/mmx/disable_mmx.inc +end + ## ## Include the secondary Configuration files ## if CONFIG_CHIP_NAME - config chip.h + config chip.h end # sample config for tyan/s2881 diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb index 53ae8db51..84fa34e56 100644 --- a/src/mainboard/tyan/s2881/Options.lb +++ b/src/mainboard/tyan/s2881/Options.lb @@ -47,6 +47,7 @@ uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 uses HAVE_INIT_TIMER uses CONFIG_GDB_STUB +uses CONFIG_GDB_STUB uses CROSS_COMPILE uses CC uses HOSTCC @@ -56,6 +57,11 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ### ### Build options ### @@ -120,6 +126,9 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 +#CHIP_NAME ? +default CONFIG_CHIP_NAME=1 + #1G memory hole default K8_E0_MEM_HOLE_SIZEK=0x100000 @@ -127,6 +136,15 @@ default K8_E0_MEM_HOLE_SIZEK=0x100000 default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC ## @@ -135,8 +153,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2881" +default MAINBOARD_PART_NUMBER="s2881" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2881 diff --git a/src/mainboard/tyan/s2881/cache_as_ram_auto.c b/src/mainboard/tyan/s2881/cache_as_ram_auto.c new file mode 100644 index 000000000..b1e3719c7 --- /dev/null +++ b/src/mainboard/tyan/s2881/cache_as_ram_auto.c @@ -0,0 +1,393 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#include "resourcemap.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid(); + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ +// post_code(0x21); + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the ck804 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ +// post_code(0x22); + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: +// post_code(0x23); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +// post_code(0x24); +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: +// post_code(0x25); + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid +#else + nodeid = get_node_id(); +#endif + + enable_lapic(); + init_timer(); + + +#if CONFIG_LOGICAL_CPUS==1 + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2881_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + start_other_cores(); +#endif + + needs_reset |= ht_setup_chains_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } +#endif + + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("done\r\n"); + } else + { + print_debug("\r\n"); + } + +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb index e708936f4..7739a67ca 100644 --- a/src/mainboard/tyan/s2882/Config.lb +++ b/src/mainboard/tyan/s2882/Config.lb @@ -39,10 +39,34 @@ arch i386 end ## driver mainboard.o + +#dir /drivers/si/3114 + if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM + +if CONFIG_USE_INIT + +makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" +end + +else + +makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" +end + +end +else + ## ## Romcc output ## @@ -65,13 +89,22 @@ makerule ./auto.inc action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end +end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -84,8 +117,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end +if USE_DCACHE_RAM +else ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -93,14 +129,25 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds +if USE_DCACHE_RAM +## +## Setup Cache-As-Ram +## +mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc +if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds +else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end end ### @@ -110,6 +157,19 @@ end ## ## Setup RAM ## +if USE_DCACHE_RAM + +if CONFIG_USE_INIT +initobject auto.o +else +mainboardinit ./auto.inc +end + +else + +## +## Setup RAM +## mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit cpu/x86/sse/enable_sse.inc @@ -117,11 +177,13 @@ mainboardinit ./auto.inc mainboardinit cpu/x86/sse/disable_sse.inc mainboardinit cpu/x86/mmx/disable_mmx.inc +end + ## ## Include the secondary Configuration files ## if CONFIG_CHIP_NAME - config chip.h + config chip.h end # sample config for tyan/s2882 diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb index 4f084c86b..124971921 100644 --- a/src/mainboard/tyan/s2882/Options.lb +++ b/src/mainboard/tyan/s2882/Options.lb @@ -47,6 +47,7 @@ uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 uses HAVE_INIT_TIMER uses CONFIG_GDB_STUB +uses CONFIG_GDB_STUB uses CROSS_COMPILE uses CC uses HOSTCC @@ -56,6 +57,11 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ### ### Build options ### @@ -120,6 +126,9 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 +#CHIP_NAME ? +default CONFIG_CHIP_NAME=1 + #1G memory hole default K8_E0_MEM_HOLE_SIZEK=0x100000 @@ -127,6 +136,15 @@ default K8_E0_MEM_HOLE_SIZEK=0x100000 default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC ## @@ -135,8 +153,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2882" +default MAINBOARD_PART_NUMBER="s2882" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2882 diff --git a/src/mainboard/tyan/s2882/cache_as_ram_auto.c b/src/mainboard/tyan/s2882/cache_as_ram_auto.c new file mode 100644 index 000000000..5c92e8420 --- /dev/null +++ b/src/mainboard/tyan/s2882/cache_as_ram_auto.c @@ -0,0 +1,389 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/resourcemap.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid(); + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the ck804 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid +#else + nodeid = get_node_id(); +#endif + + enable_lapic(); + init_timer(); + + +#if CONFIG_LOGICAL_CPUS==1 + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_default_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + start_other_cores(); +#endif + needs_reset |= ht_setup_chains_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } +#endif + + + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("done\r\n"); + } else + { + print_debug("\r\n"); + } + +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index f7374c24a..a29c713ac 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -46,6 +46,26 @@ if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM + +if CONFIG_USE_INIT + +makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" +end + +else + +makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" +end + +end +else ## ## Romcc output @@ -69,13 +89,22 @@ makerule ./auto.inc action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end +end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -88,8 +117,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end +if USE_DCACHE_RAM +else ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -97,14 +129,25 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds +if USE_DCACHE_RAM +## +## Setup Cache-As-Ram +## +mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc +if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds +else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end end ### @@ -114,6 +157,19 @@ end ## ## Setup RAM ## +if USE_DCACHE_RAM + +if CONFIG_USE_INIT +initobject auto.o +else +mainboardinit ./auto.inc +end + +else + +## +## Setup RAM +## mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit cpu/x86/sse/enable_sse.inc @@ -121,6 +177,8 @@ mainboardinit ./auto.inc mainboardinit cpu/x86/sse/disable_sse.inc mainboardinit cpu/x86/mmx/disable_mmx.inc +end + ## ## Include the secondary Configuration files ## diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index 74aaedbe6..7bc324e60 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -57,6 +57,11 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ### ### Build options ### @@ -131,6 +136,15 @@ default K8_E0_MEM_HOLE_SIZEK=0x100000 default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC ## @@ -139,8 +153,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2885" +default MAINBOARD_PART_NUMBER="s2885" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2885 diff --git a/src/mainboard/tyan/s2885/cache_as_ram_auto.c