| Age | Commit message (Collapse) | Author |
|---|
|
Cross-merge networking fixes after downstream PR.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
23c93c3b6275 ("bnxt_en: do not map packet buffers twice")
6d1add95536b ("bnxt_en: Modify TX ring indexing logic.")
tools/testing/selftests/net/Makefile
2258b666482d ("selftests: add vlan hw filter tests")
a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and bpf.
Current release - regressions:
- bpf: syzkaller found null ptr deref in unix_bpf proto add
- eth: i40e: fix ST code value for clause 45
Previous releases - regressions:
- core: return error from sk_stream_wait_connect() if sk_wait_event()
fails
- ipv6: revert remove expired routes with a separated list of routes
- wifi rfkill:
- set GPIO direction
- fix crash with WED rx support enabled
- bluetooth:
- fix deadlock in vhci_send_frame
- fix use-after-free in bt_sock_recvmsg
- eth: mlx5e: fix a race in command alloc flow
- eth: ice: fix PF with enabled XDP going no-carrier after reset
- eth: bnxt_en: do not map packet buffers twice
Previous releases - always broken:
- core:
- check vlan filter feature in vlan_vids_add_by_dev() and
vlan_vids_del_by_dev()
- check dev->gso_max_size in gso_features_check()
- mptcp: fix inconsistent state on fastopen race
- phy: skip LED triggers on PHYs on SFP modules
- eth: mlx5e:
- fix double free of encap_header
- fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()"
* tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: check dev->gso_max_size in gso_features_check()
kselftest: rtnetlink.sh: use grep_fail when expecting the cmd fail
net/ipv6: Revert remove expired routes with a separated list of routes
net: avoid build bug in skb extension length calculation
net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean()
net: stmmac: fix incorrect flag check in timestamp interrupt
selftests: add vlan hw filter tests
net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
net: hns3: add new maintainer for the HNS3 ethernet driver
net: mana: select PAGE_POOL
net: ks8851: Fix TX stall caused by TX buffer overrun
ice: Fix PF with enabled XDP going no-carrier after reset
ice: alter feature support check for SRIOV and LAG
ice: stop trashing VF VSI aggregator node ID information
mailmap: add entries for Geliang Tang
mptcp: fill in missing MODULE_DESCRIPTION()
mptcp: fix inconsistent state on fastopen race
selftests: mptcp: join: fix subflow_send_ack lookup
net: phy: skip LED triggers on PHYs on SFP modules
bpf: Add missing BPF_LINK_TYPE invocations
...
|
|
Using page order for deciding what the size of the ring buffer sub buffers
are is exposing a bit too much of the implementation. Although the sub
buffers are only allocated in orders of pages, allow the user to specify
the minimum size of each sub-buffer via kilobytes like they can with the
buffer size itself.
If the user specifies 3 via:
echo 3 > buffer_subbuf_size_kb
Then the sub-buffer size will round up to 4kb (on a 4kb page size system).
If they specify:
echo 6 > buffer_subbuf_size_kb
The sub-buffer size will become 8kb.
and so on.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185631.809766769@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a self test that will write into the trace buffer with differ trace
sub buffer order sizes.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185631.520496304@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When mapping a file on overlayfs, the file stored in ->vm_file is a
backing file whose f_inode is on the underlying filesystem. We need to
verify that /proc/pid/maps contains numbers of the overlayfs file, but
not its backing file.
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://lore.kernel.org/r/20231214064439.1023011-2-avagin@google.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-12-21
Hi David, hi Jakub, hi Paolo, hi Eric,
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 5 day(s) which contain
a total of 4 files changed, 45 insertions(+).
The main changes are:
1) Fix a syzkaller splat which triggered an oob issue in bpf_link_show_fdinfo(),
from Jiri Olsa.
2) Fix another syzkaller-found issue which triggered a NULL pointer dereference
in BPF sockmap for unconnected unix sockets, from John Fastabend.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add missing BPF_LINK_TYPE invocations
bpf: sockmap, test for unconnected af_unix sock
bpf: syzkaller found null ptr deref in unix_bpf proto add
====================
Link: https://lore.kernel.org/r/20231221104844.1374-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a spelling mistake of the EACCES error name, fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231215112456.13554-1-colin.i.king@gmail.com
|
|
An issue occurred while reading an ELF file in libbpf.c during fuzzing:
Program received signal SIGSEGV, Segmentation fault.
