| Age | Commit message (Collapse) | Author |
|---|
|
Make the sink error message more similar to the event error message that
reminds about missing kernel support. The available sinks are also
determined by the hardware so mention that too.
Also, usually it's not necessary to specify the sink, so add that as a
hint.
Now the error for a made up sink looks like this:
$ perf record -e cs_etm/@abc/
Couldn't find sink "abc" on event cs_etm/@abc/.
Missing kernel or device support?
Hint: An appropriate sink will be picked automatically if one isn't is specified.
For any error other than ENOENT, the same message as before is
displayed.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/ec7502e6-b406-3997-c2a5-24f98e5c4854@arm.com
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230124110220.460551-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update ptrace tests according to all potential Yama security policies.
This is required to make such tests pass even if Yama is enabled.
Tests are not skipped but they now check both Landlock and Yama boundary
restrictions at run time to keep a maximum test coverage (i.e. positive
and negative testing).
Signed-off-by: Jeff Xu <jeffxu@google.com>
Link: https://lore.kernel.org/r/20230114020306.1407195-2-jeffxu@google.com
Cc: stable@vger.kernel.org
[mic: Add curly braces around EXPECT_EQ() to make it build, and improve
commit message]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Following line should listen for a rising edge and exit after the first
one since '-c 1' is provided.
# gpio-event-mon -n gpiochip1 -o 0 -r -c 1
It works with kernel 4.19 but it doesn't work with 5.10. In 5.10 the
above command doesn't exit after the first rising edge it keep listening
for an event forever. The '-c 1' is not taken into an account.
The problem is in commit 62757c32d5db ("tools: gpio: add multi-line
monitoring to gpio-event-mon").
Before this commit the iterator 'i' in monitor_device() is used for
counting of the events (loops). In the case of the above command (-c 1)
we should start from 0 and increment 'i' only ones and hit the 'break'
statement and exit the process. But after the above commit counting
doesn't start from 0, it start from 1 when we listen on one line.
It is because 'i' is used from one more purpose, counting of lines
(num_lines) and it isn't restore to 0 after following code
for (i = 0; i < num_lines; i++)
gpiotools_set_bit(&values.mask, i);
Restore the initial value of the iterator to 0 in order to allow counting
of loops to work for any cases.
Fixes: 62757c32d5db ("tools: gpio: add multi-line monitoring to gpio-event-mon")
Signed-off-by: Ivo Borisov Shopov <ivoshopov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[Bartosz: tweak the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Fix the build caused by missing kmsan_handle_dma() and is_power_of_2() that
are used in drivers/virtio/virtio_ring.c.
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Message-Id: <20230110034310.779744-1-mie@igel.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The existing timestamping_enable() is a no-op because it applies
to the socket-related path that we are not verifying here
anymore. (but still leaving the code around hoping we can
have xdp->skb path verified here as well)
poll: 1 (0)
xsk_ring_cons__peek: 1
0xf64788: rx_desc[0]->addr=100000000008000 addr=8100 comp_addr=8000
rx_hash: 3697961069
rx_timestamp: 1674657672142214773 (sec:1674657672.1422)
XDP RX-time: 1674657709561774876 (sec:1674657709.5618) delta sec:37.4196
AF_XDP time: 1674657709561871034 (sec:1674657709.5619) delta
sec:0.0001 (96.158 usec)
0xf64788: complete idx=8 addr=8000
Also, maybe something to archive here, see [0] for Jesper's note
about NIC vs host clock delta.
0: https://lore.kernel.org/bpf/f3a116dc-1b14-3432-ad20-a36179ef0608@redhat.com/
v2:
- Restore original value (Martin)
Fixes: 297a3f124155 ("selftests/bpf: Simple program to dump XDP RX metadata")
Reported-by: Jesper Dangaard Brouer <jbrouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <jbrouer@redhat.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230126225030.510629-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
When rendering code we should walk the ops in the order in which
they are declared in the spec. This is both more intuitive and
prevents code from jumping around when hashing in the dict changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ops_list contains all the operations, but the main iteration use
case is to walk only ops which define attrs. Rename ops_list to
msg_list, because now it looks like the contents are the same,
just the format is different. While at it convert from tuple
to just keys, none of the users care about the name of the op.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lorenzo reports that after switching from enum to flags netdev
family lost ability to render kdoc (and the enum contents got
generally garbled).