b/src/mainboard/tyan/s2885/cache_as_ram_auto.c new file mode 100644 index 000000000..4bbbdf0e5 --- /dev/null +++ b/src/mainboard/tyan/s2885/cache_as_ram_auto.c @@ -0,0 +1,472 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#if 0 + #define ENABLE_APIC_EXT_ID 1 + #define APIC_ID_OFFSET 0x10 + #define LIFT_BSP_APIC_ID 0 +#else + #define ENABLE_APIC_EXT_ID 0 +#endif +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid(); + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ +// post_code(0x21); + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the ck804 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ +// post_code(0x22); + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: +// post_code(0x23); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +// post_code(0x24); +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: +// post_code(0x25); + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid + #if ENABLE_APIC_EXT_ID == 1 + if(id.coreid == 0) { + enable_apic_ext_id(id.nodeid); + } + #endif +#else + nodeid = get_node_id(); + #if ENABLE_APIC_EXT_ID == 1 + enable_apic_ext_id(nodeid); + #endif +#endif + + enable_lapic(); + init_timer(); + +// post_code(0x30); + +#if CONFIG_LOGICAL_CPUS==1 + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if( id.nodeid != 0 ) //all except cores in node0 + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); + #endif + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { +// __asm__ volatile ("jmp __cpu_reset"); + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); +// start_other_core(id.nodeid); + } +#else + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if(nodeid != 0) + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 + + #endif + if (cpu_init_detected(nodeid)) { +// __asm__ volatile ("jmp __cpu_reset"); + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + +// post_code(0x31); + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + +// post_code(0x32); + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + +// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2885_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + start_other_cores(); +#endif +#if 0 + + // You need to preset bus num in PCI_DEV(0, 0x18,1) 0xe0, 0xe4, 0xe8, 0xec + needs_reset |= ht_setup_chains(2); +#else + // automatically set that for you, but you might meet tight space + needs_reset |= ht_setup_chains_x(); +#endif + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + + /* Check all of memory */ +#if 0 + msr_t msr; + msr = rdmsr(TOP_MEM2); + print_debug("TOP_MEM2: "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\r\n"); +#endif +#if 0 + ram_check(0x00000000, msr.lo+(msr.hi<<32)); +#endif + +#if 0 + // Check 16MB of memory @ 0 + ram_check(0x00000000, 0x00100000); + // Check 16MB of memory @ 2GB + ram_check(0x80000000, 0x80100000); +#endif + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } +#endif + +#if 1 + + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("done\r\n"); + } else + { + print_debug("\r\n"); + } + +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } +#endif + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb index 0f428d10c..53a7fee36 100644 --- a/src/mainboard/tyan/s2891/Config.lb +++ b/src/mainboard/tyan/s2891/Config.lb @@ -47,26 +47,51 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" + end + + else + + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + + end +else + + ## + ## Romcc output + ## + makerule ./failover.E + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## @@ -75,7 +100,16 @@ end mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -88,8 +122,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc +if USE_DCACHE_RAM +else + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -105,14 +142,24 @@ if USE_FALLBACK_IMAGE ldscript /southbridge/nvidia/ck804/romstrap.lds end +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc + ldscript /arch/i386/lib/failover.lds + if USE_DCACHE_RAM + else + mainboardinit ./failover.inc + end end ### @@ -122,12 +169,25 @@ end ## ## Setup RAM ## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end + +else + # ROMCC + mainboardinit cpu/x86/fpu/enable_fpu.inc + mainboardinit cpu/x86/mmx/enable_mmx.inc + mainboardinit cpu/x86/sse/enable_sse.inc + mainboardinit ./auto.inc + mainboardinit cpu/x86/sse/disable_sse.inc + mainboardinit cpu/x86/mmx/disable_mmx.inc + +end + ## ## Include the secondary Configuration files @@ -247,7 +307,8 @@ chip northbridge/amd/amdk8/root_complex # chip drivers/ati/ragexl chip drivers/pci/onboard device pci 7.0 on end - register "rom_address" = "0xfff80000" + register "rom_address" = "0xfff80000" #for 512K + #register "rom_address" = "0xfff00000" #for 1M end end device pci a.0 off end # NIC @@ -283,13 +344,14 @@ chip northbridge/amd/amdk8/root_complex end #mc0 end # pci_domain - -# chip drivers/generic/debug -# device pnp 0.0 off end -# device pnp 0.1 off end -# device pnp 0.2 off end -# device pnp 0.3 off end -# device pnp 0.4 off end -# device pnp 0.5 on end -# end +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# end end # root_complex diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index b4a374db7..7147c69d7 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -60,10 +60,19 @@ uses K8_E0_MEM_HOLE_SIZEK uses CK804_DEVN_BASE +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ## ROM_SIZE is the size of boot ROM that this board will use. #512K bytes default ROM_SIZE=524288 +#1M bytes +#default ROM_SIZE=1048576 + + ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## @@ -83,9 +92,9 @@ default HAVE_FALLBACK_BOOT=1 ## default HAVE_HARD_RESET=1 -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 +#default HARD_RESET_BUS=1 +#default HARD_RESET_DEVICE=4 +#default HARD_RESET_FUNCTION=0 ## ## Build code to export a programmable irq routing table @@ -131,8 +140,17 @@ default CK804_DEVN_BASE=0 #default CONFIG_CONSOLE_BTEXT=1 #VGA Console -default CONFIG_CONSOLE_VGA=1 -default CONFIG_PCI_ROM_RUN=1 +#default CONFIG_CONSOLE_VGA=1 +#default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC @@ -142,8 +160,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2891" +default MAINBOARD_PART_NUMBER="s2891" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2891 diff --git a/src/mainboard/tyan/s2891/cache_as_ram_auto.c b/src/mainboard/tyan/s2891/cache_as_ram_auto.c new file mode 100644 index 000000000..b0ddb837a --- /dev/null +++ b/src/mainboard/tyan/s2891/cache_as_ram_auto.c @@ -0,0 +1,411 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include "northbridge/amd/amdk8/cpu_rev.c" +//#define K8_HT_FREQ_1G_SUPPORT 1 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/ck804_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* full reset */ + outb(0x0a, 0x0cf9); + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); +#if 1 + /* link reset */ + outb(0x02, 0x0cf9); + outb(0x06, 0x0cf9); +#endif +} + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#define CK804_NUM 1 +#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" +#include "southbridge/nvidia/ck804/ck804_early_setup.c" + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/nvidia/ck804/ck804_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + + unsigned value; + uint32_t dword; + uint8_t byte; + + byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0) | (1<<1); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + +#if 1 + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword); + +#endif + +} +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid() & 0xf; + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid +#else + nodeid = get_node_id(); +#endif + + enable_lapic(); +// init_timer(); + +#if CONFIG_LOGICAL_CPUS==1 + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + + } + + init_timer(); // only do it it first CPU + + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2891_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + