| Age | Commit message (Collapse) | Author |
|---|
|
Like in Spectrum, use the number of analyzers taken from the devlink
command.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the number of analyzers taken from the devlink command, instead of
hard-coded value, in order to make the test more generic.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
test_progs is much more sophisticated superset of tests compared to
test_libbpf.sh and test_libbpf_open. Remove test_libbpf.sh and
test_libbpf_open.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-8-andriin@fb.com
|
|
test_queue_stack_map.h is used only from BPF programs. Thus it should be
part of progs/ subdir. An added benefit of moving it there is that new
TEST_RUNNER_DEFINE_RULES macro-rule will properly capture dependency on
this header for all BPF objects and trigger re-build, if it changes.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-7-andriin@fb.com
|
|
Define test runner generation meta-rule that codifies dependencies
between test runner, its tests, and its dependent BPF programs. Use that
for defining test_progs and test_maps test-runners. Also additionally define
2 flavors of test_progs:
- alu32, which builds BPF programs with 32-bit registers codegen;
- bpf_gcc, which build BPF programs using GCC, if it supports BPF target.
Overall, this is accomplished through $(eval)'ing a set of generic
rules, which defines Makefile targets dynamically at runtime. See
comments explaining the need for 2 $(evals), though.
For each test runner we have (test_maps and test_progs, currently), and,
optionally, their flavors, the logic of build process is modeled as
follows (using test_progs as an example):
- all BPF objects are in progs/:
- BPF object's .o file is built into output directory from
corresponding progs/.c file;
- all BPF objects in progs/*.c depend on all progs/*.h headers;
- all BPF objects depend on bpf_*.h helpers from libbpf (but not
libbpf archive). There is an extra rule to trigger bpf_helper_defs.h
(re-)build, if it's not present/outdated);
- build recipe for BPF object can be re-defined per test runner/flavor;
- test files are built from prog_tests/*.c:
- all such test file objects are built on individual file basis;
- currently, every single test file depends on all BPF object files;
this might be improved in follow up patches to do 1-to-1 dependency,
but allowing to customize this per each individual test;
- each test runner definition can specify a list of extra .c and .h
files to be built along test files and test runner binary; all such
headers are becoming automatic dependency of each test .c file;
- due to test files sometimes embedding (using .incbin assembly
directive) contents of some BPF objects at compilation time, which are
expected to be in CWD of compiler, compilation for test file object does
cd into test runner's output directory; to support this mode all the
include paths are turned into absolute paths using $(abspath) make
function;
- prog_tests/test.h is automatically (re-)generated with an entry for
each .c file in prog_tests/;
- final test runner binary is linked together from test object files and
extra object files, linking together libbpf's archive as well;
- it's possible to specify extra "resource" files/targets, which will be
copied into test runner output directory, if it differes from
Makefile-wide $(OUTPUT). This is used to ensure btf_dump test cases and
urandom_read binary is put into a test runner's CWD for tests to find
them in runtime.
For flavored test runners, their output directory is a subdirectory of
common Makefile-wide $(OUTPUT) directory with flavor name used as
subdirectory name.
BPF objects targets might be reused between different test runners, so
extra checks are employed to not double-define them. Similarly, we have
redefinition guards for output directories and test headers.
test_verifier follows slightly different patterns and is simple enough
to not justify generalizing TEST_RUNNER_DEFINE/TEST_RUNNER_DEFINE_RULES
further to accomodate these differences. Instead, rules for
test_verifier are minimized and simplified, while preserving correctness
of dependencies.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-6-andriin@fb.com
|
|
Currently it's impossible to do `make test_progs` and have only
test_progs be built, because all the binary targets are defined in terms
of $(OUTPUT)/<binary>, and $(OUTPUT) is absolute path to current
directory (or whatever gets overridden to by user).
This patch adds simple re-directing targets for all test targets making
it possible to do simple and nice `make test_progs` (and any other
target).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-5-andriin@fb.com
|
|
Make test_maps use tests.h header format consistent with the one used by
test_progs, to facilitate unification.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-4-andriin@fb.com
|
|
test_core_reloc_kernel test captures its own process name and validates
it as part of the test. Given extra "flavors" of test_progs, this break
for anything by default test_progs binary. Fix the test to cut out
flavor part of the process name.
