summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2021-06-08selftests: devlink_lib: Fix bouncing of netdevsim DEVLINK_DEVPetr Machata
In the commit referenced below, a check was added to devlink_lib that asserts the existence of a devlink device referenced by $DEVLINK_DEV. Unfortunately, several netdevsim tests point DEVLINK_DEV at a device that does not exist at the time that devlink_lib is sourced. Thus these tests spuriously fail. Fix this by introducing an override. By setting DEVLINK_DEV to an empty string, the user declares their intention to handle DEVLINK_DEV management on their own. In all netdevsim tests that use devlink_lib and set DEVLINK_DEV, set instead an empty DEVLINK_DEV just before sourcing devlink_lib, and set it to the correct value right afterwards. Fixes: 557c4d2f780c ("selftests: devlink_lib: add check for devlink device existence") Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08selftests: Clean forgotten resources as part of cleanup()Amit Cohen
Several tests do not set some ports down as part of their cleanup(), resulting in IPv6 link-local addresses and associated routes not being deleted. These leaks were found using a BPF tool that monitors ASIC resources. Solve this by setting the ports down at the end of the tests. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08selftests: router_scale: Do not count failed routesAmit Cohen
To check how many routes are installed in hardware, the test runs "ip route" and greps for "offload", which includes routes with state "offload_failed". Till now, this wrong check was not found because after one failure in route insertion, the driver moved to "abort" mode, which means that user cannot try to add more routes. The previous patch removed the abort mechanism and now failed routes are counted as offloaded. Fix this by not considering routes with "offload_failed" flag as offloaded. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08tools/bootconfig: Fix a build error accroding to undefined fallthroughMasami Hiramatsu
Since the "fallthrough" is defined only in the kernel, building lib/bootconfig.c as a part of user-space tools causes a build error. Add a dummy fallthrough to avoid the build error. Link: https://lkml.kernel.org/r/162087519356.442660.11385099982318160180.stgit@devnote2 Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Fixes: 4c1ca831adb1 ("Revert "lib: Revert use of fallthrough pseudo-keyword in lib/"") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-08tools/bootconfig: Fix error return code in apply_xbc()Zhen Lei
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Link: https://lkml.kernel.org/r/20210508034216.2277-1-thunder.leizhen@huawei.com Fixes: a995e6bc0524 ("tools/bootconfig: Fix to check the write failure correctly") Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-08selftests, bpf: Make docs tests fail more reliablyJoe Stringer
Previously, if rst2man caught errors, then these would be ignored and the output file would be written anyway. This would allow developers to introduce regressions in the docs comments in the BPF headers. Additionally, even if you instruct rst2man to fail out, it will still write out to the destination target file, so if you ran the tests twice in a row it would always pass. Use a temporary file for the initial run to ensure that if rst2man fails out under "--strict" mode, subsequent runs will not automatically pass. Tested via ./tools/testing/selftests/bpf/test_doc_build.sh Signed-off-by: Joe Stringer <joe@cilium.io> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20210608015756.340385-1-joe@cilium.io
2021-06-08libbpf: Fix pr_warn type warnings on 32bitMichal Suchanek
The printed value is ptrdiff_t and is formatted wiht %ld. This works on 64bit but produces a warning on 32bit. Fix the format specifier to %td. Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210604112448.32297-1-msuchanek@suse.de
2021-06-08tools/bpftool: Fix cross-buildJean-Philippe Brucker