start_other_cores(); +#endif + needs_reset |= ht_setup_chains_x(); + + needs_reset |= ck804_early_setup_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } + +#endif + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + /* We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("Use Ram as Stack now - done\r\n"); + } else + { + print_debug("Use Ram as Stack now - \r\n"); + } +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb index 215c4a80d..504f12d27 100644 --- a/src/mainboard/tyan/s2892/Config.lb +++ b/src/mainboard/tyan/s2892/Config.lb @@ -47,6 +47,28 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o + +if USE_DCACHE_RAM + +if CONFIG_USE_INIT + +makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" +end + +else + +makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" +end + +end +else + ## ## Romcc output ## @@ -69,13 +91,25 @@ makerule ./auto.inc action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end + +end + ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -88,8 +122,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end +if USE_DCACHE_RAM +else ### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -105,15 +142,26 @@ if USE_FALLBACK_IMAGE ldscript /southbridge/nvidia/ck804/romstrap.lds end +if USE_DCACHE_RAM +## +## Setup Cache-As-Ram +## +mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds +if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds +else + ldscript /arch/i386/lib/failover.lds mainboardinit ./failover.inc end +end ### ### O.k. We aren't just an intermediary anymore! @@ -122,6 +170,16 @@ end ## ## Setup RAM ## +if USE_DCACHE_RAM + +if CONFIG_USE_INIT +initobject auto.o +else +mainboardinit ./auto.inc +end + +else +# ROMCC mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit cpu/x86/sse/enable_sse.inc @@ -129,6 +187,8 @@ mainboardinit ./auto.inc mainboardinit cpu/x86/sse/disable_sse.inc mainboardinit cpu/x86/mmx/disable_mmx.inc +end + ## ## Include the secondary Configuration files ## diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index 6423773a2..20b58bce8 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -60,10 +60,19 @@ uses K8_E0_MEM_HOLE_SIZEK uses CK804_DEVN_BASE +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ## ROM_SIZE is the size of boot ROM that this board will use. #512K bytes default ROM_SIZE=524288 +#1M bytes +#default ROM_SIZE=1048576 + + ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## @@ -83,9 +92,9 @@ default HAVE_FALLBACK_BOOT=1 ## default HAVE_HARD_RESET=1 -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 +#default HARD_RESET_BUS=1 +#default HARD_RESET_DEVICE=4 +#default HARD_RESET_FUNCTION=0 ## ## Build code to export a programmable irq routing table @@ -134,6 +143,14 @@ default CK804_DEVN_BASE=0 default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC @@ -143,8 +160,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2892" +default MAINBOARD_PART_NUMBER="s2892" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2892 diff --git a/src/mainboard/tyan/s2892/cache_as_ram_auto.c b/src/mainboard/tyan/s2892/cache_as_ram_auto.c new file mode 100644 index 000000000..14b15d477 --- /dev/null +++ b/src/mainboard/tyan/s2892/cache_as_ram_auto.c @@ -0,0 +1,415 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/ck804_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* full reset */ + outb(0x0a, 0x0cf9); + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); +#if 1 + /* link reset */ + outb(0x02, 0x0cf9); + outb(0x06, 0x0cf9); +#endif +} + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#define CK804_NUM 1 +#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" +//set GPIO to input mode +#define CK804_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ + +#include "southbridge/nvidia/ck804/ck804_early_setup.c" + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/nvidia/ck804/ck804_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + + unsigned value; + uint32_t dword; + uint8_t byte; + + byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + + +} +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid() & 0xf; + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid +#else + nodeid = get_node_id(); +#endif + + enable_lapic(); +// init_timer(); + +#if CONFIG_LOGICAL_CPUS==1 + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + + } + + init_timer(); // only do it it first CPU + + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2892_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + start_other_cores(); +#endif + needs_reset |= ht_setup_chains_x(); + + needs_reset |= ck804_early_setup_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } + +#endif + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + /* We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("Use Ram as Stack now - done\r\n"); + } else + { + print_debug("Use Ram as Stack now - \r\n"); + } +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb index 09448facc..3bf850836 100644 --- a/src/mainboard/tyan/s2895/Config.lb +++ b/src/mainboard/tyan/s2895/Config.lb @@ -44,27 +44,46 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end + if CONFIG_USE_INIT + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" + end + else + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + end -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end +else + ## + ## Romcc output + ## + makerule ./failover.E + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## @@ -73,7 +92,16 @@ end mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -86,8 +114,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc +if USE_DCACHE_RAM +else + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -103,29 +134,49 @@ if USE_FALLBACK_IMAGE ldscript /southbridge/nvidia/ck804/romstrap.lds end + + +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc + ldscript /arch/i386/lib/failover.lds + if USE_DCACHE_RAM + else + mainboardinit ./failover.inc + end end -### -### O.k. We aren't just an intermediary anymore! -### - ## ## Setup RAM ## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end + +else + # ROMCC + mainboardinit cpu/x86/fpu/enable_fpu.inc + mainboardinit cpu/x86/mmx/enable_mmx.inc + mainboardinit cpu/x86/sse/enable_sse.inc + mainboardinit ./auto.inc + mainboardinit cpu/x86/sse/disable_sse.inc + mainboardinit cpu/x86/mmx/disable_mmx.inc + +end ## ## Include the secondary Configuration files diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index 22812e9a2..e2d220201 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -59,6 +59,11 @@ uses K8_E0_MEM_HOLE_SIZEK uses CK804_DEVN_BASE +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ## ROM_SIZE is the size of boot ROM that this board will use. #512K bytes default ROM_SIZE=524288 @@ -85,9 +90,9 @@ default HAVE_FALLBACK_BOOT=1 ## default HAVE_HARD_RESET=1 -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 +#default HARD_RESET_BUS=1 +#default HARD_RESET_DEVICE=4 +#default HARD_RESET_FUNCTION=0 ## ## Build code to export a programmable irq routing table @@ -136,6 +141,14 @@ default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 ## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + +## ## Build code to setup a generic IOAPIC ## default CONFIG_IOAPIC=1 @@ -143,8 +156,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s2895" +default MAINBOARD_PART_NUMBER="s2895" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2895 @@ -233,7 +246,7 @@ default TTYS0_LCS=0x3 ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=7 +default DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging default MAXIMUM_CONSOLE_LOGLEVEL=8 diff --git a/src/mainboard/tyan/s2895/cache_as_ram_auto.c b/src/mainboard/tyan/s2895/cache_as_ram_auto.c new file mode 100644 index 000000000..dfe11ae54 --- /dev/null +++ b/src/mainboard/tyan/s2895/cache_as_ram_auto.c @@ -0,0 +1,492 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/ck804_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* full