Fixes: ee2eb063d330 ("selftests/bpf: Add BPF_CORE_READ and BPF_CORE_READ_STR_INTO macro tests")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-3-andriin@fb.com
|
|
We are building a bunch of "flavors" of test_progs, e.g., w/ alu32 flag
for Clang when building BPF object. test_progs setup is relying on
having all the BPF object files and extra resources to be available in
current working directory, though. But we actually build all these files
into a separate sub-directory. Next set of patches establishes
convention of naming "flavored" test_progs (and test runner binaries in
general) as test_progs-flavor (e.g., test_progs-alu32), for each such
extra flavor. This patch teaches test_progs binary to automatically
detect its own extra flavor based on its argv[0], and if present, to
change current directory to a flavor-specific subdirectory.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-2-andriin@fb.com
|
|
flow_dissector_reattach test changes the netns we run in but does not
restore it to the one we started in when finished. This interferes with
tests that run after it. Fix it by restoring the netns when done.
Fixes: f97eea1756f3 ("selftests/bpf: Check that flow dissector can be re-attached")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191017083752.30999-1-jakub@cloudflare.com
|
|
Load basic cls_bpf program.
Load raw_tracepoint program and attach to kfree_skb raw tracepoint.
Trigger cls_bpf via prog_test_run.
At the end of test_run kernel will call kfree_skb
which will trigger trace_kfree_skb tracepoint.
Which will call our raw_tracepoint program.
Which will take that skb and will dump it into perf ring buffer.
Check that user space received correct packet.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-12-ast@kernel.org
|
|
Introduce new helper that reuses existing skb perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct sk_buff *' as tracepoint argument or
can walk other kernel data structures to skb pointer.
In order to do that teach verifier to resolve true C types
of bpf helpers into in-kernel BTF ids.
The type of kernel pointer passed by raw tracepoint into bpf
program will be tracked by the verifier all the way until
it's passed into helper function.
For example:
kfree_skb() kernel function calls trace_kfree_skb(skb, loc);
bpf programs receives that skb pointer and may eventually
pass it into bpf_skb_output() bpf helper which in-kernel is
implemented via bpf_skb_event_output() kernel function.
Its first argument in the kernel is 'struct sk_buff *'.
The verifier makes sure that types match all the way.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-11-ast@kernel.org
|
|
It's a responsiblity of bpf program author to annotate the program
with SEC("tp_btf/name") where "name" is a valid raw tracepoint.
The libbpf will try to find "name" in vmlinux BTF and error out
in case vmlinux BTF is not available or "name" is not found.
If "name" is indeed a valid raw tracepoint then in-kernel BTF
will have "btf_trace_##name" typedef that points to function
prototype of that raw tracepoint. BTF description captures
exact argument the kernel C code is passing into raw tracepoint.
The kernel verifier will check the types while loading bpf program.
libbpf keeps BTF type id in expected_attach_type, but since
kernel ignores this attribute for tracing programs copy it
into attach_btf_id attribute before loading.
Later the kernel will use prog->attach_btf_id to select raw tracepoint
during bpf_raw_tracepoint_open syscall command.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-6-ast@kernel.org
|
|
Add attach_btf_id attribute to prog_load command.
It's similar to existing expected_attach_type attribute which is
used in several cgroup based program types.
Unfortunately expected_attach_type is ignored for
tracing programs and cannot be reused for new purpose.
Hence introduce attach_btf_id to verify bpf programs against
given in-kernel BTF type id at load time.
It is strictly checked to be valid for raw_tp programs only.
In a later patches it will become:
btf_id == 0 semantics of existing raw_tp progs.
btd_id > 0 raw_tp with BTF and additional type safety.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-5-ast@kernel.org
|
|
The memory @orig_flags is allocated by strdup(), it is freed on the
normal path, but leak to free on the error path.
Fix this by adding free(orig_flags) on the error path.