When the bootstrap and final bpftool have different architectures, we need to build two distinct disasm.o objects. Add a recipe for the bootstrap disasm.o. After commit d510296d331a ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.") cross-building bpftool didn't work anymore, because the bootstrap bpftool was linked using objects from different architectures: $ make O=/tmp/bpftool ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -C tools/bpf/bpftool/ V=1 [...] aarch64-linux-gnu-gcc ... -c -MMD -o /tmp/bpftool/disasm.o /home/z/src/linux/kernel/bpf/disasm.c gcc ... -c -MMD -o /tmp/bpftool//bootstrap/main.o main.c gcc ... -o /tmp/bpftool//bootstrap/bpftool /tmp/bpftool//bootstrap/main.o ... /tmp/bpftool/disasm.o /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: /tmp/bpftool/disasm.o: error adding symbols: file in wrong format collect2: error: ld returned 1 exit status [...] The final bpftool was built for e.g. arm64, while the bootstrap bpftool, executed on the host, was built for x86. The problem here was that disasm.o linked into the bootstrap bpftool was arm64 rather than x86. With the fix we build two disasm.o, one for the target bpftool in arm64, and one for the bootstrap bpftool in x86. Fixes: d510296d331a ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210603170515.1854642-1-jean-philippe@linaro.org
2021-06-08selftests: kvm: Add support for customized slot0 memory sizeZhenzhong Duan
Until commit 39fe2fc96694 ("selftests: kvm: make allocation of extra memory take effect", 2021-05-27), parameter extra_mem_pages was used only to calculate the page table size for all the memory chunks, because real memory allocation happened with calls of vm_userspace_mem_region_add() after vm_create_default(). Commit 39fe2fc96694 however changed the meaning of extra_mem_pages to the size of memory slot 0. This makes the memory allocation more flexible, but makes it harder to account for the number of pages needed for the page tables. For example, memslot_perf_test has a small amount of memory in slot 0 but a lot in other slots, and adding that memory twice (both in slot 0 and with later calls to vm_userspace_mem_region_add()) causes an error that was fixed in commit 000ac4295339 ("selftests: kvm: fix overlapping addresses in memslot_perf_test", 2021-05-29) Since both uses are sensible, add a new parameter slot0_mem_pages to vm_create_with_vcpus() and some comments to clarify the meaning of slot0_mem_pages and extra_mem_pages. With this change, memslot_perf_test can go back to passing the number of memory pages as extra_mem_pages. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Message-Id: <20210608233816.423958-4-zhenzhong.duan@intel.com> [Squashed in a single patch and rewrote the commit message. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-08KVM: selftests: introduce P47V64 for s390xChristian Borntraeger
s390x can have up to 47bits of physical guest and 64bits of virtual address bits. Add a new address mode to avoid errors of testcases going beyond 47bits. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20210608123954.10991-1-borntraeger@de.ibm.com> Fixes: ef4c9f4f6546 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()") Cc: stable@vger.kernel.org Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-07libbpf: Fixes incorrect rx_ring_setup_doneKev Jackson
When calling xsk_socket__create_shared(), the logic at line 1097 marks a boolean flag true within the xsk_umem structure to track setup progress in order to support multiple calls to the function. However, instead of marking umem->tx_ring_setup_done, the code incorrectly sets umem->rx_ring_setup_done. This leads to improper behaviour when creating and destroying xsk and umem structures. Multiple calls to this function is documented as supported. Fixes: ca7a83e2487a ("libbpf: Only create rx and tx XDP rings when necessary") Signed-off-by: Kev Jackson <foamdino@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/YL4aU4f3Aaik7CN0@linux-dev
2021-06-07Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Bug fixes overlapping feature additions and refactoring, mostly. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "13 patches. Subsystems affected by this patch series: mips, mm (kfence, debug, pagealloc, memory-hotplug, hugetlb, kasan, and hugetlb), init, proc, lib, ocfs2, and mailmap" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: use private address for Michel Lespinasse ocfs2: fix data corruption by fallocate lib: crc64: fix kernel-doc warning mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY mm/kasan/init.c: fix doc warning proc: add .gitignore for proc-subset-pid selftest hugetlb: pass head page to remove_hugetlb_page() drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64 mm/page_alloc: fix counting of free pages after take off from buddy mm/debug_vm_pgtable: fix alignment for pmd/pud_advanced_tests() pid: take a reference when initializing `cad_pid` kfence: use TASK_IDLE when awaiting allocation Revert "MIPS: make userspace mapping young by default"
