summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-06-07objtool: Get rid of reloc->offsetJosh Poimboeuf
Get the offset from the embedded GElf_Rel[a] struct. With allyesconfig + CONFIG_DEBUG_INFO: - Before: peak heap memory consumption: 43.83G - After: peak heap memory consumption: 42.10G Link: https://lore.kernel.org/r/2b9ec01178baa346a99522710bf2e82159412e3a.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Get rid of reloc->idxJosh Poimboeuf
Use the array offset to calculate the reloc index. With allyesconfig + CONFIG_DEBUG_INFO: - Before: peak heap memory consumption: 45.56G - After: peak heap memory consumption: 43.83G Link: https://lore.kernel.org/r/7351d2ebad0519027db14a32f6204af84952574a.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Get rid of reloc->listJosh Poimboeuf
Now that all relocs are allocated in an array, the linked list is no longer needed. With allyesconfig + CONFIG_DEBUG_INFO: - Before: peak heap memory consumption: 49.02G - After: peak heap memory consumption: 45.56G Link: https://lore.kernel.org/r/71e7a2c017dbc46bb497857ec97d67214f832d10.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Allocate relocs in advance for new rela sectionsJosh Poimboeuf
Similar to read_relocs(), allocate the reloc structs all together in an array rather than allocating them one at a time. Link: https://lore.kernel.org/r/5332d845c5a2d6c2d052075b381bfba8bcb67ed5.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Add for_each_reloc()Josh Poimboeuf
Link: https://lore.kernel.org/r/dbfcb1037d8b958e52d097b67829c4c6811c24bb.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Don't free memory in elf_close()Josh Poimboeuf
It's not necessary, objtool's about to exit anyway. Link: https://lore.kernel.org/r/74bdb3058b8f029db8d5b3b5175f2a200804196d.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Keep GElf_Rel[a] structs syncedJosh Poimboeuf
Keep the GElf_Rela structs synced with their 'struct reloc' counterparts instead of having to go back and "rebuild" them later. Link: https://lore.kernel.org/r/156d8a3e528a11e5c8577cf552890ed1f2b9567b.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Add elf_create_section_pair()Josh Poimboeuf
When creating an annotation section, allocate the reloc section data at the beginning. This simplifies the data model a bit and also saves memory due to the removal of malloc() in elf_rebuild_reloc_section(). With allyesconfig + CONFIG_DEBUG_INFO: - Before: peak heap memory consumption: 53.49G - After: peak heap memory consumption: 49.02G Link: https://lore.kernel.org/r/048e908f3ede9b66c15e44672b6dda992b1dae3e.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Add mark_sec_changed()Josh Poimboeuf
Ensure elf->changed always gets set when sec->changed gets set. Link: https://lore.kernel.org/r/9a810a8d2e28af6ba07325362d0eb4703bb09d3a.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Fix reloc_hash sizeJosh Poimboeuf
With CONFIG_DEBUG_INFO, DWARF creates a lot of relocations and reloc_hash is woefully undersized, which can affect performance significantly. Fix that. Link: https://lore.kernel.org/r/38ef60dc8043270bf3b9dfd139ae2a30ca3f75cc.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Consolidate rel/rela handlingJosh Poimboeuf
The GElf_Rel[a] structs have more similarities than differences. It's safe to hard-code the assumptions about their shared fields as they will never change. Consolidate their handling where possible, getting rid of duplicated code. Also, at least for now we only ever create rela sections, so simplify the relocation creation code to be rela-only. Link: https://lore.kernel.org/r/dcabf6df400ca500ea929f1e4284f5e5ec0b27c8.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Improve reloc namingJosh Poimboeuf
- The term "reloc" is overloaded to mean both "an instance of struct reloc" and "a reloc section". Change the latter to "rsec". - For variable names, use "sec" for regular sections and "rsec" for rela sections to prevent them getting mixed up. - For struct reloc variables, use "reloc" instead of "rel" everywhere for consistency. Link: https://lore.kernel.org/r/8b790e403df46f445c21003e7893b8f53b99a6f3.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Remove flags argument from elf_create_section()Josh Poimboeuf
Simplify the elf_create_section() interface a bit by removing the flags argument. Most callers don't care about changing the section header flags. If needed, they can be modified afterwards, just like any other section header field. Link: https://lore.kernel.org/r/515235d9cf62637a14bee37bfa9169ef20065471.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Tidy elf.hJosh Poimboeuf
Reorganize elf.h a bit: - Move the prototypes higher up so they can be used by the inline functions. - Move hash-related code to the bottom. - Remove the unused ELF_HASH_BITS macro. No functional changes. Link: https://lore.kernel.org/r/b1490ed85951868219a6ece177a7cd30a6454d66.1685464332.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07objtool: Allow stack operations in UNWIND_HINT_UNDEFINED regionsJosh Poimboeuf
If the code specified UNWIND_HINT_UNDEFINED, skip the "undefined stack state" warning due to a stack operation. Just ignore the stack op and continue to propagate the undefined state. Link: https://lore.kernel.org/r/820c5b433f17c84e8761fb7465a8d319d706b1cf.1685981486.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-07tools: Remove unnecessary variablesLu Hongfei
There are several places where warnings variables are not needed, remove them and directly return 0. Signed-off-by: Lu Hongfei <luhongfei@vivo.com> Link: https://lore.kernel.org/r/20230530075649.21661-1-luhongfei@vivo.com Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-06-02objtool: Add __kunit_abort() to noreturnsJosh Poimboeuf
