summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2024-11-18Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for running Linux in a protected VM under the Arm Confidential Compute Architecture (CCA) - Guarded Control Stack user-space support. Current patches follow the x86 ABI of implicitly creating a shadow stack on clone(). Subsequent patches (already on the list) will add support for clone3() allowing finer-grained control of the shadow stack size and placement from libc - AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are getting close with the upcoming dpISA support) - Other arch features: - In-kernel use of the memcpy instructions, FEAT_MOPS (previously only exposed to user; uaccess support not merged yet) - MTE: hugetlbfs support and the corresponding kselftests - Optimise CRC32 using the PMULL instructions - Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG - Optimise the kernel TLB flushing to use the range operations - POE/pkey (permission overlays): further cleanups after bringing the signal handler in line with the x86 behaviour for 6.12 - arm64 perf updates: - Support for the NXP i.MX91 PMU in the existing IMX driver - Support for Ampere SoCs in the Designware PCIe PMU driver - Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC - Support for Samsung's 'Mongoose' CPU PMU - Support for PMUv3.9 finer-grained userspace counter access control - Switch back to platform_driver::remove() now that it returns 'void' - Add some missing events for the CXL PMU driver - Miscellaneous arm64 fixes/cleanups: - Page table accessors cleanup: type updates, drop unused macros, reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity check addresses before runtime P4D/PUD folding - Command line override for ID_AA64MMFR0_EL1.ECV (advertising the FEAT_ECV for the generic timers) allowing Linux to boot with firmware deployments that don't set SCTLR_EL3.ECVEn - ACPI/arm64: tighten the check for the array of platform timer structures and adjust the error handling procedure in gtdt_parse_timer_block() - Optimise the cache flush for the uprobes xol slot (skip if no change) and other uprobes/kprobes cleanups - Fix the context switching of tpidrro_el0 when kpti is enabled - Dynamic shadow call stack fixes - Sysreg updates - Various arm64 kselftest improvements * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits) arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled kselftest/arm64: Try harder to generate different keys during PAC tests kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all() arm64/ptrace: Clarify documentation of VL configuration via ptrace kselftest/arm64: Corrupt P0 in the irritator when testing SSVE acpi/arm64: remove unnecessary cast arm64/mm: Change protval as 'pteval_t' in map_range() kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c kselftest/arm64: Add FPMR coverage to fp-ptrace kselftest/arm64: Expand the set of ZA writes fp-ptrace does kselftets/arm64: Use flag bits for features in fp-ptrace assembler code kselftest/arm64: Enable build of PAC tests with LLVM=1 kselftest/arm64: Check that SVCR is 0 in signal handlers selftests/mm: Fix unused function warning for aarch64_write_signal_pkey() kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests kselftest/arm64: Fix build with stricter assemblers arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux() arm64/scs: Deal with 64-bit relative offsets in FDE frames ...
