| Age | Commit message (Collapse) | Author |
|---|
|
This merges up to commit a0efa2f362a6 ("Merge net-next/main to resolve
conflicts") from wireless-next into the staging-next branch to handle
the removal of a staging driver easier (it happened in the wireless-next
branch). That way we don't have developers confused and start
submitting changes for this driver that is now deleted.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The RED test uses a pair of TBF shapers. The first to get predictably-sized
stream of traffic, and second to get a 100% saturated chokepoint. To this
chokepoint it injects individual packets. Because the chokepoint is
saturated, these additional packets go straight to the backlog. This allows
the test to check RED behavior across various queue sizes.
The shapers are rated at 1Gbps, for historical reasons (before mlxsw
supported TBF offload, the test used port speed to create the chokepoints).
Machines with a low-power CPU may have trouble consistently generating
1Gbps of traffic, and the test then spuriously fails.
Instead, drop the rate to 200Mbps (Spectrum has a guaranteed shaper rate
granularity of 200Mbps, so anything lower is not guaranteed to work well).
Because that means fewer packets will be mirrored in the ECN-mark test,
adjust the passing condition accordingly.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/c6712f9c5de75ae0bc2ab3d8ea7d92aaaf93af95.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test works by injecting into a port with a maxed-out queue a couple
packets and checks if a corresponding number of packets were dropped. This
has worked well on Spectrum<4, but on Spectrum-4 it has been noisy. This
is in line with the observation that on Spectrum-4, queue size tends to
fluctuate more. A handful of packets could then still be accepted to the
queue even though it was nominally full just recently.
In order to accommodate this behavior, send many more packets. The buffer
can fit N extra packets, but not N% packets. This therefore allows us to
set wider absolute margins, while actually narrowing them relatively.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/abc869b9f6003d400d6293ddd5edb2f4517f44d5.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The qdisc stats are taken from the port's periodic HW stats, which are
updated once a second. We try to accommodate the latency by using busywait
in build_backlog().
The issue in that seems to be that when do_mark_test() builds the backlog,
it makes the decision whether to send more packets based on the first
instance of the queue depth stat exceeding the current value, when in fact
more traffic is on the way and the queue depth would increase further. This
leads to failures in TC 1 of mark-mirror test, where we see the following
failure:
TEST: TC 0: marked packets mirror'd [ OK ]
TEST: TC 1: marked packets mirror'd [FAIL]
Spurious packets (1680 -> 2290) observed without buffer pressure
Fix by waiting for the full second before reading the queue depth for the
first time, to make sure it reflects all in-flight traffic.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/321dcf8b3e9a1f0766429c8cf3e3f1746f1bc375.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Backlog fluctuates on Spectrum-4 much more than on <4. In practice we can
sample queue depth values going from about -12% to about +7% of the
configured RED limit. The test which checks the queue size has a limit of
+-10%, and as a result often fails. We attempted to fix the issue by
busywaiting for several seconds hoping to get within the bounds, but that
still proved to be too noisy (or the wait time would be impractically
long). Unfortunately we have to bump the value tolerance from 10% to 15%,
which in this patch do.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/f54950df2a8fcba46c3ddc1053376352fa2e592b.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Backlog fluctuates on Spectrum-4 much more than on <4. Increasing the
desired backlog seems to help, as the constant fluctuations do not overlap
into the territory where packets are marked.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/0821fb3aa8bb6a6c0d3000baab04995517c9a0cc.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We only support a single check at a time for TypeBinary.
Refactor the code to cover 'exact-len' and make adding
new checks easier.
