summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2025-04-26Merge tag 'move-lib-kunit-v6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kunit fix from Kees Cook: "A single fix for the kunit lib/tests/ relocation: - Ensure prime numbers tests are included in KUnit test runs (Mark Brown)" * tag 'move-lib-kunit-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lib: Ensure prime numbers tests are included in KUnit test runs
2025-04-25selftests: net: bridge_vlan_aware: test untagged/8021p-tagged with and ↵Vladimir Oltean
without PVID Recent discussions around commit ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") have sparked the question what happens with the DSA (and possibly other switchdev) data path when the bridge says that ports should have no PVID VLAN, but the 8021q module, as the result of a NETDEV_UP event, decides it should add VID 0 to the RX filter of those bridge ports. Do those bridge ports receive packets tagged with VID 0 or not, now? We don't know, there is no test. In the veth realm, this passes trivially, because veth is not VLAN filtering and this, the 8021q module lacks the instinct to add VID 0 in the first place. In the realm of VLAN filtering NICs with no switchdev offload, this should also pass, because the VLAN groups of the software bridge are consulted, where it can clearly be seen that a PVID is missing, even though the packet was initially accepted by the NIC. The test only poses a challenge for switchdev drivers, which usually have to program to hardware both VLANs from RX filtering, as well as from switchdev. Especially when a switchdev port joins a VLAN-aware bridge, it is unavoidable that it gains the NETIF_F_HW_VLAN_CTAG_FILTER feature, i.e. any 8021q uppers that the bridge port may have must also be committed to the RX filtering table of the interface. When a VLAN-tagged packet is physically received by the port, it is initially indistinguishable whether it will reach the bridge data path or the 8021q upper data path. That is rather the final step of the new tests that we introduce. We need to build context up to that stage, which means the following: - we need to test that 802.1p (VID 0) tagged traffic is received in the first place (on bridge ports with a valid PVID). This is the "8021p" test. - we need to test that the usual paths of reaching a configuration with no PVID on a bridge port are all covered and they all reach the same state. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250424223734.3096202-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-25Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfLinus Torvalds
Pull bpf fixes from Alexei Starovoitov: - Add namespace to BPF internal symbols (Alexei Starovoitov) - Fix possible endless loop in BPF map iteration (Brandon Kammerdiener) - Fix compilation failure for samples/bpf on LoongArch (Haoran Jiang) - Disable a part of sockmap_ktls test (Ihor Solodrai) - Correct typo in __clang_major__ macro (Peilin Ye) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Correct typo in __clang_major__ macro samples/bpf: Fix compilation failure for samples/bpf on LoongArch Fedora bpf: Add namespace to BPF internal symbols selftests/bpf: add test for softlock when modifying hashmap while iterating bpf: fix possible endless loop in BPF map iteration selftests/bpf: Mitigate sockmap_ktls disconnect_after_delete failure
2025-04-25selftests/bpf: Correct typo in __clang_major__ macroPeilin Ye
Make sure that CAN_USE_BPF_ST test (compute_live_registers/store) is enabled when __clang_major__ >= 18. Fixes: 2ea8f6a1cda7 ("selftests/bpf: test cases for compute_live_registers()") Signed-off-by: Peilin Ye <yepeilin@google.com> Link: https://lore.kernel.org/r/20250425213712.1542077-1-yepeilin@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-25Merge tag 'cxl-fixes-6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl fixes from Dave Jiang: "The fixes address global persistent flush (GPF) changes and CXL Features support changes that went in the 6.15 merge window. And also a fix to an issue observed on CXL 1.1 platform during device enumeration. Summary: - Fix using the wrong GPF DVSEC location: - Fix caching of dport GPF DVSEC from the first endpoint - Ensure that the GPF phase timeout is only updated once by first endpoint - Drop is_port parameter for cxl_gpf_get_dvsec() - Fix the devm_* call host device for CXL fwctl setup - Set the out_len in Set Features failure case - Fix RCD initialization by skipping unneeded mem_en check" * tag 'cxl-fixes-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/core/regs.c: Skip Memory Space Enable check for RCD and RCH Ports cxl/feature: Update out_len in set feature failure case cxl: Fix devm host device for CXL fwctl initialization cxl/pci: Drop the parameter is_port of cxl_gpf_get_dvsec() cxl/pci: Update Port GPF timeout only when the first EP attaching cxl/core: Fix caching dport GPF DVSEC issue
