diff options
| author | Kévin Raymond <kraymond@avencall.com> | 2012-07-20 21:10:22 +0200 |
|---|---|---|
| committer | Kévin Raymond <kraymond@avencall.com> | 2012-07-20 21:10:22 +0200 |
| commit | c01b3adf743e144eef2bca5b005b8cb9ee706830 (patch) | |
| tree | b161cdb5a8c2cff4199c555d449cf07637d84254 /factory | |
| parent | a24985ce97b3f933b559587b038924c734ceab85 (diff) | |
ready for factory tests
Diffstat (limited to 'factory')
| -rw-r--r-- | factory/README | 26 | ||||
| -rw-r--r-- | factory/chan_dahdi.conf | 1459 | ||||
| -rw-r--r-- | factory/extensions.conf | 52 | ||||
| -rw-r--r-- | factory/sip.conf | 686 | ||||
| -rw-r--r-- | factory/system.conf | 33 |
5 files changed, 2256 insertions, 0 deletions
diff --git a/factory/README b/factory/README new file mode 100644 index 0000000..ceee8a0 --- /dev/null +++ b/factory/README @@ -0,0 +1,26 @@ +# TODO: +# - write the conf files and the script.. + +Objective +--------- + This will checks that all port are basically fonctioning. To be used at the + factory. + + You can run 2 tests + * testing FX[OS] ports + * testing ISDN ports + + Don't forget to test the other ports with an other method: + * Eth (×3) + * USB (×2) + * SATA (×2) + * RS232 (×2) + +Running the test +---------------- +#FIXME + + +<!-- vi:syntax=markdown tw=80 + --> + diff --git a/factory/chan_dahdi.conf b/factory/chan_dahdi.conf new file mode 100644 index 0000000..ef4e637 --- /dev/null +++ b/factory/chan_dahdi.conf @@ -0,0 +1,1459 @@ +; +; DAHDI Telephony Configuration file +; +; You need to restart Asterisk to re-configure the DAHDI channel +; CLI> module reload chan_dahdi.so +; will reload the configuration file, but not all configuration options +; are re-configured during a reload (signalling, as well as PRI and +; SS7-related settings cannot be changed on a reload). +; +; This file documents many configuration variables. Normally unless you know +; what a variable means or that it should be changed, there's no reason to +; un-comment those lines. +; +; Examples below that are commented out (those lines that begin with a ';' but +; no space afterwards) typically show a value that is not the default value, +; but would make sense under certain circumstances. The default values are +; usually sane. Thus you should typically not touch them unless you know what +; they mean or you know you should change them. + +[trunkgroups] +; +; Trunk groups are used for NFAS connections. +; +; Group: Defines a trunk group. +; trunkgroup => <trunkgroup>,<dchannel>[,<backup1>...] +; +; trunkgroup is the numerical trunk group to create +; dchannel is the DAHDI channel which will have the +; d-channel for the trunk. +; backup1 is an optional list of backup d-channels. +; +;trunkgroup => 1,24,48 +;trunkgroup => 1,24 +; +; Spanmap: Associates a span with a trunk group +; spanmap => <dahdispan>,<trunkgroup>[,<logicalspan>] +; +; dahdispan is the DAHDI span number to associate +; trunkgroup is the trunkgroup (specified above) for the mapping +; logicalspan is the logical span number within the trunk group to use. +; if unspecified, no logical span number is used. +; +;spanmap => 1,1,1 +;spanmap => 2,1,2 +;spanmap => 3,1,3 +;spanmap => 4,1,4 + +[channels] +; +; Default language +; +;language=en +; +; Context for calls. Defaults to 'default' +; +;context=incoming +; +; Switchtype: Only used for PRI. +; +; national: National ISDN 2 (default) +; dms100: Nortel DMS100 +; 4ess: AT&T 4ESS +; 5ess: Lucent 5ESS +; euroisdn: EuroISDN (common in Europe) +; ni1: Old National ISDN 1 +; qsig: Q.SIG +; +;switchtype=euroisdn +; +; MSNs for ISDN spans. Asterisk will listen for the listed numbers on +; incoming calls and ignore any calls not listed. +; Here you can give a comma separated list of numbers or dialplan extension +; patterns. An empty list disables MSN matching to allow any incoming call. +; Only set on PTMP CPE side of ISDN span if needed. +; The default is an empty list. +;msn= +; +; Some switches (AT&T especially) require network specific facility IE. +; Supported values are currently 'none', 'sdn', 'megacom', 'tollfreemegacom', 'accunet' +; +; nsf cannot be changed on a reload. +; +;nsf=none +; +;service_message_support=yes +; Enable service message support for channel. Must be set after switchtype. +; +; Dialing options for ISDN (i.e., Dial(DAHDI/g1/exten/options)): +; R Reverse Charge Indication +; Indicate to the called party that the call will be reverse charged. +; K(n) Keypad digits n +; Send out the specified digits as keypad digits. +; +; PRI Dialplan: The ISDN-level Type Of Number (TON) or numbering plan, used for +; the dialed number. For most installations, leaving this as 'unknown' (the +; default) works in the most cases. In some very unusual circumstances, you +; may need to set this to 'dynamic' or 'redundant'. Note that if you set one +; of the others, you will be unable to dial another class of numbers. For +; example, if you set 'national', you will be unable to dial local or +; international numbers. +; +; PRI Local Dialplan: Only RARELY used for PRI (sets the calling number's +; numbering plan). In North America, the typical use is sending the 10 digit +; callerID number and setting the prilocaldialplan to 'national' (the default). +; Only VERY rarely will you need to change this. +; +; Neither pridialplan nor prilocaldialplan can be changed on reload. +; +; unknown: Unknown +; private: Private ISDN +; local: Local ISDN +; national: National ISDN +; international: International ISDN +; dynamic: Dynamically selects the appropriate dialplan +; redundant: Same as dynamic, except that the underlying number is not +; changed (not common) +; +;pridialplan=unknown +;prilocaldialplan=national +; +; pridialplan may be also set at dialtime, by prefixing the dialled number with +; one of the following letters: +; U - Unknown +; I - International +; N - National +; L - Local (Net Specific) +; S - Subscriber +; V - Abbreviated +; R - Reserved (should probably never be used but is included for completeness) +; +; Additionally, you may also set the following NPI bits (also by prefixing the +; dialled string with one of the following letters): +; u - Unknown +; e - E.163/E.164 (ISDN/telephony) +; x - X.121 (Data) +; f - F.69 (Telex) +; n - National +; p - Private +; r - Reserved (should probably never be used but is included for completeness) +; +; You may also set the prilocaldialplan in the same way, but by prefixing the +; Caller*ID Number, rather than the dialled number. Please note that telcos +; which require this kind of additional manipulation of the TON/NPI are *rare*. +; Most telco PRIs will work fine simply by setting pridialplan to unknown or +; dynamic. +; +; +; PRI caller ID prefixes based on the given TON/NPI (dialplan) +; This is especially needed for EuroISDN E1-PRIs +; +; None of the prefix settings can be changed on reload. +; +; sample 1 for Germany +;internationalprefix = 00 +;nationalprefix = 0 +;localprefix = 0711 +;privateprefix = 07115678 +;unknownprefix = +; +; sample 2 for Germany +;internationalprefix = + +;nationalprefix = +49 +;localprefix = +49711 +;privateprefix = +497115678 +;unknownprefix = +; +; PRI resetinterval: sets the time in seconds between restart of unused +; B channels; defaults to 'never'. +; +;resetinterval = 3600 +; +; Overlap dialing mode (sending overlap digits) +; Cannot be changed on a reload. +; +; incoming: incoming direction only +; outgoing: outgoing direction only +; no: neither direction +; yes or both: both directions +; +;overlapdial=yes +; +; Allow inband audio (progress) when a call is DISCONNECTed by the far end of a PRI +; +;inbanddisconnect=yes +; +; Allow a held call to be transferred to the active call on disconnect. +; This is useful on BRI PTMP NT lines where an ISDN phone can simulate the +; transfer feature of an analog phone. +; The default is no. +;hold_disconnect_transfer=yes +; +; PRI Out of band indications. +; Enable this to report Busy and Congestion on a PRI using out-of-band +; notification. Inband indication, as used by Asterisk doesn't seem to work +; with all telcos. +; +; outofband: Signal Busy/Congestion out of band with RELEASE/DISCONNECT +; inband: Signal Busy/Congestion using in-band tones (default) +; +; priindication cannot be changed on a reload. +; +;priindication = outofband +; +; If you need to override the existing channels selection routine and force all +; PRI channels to be marked as exclusively selected, set this to yes. +; +; priexclusive cannot be changed on a reload. +; +;priexclusive = yes +; +; +; If you need to use the logical channel mapping with your Q.SIG PRI instead +; of the physical mapping you must use the qsigchannelmapping option. +; +; logical: Use the logical channel mapping +; physical: Use physical channel mapping (default) +; +;qsigchannelmapping=logical +; +; If you wish to ignore remote hold indications (and use MOH that is supplied over +; the B channel) enable this option. +; +;discardremoteholdretrieval=yes +; +; ISDN Timers +; All of the ISDN timers and counters that are used are configurable. Specify +; the timer name, and its value (in ms for timers). +; K: Layer 2 max number of outstanding unacknowledged I frames (default 7) +; N200: Layer 2 max number of retransmissions of a frame (default 3) +; T200: Layer 2 max time before retransmission of a frame (default 1000 ms) +; T203: Layer 2 max time without frames being exchanged (default 10000 ms) +; T305: Wait for DISCONNECT acknowledge (default 30000 ms) +; T308: Wait for RELEASE acknowledge (default 4000 ms) +; T309: Maintain active calls on Layer 2 disconnection (default -1, +; Asterisk clears calls) +; EuroISDN: 6000 to 12000 ms, according to (N200 + 1) x T200 + 2s +; May vary in other ISDN standards (Q.931 1993 : 90000 ms) +; T313: Wait for CONNECT acknowledge, CPE side only (default 3000 ms) +; +; T-RESPONSE: Maximum time to wait for a typical APDU response. (default 4000 ms) +; This is an implementation timer when the standard does not specify one. +; T-ACTIVATE: Request supervision timeout. (default 10000 ms) +; T-RETENTION: Maximum time to wait for user A to activate call-completion. (default 30000 ms) +; Used by ETSI PTP, ETSI PTMP, and Q.SIG as the cc_offer_timer. +; T-CCBS1: T-STATUS timer equivalent for CC user A status. (default 4000 ms) +; T-CCBS2: Maximum time the CCBS service will be active (default 45 min in ms) +; T-CCBS3: Maximum time to wait for user A to respond to user B availability. (default 20000 ms) +; T-CCBS5: Network B CCBS supervision timeout. (default 60 min in ms) +; T-CCBS6: Network A CCBS supervision timeout. (default 60 min in ms) +; T-CCNR2: Maximum time the CCNR service will be active (default 180 min in ms) +; T-CCNR5: Network B CCNR supervision timeout. (default 195 min in ms) +; T-CCNR6: Network A CCNR supervision timeout. (default 195 min in ms) +; CC-T1: Q.SIG CC request supervision timeout. (default 30000 ms) +; CCBS-T2: Q.SIG CCBS supervision timeout. (default 60 min in ms) +; CCNR-T2: Q.SIG CCNR supervision timeout. (default 195 min in ms) +; CC-T3: Q.SIG CC Maximum time to