Combine the flags and enum handling in uAPI handling.
Reported-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the number of test cases and length of execution grows it's
useful to select only a subset of tests. In TLS for instance we
have a matrix of variants for different crypto protocols and
during development mostly care about testing a handful.
This is quicker and makes reading output easier.
This patch adds argument parsing to kselftest_harness.
It supports a couple of ways to filter things, I could not come
up with one way which will cover all cases.
The first and simplest switch is -r which takes the name of
a test to run (can be specified multiple times). For example:
$ ./my_test -r some.test.name -r some.other.name
will run tests some.test.name and some.other.name (where "some"
is the fixture, "test" and "other" and "name is the test.)
Then there is a handful of group filtering options. f/v/t for
filtering by fixture/variant/test. They have both positive
(match -> run) and negative versions (match -> skip).
If user specifies any positive option we assume the default
is not to run the tests. If only negative options are set
we assume the tests are supposed to be run by default.
Usage: ./tools/testing/selftests/net/tls [-h|-l] [-t|-T|-v|-V|-f|-F|-r name]
-h print help
-l list all tests
-t name include test
-T name exclude test
-v name include variant
-V name exclude variant
-f name include fixture
-F name exclude fixture
-r name run specified test
Test filter options can be specified multiple times. The filtering stops
at the first match. For example to include all tests from variant 'bla'
but not test 'foo' specify '-T foo -v bla'.
Here we can request for example all tests from fixture "foo" to run:
./my_test -f foo
or to skip variants var1 and var2:
./my_test -V var1 -V var2
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
During the cleanup phase, the server pids were killed with a SIGTERM
directly, not using a SIGUSR1 first to quit safely. As a result, this
test was often ending with two error messages:
read: Connection reset by peer
While at it, use a for-loop to terminate all the PIDs the same way.
Also the different files are now removed after having killed the PIDs
using them. It makes more sense to do that in this order.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before, only '[FAIL]' was printed in case of error during the validation
phase.
Now, in case of failure, the variable name, its value and expected one
are displayed to help understand what was wrong.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of having a long list of conditions to check, it is possible to
give a list of variable names to compare with their 'e_XXX' version.
This will ease the introduction of the following commit which will print
which condition has failed (if any).
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This script is running a few tests after having setup the environment.
Printing titles helps understand what is being tested.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Note that we can't guess the listener family anymore based on the client
target address: always use IPv6.
The fullmesh flag with endpoints from different families is also
validated here.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Exercise IP_LOCAL_PORT_RANGE socket option in various scenarios:
1. pass invalid values to setsockopt
2. pass a range outside of the per-netns port range
3. configure a single-port range
4. exhaust a configured multi-port range
5. check interaction with late-bind (IP_BIND_ADDRESS_NO_PORT)
6. set then get the per-socket port range
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensures that whenever bpf_setsockopt() is called with the SOL_TCP
option on a ktls enabled socket, the call will be accepted by the
system. The provided test makes sure of this by performing an
examination when the server side socket is in the CLOSE_WAIT state. At
this stage, ktls is still enabled on the server socket and can be used
to test if bpf_setsockopt() works correctly with linux.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Link: https://lore.kernel.org/r/20230125201608.908230-3-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
In a set of prior changes, we added the ability for struct_ops programs
to be sleepable. This patch enhances the dummy_st_ops selftest suite to
validate this behavior by adding a new sleepable struct_ops entry to
dummy_st_ops.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125164735.785732-5-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In a prior change, the verifier was updated to support sleepable
BPF_PROG_TYPE_STRUCT_OPS programs. A caller could set the program as
sleepable with bpf_program__set_flags(), but it would be more ergonomic
and more in-line with other sleepable program types if we supported
suffixing a struct_ops section name with .s to indicate that it's
sleepable.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125164735.785732-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF struct_ops programs currently cannot be marked as sleepable. This
need not be the case -- struct_ops programs can be sleepable, and e.g.