2025-04-25Merge tag 'block-6.15-20250424' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - Fix autoloading of drivers from stat*(2) - Fix losing read-ahead setting one suspend/resume, when a device is re-probed. - Fix race between setting the block size and page cache updates. Includes a helper that a coming XFS fix will use as well. - ublk cancelation fixes. - ublk selftest additions and fixes. - NVMe pull via Christoph: - fix an out-of-bounds access in nvmet_enable_port (Richard Weinberger) * tag 'block-6.15-20250424' of git://git.kernel.dk/linux: ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA block: don't autoload drivers on blk-cgroup configuration block: don't autoload drivers on stat block: remove the backing_inode variable in bdev_statx block: move blkdev_{get,put} _no_open prototypes out of blkdev.h block: never reduce ra_pages in blk_apply_bdi_limits selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx' selftests: ublk: fix recover test block: hoist block size validation code to a separate function block: fix race between set_blocksize and read paths nvmet: fix out-of-bounds access in nvmet_enable_port
2025-04-25selftests/bpf: add test for softlock when modifying hashmap while iteratingBrandon Kammerdiener
Add test that modifies the map while it's being iterated in such a way that hangs the kernel thread unless the _safe fix is applied to bpf_for_each_hash_elem. Signed-off-by: Brandon Kammerdiener <brandon.kammerdiener@intel.com> Link: https://lore.kernel.org/r/20250424153246.141677-3-brandon.kammerdiener@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Hou Tao <houtao1@huawei.com>
2025-04-25Merge branch 'perf/urgent'Peter Zijlstra
Merge urgent fixes for dependencies. Signed-off-by: Peter Zijlstra <peterz@infradead.org>
2025-04-25tools/hv: update route parsing in kvp daemonOlaf Hering
After recent changes in the VM network stack, the host fails to display the IP addresses of the VM. As a result the "IP Addresses" column in the "Networking" tab in the Windows Hyper-V Manager is empty. This is caused by a change in the expected output of the "ip route show" command. Previously the gateway address was shown in the third row. Now the gateway addresses might be split into several lines of output. As a result, the string "ra" instead of an IP address is sent to the host. To me more specific, a VM with the wellknown wicked network managing tool still shows the expected output in recent openSUSE Tumbleweed snapshots: ip a show dev uplink;ip -4 route show;ip -6 route show 2: uplink: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state ... link/ether 00:15:5d:d0:93:08 brd ff:ff:ff:ff:ff:ff inet 1.2.3.4/22 brd 1.2.3.255 scope global uplink valid_lft forever preferred_lft forever inet6 fe80::215:5dff:fed0:9308/64 scope link proto kernel_ll valid_lft forever preferred_lft forever default via 1.2.3.254 dev uplink proto dhcp 1.2.3.0/22 dev uplink proto kernel scope link src 1.2.3.4 fe80::/64 dev uplink proto kernel metric 256 pref medium default via fe80::26fc:4e00:3b:74 dev uplink proto ra metric 1024 exp... default via fe80::6a22:8e00:fb:14f8 dev uplink proto ra metric 1024 e... A similar VM, but with NetworkManager as network managing tool: ip a show dev eth0;ip -4 route show;ip -6 route show 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP... link/ether 00:15:5d:d0:93:0b brd ff:ff:ff:ff:ff:ff inet 1.2.3.8/22 brd 1.2.3.255 scope global dynamic noprefixroute ... valid_lft 1022sec preferred_lft 1022sec inet6 fe80::215:5dff:fed0:930b/64 scope link noprefixroute valid_lft forever preferred_lft forever default via 1.2.3.254 dev eth0 proto dhcp src 1.2.3.8 metric 100 1.2.3.0/22 dev eth0 proto kernel scope link src 1.2.3.8 metric 100 fe80::/64 dev eth0 proto kernel metric 1024 pref medium default proto ra metric 20100 pref medium nexthop via fe80::6a22:8e00:fb:14f8 dev eth0 weight 1 nexthop via fe80::26fc:4e00:3b:74 dev eth0 weight 1 Adjust the route parsing to use a single line for each line of output. Also use a single shell invocation to retrieve both IPv4 and IPv6 information. The actual IP addresses are expected after the "via" keyword. Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Link: https://lore.kernel.org/r/20241202102235.9701-1-olaf@aepfle.de Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20241202102235.9701-1-olaf@aepfle.de>