Link: https://lore.kernel.org/20241004063855.1a693dd1@kernel.org
Link: https://patch.msgid.link/20241007155311.1193382-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings, install scripts, run-time error path, and git
status cleanups to tests:
- devices/probe: fix for Python3 regex string syntax warnings
- clone3: removing unused macro from clone3_cap_checkpoint_restore()
- vDSO: fix to align getrandom states to cache line
- core and exec: add missing executables to .gitignore files
- rtc: change to skip test if /dev/rtc0 can't be accessed
- timers/posix: fix warn_unused_result result in __fatal_error()
- breakpoints: fix to detect suspend successful condition correctly
- hid: fix to install required dependencies to run the test"
* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoints: use remaining time to check if suspend succeed
kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
selftest: hid: add missing run-hid-tools-tests.sh
selftests: vDSO: align getrandom states to cache line
selftests: exec: update gitignore for load_address
selftests: core: add unshare_test to gitignore
clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
selftest: rtc: Check if could access /dev/rtc0 before testing
|
|
Some network devices have the ability to offload EDT (Earliest
Departure Time) which is the model used for TCP pacing and FQ
packet scheduler.
Some of them implement the timing wheel mechanism described in
https://saeed.github.io/files/carousel-sigcomm17.pdf
with an associated 'timing wheel horizon'.
This patch adds dev->max_pacing_offload_horizon expressing
this timing wheel horizon in nsec units.
This is a read-only attribute.
Unless a driver sets it, dev->max_pacing_offload_horizon
is zero.
v2: addressed Jakub feedback ( https://lore.kernel.org/netdev/20240930152304.472767-2-edumazet@google.com/T/#mf6294d714c41cc459962154cc2580ce3c9693663 )
v3: added yaml doc (also per Jakub feedback)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241003121219.2396589-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the inclusion of commit c259acab839e ("ptp/ioctl: support
MONOTONIC{,_RAW} timestamps for PTP_SYS_OFFSET_EXTENDED") clock_gettime()
now allows retrieval of pre/post timestamps for CLOCK_MONOTONIC and
CLOCK_MONOTONIC_RAW timebases along with the previously supported
CLOCK_REALTIME.
This patch adds a command line option 'y' to the testptp program to
choose one of the allowed timebases [realtime aka system, monotonic,
and monotonic-raw).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20241003101506.769418-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch re-adds the (updated) ioam selftests with support for the
tunsrc feature.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20241002162731.19847-3-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch entirely removes the ioam selftests to prepare for the next
patch in this series, which re-adds the new ioam selftests for better
readability.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20241002162731.19847-2-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix tp_printk command line option crashing the kernel
With the code that can handle a buffer from a previous boot, the
trace_check_vprintf() needed access to the delta of the address space
used by the old buffer and the current buffer. To do so, the
trace_array (tr) parameter was used. But when tp_printk is enabled on
the kernel command line, no trace buffer is used and the trace event
is sent directly to printk(). That meant the tr field of the iterator
descriptor was NULL, and since tp_printk still uses
trace_check_vprintf() it caused a NULL dereference.
- Add ptrace.h include to x86 ftrace file for completeness
- Fix rtla installation when done with out-of-tree build
- Fix the help messages in rtla that were incorrect
- Several fixes to fix races with the timerlat and hwlat code
Several locking issues were discovered with the coordination between
timerlat kthread creation and hotplug. As timerlat has callbacks from
hotplug code to start kthreads when CPUs come online. There are also
locking issues with grabbing the cpu_read_lock() and the locks within
timerlat.
* tag 'trace-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Fix a race during cpuhp processing
tracing/timerlat: Fix a race during cpuhp processing
tracing/timerlat: Drop interface_lock in stop_kthread()
tracing/timerlat: Fix duplicated kthread creation due to CPU online/offline
x86/ftrace: Include <asm/ptrace.h>
rtla: Fix the help text in osnoise and timerlat top tools
tools/rtla: Fix installation from out-of-tree build
tracing: Fix trace_check_vprintf() when tp_printk is used
|
|
Extend txtimestamp test to run with fixed tskey using
SCM_TS_OPT_ID control message for all types of sockets.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://patch.msgid.link/20241001125716.2832769-4-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
|
|
Rename ip_len to payload_len since the length in this case refers only
to the payload, and not the entire IP packet like for IPv4. While we're
at it, just use the variable directly when calling
recv_verify_packet_udp/tcp.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240930162935.980712-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test runs "devlink reload" explicitly. Instead, it is better to use
devlink_reload() which waits for udev events to be processed. Do not sleep
after reload, as devlink_reload() blocks until all the netdevs are renamed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/844509e3057b65277a7181a23c95b71ec95e8a56.1727706741.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The help text in osnoise top and timerlat top had some minor errors
and omissions. The -d option was missing the 's' (second) abbreviation and
the error message for '-d' used '-D'.
