summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-10-20objtool: Fix return thunk patching in retpolinesJosh Poimboeuf
With CONFIG_RETHUNK enabled, the compiler replaces every RET with a tail call to a return thunk ('JMP __x86_return_thunk'). Objtool annotates all such return sites so they can be patched during boot by apply_returns(). The implementation of __x86_return_thunk() is just a bare RET. It's only meant to be used temporarily until apply_returns() patches all return sites with either a JMP to another return thunk or an actual RET. Removing the .text..__x86.return_thunk section would break objtool's detection of return sites in retpolines. Since retpolines and return thunks would land in the same section, the compiler no longer uses relocations for the intra-section jumps between the retpolines and the return thunk, causing objtool to overlook them. As a result, none of the retpolines' return sites would get patched. Each one stays at 'JMP __x86_return_thunk', effectively a bare RET. Fix it by teaching objtool to detect when a non-relocated jump target is a return thunk (or retpoline). [ bp: Massage the commit message now that the offending commit removing the .text..__x86.return_thunk section has been zapped. Still keep the objtool change here as it makes objtool more robust wrt handling such intra-TU jumps without relocations, should some toolchain and/or config generate them in the future. ] Reported-by: David Kaplan <david.kaplan@amd.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20231012024737.eg5phclogp67ik6x@treble
2023-10-20netlink: specs: add support for auto-sized scalarsJakub Kicinski
Support uint / sint types in specs and YNL. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-20tools: ynl-gen: make the mnl_type() method publicJakub Kicinski
uint/sint support will add more logic to mnl_type(), deduplicate it and make it more accessible. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-19perf data: Increase RLIMIT_NOFILE limit when open too many files in ↵Yang Jihong
perf_data__create_dir() If using parallel threads to collect data, perf record needs at least 6 fds per CPU. (one for sys_perf_event_open, four for pipe msg and ack of the pipe, see record__thread_data_open_pipes(), and one for open perf.data.XXX) For an environment with more than 100 cores, if perf record uses both `-a` and `--threads` options, it is easy to exceed the upper limit of the file descriptor number, when we run out of them try to increase the limits. Before: $ ulimit -n 1024 $ lscpu | grep 'On-line CPU(s)' On-line CPU(s) list: 0-159 $ perf record --threads -a sleep 1 Failed to create data directory: Too many open files After: $ ulimit -n 1024 $ lscpu | grep 'On-line CPU(s)' On-line CPU(s) list: 0-159 $ perf record --threads -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.394 MB perf.data (1576 samples) ] Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231013075945.698874-1-yangjihong1@huawei.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-19perf vendor events: Update PMC used in PM_RUN_INST_CMPL event for power10 ↵Kajol Jain
platform The CPI_STALL_RATIO metric group can be used to present the high level CPI stall breakdown metrics in powerpc, which will show: - DISPATCH_STALL_CPI ( Dispatch stall cycles per insn ) - ISSUE_STALL_CPI ( Issue stall cycles per insn ) - EXECUTION_STALL_CPI ( Execution stall cycles per insn ) - COMPLETION_STALL_CPI ( Completion stall cycles per insn ) Commit cf26e043c2a9 ("perf vendor events power10: Add JSON metric events to present CPI stall cycles in powerpc)" which added the CPI_STALL_RATIO metric group, also modified the PMC value used in PM_RUN_INST_CMPL event from PMC4 to PMC5, to avoid multiplexing of events. But that got revert in recent changes. Fix this issue by changing back the PMC value used in PM_RUN_INST_CMPL to PMC5. Result with the fix: ./perf stat --metric-no-group -M CPI_STALL_RATIO <workload> Performance counter stats for 'workload': 68,745,426 PM_CMPL_STALL # 0.21 COMPLETION_STALL_CPI 7,692,827 PM_ISSUE_STALL # 0.02 ISSUE_STALL_CPI 322,638,223 PM_RUN_INST_CMPL # 0.05 DISPATCH_STALL_CPI # 0.48 EXECUTION_STALL_CPI 16,858,553 PM_DISP_STALL_CYC 153,880,133 PM_EXEC_STALL 0.089774592 seconds time elapsed "--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled in all group for more accuracy. Fixes: 7d473f475b2a ("perf vendor events: Move JSON/events to appropriate files for power10 platform") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel<disgoel@linux.ibm.com> Cc: maddy@linux.ibm.com Link: https://lore.kernel.org/r/20231016143110.244255-1-kjain@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-19perf trace: Use the right bpf_probe_read(_str) variant for reading user dataThomas Richter