reset */ + outb(0x0a, 0x0cf9); + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); +#if 1 + /* link reset */ + outb(0x02, 0x0cf9); + outb(0x06, 0x0cf9); +#endif +} + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) + +#define SUPERIO_GPIO_IO_BASE 0x400 + +static void sio_gpio_setup(void){ + + unsigned value; + + +#if 1 + /*Enable onboard scsi*/ + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1))); +#endif + +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#if 0 + #define ENABLE_APIC_EXT_ID 1 + #define APIC_ID_OFFSET 0x10 + #define LIFT_BSP_APIC_ID 0 +#else + #define ENABLE_APIC_EXT_ID 0 +#endif +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#define CK804_NUM 2 +//#define CK804B_BUSN 0x80 +#define CK804B_BUSN 0xc +#define CK804_USE_NIC 1 +#define CK804_USE_ACI 1 + +#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" + +//set GPIO to input mode +#define CK804_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ + +#include "southbridge/nvidia/ck804/ck804_early_setup.c" + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/nvidia/ck804/ck804_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + + +static void sio_setup(void) +{ + + unsigned value; + uint32_t dword; + uint8_t byte; + + + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); + + byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<29)|(1<<0); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + +#if 1 + lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); + + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); + value &= 0xbf; + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); +#endif + +} + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid() & 0xf; + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid + #if ENABLE_APIC_EXT_ID == 1 + if(id.coreid == 0) { + enable_apic_ext_id(id.nodeid); + } + #endif +#else + nodeid = get_node_id(); + #if ENABLE_APIC_EXT_ID == 1 + enable_apic_ext_id(nodeid); + #endif +#endif + + enable_lapic(); + + init_timer(); + + +#if CONFIG_LOGICAL_CPUS==1 + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if( id.nodeid != 0 ) //all except cores in node0 + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); + #endif + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if(nodeid != 0) + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 + + #endif + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + + + lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2895_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + start_other_cores(); +#endif + +#if CK804B_BUSN == 0x80 + // You need to preset bus num in PCI_DEV(0, 0x18,1) 0xe0, 0xe4, 0xe8, 0xec + needs_reset |= ht_setup_chains(3); +#else + // automatically set that for you, but you might meet tight space + // Bcause it has two Ck804, we need to set CK804B_BUSN to 0xc (ht_setup_chains_x will let second CK804 use that bus num. + // otherwise ck804_eary_setup can not work rightly. + needs_reset |= ht_setup_chains_x(); +#endif + + needs_reset |= ck804_early_setup_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } + +#endif + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + /* We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("Use Ram as Stack now - done\r\n"); + } else + { + print_debug("Use Ram as Stack now - \r\n"); + } +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_err("should not be here -\r\n"); +} diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb index 4cadb725c..42284e422 100644 --- a/src/mainboard/tyan/s4880/Options.lb +++ b/src/mainboard/tyan/s4880/Options.lb @@ -11,6 +11,7 @@ uses HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS +uses SERIAL_CPU_INIT uses CONFIG_IOAPIC uses CONFIG_SMP uses FALLBACK_SIZE @@ -56,6 +57,8 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses CONFIG_USE_INIT + ### ### Build options ### @@ -120,6 +123,9 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=4 default CONFIG_LOGICAL_CPUS=0 + +#default SERIAL_CPU_INIT=0 + #1G memory hole default K8_E0_MEM_HOLE_SIZEK=0x100000 @@ -135,8 +141,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s4880" +default MAINBOARD_PART_NUMBER="s4880" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4880 diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb index 67ee157f6..95ef0464f 100644 --- a/src/mainboard/tyan/s4882/Config.lb +++ b/src/mainboard/tyan/s4882/Config.lb @@ -16,6 +16,7 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -34,6 +35,7 @@ default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) arch i386 end + ## ## Build the objects we have code for in this directory. ## @@ -42,39 +44,61 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o +if USE_DCACHE_RAM -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end + if CONFIG_USE_INIT -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" + end -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end + else -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc -mainboardinit arch/i386/lib/jmp_auto_out.inc + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + end +else + + ## + ## Romcc output + ## + makerule ./failover.E + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + ## + ## Setup RAM + ## + mainboardinit cpu/x86/fpu/enable_fpu.inc + mainboardinit cpu/x86/mmx/enable_mmx.inc + mainboardinit cpu/x86/sse/enable_sse.inc + mainboardinit ./auto.inc + mainboardinit cpu/x86/sse/disable_sse.inc + mainboardinit cpu/x86/mmx/disable_mmx.inc + mainboardinit arch/i386/lib/jmp_auto_out.inc + +end ## ## Build our 16 bit and 32 bit linuxBIOS entry code @@ -82,7 +106,16 @@ mainboardinit arch/i386/lib/jmp_auto_out.inc mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + ## ## Build our reset vector (This is where linuxBIOS is entered) @@ -95,8 +128,11 @@ else ldscript /cpu/x86/32bit/reset32.lds end -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc +if USE_DCACHE_RAM +else + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc +end ## ## Include an id string (For safe flashing) @@ -104,27 +140,51 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds + +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc + end end -### -### O.k. We aren't just an intermediary anymore! -### +## +## Setup RAM +## +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end -mainboardinit arch/i386/lib/jmp_auto.inc +else + + # ROMCC + mainboardinit arch/i386/lib/jmp_auto.inc + +end ## ## Include the secondary Configuration files ## if CONFIG_CHIP_NAME - config chip.h + config chip.h end # sample config for tyan/s4882 diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb index e1a431bde..56a254822 100644 --- a/src/mainboard/tyan/s4882/Options.lb +++ b/src/mainboard/tyan/s4882/Options.lb @@ -11,7 +11,6 @@ uses HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS -uses SERIAL_CPU_INIT uses CONFIG_IOAPIC uses CONFIG_SMP uses FALLBACK_SIZE @@ -48,16 +47,21 @@ uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 uses HAVE_INIT_TIMER uses CONFIG_GDB_STUB +uses CONFIG_GDB_STUB uses CROSS_COMPILE uses CC uses HOSTCC uses OBJCOPY uses CONFIG_CHIP_NAME -uses CONFIG_CONSOLE_BTEXT uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_E0_MEM_HOLE_SIZEK +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + ### ### Build options ### @@ -85,7 +89,7 @@ default HAVE_HARD_RESET=1 ## ## Funky hard reset implementation ## -default HARD_RESET_BUS=1 +default HARD_RESET_BUS=3 default HARD_RESET_DEVICE=4 default HARD_RESET_FUNCTION=0 @@ -122,18 +126,25 @@ default CONFIG_MAX_CPUS=8 default CONFIG_MAX_PHYSICAL_CPUS=4 default CONFIG_LOGICAL_CPUS=1 -#default SERIAL_CPU_INIT=0 +#CHIP_NAME ? +default CONFIG_CHIP_NAME=1 #1G memory hole default K8_E0_MEM_HOLE_SIZEK=0x100000 -#BTEXT Console -#default CONFIG_CONSOLE_BTEXT=1 - #VGA Console default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=1 + ## ## Build code to setup a generic IOAPIC ## @@ -142,8 +153,8 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="Tyan" -default MAINBOARD_VENDOR="s4882" +default MAINBOARD_PART_NUMBER="s4882" +default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4882 @@ -232,9 +243,9 @@ default TTYS0_LCS=0x3 ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=7 +default DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=7 +default MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting diff --git a/src/mainboard/tyan/s4882/cache_as_ram_auto.c b/src/mainboard/tyan/s4882/cache_as_ram_auto.c new file mode 100644 index 000000000..4e1b8483f --- /dev/null +++ b/src/mainboard/tyan/s4882/cache_as_ram_auto.c @@ -0,0 +1,457 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include "northbridge/amd/amdk8/cpu_rev.c" +#define K8_HT_FREQ_1G_SUPPORT 0 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } +} +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_HUB 0x18 + int ret,i; + unsigned device=(ctrl->channel0[0])>>8; + i=2; + do { + ret = smbus_write_byte(SMBUS_HUB, 0x01, device); + } while ((ret!