Cc: stable@vger.kernel.org
Fixes: 1eceb2fc2ca54 ("rtla/osnoise: Add osnoise top mode")
Fixes: a828cd18bc4ad ("rtla: Add timerlat tool and timelart top mode")
Link: https://lore.kernel.org/20240813155831.384446-1-ezulian@redhat.com
Suggested-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
rtla now supports out-of-tree builds, but installation fails as it
still tries to install the rtla binary from the source tree. Use the
existing macro $(RTLA) to refer to the binary.
Link: https://lore.kernel.org/ZudubuoU_JHjPZ7w@decadent.org.uk
Fixes: 01474dc706ca ("tools/rtla: Use tools/build makefiles to build rtla")
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts and no adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h
regarding flowtable hooks, from Phil Sutter.
2) Fix nft_audit.sh selftests with newer nft binaries, due to different
(valid) audit output, also from Phil.
3) Disable BH when duplicating packets via nf_dup infrastructure,
otherwise race on nf_skb_duplicated for locally generated traffic.
From Eric.
4) Missing return in callback of selftest C program, from zhang jiao.
netfilter pull request 24-10-02
* tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: Add missing return value
netfilter: nf_tables: prevent nf_skb_duplicated corruption
selftests: netfilter: Fix nft_audit.sh for newer nft binaries
netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED
====================
Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no va_end after va_copy, just add it.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240927040050.7851-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The include.sh file is generated for inclusion and should not be executable.
Otherwise, it will be added to kselftest-list.txt. Additionally, add the
executable bit for test.py at the same time to ensure proper functionality.
Fixes: 3ade6ce1255e ("selftests: rds: add testing infrastructure")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240927041349.81216-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull generic unaligned.h cleanups from Al Viro:
"Get rid of architecture-specific <asm/unaligned.h> includes, replacing
them with a single generic <linux/unaligned.h> header file.
It's the second largest (after asm/io.h) class of asm/* includes, and
all but two architectures actually end up using exact same file.
Massage the remaining two (arc and parisc) to do the same and just
move the thing to from asm-generic/unaligned.h to linux/unaligned.h"
[ This is one of those things that we're better off doing outside the
merge window, and would only cause extra conflict noise if it was in
linux-next for the next release due to all the trivial #include line
updates. Rip off the band-aid. - Linus ]
* tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move asm/unaligned.h to linux/unaligned.h
arc: get rid of private asm/unaligned.h
parisc: get rid of private asm/unaligned.h
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
step_after_suspend_test fails with device busy error while
writing to /sys/power/state to start suspend. The test believes
it failed to enter suspend state with
$ sudo ./step_after_suspend_test
TAP version 13
Bail out! Failed to enter Suspend state
However, in the kernel message, I indeed see the system get
suspended and then wake up later.
[611172.033108] PM: suspend entry (s2idle)
[611172.044940] Filesystems sync: 0.006 seconds
[611172.052254] Freezing user space processes
[611172.059319] Freezing user space processes completed (elapsed 0.001 seconds)
[611172.067920] OOM killer disabled.
[611172.072465] Freezing remaining freezable tasks
[611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[611172.089724] printk: Suspending console(s) (use no_console_suspend to debug)
[611172.117126] serial 00:03: disabled
some other hardware get reconnected
[611203.136277] OOM killer enabled.