Perf test case 111 Check open filename arg using perf trace + vfs_getname fails on s390. This is caused by a failing function bpf_probe_read() in file util/bpf_skel/augmented_raw_syscalls.bpf.c. The root cause is the lookup by address. Function bpf_probe_read() is used. This function works only for architectures with ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE. On s390 is not possible to determine from the address to which address space the address belongs to (user or kernel space). Replace bpf_probe_read() by bpf_probe_read_kernel() and bpf_probe_read_str() by bpf_probe_read_user_str() to explicity specify the address space the address refers to. Output before: # ./perf trace -eopen,openat -- touch /tmp/111 libbpf: prog 'sys_enter': BPF program load failed: Invalid argument libbpf: prog 'sys_enter': -- BEGIN PROG LOAD LOG -- reg type unsupported for arg#0 function sys_enter#75 0: R1=ctx(off=0,imm=0) R10=fp0 ; int sys_enter(struct syscall_enter_args *args) 0: (bf) r6 = r1 ; R1=ctx(off=0,imm=0) R6_w=ctx(off=0,imm=0) ; return bpf_get_current_pid_tgid(); 1: (85) call bpf_get_current_pid_tgid#14 ; R0_w=scalar() 2: (63) *(u32 *)(r10 -8) = r0 ; R0_w=scalar() R10=fp0 fp-8=????mmmm 3: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 ; ..... lines deleted here ..... 23: (bf) r3 = r6 ; R3_w=ctx(off=0,imm=0) R6=ctx(off=0,imm=0) 24: (85) call bpf_probe_read#4 unknown func bpf_probe_read#4 processed 23 insns (limit 1000000) max_states_per_insn 0 \ total_states 2 peak_states 2 mark_read 2 -- END PROG LOAD LOG -- libbpf: prog 'sys_enter': failed to load: -22 libbpf: failed to load object 'augmented_raw_syscalls_bpf' libbpf: failed to load BPF skeleton 'augmented_raw_syscalls_bpf': -22 .... Output after: # ./perf test -Fv 111 111: Check open filename arg using perf trace + vfs_getname : --- start --- 1.085 ( 0.011 ms): touch/320753 openat(dfd: CWD, filename: \ "/tmp/temporary_file.SWH85", \ flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3 ---- end ---- Check open filename arg using perf trace + vfs_getname: Ok # Test with the sleep command shows: Output before: # ./perf trace -e *sleep sleep 1.234567890 0.000 (1234.681 ms): sleep/63114 clock_nanosleep(rqtp: \ { .tv_sec: 0, .tv_nsec: 0 }, rmtp: 0x3ffe0979720) = 0 # Output after: # ./perf trace -e *sleep sleep 1.234567890 0.000 (1234.686 ms): sleep/64277 clock_nanosleep(rqtp: \ { .tv_sec: 1, .tv_nsec: 234567890 }, rmtp: 0x3fff3df9ea0) = 0 # Fixes: 14e4b9f4289a ("perf trace: Raw augmented syscalls fix libbpf 1.0+ compatibility") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Co-developed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: gor@linux.ibm.com Cc: hca@linux.ibm.com Cc: sumanthk@linux.ibm.com Cc: svens@linux.ibm.com Link: https://lore.kernel.org/r/20231019082642.3286650-1-tmricht@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-19tools build: Fix llvm feature detection, still used by bpftoolArnaldo Carvalho de Melo
When removing the BPF event for perf a feature test that checks if the llvm devel files are availabe was removed but that is also used by bpftool. bpftool uses it to decide what kind of disassembly it will use: llvm or binutils based. Removing the tools/build/feature/test-llvm.cpp file made bpftool to always fallback to binutils disassembly, even with the llvm devel files installed, fix it by restoring just that small test-llvm.cpp test file. Fixes: 56b11a2126bf2f42 ("perf bpf: Remove support for embedding clang for compiling BPF events (-e foo.c)") Reported-by: Manu Bretelle <chantr4@gmail.com> Reviewed-by: Ian Rogers <irogers@google.com> Reviewed-by: Manu Bretelle <chantr4@gmail.com> Acked-by: Quentin Monnet <quentin@isovalent.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Carsten Haitzler <carsten.haitzler@arm.com> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: Fangrui Song <maskray@google.com> Cc: He Kuang <hekuang@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Rob Herring <robh@kernel.org> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Wang ShaoBo <bobo.shaobowang@huawei.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Yonghong Song <yhs@fb.com> Cc: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/lkml/ZTGa0Ukt7QyxWcVy@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-10-19selftests/bpf: Add tests for open-coded task and css iterChuyi Zhou
This patch adds 4 subtests to demonstrate these patterns and validating correctness. subtest1: 1) We use task_iter to iterate all process in the system and search for the current process with a given pid. 2) We create some threads in current process context, and use BPF_TASK_ITER_PROC_THREADS to iterate all threads of current process. As expected, we would find all the threads of current process. 3) We create some threads and use BPF_TASK_ITER_ALL_THREADS to iterate all threads in the system. As expected, we would find all the threads which was created. subtest2: We create a cgroup and add the current task to the cgroup. In the BPF program, we would use bpf_for_each(css_task, task, css) to iterate all tasks under the cgroup. As expected, we would find the current process. subtest3: 1) We create a cgroup tree. In the BPF program, we use bpf_for_each(css, pos, root, XXX) to iterate all descendant under the root with pre and post order. As expected, we would find all descendant and the last iterating cgroup in post-order is root cgroup, the first iterating cgroup in pre-order is root cgroup. 2) We wse BPF_CGROUP_ITER_ANCESTORS_UP to traverse the cgroup tree starting from leaf and root separately, and record the height. The diff of the hights would be the total tree-high - 1. subtest4: Add some failure testcase when using css_task, task and css iters, e.g, unlock when using task-iters to iterate tasks. Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Link: https://lore.kernel.org/r/20231018061746.111364-9-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-19selftests/bpf: rename bpf_iter_task.c to bpf_iter_tasks.cChuyi Zhou