=0) && (i-->0)); + + smbus_write_byte(SMBUS_HUB, 0x03, 0); +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#if 0 + #define ENABLE_APIC_EXT_ID 1 + #define APIC_ID_OFFSET 0x10 + #define LIFT_BSP_APIC_ID 0 +#else + #define ENABLE_APIC_EXT_ID 0 +#endif +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif +#define FIRST_CPU 1 +#define SECOND_CPU 1 + +#define THIRD_CPU 1 +#define FOURTH_CPU 1 + +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU) + +#define RC0 ((1<<2)<<8) +#define RC1 ((1<<1)<<8) +#define RC2 ((1<<4)<<8) +#define RC3 ((1<<3)<<8) + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 + +#include "cpu/amd/car/copy_and_run.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void real_main(unsigned long bist); + +void amd64_main(unsigned long bist) +{ +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); + +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid(); + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the ck804 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + ); + cpu_reset: +#if 0 + //CPU reset will reset memtroller ??? + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + ); +#endif + + fallback_image: + real_main(bist); +} +void real_main(unsigned long bist) +#else +void amd64_main(unsigned long bist) +#endif +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 }, + .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { RC1|DIMM0, RC1|DIMM2 , 0, 0 }, + .channel1 = { RC1|DIMM1, RC1|DIMM3 , 0, 0 }, + + }, +#endif + +#if THIRD_CPU + { + .node_id = 2, + .f0 = PCI_DEV(0, 0x1a, 0), + .f1 = PCI_DEV(0, 0x1a, 1), + .f2 = PCI_DEV(0, 0x1a, 2), + .f3 = PCI_DEV(0, 0x1a, 3), + .channel0 = { RC2|DIMM0, RC2|DIMM2, 0, 0 }, + .channel1 = { RC2|DIMM1, RC2|DIMM3, 0, 0 }, + + }, +#endif +#if FOURTH_CPU + { + .node_id = 3, + .f0 = PCI_DEV(0, 0x1b, 0), + .f1 = PCI_DEV(0, 0x1b, 1), + .f2 = PCI_DEV(0, 0x1b, 2), + .f3 = PCI_DEV(0, 0x1b, 3), + .channel0 = { RC3|DIMM0, RC3|DIMM2, 0, 0 }, + .channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 }, + + }, +#endif + }; + + int needs_reset; + unsigned cpu_reset = 0; + + if (bist == 0) { +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Skip this if there was a built in self test failure */ +// amd_early_mtrr_init(); # don't need, already done in cache_as_ram + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + id = get_node_core_id_x(); // that is initid + #if ENABLE_APIC_EXT_ID == 1 + if(id.coreid == 0) { + enable_apic_ext_id(id.nodeid); + } + #endif +#else + nodeid = get_node_id(); + #if ENABLE_APIC_EXT_ID == 1 + enable_apic_ext_id(nodeid); + #endif +#endif + + enable_lapic(); + init_timer(); + + +#if CONFIG_LOGICAL_CPUS==1 + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if( id.nodeid != 0 ) //all except cores in node0 + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); + #endif + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(id.nodeid); + } +#else + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if(nodeid != 0) + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 + + #endif + if (cpu_init_detected(nodeid)) { + cpu_reset = 1; + goto cpu_reset_x; + } + distinguish_cpu_resets(nodeid); +#endif + + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + // We need stop the CACHE as RAM for this CPU too + #include "cpu/amd/car/cache_as_ram_post.c" + stop_this_cpu(); // it will stop all cores except core0 of cpu0 + } + } + + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s4882_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + start_other_cores(); +#endif + needs_reset |= ht_setup_chains_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + enable_smbus(); + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 1 + { + /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ + unsigned v_esp; + __asm__ volatile ( + "movl %%esp, %0\n\t" + : "=a" (v_esp) + ); +#if CONFIG_USE_INIT + printk_debug("v_esp=%08x\r\n", v_esp); +#else + print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); +#endif + } +#endif + + + +cpu_reset_x: + +#if CONFIG_USE_INIT + printk_debug("cpu_reset = %08x\r\n",cpu_reset); +#else + print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); +#endif + + if(cpu_reset == 0) { + print_debug("Clearing initial memory region: "); + } + print_debug("No cache as ram now - "); + + /* store cpu_reset to ebx */ + __asm__ volatile ( + "movl %0, %%ebx\n\t" + ::"a" (cpu_reset) + ); + + if(cpu_reset==0) { +#define CLEAR_FIRST_1M_RAM 1 +#include "cpu/amd/car/cache_as_ram_post.c" + } + else { +#undef CLEAR_FIRST_1M_RAM +#include "cpu/amd/car/cache_as_ram_post.c" + } + + __asm__ volatile ( + /* set new esp */ /* before _RAMBASE */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t" + ::"a"( _RAMBASE - 4 ) + ); + + { + unsigned new_cpu_reset; + + /* get back cpu_reset from ebx */ + __asm__ volatile ( + "movl %%ebx, %0\n\t" + :"=a" (new_cpu_reset) + ); + + print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/ + if(new_cpu_reset==0) { + print_debug("done\r\n"); + } else + { + print_debug("\r\n"); + } + +#if CONFIG_USE_INIT + printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); +#else + print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); +#endif + /*copy and execute linuxbios_ram */ + copy_and_run(new_cpu_reset); + /* We will not return */ + } + + + print_debug("should not be here -\r\n"); + +} diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c index ca7791cf6..d7be557d3 100644 --- a/src/northbridge/amd/amdk8/coherent_ht.c +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -107,9 +107,13 @@ typedef uint32_t u32; static inline void print_linkn (const char *strval, uint8_t byteval) { -#if 0 +#if 1 +#if CONFIG_USE_INIT + printk_debug("%s%02x\r\n", strval, byteval); +#else print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n"); #endif +#endif } static void disable_probes(void) @@ -1556,8 +1560,12 @@ static struct setup_smp_result setup_smp(void) result = setup_smp8(result.needs_reset); #endif +#if CONFIG_USE_INIT + printk_debug("%02x nodes initialized.\r\n", result.nodes); +#else print_debug_hex8(result.nodes); print_debug(" nodes initialized.