| Age | Commit message (Collapse) | Author |
|---|
|
When copying the EXTRA context our calculation of the amount of data we
need to copy is incorrect, we only calculate the amount of data needed
within uc_mcontext.__reserved, not taking account of the fixed portion
of the context. Add in the offset of the reserved data so that we copy
everything we should.
This will only cause test failures in cases where the last context in the
EXTRA context is smaller than the missing data since we don't currently
validate any of the register data and all the buffers we copy into are
statically allocated so default to zero meaning that if we walk beyond the
end of what we copied we'll encounter what looks like a context with magic
and length both 0 which is a valid terminator record.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230201-arm64-kselftest-full-extra-v1-1-93741f32dd29@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
comprehensive
We have two IS1 filters of the OCELOT_VCAP_KEY_ANY key type (the one with
"action vlan pop" and the one with "action vlan modify") and one of the
OCELOT_VCAP_KEY_IPV4 key type (the one with "action skbedit priority").
But we have no IS1 filter with the OCELOT_VCAP_KEY_ETYPE key type, and
there was an uncaught breakage there.
To increase test coverage, convert one of the OCELOT_VCAP_KEY_ANY
filters to OCELOT_VCAP_KEY_ETYPE, by making the filter also match on the
MAC SA of the traffic sent by mausezahn, $h1_mac.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230205192409.1796428-2-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
memblock_free_late()."
This reverts commit 115d9d77bb0f9152c60b6e8646369fa7f6167593.
The pages being freed by memblock_free_late() have already been
initialized, but if they are in the deferred init range,
__free_one_page() might access nearby uninitialized pages when trying to
coalesce buddies. This can, for example, trigger this BUG:
BUG: unable to handle page fault for address: ffffe964c02580c8
RIP: 0010:__list_del_entry_valid+0x3f/0x70
<TASK>
__free_one_page+0x139/0x410
__free_pages_ok+0x21d/0x450
memblock_free_late+0x8c/0xb9
efi_free_boot_services+0x16b/0x25c
efi_enter_virtual_mode+0x403/0x446
start_kernel+0x678/0x714
secondary_startup_64_no_verify+0xd2/0xdb
</TASK>
A proper fix will be more involved so revert this change for the time
being.
Fixes: 115d9d77bb0f ("mm: Always release pages to the buddy allocator in memblock_free_late().")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/20230207082151.1303-1-dev@aaront.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230206092229.46416-1-colin.i.king@gmail.com
|
|
In a previous commit, Ubuntu kernel code version is correctly set
by retrieving the information from /proc/version_signature.
commit<5b3d72987701d51bf31823b39db49d10970f5c2d>
(libbpf: Improve LINUX_VERSION_CODE detection)
The /proc/version_signature file doesn't present in at least the
older versions of Debian distributions (eg, Debian 9, 10). The Debian
kernel has a similar issue where the release information from uname()
syscall doesn't give the kernel code version that matches what the
kernel actually expects. Below is an example content from Debian 10.
release: 4.19.0-23-amd64
version: #1 SMP Debian 4.19.269-1 (2022-12-20) x86_64
Debian reports incorrect kernel version in utsname::release returned
by uname() syscall, which in older kernels (Debian 9, 10) leads to
kprobe BPF programs failing to load due to the version check mismatch.
