| Age | Commit message (Collapse) | Author |
|---|
|
+WARNING: Possible comma where semicolon could be used
+#397: FILE: tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c:700:
++ tmr.type = KVM_XEN_VCPU_ATTR_TYPE_TIMER,
++ vcpu_ioctl(vm, VCPU_ID, KVM_XEN_VCPU_GET_ATTR, &tmr);
Fixes: 25eaeebe710c ("KVM: x86/xen: Add self tests for KVM_XEN_HVM_CONFIG_EVTCHN_SEND")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-4-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Merge branch for features that did not make it into 5.18:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The tsc_scaling_sync's binary should be present in the .gitignore
file for the git to ignore it.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The guest_hang() function is used as the default exception handler
for various KVM selftests applications by setting it's address in
the vstvec CSR. The vstvec CSR requires exception handler base address
to be at least 4-byte aligned so this patch fixes alignment of the
guest_hang() function.
Fixes: 3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Supporting hardware updates of PTE A and D bits is optional for any
RISC-V implementation so current software strategy is to always set
these bits in both G-stage (hypervisor) and VS-stage (guest kernel).
If PTE A and D bits are not set by software (hypervisor or guest)
then RISC-V implementations not supporting hardware updates of these
bits will cause traps even for perfectly valid PTEs.
Based on above explanation, the VS-stage page table created by various
KVM selftest applications is not correct because PTE A and D bits are
not set. This patch fixes VS-stage page table programming of PTE A and
D bits for KVM selftests.
Fixes: 3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
In order to correctly destroy a VM, all references to the VM must be
freed. The arch_timer selftest creates a VGIC for the guest, which
itself holds a reference to the VM.
Close the GIC FD when cleaning up a VM.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-4-oupton@google.com
|
|
dirty_log_perf_test instantiates a VGICv3 for the guest (if supported by
hardware) to reduce the overhead of guest exits. However, the test does
not actually close the GIC fd when cleaning up the VM between test
iterations, meaning that the VM is never actually destroyed in the
kernel.
While this is generally a bad idea, the bug was detected from the kernel
spewing about duplicate debugfs entries as subsequent VMs happen to
reuse the same FD even though the debugfs directory is still present.
Abstract away the notion of setup/cleanup of the GIC FD from the test
by creating arch-specific helpers for test setup/cleanup. Close the GIC
FD on VM cleanup and do nothing for the other architectures.
Fixes: c340f7899af6 ("KVM: selftests: Add vgic initialization for dirty log perf test for ARM")
Reviewed-by: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-3-oupton@google.com
|
|
When testing a kernel with commit a5905d6af492 ("KVM: arm64:
Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
get-reg-list output
vregs: Number blessed registers: 234
vregs: Number registers: 238
vregs: There are 1 new registers.
Consider adding them to the blessed reg list with the following lines:
KVM_REG_ARM_FW_REG(3),
vregs: PASS
...
That output inspired two changes: 1) add the new register to the
blessed list and 2) explain why "Number registers" is actually four
larger than "Number blessed registers" (on the system used for
testing), even though only one register is being stated as new.
The reason is that some registers are host dependent and they get
filtered out when comparing with the blessed list. The system
used for the test apparently had three filtered registers.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220316125129.392128-1-drjones@redhat.com
|
|
Introduce a test for aarch64 that ensures non-mixed-width vCPUs
(all 64bit vCPUs or all 32bit vcPUs) can be configured, and
mixed-width vCPUs cannot be configured.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220329031924.619453-3-reijiw@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20220225145304.36166-4-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add test cases for timers in the past, and reading the status of a timer
which has already fired.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20220309143835.253911-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Test a combination of event channel send, poll and timer operations.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20220303154127.202856-18-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add support for SCHEDOP_poll hypercall.
This implementation is optimized for polling for a single channel, which
is what Linux does. Polling for multiple channels is not especially
efficient (and has not been tested).
PV spinlocks slow path uses this hypercall, and explicitly crash if it's
not supported.
[ dwmw2: Rework to use kvm_vcpu_halt(), not supported for 32-bit guests ]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-17-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a test that asserts KVM rewrites guest hypercall instructions to
match the running architecture (VMCALL on VMX, VMMCALL on SVM).
Additionally, test that with the quirk disabled, KVM no longer rewrites
guest instructions and instead injects a #UD.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220316005538.2282772-3-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Convert the tracepoint.py file to python3 as many of the files in
tools/perf are already written in python3.