2024-11-18Merge tag 'vfs-6.13.pidfs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull pidfs update from Christian Brauner: "This adds a new ioctl to retrieve information about a pidfd. A common pattern when using pidfds is having to get information about the process, which currently requires /proc being mounted, resolving the fd to a pid, and then do manual string parsing of /proc/N/status and friends. This needs to be reimplemented over and over in all userspace projects (e.g.: it has been reimplemented in systemd, dbus, dbus-daemon, polkit so far), and requires additional care in checking that the fd is still valid after having parsed the data, to avoid races. Having a programmatic API that can be used directly removes all these requirements, including having /proc mounted. As discussed at LPC24, add an ioctl with an extensible struct so that more parameters can be added later if needed. Start with returning pid/tgid/ppid and some creds unconditionally, and cgroupid optionally" * tag 'vfs-6.13.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: pidfd: add ioctl to retrieve pid info
2024-11-18Merge tag 'vfs-6.13.ovl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull overlayfs updates from Christian Brauner: "Make overlayfs support specifying layers through file descriptors. Currently overlayfs only allows specifying layers through path names. This is inconvenient for users that want to assemble an overlayfs mount purely based on file descriptors: This enables user to specify both: fsconfig(fd_overlay, FSCONFIG_SET_FD, "upperdir+", NULL, fd_upper); fsconfig(fd_overlay, FSCONFIG_SET_FD, "workdir+", NULL, fd_work); fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower1); fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower2); in addition to: fsconfig(fd_overlay, FSCONFIG_SET_STRING, "upperdir+", "/upper", 0); fsconfig(fd_overlay, FSCONFIG_SET_STRING, "workdir+", "/work", 0); fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower1", 0); fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower2", 0); There's also a large set of new overlayfs selftests to test new features and some older properties" * tag 'vfs-6.13.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: selftests: add test for specifying 500 lower layers selftests: add overlayfs fd mounting selftests selftests: use shared header Documentation,ovl: document new file descriptor based layers ovl: specify layers via file descriptors fs: add helper to use mount option as path or fd
2024-11-18Merge tag 'vfs-6.13.file' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs file updates from Christian Brauner: "This contains changes the changes for files for this cycle: - Introduce a new reference counting mechanism for files. As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop it has O(N^2) behaviour under contention with N concurrent operations and it is in a hot path in __fget_files_rcu(). The rcuref infrastructures remedies this problem by using an unconditional increment relying on safe- and dead zones to make this work and requiring rcu protection for the data structure in question. This not just scales better it also introduces overflow protection. However, in contrast to generic rcuref, files require a memory barrier and thus cannot rely on *_relaxed() atomic operations and also require to be built on atomic_long_t as having massive amounts of reference isn't unheard of even if it is just an attack. This adds a file specific variant instead of making this a generic library. This has been tested by various people and it gives consistent improvement up to 3-5% on workloads with loads of threads. - Add a fastpath for find_next_zero_bit(). Skip 2-levels searching via find_next_zero_bit() when there is a free slot in the word that contains the next fd. This improves pts/blogbench-1.1.0 read by 8% and write by 4% on Intel ICX 160. - Conditionally clear full_fds_bits since it's very likely that a bit in full_fds_bits has been cleared during __clear_open_fds(). This improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on Intel ICX 160. - Get rid of all lookup_*_fdget_rcu() variants. They were used to lookup files without taking a reference count. That became invalid once files were switched to SLAB_TYPESAFE_BY_RCU and now we're always taking a reference count. Switch to an already existing helper and remove the legacy variants. - Remove pointless includes of <linux/fdtable.h>. - Avoid