| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next,
specifically 26 patches: 5 patches adding/updating selftests,
4 fixes, 3 PREEMPT_RT fixes, and 14 patches to enhance nf_tables):
1) Improve selftest coverage for pipapo 4 bit group format, from
Florian Westphal.
2) Fix incorrect dependencies when compiling a kernel without
legacy ip{6}tables support, also from Florian.
3) Two patches to fix nft_fib vrf issues, including selftest updates
to improve coverage, also from Florian Westphal.
4) Fix incorrect nesting in nft_tunnel's GENEVE support, from
Fernando F. Mancera.
5) Three patches to fix PREEMPT_RT issues with nf_dup infrastructure
and nft_inner to match in inner headers, from Sebastian Andrzej Siewior.
6) Integrate conntrack information into nft trace infrastructure,
from Florian Westphal.
7) A series of 13 patches to allow to specify wildcard netdevice in
netdev basechain and flowtables, eg.
table netdev filter {
chain ingress {
type filter hook ingress devices = { eth0, eth1, vlan* } priority 0; policy accept;
}
}
This also allows for runtime hook registration on NETDEV_{UN}REGISTER
event, from Phil Sutter.
netfilter pull request 25-05-23
* tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: (26 commits)
selftests: netfilter: Torture nftables netdev hooks
netfilter: nf_tables: Add notifications for hook changes
netfilter: nf_tables: Support wildcard netdev hook specs
netfilter: nf_tables: Sort labels in nft_netdev_hook_alloc()
netfilter: nf_tables: Handle NETDEV_CHANGENAME events
netfilter: nf_tables: Wrap netdev notifiers
netfilter: nf_tables: Respect NETDEV_REGISTER events
netfilter: nf_tables: Prepare for handling NETDEV_REGISTER events
netfilter: nf_tables: Have a list of nf_hook_ops in nft_hook
netfilter: nf_tables: Pass nf_hook_ops to nft_unregister_flowtable_hook()
netfilter: nf_tables: Introduce nft_register_flowtable_ops()
netfilter: nf_tables: Introduce nft_hook_find_ops{,_rcu}()
netfilter: nf_tables: Introduce functions freeing nft_hook objects
netfilter: nf_tables: add packets conntrack state to debug trace info
netfilter: conntrack: make nf_conntrack_id callable without a module dependency
netfilter: nf_dup_netdev: Move the recursion counter struct netdev_xmit
netfilter: nft_inner: Use nested-BH locking for nft_pcpu_tun_ctx
netfilter: nf_dup{4, 6}: Move duplication check to task_struct
netfilter: nft_tunnel: fix geneve_opt dump
selftests: netfilter: nft_fib.sh: add type and oif tests with and without VRFs
...
====================
Link: https://patch.msgid.link/20250523132712.458507-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-05-22
this is a pull request of 22 patches for net-next/main.
The series by Biju Das contains 19 patches and adds RZ/G3E CANFD
support to the rcar_canfd driver.
The patch by Vincent Mailhol adds a struct data_bittiming_params to
group FD parameters as a preparation patch for CAN-XL support.
Felix Maurer's patch imports tst-filter from can-tests into the kernel
self tests and Vincent Mailhol adds support for physical CAN
interfaces.
linux-can-next-for-6.16-20250522
* tag 'linux-can-next-for-6.16-20250522' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits)
selftests: can: test_raw_filter.sh: add support of physical interfaces
selftests: can: Import tst-filter from can-tests
can: dev: add struct data_bittiming_params to group FD parameters
can: rcar_canfd: Add RZ/G3E support
can: rcar_canfd: Enhance multi_channel_irqs handling
can: rcar_canfd: Add external_clk variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add sh variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add struct rcanfd_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add shared_can_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add ch_interface_mode variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add {nom,data}_bittiming variables to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_cftml variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_aflpn variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add rnc_field_width variable to struct rcar_canfd_hw_info
can: rcar_canfd: Update RCANFD_GAFLCFG macro
can: rcar_canfd: Add rcar_canfd_setrnc()
can: rcar_canfd: Drop the mask operation in RCANFD_GAFLCFG_SETRNC macro
can: rcar_canfd: Update RCANFD_GERFL_ERR macro
can: rcar_canfd: Drop RCANFD_GAFLCFG_GETRNC macro
can: rcar_canfd: Use of_get_available_child_by_name()
...