Fixes a bunch of warnings like: drivers/input/tests/input_test.o: warning: objtool: input_test_init+0x1cb: stack state mismatch: cfa1=4+64 cfa2=4+56 lib/kunit/kunit-test.o: warning: objtool: kunit_log_newline_test+0xfb: return with modified stack frame ... Fixes: 260755184cbd ("kunit: Move kunit_abort() call out of kunit_do_failed_assertion()") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20230602175453.swsn3ehyochtwkhy@treble
2023-05-16objtool: Move noreturn function list to separate fileJosh Poimboeuf
This makes it a little cleaner and easier to maintain. Suggested-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/r/cecacf07a69a244c74474c18b7652627de67a528.1681853186.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-05-16tools/lib/subcmd: Replace NORETURN usage with __noreturnJosh Poimboeuf
NORETURN is redundant with __noreturn, just use the latter. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/r/c7c83d1e6b3d2b0c3e65dd3790c22c772d3b2527.1681853186.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-05-16objtool: Remove superfluous global_noreturns entriesJosh Poimboeuf
lbug_with_loc() no longer exists, and resume_play_dead() is static (objtool only checks globals and weaks). Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/r/2725d7f2ccc2361c6903de9ebaa2b5bb304f7ac2.1681853186.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-05-16objtool: Ignore exc_double_fault() __noreturn warningsJosh Poimboeuf
This is a hack, but it works for now. Problem is, exc_double_fault() may or may not return, depending on whether CONFIG_X86_ESPFIX64 is set. But objtool has no visibility to the kernel config. "Fix" it by silencing the exc_double_fault() __noreturn warning. This removes the following warning: vmlinux.o: warning: objtool: xenpv_exc_double_fault+0xd: exc_double_fault() is missing a __noreturn annotation Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/r/a45b085071d3a7d049a20f9e78754452336ecbe8.1681853186.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-05-16objtool: Detect missing __noreturn annotationsJosh Poimboeuf
Most "unreachable instruction" warnings these days seem to actually be the result of a missing __noreturn annotation. Add an explicit check for that. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/r/6e2b93d8c65eaed6c4166a358269dc0ef01f890c.1681853186.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-05-16objtool: Include backtrace in verbose modeJosh Poimboeuf
Include backtrace in verbose mode. This makes it easy to gather all the information needed for diagnosing objtool warnings. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/r/c255224fabcf7e64bac232fec1c77c9fc2d7d7ab.1681853186.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-05-16objtool: Add verbose option for disassembling affected functionsJosh Poimboeuf
When a warning is associated with a function, add an option to disassemble that function. This makes it easier for reporters to submit the information needed to diagnose objtool warnings. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/r/dd0fe13428ede186f09c74059a8001f4adcea5fc.1681853186.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-05-16objtool: Limit unreachable warnings to once per functionJosh Poimboeuf
Unreachable instruction warnings are limited to once per object file. That no longer makes sense for vmlinux validation, which might have more unreachable instructions lurking in other places. Change it to once per function. Note this affects some other (much rarer) non-fatal warnings as well. In general I think one-warning-per-function makes sense, as related warnings can accumulate quickly and we want to eventually get back to failing the build with -Werror anyway. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/r/9d38f881bfc34e031c74e4e90064ccb3e49f599a.1681853186.git.jpoimboe@kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-05-14Merge tag 'cxl-fixes-6.4-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull compute express link fixes from Dan Williams: - Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests - Fix leaking kernel memory to a root-only sysfs attribute * tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl: Add missing return to cdat read error path tools/testing/cxl: Use DEFINE_STATIC_SRCU()
2023-05-13tools/testing/cxl: Use DEFINE_STATIC_SRCU()Dan Williams
Starting with commit: 95433f726301 ("srcu: Begin offloading srcu_struct fields to srcu_update") ...it is no longer possible to do: static DEFINE_SRCU(x) Switch to DEFINE_STATIC_SRCU(x) to fix: tools/testing/cxl/test/mock.c:22:1: error: duplicate ‘static’ 22 | static DEFINE_SRCU(cxl_mock_srcu); | ^~~~~~ Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168392709546.1135523.10424917245934547117.