cmpxchg() in close_files() as nobody else has a reference to the files_struct at that point. - Move close_range() into fs/file.c and fold __close_range() into it. - Cleanup calling conventions of alloc_fdtable() and expand_files(). - Merge __{set,clear}_close_on_exec() into one. - Make __set_open_fd() set cloexec as well instead of doing it in two separate steps" * tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor fs: port files to file_ref fs: add file_ref expand_files(): simplify calling conventions make __set_open_fd() set cloexec state as well fs: protect backing files with rcu file.c: merge __{set,clear}_close_on_exec() alloc_fdtable(): change calling conventions. fs/file.c: add fast path in find_next_fd() fs/file.c: conditionally clear full_fds fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd() move close_range(2) into fs/file.c, fold __close_range() into it close_files(): don't bother with xchg() remove pointless includes of <linux/fdtable.h> get rid of ...lookup...fdget_rcu() family
2024-11-16Merge tag 'mm-hotfixes-stable-2024-11-16-15-33' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "10 hotfixes, 7 of which are cc:stable. All singletons, please see the changelogs for details" * tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: revert "mm: shmem: fix data-race in shmem_getattr()" ocfs2: uncache inode which has failed entering the group mm: fix NULL pointer dereference in alloc_pages_bulk_noprof mm, doc: update read_ahead_kb for MADV_HUGEPAGE fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args() sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32 mm/mremap: fix address wraparound in move_page_tables() tools/mm: fix compile error mm, swap: fix allocation and scanning race with swapoff
2024-11-14tools/mm: fix compile errorMotiejus JakÅ`tys
Add a missing semicolon. Link: https://lkml.kernel.org/r/20241112171655.1662670-1-motiejus@jakstys.lt Fixes: ece5897e5a10 ("tools/mm: -Werror fixes in page-types/slabinfo") Signed-off-by: Motiejus JakÅ`tys <motiejus@jakstys.lt> Closes: https://github.com/NixOS/nixpkgs/issues/355369 Reviewed-by: SeongJae Park <sj@kernel.org> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Wladislav Wiebe <wladislav.kw@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-11-14Merge tag 'net-6.12-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth. Quite calm week. No new regression under investigation. Current release - regressions: - eth: revert "igb: Disable threaded IRQ for igb_msix_other" Current release - new code bugs: - bluetooth: btintel: direct exception event to bluetooth stack Previous releases - regressions: - core: fix data-races around sk->sk_forward_alloc - netlink: terminate outstanding dump on socket close - mptcp: error out earlier on disconnect - vsock: fix accept_queue memory leak - phylink: ensure PHY momentary link-fails are handled - eth: mlx5: - fix null-ptr-deref in add rule err flow - lock FTE when checking if active - eth: dwmac-mediatek: fix inverted handling of mediatek,mac-wol Previous releases - always broken: - sched: fix u32's systematic failure to free IDR entries for hnodes. - sctp: fix possible UAF in sctp_v6_available() - eth: bonding: add ns target multicast address to slave device - eth: mlx5: fix msix vectors to respect platform limit - eth: icssg-prueth: fix 1 PPS sync" * tag 'net-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits) net: sched: u32: Add test case for systematic hnode IDR leaks selftests: bonding: add ns multicast group testing bonding: add ns target multicast address to slave device net: ti: icssg-prueth: Fix 1 PPS sync stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines net: Make copy_safe_from_sockptr() match documentation net: stmmac: dwmac-mediatek: Fix inverted handling of mediatek,mac-wol ipmr: Fix access to mfc_cache_list without lock held samples: pktgen: correct dev to DEV net: phylink: ensure PHY momentary link-fails are handled mptcp: pm: use _rcu variant under rcu_read_lock mptcp: hold pm lock when deleting entry mptcp: update local address flags when setting it net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes. MAINTAINERS: Re-add cancelled Renesas driver sections Revert "igb: Disable threaded IRQ for igb_msix_other" Bluetooth: btintel: Direct exception event to bluetooth stack Bluetooth: hci_core: Fix calling mgmt_device_connected virtio/vsock: Improve MSG_ZEROCOPY error handling vsock: Fix sk_error_queue memory leak ...