====================
Link: https://patch.msgid.link/20250522084128.501049-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use prime 3 for length to make offset slowly drift away.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Acked-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new -z argument to specify max IOV size. By default, use
single large IOV.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a ruleset which binds to various interface names via netdev-family
chains and flowtables and massage the notifiers by frequently renaming
interfaces to match these names. While doing so:
- Keep an 'nft monitor' running in background to receive the notifications
- Loop over 'nft list ruleset' to exercise ruleset dump codepath
- Have iperf running so the involved chains/flowtables see traffic
If supported, also test interface wildcard support separately by
creating a flowtable with 'wild*' interface spec and quickly add/remove
matching dummy interfaces.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Replace the existing VRF test with a more comprehensive one.
It tests following combinations:
- fib type (returns address type, e.g. unicast)
- fib oif (route output interface index
- both with and without 'iif' keyword (changes result, e.g.
'fib daddr type local' will be true when the destination address
is configured on the local machine, but
'fib daddr . iif type local' will only be true when the destination
address is configured on the incoming interface.
Add all types of addresses to test with for both ipv4 and ipv6:
- local address on the incoming interface
- local address on another interface
- local address on another interface thats part of a vrf
- address on another host
The ruleset stores obtained results from 'fib' in nftables sets and
then queries the sets to check that it has the expected results.
Perform one pass while packets are coming in on interface NOT part of
a VRF and then again when it was added and make sure fib returns the
expected routes and address types for the various addresses in the
setup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
scm_rights.c has various patterns of tests to exercise GC.
Let's add cases where SO_PASSRIGHTS is disabled.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As long as recvmsg() or recvmmsg() is used with cmsg, it is not
possible to avoid receiving file descriptors via SCM_RIGHTS.
This behaviour has occasionally been flagged as problematic, as
it can be (ab)used to trigger DoS during close(), for example, by
passing a FUSE-controlled fd or a hung NFS fd.
For instance, as noted on the uAPI Group page [0], an untrusted peer
could send a file descriptor pointing to a hung NFS mount and then
close it. Once the receiver calls recvmsg() with msg_control, the
descriptor is automatically installed, and then the responsibility
for the final close() now falls on the receiver, which may result
in blocking the process for a long time.
Regarding this, systemd calls cmsg_close_all() [1] after each
recvmsg() to close() unwanted file descriptors sent via SCM_RIGHTS.
However, this cannot work around the issue at all, because the final
fput() may still occur on the receiver's side once sendmsg() with
SCM_RIGHTS succeeds. Also, even filtering by LSM at recvmsg() does
not work for the same reason.
Thus, we need a better way to refuse SCM_RIGHTS at sendmsg().
Let's introduce SO_PASSRIGHTS to disable SCM_RIGHTS.
Note that this option is enabled by default for backward
compatibility.
Link: https://uapi-group.org/kernel-features/#disabling-reception-of-scm_rights-for-af_unix-sockets #[0]
Link: https://github.com/systemd/systemd/blob/v257.5/src/basic/fd-util.c#L612-L628 #[1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sk->sk_txrehash is only used for TCP.
Let's restrict SO_TXREHASH to TCP to reflect this.
Later, we will make sk_txrehash a part of the union for other
protocol families.
Note that we need to modify BPF selftest not to get/set
SO_TEREHASH for non-TCP sockets.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939a5 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It was located in conntrack_vrf.sh because that already had the VRF bits.
Lets not add to this and move it to nft_fib.sh where this belongs.
No functional changes for the subtest intended.
The subtest is limited, it only covered 'fib oif'
(route output interface query) when the incoming interface is part
of a VRF.
Next we can extend it to cover 'fib type' for VRFs and also check fib
results when there is an unrelated VRF in same netns.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
fib can either lookup the interface id/name of the output interface that
would be used for the given address, or it can check for the type of the
address according to the fib, e.g. local, unicast, multicast and so on.
This can be used to e.g. make a locally configured address only reachable
through its interface.
Example: given eth0:10.1.1.1 and eth1:10.1.2.1 then 'fib daddr type' for
10.1.1.1 arriving on eth1 will be 'local', but 'fib daddr . iif type' is
expected to return 'unicast', whereas 'fib daddr' and 'fib daddr . iif'
are expected to indicate 'local' if such a packet arrives on eth0.
So far nft_fib.sh only covered oif/oifname, not type.
Repeat tests both with default and a policy (ip rule) based setup.
Also try to run all remaining tests even if a subtest has failed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
representation
Pipapo supports a more compact '4 bit group' format that is chosen when
the memory needed for the default exceeds a threshold (2mb).
Add coverage for those code paths, the existing tests use small sets that
are handled by the default representation.