wait for user A to respond to user B availability. (default 30000 ms) +; +;pritimer => t200,1000 +;pritimer => t313,4000 +; +; CC PTMP recall mode: +; specific - Only the CC original party A can participate in the CC callback +; global - Other compatible endpoints on the PTMP line can be party A in the CC callback +; +; cc_ptmp_recall_mode cannot be changed on a reload. +; +;cc_ptmp_recall_mode = specific +; +; CC Q.SIG Party A (requester) retain signaling link option +; retain Require that the signaling link be retained. +; release Request that the signaling link be released. +; do_not_care The responder is free to choose if the signaling link will be retained. +; +;cc_qsig_signaling_link_req = retain +; +; CC Q.SIG Party B (responder) retain signaling link option +; retain Prefer that the signaling link be retained. +; release Prefer that the signaling link be released. +; +;cc_qsig_signaling_link_rsp = retain +; +; See ccss.conf.sample for more options. The timers described by ccss.conf.sample +; are not used by ISDN for the native protocol since they are defined by the +; standards and set by pritimer above. +; +; To enable transmission of facility-based ISDN supplementary services (such +; as caller name from CPE over facility), enable this option. +; Cannot be changed on a reload. +; +;facilityenable = yes +; + +; This option enables Advice of Charge pass-through between the ISDN PRI and +; Asterisk. This option can be set to any combination of 's', 'd', and 'e' which +; represent the different variants of Advice of Charge, AOC-S, AOC-D, and AOC-E. +; Advice of Charge pass-through is currently only supported for ETSI. Since most +; AOC messages are sent on facility messages, the 'facilityenable' option must +; also be enabled to fully support AOC pass-through. +; +;aoc_enable=s,d,e +; +; When this option is enabled, a hangup initiated by the ISDN PRI side of the +; asterisk channel will result in the channel delaying its hangup in an +; attempt to receive the final AOC-E message from its bridge. The delay +; period is configured as one half the T305 timer length. If the channel +; is not bridged the hangup will occur immediatly without delay. +; +;aoce_delayhangup=yes + +; pritimer cannot be changed on a reload. +; +; Signalling method. The default is "auto". Valid values: +; auto: Use the current value from DAHDI. +; em: E & M +; em_e1: E & M E1 +; em_w: E & M Wink +; featd: Feature Group D (The fake, Adtran style, DTMF) +; featdmf: Feature Group D (The real thing, MF (domestic, US)) +; featdmf_ta: Feature Group D (The real thing, MF (domestic, US)) through +; a Tandem Access point +; featb: Feature Group B (MF (domestic, US)) +; fgccama: Feature Group C-CAMA (DP DNIS, MF ANI) +; fgccamamf: Feature Group C-CAMA MF (MF DNIS, MF ANI) +; fxs_ls: FXS (Loop Start) +; fxs_gs: FXS (Ground Start) +; fxs_ks: FXS (Kewl Start) +; fxo_ls: FXO (Loop Start) +; fxo_gs: FXO (Ground Start) +; fxo_ks: FXO (Kewl Start) +; pri_cpe: PRI signalling, CPE side +; pri_net: PRI signalling, Network side +; bri_cpe: BRI PTP signalling, CPE side +; bri_net: BRI PTP signalling, Network side +; bri_cpe_ptmp: BRI PTMP signalling, CPE side +; bri_net_ptmp: BRI PTMP signalling, Network side +; sf: SF (Inband Tone) Signalling +; sf_w: SF Wink +; sf_featd: SF Feature Group D (The fake, Adtran style, DTMF) +; sf_featdmf: SF Feature Group D (The real thing, MF (domestic, US)) +; sf_featb: SF Feature Group B (MF (domestic, US)) +; e911: E911 (MF) style signalling +; ss7: Signalling System 7 +; mfcr2: MFC/R2 Signalling. To specify the country variant see 'mfcr2_variant' +; +; The following are used for Radio interfaces: +; fxs_rx: Receive audio/COR on an FXS kewlstart interface (FXO at the +; channel bank) +; fxs_tx: Transmit audio/PTT on an FXS loopstart interface (FXO at the +; channel bank) +; fxo_rx: Receive audio/COR on an FXO loopstart interface (FXS at the +; channel bank) +; fxo_tx: Transmit audio/PTT on an FXO groundstart interface (FXS at +; the channel bank) +; em_rx: Receive audio/COR on an E&M interface (1-way) +; em_tx: Transmit audio/PTT on an E&M interface (1-way) +; em_txrx: Receive audio/COR AND Transmit audio/PTT on an E&M interface +; (2-way) +; em_rxtx: Same as em_txrx (for our dyslexic friends) +; sf_rx: Receive audio/COR on an SF interface (1-way) +; sf_tx: Transmit audio/PTT on an SF interface (1-way) +; sf_txrx: Receive audio/COR AND Transmit audio/PTT on an SF interface +; (2-way) +; sf_rxtx: Same as sf_txrx (for our dyslexic friends) +; ss7: Signalling System 7 +; +; signalling of a channel can not be changed on a reload. +; +;signalling=fxo_ls +; +; If you have an outbound signalling format that is different from format +; specified above (but compatible), you can specify outbound signalling format, +; (see below). The 'signalling' format specified will be the inbound signalling +; format. If you only specify 'signalling', then it will be the format for +; both inbound and outbound. +; +; outsignalling can only be one of: +; em, em_e1, em_w, sf, sf_w, sf_featd, sf_featdmf, sf_featb, featd, +; featdmf, featdmf_ta, e911, fgccama, fgccamamf +; +; outsignalling cannot be changed on a reload. +; +;signalling=featdmf +; +;outsignalling=featb +; +; For Feature Group D Tandem access, to set the default CIC and OZZ use these +; parameters (Will not be updated on reload): +; +;defaultozz=0000 +;defaultcic=303 +; +; A variety of timing parameters can be specified as well +; The default values for those are "-1", which is to use the +; compile-time defaults of the DAHDI kernel modules. The timing +; parameters, (with the standard default from DAHDI): +; +; prewink: Pre-wink time (default 50ms) +; preflash: Pre-flash time (default 50ms) +; wink: Wink time (default 150ms) +; flash: Flash time (default 750ms) +; start: Start time (default 1500ms) +; rxwink: Receiver wink time (default 300ms) +; rxflash: Receiver flashtime (default 1250ms) +; debounce: Debounce timing (default 600ms) +; +; None of them will update on a reload. +; +; How long generated tones (DTMF and MF) will be played on the channel +; (in milliseconds). +; +; This is a global, rather than a per-channel setting. It will not be +; updated on a reload. +; +;toneduration=100 +; +; Whether or not to do distinctive ring detection on FXO lines: +; +;usedistinctiveringdetection=yes +; +; enable dring detection after caller ID for those countries like Australia +; where the ring cadence is changed *after* the caller ID spill: +; +;distinctiveringaftercid=yes +; +; Whether or not to use caller ID: +; +usecallerid=yes +; +; Type of caller ID signalling in use +; bell = bell202 as used in US (default) +; v23 = v23 as used in the UK +; v23_jp = v23 as used in Japan +; dtmf = DTMF as used in Denmark, Sweden and Netherlands +; smdi = Use SMDI for caller ID. Requires SMDI to be enabled (usesmdi). +; +;cidsignalling=v23 +; +; What signals the start of caller ID +; ring = a ring signals the start (default) +; polarity = polarity reversal signals the start +; polarity_IN = polarity reversal signals the start, for India, +; for dtmf dialtone detection; using DTMF. +; (see doc/India-CID.txt) +; dtmf = causes monitor loop to look for dtmf energy on the +; incoming channel to initate cid acquisition +; +;cidstart=polarity +; +; When cidstart=dtmf, the energy level on the line used to trigger dtmf cid +; acquisition. This number is compared to the average over a packet of audio +; of the absolute values of 16 bit signed linear samples. The default is set +; to 256. The choice of 256 is arbitrary. The value you should select should +; be high enough to prevent false detections while low enough to insure that +; no dtmf spills are missed. +; +;dtmfcidlevel=256 +; +; Whether or not to hide outgoing caller ID (Override with *67 or *82) +; (If your dialplan doesn't catch it) +; +;hidecallerid=yes +; +; Enable if you need to hide just the name and not the number for legacy PBX use. +; Only applies to PRI channels. +;hidecalleridname=yes +; +; On UK analog lines, the caller hanging up determines the end of calls. So +; Asterisk hanging up the line may or may not end a call (DAHDI could just as +; easily be re-attaching to a prior incoming call that was not yet hung up). +; This option changes the hangup to wait for a dialtone on the line, before +; marking the line as once again available for use with outgoing calls. +;waitfordialtone=yes +; +; The following option enables receiving MWI on FXO lines. The default +; value is no. +; The mwimonitor can take the following values +; no - No mwimonitoring occurs. (default) +; yes - The same as specifying fsk +; fsk - the FXO line is monitored for MWI FSK spills +; fsk,rpas - the FXO line is monitored for MWI FSK spills preceded +; by a ring pulse alert signal. +; neon - The fxo line is monitored for the presence of NEON pulses +; indicating MWI. +; When detected, an internal Asterisk MWI event is generated so that any other +; part of Asterisk that cares about MWI state changes is notified, just as if +; the state change came from app_voicemail. +; For FSK MWI Spills, the energy level that must be seen before starting the +; MWI detection process can be set with 'mwilevel'. +; +;mwimonitor=no +;mwilevel=512 +; +; This option is used in conjunction with mwimonitor. This will get executed +; when incoming MWI state changes. The script is passed 2 arguments. The +; first is the corresponding mailbox, and the second is 1 or 0, indicating if +; there are messages waiting or not. +; +;mwimonitornotify=/usr/local/bin/dahdinotify.sh +; +; The following keyword 'mwisendtype' enables various VMWI methods on FXS lines (if supported). +; The default is to send FSK only. +; The following options are available; +; 'rpas' Ring Pulse Alert Signal, alerts intelligent phones that a FSK message is about to be sent. +; 'lrev' Line reversed to indicate messages waiting. +; 'hvdc' 90Vdc OnHook DC voltage to indicate messages waiting. +; 'hvac' or 'neon' 90Vac OnHook AC voltage to light Neon bulb. +; 'nofsk' Disables FSK MWI spills from being sent out. +; It is feasible that multiple options can be enabled. +;mwisendtype=rpas,lrev +; +; Whether or not to enable call waiting on internal extensions +; With this set to 'yes', busy extensions will hear the call-waiting +; tone, and can use hook-flash to switch between callers. The Dial() +; app will not return the "BUSY" result for extensions. +; +callwaiting=yes +; +; Configure the number of outstanding call waiting calls for internal ISDN +; endpoints before bouncing the calls as busy. This option is equivalent to +; the callwaiting option for analog ports. +; A call waiting call is a SETUP message with no B channel selected. +; The default is zero to disable call waiting for ISDN endpoints. +;max_call_waiting_calls=0 +; +; Allow incoming ISDN call waiting calls. +; A call waiting call is a SETUP message with no B channel selected. +;allow_call_waiting_calls=no +; +; Configure the ISDN span to indicate MWI for the list of mailboxes. +; You can give a comma separated list of up to 8 mailboxes per