2024-11-14Merge branch 'for-next/pkey-signal' into for-next/coreCatalin Marinas
* for-next/pkey-signal: : Bring arm64 pkey signal delivery in line with the x86 behaviour selftests/mm: Fix unused function warning for aarch64_write_signal_pkey() selftests/mm: Define PKEY_UNRESTRICTED for pkey_sighandler_tests selftests/mm: Enable pkey_sighandler_tests on arm64 selftests/mm: Use generic pkey register manipulation arm64: signal: Remove unused macro arm64: signal: Remove unnecessary check when saving POE state arm64: signal: Improve POR_EL0 handling to avoid uaccess failures firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state() Revert "kasan: Disable Software Tag-Based KASAN with GCC" kasan: Fix Software Tag-Based KASAN with GCC kasan: Disable Software Tag-Based KASAN with GCC Documentation/protection-keys: add AArch64 to documentation arm64: set POR_EL0 for kernel threads # Conflicts: # arch/arm64/kernel/signal.c
2024-11-14Merge branches 'for-next/gcs', 'for-next/probes', 'for-next/asm-offsets', ↵Catalin Marinas
'for-next/tlb', 'for-next/misc', 'for-next/mte', 'for-next/sysreg', 'for-next/stacktrace', 'for-next/hwcap3', 'for-next/kselftest', 'for-next/crc32', 'for-next/guest-cca', 'for-next/haft' and 'for-next/scs', remote-tracking branch 'arm64/for-next/perf' into for-next/core * arm64/for-next/perf: perf: Switch back to struct platform_driver::remove() perf: arm_pmuv3: Add support for Samsung Mongoose PMU dt-bindings: arm: pmu: Add Samsung Mongoose core compatible perf/dwc_pcie: Fix typos in event names perf/dwc_pcie: Add support for Ampere SoCs ARM: pmuv3: Add missing write_pmuacr() perf/marvell: Marvell PEM performance monitor support perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control perf/dwc_pcie: Convert the events with mixed case to lowercase perf/cxlpmu: Support missing events in 3.1 spec perf: imx_perf: add support for i.MX91 platform dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible drivers perf: remove unused field pmu_node * for-next/gcs: (42 commits) : arm64 Guarded Control Stack user-space support kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c arm64/gcs: Fix outdated ptrace documentation kselftest/arm64: Ensure stable names for GCS stress test results kselftest/arm64: Validate that GCS push and write permissions work kselftest/arm64: Enable GCS for the FP stress tests kselftest/arm64: Add a GCS stress test kselftest/arm64: Add GCS signal tests kselftest/arm64: Add test coverage for GCS mode locking kselftest/arm64: Add a GCS test program built with the system libc kselftest/arm64: Add very basic GCS test program kselftest/arm64: Always run signals tests with GCS enabled kselftest/arm64: Allow signals tests to specify an expected si_code kselftest/arm64: Add framework support for GCS to signal handling tests kselftest/arm64: Add GCS as a detected feature in the signal tests kselftest/arm64: Verify the GCS hwcap arm64: Add Kconfig for Guarded Control Stack (GCS) arm64/ptrace: Expose GCS via ptrace and core files arm64/signal: Expose GCS state in signal frames arm64/signal: Set up and restore the GCS context for signal handlers arm64/mm: Implement map_shadow_stack() ... * for-next/probes: : Various arm64 uprobes/kprobes cleanups arm64: insn: Simulate nop instruction for better uprobe performance arm64: probes: Remove probe_opcode_t arm64: probes: Cleanup kprobes endianness conversions arm64: probes: Move kprobes-specific fields arm64: probes: Fix uprobes for big-endian kernels arm64: probes: Fix simulate_ldr*_literal() arm64: probes: Remove broken LDR (literal) uprobe support * for-next/asm-offsets: : arm64 asm-offsets.c cleanup (remove unused offsets) arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE arm64: asm-offsets: remove VM_EXEC and PAGE_SZ arm64: asm-offsets: remove MM_CONTEXT_ID arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET arm64: asm-offsets: remove VMA_VM_* arm64: asm-offsets: remove TSK_ACTIVE_MM * for-next/tlb: : TLB flushing optimisations arm64: optimize flush tlb kernel range arm64: tlbflush: add __flush_tlb_range_limit_excess() * for-next/misc: : Miscellaneous patches arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled arm64/ptrace: Clarify documentation of VL configuration via ptrace acpi/arm64: remove unnecessary cast arm64/mm: Change protval as 'pteval_t' in map_range() arm64: uprobes: Optimize cache flushes for xol slot acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block() arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings arm64/mm: Sanity check PTE address before runtime P4D/PUD folding arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont() ACPI: GTDT: Tighten the check for