Age | Commit message (Collapse) | Author |
|
The config for the serial console for riscv,
CONFIG_SERIAL_EARLYCON_RISCV_SBI, added a dependency,
CONFIG_RISCV_SBI_V01, at some point, so add that in to the base arch
config.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
It's often desirable (particularly in test automation) to run as many
tests as possible. This config enables all the tests which work as
builtins under UML at present, increasing the total tests run from 156
to 342 (not counting 36 'skipped' tests).
They can be run with:
./tools/testing/kunit/kunit.py run
--kunitconfig=./tools/testing/kunit/configs/all_tests_uml.config
This acts as an in-between point between the KUNIT_ALL_TESTS config
(which enables only tests whose dependencies are already enabled), and
the kunit_tool --alltests option, which tries to use allyesconfig,
taking a very long time to build and breaking very often.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This primarily comes from running pylint over kunit tool code and
ignoring some warnings we don't care about.
If we ever got a fully clean setup, we could add this to run_checks.py,
but we're not there yet.
Fix things like
* Drop unused imports
* check `is None`, not `== None` (see PEP 8)
* remove redundant parens around returns
* remove redundant `else` / convert `elif` to `if` where appropriate
* rename make_arch_qemuconfig() param to base_kunitconfig (this is the
name used in the subclass, and it's a better one)
* kunit_tool_test: check the exit code for SystemExit (could be 0)
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There should be no behavioral changes from this patch.
This patch removes redundant comment text, inlines a function used in
only one place, and other such minor tweaks.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Consider this invocation
$ ./tools/testing/kunit/kunit.py parse <<EOF
TAP version 14
1..2
ok 1 - suite
# Subtest: no_tests_suite
# catastrophic error!
not ok 1 - no_tests_suite
EOF
It will have a 0 exit code even though there's a "not ok".
Consider this one:
$ ./tools/testing/kunit/kunit.py parse <<EOF
TAP version 14
1..2
ok 1 - suite
not ok 1 - no_tests_suite
EOF
It will a non-zero exit code.
Why?
We have this line in the kunit_parser.py
> parent_test = parse_test_header(lines, test)
where we have special handling when we see "# Subtest" and we ignore the
explicit reported "not ok 1" status!
Also, NO_TESTS at a suite-level only results in a non-zero status code
where then there's only one suite atm.
This change is the minimal one to make sure we don't overwrite it.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This logic depends on the kernel logging a message containing
'kunit test case crashed', but there is no corresponding logic to do so.
This is likely a relic of the revision process KUnit initially went
through when being upstreamed.
Delete it given
1) it's been missing for years and likely won't get implemented
2) the parser has been moving to be a more general KTAP parser,
kunit-only magic like this isn't how we'd want to implement it.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In case a distribution enables branch protection by default do as we do for
the main kernel and explicitly disable branch protection when building the
test case for having BTI disabled to ensure it doesn't get turned on by the
toolchain defaults.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220516182213.727589-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The "bti" selftests are built with -nostdlib, which apparently
automatically creates a statically linked binary, which is what we want
and need for BTI (to avoid interactions with the dynamic linker).
However this is not true when building a PIE binary, which some
toolchains (Ubuntu) configure as the default.
When compiling btitest with such a toolchain, it will create a
dynamically linked binary, which will probably fail some tests, as the
dynamic linker might not support BTI:
===================
TAP version 13
1..18
not ok 1 nohint_func/call_using_br_x0
not ok 2 nohint_func/call_using_br_x16
not ok 3 nohint_func/call_using_blr
....
===================
To make sure we create static binaries, add an explicit -static on the
linker command line. This forces static linking even if the toolchain
defaults to PIE builds, and fixes btitest runs on BTI enabled machines.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Fixes: 314bcbf09f14 ("kselftest: arm64: Add BTI tests")
Link: https://lore.kernel.org/r/20220511172129.2078337-1-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
* kvm-arm64/psci-suspend:
: .
: Add support for PSCI SYSTEM_SUSPEND and allow userspace to
: filter the wake-up events.
:
: Patches courtesy of Oliver.
: .
Documentation: KVM: Fix title level for PSCI_SUSPEND
selftests: KVM: Test SYSTEM_SUSPEND PSCI call
selftests: KVM: Refactor psci_test to make it amenable to new tests
selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
KVM: arm64: Implement PSCI SYSTEM_SUSPEND
KVM: arm64: Add support for userspace to suspend a vCPU
KVM: arm64: Return a value from check_vcpu_requests()
KVM: arm64: Rename the KVM_REQ_SLEEP handler
KVM: arm64: Track vCPU power state using MP state values
KVM: arm64: Dedupe vCPU power off helpers
KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/hcall-selection:
: .