This comes with a test script run-time increase, but I think its ok:
normal: 2m35s -> 3m9s
debug: 3m24s -> 5m29s (with KSFT_MACHINE_SLOW=yes).
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This test reproduces a scenario where HFSC queue length and backlog accounting
can become inconsistent when a peek operation triggers a dequeue and possible
drop before the parent qdisc updates its counters. The test sets up a DRR root
qdisc with an HFSC class, netem, and blackhole children, and uses Scapy to
inject a packet. It helps to verify that HFSC correctly tracks qlen and backlog
even when packets are dropped during peek-induced dequeue.
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-3-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a very simple TC dump sample with decoding of fq_codel attrs:
# ./tools/net/ynl/samples/tc
dummy0: fq_codel limit: 10240p target: 5ms new_flow_cnt: 0
proving that selector passing (for stats) works.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-13-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are ready to support most of TC. Enable C code gen.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TC uses all possible sub-message formats:
- nested attrs
- fixed headers + nested attrs
- fixed headers
- empty
Nested attrs are already supported for rt-link. Add support
for remaining 3. The empty and fixed headers ones are fairly
trivial, we can fake a Binary or Flags type instead of a Nest.
For fixed headers + nest we need to teach nest parsing and
nest put to handle fixed headers.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The _multi_parse() helper calls the _attr_get() method of each attr,
but it only respects what code the helper wants to emit, not what
local variables it needs. Local variables will soon be needed,
support them.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RenderInfo describes a request-response exchange. Struct describes
a parsed attribute set. For ease of parsing sub-messages with
fixed headers move fixed header info from RenderInfo to Struct.
No functional changes.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rtnetlink all submessages had the selector at the same level
of nesting as the submessage. We could refer to the relevant
attribute from the current struct. In TC, stats are one level
of nesting deeper than "kind". Teach the code-gen about structs
which need to be passed a selector by the caller for parsing.
Because structs are "topologically sorted" one pass of propagating
the selectors down is enough.
For generating netlink message we depend on the presence bits
so no selector passing needed there.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kory is reporting build issues after recent additions to YNL
if the system headers are old.
Link: https://lore.kernel.org/20250519164949.597d6e92@kmaincent-XPS-13-7390
Reported-by: Kory Maincent <kory.maincent@bootlin.com>
Fixes: 0939a418b3b0 ("tools: ynl: submsg: reverse parse / error reporting")
Tested-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250520161916.413298-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow the user to specify a physical interface through the $CANIF
environment variable. Add a $BITRATE environment variable set with a
default value of 500000.
If $CANIF is omitted or if it starts with vcan (e.g. vcan1), the test
will use the virtual can interface type. Otherwise, it will assume
that the provided interface is a physical can interface.
For example:
CANIF=can1 BITRATE=1000000 ./test_raw_filter.sh
will run set the can1 interface with a bitrate of one million and run
the tests on it.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Tests for the can subsystem have been in the can-tests repository[1] so
far. Start moving the tests to kernel selftests by importing the current
tst-filter test. The test is now named test_raw_filter and is substantially
updated to be more aligned with the kernel selftests, follow the coding
style, and simplify the validation of received CAN frames. We also include
documentation of the test design. The test verifies that the single filters
on raw CAN sockets work as expected.
We intend to import more tests from can-tests and add additional test cases
in the future. The goal of moving the CAN selftests into the tree is to
align the tests more closely with the kernel, improve testing of CAN in
general, and to simplify running the tests automatically in the various
kernel CI systems.
[1]: https://github.com/linux-can/can-tests
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/87d289f333cba7bbcc9d69173ea1c320e4b5c3b8.1747833283.git.fmaurer@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fix "withouth" to "without"
Fix "instaces" to "instances"
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250517032535.1176351-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517020003.1159640-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cover three recent cases:
1. missing ops locking for the lowers during netdev_sync_lower_features
2. missing locking for dev_set_promiscuity (plus netdev_ops_assert_locked
with a comment on why/when it's needed)
3. rcu lock during team_change_rx_flags
Verified that each one triggers when the respective fix is reverted.
Not sure about the placement, but since it all relies on teaming,
added to the teaming directory.
One ugly bit is that I add NETIF_F_LRO to netdevsim; there is no way
to trigger netdev_sync_lower_features without it.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250516232205.539266-1-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516225156.1122058-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Antonio Quartulli says:
====================
ovpn: pull request for net-next: ovpn 2025-05-15
this is a new version of the previous pull request.
These time I have removed the fixes that we are still discussing,
so that we don't hold the entire series back.