invoke kfuncs that export the KF_SLEEPABLE flag. So as to allow future
struct_ops programs to invoke such kfuncs, this patch updates the
verifier to allow struct_ops programs to be sleepable. A follow-on patch
will add support to libbpf for specifying struct_ops.s as a sleepable
struct_ops program, and then another patch will add testcases to the
dummy_st_ops selftest suite which test sleepable struct_ops behavior.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125164735.785732-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As stated in README.rst, in order to resolve errors with linker errors,
'LDLIBS=-static' should be used. Most problems will be solved by this
option, but in the case of urandom_read, this won't fix the problem. So
the Makefile is currently implemented to strip the 'static' option when
compiling the urandom_read. However, stripping this static option isn't
configured properly on $(LDLIBS) correctly, which is now causing errors
on static compilation.
# LDLIBS=-static ./vmtest.sh
ld.lld: error: attempted static link of dynamic object liburandom_read.so
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [Makefile:190: /linux/tools/testing/selftests/bpf/urandom_read] Error 1
make: *** Waiting for unfinished jobs....
This commit fixes this problem by configuring the strip with $(LDLIBS).
Fixes: 68084a136420 ("selftests/bpf: Fix building bpf selftests statically")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230125100440.21734-1-danieltimlee@gmail.com
|
|
HOSTCC is always wanted when building. Setting CC to HOSTCC happens
after tools/scripts/Makefile.include is included, meaning flags are
set assuming say CC is gcc, but then it can be later set to HOSTCC
which may be clang. tools/scripts/Makefile.include is needed for host
set up and common macros in objtool's Makefile. Rather than override
CC to HOSTCC, just pass CC as HOSTCC to Makefile.build, the libsubcmd
builds and the linkage step. This means the Makefiles don't see things
like CC changing and tool flag determination, and similar, work
properly.
Also, clear the passed subdir as otherwise an outer build may break by
inadvertently passing an inappropriate value.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230124064324.672022-2-irogers@google.com
|
|
Previously tools/lib/subcmd was added to the include path, switch to
installing the headers and then including from that directory. This
avoids dependencies on headers internal to tools/lib/subcmd. Add the
missing subcmd directory to the affected #include.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230124064324.672022-1-irogers@google.com
|
|
Revert the portion of a recent Makefile change that incorrectly
deletes source files when doing "make clean".
Fixes: ba2d788aa873 ("selftests: amd-pstate: Trigger tbench benchmark and test cpus")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A recent patch added a new set of kfuncs for allocating, freeing,
manipulating, and querying cpumasks. This patch adds a new 'cpumask'
selftest suite which verifies their behavior.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125143816.721952-5-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that defining trusted fields in a struct is supported, we should add
selftests to verify the behavior. This patch adds a few such testcases.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125143816.721952-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
KF_TRUSTED_ARGS kfuncs currently have a subtle and insidious bug in
validating pointers to scalars. Say that you have a kfunc like the
following, which takes an array as the first argument:
bool bpf_cpumask_empty(const struct cpumask *cpumask)
{
return cpumask_empty(cpumask);
}
...
BTF_ID_FLAGS(func, bpf_cpumask_empty, KF_TRUSTED_ARGS)
...
If a BPF program were to invoke the kfunc with a NULL argument, it would
crash the kernel. The reason is that struct cpumask is defined as a
bitmap, which is itself defined as an array, and is accessed as a memory
address by bitmap operations. So when the verifier analyzes the
register, it interprets it as a pointer to a scalar struct, which is an
array of size 8. check_mem_reg() then sees that the register is NULL and
returns 0, and the kfunc crashes when it passes it down to the cpumask
wrappers.