Committer testing:
# export PYTHONPATH=/tmp/build/perf/python/
# python3 ~acme/git/perf/tools/perf/python/tracepoint.py | head
time 67394457376909 prev_comm=swapper/12 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=gnome-terminal- next_pid=3313 next_prio=120
time 67394457807669 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457811859 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457824929 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457831899 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457842299 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457844179 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457853879 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457856339 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457865659 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
Traceback (most recent call last):
File "/var/home/acme/git/perf/tools/perf/python/tracepoint.py", line 48, in <module>
main()
File "/var/home/acme/git/perf/tools/perf/python/tracepoint.py", line 37, in main
print("time %u prev_comm=%s prev_pid=%d prev_prio=%d prev_state=0x%x ==> next_comm=%s next_pid=%d next_prio=%d" % (
BrokenPipeError: [Errno 32] Broken pipe
#
Signed-off-by: Tanu M <tanu235m@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/linux-perf-users/CAPS78prawYzRZnyhWjgOnGw4EwoswNwztvfZFdCOPOydFzVwzQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Addresses this coccinelle warning:
./tools/perf/util/evlist.c:1333:5-8: Unneeded variable: "err". Return
"- ENOMEM" on line 1358
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/1648432532-23151-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_cpu_map__merge() will reuse one of its arguments if they are equal or
the other argument is NULL.
The arguments could be reused if it is known one set of values is a
subset of the other.
For example, a map of 0-1 and a map of just 0 when merged yields the map
of 0-1.
Currently a new map is created rather than adding a reference count to
the original 0-1 map.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220328232648.2127340-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Returns true if the second argument is a subset of the first.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220328232648.2127340-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
evlist contains cpus and all_cpus. all_cpus is the union of the cpu maps
of all evsels.
For non-task targets, cpus is set to be cpus requested from the command
line, defaulting to all online cpus if no cpus are specified.
For an uncore event, all_cpus may be just CPU 0 or every online CPU.
This causes all_cpus to have fewer values than the cpus variable which
is confusing given the 'all' in the name.
To try to make the behavior clearer, rename cpus to user_requested_cpus
and add comments on the two struct variables.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220328232648.2127340-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This essentially reverts commit c72e3f04b45fb2e5 ("tools/perf/build:
Speed up git-version test on re-make") and commit 4e666cdb06eede20
("perf tools: Fix dependency for version file creation")
In commit c72e3f04b45fb2e5 ("tools/perf/build: Speed up git-version test
on re-make"), a makefile dependency on .git/HEAD was added. The
background is that running PERF-VERSION-FILE is relatively slow, and
commands like "git describe" are particularly slow.
In commit 4e666cdb06eede20 ("perf tools: Fix dependency for version file
creation"), an additional dependency on .git/ORIG_HEAD was added, as
.git/HEAD may not change for "git reset --hard HEAD^" command. However,
depending on whether we're on a branch or not, a "git cherry-pick" may
not lead to the version being updated.
As discussed with the git community in [0], using git internal files for
dependencies is not reliable. Commit 4e666cdb06ee also breaks some build
scenarios [1].