2025-04-24Merge branch 'block-6.15' into for-6.16/blockJens Axboe
Merge 6.15 block fixes - both to get the fixes causing issues with XFS testing, but also to make it easier for 6.16 ublk patches to avoid conflicts. * block-6.15: ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA block: don't autoload drivers on blk-cgroup configuration block: don't autoload drivers on stat block: remove the backing_inode variable in bdev_statx block: move blkdev_{get,put} _no_open prototypes out of blkdev.h block: never reduce ra_pages in blk_apply_bdi_limits selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx' selftests: ublk: fix recover test block: hoist block size validation code to a separate function block: fix race between set_blocksize and read paths nvmet: fix out-of-bounds access in nvmet_enable_port
2025-04-24Merge tag 'landlock-6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock fixes from Mickaël Salaün: "Fix some Landlock audit issues, add related tests, and updates documentation" * tag 'landlock-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: landlock: Update log documentation landlock: Fix documentation for landlock_restrict_self(2) landlock: Fix documentation for landlock_create_ruleset(2) selftests/landlock: Add PID tests for audit records selftests/landlock: Factor out audit fixture in audit_test landlock: Log the TGID of the domain creator landlock: Remove incorrect warning
2025-04-24x86/insn: Fix CTEST instruction decodingKirill A. Shutemov
insn_decoder_test found a problem with decoding APX CTEST instructions: Found an x86 instruction decoder bug, please report this. ffffffff810021df 62 54 94 05 85 ff ctestneq objdump says 6 bytes, but insn_get_length() says 5 It happens because x86-opcode-map.txt doesn't specify arguments for the instruction and the decoder doesn't expect to see ModRM byte. Fixes: 690ca3a3067f ("x86/insn: Add support for APX EVEX instructions to the opcode map") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v6.10+ Link: https://lore.kernel.org/r/20250423065815.2003231-1-kirill.shutemov@linux.intel.com
2025-04-24Merge tag 'net-6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "No fixes from any subtree. Current release - regressions: - net: fix the missing unlock for detached devices Previous releases - regressions: - sched: fix UAF vulnerability in HFSC qdisc - lwtunnel: disable BHs when required - mptcp: pm: defer freeing of MPTCP userspace path manager entries - tipc: fix NULL pointer dereference in tipc_mon_reinit_self() - eth: virtio-net: disable delayed refill when pausing rx Previous releases - always broken: - phylink: fix suspend/resume with WoL enabled and link down - eth: - mlx5: fix null-ptr-deref in mlx5_create_{inner_,}ttc_table() - xen-netfront: handle NULL returned by xdp_convert_buff_to_frame() - enetc: fix frame corruption on bpf_xdp_adjust_head/tail() and XDP_PASS - stmmac: fix dwmac1000 ptp timestamp status offset - pds_core: prevent possible adminq overflow/stuck condition Misc: - a bunch of MAINTAINERS updates" * tag 'net-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits) net: stmmac: fix multiplication overflow when reading timestamp net: stmmac: fix dwmac1000 ptp timestamp status offset net: dp83822: Fix OF_MDIO config check pds_core: make wait_context part of q_info pds_core: Remove unnecessary check in pds_client_adminq_cmd() pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result pds_core: Prevent possible adminq overflow/stuck condition net: dsa: mt7530: sync driver-specific behavior of MT7531 variants selftests/tc-testing: Add test for HFSC queue emptying during peek operation net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too net_sched: hfsc: Fix a UAF vulnerability in class handling selftests: mptcp: diag: use mptcp_lib_get_info_value mptcp: pm: Defer freeing of MPTCP userspace path manager entries net: ethernet: mtk_eth_soc: net: revise NETSYSv3 hardware configuration tipc: fix NULL pointer dereference in tipc_mon_reinit_self() virtio-net: disable delayed refill when pausing rx net: phy: leds: fix memory leak net: phylink: mac_link_(up|down)() clarifications net: phylink: fix suspend/resume with WoL enabled and link down net: lwtunnel: disable BHs when required ...