\r\n"); +#endif return result; diff --git a/src/northbridge/amd/amdk8/debug.c b/src/northbridge/amd/amdk8/debug.c index eeba1e1e2..861ad8c38 100644 --- a/src/northbridge/amd/amdk8/debug.c +++ b/src/northbridge/amd/amdk8/debug.c @@ -35,21 +35,27 @@ static void dump_pci_device(unsigned dev) { int i; print_debug_pci_dev(dev); - print_debug("\r\n"); for(i = 0; i < 256; i++) { unsigned char val; if ((i & 0x0f) == 0) { +#if CONFIG_USE_INIT + printk_debug("\r\n%02x:",i); +#else + print_debug("\r\n"); print_debug_hex8(i); print_debug_char(':'); +#endif } val = pci_read_config8(dev, i); +#if CONFIG_USE_INIT + printk_debug(" %02x", val); +#else print_debug_char(' '); print_debug_hex8(val); - if ((i & 0x0f) == 0x0f) { - print_debug("\r\n"); - } +#endif } + print_debug("\r\n"); } static void dump_pci_devices(void) @@ -95,50 +101,74 @@ static void dump_spd_registers(const struct mem_controller *ctrl) device = ctrl->channel0[i]; if (device) { int j; +#if CONFIG_USE_INIT + printk_debug("dimm: %02x.0: %02x", i, device); +#else print_debug("dimm: "); print_debug_hex8(i); print_debug(".0: "); print_debug_hex8(device); +#endif for(j = 0; j < 128; j++) { int status; unsigned char byte; if ((j & 0xf) == 0) { +#if CONFIG_USE_INIT + printk_debug("\r\n%02x: ", j); +#else print_debug("\r\n"); print_debug_hex8(j); print_debug(": "); +#endif } status = smbus_read_byte(device, j); if (status < 0) { break; } byte = status & 0xff; +#if CONFIG_USE_INIT + printk_debug("%02x ", byte); +#else print_debug_hex8(byte); print_debug_char(' '); +#endif } print_debug("\r\n"); } device = ctrl->channel1[i]; if (device) { int j; +#if CONFIG_USE_INIT + printk_debug("dimm: %02x.1: %02x", i, device); +#else print_debug("dimm: "); print_debug_hex8(i); print_debug(".1: "); print_debug_hex8(device); +#endif for(j = 0; j < 128; j++) { int status; unsigned char byte; if ((j & 0xf) == 0) { +#if CONFIG_USE_INIT + printk_debug("\r\n%02x: ", j); +#else print_debug("\r\n"); print_debug_hex8(j); print_debug(": "); +#endif } status = smbus_read_byte(device, j); if (status < 0) { break; } byte = status & 0xff; +#if CONFIG_USE_INIT + printk_debug("%02x ", byte); +#else print_debug_hex8(byte); print_debug_char(' '); +#endif } print_debug("\r\n"); } @@ -151,8 +181,12 @@ static void dump_smbus_registers(void) for(device = 1; device < 0x80; device++) { int j; if( smbus_read_byte(device, 0) < 0 ) continue; +#if CONFIG_USE_INIT + printk_debug("smbus: %02x", device); +#else print_debug("smbus: "); print_debug_hex8(device); +#endif for(j = 0; j < 256; j++) { int status; unsigned char byte; @@ -161,13 +195,21 @@ static void dump_smbus_registers(void) break; } if ((j & 0xf) == 0) { +#if CONFIG_USE_INIT + printk_debug("\r\n%02x: ",j); +#else print_debug("\r\n"); print_debug_hex8(j); print_debug(": "); +#endif } byte = status & 0xff; +#if CONFIG_USE_INIT + printk_debug("%02x ", byte); +#else print_debug_hex8(byte); print_debug_char(' '); +#endif } print_debug("\r\n"); } @@ -178,21 +220,57 @@ static void dump_io_resources(unsigned port) int i; udelay(2000); +#if CONFIG_USE_INIT + printk_debug("%04x:\r\n", port); +#else print_debug_hex16(port); print_debug(":\r\n"); +#endif for(i=0;i<256;i++) { uint8_t val; if ((i & 0x0f) == 0) { +#if CONFIG_USE_INIT + printk_debug("%02x:", i); +#else print_debug_hex8(i); print_debug_char(':'); +#endif } val = inb(port); +#if CONFIG_USE_INIT + printk_debug(" %02x",val); +#else print_debug_char(' '); print_debug_hex8(val); +#endif if ((i & 0x0f) == 0x0f) { print_debug("\r\n"); } port++; } } + +static void dump_mem(unsigned start, unsigned end) +{ + unsigned i; + print_debug("dump_mem:"); + for(i=start;i<end;i++) { + if((i & 0xf)==0) { +#if CONFIG_USE_INIT + printk_debug("\r\n%08x:", i); +#else + print_debug("\r\n"); + print_debug_hex32(i); + print_debug(":"); +#endif + } +#if CONFIG_USE_INIT + printk_debug(" %02x", (unsigned char)*((unsigned char *)i)); +#else + print_debug(" "); + print_debug_hex8((unsigned char)*((unsigned char *)i)); +#endif + } + print_debug("\r\n"); + } #endif diff --git a/src/northbridge/amd/amdk8/incoherent_ht.c b/src/northbridge/amd/amdk8/incoherent_ht.c index ec767456e..7bb315d68 100644 --- a/src/northbridge/amd/amdk8/incoherent_ht.c +++ b/src/northbridge/amd/amdk8/incoherent_ht.c @@ -12,9 +12,13 @@ static inline void print_linkn_in (const char *strval, uint8_t byteval) { -#if 0 +#if 1 +#if CONFIG_USE_INIT + printk_debug("%s%02x\r\n", strval, byteval); +#else print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n"); #endif +#endif } static uint8_t ht_lookup_slave_capability(device_t dev) diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c index 3bdf8c3b1..e34c93d5c 100644 --- a/src/northbridge/amd/amdk8/raminit.c +++ b/src/northbridge/amd/amdk8/raminit.c @@ -31,10 +31,14 @@ static void setup_resource_map(const unsigned int *register_values, int max) unsigned where; unsigned long reg; #if 0 + #if CONFIG_USE_INIT + prink_debug("%08x <- %08x\r\n", register_values[i], register_values[i+2]); + #else print_debug_hex32(register_values[i]); print_debug(" <-"); print_debug_hex32(register_values[i+2]); print_debug("\r\n"); + #endif #endif dev = register_values[i] & ~0xff; where = register_values[i] & 0xff; @@ -538,10 +542,14 @@ static void sdram_set_registers(const struct mem_controller *ctrl) unsigned where; unsigned long reg; #if 0 + #if CONFIG_USE_INIT + prink_debug("%08x <- %08x\r\n", register_values[i], register_values[i+2]); + #else print_spew_hex32(register_values[i]); print_spew(" <-"); print_spew_hex32(register_values[i+2]); print_spew("\r\n"); + #endif #endif dev = (register_values[i] & ~0xff) - PCI_DEV(0, 0x18, 0) + ctrl->f0; where = register_values[i] & 0xff; @@ -1553,7 +1561,7 @@ static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller * /* Update DRAM Config High with our selected memory speed */ value = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); value &= ~(DCH_MEMCLK_MASK << DCH_MEMCLK_SHIFT); -#if 1 +#if 0 /* Improves DQS centering by correcting for case when core speed multiplier and MEMCLK speed result in odd clock divisor, by selecting the next lowest memory speed, required only at DDR400 and higher speeds with certain DIMM loadings ---- cheating???*/ if(!is_cpu_pre_e0()) { if(min_cycle_time==0x50) { @@ -2291,7 +2299,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) print_debug(" done\r\n"); } - //FIXME add enable node interleaving here --yhlu + //FIXME add enable node interleaving here -- yhlu /*needed? 1. check how many nodes we have , if not all has ram installed get out 2. check cs_base lo is 0, node 0 f2 0x40,,,,, if any one is not using lo is CS_BASE, get out @@ -2300,7 +2308,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) 5. for node interleaving we need to set mem hole to every node ( need recalcute hole offset in f0 for every node) */ - +#if CONFIG_DCACHE_RAM == 0 /* Make certain the first 1M of memory is intialized */ print_debug("Clearing initial memory region: "); @@ -2314,4 +2322,5 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) cache_lbmem(MTRR_TYPE_WRBACK); print_debug(" done\r\n"); +#endif } diff --git a/src/northbridge/amd/amdk8/setup_resource_map.c b/src/northbridge/amd/amdk8/setup_resource_map.c index 74bbfdf64..ebd1978a7 100644 --- a/src/northbridge/amd/amdk8/setup_resource_map.c +++ b/src/northbridge/amd/amdk8/setup_resource_map.c @@ -19,6 +19,10 @@ static void setup_resource_map_x(const unsigned int *register_values, int max) #endif for(i = 0; i < max; i += 4) { #if RES_DEBUG + #if CONFIG_USE_INIT + printk_debug("%04x: %02x %08x <- & %08x | %08x\r\n", + i/4, register_values[i],register_values[i+1], register_values[i+2], register_values[i+3]); + #else print_debug_hex16(i/4); print_debug(": "); print_debug_hex8(register_values[i]); @@ -29,6 +33,7 @@ static void setup_resource_map_x(const unsigned int *register_values, int max) print_debug(" | "); print_debug_hex32(register_values[i+3]); print_debug("\r\n"); + #endif #endif switch (register_values[i]) { case RES_PCI_IO: //PCI diff --git a/src/northbridge/intel/e7501/Config.lb b/src/northbridge/intel/e7501/Config.lb index bce7a0b56..59154f7ed 100644 --- a/src/northbridge/intel/e7501/Config.lb +++ b/src/northbridge/intel/e7501/Config.lb @@ -1,7 +1,3 @@ -uses CONFIG_CHIP_NAME - -if CONFIG_CHIP_NAME - config chip.h -end +config chip.h object northbridge.o diff --git a/src/northbridge/intel/e7501/debug.c b/src/northbridge/intel/e7501/debug.c index 67670f984..1c02ef720 100644 --- a/src/northbridge/intel/e7501/debug.c +++ b/src/northbridge/intel/e7501/debug.c @@ -17,7 +17,7 @@ static void print_pci_devices(void) { device_t dev; for(dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); + dev <= PCI_DEV(0xff, 0x1f, 0x7); dev += PCI_DEV(0,0,1)) { uint32_t id; id = pci_read_config32(dev, PCI_VENDOR_ID); @@ -35,28 +35,34 @@ static