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-05-11Merge tag 'net-6.4-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - mtk_eth_soc: fix NULL pointer dereference Previous releases - regressions: - core: - skb_partial_csum_set() fix against transport header magic value - fix load-tearing on sk->sk_stamp in sock_recv_cmsgs(). - annotate sk->sk_err write from do_recvmmsg() - add vlan_get_protocol_and_depth() helper - netlink: annotate accesses to nlk->cb_running - netfilter: always release netdev hooks from notifier Previous releases - always broken: - core: deal with most data-races in sk_wait_event() - netfilter: fix possible bug_on with enable_hooks=1 - eth: bonding: fix send_peer_notif overflow - eth: xpcs: fix incorrect number of interfaces - eth: ipvlan: fix out-of-bounds caused by unclear skb->cb - eth: stmmac: Initialize MAC_ONEUS_TIC_COUNTER register" * tag 'net-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits) af_unix: Fix data races around sk->sk_shutdown. af_unix: Fix a data race of sk->sk_receive_queue->qlen. net: datagram: fix data-races in datagram_poll() net: mscc: ocelot: fix stat counter register values ipvlan:Fix out-of-bounds caused by unclear skb->cb docs: networking: fix x25-iface.rst heading & index order gve: Remove the code of clearing PBA bit tcp: add annotations around sk->sk_shutdown accesses net: add vlan_get_protocol_and_depth() helper net: pcs: xpcs: fix incorrect number of interfaces net: deal with most data-races in sk_wait_event() net: annotate sk->sk_err write from do_recvmmsg() netlink: annotate accesses to nlk->cb_running kselftest: bonding: add num_grat_arp test selftests: forwarding: lib: add netns support for tc rule handle stats get Documentation: bonding: fix the doc of peer_notif_delay bonding: fix send_peer_notif overflow net: ethernet: mtk_eth_soc: fix NULL pointer dereference selftests: nft_flowtable.sh: check ingress/egress chain too selftests: nft_flowtable.sh: monitor result file sizes ...
2023-05-10Merge tag 'nf-23-05-10' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter updates for net The following patchset contains Netfilter fixes for net: 1) Fix UAF when releasing netnamespace, from Florian Westphal. 2) Fix possible BUG_ON when nf_conntrack is enabled with enable_hooks, from Florian Westphal. 3) Fixes for nft_flowtable.sh selftest, from Boris Sukholitko. 4) Extend nft_flowtable.sh selftest to cover integration with ingress/egress hooks, from Florian Westphal. * tag 'nf-23-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: nft_flowtable.sh: check ingress/egress chain too selftests: nft_flowtable.sh: monitor result file sizes selftests: nft_flowtable.sh: wait for specific nc pids selftests: nft_flowtable.sh: no need for ps -x option selftests: nft_flowtable.sh: use /proc for pid checking netfilter: conntrack: fix possible bug_on with enable_hooks=1 netfilter: nf_tables: always release netdev hooks from notifier ==================== Link: https://lore.kernel.org/r/20230510083313.152961-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-10kselftest: bonding: add num_grat_arp testHangbin Liu
TEST: num_grat_arp (active-backup miimon num_grat_arp 10) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 20) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 30) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 50) [ OK ] Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10selftests: forwarding: lib: add netns support for tc rule handle stats getHangbin Liu
When run the test in netns, it's not easy to get the tc stats via tc_rule_handle_stats_get(). With the new netns parameter, we can get stats from specific netns like num=$(tc_rule_handle_stats_get "dev eth0 ingress" 101 ".packets" "-n ns") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10selftests: nft_flowtable.sh: check ingress/egress chain tooFlorian Westphal
Make sure flowtable interacts correctly with ingress and egress chains, i.e. those get handled before and after flow table respectively. Adds three more tests: 1. repeat flowtable test, but with 'ip dscp set cs3' done in inet forward chain. Expect that some packets have been mangled (before flowtable offload became effective) while some pass without mangling (after offload succeeds). 2. repeat flowtable test, but with 'ip dscp set cs3' done in veth0:ingress. Expect that all packets pass with cs3 dscp field. 3. same as 2, but use veth1:egress. Expect the same outcome. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: monitor result file sizesBoris Sukholitko
When running nft_flowtable.sh in VM on a busy server we've found that the time of the netcat file transfers vary wildly. Therefore replace hardcoded 3 second sleep with the loop checking for a change in the file sizes. Once no change in detected we test the results. Nice side effect is that we shave 1 second sleep in the fast case (hard-coded 3 second sleep vs two 1 second sleeps). Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: wait for specific nc pidsBoris Sukholitko
Doing wait with no parameters may interfere with some of the tests having their own background processes. Although no such test is currently present, the cleanup is useful to rely on the nft_flowtable.sh for local development (e.g. running background tcpdump command during the tests). Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: no need for ps -x optionBoris Sukholitko
Some ps commands (e.g. busybox derived) have no -x option. For the purposes of hash calculation of the list of processes this option is inessential. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: use /proc for pid checkingBoris Sukholitko