2021-06-05proc: add .gitignore for proc-subset-pid selftestDavid Matlack
This new selftest needs an entry in the .gitignore file otherwise git will try to track the binary. Link: https://lkml.kernel.org/r/20210601164305.11776-1-dmatlack@google.com Fixes: 268af17ada5855 ("selftests: proc: test subset=pid") Signed-off-by: David Matlack <dmatlack@google.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-04Merge tag 'net-5.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from bpf, wireless, netfilter and wireguard trees. The bpf vs lockdown+audit fix is the most notable. Things haven't slowed down just yet, both in terms of regressions in current release and largish fixes for older code, but we usually see a slowdown only after -rc5. Current release - regressions: - virtio-net: fix page faults and crashes when XDP is enabled - mlx5e: fix HW timestamping with CQE compression, and make sure they are only allowed to coexist with capable devices - stmmac: - fix kernel panic due to NULL pointer dereference of mdio_bus_data - fix double clk unprepare when no PHY device is connected Current release - new code bugs: - mt76: a few fixes for the recent MT7921 devices and runtime power management Previous releases - regressions: - ice: - track AF_XDP ZC enabled queues in bitmap to fix copy mode Tx - fix allowing VF to request more/less queues via virtchnl - correct supported and advertised autoneg by using PHY capabilities - allow all LLDP packets from PF to Tx - kbuild: quote OBJCOPY var to avoid a pahole call break the build Previous releases - always broken: - bpf, lockdown, audit: fix buggy SELinux lockdown permission checks - mt76: address the recent FragAttack vulnerabilities not covered by generic fixes - ipv6: fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions - Bluetooth: - fix the erroneous flush_work() order, to avoid double free - use correct lock to prevent UAF of hdev object - nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect - ieee802154: multiple fixes to error checking and return values - igb: fix XDP with PTP enabled - intel: add correct exception tracing for XDP - tls: fix use-after-free when TLS offload device goes down and back up - ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service - netfilter: nft_ct: skip expectations for confirmed conntrack - mptcp: fix falling back to TCP in presence of out of order packets early in connection lifetime - wireguard: switch from O(n) to a O(1) algorithm for maintaining peers, fixing stalls and a large memory leak in the process Misc: - devlink: correct VIRTUAL port to not have phys_port attributes - Bluetooth: fix VIRTIO_ID_BT assigned number - net: return the correct errno code ENOBUF -> ENOMEM - wireguard: - peer: allocate in kmem_cache saving 25% on peer memory - do not use -O3" * tag 'net-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) cxgb4: avoid link re-train during TC-MQPRIO configuration sch_htb: fix refcount leak in htb_parent_to_leaf_offload wireguard: allowedips: free empty intermediate nodes when removing single node wireguard: allowedips: allocate nodes in kmem_cache wireguard: allowedips: remove nodes in O(1) wireguard: allowedips: initialize list head in selftest wireguard: peer: allocate in kmem_cache wireguard: use synchronize_net rather than synchronize_rcu wireguard: do not use -O3 wireguard: selftests: make sure rp_filter is disabled on vethc wireguard: selftests: remove old conntrack kconfig value virtchnl: Add missing padding to virtchnl_proto_hdrs ice: Allow all LLDP packets from PF to Tx ice: report supported and advertised autoneg using PHY capabilities ice: handle the VF VSI rebuild failure ice: Fix VFR issues for AVF drivers that expect ATQLEN cleared ice: Fix allowing VF to request more/less queues via virtchnl virtio-net: fix for skb_over_panic inside big mode ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions fib: Return the correct errno code ...