2025-04-24selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutilsUday Shankar
Some distributions, such as centos stream 9, still have a version of coreutils which does not yet support the %Hr and %Lr formats for stat(1) [1, 2]. Running ublk selftests on these distributions results in the following error in tests that use the _get_disk_dev_t helper: line 23: ?r: syntax error: operand expected (error token is "?r") To better accommodate older distributions, rewrite _get_disk_dev_t to use the much older %t and %T formats for stat instead. [1] https://github.com/coreutils/coreutils/blob/v9.0/NEWS#L114 [2] https://pkgs.org/download/coreutils Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250423-ublk_selftests-v1-2-7d060e260e76@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-24selftests/fs/mount-notify: test also remove/flush of mntns marksAmir Goldstein
Regression test for FAN_MARK_MNTFS | FAN_MARK_FLUSH bug. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250418193903.2607617-3-amir73il@gmail.com
2025-04-23selftests/tc-testing: Add test for HFSC queue emptying during peek operationCong Wang
Add a selftest to exercise the condition where qdisc implementations like netem or codel might empty the queue during a peek operation. This tests the defensive code path in HFSC that checks the queue length again after peeking to handle this case. Based on the reproducer from Gerrard, improved by Jamal. Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20250417184732.943057-4-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23selftests: mptcp: diag: use mptcp_lib_get_info_valueGeliang Tang
When running diag.sh in a loop, chk_dump_one will report the following "grep: write error": 13 ....chk 2 cestab [ OK ] grep: write error 14 ....chk dump_one [ OK ] 15 ....chk 2->0 msk in use after flush [ OK ] 16 ....chk 2->0 cestab after flush [ OK ] This error is caused by a broken pipe. When the output of 'ss' is processed by grep, 'head -n 1' will exit immediately after getting the first line, causing the subsequent pipe to close. At this time, if 'grep' is still trying to write data to the closed pipe, it will trigger a SIGPIPE signal, causing a write error. One solution is not to use this problematic "head -n 1" command, but to use mptcp_lib_get_info_value() helper defined in mptcp_lib.sh to get the value of 'token'. Fixes: ba2400166570 ("selftests: mptcp: add a test for mptcp_diag_dump_one") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Tested-by: Gang Yan <yangang@kylinos.cn> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250421-net-mptcp-pm-defer-freeing-v1-2-e731dc6e86b9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'Ming Lei
'delay_us' shouldn't be added to 'struct dev_ctx' since now it is handled by per-target command line & 'struct fault_inject_ctx'. So remove it. Fixes: 81586652bb1f ("selftests: ublk: add generic_06 for covering fault inject") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Uday Shankar <ushankar@purestorage.com> Link: https://lore.kernel.org/r/20250421235947.715272-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-23selftests: ublk: fix recover testMing Lei
When adding recovery test: - 'break' is missed for handling '-g' argument - test name of test_generic_05.sh is wrong So fix the two. Fixes: 57e13a2e8cd2 ("selftests: ublk: support user recovery") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Uday Shankar <ushankar@purestorage.com> Link: https://lore.kernel.org/r/20250421235947.715272-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-23tools/memory-model/Documentation: Fix SRCU section in explanation.txtUladzislau Rezki (Sony)
The SRCU read-side critical sections describes the difference between srcu_down_read()/srcu_up_read() and srcu_read_lock()/srcu_read_unlock() in a way that a last pair must occur on the same CPU. This is not true, the srcu_read_unlock() can happen on any CPU, but it must be performed by the same task that invoked srcu_read_lock(). Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2025-04-23selftests/bpf: Mitigate sockmap_ktls disconnect_after_delete failureIhor Solodrai
"sockmap_ktls disconnect_after_delete" test has been failing on BPF CI after recent merges from netdev: * https://github.com/kernel-patches/bpf/actions/runs/14458537639 * https://github.com/kernel-patches/bpf/actions/runs/14457178732 It happens because disconnect has been disabled for TLS [1], and it renders the test case invalid. Removing all the test code creates a conflict between bpf and bpf-next, so for now only remove the offending assert [2]. The test will be removed later on bpf-next. [1] https://lore.kernel.org/netdev/20250404180334.3224206-1-kuba@kernel.org/ [2] https://lore.kernel.org/bpf/cfc371285323e1a3f3b006bfcf74e6cf7ad65258@linux.dev/ Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Link: https://lore.kernel.org/bpf/20250416170246.2438524-1-ihor.solodrai@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-23perf tools: Fix arm64 build by generating unistd_64.hJames Clark