0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
4206 in libbpf.c
(gdb) bt
#0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
#1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706
#2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437
#3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497
#4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16
#5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one ()
#6 0x000000000087ad92 in tracing::span::Span::in_scope ()
#7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir ()
#8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} ()
#9 0x00000000005f2601 in main ()
(gdb)
scn_data was null at this code(tools/lib/bpf/src/libbpf.c):
if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) {
The scn_data is derived from the code above:
scn = elf_sec_by_idx(obj, sec_idx);
scn_data = elf_sec_data(obj, scn);
relo_sec_name = elf_sec_str(obj, shdr->sh_name);
sec_name = elf_sec_name(obj, scn);
if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL
return -EINVAL;
In certain special scenarios, such as reading a malformed ELF file,
it is possible that scn_data may be a null pointer
Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com>
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Changye Wu <wuchangye@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com
|
|
clang can generate (with -g -Wa,--compress-debug-sections) 4-byte
aligned DWARF sections that declare themselves to be 8-byte aligned in
the section header. Since DWARF sections are dropped during linking
anyway, just skip running the sanity checks on them.
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/bpf/ZXcFRJVKbKxtEL5t@nz.home/
Link: https://lore.kernel.org/bpf/20231219110324.8989-1-hi@alyssa.is
|
|
run_cmd_grep_fail should be used when expecting the cmd fail, or the ret
will be set to 1, and the total test return 1 when exiting. This would cause
the result report to fail if run via run_kselftest.sh.
Before fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
1
After fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
0
Fixes: 9c2a19f71515 ("kselftest: rtnetlink.sh: add verbose flag")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231219065737.1725120-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test for reproducing the update_schemes_tried_{regions,bytes}
command-causing indefinite hang bug that fixed by commit 7d6fa31a2fd7
("mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions"),
to avoid mistakenly re-introducing the bug. Refer to the fix commit for
more details of the bug.
Link: https://lkml.kernel.org/r/20231212194810.54457-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a selftest for verifying the accuracy of DAMON's access monitoring
functionality. The test starts a program of artificial access pattern,
monitor the access pattern using DAMON, and check if DAMON finds expected
amount of hot data region (working set size) with only acceptable error
rate.
Note that the acceptable error rate is set with only naive assumptions and
small number of tests. Hence failures of the test may not always mean
DAMON is broken. Rather than that, those could be a signal to better
understand the real accuracy level of DAMON in wider environments. Based
on further finding, we could optimize DAMON or adjust the expectation of
the test.
Link: https://lkml.kernel.org/r/20231212194810.54457-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implement update_schemes_tried_bytes command of DAMON sysfs interface in
_damon_sysfs.py. It is not only making the update, but also read the
updated value from the sysfs interface and store it in the Kdamond python
objects so that the user of the module can easily get the value.
Link: https://lkml.kernel.org/r/20231212194810.54457-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend the tests-writing-purpose DAMON sysfs control module to support the
kdamonds start functionality.
Link: https://lkml.kernel.org/r/20231212194810.54457-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: add Python-written DAMON functionality
tests", v2.
DAMON exports most of its functionality via its sysfs interface. Hence
most DAMON functionality tests could be implemented using the interface.
However, because the interfaces require simple but multiple operations for
many controls, writing all such tests from the scratch could be repetitive
and time consuming.
Implement a minimum DAMON sysfs control module, and a couple of DAMON
functionality tests using the control module. The first test is for
ensuring minimum accuracy of data access monitoring, and the second test
is for finding if a previously found and fixed bug is introduced again.
Note that the DAMON sysfs control module is only for avoiding duplicating
code in tests. For convenient and general control of DAMON, users should
use DAMON user-space tools that developed for the purpose, such as
damo[1].
[1] https://github.com/damonitor/damo
Patches Sequence
----------------
This patchset is constructed with five patches. The first three patches
implement a Python-written test implementation-purpose DAMON sysfs control
module. The implementation is incrementally done in the sequence of the
basic data structure (first patch) first, kdamonds start command (second
patch) next, and finally DAMOS tried bytes update command (third patch).