Fixes: 0e11115644b3 ("perf kmem: Print gfp flags in human readable string")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/f9e9f458-96f3-4a97-a1d5-9feec2420e07@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Added TDC test cases for Ethernet LAYERED_OP operations:
- set single source Ethernet MAC
- set single destination Ethernet MAC
- set single invalid destination Ethernet MAC
- set Ethernet type
- invert source/destination/type fields
- add operation on Ethernet type field
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently couple of files that are write only were added to netdevsim
debugfs. Don't read these files and avoid error.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Make sure BPF_PROG_TEST_RUN accepts tstamp and exports any
modifications that BPF program does.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191015183125.124413-2-sdf@google.com
|
|
Add a bunch of tests validating CO-RE is handling field existence
relocation. Relaxed CO-RE relocation mode is activated for these new
tests to prevent libbpf from rejecting BPF object for no-match
relocation, even though test BPF program is not going to use that
relocation, if field is missing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-6-andriin@fb.com
|
|
Add enum definition for Clang's __builtin_preserve_field_info()
second argument (info_kind). Currently only byte offset and existence
are supported. Corresponding Clang changes introducing this built-in can
be found at [0]
[0] https://reviews.llvm.org/D67980
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-5-andriin@fb.com
|
|
Add support for BPF_FRK_EXISTS relocation kind to detect existence of
captured field in a destination BTF, allowing conditional logic to
handle incompatible differences between kernels.
Also introduce opt-in relaxed CO-RE relocation handling option, which
makes libbpf emit warning for failed relocations, but proceed with other
relocations. Instruction, for which relocation failed, is patched with
(u32)-1 value.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-4-andriin@fb.com
|
|
Refactor all the various bpf_object__open variations to ultimately
specify common bpf_object_open_opts struct. This makes it easy to keep
extending this common struct w/ extra parameters without having to
update all the legacy APIs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-3-andriin@fb.com
|
|
BTF offset reloc was generalized in recent Clang into field relocation,
capturing extra u32 field, specifying what aspect of captured field
needs to be relocated. This changes .BTF.ext's record size for this
relocation from 12 bytes to 16 bytes. Given these format changes
happened in Clang before official released version, it's ok to not
support outdated 12-byte record size w/o breaking ABI.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-2-andriin@fb.com
|
|
Pull virtio fixes from Michael Tsirkin:
"Some minor bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/test: stop device before reset
tools/virtio: xen stub
tools/virtio: more stubs
|
|
To get the changes in:
78f6face5af3 ("sched: add kernel-doc for struct clone_args")
f14c234b4bc5 ("clone3: switch to copy_struct_from_user()")
This file gets rebuilt, but no changes ensues:
CC /tmp/build/perf/trace/beauty/clone.o
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xqruu8wohwlbc57udg1g0xzx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
344c6c804703 ("KVM/Hyper-V: Add new KVM capability KVM_CAP_HYPERV_DIRECT_TLBFLUSH")
dee04eee9182 ("KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface")
These trigger the rebuild of this object:
CC /tmp/build/perf/trace/beauty/ioctl.o
But do not result in any change in tooling, as the additions are not
being used in any table generatator.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Anup Patel <Anup.Patel@wdc.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lkml.kernel.org/n/tip-d1v48a0qfoe98u5v9tn3mu5u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
0cb8410b90e7 ("kvm: svm: Intercept RDPRU")
That trigger a rebuild in too in tooling:
CC /tmp/build/perf/arch/x86/util/kvm-stat.o
But this time around no changes in tooling results, as SVM_EXIT_RDPRU
wasn't added to SVM_EXIT_REASONS, that is used in kvm-stat.c.
And addresses this perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/n/tip-pqzkt1hmfpqph3ts8i6zzmim@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
bf653b78f960 ("KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit")
That trigger these changes in tooling:
CC /tmp/build/perf/arch/x86/util/kvm-stat.o
INSTALL GTK UI
DESCEND plugins
make[3]: Nothing to be done for '/tmp/build/perf/plugins/libtraceevent-dynamic-list'.
INSTALL trace_plugins
LD /tmp/build/perf/arch/x86/util/perf-in.o
LD /tmp/build/perf/arch/x86/perf-in.o
LD /tmp/build/perf/arch/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
And this is not just because that header is included, kvm-stat.c
uses the VMX_EXIT_REASONS define and it got changed by the above cset.
And addresses this perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tao Xu <tao3.xu@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-gr1eel0hckmi5l3p2ewdpfxh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There is a memory leak problem in the failure paths of
build_cl_output(), so fix it.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/4d3c0178-5482-c313-98e1-f82090d2d456@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
slow_copyfile() opens the file by name, so "write" permissions must not
be removed in copyfile_mode_ns() before calling slow_copyfile().