As mentioned, c72e3f04b45fb2e5 ("tools/perf/build: Speed up git-version
test on re-make") was added to speed up the build. However in commit
7572733b84997d23 ("perf tools: Fix version kernel tag") we removed the
call to "git describe", so just revert Makefile.perf back to same as pre
c72e3f04b45fb2e5 ("tools/perf/build: Speed up git-version test on
re-make") and the build should not be so slow, as below:
Pre 7572733b8499:
$> time util/PERF-VERSION-GEN
PERF_VERSION = 5.17.rc8.g4e666cdb06ee
real 0m0.110s
user 0m0.091s
sys 0m0.019s
Post 7572733b8499:
$> time util/PERF-VERSION-GEN
PERF_VERSION = 5.17.rc8.g7572733b8499
real 0m0.039s
user 0m0.036s
sys 0m0.007s
[0] https://lore.kernel.org/git/87wngkpddp.fsf@igel.home/T/#m4a4dd6de52fdbe21179306cd57b3761eb07f45f8
[1] https://lore.kernel.org/linux-perf-users/20220329093120.4173283-1-matthieu.baerts@tessares.net/T/#u
Committer testing:
After a fresh rebuild using 'make -C tools/perf O=/tmp/build/perf install-bin':
$ perf -v
perf version 5.17.g162f9db407b6
$ git log --oneline -1
162f9db407b6a6e5 (HEAD -> perf/core) perf tools: Stop depending on .git files for building PERF-VERSION-FILE
$
Now using a detached tarball, i.e. outside the kernel source tree:
$ ls -la perf*tar
ls: cannot access 'perf*tar': No such file or directory
$ make perf-tar-src-pkg
TAR
PERF_VERSION = 5.17.g31d10b3ef133
$ ls -la perf*tar
-rw-r--r--. 1 acme acme 22241280 Mar 30 13:26 perf-5.17.0.tar
$ mv perf-5.17.0.tar /tmp
$ cd /tmp
$ tar xf perf-5.17.0.tar
$ cd perf-5.17.0/
$ make -C tools/perf |& tail
CC util/pmu.o
CC util/pmu-flex.o
CC util/expr-flex.o
CC util/expr.o
LD util/scripting-engines/perf-in.o
LD util/intel-pt-decoder/perf-in.o
LD util/perf-in.o
LD perf-in.o
LINK perf
make: Leaving directory '/tmp/perf-5.17.0/tools/perf'
$ tools/perf/perf -v
perf version 5.17.g31d10b3ef133
$ pwd
/tmp/perf-5.17.0
$ cat PERF-VERSION-FILE
#define PERF_VERSION "5.17.g31d10b3ef133"
$
Fixes: 4e666cdb06eede20 ("perf tools: Fix dependency for version file creation")
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1648635774-14581-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
991625f3dd2cbc4b ("x86/ibt: Add IBT feature, MSR and #CP handling")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YkSCx2kr4ambH+Qe@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
caa574ffc4aaf4f2 ("drm/i915/uapi: document behaviour for DG2 64K support")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://lore.kernel.org/lkml/YkSChHqaOApscFQ0@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
6d8491910fcd3324 ("KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2")
ef11c9463ae00630 ("KVM: s390: Add vm IOCTL for key checked guest absolute memory access")
e9e9feebcbc14b17 ("KVM: s390: Add optional storage key checking to MEMOP IOCTL")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/YkSCOWHQdir1lhdJ@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
34739fd95fab3a5e ("KVM: arm64: Indicate SYSTEM_RESET2 in kvm_run::system_event flags field")
583cda1b0e7d5d49 ("KVM: arm64: Refuse to run VCPU if the PMU doesn't match the physical CPU")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/lkml/YkSB4Q7kWmnaqeZU@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
991625f3dd2cbc4b ("x86/ibt: Add IBT feature, MSR and #CP handling")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2022-03-29 16:23:07.678740040 -0300
+++ after 2022-03-29 16:23:16.960978524 -0300
@@ -220,6 +220,13 @@
[0x00000669] = "MC6_DEMOTION_POLICY_CONFIG",
[0x00000680] = "LBR_NHM_FROM",
[0x00000690] = "CORE_PERF_LIMIT_REASONS",
+ [0x000006a0] = "IA32_U_CET",
+ [0x000006a2] = "IA32_S_CET",
+ [0x000006a4] = "IA32_PL0_SSP",
+ [0x000006a5] = "IA32_PL1_SSP",
+ [0x000006a6] = "IA32_PL2_SSP",
+ [0x000006a7] = "IA32_PL3_SSP",
+ [0x000006a8] = "IA32_INT_SSP_TAB",
[0x000006B0] = "GFX_PERF_LIMIT_REASONS",
[0x000006B1] = "RING_PERF_LIMIT_REASONS",
[0x000006c0] = "LBR_NHM_TO",
$
And this gets rebuilt:
CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
LD /tmp/build/perf/trace/beauty/perf-in.o
CC /tmp/build/perf/util/amd-sample-raw.o
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
Now one can trace systemwide asking to see backtraces to where those
MSRs are being read/written with:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
^C#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
Using CPUID AuthenticAMD-25-21-0