Then two patches for implementing selftests using the module follows. The
fourth patch implements a basic functionality test of DAMON for working
set estimation accuracy. Finally, the fifth patch implements a corner
case test for a previously found bug.
This patch (of 5):
Implement a python module for DAMON sysfs controls. The module is aimed
to be useful for writing DAMON functionality tests in future.
Nonetheless, this module is only representing a subset of DAMON sysfs
files. Following commits will implement more DAMON sysfs controls.
Link: https://lkml.kernel.org/r/20231212194810.54457-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231212194810.54457-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid pointer type value compared with 0 to make code clear.
./tools/testing/radix-tree/maple.c:34142:15-16: WARNING comparing pointer to 0.
Link: https://lkml.kernel.org/r/20231208020450.7003-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7696
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add tests similar to the existing PMD-sized THP tests, but which operate
on memory backed by (PTE-mapped) multi-size THP. This reuses all the
existing infrastructure. If the test suite detects that multi-size THP is
not supported by the kernel, the new tests are skipped.
Link: https://lkml.kernel.org/r/20231207161211.2374093-11-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
do_run_with_thp() prepares (PMD-sized) THP memory into different states
before running tests. With the introduction of multi-size THP, we would
like to reuse this logic to also test those smaller THP sizes. So let's
add a thpsize parameter which tells the function what size THP it should
operate on.
A separate commit will utilize this change to add new tests for multi-size
THP, where available.
Link: https://lkml.kernel.org/r/20231207161211.2374093-10-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The `collapse_max_ptes_none` test was previously failing when a THP size
less than PMD-size had enabled="always". The root cause is because the
test faults in 1 page less than the threshold it set for collapsing. But
when THP is enabled always, we "over allocate" and therefore the threshold
is passed, and collapse unexpectedly succeeds.
Solve this by enlightening khugepaged selftest. Add a command line option
to pass in the desired THP size that should be used for all anonymous
allocations. The harness will then explicitly configure a THP size as
requested and modify the `collapse_max_ptes_none` test so that it faults
in the threshold minus the number of pages in the configured THP size. If
no command line option is provided, default to order 0, as per previous
behaviour.
I chose to use an order in the command line interface, since this makes
the interface agnostic of base page size, making it easier to invoke from
run_vmtests.sh.
Link: https://lkml.kernel.org/r/20231207161211.2374093-9-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Save and restore the new per-size hugepage enabled setting, if available
on the running kernel.
Since the number of per-size directories is not fixed, solve this as
simply as possible by catering for a maximum number in the thp_settings
struct (20). Each array index is the order. The value of THP_NEVER is
changed to 0 so that all of these new settings default to THP_NEVER and
the user only needs to fill in the ones they want to enable.
Link: https://lkml.kernel.org/r/20231207161211.2374093-8-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The khugepaged test has a useful framework for save/restore/pop/push of
all thp settings via the sysfs interface. This will be useful to
explicitly control multi-size THP settings in other tests, so let's move
it out of khugepaged and into its own thp_settings.[c|h] utility.
Link: https://lkml.kernel.org/r/20231207161211.2374093-7-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Previously, the saved thp settings would be restored upon a signal or at
the natural end of the test suite. But there are some tests that directly
call exit() upon failure. In this case, the thp settings were not being
restored, which could then influence other tests.
Fix this by installing an atexit() handler to do the actual restore. The
signal handler can now just call exit() and the atexit handler is invoked.
Link: https://lkml.kernel.org/r/20231207161211.2374093-6-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
The "locked-in-memory size" limit per process can be non-multiple of
page_size. The mmap() fails if we try to allocate locked-in-memory with
same size as the allowed limit if it isn't multiple of the page_size
because mmap() rounds off the memory size to be allocated to next multiple
of page_size.
Fix this by flooring the length to be allocated with mmap() to the
previous multiple of the page_size.
This was getting triggered on KernelCI regularly because of different
ulimit settings which wasn't multiple of the page_size. Find logs
here: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
The bug in was present from the time test was first added.
Link: https://lkml.kernel.org/r/20231214101931.1155586-1-usama.anjum@collabora.com
Fixes: 76fe17ef588a ("secretmem: test: add basic selftest for memfd_secret(2)")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Closes: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_preallocate() defaults to requesting 1 node for preallocation and then
,depending on the type of store, will update the request variable. There
isn't a check for a slot store type, so slot stores are preallocating the
default 1 node. Slot stores do not require any additional nodes, so add a
check for the slot store case that will bypass node_count_gfp(). Update
the tests to reflect that slot stores do not require allocations.