Since pulling in the kernel changes in commit 22f72088ffe6 ("tools headers: Update the syscall table with the kernel sources"), arm64 is no longer using a generic syscall header and generates one from the syscall table. Therefore we must also generate the syscall header for arm64 before building Perf. Add it as a dependency to libperf which uses one syscall number. Perf uses more, but as libperf is a dependency of Perf it will be generated for both. Future platforms that need this will have to add their own syscall-y targets in libperf manually. Unfortunately the arch specific files that do this (e.g. arch/arm64/include/asm/Kbuild) can't easily be imported into the Perf build. But Perf only needs a subset of the generated files anyway, so redefining them is probably the correct thing to do. Fixes: 22f72088ffe6 ("tools headers: Update the syscall table with the kernel sources") Signed-off-by: James Clark <james.clark@linaro.org> Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20250417-james-perf-fix-gen-syscall-v1-1-1d268c923901@linaro.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-04-22tools/memory-model: docs/references: Remove broken link to imgtec.comAkira Yokosawa
MIPS documents are not provided at imgtec.com any more. Get rid of useless link. Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Andrea Parri <parri.andrea@gmail.com>
2025-04-22tools/memory-model: docs/ordering: Fix trivial typosAkira Yokosawa
Fix trivial typos including: - Repeated "a call to" - Inconsistent forms of referencing functions of rcu_dereference() and rcu_assign_pointer() - Past tense used in describing normal behavior and other minor ones. [ paulmck: Wordsmith plus recent LWN RCU API URL. ] Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Andrea Parri <parri.andrea@gmail.com>
2025-04-22tools/memory-model: docs/simple.txt: Fix trivial typosAkira Yokosawa
Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Andrea Parri <parri.andrea@gmail.com>
2025-04-22tools/memory-model: docs/README: Update introduction of locking.txtAkira Yokosawa
Commit 9bc931e9e161 ("tools/memory-model: Add locking.txt and glossary.txt to README") failed to mention the relation of the "Locking" section in recipes.txt and locking.txt. The latter is a detailed version of the former intended to be read on its own. Reword the description in README and add notes in locking.txt and recipes.txt to clarify their relationship. [ paulmck: Wordsmithing. ] Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Andrea Parri <parri.andrea@gmail.com>
2025-04-22lib: Ensure prime numbers tests are included in KUnit test runsMark Brown
When the select of PRIME_MUMBERS was removed from it's KUnit test Kconfig nothing was added to the KUnit configs, meaning that when run via the KUnit runner the tests are neither built nor run. Add PRIME_NUMBERS to all_tests.config so they are enabled when the KUnit runner builds the kernel. Fixes: 3f2925174f8b ("lib/prime_numbers: KUnit test should not select PRIME_NUMBERS") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250422-lib-fix-prime-numbers-kunit-v1-1-4278c1d4a4ae@kernel.org Signed-off-by: Kees Cook <kees@kernel.org>
2025-04-22PM: sleep: Use two lines for "Restarting..." / "done" messagesAndrew Sayers
Other messages are occasionally printed between these two, for example: [203104.106534] Restarting tasks ... [203104.106559] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [203104.112354] done. This seems to be a timing issue, seen in two of the eleven hibernation exits in my current `dmesg` output. When printed on its own, the "done" message has the default log level. This makes the output of `dmesg --level=warn` quite misleading. Add enough context for the "done" messages to make sense on their own, and use the same log level for all messages. Change the messages to "<event>..." / "Done <event>.", unlike a449dfbfc089 which uses "<event>..." / "<event> completed.". Front-loading the unique part of the message makes it easier to scan the log, and reduces ambiguity for users who aren't confident in their English comprehension. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Andrew Sayers <kernel.org@pileofstuff.org> Link: https://patch.msgid.link/20250411152632.2806038-1-kernel.org@pileofstuff.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-04-22tools/nolibc: implement width padding in printf()Thomas Weißschuh