There is a new fix though: it's about properly checking the return value
of skb_to_sgvec_nomark(). I spotted the issue while testing pings larger
than the iface's MTU on a TCP VPN connection.
I have added various Closes and Link tags where applicable, so
that we have references to GitHub tickets and other public discussions.
Since I have resent the PR, I have also added Andrew's Reviewed-by to
the first patch.
Please pull or let me know if something should be changed!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Patchset highlights:
- update MAINTAINERS entry for ovpn
- extend selftest with more cases
- avoid crash in selftest in case of getaddrinfo() failure
- fix ndo_start_xmit return value on error
- set ignore_df flag for IPv6 packets
- drop useless reg_state check in keepalive worker
- retain skb's dst when entering xmit function
- fix check on skb_to_sgvec_nomark() return value
|
|
In the sigpipe test, we expect send() to fail, but we do not check if
send() fails with the errno we expect (EPIPE).
Add this check and repeat the send() in case of EINTR as we do in other
tests.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-4-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the other peer calls shutdown(SHUT_RD), there is a chance that
the send() call could occur before the message carrying the close
information arrives over the transport. In such cases, the send()
might still succeed. To avoid this race, let's retry the send() call
a few times, ensuring the test is more reliable.
Sleep a little before trying again to avoid flooding the other peer
and filling its receive buffer, causing false-negative.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-3-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The timeout API uses signals, so we have documented not to use sleep(),
but we can use nanosleep(2) since POSIX.1 explicitly specifies that it
does not interact with signals.
Let's provide timeout_usleep() for that.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-2-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a fairly complete example of rt-link usage. If run without any
arguments it simply lists the interfaces and some of their attrs.
If run with an arg it tries to create and delete a netkit device.
1 # ./tools/net/ynl/samples/rt-link 1
2 Trying to create a Netkit interface
3 Testing error message for policy being bad:
4 Kernel error: 'Provided default xmit policy not supported' (bad attribute: .linkinfo.data(netkit).policy)
5 1: lo: mtu 65536
6 2: wlp0s1: mtu 1500
7 3: enp0s13: mtu 1500
8 4: dummy0: mtu 1500 kind dummy altname one two
9 5: nk0: mtu 1500 kind netkit primary 0 policy forward
10 6: nk1: mtu 1500 kind netkit primary 1 policy blackhole
11 Trying to delete a Netkit interface (ifindex 6)
Sample creates the device first, it sets an invalid value for a netkit
attribute to trigger reverse parsing. Line 4 shows the error with the
attribute path correctly generated by YNL.
Then sample fixes the bad attribute and re-issues the request, with
NLM_F_ECHO set. This flag causes the notification to be looped back
to the initiating socket (our socket). Sample parses this notification
to save the ifindex of the created netkit.
Sample then proceeds to list the devices. Line 8 above shows a dummy
device with two alt names. Lines 9 and 10 show the netkit devices
the sample itself created.
The "primary" and "policy" attrs are from inside the netkit submsg.
The string values are auto-generated for the enums by YNL.
To clean up sample deletes the interface it created (line 11).
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from including Classic netlink families one by one to excluding.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reverse parsing lets YNL convert bad and missing attr pointers
from extack into a string like "missing attribute nest1.nest2.attr_name".
It's a feature that's unique to YNL C AFAIU (even the Python YNL
can't do nested reverse parsing). Add support for reverse-parsing
of sub-messages.
To simplify the logic and the code annotate the type policies
with extra metadata. Mark the selectors and the messages with
the information we need. We assume that key / selector always
precedes the sub-message while parsing (and also if there are
multiple sub-messages like in rt-link they are interleaved
selector 1 ... submsg 1 ... selector 2 .. submsg 2, not
selector 1 ... selector 2 ... submsg 1 ... submsg 2).
The rt-link sample in a subsequent changes shows reverse parsing
of sub-messages in action.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust parsing and rendering appropriately to make sub-messages work.
Rendering is pretty trivial, as the submsg -> netlink conversion looks
like rendering a nest in which only one attr was set. Only trick
is that we use the enum value of the sub-message rather than the nest
as the type, and effectively skip one layer of nesting. A real double
nested struct would look like this:
[SELECTOR]
[SUBMSG]
[NEST]
[MSG1-ATTR]
A submsg "is" the nest so by skipping I mean:
[SELECTOR]
[SUBMSG]
[MSG1-ATTR]
There is no extra validation in YNL if caller has set the selector
matching the submsg type (e.g. link type = "macvlan" but the nest
attrs are set to carry "veth"). Let the kernel handle that.