Fortunately, the correct kernel code version presents in the
utsname::version returned by uname() syscall in Debian kernels. This
change adds another get kernel version function to handle Debian in
addition to the previously added get kernel version function to handle
Ubuntu. Some minor refactoring work is also done to make the code more
readable.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Signed-off-by: Ho-Ren (Jack) Chuang <horenchuang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230203234842.2933903-1-hao.xiang@bytedance.com
|
|
The VDSO implementation for getcpu() has been wired up on 32bit so warn if
missing.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221125094216.3663444-4-bigeasy@linutronix.de
|
|
Add a suite covering mcast_n_groups and mcast_max_groups bridge features.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The testsuite that checks for mcast_max_groups functionality will need to
wipe the added groups as well. Add helpers to build an IGMP or MLD packets
announcing that host is leaving a given group.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The testsuite that checks for mcast_max_groups functionality will need
to generate IGMP and MLD packets with configurable number of (S,G)
addresses. To that end, further extend igmpv3_is_in_get() and
mldv2_is_in_get() to allow a list of IP addresses instead of one
address.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to generate IGMPv3 and MLDv2 packets on the fly, the
functions that generate these packets need to be able to generate
packets for different groups and different sources. Generating MLDv2
packets further needs the source address of the packet for purposes of
checksum calculation. Add the necessary parameters, and generate the
payload accordingly by dispatching to helpers added in the previous
patches.
Adjust the sole client, bridge_mdb.sh, as well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to generate IGMPv3 and MLDv2 packets on the fly, we will need
helpers to calculate the packet checksum.
The approach presented in this patch revolves around payload templates
for mausezahn. These are mausezahn-like payload strings (01:23:45:...)
with possibly one 2-byte sequence replaced with the word PAYLOAD. The
main function is payload_template_calc_checksum(), which calculates
RFC 1071 checksum of the message. There are further helpers to then
convert the checksum to the payload format, and to expand it.
For IPv6, MLDv2 message checksum is computed using a pseudoheader that
differs from the header used in the payload itself. The fact that the
two messages are different means that the checksum needs to be
returned as a separate quantity, instead of being expanded in-place in
the payload itself. Furthermore, the pseudoheader includes a length of
the message. Much like the checksum, this needs to be expanded in
mausezahn format. And likewise for number of addresses for (S,G)
entries. Thus we have several places where a computed quantity needs
to be presented in the payload format. Add a helper u16_to_bytes(),
which will be used in all these cases.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to generate IGMPv3 and MLDv2 packets on the fly, we will need
helpers to expand IPv4 and IPv6 addresses given as parameters in
mausezahn payload notation. Add helpers that do it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the letter missing from the word "INCLUDE".
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These functions will be helpful for other testsuites as well. Extract them
to a common place.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Yet another fix for non-CPU accesses to the memory backing the
VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW behaviour
after the fix that went in ealier in the cycle"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: aarch64: Test read-only PT memory regions
KVM: selftests: aarch64: Fix check of dirty log PT write
KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs
KVM: selftests: aarch64: Relax userfaultfd read vs. write checks
KVM: arm64: Allow no running vcpu on saving vgic3 pending table
KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status
KVM: arm64: Add helper vgic_write_guest_lock()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.2, take #3
- Yet another fix for non-CPU accesses to the memory backing
the VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW
behaviour after the fix that went in ealier in the cycle
|
|
Fix a simple typo in the documentation for bpf_perf_prog_read_value.
Signed-off-by: Florian Lehner <dev@der-flo.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230203121439.25884-1-dev@der-flo.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes, mainly for MM. 13 are cc:stable"
* tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()
Kconfig.debug: fix the help description in SCHED_DEBUG
mm/swapfile: add cond_resched() in get_swap_pages()
mm: use stack_depot_early_init for kmemleak
Squashfs: fix handling and sanity checking of xattr_ids count
sh: define RUNTIME_DISCARD_EXIT
highmem: round down the address passed to kunmap_flush_on_unmap()
migrate: hugetlb: check for hugetlb shared PMD in node migration
mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups
Revert "mm: kmemleak: alloc gray object for reserved region with direct map"
freevxfs: Kconfig: fix spelling
maple_tree: should get pivots boundary by type
.mailmap: update e-mail address for Eugen Hristev
mm, mremap: fix mremap() expanding for vma's with vm_ops->close()
squashfs: harden sanity check in squashfs_read_xattr_id_table
ia64: fix build error due to switch case label appearing next to declaration
mm: multi-gen LRU: fix crash during cgroup migration
Revert "mm: add nodes= arg to memory.reclaim"
zsmalloc: fix a race with deferred_handles storing
...