: Introduce a new set of virtual sysregs for userspace to
: select the hypercalls it wants to see exposed to the guest.
:
: Patches courtesy of Raghavendra and Oliver.
: .
KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run
KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace
Documentation: Fix index.rst after psci.rst renaming
selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list
selftests: KVM: aarch64: Introduce hypercall ABI test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
tools: Import ARM SMCCC definitions
Docs: KVM: Add doc for the bitmap firmware registers
Docs: KVM: Rename psci.rst to hypercalls.rst
KVM: arm64: Add vendor hypervisor firmware register
KVM: arm64: Add standard hypervisor firmware register
KVM: arm64: Setup a framework for hypercall bitmap firmware registers
KVM: arm64: Factor out firmware register handling from psci.c
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
To pick up fixes from perf/urgent.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
New netlink attributes IFLA_TSO_MAX_SIZE and IFLA_TSO_MAX_SEGS
are used to report to user-space the device TSO limits.
ip -d link sh dev eth1
...
tso_max_size 65536 tso_max_segs 65535
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the MTE tests there are several places where we use chains of if
statements to open code what could be written as switch statements, move
over to switch statements to make the idiom clearer.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510164520.768783-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Void pointers may be freely used with other pointer types in C, any casts
between void * and other pointer types serve no purpose other than to
mask potential warnings. Drop such casts from check_tags_inclusion to
help with future review of the code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The MTE check_tags_inclusion test uses the mte_switch_mode() helper but
ignores the return values it generates meaning we might not be testing
the things we're trying to test, fail the test if it reports an error.
The helper will log any errors it returns.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
mte_switch_mode() currently rejects attempts to set a zero tag however
there are tests such as check_tags_inclusion which attempt to cover cases
with zero tags using mte_switch_mode(). Since it is not clear why we are
rejecting zero tags change the test to accept them.
The issue has not previously been as apparent as it should be since the
return value of mte_switch_mode() was not always checked in the callers
and the tests weren't otherwise failing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When we detect a problem in verify_mte_pointer_validity() while checking
tags we don't log what the problem was which makes debugging harder. Add
some diagnostics.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix two NDEBUG warnings in 'perf bench numa'
- Fix ARM coresight `perf test` failure
- Sync linux/kvm.h with the kernel sources
- Add James and Mike as Arm64 performance events reviewers
* tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
MAINTAINERS: Add James and Mike as Arm64 performance events reviewers
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf tests: Fix coresight `perf test` failure.
perf bench: Fix two numa NDEBUG warnings
|
|
Add and delete a bunch of endpoints and verify the
respect of configured limits.
This covers the codepath introduced by the previous patch.
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, dumping almost all BTFs specified by id requires
using the -B option to pass the base BTF. For kernel module
BTFs the vmlinux BTF sysfs path should work.
This patch simplifies dumping by ID usage by loading
vmlinux BTF from sysfs as base, if base BTF was not specified
and the ID corresponds to a kernel module BTF.
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20220513121743.12411-1-larysa.zaremba@intel.com
|
|
usdt_400 test case relies on compiler using the same arg spec for
usdt_400 USDT. This assumption breaks with Clang (Clang generates
different arg specs with varying offsets relative to %rbp), so simplify
this further and hard-code the constant which will guarantee that arg
spec is the same across all 400 inlinings.
Fixes: 630301b0d59d ("selftests/bpf: Add basic USDT selftests")
Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220513173703.89271-1-andrii@kernel.org
|
|
Commit 54de76c01239 ("kselftest/cgroup: fix test_stress.sh to use OUTPUT
dir") changes the test_core command path from . to $OUTPUT. However,
variable OUTPUT may not be defined if the command is run interactively.
Fix that by using ${OUTPUT:-.} to cover both cases.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Seven MM fixes, three of which address issues added in the most recent
merge window, four of which are cc:stable.