The newly-added struct bpf_iter_task has a name collision with a selftest for the seq_file task iter's bpf skel, so the selftests/bpf/progs file is renamed in order to avoid the collision. Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231018061746.111364-8-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-19bpf: Introduce css open-coded iterator kfuncsChuyi Zhou
This Patch adds kfuncs bpf_iter_css_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_css in open-coded iterator style. These kfuncs actually wrapps css_next_descendant_{pre, post}. css_iter can be used to: 1) iterating a sepcific cgroup tree with pre/post/up order 2) iterating cgroup_subsystem in BPF Prog, like for_each_mem_cgroup_tree/cpuset_for_each_descendant_pre in kernel. The API design is consistent with cgroup_iter. bpf_iter_css_new accepts parameters defining iteration order and starting css. Here we also reuse BPF_CGROUP_ITER_DESCENDANTS_PRE, BPF_CGROUP_ITER_DESCENDANTS_POST, BPF_CGROUP_ITER_ANCESTORS_UP enums. Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20231018061746.111364-5-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-19bpf: Introduce task open coded iterator kfuncsChuyi Zhou
This patch adds kfuncs bpf_iter_task_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_task in open-coded iterator style. BPF programs can use these kfuncs or through bpf_for_each macro to iterate all processes in the system. The API design keep consistent with SEC("iter/task"). bpf_iter_task_new() accepts a specific task and iterating type which allows: 1. iterating all process in the system (BPF_TASK_ITER_ALL_PROCS) 2. iterating all threads in the system (BPF_TASK_ITER_ALL_THREADS) 3. iterating all threads of a specific task (BPF_TASK_ITER_PROC_THREADS) Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Link: https://lore.kernel.org/r/20231018061746.111364-4-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-19bpf: Introduce css_task open-coded iterator kfuncsChuyi Zhou
This patch adds kfuncs bpf_iter_css_task_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_css_task in open-coded iterator style. These kfuncs actually wrapps css_task_iter_{start,next, end}. BPF programs can use these kfuncs through bpf_for_each macro for iteration of all tasks under a css. css_task_iter_*() would try to get the global spin-lock *css_set_lock*, so the bpf side has to be careful in where it allows to use this iter. Currently we only allow it in bpf_lsm and bpf iter-s. Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20231018061746.111364-3-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-19tools: ynl-gen: support limit namesJakub Kicinski
Support the use of symbolic names like s8-min or u32-max in checks to make writing specs less painful. Link: https://lore.kernel.org/r/20231018163917.2514503-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19tools: ynl-gen: support full range of min/max checks for integer valuesJakub Kicinski
Extend the support to full range of min/max checks. None of the existing YNL families required complex integer validation. The support is less than trivial, because we try to keep struct nla_policy tiny the min/max members it holds in place are s16. Meaning we can only express checks in range of s16. For larger ranges we need to define a structure and link it in the policy. Link: https://lore.kernel.org/r/20231018163917.2514503-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19tools: ynl-gen: track attribute useJakub Kicinski
For range validation we'll need to know if any individual attribute is used on input (i.e. whether we will generate a policy for it). Track this information. Link: https://lore.kernel.org/r/20231018163917.2514503-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19selftests/bpf/sockopt: Add io_uring supportBreno Leitao
Expand the sockopt test to use also check for io_uring {g,s}etsockopt commands operations. This patch starts by marking each test if they support io_uring support or not. Right now, io_uring cmd getsockopt() has a limitation of only accepting level == SOL_SOCKET, otherwise it returns -EOPNOTSUPP. Since there aren't any test exercising getsockopt(level == SOL_SOCKET), this patch changes two tests to use level == SOL_SOCKET, they are "getsockopt: support smaller ctx->optlen" and "getsockopt: read ctx->optlen". There is no limitation for the setsockopt() part. Later, each test runs using regular {g,s}etsockopt systemcalls, and, if liburing is supported, execute the same test (again), but calling liburing {g,s}setsockopt commands. This patch also changes the level of two tests to use SOL_SOCKET for the following two tests. This is going to help to exercise the io_uring subsystem: * getsockopt: read ctx->optlen * getsockopt: support smaller ctx->optlen Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20231016134750.1381153-12-leitao@debian.org Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-19selftests/net: Extract uring helpers to be reusableBreno Leitao