Some ps commands (e.g. busybox derived) have no -p option. Use /proc for pid existence check. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-07Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Third version of perf tool updates, with the build problems with with using a 'vmlinux.h' generated from the main build fixed, and the bpf skeleton build disabled by default. Build: - Require libtraceevent to build, one can disable it using NO_LIBTRACEEVENT=1. It is required for tools like 'perf sched', 'perf kvm', 'perf trace', etc. libtraceevent is available in most distros so installing 'libtraceevent-devel' should be a one-time event to continue building perf as usual. Using NO_LIBTRACEEVENT=1 produces tooling that is functional and sufficient for lots of users not interested in those libtraceevent dependent features. - Allow Python support in 'perf script' when libtraceevent isn't linked, as not all features requires it, for instance Intel PT does not use tracepoints. - Error if the python interpreter needed for jevents to work isn't available and NO_JEVENTS=1 isn't set, preventing a build without support for JSON vendor events, which is a rare but possible condition. The two check error messages: $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) - Make libbpf 1.0 the minimum required when building with out of tree, distro provided libbpf. - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++ demangler, add 'perf test' entry for it. - Make binutils libraries opt in, as distros disable building with it due to licensing, they were used for C++ demangling, for instance. - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or equivalent) isn't installed, we'll just have a build warning: Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev - Add a feature test for scandirat(), that is not implemented so far in musl and uclibc, disabling features that need it, such as scanning for tracepoints in /sys/kernel/tracing/events. perf BPF filters: - New feature where BPF can be used to filter samples, for instance: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) - In addition to 'period' (PERF_SAMPLE_PERIOD), the other PERF_SAMPLE_ can be used for filtering, and also some other sample accessible values, from tools/perf/Documentation/perf-record.txt: Essentially the BPF filter expression is: <term> <operator> <value> (("," | "||") <term> <operator> <value>)* The <term> can be one of: ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr, code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat, p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock, mem_dtlb, mem_blk, mem_hops The <operator> can be one of: ==, !=, >, >=, <, <=, & The <value> can be one of: <number> (for any term) na, load, store, pfetch, exec (for mem_op) l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl) na, none, hit, miss, hitm, fwd, peer (for mem_snoop) remote (for mem_remote) na, locked (for mem_locked) na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb) na, by_data, by_addr (for mem_blk) hops0, hops1, hops2, hops3 (for mem_hops) perf lock contention: - Show lock type with address. - Track and show mmap_lock, siglock and per-cpu rq_lock with address. This is done for mmap_lock by following the current->mm pointer: $ sudo ./perf lock con -abl -- sleep 10 contended total wait max wait avg wait address symbol ... 16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640 17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0 3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock 3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58 1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70 9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock 14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0 3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock 16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560 11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock 1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8 1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock 581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058 5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070 112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120 381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock 255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80 - Update default map size to 16384. - Allocate single letter option -M for --map-nr-entries, as it is proving being frequently used. - Fix struct rq lock access for older kernels with BPF's CO-RE (Compile once, run everywhere). - Fix problems found with MSAn. perf report/top: - Add inline information when using --call-graph=fp or lbr, as was already done to the --call-graph=dwarf callchain mode. - Improve the 'srcfile' sort key performance by really using an optimization introduced in 6.2 for the 'srcline' sort key that avoids calling addr2line for comparision with each sample. perf sched: - Make 'perf sched latency/map/replay' to use "sched:sched_waking" instead of "sched:sched_waking", consistent with 'perf record' since d566a9c2d482 ("perf sched: Prefer sched_waking event when it exists"). perf ftrace: - Make system wide the default target for latency subcommand, run the following command then generate some network traffic and press control+C: # perf ftrace latency -T __kfree_skb ^C DURATION | COUNT | GRAPH | 0 - 1 us | 27 | ############# | 1 - 2 us | 22 | ########### | 2 - 4 us | 8 | #### | 4 - 8 us | 5 | ## | 8 - 16 us | 24 | ############ | 16 - 32 us | 2 | # | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # perf top: - Add --branch-history (LBR: Last Branch Record) option, just like already available for 'perf record'. - Fix segfault in thread__comm_len() where thread->comm was being used outside thread->comm_lock. perf annotate: - Allow configuring objdump and addr2line in ~/.perfconfig., so that you can use alternative binaries, such as llvm's. perf kvm: - Add TUI mode for 'perf kvm stat report'. Reference counting: - Add reference count checking infrastructure to check for use after free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs, more to come. To build with it use -DREFCNT_CHECKING=1 in the make command line to build tools/perf. Documented at: https://perf.wiki.kernel.org/index.php/Reference_Count_Checking - The above caught, for instance, fix, present in this series: - Fix maps use after put in 'perf test "Share thread maps"': 'maps' is copied from leader, but the leader is put on line 79 and then 'maps' is used to read the reference count below - so a use after put, with the put of maps happening within thread__put. Fixed by reversing the order of puts so that the leader is put last. - Also several fixes were made to places where reference counts were not being held. - Make this one of the tests in 'make -C tools/perf build-test' to regularly build test it and to make sure no direct access to the reference counted structs are made, doing that via accessors to check the validity of the struct pointer. ARM64: - Fix 'perf report' segfault when filtering coresight traces by sparse lists of CPUs. - Add support for 'simd' as a sort field for 'perf report', to show ARM's NEON SIMD's predicate flags: "partial" and "empty". arm64 vendor events: - Add N1 metrics. Intel vendor events: - Add graniterapids, grandridge and sierraforrest events. - Refresh events for: alderlake, aldernaken, broadwell, broadwellde, broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex, jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids, silvermont, skylake, tigerlake and westmereep-dp - Refresh metrics for alderlake-n, broadwell, broadwellde, broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and skylakex. perf stat: - Implement --topdown using JSON metrics. - Add TopdownL1 JSON metric as a default if present, but disable it for now for some Intel hybrid architectures, a series of patches addressing this is being reviewed and will be submitted for v6.5. - Use metrics for --smi-cost. - Update topdown documentation. Vendor events (JSON) infrastructure: - Add support for computing and printing metric threshold values. For instance, here is one found in thesapphirerapids json file: { "BriefDescription": "Percentage of cycles spent in System Management Interrupts.", "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)", "MetricGroup": "smi", "MetricName": "smi_cycles", "MetricThreshold": "smi_cycles > 0.1", "ScaleUnit": "100%" }, - Test parsing metric thresholds with the fake PMU in 'perf test pmu-events'. - Support for printing metric thresholds in 'perf list'. - Add --metric-no-threshold option to 'perf stat'. - Add rand (reverse and) and has_pmem (optane memory) support to metrics. - Sort list of input files to avoid depending on the order from readdir() helping in obtaining reproducible builds. S/390: - Add common metrics: - CPI (cycles per instruction), prbstate (ratio of instructions executed in problem state compared to total number of instructions), l1mp (Level one instruction and data cache misses per 100 instructions). - Add cache metrics for z13, z14, z15 and z16. - Add metric for TLB and cache. ARM: - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE (Memory Tagging Extension) and MOPS (Memory Operations) load/store. Intel PT hardware tracing: - Add event type names UINTR (User interrupt delivered) and UIRET (Exiting from user interrupt routine), documented in table 32-50 "CFE Packet Type and Vector Fields Details" in the Intel Processor Trace chapter of The Intel SDM Volume 3 version 078. - Add support for new branch instructions ERETS and ERETU. - Fix CYC timestamps after standalone CBR ARM CoreSight hardware tracing: - Allow user to override timestamp and contextid settings. - Fix segfault in dso lookup. - Fix timeless decode mode detection. - Add separate decode paths for timeless and per-thread modes. auxtrace: - Fix address filter entire kernel size. Miscellaneous: - Fix use-after-free and unaligned bugs in the PLT handling routines. - Use zfree() to reduce chances of use after free. - Add missing 0x prefix for addresses printed in hexadecimal in 'perf probe'. - Suppress massive unsupported target platform errors in the unwind code. - Fix return incorrect build_id size in elf_read_build_id(). - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 . - Add missing new parameter in kfree_skb tracepoint to the python scripts using it. - Add 'perf bench syscall fork' benchmark. - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in 'perf mem'. - Fix wrong size expectation for perf test 'Setup struct perf_event_attr' caused by the patch adding perf_event_attr::config3. - Fix some spelling mistakes" * tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits) Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" Revert "perf build: Warn for BPF skeletons if endian mismatches" perf metrics: Fix SEGV with --for-each-cgroup perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE perf stat: Separate bperf from bpf_profiler perf test record+probe_libc_inet_pton: Fix call chain match on x86_64 perf test record+probe_libc_inet_pton: Fix call chain match on s390 perf tracepoint: Fix memory leak in is_valid_tracepoint() perf cs-etm: Add fix for coresight trace for any range of CPUs perf build: Fix unescaped # in perf build-test perf unwind: Suppress massive unsupported target platform errors perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it perf script: Print raw ip instead of binary offset for callchain perf symbols: Fix return incorrect build_id size in elf_read_build_id() perf list: Modify the warning message about scandirat(3) perf list: Fix memory leaks in print_tracepoint_events() perf lock contention: Rework offset calculation with BPF CO-RE perf lock contention: Fix struct rq lock access perf stat: Disable TopdownL1 on hybrid perf stat: Avoid SEGV on counter->name ...