[611203.140637] Restarting tasks ...
[611203.141135] usb 1-8.1: USB disconnect, device number 7
[611203.141755] done.
[611203.155268] random: crng reseeded on system resumption
[611203.162059] PM: suspend exit
After investigation, I noticed that for the code block
if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem"))
ksft_exit_fail_msg("Failed to enter Suspend state\n");
The write will return -1 and errno is set to 16 (device busy).
It should be caused by the write function is not successfully returned
before the system suspend and the return value get messed when waking up.
As a result, It may be better to check the time passed of those few
instructions to determine whether the suspend is executed correctly for
it is pretty hard to execute those few lines for 5 seconds.
The timer to wake up the system is set to expire after 5 seconds and
no re-arm. If the timer remaining time is 0 second and 0 nano secomd,
it means the timer expired and wake the system up. Otherwise, the system
could be considered to enter the suspend state failed if there is any
remaining time.
After appling this patch, the test would not fail for it believes the
system does not go to suspend by mistake. It now could continue to the
rest part of the test after suspend.
Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test")
Reported-by: Sinadin Shan <sinadin.shan@oracle.com>
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Insert raw strings to prevent Python3 from interpreting string literals
as Unicode strings and "\d" as invalid escaped sequence.
Fix the warnings:
tools/testing/selftests/devices/probe/test_discoverable_devices.py:48:
SyntaxWarning: invalid escape sequence '\d' usb_controller_sysfs_dir =
"usb[\d]+"
tools/testing/selftests/devices/probe/test_discoverable_devices.py: 94:
SyntaxWarning: invalid escape sequence '\d' re_usb_version =
re.compile("PRODUCT=.*/(\d)/.*")
Fixes: dacf1d7a78bf ("kselftest: Add test to verify probe of devices from discoverable buses")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
|
|
The recent addition of support for testing with the x86 specific quirk
KVM_X86_QUIRK_SLOT_ZAP_ALL disabled in the generic memslot tests broke the
build of the KVM selftests for all other architectures:
In file included from include/kvm_util.h:8,
from include/memstress.h:13,
from memslot_modification_stress_test.c:21:
memslot_modification_stress_test.c: In function ‘main’:
memslot_modification_stress_test.c:176:38: error: ‘KVM_X86_QUIRK_SLOT_ZAP_ALL’ undeclared (first use in this function)
176 | KVM_X86_QUIRK_SLOT_ZAP_ALL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Add __x86_64__ guard defines to avoid building the relevant code on other
architectures.
Fixes: 61de4c34b51c ("KVM: selftests: Test memslot move in memslot_perf_test with quirk disabled")
Fixes: 218f6415004a ("KVM: selftests: Allow slot modification stress test with quirk disabled")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-ID: <20240930-kvm-build-breakage-v1-1-866fad3cc164@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
HID test cases run tests using the run-hid-tools-tests.sh script.
When installed with "make install", the run-hid-tools-tests.sh
script will not be copied over, resulting in the following error message.
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c hid
selftests: hid: hid-core.sh
bash: ./run-hid-tools-tests.sh: No such file or directory
Add the run-hid-tools-tests.sh script to the TEST_FILES in the Makefile
for it to be installed.
Fixes: ffb85d5c9e80 ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This prevents false sharing, which makes a large difference on machines
with several NUMA nodes, such as on a dual socket Intel(R) Xeon(R) Gold
6338 CPU @ 2.00GHz, where the "bench-multi" test goes from 2.7s down to
1.9s. While this is just test code, it also forms the basis of how folks
will wind up implementing this in libraries, so we should implement this
simple cache alignment improvement here.
Suggested-by: Florian Weimer <fweimer@redhat.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- When sched_ext is in bypass mode (e.g. while disabling the BPF
scheduler), it was using one DSQ to implement global FIFO scheduling
as all it has to do is guaranteeing reasonable forward progress.