|
|
This release adds following change:
- Minor fixes for coverity static analysis
- Don't read cpufreq on offline CPUs
- SST turbo-freq enable on auto mode when user disables SMT from
kernel command line
- Fix uncore frequency display
- Set uncore frequency max/min limits on perf level change
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When perf level is changed, uncore limits can change. Set the uncore
limits via Linux uncore sysfs, when user changes perf level with
-o option.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Need memory frequency quirk as Sapphire Rapids in Emerald Rapids.
So add Emerald Rapids CPU model check in is_spr_platform().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: Subject, changelog and code edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Uncore P1 is not uncore minmum frequency. This is uncore base frequency.
Correct display from uncore-frequency-min(MHz)
to uncore-frequency-base(Mhz).
To get uncore min frequency use mailbox command
CONFIG_TDP_GET_RATIO_INFO. Use this mailbox to get uncore frequency
limits when present.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When SMT is disabled from kernel command line, sibling CPUs still
appears in the sysfs as offline CPUs. This is a problem when turbo-freq
is enabled in auto mode. They are still assigned to CLOS value
of 3 as they are still in the present CPU list. But they are not in the
sibling list of a CPU. When the CPU is a high priority CPU, because of
sibling it will be still set to CLOS to 3 as CLOS is assigned at core
level not at CPU level.
So, avoid setting CLOS 3 to offline CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Due to some recent kernel changes, reading cpufreq attributes like
scaling_max_freq on offline CPUs returns error. So avoid reading
cpufreq attributes on offline CPUs.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
strlen() and strtok() takes null-termimated strings as input.
Make sure these strings are null-terminated before using them.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove the duplicate dup() invocation.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add handling for open() failure case to make sure a valid file
descriptor is passed to dup().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
variable 'non_block' is always 0, thus remove the variable and the
handling for "non_block != 0" case.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
struct isst_id *id is a pointer, comparing it with less than zero is wrong.
The check is there to make sure the id->pkg and id->die is set to -1, when
it is illegal or unavailable. Here comparing with MAX_PACKAGE_COUNT and
MAX_DIE_PER_PACKAGE is sufficient.
Hence remove the wrong check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: Subject and changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The number of online cpu may be not equal to possible cpu.
"bpftool prog profile" can not create pmu event on possible
but on online cpu.
$ dmidecode -s system-product-name
PowerEdge R620
$ cat /sys/devices/system/cpu/possible
0-47
$ cat /sys/devices/system/cpu/online
0-31
Disable cpu dynamically:
$ echo 0 > /sys/devices/system/cpu/cpuX/online
If one cpu is offline, perf_event_open will return ENODEV.
To fix this issue:
* check value returned and skip offline cpu.
* close pmu_fd immediately on error path, avoid fd leaking.
Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Signed-off-by: Tonghao Zhang <tong@infragraf.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230202131701.29519-1-tong@infragraf.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Introduce xdp_features tool in order to test XDP features supported by
the NIC and match them against advertised ones.
In order to test supported/advertised XDP features, xdp_features must
run on the Device Under Test (DUT) and on a Tester device.
xdp_features opens a control TCP channel between DUT and Tester devices
to send control commands from Tester to the DUT and a UDP data channel
where the Tester sends UDP 'echo' packets and the DUT is expected to
reply back with the same packet. DUT installs multiple XDP programs on the
NIC to test XDP capabilities and reports back to the Tester some XDP stats.
Currently xdp_features supports the following XDP features:
- XDP_DROP
- XDP_ABORTED
- XDP_PASS
- XDP_TX
- XDP_REDIRECT
- XDP_NDO_XMIT
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/7c1af8e7e6ef0614cf32fa9e6bdaa2d8d605f859.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce a self-test to verify libbpf bpf_xdp_query capability to dump
the xdp-features supported by the device (lo and veth in this case).