To fix this, this patch adds a check for KF_ARG_PTR_TO_MEM which
verifies that the register doesn't contain a possibly-NULL pointer if
the kfunc is KF_TRUSTED_ARGS.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125143816.721952-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Update the selftests to include a test of passing a stacktrace between the
events of a synthetic event.
Link: https://lkml.kernel.org/r/20230117152236.475439286@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
With the new filter logic of passing in the name of a function to match an
instruction pointer (or the address of the function), add a test to make
sure that it is functional.
This is also the first test to test plain filtering. The filtering has
been tested via the trigger logic, which uses the same code, but there was
nothing to test just the event filter, so this test is the first to add
such a case.
Link: https://lkml.kernel.org/r/20221219183214.075559302@goodmis.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: linux-kselftest@vger.kernel.org
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Today we test if a child socket is cloned properly from a listening socket
inside a sockmap only when there are no BPF programs attached to the map.
A bug has been reported [1] for the case when sockmap has a verdict program
attached. So cover this case as well to prevent regressions.
[1]: https://lore.kernel.org/r/00000000000073b14905ef2e7401@google.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230113-sockmap-fix-v2-4-1e0ee7ac2f90@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Following patch extends the sockmap ops tests to cover the scenario when a
sockmap with attached programs holds listening sockets.
Pass the BPF skeleton to sockmap ops test so that the can access and attach
the BPF programs.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230113-sockmap-fix-v2-3-1e0ee7ac2f90@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When developing tests, it is much faster to use the QEMU Linux
emulator instead of the system emulator, which among other things avoids
kernel-build latencies. Although use of the QEMU Linux emulator does have
its limitations (please see below), it is sufficient to test startup code,
stdlib code, and syscall calling conventions.
However, the current mainline Linux-kernel nolibc setup does not
support this. Therefore, add a "run-user" target that immediately
executes the prebuilt executable.
Again, this approach does have its limitations. For example, the
executable runs with the user's privilege level, which can cause some
false-positive failures due to insufficient permissions. In addition,
if the underlying kernel is old enough to lack some features that
nolibc relies on, the result will be false-positive failures in the
corresponding tests. However, for nolibc changes not affected by these
limittions, the result is a much faster code-compile-test-debug cycle.
With this patch, running a userland test is as simple as issuing:
make ARCH=xxx CROSS_COMPILE=xxx run-user
Signed-off-by: Willy Tarreau <w@1wt.eu>
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Building the kernel with ARCH=x86_64 works fine, but nolibc-test
only supports "x86", which causes errors when reusing existing build
environment. Let's permit this environment to be used as well by making
nolibc also accept ARCH=x86_64.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Add a CLI sample which can take in arbitrary request
in JSON format, convert it to Netlink and do the inverse
for output.
It's meant as a development tool primarily and perhaps
for selftests which need to tickle netlink in a special way.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Code generators to turn Netlink specs into C code.
I'm definitely not proud of it.
The main generator is in Python, there's a bash script
to regen all code-gen'ed files in tree after making
spec changes.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
William reports kernel soft-lockups on some OVS topologies when TC mirred
egress->ingress action is hit by local TCP traffic [1].
The same can also be reproduced with SCTP (thanks Xin for verifying), when
client and server reach themselves through mirred egress to ingress, and
one of the two peers sends a "heartbeat" packet (from within a timer).
Enqueueing to backlog proved to fix this soft lockup; however, as Cong
noticed [2], we should preserve - when possible - the current mirred
behavior that counts as "overlimits" any eventual packet drop subsequent to
the mirred forwarding action [3]. A compromise solution might use the
backlog only when tcf_mirred_act() has a nest level greater than one:
change tcf_mirred_forward() accordingly.
Also, add a kselftest that can reproduce the lockup and verifies TC mirred
ability to account for further packet drops after TC mirred egress->ingress
(when the nest level is 1).