0x6a0
0x6a8
New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
0x6a0
0x6a8
New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/YkNd7Ky+vi7H2Zl2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
9457056ac426e5ed ("mm: madvise: MADV_DONTNEED_LOCKED")
That result in these changes in the tools:
$ diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
--- tools/include/uapi/asm-generic/mman-common.h 2022-03-29 16:17:50.461694991 -0300
+++ include/uapi/asm-generic/mman-common.h 2022-03-27 19:12:48.923250468 -0300
@@ -75,6 +75,8 @@
#define MADV_POPULATE_READ 22 /* populate (prefault) page tables readable */
#define MADV_POPULATE_WRITE 23 /* populate (prefault) page tables writable */
+#define MADV_DONTNEED_LOCKED 24 /* like DONTNEED, but drop locked pages too */
+
/* compatibility flags */
#define MAP_FILE 0
$ tools/perf/trace/beauty/madvise_behavior.sh > before
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ tools/perf/trace/beauty/madvise_behavior.sh > after
$ diff -u before after
--- before 2022-03-29 16:18:04.091044244 -0300
+++ after 2022-03-29 16:18:11.692238906 -0300
@@ -20,6 +20,7 @@
[21] = "PAGEOUT",
[22] = "POPULATE_READ",
[23] = "POPULATE_WRITE",
+ [24] = "DONTNEED_LOCKED",
[100] = "HWPOISON",
[101] = "SOFT_OFFLINE",
};
$
I.e. now when madvise gets those behaviours as args, 'perf trace' will
be able to translate from the number to a human readable string and to
use the strings in tracepoint filter expressions.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YkNcUfeh795yqGMV@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
a6a6fe27bab48f0d ("net/smc: Dynamic control handshake limitation by socket options")
This automagically adds support for the SOL_MNC socket level:
$ diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
--- tools/perf/trace/beauty/include/linux/socket.h 2022-03-14 17:55:22.277148656 -0300
+++ include/linux/socket.h 2022-03-27 19:12:48.908250063 -0300
@@ -366,6 +366,7 @@
#define SOL_XDP 283
#define SOL_MPTCP 284
#define SOL_MCTP 285
+#define SOL_SMC 286
/* IPX options */
#define IPX_TYPE 1
$ tools/perf/trace/beauty/socket.sh > before
$ cp include/linux/socket.h tools/perf/trace/beauty/include/linux/socket.h
$ tools/perf/trace/beauty/socket.sh > after
$ diff -u before after
--- before 2022-03-29 11:47:56.390258780 -0300
+++ after 2022-03-29 11:48:03.158436189 -0300
@@ -67,6 +67,7 @@
[283] = "XDP",
[284] = "MPTCP",
[285] = "MCTP",
+ [286] = "SMC",
};
DEFINE_STRARRAY(socket_level, "SOL_");
$
This will allow 'perf trace' to translate 286 into "SMC" as is done with
the other socket levels:
# perf trace -e setsockopt --max-events 4
344.916 ( 0.003 ms): Socket Thread/3816 setsockopt(fd: 168, level: TCP, optname: 5, optval: 0x7f5797b9c4f8, optlen: 4) = 0
344.920 ( 0.002 ms): Socket Thread/3816 setsockopt(fd: 168, level: TCP, optname: 6, optval: 0x7f5797b9c4f4, optlen: 4) = 0
1246.974 ( 0.010 ms): systemd-resolv/1128 setsockopt(fd: 22, level: IP, optname: 11, optval: 0x7ffc96cd7244, optlen: 4) = 0
1246.986 ( 0.002 ms): systemd-resolv/1128 setsockopt(fd: 22, level: IP, optname: 8, optval: 0x7ffc96cd7264, optlen: 4) = 0
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: D. Wythe <alibuda@linux.alibaba.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YkMdpzzjPu5VZtW3@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
fba60b171a032283 ("libbpf: Use IS_ERR_OR_NULL() in hashmap__free()")
That don't entail any changes in tools/perf.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Not a kernel ABI, its just that this uses the mechanism in place for
checking kernel ABI files drift.
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mauricio Vásquez <mauricio@kinvolk.io>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YkMb2SAIai2VeuUD@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Passing NULL to perf_cpu_map__max doesn't make sense as there is no
valid max. Avoid this problem by null checking in
perf_stat_init_aggr_mode.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220328062414.1893550-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -c option is used to cull by stacktrace. Now, --cull option has
been Added in page_owner_sort.c. Culling by stacktrace is one of the
function of "--cull". No need to set an extra parameter. So remove -c
option.
Remove parsing of -c when parse parameter and remove "-c" from usage.