Three non-MM fixes, none very serious"
[ And yes, that's a real pull request from Andrew, not me creating a
branch from emailed patches. Woo-hoo! ]
* tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add a mailing list for DAMON development
selftests: vm: Makefile: rename TARGETS to VMTARGETS
mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool
mailmap: add entry for martyna.szapar-mudlaw@intel.com
arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map
procfs: prevent unprivileged processes accessing fdinfo dir
mm: mremap: fix sign for EFAULT error return value
mm/hwpoison: use pr_err() instead of dump_page() in get_any_page()
mm/huge_memory: do not overkill when splitting huge_zero_page
Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"
|
|
alloc_pagecache_max_30M() in the cgroup memcg tests performs a 50MB
pagecache allocation, which it expects to be capped at 30MB due to the
calling process having a memory.high setting of 30MB. After the
allocation, the function contains a check that verifies that MB(29) <
memory.current <= MB(30). This check can actually fail
non-deterministically.
The testcases that use this function are test_memcg_high() and
test_memcg_max(), which set memory.min and memory.max to 30MB respectively
for the cgroup under test. The allocation can slightly exceed this number
in both cases, and for memory.max, the process performing the allocation
will not have the OOM killer invoked as it's performing a pagecache
allocation. This patchset therefore updates the above check to instead
use the verify_close() helper function.
Link: https://lkml.kernel.org/r/20220423155619.3669555-6-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
test_memcg_sock() in the cgroup memcg tests, verifies expected memory
accounting for sockets. The test forks a process which functions as a TCP
server, and sends large buffers back and forth between itself (as the TCP
client) and the forked TCP server. While doing so, it verifies that
memory.current and memory.stat.sock look correct.
There is currently a check in tcp_client() which asserts memory.current >=
memory.stat.sock. This check is racy, as between memory.current and
memory.stat.sock being queried, a packet could come in which causes
mem_cgroup_charge_skmem() to be invoked. This could cause
memory.stat.sock to exceed memory.current. Reversing the order of
querying doesn't address the problem either, as memory may be reclaimed
between the two calls. Instead, this patch just removes that assertion
altogether, and instead relies on the values_close() check that follows to
validate the expected accounting.
Link: https://lkml.kernel.org/r/20220423155619.3669555-5-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test_memcg_oom_group_leaf_events() testcase in the cgroup memcg tests
validates that processes in a group that perform allocations exceeding
memory.oom.group are killed. It also validates that the
memory.events.oom_kill events are properly propagated in this case.
Commit 06e11c907ea4 ("kselftests: memcg: update the oom group leaf events
test") fixed test_memcg_oom_group_leaf_events() to account for the fact
that the memory.events.oom_kill events in a child cgroup is propagated up
to its parent. This behavior can actually be configured by the
memory_localevents mount option, so this patch updates the testcase to
properly account for the possible presence of this mount option.
Link: https://lkml.kernel.org/r/20220423155619.3669555-4-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test_memcg_low() testcase in test_memcontrol.c verifies the expected
behavior of groups using the memory.low knob. Part of the testcase
verifies that a group with memory.low that experiences reclaim due to
memory pressure elsewhere in the system, observes memory.events.low events
as a result of that reclaim.
In commit 8a931f801340 ("mm: memcontrol: recursive memory.low
protection"), the memory controller was updated to propagate memory.low
and memory.min protection from a parent group to its children via a
configurable memory_recursiveprot mount option. This unfortunately broke
the memcg tests, which asserts that a sibling that experienced reclaim but
had a memory.low value of 0, would not observe any memory.low events.
This patch updates test_memcg_low() to account for the new behavior
introduced by memory_recursiveprot.
So as to make the test resilient to multiple configurations, the patch
also adds a new proc_mount_contains() helper that checks for a string in
/proc/mounts, and is used to toggle behavior based on whether the default
memory_recursiveprot was present.
Link: https://lkml.kernel.org/r/20220423155619.3669555-3-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix bugs in memcontroller cgroup tests", v2.
tools/testing/selftests/cgroup/test_memcontrol.c contains a set of
testcases which validate expected behavior of the cgroup memory
controller. Roman Gushchin recently sent out a patchset that fixed a few
issues in the test. This patchset continues that effort by fixing a few
more issues that were causing non-deterministic failures in the suite.
With this patchset, I'm unable to reproduce any more errors after running
the tests in a continuous loop for many iterations. Before, I was able to
reproduce at least one of the errors fixed in this patchset with just one
or two runs.
This patch (of 5):
In test_memcg_min() and test_memcg_low(), there is an array of four
sibling cgroups. All but one of these sibling groups does a 50MB
allocation, and the group that does no allocation is the third of four in
the array. This is not a problem per se, but makes it a bit tricky to do
some assertions in test_memcg_low(), as we want to make assertions on the
siblings based on whether or not they performed allocations. Having a
static index before which all groups have performed an allocation makes
this cleaner.