the array of platform timer structures arm64/fpsimd: Fix a typo arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers arm64: Return early when break handler is found on linked-list arm64/mm: Re-organize arch_make_huge_pte() arm64/mm: Drop _PROT_SECT_DEFAULT arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV arm64: head: Drop SWAPPER_TABLE_SHIFT arm64: cpufeature: add POE to cpucap_is_possible() arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t * for-next/mte: : Various MTE improvements selftests: arm64: add hugetlb mte tests hugetlb: arm64: add mte support * for-next/sysreg: : arm64 sysreg updates arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09 * for-next/stacktrace: : arm64 stacktrace improvements arm64: preserve pt_regs::stackframe during exec*() arm64: stacktrace: unwind exception boundaries arm64: stacktrace: split unwind_consume_stack() arm64: stacktrace: report recovered PCs arm64: stacktrace: report source of unwind data arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk() arm64: use a common struct frame_record arm64: pt_regs: swap 'unused' and 'pmr' fields arm64: pt_regs: rename "pmr_save" -> "pmr" arm64: pt_regs: remove stale big-endian layout arm64: pt_regs: assert pt_regs is a multiple of 16 bytes * for-next/hwcap3: : Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4) arm64: Support AT_HWCAP3 binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4 * for-next/kselftest: (30 commits) : arm64 kselftest fixes/cleanups kselftest/arm64: Try harder to generate different keys during PAC tests kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all() kselftest/arm64: Corrupt P0 in the irritator when testing SSVE kselftest/arm64: Add FPMR coverage to fp-ptrace kselftest/arm64: Expand the set of ZA writes fp-ptrace does kselftets/arm64: Use flag bits for features in fp-ptrace assembler code kselftest/arm64: Enable build of PAC tests with LLVM=1 kselftest/arm64: Check that SVCR is 0 in signal handlers kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests kselftest/arm64: Fix build with stricter assemblers kselftest/arm64: Test signal handler state modification in fp-stress kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test kselftest/arm64: Implement irritators for ZA and ZT kselftest/arm64: Remove unused ADRs from irritator handlers kselftest/arm64: Correct misleading comments on fp-stress irritators kselftest/arm64: Poll less often while waiting for fp-stress children kselftest/arm64: Increase frequency of signal delivery in fp-stress kselftest/arm64: Fix encoding for SVE B16B16 test ... * for-next/crc32: : Optimise CRC32 using PMULL instructions arm64/crc32: Implement 4-way interleave using PMULL arm64/crc32: Reorganize bit/byte ordering macros arm64/lib: Handle CRC-32 alternative in C code * for-next/guest-cca: : Support for running Linux as a guest in Arm CCA arm64: Document Arm Confidential Compute virt: arm-cca-guest: TSM_REPORT support for realms arm64: Enable memory encrypt for Realms arm64: mm: Avoid TLBI when marking pages as valid arm64: Enforce bounce buffers for realm DMA efi: arm64: Map Device with Prot Shared arm64: rsi: Map unprotected MMIO as decrypted arm64: rsi: Add support for checking whether an MMIO is protected arm64: realm: Query IPA size from the RMM arm64: Detect if in a realm and set RIPAS RAM arm64: rsi: Add RSI definitions * for-next/haft: : Support for arm64 FEAT_HAFT arm64: pgtable: Warn unexpected pmdp_test_and_clear_young() arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG arm64: Add support for FEAT_HAFT arm64: setup: name 'tcr2' register arm64/sysreg: Update ID_AA64MMFR1_EL1 register * for-next/scs: : Dynamic shadow call stack fixes arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux() arm64/scs: Deal with 64-bit relative offsets in FDE frames arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
2024-11-14net: sched: u32: Add test case for systematic hnode IDR leaksAlexandre Ferrieux
Add a tdc test case to exercise the just-fixed systematic leak of IDR entries in u32 hnode disposal. Given the IDR in question is confined to the range [1..0x7FF], it is sufficient to create/delete the same filter 2048 times to fill it up and get a nonzero exit status from "tc filter add". Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20241113100428.360460-1-alexandre.ferrieux@orange.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-14selftests: bonding: add ns multicast group testingHangbin Liu
Add a test to make sure the backup slaves join correct multicast group when arp_validate enabled and ns_ip6_target is set. Here is the result: TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [ OK ] TEST: arp_validate (join mcast group) [ OK ] Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-13Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfLinus Torvalds