This work is coauthored by
Shenghong Han
Yixuan Cao
Chongxi Zhao
Jiajian Ye
Yuhong Feng
Yongqiang Liu
Link: https://lkml.kernel.org/r/20220326085920.1470081-1-zhangyinan2019@email.szu.edu.cn
Signed-off-by: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull virtio updates from Michael Tsirkin:
- vdpa generic device type support
- more virtio hardening for broken devices (but on the same theme,
revert some virtio hotplug hardening patches - they were misusing
some interrupt flags and had to be reverted)
- RSS support in virtio-net
- max device MTU support in mlx5 vdpa
- akcipher support in virtio-crypto
- shared IRQ support in ifcvf vdpa
- a minor performance improvement in vhost
- enable virtio mem for ARM64
- beginnings of advance dma support
- cleanups, fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits)
vdpa/mlx5: Avoid processing works if workqueue was destroyed
vhost: handle error while adding split ranges to iotlb
vdpa: support exposing the count of vqs to userspace
vdpa: change the type of nvqs to u32
vdpa: support exposing the config size to userspace
vdpa/mlx5: re-create forwarding rules after mac modified
virtio: pci: check bar values read from virtio config space
Revert "virtio_pci: harden MSI-X interrupts"
Revert "virtio-pci: harden INTX interrupts"
drivers/net/virtio_net: Added RSS hash report control.
drivers/net/virtio_net: Added RSS hash report.
drivers/net/virtio_net: Added basic RSS support.
drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.
virtio: use virtio_device_ready() in virtio_device_restore()
tools/virtio: compile with -pthread
tools/virtio: fix after premapped buf support
virtio_ring: remove flags check for unmap packed indirect desc
virtio_ring: remove flags check for unmap split indirect desc
virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed()
net/mlx5: Add support for configuring max device MTU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking updates from Jakub Kicinski:
"Networking fixes and rethook patches.
Features:
- kprobes: rethook: x86: replace kretprobe trampoline with rethook
Current release - regressions:
- sfc: avoid null-deref on systems without NUMA awareness in the new
queue sizing code
Current release - new code bugs:
- vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices
- eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl when
interface is down
Previous releases - always broken:
- openvswitch: correct neighbor discovery target mask field in the
flow dump
- wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak
- rxrpc: fix call timer start racing with call destruction
- rxrpc: fix null-deref when security type is rxrpc_no_security
- can: fix UAF bugs around echo skbs in multiple drivers
Misc:
- docs: move netdev-FAQ to the 'process' section of the
documentation"
* tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
vxlan: do not feed vxlan_vnifilter_dump_dev with non vxlan devices
openvswitch: Add recirc_id to recirc warning
rxrpc: fix some null-ptr-deref bugs in server_key.c
rxrpc: Fix call timer start racing with call destruction
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
net: hns3: fix the concurrency between functions reading debugfs
docs: netdev: move the netdev-FAQ to the process pages
docs: netdev: broaden the new vs old code formatting guidelines
docs: netdev: call out the merge window in tag checking
docs: netdev: add missing back ticks
docs: netdev: make the testing requirement more stringent
docs: netdev: add a question about re-posting frequency
docs: netdev: rephrase the 'should I update patchwork' question
docs: netdev: rephrase the 'Under review' question
docs: netdev: shorten the name and mention msgid for patch status
docs: netdev: note that RFC postings are allowed any time
docs: netdev: turn the net-next closed into a Warning
docs: netdev: move the patch marking section up
docs: netdev: minor reword
docs: netdev: replace references to old archives
...
|
|
The LLVM make variable allows a developer to quickly switch between the
GNU and LLVM tools. However, it does not handle versioned binaries, such
as the ones shipped by Debian, as LLVM=1 just defines the tool variables
with the unversioned binaries.
There was some discussion during the review of the patch that introduces
LLVM=1 around versioned binaries, ultimately coming to the conclusion
that developers can just add the folder that contains the unversioned
binaries to their PATH, as Debian's versioned suffixed binaries are
really just symlinks to the unversioned binaries in /usr/lib/llvm-#/bin:
$ realpath /usr/bin/clang-14
/usr/lib/llvm-14/bin/clang
$ PATH=/usr/lib/llvm-14/bin:$PATH make ... LLVM=1
However, that can be cumbersome to developers who are constantly testing
series with different toolchains and versions. It is simple enough to
support these versioned binaries directly in the Kbuild system by
allowing the developer to specify the version suffix with LLVM=, which
is shorter than the above suggestion:
$ make ... LLVM=-14
It does not change the meaning of LLVM=1 (which will continue to use
unversioned binaries) and it does not add too much additional complexity
to the existing $(LLVM) code, while allowing developers to quickly test
their series with different versions of the whole LLVM suite of tools.