This patch therefore reorders the sibling groups so that the group that
performs no allocations is the last in the array. A follow-on patch will
leverage this to fix a bug in the test that incorrectly asserts that a
sibling group that had performed an allocation, but only had protection
from its parent, will not observe any memory.events.low events during
reclaim.
Link: https://lkml.kernel.org/r/20220423155619.3669555-1-void@manifault.com
Link: https://lkml.kernel.org/r/20220423155619.3669555-2-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Address the following coccicheck warning:
tools/testing/selftests/vm/userfaultfd.c:1536:21-22: WARNING opportunity
for swap().
tools/testing/selftests/vm/userfaultfd.c:1540:33-34: WARNING opportunity
for swap().
by using swap() for the swapping of variable values and drop
`tmp_area` that is not needed any more.
`swap()` macro in userfaultfd.c is introduced in commit 681696862bc18
("selftests: vm: remove dependecy from internal kernel macros")
It has been tested with gcc (Debian 8.3.0-6) 8.3.0.
Link: https://lkml.kernel.org/r/20220407123141.4998-1-guozhengkui@vivo.com
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After we added support for shmem and hugetlbfs, we can turn uffd-wp test
on always now.
Link: https://lkml.kernel.org/r/20220405014932.15212-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a regression test that validates that mremap fails for vma's that
don't exist.
Link: https://lkml.kernel.org/r/20220427224439.23828-3-dossche.niels@gmail.com
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This commit adds a selftest test case for ensuring the existence and the
permission (read-only) of the 'avail_oprations' DAMON sysfs file.
Link: https://lkml.kernel.org/r/20220426203843.45238-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
machines__find_host() does not exist. Remove declaration.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220513084459.6581-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add 2 benchmarks:
1. Performance of thread creation/exiting in presence of breakpoints.
2. Performance of breakpoint modification in presence of threads.
The benchmarks capture use cases that we are interested in:
using inheritable breakpoints in large highly-threaded applications.
The benchmarks show significant slowdown imposed by breakpoints
(even when they don't fire).
Testing on Intel 8173M with 112 HW threads show:
perf bench --repeat=56 breakpoint thread --breakpoints=0 --parallelism=56 --threads=20
78.675000 usecs/op
perf bench --repeat=56 breakpoint thread --breakpoints=4 --parallelism=56 --threads=20
12967.135714 usecs/op
That's 165x slowdown due to presence of the breakpoints.
perf bench --repeat=20000 breakpoint enable --passive=0 --active=0
1.433250 usecs/op
perf bench --repeat=20000 breakpoint enable --passive=224 --active=0
585.318400 usecs/op
perf bench --repeat=20000 breakpoint enable --passive=0 --active=111
635.953000 usecs/op
That's 408x and 444x slowdown due to presence of threads.
Profiles show some overhead in toggle_bp_slot,
but also very high contention:
90.83% breakpoint-thre [kernel.kallsyms] [k] osq_lock
4.69% breakpoint-thre [kernel.kallsyms] [k] mutex_spin_on_owner
2.06% breakpoint-thre [kernel.kallsyms] [k] __reserve_bp_slot
2.04% breakpoint-thre [kernel.kallsyms] [k] toggle_bp_slot
79.01% breakpoint-enab [kernel.kallsyms] [k] smp_call_function_single
9.94% breakpoint-enab [kernel.kallsyms] [k] llist_add_batch
5.70% breakpoint-enab [kernel.kallsyms] [k] _raw_spin_lock_irq
1.84% breakpoint-enab [kernel.kallsyms] [k] event_function_call
1.12% breakpoint-enab [kernel.kallsyms] [k] send_call_function_single_ipi
0.37% breakpoint-enab [kernel.kallsyms] [k] generic_exec_single
0.24% breakpoint-enab [kernel.kallsyms] [k] __perf_event_disable
0.20% breakpoint-enab [kernel.kallsyms] [k] _perf_event_enable
0.18% breakpoint-enab [kernel.kallsyms] [k] toggle_bp_slot
Committer notes:
Fixup struct init for older compilers:
3 32.90 alpine:3.5 : FAIL clang version 3.8.1 (tags/RELEASE_381/final)
bench/breakpoint.c:49:34: error: missing field 'size' initializer [-Werror,-Wmissing-field-initializers]
struct perf_event_attr attr = {0};
^
1 error generated.