printf can pad each argument to a certain width. Implement this for compatibility with the kselftest harness. Currently only padding with spaces is supported. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22selftests/nolibc: add test for snprintf() truncationThomas Weißschuh
Now that we have a proper snprintf() implementation, make sure truncation is handled properly. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22selftests/nolibc: rename vfprintf test suiteThomas Weißschuh
With the addition of snprintf() and its usage in nolibc-test, the name of the "vfprintf" test suite is not accurate anymore. Rename the suite to be more generic. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22selftests/nolibc: use snprintf() for printf testsThomas Weißschuh
With a proper snprintf() implementation in place, the ugly pipe usage is not necessary anymore. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: add snprintf() and friendsThomas Weißschuh
Add more of the printf() functions. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: allow limiting of printf destination sizeThomas Weißschuh
snprintf() allows limiting the output buffer, while still returning the number of all bytes that would have been written. Implement the limitation logic in preparation for snprintf(). Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: allow different write callbacks in printfThomas Weißschuh
Decouple the formatting logic from the writing logic to later enable writing straight to a buffer in sprintf(). Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: add getopt()Thomas Weißschuh
Introduce a getopt() implementation based on the one from musl. The only deviations are adaption to the kernel coding style and nolibc infrastructure and removal of multi-byte support. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: add dprintf() and vdprintf()Thomas Weißschuh
dprintf() and vdprintf() are printf() variants printing directly into a filedescriptor. As FILE in nolibc is based directly on filedescriptors, the implementation is trivial. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22Revert "selftests/nolibc: use waitid() over waitpid()"Thomas Weißschuh
nolibc's waitpid() now uses the waitid() syscall internally. This removes the original reasoning for the reverted commit as waitpid() is now available on all platforms and has an easier interface. Switch back to waitpid(). This reverts commit a0bc8947ac731ff95a56e0c1737e69e8c56d5b78. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: implement waitpid() in terms of waitid()Thomas Weißschuh
The old wait4() syscall used by waitpid() before is not available everywhere. Switch to the waitid() syscall which is the new replacement. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: add setpgrp()Thomas Weißschuh
setpgrp() is defined to be identical to setpgid(0, 0). Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: add _exit()Thomas Weißschuh
_exit() is the faster variant of exit(), skipping all cleanup actions. As nolibc does not perform any cleanup anyways, the implementation is trivial. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: add tolower() and toupper()Thomas Weißschuh
The kselftest harness uses these functions. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: use ppoll_time64 if availableThomas Weißschuh
riscv32 does not have any of the older poll systemcalls. Use ppoll_time64 instead. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: use pselect6_time64 if availableThomas Weißschuh
riscv32 does not have any of the older select systemcalls. Use pselect6_time64 instead. poll() is also used to implement sleep(). Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: use intmax definitions from compilerThomas Weißschuh
The printf format checking in the compiler uses the intmax types from the compiler, not libc. This can lead to compiler errors. Instead use the types already provided by the compiler. Example issue with clang 19 for arm64: nolibc-test.c:30:2: error: format specifies type 'uintmax_t' (aka 'unsigned long') but the argument has type 'uintmax_t' (aka 'unsigned long long') [-Werror,-Wformat] Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-22tools/nolibc: handle intmax_t/uintmax_t in printfThomas Weißschuh
In nolibc intmax_t and uintmax_t are always the same as (unsigned) long long/uint64_t as 128bit numbers are not supported. Even libcs that do support 128bit numbers often fix intmax_t to 64bit as it is used in ABIs and any change would break those. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu>