2023-05-06Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL"Arnaldo Carvalho de Melo
This reverts commit a980755beb5aca9002e1c95ba519b83a44242b5b. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-06Revert "perf build: Warn for BPF skeletons if endian mismatches"Arnaldo Carvalho de Melo
This reverts commit 51924ae69eea5bc90b5da525fbcf4bbd5f8551b3. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-05Merge tag 'net-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ...
2023-05-05perf metrics: Fix SEGV with --for-each-cgroupIan Rogers
Ensure the metric threshold is copied correctly or else a use of uninitialized memory happens. Fixes: d0a3052f6faefffc ("perf metric: Compute and print threshold values") Reported-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230505204119.3443491-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-05perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used ↵Arnaldo Carvalho de Melo
structs + CO-RE Linus reported a build break due to using a vmlinux without a BTF elf section to generate the vmlinux.h header with bpftool for use in the BPF tools in tools/perf/util/bpf_skel/*.bpf.c. Instead add a vmlinux.h file with the structs needed with the fields the tools need, marking the structs with __attribute__((preserve_access_index)), so that libbpf's CO-RE code can fixup the struct field offsets. In some cases the vmlinux.h file that was being generated by bpftool from the kernel BTF information was not needed at all, just including linux/bpf.h, sometimes linux/perf_event.h was enough as non-UAPI types were not being used. To keep te patch small, include those UAPI headers from the trimmed down vmlinux.h file, that then provides the tools with just the structs and the subset of its fields needed for them. Testing it: # perf lock contention -b find / > /dev/null ^C contended total wait max wait avg wait type caller 7 53.59 us 10.86 us 7.66 us rwlock:R start_this_handle+0xa0 2 30.35 us 21.99 us 15.17 us rwsem:R iterate_dir+0x52 1 9.04 us 9.04 us 9.04 us rwlock:W start_this_handle+0x291 1 8.73 us 8.73 us 8.73 us spinlock raw_spin_rq_lock_nested+0x1e # # perf lock contention -abl find / > /dev/null ^C contended total wait max wait avg wait address symbol 1 262.96 ms 262.96 ms 262.96 ms ffff8e67502d0170 (mutex) 12 244.24 us 39.91 us 20.35 us ffff8e6af56f8070 mmap_lock (rwsem) 7 30.28 us 6.85 us 4.33 us ffff8e6c865f1d40 rq_lock (spinlock) 3 7.42 us 4.03 us 2.47 us ffff8e6c864b1d40 rq_lock (spinlock) 2 3.72 us 2.19 us 1.86 us ffff8e6c86571d40 rq_lock (spinlock) 1 2.42 us 2.42 us 2.42 us ffff8e6c86471d40 rq_lock (spinlock) 4 2.11 us 559 ns 527 ns ffffffff9a146c80 rcu_state (spinlock) 3 1.45 us 818 ns 482 ns ffff8e674ae8384c (rwlock) 1 870 ns 870 ns 870 ns ffff8e68456ee060 (rwlock) 1 663 ns 663 ns 663 ns ffff8e6c864f1d40 rq_lock (spinlock) 1 573 ns 573 ns 573 ns ffff8e6c86531d40 rq_lock (spinlock) 1 472 ns 472 ns 472 ns ffff8e6c86431740 (spinlock) 1 397 ns 397 ns 397 ns ffff8e67413a4f04 (spinlock) # # perf test offcpu 95: perf record offcpu profiling tests : Ok # # perf kwork latency --use-bpf Starting trace, Hit <Ctrl+C> to stop and report ^C Kwork Name | Cpu | Avg delay | Count | Max delay | Max delay start | Max delay end | -------------------------------------------------------------------------------------------------------------------------------- (w)flush_memcg_stats_dwork | 0000 | 1056.212 ms | 2 | 2112.345 ms | 550113.229573 s | 550115.341919 s | (w)toggle_allocation_gate | 0000 | 10.144 ms | 62 | 416.389 ms | 550113.453518 s | 550113.869907 s | (w)0xffff8e6748e28080 | 0002 | 0.623 ms | 1 | 0.623 ms | 550110.989841 s | 550110.990464 s | (w)vmstat_shepherd | 0000 | 0.586 ms | 10 | 2.828 ms | 550111.971536 s | 550111.974364 s | (w)vmstat_update | 0007 | 0.363 ms | 5 | 1.634 ms | 550113.222520 s | 550113.224154 s | (w)vmstat_update | 0000 | 0.324 ms | 10 | 2.827 ms | 550111.971526 s | 550111.974354 s | (w)0xffff8e674c5f4a58 | 0002 | 0.102 ms | 5 | 0.134 ms | 550110.989839 s | 550110.989972 s | (w)psi_avgs_work | 0001 | 0.086 ms | 3 | 0.107 ms | 550114.957852 s | 550114.957959 s | (w)psi_avgs_work | 0000 | 0.079 ms | 5 | 0.100 ms | 550118.605668 s | 550118.605768 s | (w)kfree_rcu_monitor | 0006 | 0.079 ms | 1 | 0.079 ms | 550110.925821 s | 550110.925900 s | (w)psi_avgs_work | 0004 | 0.079 ms | 1 | 0.079 ms | 550109.581835 s | 550109.581914 s | (w)psi_avgs_work | 0001 | 0.078 ms | 1 | 0.078 ms | 550109.197809 s | 550109.197887 s | (w)psi_avgs_work | 0002 | 0.077 ms | 5 | 0.086 ms | 550110.669819 s | 550110.669905 s | <SNIP> # strace -e bpf -o perf-stat-bpf-counters.output perf stat -e cycles --bpf-counters sleep 1 Performance counter stats for 'sleep 1': 6,197,983 cycles 1.003922848 seconds time elapsed 0.000000000 seconds user 0.002032000 seconds sys # head -7 perf-stat-bpf-counters.output bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/perf_attr_map", bpf_fd=0, file_flags=0}, 16) = 3 