Some developers may build LLVM from source but not add the binaries to
their PATH, as they may not want to use that toolchain systemwide.
Support those developers by allowing them to supply the directory that
the LLVM tools are available in, as it is no more complex to support
than the version suffix change above.
$ make ... LLVM=/path/to/llvm/
Update and reorder the documentation to reflect these new additions.
At the same time, notate that LLVM=0 is not the same as just omitting it
altogether, which has confused people in the past.
Link: https://lore.kernel.org/r/20200317215515.226917-1-ndesaulniers@google.com/
Link: https://lore.kernel.org/r/20220224151322.072632223@infradead.org/
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The seed_rng() function was written to work across lots of old kernels,
back when WireGuard used a big compatibility layer. Now that things have
evolved, we can vastly simplify this, by just marking the RNG as seeded.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The update for this cycle includes the deprecation of block-aperture
mode and a new perf events interface for the papr_scm nvdimm driver.
The perf events approach was acked by PeterZ.
- Add perf support for nvdimm events, initially only for 'papr_scm'
devices.
- Deprecate the 'block aperture' support in libnvdimm, it only ever
existed in the specification, not in shipping product"
* tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/blk: Fix title level
MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER
powerpc/papr_scm: Fix build failure when
drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set
nvdimm/region: Delete nd_blk_region infrastructure
ACPI: NFIT: Remove block aperture support
nvdimm/namespace: Delete nd_namespace_blk
nvdimm/namespace: Delete blk namespace consideration in shared paths
nvdimm/blk: Delete the block-aperture window driver
nvdimm/region: Fix default alignment for small regions
docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu
powerpc/papr_scm: Add perf interface support
drivers/nvdimm: Add perf interface to expose nvdimm performance stats
drivers/nvdimm: Add nvdimm pmu structure
|
|
Pull dma-mapping updates from Christoph Hellwig:
- do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)
- fix return value of dma-debug __setup handlers (Randy Dunlap)
- swiotlb cleanups (Robin Murphy)
- remove most remaining users of the pci-dma-compat.h API
(Christophe JAILLET)
- share the ABI header for the DMA map_benchmark with userspace
(Tian Tao)
- update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)
- remove CONFIG_DMA_REMAP (me)
* tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: benchmark: extract a common header file for map_benchmark definition
dma-debug: fix return value of __setup handlers
dma-mapping: remove CONFIG_DMA_REMAP
media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API
rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API
sparc: Remove usage of the deprecated "pci-dma-compat.h" API
agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API
alpha: Remove usage of the deprecated "pci-dma-compat.h" API
MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK
swiotlb: simplify array allocation
swiotlb: tidy up includes
swiotlb: simplify debugfs setup
swiotlb: do not zero buffer in set_memory_decrypted()
|
|
llvm upstream patch ([1]) added to issue warning for code like
void test() {
int j = 0;
for (int i = 0; i < 1000; i++)
j++;
return;
}
This triggered several errors in selftests/bpf build since
compilation flag -Werror is used.
...
test_lpm_map.c:212:15: error: variable 'n_matches' set but not used [-Werror,-Wunused-but-set-variable]
size_t i, j, n_matches, n_matches_after_delete, n_nodes, n_lookups;
^
test_lpm_map.c:212:26: error: variable 'n_matches_after_delete' set but not used [-Werror,-Wunused-but-set-variable]
size_t i, j, n_matches, n_matches_after_delete, n_nodes, n_lookups;
^
...
prog_tests/get_stack_raw_tp.c:32:15: error: variable 'cnt' set but not used [-Werror,-Wunused-but-set-variable]
static __u64 cnt;
^
...
For test_lpm_map.c, 'n_matches'/'n_matches_after_delete' are changed to be volatile
in order to silent the warning. I didn't remove these two declarations since
they are referenced in a commented code which might be used by people in certain
cases. For get_stack_raw_tp.c, the variable 'cnt' is removed.
[1] https://reviews.llvm.org/D122271
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220325200304.2915588-1-yhs@fb.com
|
|
Arnaldo reported perf compilation fail with:
$ make -k BUILD_BPF_SKEL=1 CORESIGHT=1 PYTHON=python3
...