2021-06-04wireguard: selftests: make sure rp_filter is disabled on vethcJason A. Donenfeld
Some distros may enable strict rp_filter by default, which will prevent vethc from receiving the packets with an unrouteable reverse path address. Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04wireguard: selftests: remove old conntrack kconfig valueJason A. Donenfeld
On recent kernels, this config symbol is no longer used. Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04selftests: mptcp_connect: add SO_TIMESTAMPNS cmsg supportFlorian Westphal
This extends the existing setsockopt test case to also check for cmsg timestamps. mptcp_connect will abort/fail if the setockopt was passed but the timestamp cmsg isn't present after successful recvmsg(). Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04perf env: Fix memory leak of bpf_prog_info_linear memberRiccardo Mancini
ASan reported a memory leak caused by info_linear not being deallocated. The info_linear was allocated during in perf_event__synthesize_one_bpf_prog(). This patch adds the corresponding free() when bpf_prog_info_node is freed in perf_env__purge_bpf(). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 7688 byte(s) in 19 object(s) allocated from: #0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f) #1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16 #2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16 #3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9 #4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8 #5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8 #6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8 #7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16 Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lore.kernel.org/lkml/20210602224024.300485-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-04perf symbol-elf: Fix memory leak by freeing sdt_note.argsRiccardo Mancini
Reported by ASan. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Fabian Hemmer <copy@copy.sh> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Jiri Slaby <jirislaby@kernel.org> Link: http://lore.kernel.org/lkml/20210602220833.285226-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-04perf stat: Honor event config name on --no-mergeNamhyung Kim
If user gave an event name explicitly, it should be displayed in the output as is. But with --no-merge option it adds a pmu name at the end so might confuse users. Actually this is true for hybrid pmus, I think we should do the same for others. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210602212241.2175005-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-04perf evsel: Add missing cloning of evsel->use_config_nameNamhyung Kim
The evsel__clone() should copy all fields in the evsel which are set during the event parsing. But it missed the use_config_name field. Fixes: 12279429d862 ("perf stat: Uniquify hybrid event name") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210602212241.2175005-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-03selftests/bpf: Add xdp_redirect_multi into .gitignoreAndrii Nakryiko
When xdp_redirect_multi test binary was added recently, it wasn't added to .gitignore. Fix that. Fixes: d23292476297 ("selftests/bpf: Add xdp_redirect_multi test") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210603004026.2698513-5-andrii@kernel.org
2021-06-03libbpf: Install skel_internal.h header used from light skeletonsAndrii Nakryiko
Light skeleton code assumes skel_internal.h header to be installed system-wide by libbpf package. Make sure it is actually installed. Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210603004026.2698513-4-andrii@kernel.org
2021-06-03libbpf: Refactor header installation portions of MakefileAndrii Nakryiko
As we gradually get more headers that have to be installed, it's quite annoying to copy/paste long $(call) commands. So extract that logic and do a simple $(foreach) over the list of headers. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210603004026.2698513-3-andrii@kernel.org
2021-06-03libbpf: Move few APIs from 0.4 to 0.5 versionAndrii Nakryiko
Official libbpf 0.4 release doesn't include three APIs that were tentatively put into 0.4 section. Fix libbpf.map and move these three APIs: - bpf_map__initial_value; - bpf_map_lookup_and_delete_elem_flags; - bpf_object__gen_loader. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210603004026.2698513-2-andrii@kernel.org
2021-06-02selftest: netdevsim: Add devlink rate grouping testDmytro Linkin
Test verifies that netdevsim correctly implements devlink ops callbacks that set node as a parent of devlink leaf or node rate object. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02selftest: netdevsim: Add devlink rate nodes testDmytro Linkin
Test verifies that it is possible to create, delete and set min/max tx rate of devlink rate node on netdevsim VF. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02selftest: netdevsim: Add devlink port shared/max tx rate testDmytro Linkin