7 37.31 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0)
bench/breakpoint.c:49:34: error: missing field 'size' initializer [-Werror,-Wmissing-field-initializers]
struct perf_event_attr attr = {0};
^
1 error generated.
Signed-off-by: Dmitriy Vyukov <dvyukov@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220505155745.1690906-1-dvyukov@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Convert a bunch of selftests to using newly added high-level BPF map
APIs.
This change exposed that map_kptr selftests allocated too big buffer,
which is fixed in this patch as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220512220713.2617964-2-andrii@kernel.org
|
|
Add high-level API wrappers for most common and typical BPF map
operations that works directly on instances of struct bpf_map * (so
you don't have to call bpf_map__fd()) and validate key/value size
expectations.
These helpers require users to specify key (and value, where
appropriate) sizes when performing lookup/update/delete/etc. This forces
user to actually think and validate (for themselves) those. This is
a good thing as user is expected by kernel to implicitly provide correct
key/value buffer sizes and kernel will just read/write necessary amount
of data. If it so happens that user doesn't set up buffers correctly
(which bit people for per-CPU maps especially) kernel either randomly
overwrites stack data or return -EFAULT, depending on user's luck and
circumstances. These high-level APIs are meant to prevent such
unpleasant and hard to debug bugs.
This patch also adds bpf_map_delete_elem_flags() low-level API and
requires passing flags to bpf_map__delete_elem() API for consistency
across all similar APIs, even though currently kernel doesn't expect
any extra flags for BPF_MAP_DELETE_ELEM operation.
List of map operations that get these high-level APIs:
- bpf_map_lookup_elem;
- bpf_map_update_elem;
- bpf_map_delete_elem;
- bpf_map_lookup_and_delete_elem;
- bpf_map_get_next_key.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220512220713.2617964-1-andrii@kernel.org
|
|
Check that ld_imm64 with src_reg=1 (aka BPF_PSEUDO_FUNC) works
with jit_blinding.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220513011025.13344-2-alexei.starovoitov@gmail.com
|
|
Rarely some of the test cases fail. Make the test more robust by increasing
the timeout of ping commands to 5 seconds.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement a crypto library interface for the s390-native ChaCha20 cipher
algorithm. This allows us to stop to select CRYPTO_CHACHA20 and instead
select CRYPTO_ARCH_HAVE_LIB_CHACHA. This allows BIG_KEYS=y not to build
a whole ChaCha20 crypto infrastructure as a built-in, but build a smaller
CRYPTO_LIB_CHACHA instead.
Make CRYPTO_CHACHA_S390 config entry to look like similar ones on other
architectures. Remove CRYPTO_ALGAPI select as anyway it is selected by
CRYPTO_SKCIPHER.
Add a new test module and a test script for ChaCha20 cipher and its
interfaces. Here are test results on an idle z15 machine:
Data | Generic crypto TFM | s390 crypto TFM | s390 lib
size | enc dec | enc dec | enc dec
-----+--------------------+------------------+----------------
512b | 1545ns 1295ns | 604ns 446ns | 430ns 407ns
4k | 9536ns 9463ns | 2329ns 2174ns | 2170ns 2154ns
64k | 149.6us 149.3us | 34.4us 34.5us | 33.9us 33.1us
6M | 23.61ms 23.11ms | 4223us 4160us | 3951us 4008us
60M | 143.9ms 143.9ms | 33.5ms 33.2ms | 32.2ms 32.1ms
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds a test that has 300 VIPs listening on port 443.
Each VIP:443 will have 80 listening socks by using SO_REUSEPORT.
Thus, it will have 24000 listening socks.
Before removing the port only listening_hash, all socks will be in the
same port 443 bucket and inet_reuseport_add_sock() spends much time to
walk through the bucket. After removing the port only listening_hash
and move all usage to the port+addr lhash2, each bucket in the
ideal case has 80 sk which is much smaller than before.
Here is the test result from a qemu:
Before: listen 24000 socks took 210.210485362 (~210s)
After: listen 24000 socks took 0.207173 (~210ms)
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Build issue in drivers/net/ethernet/sfc/ptp.c
54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static")
49e6123c65da ("net: sfc: fix memory leak due to ptp channel")
https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before:
$ ./tools/testing/kunit/kunit.py parse /dev/null
...
[ERROR] Test : invalid KTAP input!