Pull bpf fixes from Daniel Borkmann: - Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye) - Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS context retrieval (Zijian Zhang) - Fix BPF bits iterator selftest for s390x (Hou Tao) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6 bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx selftests/bpf: Use -4095 as the bad address for bits iterator
2024-11-13Merge tag 'mm-hotfixes-stable-2024-11-12-16-39' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "10 hotfixes, 7 of which are cc:stable. 7 are MM, 3 are not. All singletons" * tag 'mm-hotfixes-stable-2024-11-12-16-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: swapfile: fix cluster reclaim work crash on rotational devices selftests: hugetlb_dio: fixup check for initial conditions to skip in the start mm/thp: fix deferred split queue not partially_mapped: fix mm/gup: avoid an unnecessary allocation call for FOLL_LONGTERM cases nommu: pass NULL argument to vma_iter_prealloc() ocfs2: fix UBSAN warning in ocfs2_verify_volume() nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint mm: page_alloc: move mlocked flag clearance into free_pages_prepare() mm: count zeromap read and set for swapout and swapin
2024-11-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "x86 and selftests fixes. x86: - When emulating a guest TLB flush for a nested guest, flush vpid01, not vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if L2 and L1 are sharing VPID '0' (from L1's perspective). - Fix a bug in the SNP initialization flow where KVM would return '0' to userspace instead of -errno on failure. - Move the Intel PT virtualization (i.e. outputting host trace to host buffer and guest trace to guest buffer) behind CONFIG_BROKEN. - Fix memory leak on failure of KVM_SEV_SNP_LAUNCH_START - Fix a bug where KVM fails to inject an interrupt from the IRR after KVM_SET_LAPIC. Selftests: - Increase the timeout for the memslot performance selftest to avoid false failures on arm64 and nested x86 platforms. - Fix a goof in the guest_memfd selftest where a for-loop initialized a bit mask to zero instead of BIT(0). - Disable strict aliasing when building KVM selftests to prevent the compiler from treating things like "u64 *" to "uint64_t *" cases as undefined behavior, which can lead to nasty, hard to debug failures. - Force -march=x86-64-v2 for KVM x86 selftests if and only if the uarch is supported by the compiler. - Fix broken compilation of kvm selftests after a header sync in tools/" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN KVM: x86: Unconditionally set irr_pending when updating APICv state kvm: svm: Fix gctx page leak on invalid inputs KVM: selftests: use X86_MEMTYPE_WB instead of VMX_BASIC_MEM_TYPE_WB KVM: SVM: Propagate error from snp_guest_req_init() to userspace KVM: nVMX: Treat vpid01 as current if L2 is active, but with VPID disabled KVM: selftests: Don't force -march=x86-64-v2 if it's unsupported KVM: selftests: Disable strict aliasing KVM: selftests: fix unintentional noop test in guest_memfd_test.c KVM: selftests: memslot_perf_test: increase guest sync timeout
2024-11-12selftests: hugetlb_dio: fixup check for initial conditions to skip in the startDonet Tom
This test verifies that a hugepage, used as a user buffer for DIO operations, is correctly freed upon unmapping. To test this, we read the count of free hugepages before and after the mmap, DIO, and munmap operations, then check if the free hugepage count is the same. Reading free hugepages before the test was removed by commit 0268d4579901 ('selftests: hugetlb_dio: check for initial conditions to skip at the start'), causing the test to always fail. This patch adds back reading the free hugepages before starting the test. With this patch, the tests are now passing. Test results without this patch: ./tools/testing/selftests/mm/hugetlb_dio TAP version 13 1..4 # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 1 : Huge pages not freed! # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 2 : Huge pages not freed! # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 3 : Huge pages not freed! # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 4 : Huge pages not freed! # Totals: pass:0 fail:4 xfail:0 xpass:0 skip:0 error:0 Test results with this patch: /tools/testing/selftests/mm/hugetlb_dio TAP version 13 1..4 # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 1 : Huge pages freed successfully ! # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 2 : Huge pages freed successfully ! # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 3 : Huge pages freed successfully ! # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 4 : Huge pages freed successfully ! # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0 Link: https://lkml.kernel.org/r/20241110064903.23626-1-donettom@linux.ibm.com Fixes: 0268d4579901 ("selftests: hugetlb_dio: check for initial conditions to skip in the start") Signed-off-by: Donet Tom <donettom@linux.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-11-12kselftest/arm64: Try harder to generate different keys during PAC testsMark Brown