User visible effects of this bug include increased memory usage from the
unneeded node that was allocated.
Link: https://lkml.kernel.org/r/20231213205058.386589-1-sidhartha.kumar@oracle.com
Fixes: 0b8bb544b1a7 ("maple_tree: update mas_preallocate() testing")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
bpf_mem_alloc() doesn't support zero-sized allocation, so removing these
tests from test_bpf_ma test. After the removal, there will no definition
for bin_data_8, so remove 8 from data_sizes array and adjust the index
of data_btf_ids array in all test cases accordingly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231216131052.27621-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
./tools/counter/counter_watch_events.c:233:3-4: Unneeded semicolon
./tools/counter/counter_watch_events.c:234:2-3: Unneeded semicolon
./tools/counter/counter_watch_events.c:333:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7782
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20231220005143.84987-1-yang.lee@linux.alibaba.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
|
|
There are two spelling mistakes in the help text. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20231219133015.365943-1-colin.i.king@gmail.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
* tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (83 commits)
iio: adc: ad7091r: Align arguments to function call parenthesis
iio: adc: ad7091r: Set alert bit in config register
iio: adc: ad7091r: Pass iio_dev to event handler
scripts: checkpatch: Add __aligned to the list of attribute notes
iio: chemical: add support for Aosong AGS02MA
dt-bindings: iio: chemical: add aosong,ags02ma
dt-bindings: vendor-prefixes: add aosong
iio: accel: bmi088: update comments and Kconfig
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for ti HDC302x humidity sensors
iio: ABI: document temperature and humidity peak/trough raw attributes
iio: core: introduce trough info element for minimum values
iio: light: driver for Lite-On ltr390
dt-bindings: iio: light: add ltr390
iio: light: isl76682: remove unreachable code
iio: pressure: driver for Honeywell HSC/SSC series
dt-bindings: iio: pressure: add honeywell,hsc030
doc: iio: Document intensity scale as poorly defined
dt-bindings: iio: temperature: add MLX90635 device
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
...
|
|
Add test cases to verify the behavior of the MDB bulk deletion
functionality in the VXLAN driver.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add test cases to verify the behavior of the MDB bulk deletion
functionality in the bridge driver.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is error log when htab-mem benchmark completes. The error log
looks as follows:
$ ./bench htab-mem -d1
Setting up benchmark 'htab-mem'...
Benchmark 'htab-mem' started.
......
(cgroup_helpers.c:353: errno: Device or resource busy) umount cgroup2
Fix it by closing cgrp fd before invoking cleanup_cgroup_environment().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231219135727.2661527-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test validating that freplace'ing another main (entry) BPF program
fails if the target BPF program doesn't have valid/expected func proto BTF.
We extend fexit_bpf2bpf test to allow to specify expected log message
for negative test cases (where freplace program is expected to fail to
load).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add test cases to validate semantics of global subprog argument
annotations:
- non-null pointers;
- context argument;
- const dynptr passing;
- packet pointers (data, metadata, end).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a set of __arg_xxx macros which can be used to augment BPF global
subprogs/functions with extra information for use by BPF verifier.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove duplicated BTF parsing logic when it comes to subprog call check.
Instead, use (potentially cached) results of btf_prepare_func_args() to
abstract away expectations of each subprog argument in generic terms
(e.g., "this is pointer to context", or "this is a pointer to memory of
size X"), and then use those simple high-level argument type
expectations to validate actual register states to check if they match
expectations.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Instead of btf_check_subprog_arg_match(), use btf_prepare_func_args()
logic to validate "trustworthiness" of main BPF program's BTF information,
if it is present.
We ignored results of original BTF check anyway, often times producing
confusing and ominously-sounding "reg type unsupported for arg#0
function" message, which has no apparent effect on program correctness
and verification process.
All the -EFAULT returning sanity checks are already performed in
check_btf_info_early(), so there is zero reason to have this duplication
of logic between btf_check_subprog_call() and btf_check_subprog_arg_match().