void dump_pci_device(unsigned dev) { int i; print_debug_pci_dev(dev); - print_debug("\r\n"); - for(i = 0; i <= 255; i++) { + for(i = 0; i < 256; i++) { unsigned char val; if ((i & 0x0f) == 0) { +#if CONFIG_USE_INIT + printk_debug("\r\n%02x:",i); +#else + print_debug("\r\n"); print_debug_hex8(i); print_debug_char(':'); +#endif } val = pci_read_config8(dev, i); +#if CONFIG_USE_INIT + printk_debug(" %02x", val); +#else print_debug_char(' '); print_debug_hex8(val); - if ((i & 0x0f) == 0x0f) { - print_debug("\r\n"); - } +#endif } + print_debug("\r\n"); } static void dump_pci_devices(void) { device_t dev; for(dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); + dev <= PCI_DEV(0xff, 0x1f, 0x7); dev += PCI_DEV(0,0,1)) { uint32_t id; id = pci_read_config32(dev, PCI_VENDOR_ID); @@ -69,6 +75,23 @@ static void dump_pci_devices(void) } } +static void dump_pci_devices_on_bus(unsigned busn) +{ + device_t dev; + for(dev = PCI_DEV(busn, 0, 0); + dev <= PCI_DEV(busn, 0x1f, 0x7); + dev += PCI_DEV(0,0,1)) { + uint32_t id; + id = pci_read_config32(dev, PCI_VENDOR_ID); + if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || + (((id >> 16) & 0xffff) == 0xffff) || + (((id >> 16) & 0xffff) == 0x0000)) { + continue; + } + dump_pci_device(dev); + } +} + static void dump_spd_registers(const struct mem_controller *ctrl) { int i; @@ -78,87 +101,175 @@ static void dump_spd_registers(const struct mem_controller *ctrl) device = ctrl->channel0[i]; if (device) { int j; +#if CONFIG_USE_INIT + printk_debug("dimm: %02x.0: %02x", i, device); +#else print_debug("dimm: "); print_debug_hex8(i); print_debug(".0: "); print_debug_hex8(device); - for(j = 0; j < 256; j++) { +#endif + for(j = 0; j < 128; j++) { int status; unsigned char byte; if ((j & 0xf) == 0) { +#if CONFIG_USE_INIT + printk_debug("\r\n%02x: ", j); +#else print_debug("\r\n"); print_debug_hex8(j); print_debug(": "); +#endif } status = smbus_read_byte(device, j); if (status < 0) { - print_debug("bad device\r\n"); break; } byte = status & 0xff; +#if CONFIG_USE_INIT + printk_debug("%02x ", byte); +#else print_debug_hex8(byte); print_debug_char(' '); +#endif } print_debug("\r\n"); } -#if 0 device = ctrl->channel1[i]; if (device) { int j; +#if CONFIG_USE_INIT + printk_debug("dimm: %02x.1: %02x", i, device); +#else` print_debug("dimm: "); print_debug_hex8(i); print_debug(".1: "); print_debug_hex8(device); - for(j = 0; j < 256; j++) { +#endif + for(j = 0; j < 128; j++) { int status; unsigned char byte; if ((j & 0xf) == 0) { +#if CONFIG_USE_INIT + printk_debug("\r\n%02x: ", j); +#else print_debug("\r\n"); print_debug_hex8(j); print_debug(": "); +#endif } status = smbus_read_byte(device, j); if (status < 0) { - print_debug("bad device\r\n"); break; } byte = status & 0xff; +#if CONFIG_USE_INIT + printk_debug("%02x ", byte); +#else print_debug_hex8(byte); print_debug_char(' '); +#endif } print_debug("\r\n"); } -#endif } } static void dump_smbus_registers(void) { - int i; + unsigned device; print_debug("\r\n"); - for(i = 1; i < 0x80; i++) { - unsigned device; - device = i; + for(device = 1; device < 0x80; device++) { int j; + if( smbus_read_byte(device, 0) < 0 ) continue; +#if CONFIG_USE_INIT + printk_debug("smbus: %02x", device); +#else print_debug("smbus: "); print_debug_hex8(device); +#endif for(j = 0; j < 256; j++) { int status; unsigned char byte; + status = smbus_read_byte(device, j); + if (status < 0) { + break; + } if ((j & 0xf) == 0) { +#if CONFIG_USE_INIT + printk_debug("\r\n%02x: ",j); +#else print_debug("\r\n"); print_debug_hex8(j); print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\r\n"); - break; +#endif } byte = status & 0xff; +#if CONFIG_USE_INIT + printk_debug("%02x ", byte); +#else print_debug_hex8(byte); print_debug_char(' '); +#endif } print_debug("\r\n"); } } + +static void dump_io_resources(unsigned port) +{ + + int i; +#if CONFIG_USE_INIT + printk_debug("%04x:\r\n", port); +#else + print_debug_hex16(port); + print_debug(":\r\n"); +#endif + for(i=0;i<256;i++) { + uint8_t val; + if ((i & 0x0f) == 0) { +#if CONFIG_USE_INIT + printk_debug("%02x:", i); +#else + print_debug_hex8(i); + print_debug_char(':'); +#endif + } + val = inb(port); +#if CONFIG_USE_INIT + printk_debug(" %02x",val); +#else + print_debug_char(' '); + print_debug_hex8(val); +#endif + if ((i & 0x0f) == 0x0f) { + print_debug("\r\n"); + } + port++; + } +} + +static void dump_mem(unsigned start, unsigned end) +{ + unsigned i; + print_debug("dump_mem:"); + for(i=start;i<end;i++) { + if((i & 0xf)==0) { +#if CONFIG_USE_INIT + printk_debug("\r\n%08x:", i); +#else + print_debug("\r\n"); + print_debug_hex32(i); + print_debug(":"); +#endif + } +#if CONFIG_USE_INIT + printk_debug(" %02x", (unsigned char)*((unsigned char *)i)); +#else + print_debug(" "); + print_debug_hex8((unsigned char)*((unsigned char *)i)); +#endif + } + print_debug("\r\n"); + } #endif diff --git a/src/northbridge/intel/e7501/northbridge.c b/src/northbridge/intel/e7501/northbridge.c index 800831de3..ff5763265 100644 --- a/src/northbridge/intel/e7501/northbridge.c +++ b/src/northbridge/intel/e7501/northbridge.c @@ -15,6 +15,7 @@ static void pci_domain_read_resources(device_t dev) /* Initialize the system wide io space constraints */ resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); + resource->base = 0x400; //yhlu resource->limit = 0xffffUL; resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; @@ -187,4 +188,5 @@ static void enable_dev(struct device *dev) struct chip_operations northbridge_intel_e7501_ops = { CHIP_NAME("Intel E7501 northbridge") + .enable_dev = enable_dev, }; diff --git a/src/northbridge/intel/e7501/raminit.c b/src/northbridge/intel/e7501/raminit.c index 020585a30..06cabe395 100644 --- a/src/northbridge/intel/e7501/raminit.c +++ b/src/northbridge/intel/e7501/raminit.c @@ -12,7 +12,7 @@ /* converted to C 6/2004 yhlu */ -#define DEBUG_RAM_CONFIG 1 +#define DEBUG_RAM_CONFIG 0 #define dumpnorth() dump_pci_device(PCI_DEV(0, 0, 0)) @@ -161,7 +161,7 @@ static const long register_values[] = { * 0x2e - 0x2f * [15:00] Subsystem ID */ - 0x2c, 0, (0x15d9 << 0) | (0x3580 << 16), +// 0x2c, 0, (0x15d9 << 0) | (0x3580 << 16), /* Undocumented * 0x80 - 0x80 @@ -185,6 +185,12 @@ static const long register_values[] = { #elif CAS_LATENCY == CAS_2_0 // 0x80, 0xfffffe00, 0x0d /* values for register 0x80 */ 0x80, 0xfffff000, 0x0bb1, /* values for register 0x80 */ +/* +000 = HI_A Stop Grant generated after 1 Stop Grant +001 = HI_A Stop Grant generated after 2 Stop Grant +010 = HI_A Stop Grant generated after 3 Stop Grant +011 = HI_A Stop Grant generated after 4 Stop Grant*/ + 0x50, 0xffff1fff, 0x00006000, #endif /* Enable periodic memory recalibration */ @@ -443,7 +449,7 @@ static const long register_values[] = { 0xe0, 0xffffffe2, (1<<4)|(1<<3)|(1<<2)|(0<<0), 0xd8, 0xffff9fff, 0x00000000, 0xf4, 0x3f8ffffd, 0x40300002, - 0x1050, 0xffffffcf, 0x00000030, + 0x1050, 0xffffffcf, 0x00000030, // d2f0 }; @@ -498,6 +504,23 @@ static void write_8dwords(uint32_t src_addr, uint32_t dst_addr) { #define SLOW_DOWN_IO udelay(40); #endif + /* Estimate that SLOW_DOWN_IO takes about 50&76us*/ + /* delay for 200us */ + +#if 1 +static void do_delay(void) +{ + int i; + for(i = 0; i < 16; i++) { SLOW_DOWN_IO } +} +#define DO_DELAY do_delay(); +#else +#define DO_DELAY \ + udelay(200); +#endif + +#define EXTRA_DELAY DO_DELAY + static void ram_set_rcomp_regs(const struct mem_controller *ctrl) { uint32_t dword; #if DEBUG_RAM_CONFIG @@ -563,7 +586,7 @@ static void ram_set_rcomp_regs(const struct mem_controller *ctrl) { } static void ram_set_d0f0_regs(const struct mem_controller *ctrl) { -#if DEBUG_RAM_CONFIG >= 2 +#if DEBUG_RAM_CONFIG dumpnorth(); #endif int i; @@ -571,7 +594,7 @@ static void ram_set_d0f0_regs(const struct mem_controller *ctrl) { max = sizeof(register_values)/sizeof(register_values[0]); for(i = 0; i < max; i += 3) { uint32_t reg; -#if DEBUG_RAM_CONFIG >= 2 +#if DEBUG_RAM_CONFIG print_debug_hex32(register_values[i]); print_debug(" <-"); print_debug_hex32(register_values[i+2]); @@ -584,7 +607,7 @@ static void ram_set_d0f0_regs(const struct mem_controller *ctrl) { } -#if DEBUG_RAM_CONFIG >= 2 +#if DEBUG_RAM_CONFIG dumpnorth(); #endif } @@ -875,7 +898,7 @@ static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_ /* Test to see if I have ecc sdram */ struct dimm_page_size sz; sz = sdram_spd_get_page_size(ctrl->channel0[i]); /* SDRAM type */ -#if DEBUG_RAM_CONFIG>=2 +#if DEBUG_RAM_CONFIG print_debug("page size ="); print_debug_hex32(sz.side1); print_debug(" "); @@ -954,6 +977,7 @@ static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_ return dimm_mask; } + #define spd_pre_init "Reading SPD data...