On multi-socket machines, this can lead to live-lock conditions under
certain workloads. Fixed by splitting the queue used for FIFO
scheduling per NUMA node. This required several preparation patches.
- Hotplug tests on powerpc could reliably trigger deadlock while
enabling a BPF scheduler.
This was caused by cpu_hotplug_lock nesting inside scx_fork_rwsem and
then CPU hotplug path trying to fork a new thread while holding
cpu_hotplug_lock.
Fixed by restructuring locking in enable and disable paths so that
the two locks are not coupled. This required several preparation
patches which also fixed a couple other issues in the enable path.
- A build fix for !CONFIG_SMP
- Userspace tooling sync and updates
* tag 'sched_ext-for-6.12-rc1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove redundant p->nr_cpus_allowed checker
sched_ext: Decouple locks in scx_ops_enable()
sched_ext: Decouple locks in scx_ops_disable_workfn()
sched_ext: Add scx_cgroup_enabled to gate cgroup operations and fix scx_tg_online()
sched_ext: Enable scx_ops_init_task() separately
sched_ext: Fix SCX_TASK_INIT -> SCX_TASK_READY transitions in scx_ops_enable()
sched_ext: Initialize in bypass mode
sched_ext: Remove SCX_OPS_PREPPING
sched_ext: Relocate check_hotplug_seq() call in scx_ops_enable()
sched_ext: Use shorter slice while bypassing
sched_ext: Split the global DSQ per NUMA node
sched_ext: Relocate find_user_dsq()
sched_ext: Allow only user DSQs for scx_bpf_consume(), scx_bpf_dsq_nr_queued() and bpf_iter_scx_dsq_new()
scx_flatcg: Use a user DSQ for fallback instead of SCX_DSQ_GLOBAL
tools/sched_ext: Receive misc updates from SCX repo
sched_ext: Add __COMPAT helpers for features added during v6.12 devel cycle
sched_ext: Build fix for !CONFIG_SMP
|
|
The name of the "load_address" objects has been modified, but the
corresponding entry in the gitignore file must be updated.
Update the load_address entry in the gitignore file to account for
the new names, adding an exception to keep on tracking load_address.c.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This executable is missing from the corresponding gitignore file.
Add unshare_test to the core gitignore list.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The macro MAX_PID_NS_LEVEL is never referenced in the code, so remove it.
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
__fatal_error routine doesn't check strerror_r() return value,
which results in the following compile time warning:
posix_timers.c: In function ‘__fatal_error’:
posix_timers.c:31:9: warning: ignoring return value of ‘strerror_r’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
31 | strerror_r(errno, buf, sizeof(buf));
Fix this by adding a check for return value and error handling appropriate
for the GNU-specific strerror_r() in use in __fatal_error(). Check if
return string is null and handle accordingly.
From Linux strerror_r() manual page:
"The GNU-specific strerror_r() returns a pointer to a string containing
the error message. This may be either a pointer to a string that the
function stores in buf, or a pointer to some (immutable) static string
(in which case buf is unused). If the function stores a string in buf,
then at most buflen bytes are stored (the string may be truncated if
buflen is too small and errnum is unknown). The string always includes
a terminating null byte."
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The rtctest requires the read permission on /dev/rtc0. The rtctest will
be skipped if the /dev/rtc0 is not readable.
Reviewed-by: Koba Ko <kobak@nvidia.com>
Reviewed-by: Matthew R. Ochs <mochs@nvidia.com>
Signed-off-by: Joseph Jang <jjang@nvidia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently, if alsa development package is not installed on the user's
system then the make command would print a `pagefull` of errors. In
particular one error message is repeated 3 times. This error is returned
by `pkg-config` and since it is not being handeled appropriately,
repeated calls to `pkg-config` prints the same message again.
This patch adds check for alsa package installation. If alsa is not
installed, a short and consize error is returned. Also, it does not
affect the compilation of other tests.
Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20240922225824.18918-1-abdul.rahim@myyahoo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One urgent fix to vDSO as automated testing is failing due to this
bug"
* tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vDSO: align stack for O2-optimized memcpy
|
|
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Clean up and improve vdso code: use SYM_* macros for function and
data annotations, add CFI annotations to fix GDB unwinding, optimize
the chacha20 implementation
- Add vfio-ap driver feature advertisement for use by libvirt and
mdevctl
* tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Driver feature advertisement
s390/vdso: Use one large alternative instead of an alternative branch
s390/vdso: Use SYM_DATA_START_LOCAL()/SYM_DATA_END() for data objects
tools: Add additional SYM_*() stubs to linkage.h
s390/vdso: Use macros for annotation of asm functions
s390/vdso: Add CFI annotations to __arch_chacha20_blocks_nostack()
s390/vdso: Fix comment within __arch_chacha20_blocks_nostack()
s390/vdso: Get rid of permutation constants
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link (cxl) updates from Dave Jiang:
"Major changes address HDM decoder initialization from DVSEC ranges,
refactoring the code related to cxl mailboxes to be independent of the
memory devices, and adding support for shared upstream link
access_coordinate calculation, as well as a change to remove locking
from memory notifier callback.
In addition, a number of misc cleanups and refactoring of the code are
also included.
Address HDM decoder initialization from DVSEC ranges:
- Only register non-zero DVSEC ranges
- Remove duplicate implementation of waiting for memory_info_valid
- Simplify the checking of mem_enabled in cxl_hdm_decode_init()
Refactor the code related to cxl mailboxes to be independent of the memory devices:
- Move cxl headers in include/linux/ to include/cxl
- Move all mailbox related data to 'struct cxl_mailbox'
- Refactor mailbox APIs with 'struct cxl_mailbox' as input instead of
memory device state
Add support for shared upstream link access_coordinate calculation for
configurations that have multiple targets under a switch or a root
port where the aggregated bandwidth can be greater than the upstream
link of the switch/RP upstream link:
- Preserve the CDAT access_coordinate from an endpoint
- Add the support for shared upstream link access_coordinate calculation
- Add documentation to explain how the calculations are done
Remove locking from memory notifier callback.
Misc cleanups:
- Convert devm_cxl_add_root() to return using ERR_CAST()
- cxl_test use dev_is_platform() instead of open coding
- Remove duplicate include of header core.h in core/cdat.c
- use scoped resource management to drop put_device() for cxl_port
- Use scoped_guard to drop device_lock() for cxl_port
- Refactor __devm_cxl_add_port() to drop gotos
- Rename cxl_setup_parent_dport to cxl_dport_init_aer and
cxl_dport_map_regs() to cxl_dport_map_ras()
- Refactor cxl_dport_init_aer() to be more concise
- Remove duplicate host_bridge->native_aer checking in
cxl_dport_init_ras_reporting()
- Fix comment for cxl_query_cmd()"
* tag 'cxl-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
cxl: Add documentation to explain the shared link bandwidth calculation
cxl: Calculate region bandwidth of targets with shared upstream link
cxl: Preserve the CDAT access_coordinate for an endpoint
cxl: Fix comment regarding cxl_query_cmd() return data
cxl: Convert cxl_internal_send_cmd() to use 'struct cxl_mailbox' as input
cxl: Move mailbox related bits to the same context
cxl: move cxl headers to new include/cxl/ directory
cxl/region: Remove lock from memory notifier callback
cxl/pci: simplify the check of mem_enabled in cxl_hdm_decode_init()
cxl/pci: Check Mem_info_valid bit for each applicable DVSEC
cxl/pci: Remove duplicated implementation of waiting for memory_info_valid
cxl/pci: Fix to record only non-zero ranges
cxl/pci: Remove duplicate host_bridge->native_aer checking
cxl/pci: cxl_dport_map_rch_aer() cleanup
cxl/pci: Rename cxl_setup_parent_dport() and cxl_dport_map_regs()
cxl/port: Refactor __devm_cxl_add_port() to drop goto pattern
cxl/port: Use scoped_guard()/guard() to drop device_lock() for cxl_port
cxl/port: Use __free() to drop put_device() for cxl_port
cxl: Remove duplicate included header file core.h
tools/testing/cxl: Use dev_is_platform()
...
|
|
When switching on -O2, gcc generates SSE2 instructions that assume a
16-byte aligned stack, which the standalone test's start point wasn't
aligning. Fix this with the usual alignment sequence.