Test verifies that netdevsim VFs can set and retrieve shared/max tx rate through new devlink API. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02selftest: netdevsim: Add devlink rate testDmytro Linkin
Test verifies that all netdevsim VF ports have rate leaf object created by default. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01net/sched: act_vlan: Test priority 0 modificationBoris Sukholitko
Because explicitly being set, the priority 0 should appear in the output. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01net/sched: act_vlan: No dump for unset priorityBoris Sukholitko
Dump vlan priority only if it has been previously set. Fix the tests accordingly. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01perf test: Test 17 fails with make LIBPFM4=1 on s390 z/VMThomas Richter
This test case fails on s390 virtual machine z/VM which has no PMU support when the perf tool is built with LIBPFM4=1. Using make LIBPFM4=1 builds the perf tool with support for libpfm event notation. The command line flag --pfm-events is valid: # ./perf record --pfm-events cycles -- true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (2 samples) ] # However the command 'perf test -Fv 17' fails on s390 z/VM virtual machine with LIBPFM4=1: # perf test -Fv 17 17: Setup struct perf_event_attr : --- start --- ..... running './tests/attr/test-record-group2' unsupp './tests/attr/test-record-group2' running './tests/attr/test-record-pfm-period' expected exclude_hv=0, got 1 FAILED './tests/attr/test-record-pfm-period' - match failure ---- end ---- Setup struct perf_event_attr: FAILED! When --pfm-event system is not supported, the test returns unsupported and continues. Here is an example using a virtual machine on x86 and Fedora 34: [root@f33 perf]# perf test -Fv 17 17: Setup struct perf_event_attr : --- start --- ..... running './tests/attr/test-record-group2' unsupp './tests/attr/test-record-group2' running './tests/attr/test-record-pfm-period' unsupp './tests/attr/test-record-pfm-period' .... The issue is file ./tests/attr/test-record-pfm-period which requires perf event attribute member exclude_hv to be zero. This is not the case on s390 where the value of exclude_hv is one when executing on a z/VM virtual machine without PMU hardware support. Fix this by allowing value exlucde_hv to be zero or one. Output before: # /usr/bin/python ./tests/attr.py -d ./tests/attr/ -t \ test-record-pfm-period -p ./perf -vvv 2>&1| fgrep match matching [event:base-record] match: [event:base-record] matches [] FAILED './tests/attr//test-record-pfm-period' - match failure # Output after: # /usr/bin/python ./tests/attr.py -d ./tests/attr/ -t \ test-record-pfm-period -p ./perf -vvv 2>&1| fgrep match matching [event:base-record] match: [event:base-record] matches ['event-1-0-6', 'event-1-0-5'] matched Background: Using libpfm library ends up in this function call sequence pfm_get_perf_event_encoding() +-- pfm_get_os_event_encoding() +-- pfmlib_perf_event_encode() is called when no hardware specific PMU unit can be detected as in the s390 z/VM virtual machine case. This uses the "perf_events generic PMU" data structure which sets exclude_hv to 1 per default. Using this PMU that test case always fails. That is the reason why exclude_hv attribute setting varies. Version 2: As suggested by Ian Rogers make perf_event_attribute member exclude_hv more robust and accept value 0 or 1 to handle more test cases which might fail on s390 virtual machine z/VM. Suggested-by: Ian Rogers <irogers@google.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20210528091050.245838-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-01perf stat: Fix error return code in bperf__load()Yu Kuai
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Committer notes: Added the missing {} for the now multiline 'if' block, fixing this error: CC /tmp/build/perf/util/bpf_counter.o util/bpf_counter.c: In function ‘bperf__load’: util/bpf_counter.c:523:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation] 523 | if (evsel->bperf_leader_link_fd < 0 && | ^~ util/bpf_counter.c:526:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ 526 | goto out; | ^~~~ cc1: all warnings being treated as errors Fixes: 7fac83aaf2eecc9e ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Link: http://lore.kernel.org/lkml/20210517081254.1561564-1-yukuai3@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-01perf record: Move probing cgroup sampling supportNamhyung Kim
I found that checking cgroup sampling support using the missing features doesn't work on old kernels. Because it added both attr.cgroup bit and PERF_SAMPLE_CGROUP bit, it needs to check whichever comes first (usually the actual event, not dummy). But it only checks the attr.cgroup bit which is set only in the dummy event so cannot detect failtures due the sample bits. Also we don't ignore the missing feature and retry, it'd be better checking it with the API probing logic. Committer notes: Extracted the minimal part to check using the new cgroup API probe routine, the part that removes the cgroup member can be left for further discussion. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210527182835.1634339-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-01perf probe: Fix NULL pointer dereference in convert_variable_location()Li Huafei