\r\n" #define spd_pre_set "setting based on SPD data...\r\n" #define spd_post_init "done\r\n" @@ -992,17 +1016,17 @@ static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, lon /* Read the inititial state */ dword = pci_read_config32(ctrl->d0, 0x7c); -/* - // Test if ECC cmos option is enabled +#if 0 + /* Test if ECC cmos option is enabled */ movb $RTC_BOOT_BYTE, %al outb %al, $0x70 inb $0x71, %al testb $(1<<2), %al jnz 1f - // Clear the ecc enable + /* Clear the ecc enable */ andl $~(3 << 20), %esi 1: -*/ +#endif /* Walk through all dimms and find the interesection of the support @@ -1184,7 +1208,7 @@ static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mas /* After all of the arduous calculation setup with the fastest * cas latency I can use. */ - value = __builtin_bsf(dword); // bsrl = log2 how about bsfl? + value = log2f(dword); // bsrl = log2 how about bsfl? if(value ==0 ) return -1; ecx = value -1; @@ -1348,13 +1372,13 @@ static unsigned int spd_detect_dimms(const struct mem_controller *ctrl) unsigned dimm_mask; int i; dimm_mask = 0; -#if DEBUG_RAM_CONFIG +#if DEBUG_RAM_CONFIG print_debug("spd_detect_dimms:\r\n"); #endif for(i = 0; i < DIMM_SOCKETS; i++) { int byte; unsigned device; -#if DEBUG_RAM_CONFIG +#if DEBUG_RAM_CONFIG print_debug_hex32(i); print_debug("\r\n"); #endif @@ -1528,7 +1552,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) { #if DEBUG_RAM_CONFIG print_debug(spd_post_init); #endif - //moved from dram_post_init + DO_DELAY spd_set_ram_size(ctrl, dimm_mask); return; hw_spd_err: @@ -1539,24 +1563,6 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) { } -#if 0 -static void ram_postinit(const struct mem_controller *ctrl) { -#if DEBUG_RAM_CONFIG - dumpnorth(); -#endif - /* Include a test to verify that memory is more or less working o.k. - * This test is to catch programming errors and hardware that is out of - * spec, not a test to see if the memory dimms are working 100% - */ -//# CALL_LABEL(verify_ram) - spd_set_ram_size(ctrl); -} -#define FIRST_NORMAL_REFERENCE() CALL_LABEL(ram_postinit) - -#define SPECIAL_FINISHUP() CALL_LABEL(dram_finish) - -#endif - #define ecc_pre_init "Initializing ECC state...\r\n" #define ecc_post_init "ECC state initialized.\r\n" static void dram_finish(const struct mem_controller *ctrl) @@ -1569,7 +1575,7 @@ static void dram_finish(const struct mem_controller *ctrl) dword &=3; if(dword == 2) { -#if DEBUG_RAM_CONFIG +#if DEBUG_RAM_CONFIG print_debug(ecc_pre_init); #endif /* Initialize ECC bits , use ECC zero mode (new to 7501)*/ @@ -1581,7 +1587,7 @@ static void dram_finish(const struct mem_controller *ctrl) } while ( (byte & 0x08 ) == 0); pci_write_config8(ctrl->d0, 0x52, byte & 0xfc); -#if DEBUG_RAM_CONFIG +#if DEBUG_RAM_CONFIG print_debug(ecc_post_init); #endif @@ -1600,7 +1606,7 @@ static void dram_finish(const struct mem_controller *ctrl) pci_write_config32(ctrl->d0, 0x7c, dword); -#if DEBUG_RAM_CONFIG >= 2 +#if DEBUG_RAM_CONFIG dumpnorth(); #endif @@ -1621,23 +1627,6 @@ static void dram_finish(const struct mem_controller *ctrl) #define ram_enable_11 "Ram Enable 11\r\n" #endif - /* Estimate that SLOW_DOWN_IO takes about 50&76us*/ - /* delay for 200us */ - -#if 1 -static void do_delay(void) -{ - int i; - for(i = 0; i < 16; i++) { SLOW_DOWN_IO } -} -#define DO_DELAY do_delay(); -#else -#define DO_DELAY \ - udelay(200); -#endif - -#define EXTRA_DELAY DO_DELAY - static void sdram_enable(int controllers, const struct mem_controller *ctrl) { int i; @@ -1737,15 +1726,12 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) #endif RAM_NORMAL(ctrl); - - // special from v1 - //FIRST_NORMAL_REFERENCE(); - //spd_set_ram_size(ctrl, 0x03); - + EXTRA_DELAY /* Finally enable refresh */ ENABLE_REFRESH(ctrl); //SPECIAL_FINISHUP(); + EXTRA_DELAY dram_finish(ctrl); } diff --git a/src/pc80/Config.lb b/src/pc80/Config.lb index 5b395bd76..3f95bbc32 100644 --- a/src/pc80/Config.lb +++ b/src/pc80/Config.lb @@ -1,10 +1,15 @@ uses CONFIG_IDE +uses CONFIG_LEGACY_VGABIOS +uses CONFIG_CONSOLE_VGA object mc146818rtc.o object isa-dma.o object i8259.o #object udelay_timer2.o CONFIG_UDELAY_TIMER2 -#object beep.o CONFIG_BEEP + +#if CONFIG_CONSOLE_VGA +# object beep.o +#end if CONFIG_IDE dir ide diff --git a/src/pc80/serial.c b/src/pc80/serial.c index 89ac425c5..475c9bccf 100644 --- a/src/pc80/serial.c +++ b/src/pc80/serial.c @@ -23,6 +23,9 @@ #define UART_LCS TTYS0_LCS + +#if CONFIG_USE_INIT == 0 + /* Data */ #define UART_RBR 0x00 #define UART_TBR 0x00 @@ -48,14 +51,14 @@ static int uart_can_tx_byte(void) static void uart_wait_to_tx_byte(void) { - while(!uart_can_tx_byte()) - ; + while(!uart_can_tx_byte()) + ; } static void uart_wait_until_sent(void) { - while(!(inb(TTYS0_BASE + UART_LSR) & 0x40)) - ; + while(!(inb(TTYS0_BASE + UART_LSR) & 0x40)) + ; } static void uart_tx_byte(unsigned char data) @@ -88,3 +91,19 @@ static void uart_init(void) #endif outb(UART_LCS, TTYS0_BASE + UART_LCR); } +#else +extern void uart8250_init(unsigned base_port, unsigned divisor, unsigned lcs); +static void uart_init(void) +{ +#if USE_OPTION_TABLE == 1 + static const unsigned char divisor[] = { 1,2,3,6,12,24,48,96 }; + unsigned ttys0_div, ttys0_index; + ttys0_index = read_option(CMOS_VSTART_baud_rate, CMOS_VLEN_baud_rate, 0); + ttys0_index &= 7; + ttys0_div = divisor[ttys0_index]; + uart8250_init(TTYS0_BASE, ttys0_div, UART_LCS); +#else + uart8250_init(TTYS0_BASE, TTYS0_DIV, UART_LCS); +#endif +} +#endif diff --git a/src/sdram/generic_sdram.c b/src/sdram/generic_sdram.c index 9ec8122af..da1416695 100644 --- a/src/sdram/generic_sdram.c +++ b/src/sdram/generic_sdram.c @@ -12,17 +12,25 @@ void sdram_initialize(int controllers, const struct mem_controller *ctrl) int i; /* Set the registers we can set once to reasonable values */ for(i = 0; i < controllers; i++) { +#if CONFIG_USE_INIT + printk_debug("Ram1.%02x\r\n",i); +#else print_debug("Ram1."); print_debug_hex8(i); print_debug("\r\n"); +#endif sdram_set_registers(ctrl + i); } /* Now setup those things we can auto detect */ for(i = 0; i < controllers; i++) { +#if CONFIG_USE_INIT + printk_debug("Ram2.%02x\r\n",i); +#else print_debug("Ram2."); print_debug_hex8(i); print_debug("\r\n"); +#endif sdram_set_spd_registers(ctrl + i); } diff --git a/src/southbridge/intel/i82801er/i82801er_early_smbus.c b/src/southbridge/intel/i82801er/i82801er_early_smbus.c index ed014f1a8..d923f674a 100644 --- a/src/southbridge/intel/i82801er/i82801er_early_smbus.c +++ b/src/southbridge/intel/i82801er/i82801er_early_smbus.c @@ -46,6 +46,21 @@ static inline void smbus_delay(void) outb(0x80, 0x80); } +static int smbus_wait_until_active(void) +{ + unsigned long loops; + loops = SMBUS_TIMEOUT; + do { + unsigned char val; + smbus_delay(); + val = inb(SMBUS_IO_BASE + SMBHSTSTAT); + if ((val & 1)) { + break; + } + } while(--loops); + return loops?0:-4; +} + static int smbus_wait_until_ready(void) { unsigned long loops; @@ -113,6 +128,10 @@ static int smbus_read_byte(unsigned device, unsigned address) /* start a byte read, with interrupts disabled */ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), SMBUS_IO_BASE + SMBHSTCTL); + /* poll for it to start */ + if (smbus_wait_until_active() < 0) { + return -4; + } /* poll for transaction completion */ if (smbus_wait_until_done() < 0) { |