2025-04-21Merge tag 'sched_ext-for-6.15-rc3-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fixes from Tejun Heo: - Use kvzalloc() so that large exit_dump buffer allocations don't fail easily - Remove cpu.weight / cpu.idle unimplemented warnings which are more annoying than helpful. This makes SCX_OPS_HAS_CGROUP_WEIGHT unnecessary. Mark it for deprecation * tag 'sched_ext-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Mark SCX_OPS_HAS_CGROUP_WEIGHT for deprecation sched_ext: Remove cpu.weight / cpu.idle unimplemented warnings sched_ext: Use kvzalloc for large exit_dump allocation
2025-04-21fs: remove uselib() system callChristian Brauner
This system call has been deprecated for quite a while now. Let's try and remove it from the kernel completely. Link: https://lore.kernel.org/20250415-kanufahren-besten-02ac00e6becd@brauner Acked-by: Kees Cook <kees@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-04-19Merge tag 'trace-v6.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Initialize hash variables in ftrace subops logic The fix that simplified the ftrace subops logic opened a path where some variables could be used without being initialized, and done subtly where the compiler did not catch it. Initialize those variables to the EMPTY_HASH, which is the default hash. - Reinitialize the hash pointers after they are freed Some of the hash pointers in the subop logic were freed but may still be referenced later. To prevent use-after-free bugs, initialize them back to the EMPTY_HASH. - Free the ftrace hashes when they are replaced The fix that simplified the subops logic updated some hash pointers, but left the original hash that they were pointing to where they are no longer used. This caused a memory leak. Free the hashes that are pointed to by the pointers when they are replaced. - Fix size initialization of ftrace direct function hash The ftrace direct function hash used by BPF initialized the hash size incorrectly. It checked the size of items to a hard coded 32, which made the hash bit size of 5. The hash size is supposed to be limited by the bit size of the hash, as the bitmask is allowed to be greater than 5. Rework the size check to first pass the number of elements to fls() and then compare that to FTRACE_HASH_MAX_BITS before allocating the hash. - Fix format output of ftrace_graph_ent_entry event The field depth of the ftrace_graph_ent_entry event is of size 4 but the output showed it as unsigned long and use "%lu". Change it to unsigned int and use "%u" in the print format that is displayed to user space. - Fix the trace event filter on strings Events can be filtered on numbers or string values. The return value checked from strncpy_from_kernel_nofault() and strncpy_from_user_nofault() was used to determine if reading the strings would fault or not. It would return fault if the value was non zero, which is basically meant that it was always considering the read as a fault. - Add selftest to test trace event string filtering In order to catch the breakage of the string filtering, add a self test to make sure that it continues to work. * tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: selftests: Add testing a user string to filters tracing: Fix filter string testing ftrace: Fix type of ftrace_graph_ent_entry.depth ftrace: fix incorrect hash size in register_ftrace_direct() ftrace: Free ftrace hashes after they are replaced in the subops code ftrace: Reinitialize hash to EMPTY_HASH after freeing ftrace: Initialize variables for ftrace_startup/shutdown_subops()
2025-04-19Merge tag 'rust-fixes-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux Pull rust fixes from Miguel Ojeda: "Toolchain and infrastructure: - Fix missing KASAN LLVM flags on first build (and fix spurious rebuilds) by skipping '--target' - Fix Make < 4.3 build error by using '$(pound)' - Fix UML build error by removing 'volatile' qualifier from io helpers - Fix UML build error by adding 'dma_{alloc,free}_attrs()' helpers - Clean gendwarfksyms warnings by avoiding to export '__pfx' symbols - Clean objtool warning by adding a new 'noreturn' function for 1.86.0 - Disable 'needless_continue' Clippy lint due to new 1.86.0 warnings - Add missing 'ffi' crate to 'generate_rust_analyzer.py' 'pin-init' crate: - Import a couple fixes from upstream" * tag 'rust-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: rust: helpers: Add dma_alloc_attrs() and dma_free_attrs() rust: helpers: Remove volatile qualifier from io helpers rust: kbuild: use `pound` to support GNU Make < 4.3 objtool/rust: add one more `noreturn` Rust function for Rust 1.86.0 rust: kasan/kbuild: fix missing flags on first build rust: disable `clippy::needless_continue` rust: kbuild: Don't export __pfx symbols rust: pin-init: use Markdown autolinks in Rust comments rust: pin-init: alloc: restrict `impl ZeroableOption` for `Box` to `T: Sized` scripts: generate_rust_analyzer: Add ffi crate
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 08:00:50 +0000