[1] https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/Y0w%2FWWY60gqrtGLp@pop-os.localdomain/
[3] such behavior is not guaranteed: for example, if RPS or skb RX
timestamping is enabled on the mirred target device, the kernel
can defer receiving the skb and return NET_RX_SUCCESS inside
tcf_mirred_forward().
Reported-by: William Zhao <wizhao@redhat.com>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In commit 72653ae5303c ("selftests: net: tcp_mmap:
Use huge pages in send path") I made a change to use hugepages
for the buffer used by the client (tx path)
Today, I understood that the cause for poor zerocopy
performance was that after a mmap() for a 512KB memory
zone, kernel uses a single zeropage, mapped 128 times.
This was really the reason for poor tx path performance
in zero copy mode, because this zero page refcount is
under high pressure, especially when TCP ACK packets
are processed on another cpu.
We need either to force a COW on all the memory range,
or use MAP_POPULATE so that a zero page is not abused.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230120181136.3764521-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each architecture supports at least 6 syscall argument registers, so now
that specs for each architecture is defined in bpf_tracing.h, remove
unnecessary macro overrides, which previously were required to keep
existing BPF_KSYSCALL() uses compiling and working.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-26-andrii@kernel.org
|
|
Turns out splice() is one of the syscalls that's using current maximum
number of arguments (six). This is perfect for testing, so extend
bpf_syscall_macro selftest to also trace splice() syscall, using
BPF_KSYSCALL() macro. This makes sure all the syscall argument register
definitions are correct.
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # s390x
Link: https://lore.kernel.org/bpf/20230120200914.3008030-25-andrii@kernel.org
|
|
Define explicit table of registers used for syscall argument passing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-24-andrii@kernel.org
|
|
Define explicit table of registers used for syscall argument passing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-23-andrii@kernel.org
|
|
Define explicit table of registers used for syscall argument passing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Pu Lehui <pulehui@huawei.com> # RISC-V
Link: https://lore.kernel.org/bpf/20230120200914.3008030-22-andrii@kernel.org
|
|
Define explicit table of registers used for syscall argument passing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-21-andrii@kernel.org
|
|
Define explicit table of registers used for syscall argument passing.
Note that 7th arg is supported on 32-bit powerpc architecture, by not on
powerpc64.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-20-andrii@kernel.org
|
|
Define explicit table of registers used for syscall argument passing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-19-andrii@kernel.org
|
|
Define explicit table of registers used for syscall argument passing.
We need PT_REGS_PARM1_[CORE_]SYSCALL macros overrides, similarly to
s390x, due to orig_x0 not being present in UAPI's pt_regs, so we need to
utilize BPF CO-RE and custom pt_regs___arm64 definition.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Link: https://lore.kernel.org/bpf/20230120200914.3008030-18-andrii@kernel.org
|
|
Define explicit table of registers used for syscall argument passing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-17-andrii@kernel.org
|
|
Define explicit table of registers used for syscall argument passing.
Note that we need custom overrides for PT_REGS_PARM1_[CORE_]SYSCALL
macros due to the need to use BPF CO-RE and custom local pt_regs
definitions to fetch orig_gpr2, storing 1st argument.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # s390x
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-16-andrii@kernel.org
|
|
Define explicit table of registers used for syscall argument passing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-15-andrii@kernel.org
|
|
Define explicit table of registers used for syscall argument passing.
Remove now unnecessary overrides of PT_REGS_PARM5_[CORE_]SYSCALL macros.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-14-andrii@kernel.org
|
|
Set up generic support in bpf_tracing.h for up to 7 syscall arguments
tracing with BPF_KSYSCALL, which seems to be the limit according to
syscall(2) manpage. Also change the way that syscall convention is
specified to be more explicit. Subsequent patches will adjust and define
proper per-architecture syscall conventions.
__PT_PARM1_SYSCALL_REG through __PT_PARM6_SYSCALL_REG is added
temporarily to keep everything working before each architecture has
syscall reg tables defined. They will be removed afterwards.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Link: https://lore.kernel.org/bpf/20230120200914.3008030-13-andrii@kernel.org
|