If we just check whether the variable can be converted, 'tvar' should be a null pointer. However, the null pointer check is missing in the 'Constant value' execution path. The following cases can trigger this problem: $ cat test.c #include <stdio.h> void main(void) { int a; const int b = 1; asm volatile("mov %1, %0" : "=r"(a): "i"(b)); printf("a: %d\n", a); } $ gcc test.c -o test -O -g $ sudo ./perf probe -x ./test -L "main" <main@/home/lhf/test.c:0> 0 void main(void) { 2 int a; const int b = 1; asm volatile("mov %1, %0" : "=r"(a): "i"(b)); 6 printf("a: %d\n", a); } $ sudo ./perf probe -x ./test -V "main:6" Segmentation fault The check on 'tvar' is added. If 'tavr' is a null pointer, we return 0 to indicate that the variable can be converted. Now, we can successfully show the variables that can be accessed. $ sudo ./perf probe -x ./test -V "main:6" Available variables at main:6 @<main+13> char* __fmt int a int b However, the variable 'b' cannot be tracked. $ sudo ./perf probe -x ./test -D "main:6 b" Failed to find the location of the 'b' variable at this address. Perhaps it has been optimized out. Use -V with the --range option to show 'b' location range. Error: Failed to add events. This is because __die_find_variable_cb() did not successfully match variable 'b', which has the DW_AT_const_value attribute instead of DW_AT_location. We added support for DW_AT_const_value in __die_find_variable_cb(). With this modification, we can successfully track the variable 'b'. $ sudo ./perf probe -x ./test -D "main:6 b" p:probe_test/main_L6 /home/lhf/test:0x1156 b=\1:s32 Fixes: 66f69b219716 ("perf probe: Support DW_AT_const_value constant value") Signed-off-by: Li Huafei <lihuafei1@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Jianlin Lv <jianlin.lv@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Zhang Jinhao <zhangjinhao2@huawei.com> http://lore.kernel.org/lkml/20210601092750.169601-1-lihuafei1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-01perf tools: Copy uapi/asm/perf_regs.h from the kernel for MIPSTiezhu Yang
To allow the build to complete on older systems, where those files are either not uptodate, lacking some recent additions or not present at all. And check if the copy drifts from the kernel. This commit is similar with commit 12f020338a2c ("tools: Copy uapi/asm/perf_regs.h from the kernel") With this commit, we can avoid the following build error in any case: tools/perf/arch/mips/include/perf_regs.h:7:10: fatal error: asm/perf_regs.h: No such file or directory #include <asm/perf_regs.h> ^~~~~~~~~~~~~~~~~ compilation terminated. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xuefeng Li <lixuefeng@loongson.cn> Link: http://lore.kernel.org/lkml/1622548436-12472-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "ARM fixes: - Another state update on exit to userspace fix - Prevent the creation of mixed 32/64 VMs - Fix regression with irqbypass not restarting the guest on failed connect - Fix regression with debug register decoding resulting in overlapping access - Commit exception state on exit to usrspace - Fix the MMU notifier return values - Add missing 'static' qualifiers in the new host stage-2 code x86 fixes: - fix guest missed wakeup with assigned devices - fix WARN reported by syzkaller - do not use BIT() in UAPI headers - make the kvm_amd.avic parameter bool PPC fixes: - make halt polling heuristics consistent with other architectures selftests: - various fixes - new performance selftest memslot_perf_test - test UFFD minor faults in demand_paging_test" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits) selftests: kvm: fix overlapping addresses in memslot_perf_test KVM: X86: Kill off ctxt->ud KVM: X86: Fix warning caused by stale emulation context KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception KVM: x86/mmu: Fix comment mentioning skip_4k KVM: VMX: update vcpu posted-interrupt descriptor when assigning device KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK KVM: x86: add start_assignment hook to kvm_x86_ops KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch selftests: kvm: do only 1 memslot_perf_test run by default KVM: X86: Use _BITUL() macro in UAPI headers KVM: selftests: add shared hugetlbfs backing source type KVM: selftests: allow using UFFD minor faults for demand paging KVM: selftests: create alias mappings when using shared memory KVM: selftests: add shmem backing source type KVM: selftests: refactor vm_mem_backing_src_type flags KVM: selftests: allow different backing source types KVM: selftests: compute correct demand paging size KVM: selftests: simplify setup_demand_paging error handling KVM: selftests: Print a message if /dev/kvm is missing ...