bpf(BPF_OBJ_GET_INFO_BY_FD, {info={bpf_fd=3, info_len=88, info=0x7ffcead64990}}, 16) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=3, key=0x24129e0, value=0x7ffcead65a48, flags=BPF_ANY}, 32) = 0 bpf(BPF_LINK_GET_FD_BY_ID, {link_id=1252}, 12) = -1 ENOENT (No such file or directory) bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65780, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 116) = 4 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65920, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0, fd_array=NULL}, 128) = 4 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\20\0\0\0\20\0\0\0\5\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=45, btf_log_size=0, btf_log_level=0}, 28) = 4 # Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Song Liu <song@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Co-developed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/lkml/ZFU1PJrn8YtHIqno@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-05perf stat: Separate bperf from bpf_profilerDmitrii Dolgov
It seems that perf stat -b <prog id> doesn't produce any results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized cycles: 0 0 0 time counts unit events 10.007641640 <not supported> cycles Looks like this happens because fentry/fexit progs are getting loaded, but the corresponding perf event is not enabled and not added into the events bpf map. I think there is some mixing up between two type of bpf support, one for bperf and one for bpf_profiler. Both are identified via evsel__is_bpf, based on which perf events are enabled, but for the latter (bpf_profiler) a perf event is required. Using evsel__is_bperf to check only bperf produces expected results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: size 136 sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ [...perf_event_attr for other CPUs...] ------------------------------------------------------------ cycles: 309426 169009 169009 time counts unit events 10.010091271 309426 cycles The final numbers correspond (at least in the level of magnitude) to the same metric obtained via bpftool. Fixes: 112cb56164bc2108 ("perf stat: Introduce config stat.bpf-counter-events") Reviewed-by: Song Liu <song@kernel.org> Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com> Tested-by: Song Liu <song@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230412182316.11628-1-9erthalion6@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-04Merge tag 'mm-stable-2023-05-03-16-22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more MM updates from Andrew Morton: - Some DAMON cleanups from Kefeng Wang - Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE ioctl's behavior more similar to KSM's behavior. [ Andrew called these "final", but I suspect we'll have a series fixing up the fact that the last commit in the dmapools series in the previous pull seems to have unintentionally just reverted all the other commits in the same series.. - Linus ] * tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: hwpoison: coredump: support recovery from dump_user_range() mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page() mm/ksm: move disabling KSM from s390/gmap code to KSM code selftests/ksm: ksm_functional_tests: add prctl unmerge test mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0 mm/damon/paddr: fix missing folio_sz update in damon_pa_young() mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate() mm/damon/paddr: minor refactor of damon_pa_pageout()
2023-05-04Merge tag 'loongarch-6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Better backtraces for humanization - Relay BCE exceptions to userland as SIGSEGV - Provide kernel fpu functions - Optimize memory ops (memset/memcpy/memmove) - Optimize checksum and crc32(c) calculation - Add ARCH_HAS_FORTIFY_SOURCE selection - Add function error injection support - Add ftrace with direct call support - Add basic perf tools support * tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits) tools/perf: Add basic support for LoongArch LoongArch: ftrace: Add direct call trampoline samples support LoongArch: ftrace: Add direct call support LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses LoongArch: Add support for function error injection LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection LoongArch: crypto: Add crc32 and crc32c hw acceleration LoongArch: Add checksum optimization for 64-bit system LoongArch: Optimize memory ops (memset/memcpy/memmove) LoongArch: Provide kernel fpu functions LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs() LoongArch: Humanize the ESTAT line when showing registers LoongArch: Humanize the ECFG line when showing registers LoongArch: Humanize the EUEN line when showing registers LoongArch: Humanize the PRMD line when showing registers LoongArch: Humanize the CRMD line when showing registers LoongArch: Fix format of CSR lines during show_regs() ...