In file included from util/bpf_counter.c:28:
/tmp/build/perf//util/bpf_skel/bperf_leader.skel.h: In function ‘bperf_leader_bpf__assert’:
/tmp/build/perf//util/bpf_skel/bperf_leader.skel.h:351:51: error: unused parameter ‘s’ [-Werror=unused-parameter]
351 | bperf_leader_bpf__assert(struct bperf_leader_bpf *s)
| ~~~~~~~~~~~~~~~~~~~~~~~~~^
cc1: all warnings being treated as errors
If there's nothing to generate in the new assert function,
we will get unused 's' warn/error, adding 'unused' attribute to it.
Fixes: 08d4dba6ae77 ("bpftool: Bpf skeletons assert type sizes")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20220328083703.2880079-1-jolsa@kernel.org
|
|
14c174633f34 ("random: remove unused tracepoints") removed all the
tracepoints from drivers/char/random.c, one of which,
random:urandom_read, was used by stacktrace_build_id selftest to trigger
stack trace capture.
Fix breakage by switching to kprobing urandom_read() function.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220325225643.2606-1-andrii@kernel.org
|
|
Commit ee2a098851bf missed updating the comments for helper bpf_get_stack
in tools/include/uapi/linux/bpf.h. Sync it.
Fixes: ee2a098851bf ("bpf: Adjust BPF stack helper functions to accommodate skip > 0")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/ce54617746b7ed5e9ba3b844e55e74cb8a60e0b5.1648110794.git.geliang.tang@suse.com
|
|
In [1], we added a kconfig knob that can set
/proc/sys/kernel/unprivileged_bpf_disabled to 2
We now check against this value in bpftool feature probe
[1] https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.net
Signed-off-by: Milan Landaverde <milan@mdaverde.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20220322145012.1315376-1-milan@mdaverde.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- llc: only change llc->dev when bind() succeeds, fix null-deref
Current release - new code bugs:
- smc: fix a memory leak in smc_sysctl_net_exit()
- dsa: realtek: make interface drivers depend on OF
Previous releases - regressions:
- sched: act_ct: fix ref leak when switching zones
Previous releases - always broken:
- netfilter: egress: report interface as outgoing
- vsock/virtio: enable VQs early on probe and finish the setup before
using them
Misc:
- memcg: enable accounting for nft objects"
* tag 'net-5.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (39 commits)
Revert "selftests: net: Add tls config dependency for tls selftests"
net/smc: Send out the remaining data in sndbuf before close
net: move net_unlink_todo() out of the header
net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
net: bnxt_ptp: fix compilation error
selftests: net: Add tls config dependency for tls selftests
memcg: enable accounting for nft objects
net/sched: act_ct: fix ref leak when switching zones
net/smc: fix a memory leak in smc_sysctl_net_exit()
selftests: tls: skip cmsg_to_pipe tests with TLS=n
octeontx2-af: initialize action variable
net: sparx5: switchdev: fix possible NULL pointer dereference
net/x25: Fix null-ptr-deref caused by x25_disconnect
qlcnic: dcb: default to returning -EOPNOTSUPP
net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL
net: hns3: fix phy can not link up when autoneg off and reset
net: hns3: add NULL pointer check for hns3_set/get_ringparam()
net: hns3: add netdev reset check for hns3_set_tunable()
net: hns3: clean residual vf config after disable sriov
net: hns3: add max order judgement for tx spare buffer
...
|
|
This reverts commit d9142e1cf3bbdaf21337767114ecab26fe702d47.
The test is supposed to run cleanly with TLS is disabled,
to test compatibility with TCP behavior. I can't repro
the failure [1], the problem should be debugged rather
than papered over.
Link: https://lore.kernel.org/all/20220325161203.7000698c@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1]
Fixes: d9142e1cf3bb ("selftests: net: Add tls config dependency for tls selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220328212904.2685395-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Forced transitions block only to-be-removed livepatches [Chengming]
- Detect when ftrace handler could not be disabled in self-tests [David]
- Calm down warning from a static analyzer [Tom]
* tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Reorder to use before freeing a pointer
livepatch: Don't block removal of patches that are safe to unload
livepatch: Skip livepatch tests if ftrace cannot be configured
|
|
When using pthreads, one has to compile and link with -lpthread,
otherwise e.g. glibc is not guaranteed to be reentrant.
This replaces -lpthread.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
|
|
selftest net tls test cases need TLS=m without this the test hangs.
Enabling config TLS solves this problem and runs to complete.
- CONFIG_TLS=m
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