2021-05-29selftests: kvm: fix overlapping addresses in memslot_perf_testPaolo Bonzini
vm_create allocates memory and maps it close to GPA. This memory is separate from what is allocated in subsequent calls to vm_userspace_mem_region_add, so it is incorrect to pass the test memory size to vm_create_default. Just pass a small fixed amount of memory which can be used later for page table, otherwise GPAs are already allocated at MEM_GPA and the test aborts. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-28Merge tag 'perf-tools-fixes-for-v5.13-2021-05-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix error checking of BPF prog attachment in 'perf stat'. - Fix getting maximum number of fds in the vendor events JSON parser. - Move debug initialization earlier, fixing a segfault in some cases. - Fix eventcode of power10 JSON events. * tag 'perf-tools-fixes-for-v5.13-2021-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf vendor events powerpc: Fix eventcode of power10 JSON events perf stat: Fix error check for bpf_program__attach perf debug: Move debug initialization earlier perf jevents: Fix getting maximum number of fds
2021-05-28mptcp: update selftest for fallback due to OoOPaolo Abeni
The previous commit noted that we can have fallback scenario due to OoO (or packet drop). Update the self-tests accordingly Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-28bpf, docs: Add llvm_reloc.rst to explain llvm bpf relocationsYonghong Song
LLVM upstream commit https://reviews.llvm.org/D102712 made some changes to bpf relocations to make them llvm linker lld friendly. The scope of existing relocations R_BPF_64_{64,32} is narrowed and new relocations R_BPF_64_{ABS32,ABS64,NODYLD32} are introduced. Let us add some documentation about llvm bpf relocations so people can understand how to resolve them properly in their respective tools. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210526152457.335210-1-yhs@fb.com
2021-05-28perf vendor events powerpc: Fix eventcode of power10 JSON eventsKajol Jain
Fixed the eventcode values in the power10 JSON event files to prepend "0x" since these are hexadecimal values. The patch also changes the event description of the PM_EXEC_STALL_LOAD_FINISH and PM_EXEC_STALL_NTC_FLUSH event and move some events to correct files. Fixes: 32daa5d7899e ("perf vendor events: Initial JSON/events list for power10 platform") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lore.kernel.org/lkml/20210525063723.1191514-1-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-27perf stat: Fix error check for bpf_program__attachNamhyung Kim
It seems the bpf_program__attach() returns a negative error code instead of a NULL pointer in case of error. Fixes: 7fac83aaf2ee ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20210527220052.1657578-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-27selftests: devlink_lib: add check for devlink device existenceJiri Pirko
If user passes devlink handle over DEVLINK_DEV variable, check if the device exists. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20210527105515.790330-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27perf debug: Move debug initialization earlierIan Rogers
This avoids segfaults during option handlers that use pr_err. For example, "perf --debug nopager list" segfaults before this change. Fixes: 8abceacff87d (perf debug: Add debug_set_file function) Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210519164447.2672030-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-27selftests: kvm: do only 1 memslot_perf_test run by defaultPaolo Bonzini
The test takes a long time with the current implementation of memslots, so cut the run time a bit. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27KVM: X86: Use _BITUL() macro in UAPI headersJoe Richey
Replace BIT() in KVM's UPAI header with _BITUL(). BIT() is not defined in the UAPI headers and its usage may cause userspace build errors. Fixes: fb04a1eddb1a ("KVM: X86: Implement ring-based dirty memory tracking") Signed-off-by: Joe Richey <joerichey@google.com> Message-Id: <20210521085849.37676-3-joerichey94@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27KVM: selftests: add shared hugetlbfs backing source typeAxel Rasmussen
This lets us run the demand paging test on top of a shared hugetlbfs-backed area. The "shared" is key, as this allows us to exercise userfaultfd minor faults on hugetlbfs. Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Message-Id: <20210519200339.829146-11-axelrasmussen@google.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 01:39:59 +0000