2023-05-03perf test record+probe_libc_inet_pton: Fix call chain match on x86_64Thomas Richter
The test case probe libc's inet_pton & backtrace it with ping fails with Fedora 38 on x86_64. Function getaddrinfo() does not show up in the call chain anymore: # ./perf script ping 1803 [000] 728.567146: probe_libc:inet_pton: (7f5275afc840) 133840 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6) 27b4a __libc_start_call_main+0x7a (/usr/lib64/libc.so.6) 27c0b __libc_start_main@@GLIBC_2.34+0x8b (/usr/lib64/libc.so.6) ping 1803 [000] 728.567184: probe_libc:inet_pton: (7f5275afc840) 133840 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6) 493e main+0xcde (/usr/bin/ping) 27b4a __libc_start_call_main+0x7a (/usr/lib64/libc.so.6) # which causes the test case to fail. Remove function getaddrinfo() from list of expected functions. Output before: # ./perf test 'libc' 91: probe libc's inet_pton & backtrace it with ping : FAILED! # Output after: # ./perf test 'libc' 91: probe libc's inet_pton & backtrace it with ping : Ok # Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/r/20230503081255.3372986-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-03perf test record+probe_libc_inet_pton: Fix call chain match on s390Thomas Richter
With Fedora 38 the perf test 86 probe libc's inet_pton fails on s390. The call chain of the ping command changed. The functions text_to_binary_address() and gaih_inet() do not show up in the call chain anymore. Output before: # ./perf test -v 86 86: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 541050 fgrep: warning: fgrep is obsolescent; using grep -F fgrep: warning: fgrep is obsolescent; using grep -F BFD: DWARF error: could not find variable specification at offset 0x22011 ... ping 541078 [002] 348826.679581: probe_libc:inet_pton_1: (3ffad84b940) 14b940 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6) 10e9c3 __GI_getaddrinfo+0xeb3 (inlined) 4397 main+0x737 (/usr/bin/ping) FAIL: expected backtrace entry "gaih_inet.*\+0x[[:xdigit:]]\ +[[:space:]]\(/usr/lib64/libc.so.6|inlined\)$" got "4397 main+0x737 (/usr/bin/ping)" test child finished with -1 ---- end ---- probe libc's inet_pton & backtrace it with ping: FAILED! # Output after: # ./perf test -v 86 86: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 541098 fgrep: warning: fgrep is obsolescent; using grep -F fgrep: warning: fgrep is obsolescent; using grep -F BFD: DWARF error: could not find variable specification at offset 0x309d1 ... ping 541126 [006] 349309.099067: probe_libc:inet_pton_1: (3ffb7f4b940) 14b940 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6) 10e9c3 __GI_getaddrinfo+0xeb3 (inlined) 4397 main+0x737 (/usr/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok # Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/r/20230503081134.3372415-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-03selftests: netfilter: fix libmnl pkg-config usageJeremy Sowden
1. Don't hard-code pkg-config 2. Remove distro-specific default for CFLAGS 3. Use pkg-config for LDLIBS Fixes: a50a88f026fb ("selftests: netfilter: fix a build error on openSUSE") Suggested-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-02selftests/ksm: ksm_functional_tests: add prctl unmerge testDavid Hildenbrand
Let's test whether setting PR_SET_MEMORY_MERGE to 0 after setting it to 1 will unmerge pages, similar to how setting MADV_UNMERGEABLE after setting MADV_MERGEABLE would. Link: https://lkml.kernel.org/r/20230422205420.30372-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Stefan Roesch <shr@devkernel.io> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-02perf tracepoint: Fix memory leak in is_valid_tracepoint()Yang Jihong
When is_valid_tracepoint() returns 1, need to call put_events_file() to free `dir_path`. Fixes: 25a7d914274de386 ("perf parse-events: Use get/put_events_file()") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230421025953.173826-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 04:43:17 +0000