Instead of defining basic io_uring functions in the test case, move them to a common directory, so, other tests can use them. This simplify the test code and reuse the common liburing infrastructure. This is basically a copy of what we have in io_uring_zerocopy_tx with some minor improvements to make checkpatch happy. A follow-up test will use the same helpers in a BPF sockopt test. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20231016134750.1381153-8-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-19tools headers: Grab copy of io_uring.hBreno Leitao
This file will be used by mini_uring.h and allow tests to run without the need of installing liburing to run the tests. This is needed to run io_uring tests in BPF, such as (tools/testing/selftests/bpf/prog_tests/sockopt.c). Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20231016134750.1381153-7-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. net/mac80211/key.c 02e0e426a2fb ("wifi: mac80211: fix error path key leak") 2a8b665e6bcc ("wifi: mac80211: remove key_mtx") 7d6904bf26b9 ("Merge wireless into wireless-next") https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/ti/Kconfig a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object") 98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19Merge tag 'net-6.6-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, netfilter, WiFi. Feels like an up-tick in regression fixes, mostly for older releases. The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as fairly clear-cut user reported regressions. The mlx5 DMA bug was causing strife for 390x folks. The fixes themselves are not particularly scary, tho. No open investigations / outstanding reports at the time of writing. Current release - regressions: - eth: mlx5: perform DMA operations in the right locations, make devices usable on s390x, again - sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve, previous fix of rejecting invalid config broke some scripts - rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock - revert "ethtool: Fix mod state of verbose no_mask bitset", needs more work Current release - new code bugs: - tcp: fix listen() warning with v4-mapped-v6 address Previous releases - regressions: - tcp: allow tcp_disconnect() again when threads are waiting, it was denied to plug a constant source of bugs but turns out .NET depends on it - eth: mlx5: fix double-free if buffer refill fails under OOM - revert "net: wwan: iosm: enable runtime pm support for 7560", it's causing regressions and the WWAN team at Intel disappeared - tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb, fix single-stream perf regression on some devices Previous releases - always broken: - Bluetooth: - fix issues in legacy BR/EDR PIN code pairing - correctly bounds check and pad HCI_MON_NEW_INDEX name - netfilter: - more fixes / follow ups for the large "commit protocol" rework, which went in as a fix to 6.5 - fix null-derefs on netlink attrs which user may not pass in - tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless Debian for keeping HZ=250 alive) - net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent letting frankenstein UDP super-frames from getting into the stack - net: fix interface altnames when ifc moves to a new namespace - eth: qed: fix the size of the RX buffers - mptcp: avoid sending RST when closing the initial subflow" * tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits) Revert "ethtool: Fix mod state of verbose no_mask bitset" selftests: mptcp: join: no RST when rm subflow/addr mptcp: avoid sending RST when closing the initial subflow mptcp: more conservative check for zero probes tcp: check mptcp-level constraints for backlog coalescing selftests: mptcp: join: correctly check for no RST net: ti: icssg-prueth: Fix r30 CMDs bitmasks selftests: net: add very basic test for netdev names and namespaces net: move altnames together with the netdevice net: avoid UAF on deleted altname net: check for altname conflicts when changing netdev's netns net: fix ifname in netlink ntf during netns move net: ethernet: ti: Fix mixed module-builtin object net: phy: bcm7xxx: Add missing 16nm EPHY statistics ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr tcp_bpf: properly release resources on error paths net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve net: mdio-mux: fix C45 access returning -EIO after API change tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb octeon_ep: update BQL sent bytes before ringing doorbell ...