span. +; An empty list disables MWI. +; The default is an empty list. +;mwi_mailboxes=mailbox_number[@context]{,mailbox_number[@context]} +; +; Whether or not restrict outgoing caller ID (will be sent as ANI only, not +; available for the user) +; Mostly use with FXS ports +; Does nothing. Use hidecallerid instead. +; +;restrictcid=no +; +; Whether or not to use the caller ID presentation from the Asterisk channel +; for outgoing calls. +; See dialplan function CALLERID(pres) for more information. +; Only applies to PRI and SS7 channels. +; +usecallingpres=yes +; +; Some countries (UK) have ring tones with different ring tones (ring-ring), +; which means the caller ID needs to be set later on, and not just after +; the first ring, as per the default (1). +; +;sendcalleridafter = 2 +; +; +; Support caller ID on Call Waiting +; +callwaitingcallerid=yes +; +; Support three-way calling +; +threewaycalling=yes +; +; For FXS ports (either direct analog or over T1/E1): +; Support flash-hook call transfer (requires three way calling) +; Also enables call parking (overrides the 'canpark' parameter) +; +; For digital ports using ISDN PRI protocols: +; Support switch-side transfer (called 2BCT, RLT or other names) +; This setting must be enabled on both ports involved, and the +; 'facilityenable' setting must also be enabled to allow sending +; the transfer to the ISDN switch, since it sent in a FACILITY +; message. +; NOTE: This should be disabled for NT PTMP mode. Phones cannot +; have tromboned calls pushed down to them. +; +transfer=yes +; +; Allow call parking +; ('canpark=no' is overridden by 'transfer=yes') +; +canpark=yes +; +; Support call forward variable +; +cancallforward=yes +; +; Whether or not to support Call Return (*69, if your dialplan doesn't +; catch this first) +; +callreturn=yes +; +; Stutter dialtone support: If a mailbox is specified without a voicemail +; context, then when voicemail is received in a mailbox in the default +; voicemail context in voicemail.conf, taking the phone off hook will cause a +; stutter dialtone instead of a normal one. +; +; If a mailbox is specified *with* a voicemail context, the same will result +; if voicemail received in mailbox in the specified voicemail context. +; +; for default voicemail context, the example below is fine: +; +;mailbox=1234 +; +; for any other voicemail context, the following will produce the stutter tone: +; +;mailbox=1234@context +; +; Enable echo cancellation +; Use either "yes", "no", or a power of two from 32 to 256 if you wish to +; actually set the number of taps of cancellation. +; +; Note that when setting the number of taps, the number 256 does not translate +; to 256 ms of echo cancellation. echocancel=256 means 256 / 8 = 32 ms. +; +; Note that if any of your DAHDI cards have hardware echo cancellers, +; then this setting only turns them on and off; numeric settings will +; be treated as "yes". There are no special settings required for +; hardware echo cancellers; when present and enabled in their kernel +; modules, they take precedence over the software echo canceller compiled +; into DAHDI automatically. +; +; +echocancel=yes +; +; Some DAHDI echo cancellers (software and hardware) support adjustable +; parameters; these parameters can be supplied as additional options to +; the 'echocancel' setting. Note that Asterisk does not attempt to +; validate the parameters or their values, so if you supply an invalid +; parameter you will not know the specific reason it failed without +; checking the kernel message log for the error(s) put there by DAHDI. +; +;echocancel=128,param1=32,param2=0,param3=14 +; +; Generally, it is not necessary (and in fact undesirable) to echo cancel when +; the circuit path is entirely TDM. You may, however, change this behavior +; by enabling the echo canceller during pure TDM bridging below. +; +echocancelwhenbridged=yes +; +; In some cases, the echo canceller doesn't train quickly enough and there +; is echo at the beginning of the call. Enabling echo training will cause +; DAHDI to briefly mute the channel, send an impulse, and use the impulse +; response to pre-train the echo canceller so it can start out with a much +; closer idea of the actual echo. Value may be "yes", "no", or a number of +; milliseconds to delay before training (default = 400) +; +; WARNING: In some cases this option can make echo worse! If you are +; trying to debug an echo problem, it is worth checking to see if your echo +; is better with the option set to yes or no. Use whatever setting gives +; the best results. +; +; Note that these parameters do not apply to hardware echo cancellers. +; +;echotraining=yes +;echotraining=800 +; +; If you are having trouble with DTMF detection, you can relax the DTMF +; detection parameters. Relaxing them may make the DTMF detector more likely +; to have "talkoff" where DTMF is detected when it shouldn't be. +; +;relaxdtmf=yes +; +; You may also set the default receive and transmit gains (in dB) +; +; Gain Settings: increasing / decreasing the volume level on a channel. +; The values are in db (decibells). A positive number +; increases the volume level on a channel, and a +; negavive value decreases volume level. +; +; Dynamic Range Compression: you can also enable dynamic range compression +; on a channel. This will amplify quiet sounds while leaving +; louder sounds untouched. This is useful in situations where +; a linear gain setting would cause clipping. Acceptable values +; are in the range of 0.0 to around 6.0 with higher values +; causing more compression to be done. +; +; There are several independent gain settings: +; rxgain: gain for the rx (receive - into Asterisk) channel. Default: 0.0 +; txgain: gain for the tx (transmit - out of Asterisk Asterisk) channel. +; Default: 0.0 +; cid_rxgain: set the gain just for the caller ID sounds Asterisk +; emits. Default: 5.0 . +; rxdrc: dynamic range compression for the rx channel. Default: 0.0 +; txdrc: dynamic range compression for the tx channel. Default: 0.0 + +;rxgain=2.0 +;txgain=3.0 +; +;rxdrc=1.0 +;txdrc=4.0 +; +; Logical groups can be assigned to allow outgoing roll-over. Groups range +; from 0 to 63, and multiple groups can be specified. By default the +; channel is not a member of any group. +; +; Note that an explicit empty value for 'group' is invalid, and will not +; override a previous non-empty one. The same applies to callgroup and +; pickupgroup as well. +; +group=1 +; +; Ring groups (a.k.a. call groups) and pickup groups. If a phone is ringing +; and it is a member of a group which is one of your pickup groups, then +; you can answer it by picking up and dialing *8#. For simple offices, just +; make these both the same. Groups range from 0 to 63. +; +callgroup=1 +pickupgroup=1 + +; Channel variable to be set for all calls from this channel +;setvar=CHANNEL=42 +;setvar=ATTENDED_TRANSFER_COMPLETE_SOUND=beep ; This channel variable will + ; cause the given audio file to + ; be played upon completion of + ; an attended transfer. + +; +; Specify whether the channel should be answered immediately or if the simple +; switch should provide dialtone, read digits, etc. +; Note: If immediate=yes the dialplan execution will always start at extension +; 's' priority 1 regardless of the dialed number! +; +;immediate=yes +; +; Specify whether flash-hook transfers to 'busy' channels should complete or +; return to the caller performing the transfer (default is yes). +; +;transfertobusy=no + +; Calls will have the party id user tag set to this string value. +; +;cid_tag= + +; With this set, you can automatically append the MSN of a party +; to the cid_tag. An '_' is used to separate the tag from the MSN. +; Applies to ISDN spans. +; Default is no. +; +; Table of what number is appended: +; outgoing incoming +; net dialed caller +; cpe caller dialed +; +;append_msn_to_cid_tag=no + +; caller ID can be set to "asreceived" or a specific number if you want to +; override it. Note that "asreceived" only applies to trunk interfaces. +; fullname sets just the +; +; fullname: sets just the name part. +; cid_number: sets just the number part: +; +;callerid = 123456 +; +;callerid = My Name <2564286000> +; Which can also be written as: +;cid_number = 2564286000 +;fullname = My Name +; +;callerid = asreceived +; +; should we use the caller ID from incoming call on DAHDI transfer? +; +;useincomingcalleridondahditransfer = yes +; +; AMA flags affects the recording of Call Detail Records. If specified +; it may be 'default', 'omit', 'billing', or 'documentation'. +; +;amaflags=default +; +; Channels may be associated with an account code to ease +; billing +; +;accountcode=lss0101 +; +; ADSI (Analog Display Services Interface) can be enabled on a per-channel +; basis if you have (or may have) ADSI compatible CPE equipment +; +;adsi=yes +; +; SMDI (Simplified Message Desk Interface) can be enabled on a per-channel +; basis if you would like that channel to behave like an SMDI message desk. +; The SMDI port specified should have already been defined in smdi.conf. The +; default port is /dev/ttyS0. +; +;usesmdi=yes +;smdiport=/dev/ttyS0 +; +; On trunk interfaces (FXS) and E&M interfaces (E&M, Wink, Feature Group D +; etc, it can be useful to perform busy detection either in an effort to +; detect hangup or for detecting busies. This enables listening for +; the beep-beep busy pattern. +; +;busydetect=yes +; +; If busydetect is enabled, it is also possible to specify how many busy tones +; to wait for before hanging up. The default is 3, but it might be +; safer to set to 6 or even 8. Mind that the higher the number, the more +; time that will be needed to hangup a channel, but lowers the probability +; that you will get random hangups. +; +;busycount=6 +; +; If busydetect is enabled, it is also possible to specify the cadence of your +; busy signal. In many countries, it is 500msec on, 500msec off. Without +; busypattern specified, we'll accept any regular sound-silence pattern that +; repeats <busycount> times as a busy signal. If you specify busypattern, +; then we'll further check the length of the sound (tone) and silence, which +; will further reduce the chance of a false positive. +; +;busypattern=500,500 +; +; NOTE: In make menuselect, you'll find further options to tweak the busy +; detector. If your country has a busy tone with the same length tone and +; silence (as many countries do), consider enabling the +; BUSYDETECT_COMPARE_TONE_AND_SILENCE option. +; +; To further detect which hangup tone your telco provider is sending, it is +; useful to use the ztmonitor utility to record the audio that main/dsp.c +; is receiving after the caller hangs up. +; +; For FXS (FXO signalled) ports +; switch the line polarity to signal the connected PBX that an outgoing +; call was answered by the remote party. +; For FXO (FXS signalled) ports +; watch for a polarity reversal to mark when a outgoing call is +; answered by the remote party. +; +;answeronpolarityswitch=yes +; +; For FXS (FXO signalled) ports +; switch the line polarity to