Dropping btf_check_subprog_arg_match() simplifies
btf_check_func_arg_match() further removing `bool processing_call` flag.
One subtle bit that was done by btf_check_subprog_arg_match() was
potentially marking main program's BTF as unreliable. We do this
explicitly now with a dedicated simple check, preserving the original
behavior, but now based on well factored btf_prepare_func_args() logic.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add testcase for the logic that the verifier tracks the BPF_JNE for regs.
The assembly function "reg_not_equal_const()" and "reg_equal_const" that
we add is exactly converted from the following case:
u32 a = bpf_get_prandom_u32();
u64 b = 0;
a %= 8;
/* the "a > 0" here will be optimized to "a != 0" */
if (a > 0) {
/* now the range of a should be [1, 7] */
bpf_skb_store_bytes(skb, 0, &b, a, 0);
}
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231219134800.1550388-5-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The edge range checking for the registers is supported by the verifier
now, so we can activate the extended logic in
tools/testing/selftests/bpf/prog_tests/reg_bounds.c/range_cond() to test
such logic.
Besides, I added some cases to the "crafted_cases" array for this logic.
These cases are mainly used to test the edge of the src reg and dst reg.
All reg bounds testings has passed in the SLOW_TESTS mode:
$ export SLOW_TESTS=1 && ./test_progs -t reg_bounds -j
Summary: 65/18959832 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231219134800.1550388-4-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The "S32_MIN" is already defined with s32 casting, so there is no need
to do it again.
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231219134800.1550388-3-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test for proper driver behavior when the touch confidence bit is set
or cleared. Test the three flavors of touch confidence loss (tipswitch
cleared before confidence, tipswitch and confidence cleared at the same
time, and tipswitch only cleared when touch is actually removed). Also
test two flavors of touch confidence gain (confidence added to a touch
that was "never" confident, and confidence added to a touch that was
previously confident).
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch includes the following revert (one conflicting BPF FS
patch and three token patch sets, represented by merge commits):
- revert 0f5d5454c723 "Merge branch 'bpf-fs-mount-options-parsing-follow-ups'";
- revert 750e785796bb "bpf: Support uid and gid when mounting bpffs";
- revert 733763285acf "Merge branch 'bpf-token-support-in-libbpf-s-bpf-object'";
- revert c35919dcce28 "Merge branch 'bpf-token-and-bpf-fs-based-delegation'".
Link: https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Add a test that writes longs strings, some over the size of the sub buffer
and make sure that the entire content is there.
Link: https://lore.kernel.org/linux-trace-kernel/20231213111527.6a4c9b58@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add one basic vlan hw filter test.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The vec-syscfg selftest verifies that setting the VL of the currently
tested vector type does not disrupt the VL of the other vector type. To do
this it records the current vector length for each type but neglects to
guard this with a check for that vector type actually being supported. Add
one, using a helper function which we also update all the other instances
of this pattern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231218-kselftest-arm64-vec-syscfg-rdvl-v1-1-0ac22d47e81f@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is safe to always start with imprecise SCALAR_VALUE register.
Previously __mark_reg_const_zero() relied on caller to reset precise
mark, but it's very error prone and we already missed it in a few
places. So instead make __mark_reg_const_zero() reset precision always,
as it's a safe default for SCALAR_VALUE. Explanation is basically the
same as for why we are resetting (or rather not setting) precision in
current state. If necessary, precision propagation will set it to
precise correctly.
As such, also remove a big comment about forward precision propagation
in mark_reg_stack_read() and avoid unnecessarily setting precision to
true after reading from STACK_ZERO stack. Again, precision propagation
will correctly handle this, if that SCALAR_VALUE register will ever be
needed to be precise.
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231218173601.53047-1-andrii@kernel.org
|
|
The output from ynl-gen-rst.py has extra indentation that causes extra
<blockquote> elements to be generated in the HTML output.
Reduce the indentation so that sphinx doesn't generate unnecessary
<blockquote> elements.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-14-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The generated .rst for attribute-sets currently uses a sub-sub-heading
for each attribute, with the attribute name in bold. This makes
attributes stand out more than the attribute-set sub-headings they are
part of.
Remove the bold markup from attribute sub-sub-headings.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-13-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The index of netlink specs was being generated unsorted. Sort the output
before generating the index entries.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-12-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