2023-10-19objtool: Add bcachefs noreturnsKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-10-19Merge tag 'seccomp-v6.6-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fix from Kees Cook: - Fix seccomp_unotify perf benchmark for 32-bit (Jiri Slaby) * tag 'seccomp-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: perf/benchmark: fix seccomp_unotify benchmark for 32-bit
2023-10-19selftests: mptcp: join: no RST when rm subflow/addrMatthieu Baerts
Recently, we noticed that some RST were wrongly generated when removing the initial subflow. This patch makes sure RST are not sent when removing any subflows or any addresses. Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19selftests: mptcp: join: correctly check for no RSTMatthieu Baerts
The commit mentioned below was more tolerant with the number of RST seen during a test because in some uncontrollable situations, multiple RST can be generated. But it was not taking into account the case where no RST are expected: this validation was then no longer reporting issues for the 0 RST case because it is not possible to have less than 0 RST in the counter. This patch fixes the issue by adding a specific condition. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19bpftool: Wrap struct_ops dump in an arrayManu Bretelle
When dumping a struct_ops, 2 dictionaries are emitted. When using `name`, they were already wrapped in an array, but not when using `id`. Causing `jq` to fail at parsing the payload as it reached the comma following the first dict. This change wraps those dictionaries in an array so valid json is emitted. Before, jq fails to parse the output: ``` $ sudo bpftool struct_ops dump id 1523612 | jq . > /dev/null parse error: Expected value before ',' at line 19, column 2 ``` After, no error parsing the output: ``` sudo ./bpftool struct_ops dump id 1523612 | jq . > /dev/null ``` Signed-off-by: Manu Bretelle <chantr4@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20231018230133.1593152-3-chantr4@gmail.com
2023-10-19bpftool: Fix printing of pointer valueManu Bretelle
When printing a pointer value, "%p" will either print the hexadecimal value of the pointer (e.g `0x1234`), or `(nil)` when NULL. Both of those are invalid json "integer" values and need to be wrapped in quotes. Before: ``` $ sudo bpftool struct_ops dump name ned_dummy_cca | grep next "next": (nil), $ sudo bpftool struct_ops dump name ned_dummy_cca | \ jq '.[1].bpf_struct_ops_tcp_congestion_ops.data.list.next' parse error: Invalid numeric literal at line 29, column 34 ``` After: ``` $ sudo ./bpftool struct_ops dump name ned_dummy_cca | grep next "next": "(nil)", $ sudo ./bpftool struct_ops dump name ned_dummy_cca | \ jq '.[1].bpf_struct_ops_tcp_congestion_ops.data.list.next' "(nil)" ``` Signed-off-by: Manu Bretelle <chantr4@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20231018230133.1593152-2-chantr4@gmail.com
2023-10-19selftests: net: add very basic test for netdev names and namespacesJakub Kicinski
Add selftest for fixes around naming netdevs and namespaces. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-19inet: lock the socket in ip_sock_set_tos()Eric Dumazet
Christoph Paasch reported a panic in TCP stack [1] Indeed, we should not call sk_dst_reset() without holding the socket lock, as __sk_dst_get() callers do not all rely on bare RCU. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 12bad6067 P4D 12bad6067 PUD 12bad5067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 2750 Comm: syz-executor.5 Not tainted 6.6.0-rc4-g7a5720a344e7 #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:tcp_get_metrics+0x118/0x8f0 net/ipv4/tcp_metrics.c:321 Code: c7 44 24 70 02 00 8b 03 89 44 24 48 c7 44 24 4c 00 00 00 00 66 c7 44 24 58 02 00 66 ba 02 00 b1 01 89 4c 24 04 4c 89 7c 24 10 <49> 8b 0f 48 8b 89 50 05 00 00 48 89 4c 24 30 33 81 00 02 00 00 69 RSP: 0018:ffffc90000af79b8 EFLAGS: 00010293 RAX: 000000000100007f RBX: ffff88812ae8f500 RCX: ffff88812b5f8f01 RDX: 0000000000000002 RSI: ffffffff8300f080 RDI: 0000000000000002 RBP: 0000000000000002 R08: 0000000000000003 R09: ffffffff8205eca0 R10: 0000000000000002 R11: ffff88812b5f8f00 R12: ffff88812a9e0580 R13: 0000000000000000 R14: ffff88812ae8fbd2 R15: 0000000000000000 FS: 00007f70a006b640(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000012bad7003 CR4: 0000000000170ee0 Call Trace: <TASK> tcp_fastopen_cache_get+0x32/0x140 net/ipv4/tcp_metrics.c:567 tcp_fastopen_cookie_check+0x28/0x180 net/ipv4/tcp_fastopen.c:419 