signal the connected PBX that the current +; call was "hung up" by the remote party +; For FXO (FXS signalled) ports +; In some countries, a polarity reversal is used to signal the disconnect of a +; phone line. If the hanguponpolarityswitch option is selected, the call will +; be considered "hung up" on a polarity reversal. +; +;hanguponpolarityswitch=yes +; +; polarityonanswerdelay: minimal time period (ms) between the answer +; polarity switch and hangup polarity switch. +; (default: 600ms) +; +; On trunk interfaces (FXS) it can be useful to attempt to follow the progress +; of a call through RINGING, BUSY, and ANSWERING. If turned on, call +; progress attempts to determine answer, busy, and ringing on phone lines. +; This feature is HIGHLY EXPERIMENTAL and can easily detect false answers, +; so don't count on it being very accurate. +; +; Few zones are supported at the time of this writing, but may be selected +; with "progzone". +; +; progzone also affects the pattern used for buzydetect (unless +; busypattern is set explicitly). The possible values are: +; us (default) +; ca (alias for 'us') +; cr (Costa Rica) +; br (Brazil, alias for 'cr') +; uk +; +; This feature can also easily detect false hangups. The symptoms of this is +; being disconnected in the middle of a call for no reason. +; +;callprogress=yes +;progzone=uk +; +; Set the tonezone. Equivalent of the defaultzone settings in +; /etc/dahdi/system.conf. This sets the tone zone by number. +; Note that you'd still need to load tonezones (loadzone in +; /etc/dahdi/system.conf). +; The default is -1: not to set anything. +;tonezone = 0 ; 0 is US +; +; FXO (FXS signalled) devices must have a timeout to determine if there was a +; hangup before the line was answered. This value can be tweaked to shorten +; how long it takes before DAHDI considers a non-ringing line to have hungup. +; +; ringtimeout will not update on a reload. +; +;ringtimeout=8000 +; +; For FXO (FXS signalled) devices, whether to use pulse dial instead of DTMF +; Pulse digits from phones (FXS devices, FXO signalling) are always +; detected. +; +;pulsedial=yes +; +; For fax detection, uncomment one of the following lines. The default is *OFF* +; +;faxdetect=both +;faxdetect=incoming +;faxdetect=outgoing +;faxdetect=no +; +; When 'faxdetect' is used, one could use 'faxbuffers' to configure the DAHDI +; transmit buffer policy. The default is *OFF*. When this configuration +; option is used, the faxbuffer policy will be used for the life of the call +; after a fax tone is detected. The faxbuffer policy is reverted after the +; call is torn down. The sample below will result in 6 buffers and a full +; buffer policy. +; +;faxbuffers=>6,full +; +; This option specifies a preference for which music on hold class this channel +; should listen to when put on hold if the music class has not been set on the +; channel with Set(CHANNEL(musicclass)=whatever) in the dialplan, and the peer +; channel putting this one on hold did not suggest a music class. +; +; If this option is set to "passthrough", then the hold message will always be +; passed through as signalling instead of generating hold music locally. This +; setting is only valid when used on a channel that uses digital signalling. +; +; This option may be set globally or on a per-channel basis. +; +;mohinterpret=default +; +; This option specifies which music on hold class to suggest to the peer channel +; when this channel places the peer on hold. This option may be set globally, +; or on a per-channel basis. +; +;mohsuggest=default +; +; PRI channels can have an idle extension and a minunused number. So long as +; at least "minunused" channels are idle, chan_dahdi will try to call "idledial" +; on them, and then dump them into the PBX in the "idleext" extension (which +; is of the form exten@context). When channels are needed the "idle" calls +; are disconnected (so long as there are at least "minidle" calls still +; running, of course) to make more channels available. The primary use of +; this is to create a dynamic service, where idle channels are bundled through +; multilink PPP, thus more efficiently utilizing combined voice/data services +; than conventional fixed mappings/muxings. +; +; Those settings cannot be changed on reload. +; +;idledial=6999 +;idleext=6999@dialout +;minunused=2 +;minidle=1 +; +; +; ignore_failed_channels: Continue even if some channels failed to configure. +; False by default, as if even a single channel failed to configure, it might +; mean other channels are misplaced and having them work may not be a good +; idea. If enabled (set to true), chan_dahdi will nevertheless attempt to +; configure other channels rather than giving up. This normally makes sense +; only if you use names (<subdir>!<number>) for DAHDI channels. +;ignore_failed_channels = true +; +; Configure jitter buffers in DAHDI (each one is 20ms, default is 4) +; This is set globally, rather than per-channel. +; +;jitterbuffers=4 +; +;------------------------------ JITTER BUFFER CONFIGURATION -------------------------- +; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a + ; DAHDI channel. Defaults to "no". An enabled jitterbuffer will + ; be used only if the sending side can create and the receiving + ; side can not accept jitter. The DAHDI channel can't accept jitter, + ; thus an enabled jitterbuffer on the receive DAHDI side will always + ; be used if the sending side can create jitter. + +; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds. + +; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is + ; resynchronized. Useful to improve the quality of the voice, with + ; big jumps in/broken timestamps, usually sent from exotic devices + ; and programs. Defaults to 1000. + +; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a DAHDI + ; channel. Two implementations are currently available - "fixed" + ; (with size always equals to jbmax-size) and "adaptive" (with + ; variable size, actually the new jb of IAX2). Defaults to fixed. + +; jbtargetextra = 40 ; This option only affects the jb when 'jbimpl = adaptive' is set. + ; The option represents the number of milliseconds by which the new + ; jitter buffer will pad its size. the default is 40, so without + ; modification, the new jitter buffer will set its size to the jitter + ; value plus 40 milliseconds. increasing this value may help if your + ; network normally has low jitter, but occasionally has spikes. + +; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no". +;----------------------------------------------------------------------------------- +; +; You can define your own custom ring cadences here. You can define up to 8 +; pairs. If the silence is negative, it indicates where the caller ID spill is +; to be placed. Also, if you define any custom cadences, the default cadences +; will be turned off. +; +; This setting is global, rather than per-channel. It will not update on +; a reload. +; +; Syntax is: cadence=ring,silence[,ring,silence[...]] +; +; These are the default cadences: +; +;cadence=125,125,2000,-4000 +;cadence=250,250,500,1000,250,250,500,-4000 +;cadence=125,125,125,125,125,-4000 +;cadence=1000,500,2500,-5000 +; +; Each channel consists of the channel number or range. It inherits the +; parameters that were specified above its declaration. +; +; +;callerid="Green Phone"<(256) 428-6121> +;channel => 1 +;callerid="Black Phone"<(256) 428-6122> +;channel => 2 +;callerid="CallerID Phone" <(630) 372-1564> +;channel => 3 +;callerid="Pac Tel Phone" <(256) 428-6124> +;channel => 4 +;callerid="Uniden Dead" <(256) 428-6125> +;channel => 5 +;callerid="Cortelco 2500" <(256) 428-6126> +;channel => 6 +;callerid="Main TA 750" <(256) 428-6127> +;channel => 44 +; +; For example, maybe we have some other channels which start out in a +; different context and use E & M signalling instead. +; +;context=remote +;signaling=em +;channel => 15 +;channel => 16 + +;signalling=em_w +; +; All those in group 0 I'll use for outgoing calls +; +; Strip most significant digit (9) before sending +; +;stripmsd=1 +;callerid=asreceived +;group=0 +;signalling=fxs_ls +;channel => 45 + +;signalling=fxo_ls +;group=1 +;callerid="Joe Schmoe" <(256) 428-6131> +;channel => 25 +;callerid="Megan May" <(256) 428-6132> +;channel => 26 +;callerid="Suzy Queue" <(256) 428-6233> +;channel => 27 +;callerid="Larry Moe" <(256) 428-6234> +;channel => 28 +; +; Sample PRI (CPE) config: Specify the switchtype, the signalling as either +; pri_cpe or pri_net for CPE or Network termination, and generally you will +; want to create a single "group" for all channels of the PRI. +; +; switchtype cannot be changed on a reload. +; +; switchtype = national +; signalling = pri_cpe +; group = 2 +; channel => 1-23 +; +; Alternatively, the number of the channel may be replaced with a relative +; path to a device file under /dev/dahdi . The final element of that file +; must be a number, though. The directory separator is '!', as we can't +; use '/' in a dial string. So if we have +; +; /dev/dahdi/span-name/pstn/00/1 +; /dev/dahdi/span-name/pstn/00/2 +; /dev/dahdi/span-name/pstn/00/3 +; /dev/dahdi/span-name/pstn/00/4 +; +; we could use: +;channel => span-name!pstn!00!1-4 +; +; or: +;channel => span-name!pstn!00!1,2,3,4 +; +; See also ignore_failed_channels above. + +; Used for distinctive ring support for x100p. +; You can see the dringX patterns is to set any one of the dringXcontext fields +; and they will be printed on the console when an inbound call comes in. +; +; dringXrange is used to change the acceptable ranges for "tone offsets". Defaults to 10. +; Note: a range of 0 is NOT what you might expect - it instead forces it to the default. +; A range of -1 will force it to always match. +; Anything lower than -1 would presumably cause it to never match. +; +;dring1=95,0,0 +;dring1context=internal1 +;dring1range=10 +;dring2=325,95,0 +;dring2context=internal2 +;dring2range=10 +; If no pattern is matched here is where we go. +;context=default +;channel => 1 + +; AMI alarm event reporting +;reportalarms=channels +;Possible values are: +;channels - report each channel alarms (current behavior, default for backward compatibility) +;spans - report an "SpanAlarm" event when the span of any configured channel is alarmed +;all - report channel and span alarms (aggregated behavior) +;none - do not report any alarms. + +; ---------------- Options for use with signalling=ss7 ----------------- +; None of them can be changed by a reload. +; +; Variant of SS7 signalling: +; Options are itu and ansi +;ss7type = itu + +; SS7 Called Nature of Address Indicator +; +; unknown: Unknown +; subscriber: Subscriber +; national: National +; international: International +; dynamic: Dynamically selects the appropriate dialplan +; +;ss7_called_nai=dynamic +; +; SS7 Calling Nature of Address Indicator +; +; unknown: Unknown +; subscriber: Subscriber +; national: National +; international: International +; dynamic: Dynamically selects the appropriate dialplan +; +;ss7_calling_nai=dynamic +; +; +; sample 1 for Germany +;ss7_internationalprefix = 00 +;ss7_nationalprefix = 0 +;ss7_subscriberprefix = +;ss7_unknownprefix = +; + +; This option is used to disable automatic sending of ACM when the call is started +; in the dialplan. If you do use this option, you will need to use the Proceeding() +; application in the dialplan to send ACM. +;ss7_explictacm=yes + +; All settings apply to linkset 1 +;linkset = 1 + +; Point code of the linkset. For ITU, this is the decimal number +; format of the point code. For ANSI, this can either be in decimal +; number format or in the xxx-xxx-xxx format +;pointcode = 1 + +; Point code of node adjacent to this signalling link (Possibly the STP between you and +; your destination). Point code format follows the same rules as above. +;adjpointcode = 2 + +; Default point code that you would like to assign to outgoing messages (in case of +; routing through STPs, or using A links). Point code format follows the same rules +; as above. +;defaultdpc = 3 + +; Begin CIC (Circuit indication codes) count with this number +;cicbeginswith = 1 + +; What the MTP3 network indicator bits should be set to. Choices are +; national, national_spare, international, international_spare +;networkindicator=international + +; First signalling channel +;sigchan = 48 + +; Additional signalling channel for this linkset (So you can have a linkset +; with two signalling links in it). It seems like a silly way to do it, but +; for linksets with multiple signalling links, you add an additional sigchan +; line for every additional signalling link on the linkset. +;sigchan = 96 + +; Channels to associate with CICs on this linkset +;channel = 25-47 +; +; For more information on setting up SS7, see the README file in libss7 or +; the doc/ss7.txt file in the Asterisk source tree. +; ----------------- SS7 Options ---------------------------------------- + +; ---------------- Options for use with signalling=mfcr2 -------------- + +; MFC-R2 signaling has lots of variants from country to country and even sometimes +; minor variants inside the same country. The only mandatory parameters here are: +; mfcr2_variant, mfcr2_max_ani and mfcr2_max_dnis. +; IT IS RECOMMENDED that you leave the default values (leaving it commented) for the +; other parameters unless you have problems or you have been instructed to change some +; parameter. OpenR2 library uses the mfcr2_variant parameter to try to determine the +; best defaults for your country, also refer to the OpenR2 package directory +; doc/asterisk/ where you can find sample configurations for some countries. If you +; want to contribute your configs for a particular country send them to the e-mail +; of the primary OpenR2 developer that you can find in the AUTHORS file of the OpenR2 package + +; MFC/R2 variant. This depends on the OpenR2 supported variants +; A list of values can be found by executing the openr2 command r2test -l +; some valid values are: +; ar (Argentina) +; br (Brazil) +; mx (Mexico) +; ph (Philippines) +; itu (per ITU spec) +; mfcr2_variant=mx + +; Max amount of ANI to ask for +; mfcr2_max_ani=10 + +; Max amount of DNIS to ask for +; mfcr2_max_dnis=4 + +; whether or not to get the ANI before getting DNIS. +; some telcos require ANI first some others do not care +; if this go wrong, change this value +; mfcr2_get_ani_first=no + +; Caller Category to send +; national_subscriber +; national_priority_subscriber +; international_subscriber +; international_priority_subscriber +; collect_call +; usually national_subscriber works just fine +; you can change this setting from the dialplan +; by setting the variable MFCR2_CATEGORY +; (remember to set _MFCR2_CATEGORY from originating channels) +; MFCR2_CATEGORY will also be a variable available in your context +; on incoming calls set to the value received from the far end +; mfcr2_category=national_subscriber + +; Call logging is stored at the Asterisk +; logging directory specified in asterisk.conf +; plus mfcr2/<whatever you put here> +; if you specify 'span1' here and asterisk.conf has +; as logging directory /var/log/asterisk then the full +; path to your MFC/R2 call logs will be /var/log/asterisk/mfcr2/span1 +; (the directory will be automatically created if not present already) +; remember to set mfcr2_call_files=yes +; mfcr2_logdir=span1 + +; whether or not to drop call files into mfcr2_logdir +; mfcr2_call_files=yes|no + +; MFC/R2 valid logging values are: all,error,warning,debug,notice,cas,mf,stack,nothing +; error,warning,debug and notice are self-descriptive +; 'cas' is for logging ABCD CAS tx and rx +; 'mf' is for logging of the Multi Frequency tones +; 'stack' is for very verbose output of the channel and context call stack, only useful +; if you are debugging a crash or want to learn how the library works. The stack logging +; will be only enabled if the openr2 library was compiled with -DOR2_TRACE_STACKS +; You can mix up values, like: loglevel=error,debug,mf to log just error, debug and +; multi frequency messages +; 'all' is a special value to log all the activity +; 'nothing' is a clean-up value, in case you want to not log any activity for +; a channel or group of channels +; BE AWARE that the level of output logged will ALSO depend on +; the value you have in logger.conf, if you disable output in logger.conf +; then it does not matter you specify 'all' here, nothing will be logged +; so logger.conf has the last word on what is going to be logged +; mfcr2_logging=all + +; MFC/R2 value in milliseconds for the MF timeout. Any negative value +; means 'default', smaller values than 500ms are not recommended +; and can cause malfunctioning. If you experience protocol error +; due to MF timeout try incrementing this value in 500ms steps +; mfcr2_mfback_timeout=-1 + +; MFC/R2 value in milliseconds for the metering pulse timeout. +; Metering pulses are sent by some telcos for some R2 variants +; during a call presumably for billing purposes to indicate costs, +; however this pulses use the same signal that is used to indicate +; call hangup, therefore a timeout is sometimes required to distinguish +; between a *real* hangup and a billing pulse that should not +; last more than 500ms, If you experience call drops after some +; minutes of being stablished try setting a value of some ms here, +; values greater than 500ms are not recommended. +; BE AWARE that choosing the proper protocol mfcr2_variant parameter +; implicitly sets a good recommended value for this timer, use this +; parameter only when you *really* want to override the default, otherwise +; just comment out this value or put a -1 +; Any negative value means 'default'. +; mfcr2_metering_pulse_timeout=-1 + +; Brazil uses a special calling party category for collect calls (llamadas por cobrar) +; instead of using the operator (as in Mexico). The R2 spec in Brazil says a special GB tone +; should be used to reject collect calls. If you want to ALLOW collect calls specify 'yes', +; if you want to BLOCK collect calls then say 'no'. Default is to block collect calls. +; (see also 'mfcr2_double_answer') +; mfcr2_allow_collect_calls=no + +; This feature is related but independent of mfcr2_allow_collect_calls +; Some PBX's require a double-answer process to block collect calls, if +; you ever have problems blocking collect calls using Group B signals (mfcr2_allow_collect_calls=no) +; then you may want to try with mfcr2_double_answer=yes, this will cause that every answer signal +; is changed by answer->clear back->answer (sort of a flash) +; (see also 'mfcr2_allow_collect_calls') +; mfcr2_double_answer=no + +; This feature allows to skip the use of Group B/II signals and go directly +; to the accepted state for incoming calls +; mfcr2_immediate_accept=no + +; You most likely dont need this feature. Default is yes. +; When this is set to yes, all calls that are offered (incoming calls) which +; DNIS is valid (exists in extensions.conf) and pass collect call validation +; will be accepted with a Group B tone (either call with charge or not, depending on mfcr2_charge_calls) +; with this set to 'no' then the call will NOT be accepted on offered, and the call will start its +; execution in extensions.conf without being accepted until the channel is answered (either with Answer() or +; any other application resulting in the channel being answered). +; This can be set to 'no' if your telco or PBX needs the hangup cause to be set accurately +; when this option is set to no you must explicitly accept the call with DAHDIAcceptR2Call +; or implicitly through the Answer() application. +; mfcr2_accept_on_offer=yes + +; Skip request of calling party category and ANI +; you need openr2 >= 1.2.0 to use this feature +; mfcr2_skip_category=no + +; WARNING: advanced users only! I really mean it +; this parameter is commented by default because +; YOU DON'T NEED IT UNLESS YOU REALLY GROK MFC/R2 +; READ COMMENTS on doc/r2proto.conf in openr2 package +; for more info +; mfcr2_advanced_protocol_file=/path/to/r2proto.conf + +; Brazil use a special signal to force the release of the line (hangup) from the +; backward perspective. When mfcr2_forced_release=no, the normal clear back signal +; will be sent on hangup, which is OK for all mfcr2 variants I know of, except for +; Brazilian variant, where the central will leave the line up for several seconds (30, 60) +; which sometimes is not what people really want. When mfcr2_forced_release=yes, a different +; signal will be sent to hangup the call indicating that the line should be released immediately +; mfcr2_forced_release=no + +; Whether or not report to the other end 'accept call with charge' +; This setting has no effect with most telecos, usually is safe +; leave the default (yes), but once in a while when interconnecting with +; old PBXs this may be useful. +; Concretely this affects the Group B signal used to accept calls +; The application DAHDIAcceptR2Call can also be used to decide this +; in the dial plan in a per-call basis instead of doing it here for all calls +; mfcr2_charge_calls=yes + +; ---------------- END of options to be used with signalling=mfcr2 + +; Configuration Sections +; ~~~~~~~~~~~~~~~~~~~~~~ +; You can also configure channels in a separate chan_dahdi.conf section. In +; this case the keyword 'channel' is not used. Instead the keyword +; 'dahdichan' is used (as in users.conf) - configuration is only processed +; in a section where the keyword dahdichan is used. It will only be +; processed in the end of the section. Thus the following section: +; +;[phones] +;echocancel = 64 +;dahdichan = 1-8 +;group = 1 +; +; Is somewhat equivalent to the following snippet in the section +; [channels]: +; +;echocancel = 64 +;group = 1 +;channel => 1-8 +; +; When starting a new section almost all of the configuration values are +; copied from their values at the end of the section [channels] in +; chan_dahdi.conf and [general] in users.conf - one section's configuration +; does not affect another one's. +; +; Instead of letting common configuration values "slide through" you can +; use configuration templates to easily