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/534550318a2c883e174811683909544c63632f05.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extend bpf_xdp_query routine in order to get XDP/XSK supported features
of netdev over route netlink interface.
Extend libbpf netlink implementation in order to support netlink_generic
protocol.
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/a72609ef4f0de7fee5376c40dbf54ad7f13bfb8d.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This is a preliminary patch in order to introduce netlink_generic
protocol support to libbpf.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/7878a54667e74afeec3ee519999c044bd514b44c.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a Netlink spec-compatible family for netdevs.
This is a very simple implementation without much
thought going into it.
It allows us to reap all the benefits of Netlink specs,
one can use the generic client to issue the commands:
$ ./cli.py --spec netdev.yaml --dump dev_get
[{'ifindex': 1, 'xdp-features': set()},
{'ifindex': 2, 'xdp-features': {'basic', 'ndo-xmit', 'redirect'}},
{'ifindex': 3, 'xdp-features': {'rx-sg'}}]
the generic python library does not have flags-by-name
support, yet, but we also don't have to carry strings
in the messages, as user space can get the names from
the spec.
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/327ad9c9868becbe1e601b580c962549c8cd81f2.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Just silence the following checkpatch warning:
WARNING: Possible comma where semicolon could be used
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1675319486-27744-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Just silence the following build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1675319486-27744-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
xdp_synproxy/xdp fails in CI with:
Error: bpf_tc_hook_create: File exists
The XDP version of the test should not be calling bpf_tc_hook_create();
the reason it's happening anyway is that if we don't specify --tc on the
command line, tc variable remains uninitialized.
Fixes: 784d5dc0efc2 ("selftests/bpf: Add selftests for raw syncookie helpers in TC mode")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230202235335.3403781-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
net/core/gro.c
7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO")
b1a78b9b9886 ("net: add support for ipv4 big tcp")
https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- phy: fix null-deref in phy_attach_direct
- mac802154: fix possible double free upon parsing error
Previous releases - regressions:
- bpf: preserve reg parent/live fields when copying range info,
prevent mis-verification of programs as safe
- ip6: fix GRE tunnels not generating IPv6 link local addresses
- phy: dp83822: fix null-deref on DP83825/DP83826 devices
- sctp: do not check hb_timer.expires when resetting hb_timer
- eth: mtk_sock: fix SGMII configuration after phylink conversion
Previous releases - always broken:
- eth: xdp: execute xdp_do_flush() before napi_complete_done()
- skb: do not mix page pool and page referenced frags in GRO
- bpf:
- fix a possible task gone issue with bpf_send_signal[_thread]()
- fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache
- add missing btf_put to register_btf_id_dtor_kfuncs
- sockmap: fon't let sock_map_{close,destroy,unhash} call itself
- gso: fix null-deref in skb_segment_list()
- mctp: purge receive queues on sk destruction
- fix UaF caused by accept on already connected socket in exotic
socket families
- tls: don't treat list head as an entry in tls_is_tx_ready()
- netfilter: br_netfilter: disable sabotage_in hook after first
suppression
- wwan: t7xx: fix runtime PM implementation
Misc:
- MAINTAINERS: spring cleanup of networking maintainers"
* tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
mtk_sgmii: enable PCS polling to allow SFP work
net: mediatek: sgmii: fix duplex configuration
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
MAINTAINERS: update SCTP maintainers
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
mailmap: add John Crispin's entry
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
virtio-net: Keep stop() to follow mirror sequence of open()
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
...
|
|
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
A few scripts in tools/power still refer to this older debugfs path, so
let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
benchmarking
The test tool can check that the zerocopy number of completions value is
valid taking into consideration the number of datagram send calls. This can
catch the system into a state where the datagrams are still in the system
(for example in a qdisk, waiting for the network interface to return a
completion notification, etc).