Example:
Before:
$ sudo chmod +r /proc/kcore
$ sudo setcap "cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_sys_rawio=ep" tools/perf/perf
$ tools/perf/perf buildid-cache -k /proc/kcore
Couldn't add /proc/kcore
After:
$ sudo chmod +r /proc/kcore
$ sudo setcap "cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_sys_rawio=ep" tools/perf/perf
$ tools/perf/perf buildid-cache -v -k /proc/kcore
kcore added to build-id cache directory /home/ahunter/.debug/[kernel.kcore]/37e340b1b5a7cf4f57ba8de2bc777359588a957f/2019100709562289
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/20191007070221.11158-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Store SYMBOL_ANNOTATE_ERRNO__BPF_MISSING_BTF in variable *ret*, instead
of returning in the middle of the function and leaking multiple
resources: prog_linfo, btf, s and bfdf.
Addresses-Coverity-ID: 1454832 ("Structurally dead code")
Fixes: 11aad897f6d1 ("perf annotate: Don't return -1 for error when doing BPF disassembly")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191014171047.GA30850@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Both build_mem_topology() and rm_rf_depth_pat() have resource leaks of
closedir() on the error paths.
Fix this by calling closedir() before function returns.
Fixes: e2091cedd51b ("perf tools: Add MEM_TOPOLOGY feature to perf data file")
Fixes: cdb6b0235f17 ("perf tools: Add pattern name checking to rm_rf")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/cd5f7cd2-b80d-6add-20a1-32f4f43e0744@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In the earlier fix for the memory overrun of id arrays I managed to typo
the wrong event in the fix.
Of course we need to close the current event in the loop, not the
original failing event.
The same test case as in the original patch still passes.
Fixes: 7834fa948beb ("perf evlist: Fix access of freed id arrays")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191011182140.8353-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The build of file libperf-jvmti.so succeeds but the resulting
object fails to load:
# ~/linux/tools/perf/perf record -k mono -- java \
-XX:+PreserveFramePointer \
-agentpath:/root/linux/tools/perf/libperf-jvmti.so \
hog 100000 123450
Error occurred during initialization of VM
Could not find agent library /root/linux/tools/perf/libperf-jvmti.so
in absolute path, with error:
/root/linux/tools/perf/libperf-jvmti.so: undefined symbol: _ctype
Add the missing _ctype symbol into the build script.
Fixes: 79743bc927f6 ("perf jvmti: Link against tools/lib/string.o to have weak strlcpy()")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191008093841.59387-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-10-14
The following pull-request contains BPF updates for your *net-next* tree.
12 days of development and
85 files changed, 1889 insertions(+), 1020 deletions(-)
The main changes are:
1) auto-generation of bpf_helper_defs.h, from Andrii.
2) split of bpf_helpers.h into bpf_{helpers, helper_defs, endian, tracing}.h
and move into libbpf, from Andrii.
3) Track contents of read-only maps as scalars in the verifier, from Andrii.
4) small x86 JIT optimization, from Daniel.
5) cross compilation support, from Ivan.
6) bpf flow_dissector enhancements, from Jakub and Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes test module build.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Given lots of selftests won't work without recent enough Clang/LLVM that
fully supports BTF, there is no point in maintaining outdated BTF
support detection and fall-back to pahole logic. Just assume we have
everything we need.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011220146.3798961-3-andriin@fb.com
|
|
Given BPF programs rely on libbpf's bpf_helper_defs.h, which is
auto-generated during libbpf build, libbpf build has to happen before
we attempt progs/*.c build. Enforce it as order-only dependency.
Fixes: 24f25763d6de ("libbpf: auto-generate list of BPF helper definitions")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011220146.3798961-2-andriin@fb.com
|
|
In case of C/LDFLAGS there is no way to pass them correctly to build
command, for instance when --sysroot is used or external libraries
are used, like -lelf, wich can be absent in toolchain. This can be
used for samples/bpf cross-compiling allowing to get elf lib from
sysroot.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-13-ivan.khoronzhuk@linaro.org
|
|
No need to use C++ for test_libbpf target when libbpf is on C and it
can be tested with C, after this change the CXXFLAGS in makefiles can
be avoided, at least in bpf samples, when sysroot is used, passing
same C/LDFLAGS as for lib.