After:
$ ./tools/testing/kunit/kunit.py parse /dev/null
...
[ERROR] Test <missing>: could not find any KTAP output!
This error message gets printed out when extract_tap_output() yielded no
lines. So while it could be because of malformed KTAP output from KUnit,
it could also be due to not having any KTAP output at all.
Try and make the error message here more clear.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Note: this potentially breaks custom qemu_configs if people are using
them! But the fix for them is simple, don't specify multiple arguments
in one string and don't add on a redundant ''.
It feels a bit iffy to be using a shell in the first place.
There's the usual shenanigans where people could pass in arbitrary shell
commands via --kernel_arg (since we're just adding '' around the
kernel_cmdline) or via a custom qemu_config.
This isn't too much of a concern given the nature of this script (and
the qemu_config file is in python, you can do w/e you want already).
But it does have some other drawbacks.
One example of a kunit-specific pain point:
If the relevant qemu binary is missing, we get output like this:
> /bin/sh: line 1: qemu-system-aarch64: command not found
This in turn results in our KTAP parser complaining about
missing/invalid KTAP, but we don't directly show the error!
It's even more annoying to debug when you consider --raw_output only
shows KUnit output by default, i.e. you need --raw_output=all to see it.
Whereas directly invoking the binary, Python will raise a
FileNotFoundError for us, which is a noisier but more clear.
Making this change requires
* splitting parameters like ['-m 256'] into ['-m', '256'] in
kunit/qemu_configs/*.py
* change [''] to [] in kunit/qemu_configs/*.py since otherwise
QEMU fails w/ 'Device needs media, but drive is empty'
* dropping explicit quoting of the kernel cmdline
* using shlex.quote() when we print what command we're running
so the user can copy-paste and run it
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Before:
> Testing complete. Passed: 137, Failed: 0, Crashed: 0, Skipped: 36, Errors: 0
After:
> Testing complete. Ran 173 tests: passed: 137, skipped: 36
Even with our current set of statuses, the output is a bit verbose.
It could get worse in the future if we add more (e.g. timeout, kasan).
Let's only print the relevant ones.
I had previously been sympathetic to the argument that always
printing out all the statuses would make it easier to parse results.
But now we have commit acd8e8407b8f ("kunit: Print test statistics on
failure"), there are test counts printed out in the raw output.
We don't currently print out an overall total across all suites, but it
would be easy to add, if we see a need for that.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Running cgroup kselftest with O= fails to run the with_stress test due
to hardcoded ./test_core. Find test_core binary using the OUTPUT directory.
Fixes: 1a99fcc035fb ("selftests: cgroup: Run test_core under interfering stress")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
It may lead to kernel panic when execute the following testcase on mips:
# cd tools/testing/selftests/ftrace
# ./ftracetest test.d/kprobe/multiple_kprobes.tc
A preliminary analysis shows that the issue is related with
echo 1 > events/kprobes/enable
after add the 256 probe points.
In order to find the root cause, I want to verify which probe point has
problem, so it is necessary to save kprobe_events to test log.
With this patch, we can get the 256 probe points in the test log through
the following command:
# ./ftracetest test.d/kprobe/multiple_kprobes.tc -vvv -k
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The file libsubcmd.a still exists after make clean, remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/1652258270-6278-3-git-send-email-yangtiezhu@loongson.cn
|
|
When build objtool on x86, the generated file inat-tables.c is in
arch/x86/lib instead of arch/x86, use the correct dir to remove it
when make clean.
$ cd tools/objtool
$ make
[...]
GEN arch/x86/lib/inat-tables.c
[...]
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/1652258270-6278-2-git-send-email-yangtiezhu@loongson.cn
|
|
Initialize perf_cap struct to avoid warning:
CC hfi-events.o
In function ‘process_hfi_event’,
inlined from ‘handle_event’ at hfi-events.c:220:5:
hfi-events.c:184:9: warning: ‘perf_cap.cpu’ may be used
uninitialized [-Wmaybe-uninitialized]
184 | process_level_change(perf_cap->cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hfi-events.c: In function ‘handle_event’:
hfi-events.c:193:25: note: ‘perf_cap.cpu’ was declared here
193 | struct perf_cap perf_cap;
| ^~~~~~~~
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220511171208.211319-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
For Intel SST turbo-freq feature to be enabled, the turbo mode on the
platform must be enabled also. If turbo mode is disabled, display error
while enabling turbo-freq feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220510023421.3930540-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|