This change adds a retry logic of computing the number of completions up to
a configurable (via CLI) timeout (default: 2 seconds).
Fixes: 79ebc3c26010 ("net/udpgso_bench_tx: options to exercise TX CMSG")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-4-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
"udpgro_bench.sh" invokes udpgso_bench_rx/udpgso_bench_tx programs
subsequently and while doing so, there is a chance that the rx one is not
ready to accept socket connections. This racing bug could fail the test
with at least one of the following:
./udpgso_bench_tx: connect: Connection refused
./udpgso_bench_tx: sendmsg: Connection refused
./udpgso_bench_tx: write: Connection refused
This change addresses this by making udpgro_bench.sh wait for the rx
program to be ready before firing off the tx one - up to a 10s timeout.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-3-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Leaving unrecognized arguments buried in the output, can easily hide a
CLI/script typo. Avoid this by exiting when wrong arguments are provided to
the udpgso_bench test programs.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-2-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change fixes the following compiler warning:
/usr/include/x86_64-linux-gnu/bits/error.h:40:5: warning: ‘gso_size’ may
be used uninitialized [-Wmaybe-uninitialized]
40 | __error_noreturn (__status, __errnum, __format,
__va_arg_pack ());
|
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
udpgso_bench_rx.c: In function ‘main’:
udpgso_bench_rx.c:253:23: note: ‘gso_size’ was declared here
253 | int ret, len, gso_size, budget = 256;
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-1-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The linux/net_tstamp.h is included more than once, thus clean it up.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/202301311440516312161@zte.com.cn
|
|
We only need to consume TX completion instead of refilling 'fill' ring.
It's currently not an issue because we never RX more than 8 packets.
Fixes: e2a46d54d7a1 ("selftests/bpf: Verify xdp_metadata xdp->af_xdp path")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230201233640.367646-1-sdf@google.com
|
|
The ifname char pointer is taken directly from the command line
as input and the string is copied directly into struct ifreq
via strcpy. This makes it easy to corrupt other members of ifreq
and generally do stack overflows.
Most often the ioctl will fail with:
./xdp_hw_metadata: ioctl(SIOCETHTOOL): Bad address
As people will likely copy-paste code for getting NIC queue
channels (rxq_num) and enabling HW timestamping (hwtstamp_ioctl)
lets make this code a bit more secure by using strncpy.
Fixes: 297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/167527272543.937063.16993147790832546209.stgit@firesoul
|
|
The glibc error reporting function error():
void error(int status, int errnum, const char *format, ...);
The status argument should be a positive value between 0-255 as it
is passed over to the exit(3) function as the value as the shell exit
status. The least significant byte of status (i.e., status & 0xFF) is
returned to the shell parent.
Fix this by using 1 instead of -1. As 1 corresponds to C standard
constant EXIT_FAILURE.
Fixes: 297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/167527272038.937063.9137108142012298120.stgit@firesoul
|
|
Using xdp_hw_metadata I experince Segmentation fault after seeing
"detaching bpf program....".
On my system the segfault happened when accessing bpf_obj->skeleton
in xdp_hw_metadata__destroy(bpf_obj) call. That doesn't make any sense
as this memory have not been freed by program at this point in time.
Prior to calling xdp_hw_metadata__destroy(bpf_obj) the function
close_xsk() is called for each RX-queue xsk. The real bug lays
in close_xsk() that unmap via munmap() the wrong memory pointer.
The call xsk_umem__delete(xsk->umem) will free xsk->umem, thus
the call to munmap(xsk->umem, UMEM_SIZE) will have unpredictable
behavior. And man page explain subsequent references to these
pages will generate SIGSEGV.
Unmapping xsk->umem_area instead removes the segfault.
Fixes: 297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/167527271533.937063.5717065138099679142.stgit@firesoul
|