tcp_connect+0x9c8/0x12a0 net/ipv4/tcp_output.c:3839 tcp_v4_connect+0x645/0x6e0 net/ipv4/tcp_ipv4.c:323 __inet_stream_connect+0x120/0x590 net/ipv4/af_inet.c:676 tcp_sendmsg_fastopen+0x2d6/0x3a0 net/ipv4/tcp.c:1021 tcp_sendmsg_locked+0x1957/0x1b00 net/ipv4/tcp.c:1073 tcp_sendmsg+0x30/0x50 net/ipv4/tcp.c:1336 __sock_sendmsg+0x83/0xd0 net/socket.c:730 __sys_sendto+0x20a/0x2a0 net/socket.c:2194 __do_sys_sendto net/socket.c:2206 [inline] Fixes: e08d0b3d1723 ("inet: implement lockless IP_TOS") Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231018090014.345158-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-18selftests: tc-testing: move auxiliary scripts to a dedicated folderPedro Tammela
Some taprio tests need auxiliary scripts to wait for workqueue events to process. Move them to a dedicated folder in order to package them for the kselftests tarball. Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20231017152309.3196320-3-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-18selftests: tc-testing: add missing Kconfig options to 'config'Pedro Tammela
Make sure CI builds using just tc-testing/config can run all tdc tests. Some tests were broken because of missing knobs. Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20231017152309.3196320-2-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-18perf/benchmark: fix seccomp_unotify benchmark for 32-bitJiri Slaby (SUSE)
Commit 7d5cb68af638 (perf/benchmark: add a new benchmark for seccom_unotify) added a reference to __NR_seccomp into perf. This is fine as it added also a definition of __NR_seccomp for 64-bit. But it failed to do so for 32-bit as instead of ifndef, ifdef was used. Fix this typo (so fix the build of perf on 32-bit). Fixes: 7d5cb68af638 (perf/benchmark: add a new benchmark for seccom_unotify) Cc: Andrei Vagin <avagin@google.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20231017083019.31733-1-jirislaby@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2023-10-18KVM: arm64: selftests: Test for setting ID register from usersapceJing Zhang
Add tests to verify setting ID registers from userspace is handled correctly by KVM. Also add a test case to use ioctl KVM_ARM_GET_REG_WRITABLE_MASKS to get writable masks. Signed-off-by: Jing Zhang <jingzhangos@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231011195740.3349631-6-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-10-18tools headers arm64: Update sysreg.h with kernel sourcesJing Zhang
The users of sysreg.h (perf, KVM selftests) are now generating the necessary sysreg-defs.h; sync sysreg.h with the kernel sources and fix the KVM selftests that use macros which suffered a rename. Signed-off-by: Jing Zhang <jingzhangos@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231011195740.3349631-5-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-10-18KVM: selftests: Generate sysreg-defs.h and add to include pathOliver Upton
Start generating sysreg-defs.h for arm64 builds in anticipation of updating sysreg.h to a version that depends on it. Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231011195740.3349631-4-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-10-18perf build: Generate arm64's sysreg-defs.h and add to include pathOliver Upton
Start generating sysreg-defs.h in anticipation of updating sysreg.h to a version that needs the generated output. Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231011195740.3349631-3-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-10-18tools: arm64: Add a Makefile for generating sysreg-defs.hOliver Upton
Use a common Makefile for generating sysreg-defs.h, which will soon be needed by perf and KVM selftests. The naming scheme of the generated macros is not expected to change, so just refer to the canonical script/data in the kernel source rather than copying to tools. Co-developed-by: Jing Zhang <jingzhangos@google.com> Signed-off-by: Jing Zhang <jingzhangos@google.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231011195740.3349631-2-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-10-18perf tools: Do not ignore the default vmlinux.hNamhyung Kim
The recent change made it possible to generate vmlinux.h from BTF and to ignore the file. But we also have a minimal vmlinux.h that will be used by default. It should not be ignored by GIT. Fixes: b7a2d774c9c5 ("perf build: Add ability to build with a generated vmlinux.h") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310110451.rvdUZJEY-lkp@intel.com/ Cc: oe-kbuild-all@lists.linux.dev Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-18tools/build: Fix -s detection code in tools/scripts/Makefile.includeJiri Olsa