Add "return 0" in test_libbpf to avoid warn, but also remove spaces at
start of the lines to keep same style and avoid warns while apply.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-12-ivan.khoronzhuk@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also a couple of updates for new Intel
models (which are technically hw-enablement, but to users it's a fix
to perf behavior on those new CPUs - hope this is fine), an AUX
inheritance fix, event time-sharing fix, and a fix for lost non-perf
NMI events on AMD systems"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf/x86/cstate: Add Tiger Lake CPU support
perf/x86/msr: Add Tiger Lake CPU support
perf/x86/intel: Add Tiger Lake CPU support
perf/x86/cstate: Update C-state counters for Ice Lake
perf/x86/msr: Add new CPU model numbers for Ice Lake
perf/x86/cstate: Add Comet Lake CPU support
perf/x86/msr: Add Comet Lake CPU support
perf/x86/intel: Add Comet Lake CPU support
perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp
perf/core: Fix corner case in perf_rotate_context()
perf/core: Rework memory accounting in perf_mmap()
perf/core: Fix inheritance of aux_output groups
perf annotate: Don't return -1 for error when doing BPF disassembly
perf annotate: Return appropriate error code for allocation failures
perf annotate: Fix arch specific ->init() failure errors
perf annotate: Propagate the symbol__annotate() error return
perf annotate: Fix the signedness of failure returns
perf annotate: Propagate perf_env__arch() error
perf evsel: Fall back to global 'perf_env' in perf_evsel__env()
perf tools: Propagate get_cpuid() error
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix a kernel crash in spufs_create_root() on Cell machines, since the
new mount API went in.
Fix a regression in our KVM code caused by our recent PCR changes.
Avoid a warning message about a failing hypervisor API on systems that
don't have that API.
A couple of minor build fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Desnes A. Nunes do
Rosario, Emmanuel Nicolet, Jordan Niethe, Laurent Dufour, Stephen
Rothwell"
* tag 'powerpc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
spufs: fix a crash in spufs_create_root()
powerpc/kvm: Fix kvmppc_vcore->in_guest value in kvmhv_switch_to_host
selftests/powerpc: Fix compile error on tlbie_test due to newer gcc
powerpc/pseries: Remove confusing warning message.
powerpc/64s/radix: Fix build failure with RADIX_MMU=n
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2019-10-12
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) a bunch of small fixes. Nothing critical.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add basic tests to verify functionality of netdevsim reporters.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Old GCC versions are producing invalid typedef for __gnuc_va_list
pointing to void. Special-case this and emit valid:
typedef __builtin_va_list __gnuc_va_list;
Reported-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191011032901.452042-1-andriin@fb.com
|
|
Existing BPF_CORE_READ() macro generates slightly suboptimal code. If
there are intermediate pointers to be read, initial source pointer is
going to be assigned into a temporary variable and then temporary
variable is going to be uniformly used as a "source" pointer for all
intermediate pointer reads. Schematically (ignoring all the type casts),
BPF_CORE_READ(s, a, b, c) is expanded into:
({
const void *__t = src;
bpf_probe_read(&__t, sizeof(*__t), &__t->a);
bpf_probe_read(&__t, sizeof(*__t), &__t->b);
typeof(s->a->b->c) __r;
bpf_probe_read(&__r, sizeof(*__r), &__t->c);
})
This initial `__t = src` makes calls more uniform, but causes slightly
less optimal register usage sometimes when compiled with Clang. This can
cascase into, e.g., more register spills.
This patch fixes this issue by generating more optimal sequence:
({
const void *__t;
bpf_probe_read(&__t, sizeof(*__t), &src->a); /* <-- src here */
bpf_probe_read(&__t, sizeof(*__t), &__t->b);
typeof(s->a->b->c) __r;
bpf_probe_read(&__r, sizeof(*__r), &__t->c);
})
Fixes: 7db3822ab991 ("libbpf: Add BPF_CORE_READ/BPF_CORE_READ_INTO helpers")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191011023847.275936-1-andriin@fb.com
|
|
Make sure a new flow dissector program can be attached to replace the old
one with a single syscall. Also check that attaching the same program twice
is prohibited.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191011082946.22695-3-jakub@cloudflare.com
|
|
fix test module build.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Test virtual server via ipip tunnel.
Tested:
# selftests: netfilter: ipvs.sh
# Testing DR mode...
# Testing NAT mode...
# Testing Tunnel mode...
# ipvs.sh: PASS
ok 6 selftests: netfilter: ipvs.sh
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
|
|
Test virtual server via NAT.
Tested:
# selftests: netfilter: ipvs.sh
# Testing DR mode...
# Testing NAT mode...
# ipvs.sh: PASS
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
|