keep the common part in one +; place and override where needed. +; +;[phones](!) +;echocancel = yes +;group = 0,4 +;callgroup = 3 +;pickupgroup = 3 +;threewaycalling = yes +;transfer = yes +;context = phones +;faxdetect = incoming +; +;[phone-1](phones) +;dahdichan = 1 +;callerid = My Name <501> +;mailbox = 501@mailboxes +; +; +;[fax](phones) +;dahdichan = 2 +;faxdetect = no +;context = fax +; +;[phone-3](phones) +;dahdichan = 3 +;pickupgroup = 3,4 + +;signalling = bri_net_ptmp +;switchtype = euroisdn +;channel => 2-3 +;;signalling = bri_net +;;channel => 4,5 +;signalling = bri_cpe +;switchtype = euroisdn +;channel => 7-8 +; + +signalling=fxo_ks +callerid="Analog Phone" <1> +mailbox=101 +;txgain=-30.0 +group=11 +context=from-pstn +channel => 1 +; +signalling=fxs_ks +callerid=asreceived +group=12 +context=from-pstn +channel => 2 + +signalling=bri_net_ptmp +;signalling=bri_cpe +overlapdial=yes +switchtype=euroisdn +callerid="ISDN Phone" <2> +context=from-isdn +group=21 +channel => 3-4 + +signalling=bri_net_ptmp +;signalling=bri_cpe_ptmp +overlapdial=yes +switchtype=euroisdn +callerid="Jean" <202> +context=from-isdn +group=22 +channel => 6-7 + +signalling=bri_net_ptmp +;signalling=bri_cpe +context=from-isdn +switchtype=euroisdn +group=23 +channel => 9-10 + +signalling=bri_net_ptmp +;signalling=bri_cpe_ptmp +context=from-isdn +switchtype=euroisdn +group=24 +channel => 12-13 diff --git a/factory/extensions.conf b/factory/extensions.conf new file mode 100644 index 0000000..63726f8 --- /dev/null +++ b/factory/extensions.conf @@ -0,0 +1,52 @@ +[from-internal] +include => default + +[from-sip] +exten = s,1,Dial(DAHDI/g11) + +[from-isdn] +include => default + +[from-pstn] +include => default + +exten = s,1,Noop(${CALLERID} => ${EXTEN}) +same = n,Goto(103,1) + +[default] +; FXS Phone +exten = 1,1,NoOp() +same = n,Dial(DAHDI/g11) + +; FXO +exten = 2,1,NoOp() +same = n,Dial(DAHDI/g12/103) + +; ISDN Phone +exten = _2.,1,NoOp() +same = n,Dial(DAHDI/g21/${EXTEN:1}) + +; ISDN +exten = _3.,1,NoOp() +same = n,Dial(DAHDI/g22/${EXTEN:1}) + +; ISDN +exten = _4.,1,NoOp() +same = n,Dial(DAHDI/g23/${EXTEN:1}) + +; ISDN +exten = _5.,1,NoOp() +same = n,Dial(DAHDI/g24/${EXTEN:1}) + + +; Test sounds +exten = 81,1,While(1) +same = n,Playback(hello-world) +same = n,Sleep(1) +same = n,EndWhile + +exten = 103,1,NoOp(Dial FXS port - this is intended to be a loop) +same = n,Goto(81,1) + +[te] +exten = s,1,NoOp(${CALLERID} => ${EXTEN}) diff --git a/factory/sip.conf b/factory/sip.conf new file mode 100644 index 0000000..83b744e --- /dev/null +++ b/factory/sip.conf @@ -0,0 +1,686 @@ +; +; SIP Configuration example for Asterisk +; +; Syntax for specifying a SIP device in extensions.conf is +; SIP/devicename where devicename is defined in a section below. +; +; You may also use +; SIP/username@domain to call any SIP user on the Internet +; (Don't forget to enable DNS SRV records if you want to use this) +; +; If you define a SIP proxy as a peer below, you may call +; SIP/proxyhostname/user or SIP/user@proxyhostname +; where the proxyhostname is defined in a section below +; +; Useful CLI commands to check peers/users: +; sip show peers Show all SIP peers (including friends) +; sip show users Show all SIP users (including friends) +; sip show registry Show status of hosts we register with +; +; sip debug Show all SIP messages +; +; reload chan_sip.so Reload configuration file +; Active SIP peers will not be reconfigured +; + +[general] +context=from-sip ; Default context for incoming calls +;allowguest=no ; Allow or reject guest calls (default is yes) +allowoverlap=no ; Disable overlap dialing support. (Default is yes) +;allowtransfer=no ; Disable all transfers (unless enabled in peers or users) + ; Default is enabled +;realm=mydomain.tld ; Realm for digest authentication + ; defaults to "asterisk". If you set a system name in + ; asterisk.conf, it defaults to that system name + ; Realms MUST be globally unique according to RFC 3261 + ; Set this to your host name or domain name +bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) + ; bindport is the local UDP port that Asterisk will listen on +bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) +srvlookup=yes ; Enable DNS SRV lookups on outbound calls + ; Note: Asterisk only uses the first host + ; in SRV records + ; Disabling DNS SRV lookups disables the + ; ability to place SIP calls based on domain + ; names to some other SIP users on the Internet + +;domain=mydomain.tld ; Set default domain for this host + ; If configured, Asterisk will only allow + ; INVITE and REFER to non-local domains + ; Use "sip show domains" to list local domains +;pedantic=yes ; Enable checking of tags in headers, + ; international character conversions in URIs + ; and multiline formatted headers for strict + ; SIP compatibility (defaults to "no") + +; See doc/ip-tos.txt for a description of these parameters. +;tos_sip=cs3 ; Sets TOS for SIP packets. +;tos_audio=ef ; Sets TOS for RTP audio packets. +;tos_video=af41 ; Sets TOS for RTP video packets. + +;maxexpiry=3600 ; Maximum allowed time of incoming registrations + ; and subscriptions (seconds) +;minexpiry=60 ; Minimum length of registrations/subscriptions (default 60) +;defaultexpiry=120 ; Default length of incoming/outgoing registration +;t1min=100 ; Minimum roundtrip time for messages to monitored hosts + ; Defaults to 100 ms +;notifymimetype=text/plain ; Allow overriding of mime type in MWI NOTIFY +;checkmwi=10 ; Default time between mailbox checks for peers +;buggymwi=no ; Cisco SIP firmware doesn't support the MWI RFC + ; fully. Enable this option to not get error messages + ; when sending MWI to phones with this bug. +;vmexten=voicemail ; dialplan extension to reach mailbox sets the + ; Message-Account in the MWI notify message + ; defaults to "asterisk" +;disallow=all ; First disallow all codecs +;allow=ulaw ; Allow codecs in order of preference +;allow=ilbc ; see doc/rtp-packetization for framing options +; +; This option specifies a preference for which music on hold class this channel +; should listen to when put on hold if the music class has not been set on the +; channel with Set(CHANNEL(musicclass)=whatever) in the dialplan, and the peer +; channel putting this one on hold did not suggest a music class. +; +; This option may be specified globally, or on a per-user or per-peer basis. +; +;mohinterpret=default +; +; This option specifies which music on hold class to suggest to the peer channel +; when this channel places the peer on hold. It may be specified globally or on +; a per-user or per-peer basis. +; +;mohsuggest=default +; +;language=en ; Default language setting for all users/peers + ; This may also be set for individual users/peers +;relaxdtmf=yes ; Relax dtmf handling +;trustrpid = no ; If Remote-Party-ID should be trusted +;sendrpid = yes ; If Remote-Party-ID should be sent +;progressinband=never ; If we should generate in-band ringing always + ; use 'never' to never use in-band signalling, even in cases + ; where some buggy devices might not render it + ; Valid values: yes, no, never Default: never +;useragent=Asterisk PBX ; Allows you to change the user agent string +;promiscredir = no ; If yes, allows 302 or REDIR to non-local SIP address + ; Note that promiscredir when redirects are made to the + ; local system will cause loops since Asterisk is incapable + ; of performing a "hairpin" call. +;usereqphone = no ; If yes, ";user=phone" is added to uri that contains + ; a valid phone number +;dtmfmode = rfc2833 ; Set default dtmfmode for sending DTMF. Default: rfc2833 + ; Other options: + ; info : SIP INFO messages + ; inband : Inband audio (requires 64 kbit codec -alaw, ulaw) + ; auto : Use rfc2833 if offered, inband otherwise + +;compactheaders = yes ; send compact sip headers. +; +;videosupport=yes ; Turn on support for SIP video. You need to turn this on + ; in the this section to get any video support at all. + ; You can turn it off on a per peer basis if the general + ; video support is enabled, but you can't enable it for + ; one peer only without enabling in the general section. +;maxcallbitrate=384 ; Maximum bitrate for video calls (default 384 kb/s) + ; Videosupport and maxcallbitrate is settable + ; for peers and users as well +;callevents=no ; generate manager events when sip ua + ; performs events (e.g. hold) +;alwaysauthreject = yes ; When an incoming INVITE or REGISTER is to be rejected, + ; for any reason, always reject with '401 Unauthorized' + ; instead of letting the requester know whether there was + ; a matching user or peer for their request + +;g726nonstandard = yes ; If the peer negotiates G726-32 audio, use AAL2 packing + ; order instead of RFC3551 packing order (this is required + ; for Sipura and Grandstream ATAs, among others). This is + ; contrary to the RFC3551 specification, the peer _should_ + ; be negotiating AAL2-G726-32 instead :-( + +;matchexterniplocally = yes ; Only substitute the externip or externhost setting if it matches + ; your localnet setting. Unless you have some sort of strange network + ; setup you will not need to enable this. + +; +; If regcontext is specified, Asterisk will dynamically create and destroy a +; NoOp priority 1 extension for a given peer who registers or unregisters with +; us and have a "regexten=" configuration item. +; Multiple contexts may be specified by separating them with '&'. The +; actual extension is the 'regexten' parameter of the registering peer or its +; name if 'regexten' is not provided. If more than one context is provided, +; the context must be specified within regexten by appending the desired +; context after '@'. More than one regexten may be supplied if they are +; separated by '&'. Patterns may be used in regexten. +; +;regcontext=sipregistrations +; +;--------------------------- RTP timers ---------------------------------------------------- +; These timers are currently used for both audio and video streams. The RTP timeouts +; are only applied to the audio channel. +; The settings are settable in the global section as well as per device +; +;rtptimeout=60 ; Terminate call if 60 seconds of no RTP or RTCP activity + ; on the audio channel + ; when we're not on hold. This is to be able to hangup + ; a call in the case of a phone disappearing from the net, + ; like a powerloss or grandma tripping over a cable. +;rtpholdtimeout=300 ; Terminate call if 300 seconds of no RTP or RTCP activity + ; on the audio channel + ; when we're on hold (must be > rtptimeout) +;rtpkeepalive=<secs> ; Send keepalives in the RTP stream to keep NAT open + ; (default is off - zero) +;--------------------------- SIP DEBUGGING --------------------------------------------------- +;sipdebug = yes ; Turn on SIP debugging by default, from + ; the moment the channel loads this configuration +;recordhistory=yes ; Record SIP history by default + ; (see sip history / sip no history) +;dumphistory=yes ; Dump SIP history at end of SIP dialogue + ; SIP history is output to the DEBUG logging channel + + +;--------------------------- STATUS NOTIFICATIONS (SUBSCRIPTIONS) ---------------------------- +; You can subscribe to the status of extensions with a "hint" priority +; (See extensions.conf.sample for examples) +; chan_sip support two major formats for notifications: dialog-info and SIMPLE +; +; You will get more detailed reports (busy etc) if you have a call limit set +; for a device. When the call limit is filled, we will indicate busy. Note that +; you need at least 2 in order to be able to do attended transfers. +; +; For queues, you will need this level of detail in status reporting, regardless +; if you use SIP subscriptions. Queues and manager use the same internal interface +; for reading status information. +; +; Note: Subscriptions does not work if you have a realtime dialplan and use the +; realtime switch. +; +;allowsubscribe=no ; Disable support for subscriptions. (Default is yes) +;subscribecontext = default ; Set a specific context for SUBSCRIBE requests + ; Useful to limit subscriptions to local extensions + ; Settable per peer/user also +;notifyringing = yes ; Notify subscriptions on RINGING state (default: no) +;notifyhold = yes ; Notify subscriptions on HOLD state (default: no) + ; Turning on notifyringing and notifyhold will add a lot + ; more database transactions if you are using realtime. +;limitonpeers = yes ; Apply call limits on peers only. This will improve + ; status notification when you are using type=friend + ; Inbound calls, that really apply to the user part + ; of a friend will now be added to and compared with + ; the peer limit instead of applying two call limits, + ; one for the peer and one for the user. + ; "sip show inuse" will only show active calls on + ; the peer side of a "type=friend" object if this + ; setting is turned on. + +;----------------------------------------- T.38 FAX PASSTHROUGH SUPPORT ----------------------- +; +; This setting is available in the [general] section as well as in device configurations. +; Setting this to yes, enables T.38 fax (UDPTL) passthrough on SIP to SIP calls, provided +; both parties have T38 support enabled in their Asterisk configuration +; This has to be enabled in the general section for all devices to work. You can then +; disable it on a per device basis. +; +; T.38 faxing only works in SIP to SIP calls, with no local or agent channel being used. +; +; t38pt_udptl = yes ; Default false +; +;----------------------------------------- OUTBOUND SIP REGISTRATIONS ------------------------ +; Asterisk can register as a SIP user agent to a SIP proxy (provider) +; Format for the register statement is: +; register => user[:secret[:authuser]]@host[:port][/extension] +; +; If no extension is given, the 's' extension is used. The extension needs to +; be defined in extensions.conf to be able to accept calls from this SIP proxy +; (provider). +; +; host is either a host name defined in DNS or the name of a section defined +; below. +; +; Examples: +; + +; XIVO XIVO XIVO + +; register => test-oh:toto@192.168.0.252 + +register => wg4xt2:29PUQE@192.168.17.252 + +; 41302 + +[test-oh] +type=friend +username=wg4xt2 +fromuser=41302 +secret=29PUQE +host=192.168.17.252 +nat=no + + +; +; This will pass incoming calls to the 's' extension +; +; +;register => 2345:password@sip_proxy/1234 +; +; Register 2345 at sip provider 'sip_proxy'. Calls from this provider +; connect to local extension 1234 in extensions.conf, default context, +; unless you configure a [sip_proxy] section below, and configure a +; context. +; Tip 1: Avoid assigning hostname to a sip.conf section like [provider.com] +; Tip 2: Use separate type=peer and type=user sections for SIP providers +; (instead of type=friend) if you have calls in both directions + +;registertimeout=20 ; retry registration calls every 20 seconds (default) +;registerattempts=10 ; Number of registration attempts before we give up + ; 0 = continue forever, hammering the other server + ; until it accepts the registration + ; Default is 0 tries, continue forever + +;----------------------------------------- NAT SUPPORT ------------------------ +; The externip, externhost and localnet settings are used if you use Asterisk +; behind a NAT device to communicate with services on the outside. + +;externip = 200.201.202.203 ; Address that we're going to put in outbound SIP + ; messages if we're behind a NAT + + ; The externip and localnet is used + ; when registering and communicating with other proxies + ; that we're registered with +;externhost=foo.dyndns.net ; Alternatively you can specify an + ; external host, and Asterisk will + ; perform DNS queries periodically. Not + ; recommended for production + ; environments! Use externip instead +;externrefresh=10 ; How often to refresh externhost if + ; used + ; You may add multiple local networks. A reasonable + ; set of defaults are: +;localnet=192.168.0.0/255.255.0.0; All RFC 1918 addresses are local networks +;localnet=10.0.0.0/255.0.0.0 ; Also RFC1918 +;localnet=172.16.0.0/12 ; Another RFC1918 with CIDR notation +;localnet=169.254.0.0/255.255.0.0 ;Zero conf local network + +; The nat= setting is used when Asterisk is on a public IP, communicating with +; devices hidden behind a NAT device (broadband router). If you have one-way +; audio problems, you usually have problems with your NAT configuration or your +; firewall's support of SIP+RTP ports. You configure Asterisk choice of RTP +; ports for incoming audio in rtp.conf +; +;nat=no ; Global NAT settings (Affects all peers and users) + ; yes = Always ignore info and assume NAT + ; no = Use NAT mode only according to RFC3581 (;rport) + ; never = Never attempt NAT mode or RFC3581 support + ; route = Assume NAT, don't send rport + ; (work around more UNIDEN bugs) + +;----------------------------------- MEDIA HANDLING -------------------------------- +; By default, Asterisk tries to re-invite the audio to an optimal path. If there's +; no reason for Asterisk to stay in the media path, the media will be redirected. +; This does not really work with in the case where Asterisk is outside and have +; clients on the inside of a NAT. In that case, you want to set canreinvite=nonat +; +;canreinvite=yes ; Asterisk by default tries to redirect the + ; RTP media stream (audio) to go directly from + ; the caller to the callee. Some devices do not + ; support this (especially if one of them is behind a NAT). + ; The default setting is YES. If you have all clients + ; behind a NAT, or for some other reason wants Asterisk to + ; stay in the audio path, you may want to turn this off. + + ; In Asterisk 1.4 this setting also affect direct RTP + ; at call setup (a new feature in 1.4 - setting up the + ; call directly between the endpoints instead of sending + ; a re-INVITE). + +;directrtpsetup=yes ; Enable the new experimental direct RTP setup. This sets up + ; the call directly with media peer-2-peer without re-invites. + ; Will not work for video and cases where the callee sends + ; RTP payloads and fmtp headers in the 200 OK that does not match the + ; callers INVITE. This will also fail if canreinvite is enabled when + ; the device is actually behind NAT. + +;canreinvite=nonat ; An additional option is to allow media path redirection + ; (reinvite) but only when the peer where the media is being + ; sent is known to not be behind a NAT (as the RTP core can + ; determine it based on the apparent IP address the media + ; arrives from). + +;canreinvite=update ; Yet a third option... use UPDATE for media path redirection, + ; instead of INVITE. This can be combined with 'nonat', as + ; 'canreinvite=update,nonat'. It implies 'yes'. + +;----------------------------------------- REALTIME SUPPORT ------------------------ +; For additional information on ARA, the Asterisk Realtime Architecture, +; please read realtime.txt and extconfig.txt in the /doc directory of the +; source code. +; +;rtcachefriends=yes ; Cache realtime friends by adding them to the internal list + ; just like friends added from the config file only on a + ; as-needed basis? (yes|no) + +;rtsavesysname=yes ; Save systemname in realtime database at registration + ; Default= no + +;rtupdate=yes ; Send registry updates to database using realtime? (yes|no) + ; If set to yes, when a SIP UA registers successfully, the ip address, + ; the origination port, the registration period, and the username of + ; the UA will be set to database via realtime. + ; If not present, defaults to 'yes'. +;rtautoclear=yes ; Auto-Expire friends created on the fly on the same schedule + ; as if it had just registered? (yes|no|<seconds>) + ; If set to yes, when the registration expires, the friend will + ; vanish from the configuration until requested again. If set + ; to an integer, friends expire within this number of seconds + ; instead of the registration interval. + +;ignoreregexpire=yes ; Enabling this setting has two functions: + ; + ; For non-realtime peers, when their registration expires, the + ; information will _not_ be removed from memory or the Asterisk database + ; if you attempt to place a call to the peer, the existing information + ; will be used in spite of it having expired + ; + ; For realtime peers, when the peer is retrieved from realtime storage, + ; the registration information will be used regardless of whether + ; it has expired or not; if it expires while the realtime peer + ; is still in memory (due to caching or other reasons), the + ; information will not be removed from realtime storage + +;----------------------------------------- SIP DOMAIN SUPPORT ------------------------ +; Incoming INVITE and REFER messages can be matched against a list of 'allowed' +; domains, each of which can direct the call to a specific context if desired. +; By default, all domains are accepted and sent to the default context or the +; context associated with the user/peer placing the call. +; Domains can be specified using: +; domain=<domain>[,<context>] +; Examples: +; domain=myasterisk.dom +; domain=customer.com,customer-context +; +; In addition, all the 'default' domains associated with a server should be +; added if incoming request filtering is desired. +; autodomain=yes +; +; To disallow requests for domains not serviced by this server: +; allowexternaldomains=no + +;domain=mydomain.tld,mydomain-incoming + ; Add domain and configure incoming context + ; for external calls to this domain +;domain=1.2.3.4 ; Add IP address as local domain + ; You can have several "domain" settings +;allowexternaldomains=no ; Disable INVITE and REFER to non-local domains + ; Default is yes +;autodomain=yes ; Turn this on to have Asterisk add local host + ; name and local IP to domain list. + +; fromdomain=mydomain.tld ; When making outbound SIP INVITEs to + ; non-peers, use your primary domain "identity" + ; for From: headers instead of just your IP + ; address. This is to be polite and + ; it may be a mandatory requirement for some + ; destinations which do not have a prior + ; account relationship with your server. + +;------------------------------ JITTER BUFFER CONFIGURATION -------------------------- +; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a + ; SIP channel. Defaults to "no". An enabled jitterbuffer will + ; be used only if the sending side can create and the receiving + ; side can not accept jitter. The SIP channel can accept jitter, + ; thus a jitterbuffer on the receive SIP side will be used only + ; if it is forced and enabled. + +; jbforce = no ; Forces the use of a jitterbuffer on the receive side of a SIP + ; channel. Defaults to "no". + +; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds. + +; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is + ; resynchronized. Useful to improve the quality of the voice, with + ; big jumps in/broken timestamps, usually sent from exotic devices + ; and programs. Defaults to 1000. + +; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a SIP + ; channel. Two implementations are currently available - "fixed" + ; (with size always equals to jbmaxsize) and "adaptive" (with + ; variable size, actually the new jb of IAX2). Defaults to fixed. + +; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no". +;----------------------------------------------------------------------------------- + +[authentication] +; Global credentials for outbound calls, i.e. when a proxy challenges your +; Asterisk server for authentication. These credentials override +; any credentials in peer/register definition if realm is matched. +; +; This way, Asterisk can authenticate for outbound calls to other +; realms. We match realm on the proxy challenge and pick an set of +; credentials from this list +; Syntax: +; auth = <user>:<secret>@<realm> +; auth = <user>#<md5secret>@<realm> +; Example: +;auth=mark:topsecret@digium.com +; +; You may also add auth= statements to [peer] definitions +; Peer auth= override all other authentication settings if we match on realm + +;------------------------------------------------------------------------------ +; Users and peers have different settings available. Friends have all settings, +; since a friend is both a peer and a user +; +; User config options: Peer configuration: +; -------------------- ------------------- +; context context +; callingpres callingpres +; permit permit +; deny deny +; secret secret +; md5secret md5secret +; dtmfmode dtmfmode +; canreinvite canreinvite +; nat nat +; callgroup callgroup +; pickupgroup pickupgroup +; language language +; allow allow +; disallow disallow +; insecure insecure +; trustrpid trustrpid +; progressinband progressinband +; promiscredir promiscredir +; useclientcode useclientcode +; accountcode accountcode +; setvar setvar +; callerid callerid +; amaflags amaflags +; call-limit call-limit +; allowoverlap allowoverlap +; allowsubscribe allowsubscribe +; allowtransfer allowtransfer +; subscribecontext subscribecontext +; videosupport videosupport +; maxcallbitrate maxcallbitrate +; rfc2833compensate mailbox +; t38pt_usertpsource username +; template +; fromdomain +; regexten +; fromuser +; host +; port +; qualify +; defaultip +; rtptimeout +; rtpholdtimeout +; sendrpid +; outboundproxy +; rfc2833compensate +; t38pt_usertpsource + +;[sip_proxy] +; For incoming calls only. Example: FWD (Free World Dialup) +; We match on IP address of the proxy for incoming calls +; since we can not match on username (caller id) +;type=peer +;context=from-fwd +;host=fwd.pulver.com + +;[sip_proxy-out] +;type=peer ; we only want to call out, not be called +;secret=guessit +;username=yourusername ; Authentication user for outbound proxies +;fromuser=yourusername ; Many SIP providers require this! +;fromdomain=provider.sip.domain +;host=box.provider.com +;usereqphone=yes ; This provider requires ";user=phone" on URI +;call-limit=5 ; permit only 5 simultaneous outgoing calls to this peer +;outboundproxy=proxy.provider.domain ; send outbound signaling to this proxy, not directly to the peer + ; Call-limits will not be enforced on real-time peers, + ; since they are not stored in-memory +;port=80 ; The port number we want to connect to on the remote side + ; Also used as "defaultport" in combination with "defaultip" settings + +;------------------------------------------------------------------------------ +; Definitions of locally connected SIP devices +; +; type = user a device that authenticates to us by "from" field to place calls +; type = peer a device we place calls to or that calls us and we match by host +; type = friend two configurations (peer+user) in one +; +; For device names, we recommend using only a-z, numerics (0-9) and underscore +; +; For local phones, type=friend works most of the time +; +; If you have one-way audio, you probably have NAT problems. +; If Asterisk is on a public IP, and the phone is inside of a NAT device +; you will need to configure nat option for those phones. +; Also, turn on qualify=yes to keep the nat session open + +;[grandstream1] +;type=friend +;context=from-sip ; Where to start in the dialplan when this phone calls +;callerid=John Doe <1234> ; Full caller ID, to override the phones config + ; on incoming calls to Asterisk +;host=192.168.0.23 ; we have a static but private IP address + ; No registration allowed +;nat=no ; there is not NAT between phone and Asterisk +;canreinvite=yes ; allow RTP voice traffic to bypass Asterisk +;dtmfmode=info ; either RFC2833 or INFO for the BudgeTone +;call-limit=1 ; permit only 1 outgoing call and 1 incoming call at a time + ; from the phone to asterisk + ; 1 for the explicit peer, 1 for the explicit user, + ; remember that a friend equals 1 peer and 1 user in + ; memory + ; This will affect your subscriptions as well. + ; There is no combined call counter for a "friend" + ; so there's currently no way in sip.conf to limit + ; to one inbound or outbound call per phone. Use + ; the group counters in the dial plan for that. + ; +;mailbox=1234@default ; mailbox 1234 in voicemail context "default" +;disallow=all ; need to disallow=all before we can use allow= +;allow=ulaw ; Note: In user sections the order of codecs + ; listed with allow= does NOT matter! +;allow=alaw +;allow=g723.1 ; Asterisk only supports g723.1 pass-thru! +;allow=g729 ; Pass-thru only unless g729 license obtained +;callingpres=allowed_passed_screen ; Set caller ID presentation + ; See doc/callingpres.txt for more information + + +;[xlite1] +; Turn off silence suppression in X-Lite ("Transmit Silence"=YES)! +; Note that Xlite sends NAT keep-alive packets, so qualify=yes is not needed +;type=friend +;regexten=1234 ; When they register, create extension 1234 +;callerid="Jane Smith" <5678> +;host=dynamic ; This device needs to register +;nat=yes ; X-Lite is behind a NAT router +;canreinvite=no ; Typically set to NO if behind NAT +;disallow=all +;allow=gsm ; GSM consumes far less bandwidth than ulaw +;allow=ulaw +;allow=alaw +;mailbox=1234@default,1233@default ; Subscribe to status of multiple mailboxes + + +;[snom] +;type=friend ; Friends place calls and receive calls +;context=from-sip ; Context for incoming calls from this user +;secret=blah +;subscribecontext=localextensions ; Only allow SUBSCRIBE for local extensions +;language=de ; Use German prompts for this user +;host=dynamic ; This peer register with us +;dtmfmode=inband ; Choices are inband, rfc2833, or info +;defaultip=192.168.0.59 ; IP used until peer registers +;mailbox=1234@context,2345 ; Mailbox(-es) for message waiting indicator +;subscribemwi=yes ; Only send notifications if this phone + ; subscribes for mailbox notification +;vmexten=voicemail ; dialplan extension to reach mailbox + ; sets the Message-Account in the MWI notify message + ; defaults to global vmexten which defaults to "asterisk" +;disallow=all +;allow=ulaw ; dtmfmode=inband only works with ulaw or alaw! + + +;[polycom] +;type=friend ; Friends place calls and receive calls +;context=from-sip ; Context for incoming calls from this user +;secret=blahpoly +;host=dynamic ; This peer register with us +;dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info +;username=polly ; Username to use in INVITE until peer registers + ; Normally you do NOT need to set this parameter +;disallow=all +;allow=ulaw ; dtmfmode=inband only works with ulaw or alaw! +;progressinband=no ; Polycom phones don't work properly with "never" + + +;[pingtel] +;type=friend +;secret=blah +;host=dynamic +;insecure=port ; Allow matching of peer by IP address without + ; matching port number +;insecure=invite ; Do not require authentication of incoming INVITEs +;insecure=port,invite ; (both) +;qualify=1000 ; Consider it down if it's 1 second to reply + ; Helps with NAT session + ; qualify=yes uses default value +; +; Call group and Pickup group should be in the range from 0 to 63 +; +;callgroup=1,3-4 ; We are in caller groups 1,3,4 +;pickupgroup=1,3-5 ; We can do call pick-p for call group 1,3,4,5 +;defaultip=192.168.0.60 ; IP address to use if peer has not registered +;deny=0.0.0.0/0.0.0.0 ; ACL: Control access to this account based on IP address +;permit=192.168.0.60/255.255.255.0 + +;[cisco1] +;type=friend +;secret=blah +;qualify=200 ; Qualify peer is no more than 200ms away +;nat=yes ; This phone may be natted + ; Send SIP and RTP to the IP address that packet is + ; received from instead of trusting SIP headers +;host=dynamic ; This device registers with us +;canreinvite=no ; Asterisk by default tries to redirect the + ; RTP media stream (audio) to go directly from + ; the caller to the callee. Some devices do not + ; support this (especially if one of them is + ; behind a NAT). +;defaultip=192.168.0.4 ; IP address to use until registration +;username=goran ; Username to use when calling this device before registration + ; Normally you do NOT need to set this parameter +;setvar=CUSTID=5678 ; Channel variable to be set for all calls from this device + +;[pre14-asterisk] +;type=friend +;secret=digium +;host=dynamic +;rfc2833compensate=yes ; Compensate for pre-1.4 DTMF transmission from another Asterisk machine. + ; You must have this turned on or DTMF reception will work improperly. +;t38pt_usertpsource=yes ; Use the source IP address of RTP as the destination IP address for UDPTL packets + ; if the nat option is enabled. If a single RTP packet is received Asterisk will know the + ; external IP address of the remote device. If port forwarding is done at the client side + ; then UDPTL will flow to the remote device. diff --git a/factory/system.conf b/factory/system.conf new file mode 100644 index 0000000..a9b6695 --- /dev/null +++ b/factory/system.conf @@ -0,0 +1,33 @@ +# Autogenerated by /usr/sbin/dahdi_genconf on Thu Dec 9 06:33:08 2010 +# If you edit this file and execute /usr/sbin/dahdi_genconf again, +# your manual changes will be LOST. +# Dahdi Configuration File +# +# This file is parsed by the Dahdi Configurator, dahdi_cfg +# +# Global data + +fxoks=1 +#echocanceller=mg2,1 +fxsks=2 +#echocanceller=mg2,3 + +span=2,0,0,ccs,ami,nt,term +bchan=3-4 +hardhdlc=5 + +span=3,0,0,ccs,ami,nt,term +bchan=6-7 +hardhdlc=8 + +span=4,0,0,ccs,ami,nt,term +bchan=9-10 +hardhdlc=11 + +span=5,0,0,ccs,ami,nt,term +bchan=12-13 +hardhdlc=14 + +loadzone = fr +defaultzone = fr + |