As Dmitry described in [1] changelog the current way of detecting -s option is broken for new make. Changing the tools/build -s option detection the same way as it was fixed for root Makefile in [1]. [1] 4bf73588165b ("kbuild: Port silent mode detection to future gnu make.") Cc: Dmitry Goncharov <dgoncharov@users.sf.net> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: KP Singh <kpsingh@chromium.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Hao Luo <haoluo@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Stanislav Fomichev <sdf@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: bpf@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Link: https://lore.kernel.org/r/20231008212251.236023-3-jolsa@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-18tools/build: Fix -s detection code in tools/build/Makefile.buildJiri Olsa
As Dmitry described in [1] changelog the current way of detecting -s option is broken for new make. Changing the tools/build -s option detection the same way as it was fixed for root Makefile in [1]. [1] 4bf73588165b ("kbuild: Port silent mode detection to future gnu make.") Cc: Dmitry Goncharov <dgoncharov@users.sf.net> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: KP Singh <kpsingh@chromium.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Hao Luo <haoluo@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Stanislav Fomichev <sdf@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: bpf@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Link: https://lore.kernel.org/r/20231008212251.236023-2-jolsa@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-18proc: test /proc/${pid}/statmSwarup Laxman Kotiaklapudi
My original comment lied, output can be "0 A A B 0 0 0\n" (see comment in the code). I don't quite understand why get_mm_counter(mm, MM_FILEPAGES) + get_mm_counter(mm, MM_SHMEMPAGES) can stay positive but get_mm_counter(mm, MM_ANONPAGES) is always 0 after everything is unmapped but that's just me. [adobriyan@gmail.com: more or less rewritten] Link: https://lkml.kernel.org/r/0721ca69-7bb4-40aa-8d01-0c5f91e5f363@p183 Signed-off-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18compiler.h: move __is_constexpr() to compiler.hDavid Laight
Prior to f747e6667ebb2 __is_constexpr() was in its only user minmax.h. That commit moved it to const.h - but that file just defines ULL(x) and UL(x) so that constants can be defined for .S and .c files. So apart from the word 'const' it wasn't really a good location. Instead move the definition to compiler.h just before the similar is_signed_type() and is_unsigned_type(). This may not be a good long-term home, but the three definitions belong together. Link: https://lkml.kernel.org/r/2a6680bbe2e84459816a113730426782@AcuMS.aculab.com Signed-off-by: David Laight <david.laight@aculab.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18tools/mm: update the usage output to be more organizedAudra Mitchell
Organize the usage options alphabetically and improve the description of some options. Also separate the more complicated cull options from the single use compare options. Link: https://lkml.kernel.org/r/20231013190350.579407-6-audra@redhat.com Signed-off-by: Audra Mitchell <audra@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Georgi Djakov <djakov@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18tools/mm: fix the default case for page_owner_sortAudra Mitchell
With the additional commands and timestamps added to the tool, the default case (-t) has been broken. Now that the allocation timestamps are saved outside of the txt field, allow us to properly sort the data by number of times the record has been seen. Furthermore prevent the misuse of the commandline arguments so only one compare option can be used. Link: https://lkml.kernel.org/r/20231013190350.579407-5-audra@redhat.com Signed-off-by: Audra Mitchell <audra@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Georgi Djakov <djakov@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18tools/mm: filter out timestamps for correct collationAudra Mitchell