Parsing side is a little more specialized as we need to render and
insert a new kind of function which switches between what to parse
based on the selector. But code isn't too complicated.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The easiest (or perhaps only sane) way to support submessages in C
is to treat them as if they were nests. Build fake attributes to
that effect in the codegen. Render the submsg as a big nest of all
possible values.
With this in place the main missing part is to hook in the switch
which selects how to parse based on the key.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hook in handling of sub-messages, for now treat them as ignored attrs.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare for constructing Struct() instances which represent
sub-messages rather than nested attributes.
Restructure the code / indentation to more easily insert
a case where nested reference comes from annotation other
than the 'nested-attributes' property. Make sure we don't
construct the Struct() object from scratch in multiple
places as the constructor will soon have more arguments.
This should cause no functional change.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're about to add some code here for sub-messages.
Factor out the nest-related logic to make the code readable.
No functional change.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TC needs arrays of nests, but just a put for now.
Fairly straightforward addition.
Link: https://patch.msgid.link/20250513222011.844106-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc7).
Conflicts:
tools/testing/selftests/drivers/net/hw/ncdevmem.c
97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array")
2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX")
https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au
Adjacent changes:
net/core/devmem.c
net/core/devmem.h
0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload")
bd61848900bf ("net: devmem: Implement TX path")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
|
|
To increase code coverage, extend the ovpn selftests with the following
cases:
* connect UDP peers using a mix of IPv6 and IPv4 at the transport layer
* run full test with tunnel MTU equal to transport MTU (exercising
IP layer fragmentation)
* ping "LAN IP" served by VPN peer ("LAN behind a client" test case)
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
getaddrinfo() may fail with error code different from EAI_FAIL
or EAI_NONAME, however in this case we still try to free the
results object, thus leading to a crash.
Fix this by bailing out on any possible error.
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
These tests:
"SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes"
"SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes"
output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)".
They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data
have been received by the other side. However, sometimes there is a delay
in updating this "unsent bytes" counter, and the test fails even though
the counter properly goes to 0 several milliseconds later.
The delay occurs in the kernel because the used buffer notification
callback virtio_vsock_tx_done(), called upon receipt of the data by the
other side, doesn't update the counter itself. It delegates that to
a kernel thread (via vsock->tx_work). Sometimes that thread is delayed
more than the test expects.
Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 18ee44ce97c1 ("test/vsock: add ioctl unsent bytes test")
Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit ce6cb8113c84 ("tools: ynl-gen: individually free previous
values on double set"), specifying the "multi-attr" property raises an
error unless the "nested-attributes" property is specified as well:
File "tools/net/ynl/./pyynl/ynl_gen_c.py", line 1147, in _load_nested_sets
child = self.pure_nested_structs.get(nested)
^^^^^^
UnboundLocalError: cannot access local variable 'nested' where it is not associated with a value
This appears to be a bug since there are existing specs which omit
"nested-attributes" on "multi-attr" attributes. Also, according to
Documentation/userspace-api/netlink/specs.rst, multi-attr "is the
recommended way of implementing arrays (no extra nesting)", suggesting
that nesting should even be avoided in favor of multi-attr.
Fix the indentation of the if-block introduced by the commit to avoid
the error.
Fixes: ce6cb8113c84 ("tools: ynl-gen: individually free previous values on double set")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/d6b58684b7e5bfb628f7313e6893d0097904e1d1.1746940107.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support using a struct pointer for binary attrs. Len field is maintained
because the structs may grow with newer kernel versions. Or, which matters
more, be shorter if the binary is built against newer uAPI than kernel
against which it's executed. Since we are storing a pointer to a struct
type - always allocate at least the amount of memory needed by the struct
per current uAPI headers (unused mem is zeroed). Technically users should
check the length field but per modern ASAN checks storing a short object
under a pointer seems like a bad idea.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250509154213.1747885-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We auto-indent if statements (increase the indent of the subsequent
line by 1), do the same thing for else branches without a block.
There hasn't been any else branches before but we're about to add one.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250509154213.1747885-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Sub-type annotation on binary attributes may indicate that the attribute
carries an array of simple types (also referred to as "C array" in docs).
Support rendering them as such in the C user code. For example for u32,
instead of:
struct {
u32 arr;
} _len;
void *arr;
render:
struct {
u32 arr;
} _count;
__u32 *arr;
Note that count is the number of elements while len was the length in bytes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250509154213.1747885-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for devmem TX in ncdevmem.
This is a combination of the ncdevmem from the devmem TCP series RFCv1
which included the TX path, and work by Stan to include the netlink API
and refactored on top of his generic memory_provider support.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-10-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