Fixes: ecb8bd70d51 ("selftests: vDSO: build tests with O2 optimization")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409241558.98e13f6f-oliver.sang@intel.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. 13 are cc:stable.
There's a focus on fixes for the memfd_pin_folios() work which was
added into 6.11. Apart from that, the usual shower of singleton fixes"
* tag 'mm-hotfixes-stable-2024-09-27-09-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
ocfs2: fix uninit-value in ocfs2_get_block()
zram: don't free statically defined names
memory tiers: use default_dram_perf_ref_source in log message
Revert "list: test: fix tests for list_cut_position()"
kselftests: mm: fix wrong __NR_userfaultfd value
compiler.h: specify correct attribute for .rodata..c_jump_table
mm/damon/Kconfig: update DAMON doc URL
mm: kfence: fix elapsed time for allocated/freed track
ocfs2: fix deadlock in ocfs2_get_system_file_inode
ocfs2: reserve space for inline xattr before attaching reflink tree
mm: migrate: annotate data-race in migrate_folio_unmap()
mm/hugetlb: simplify refs in memfd_alloc_folio
mm/gup: fix memfd_pin_folios alloc race panic
mm/gup: fix memfd_pin_folios hugetlb page allocation
mm/hugetlb: fix memfd_pin_folios resv_huge_pages leak
mm/hugetlb: fix memfd_pin_folios free_huge_pages leak
mm/filemap: fix filemap_get_folios_contig THP panic
mm: make SPLIT_PTE_PTLOCKS depend on SMP
tools: fix shared radix-tree build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Fix objtool about do_syscall() and Clang
- Enable generic CPU vulnerabilites support
- Enable ACPI BGRT handling
- Rework CPU feature probe from CPUCFG/IOCSR
- Add ARCH_HAS_SET_MEMORY support
- Add ARCH_HAS_SET_DIRECT_MAP support
- Improve hardware page table walker
- Simplify _percpu_read() and _percpu_write()
- Add advanced extended IRQ model documentions
- Some bug fixes and other small changes
* tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
Docs/LoongArch: Add advanced extended IRQ model description
LoongArch: Remove posix_types.h include from sigcontext.h
LoongArch: Fix memleak in pci_acpi_scan_root()
LoongArch: Simplify _percpu_read() and _percpu_write()
LoongArch: Improve hardware page table walker
LoongArch: Add ARCH_HAS_SET_DIRECT_MAP support
LoongArch: Add ARCH_HAS_SET_MEMORY support
LoongArch: Rework CPU feature probe from CPUCFG/IOCSR
LoongArch: Enable ACPI BGRT handling
LoongArch: Enable generic CPU vulnerabilites support
LoongArch: Remove STACK_FRAME_NON_STANDARD(do_syscall)
LoongArch: Set AS_HAS_THIN_ADD_SUB as y if AS_IS_LLVM
LoongArch: Enable objtool for Clang
objtool: Handle frame pointer related instructions
|
|
There is no return value in count_entries, just add it.
Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone")
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
As a side-effect of nftables' commit dbff26bfba833 ("cache: consolidate
reset command"), audit logs changed when more objects were reset than
fit into a single netlink message.
Since the objects' distribution in netlink messages is not relevant,
implement a summarizing function which combines repeated audit logs into
a single one with summed up 'entries=' value.
Fixes: 203bb9d39866 ("selftests: netfilter: Extend nft_audit.sh")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