With the introduction of allocation timestamps being included in page_owner output, each record becomes unique due to the timestamp nanosecond granularity. Remove the check in add_list that tries to collate each record during processing as the memcmp() is just additional overhead at this point. Also keep the allocation timestamps, but allow collation to occur without consideration of the allocation timestamp except in the case were allocation timestamps are requested by the user (the -a option). Link: https://lkml.kernel.org/r/20231013190350.579407-4-audra@redhat.com Signed-off-by: Audra Mitchell <audra@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Georgi Djakov <djakov@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18tools/mm: remove references to free_ts from page_owner_sortAudra Mitchell
With the removal of free timestamps from page_owner output, we no longer need to handle this case or the "unreleased" case. Remove all references to both cases. Link: https://lkml.kernel.org/r/20231013190350.579407-3-audra@redhat.com Signed-off-by: Audra Mitchell <audra@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Georgi Djakov <djakov@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18selftests: add a selftest to verify hugetlb usage in memcgNhat Pham
This patch add a new kselftest to demonstrate and verify the new hugetlb memcg accounting behavior. Link: https://lkml.kernel.org/r/20231006184629.155543-5-nphamcs@gmail.com Signed-off-by: Nhat Pham <nphamcs@gmail.com> Cc: Frank van der Linden <fvdl@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tejun heo <tj@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18selftests/mm: add a new test for madv and hugetlbBreno Leitao
Create a selftest that exercises the race between page faults and madvise(MADV_DONTNEED) in the same huge page. Do it by running two threads that touches the huge page and madvise(MADV_DONTNEED) at the same time. In case of a SIGBUS coming at pagefault, the test should fail, since we hit the bug. The test doesn't have a signal handler, and if it fails, it fails like the following ---------------------------------- running ./hugetlb_fault_after_madv ---------------------------------- ./run_vmtests.sh: line 186: 595563 Bus error (core dumped) "$@" [FAIL] This selftest goes together with the fix of the bug[1] itself. [1] https://lore.kernel.org/all/20231001005659.2185316-1-riel@surriel.com/#r Link: https://lkml.kernel.org/r/20231005163922.87568-3-leitao@debian.org Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Rik van Riel <riel@surriel.com> Tested-by: Rik van Riel <riel@surriel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18selftests/mm: export get_free_hugepages()Breno Leitao
Patch series "New selftest for mm", v2. This is a simple test case that reproduces an mm problem[1], where a page fault races with madvise(), and it is not trivial to reproduce and debug. This test-case aims to avoid such race problems from happening again, impacting workloads that leverages external allocators, such as tcmalloc, jemalloc, etc. [1] https://lore.kernel.org/all/20231001005659.2185316-1-riel@surriel.com/#r This patch (of 2): get_free_hugepages() is helpful for other hugepage tests. Export it to the common file (vm_util.c) to be reused. Link: https://lkml.kernel.org/r/20231005163922.87568-1-leitao@debian.org Link: https://lkml.kernel.org/r/20231005163922.87568-2-leitao@debian.org Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Rik van Riel <riel@surriel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18radix tree test suite: fix allocation calculation in kmem_cache_alloc_bulk()Liam R. Howlett
The bulk allocation is iterating through an array and storing enough memory for the entire bulk allocation instead of a single array entry. Only allocate an array element of the size set in the kmem_cache. Link: https://lkml.kernel.org/r/20230929201359.2857583-1-Liam.Howlett@oracle.com Fixes: cc86e0c2f306 ("radix tree test suite: add support for slab bulk APIs") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18selftests: mm: add pagemap ioctl testsMuhammad Usama Anjum
Add pagemap ioctl tests. Add several different types of tests to judge the correction of the interface. Link: https://lkml.kernel.org/r/20230821141518.870589-7-usama.anjum@collabora.com Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrei Vagin <avagin@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Miroslaw <emmir@google.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Paul Gofman <pgofman@codeweavers.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yun Zhou <yun.zhou@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 13:57:47 +0000