We very intermittently see failures in the single_thread_different_keys PAC test. As noted in the comment in the test the PAC field can be quite narrow so there is a chance of collisions even with different keys with a chance of 5% for 7 bit keys, and the potential for narrower keys. The test tries to avoid this by running repeatedly, but only tries 10 times which even with a 5% chance of collisions isn't enough. Increase the number of times we attempt to look for collisions by a factor of 100, this also affects other tests which are following a similar pattern with running the test repeatedly and either don't care like with pac_instruction_not_nop or potentially have the same issue like exec_sign_all. The PAC tests are very fast, running in a second or two even in emulation, so the 100x increased cost is mildly irritating but not a huge issue. The bulk of the overhead is in the exec_sign_all test which does a fork() and exec() per iteration. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241111-arm64-pac-test-collisions-v1-2-171875f37e44@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-12kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()Mark Brown
The PAC exec_sign_all() test spawns some child processes, creating pipes to be stdin and stdout for the child. It cleans up most of the file descriptors that are created as part of this but neglects to clean up the parent end of the child stdin and stdout. Add the missing close() calls. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241111-arm64-pac-test-collisions-v1-1-171875f37e44@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-12kselftest/arm64: Corrupt P0 in the irritator when testing SSVEMark Brown
When building for streaming SVE the irritator for SVE skips updates of both P0 and FFR. While FFR is skipped since it might not be present there is no reason to skip corrupting P0 so switch to an instruction valid in streaming mode and move the ifdef. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-3-c4b9622e36ee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-12kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.cCatalin Marinas
Compiling the child_cleanup() function results in: gcs-stress.c: In function ‘child_cleanup’: gcs-stress.c:266:75: warning: format ‘%d’ expects a matching ‘int’ argument [-Wformat=] 266 | ksft_print_msg("%s: Exited due to signal %d\n", | ~^ | | | int Add the missing child->exit_signal argument. Fixes: 05e6cfff58c4 ("kselftest/arm64: Add a GCS stress test") Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-12kselftest/arm64: Add FPMR coverage to fp-ptraceMark Brown
Add coverage for FPMR to fp-ptrace. FPMR can be available independently of SVE and SME, if SME is supported then FPMR is cleared by entering and exiting streaming mode. As with other registers we generate random values to load into the register, we restrict these to bitfields which are always defined. We also leave bitfields where the valid values are affected by the set of supported FP8 formats zero to reduce complexity, it is unlikely that specific bitfields will be affected by ptrace issues. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-3-250b57c61254@kernel.org [catalin.marinas@arm.com: use REG_FPMR instead of FPMR] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-12kselftest/arm64: Expand the set of ZA writes fp-ptrace doesMark Brown
Currently our test for implementable ZA writes is written in a bit of a convoluted fashion which excludes all changes where we clear SVCR.SM even though we can actually support that since changing the vector length resets SVCR. Make the logic more direct, enabling us to actually run these cases. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-2-250b57c61254@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-12kselftets/arm64: Use flag bits for features in fp-ptrace assembler codeMark Brown
The assembler portions of fp-ptrace are passed feature flags by the C code indicating which architectural features are supported. Currently these use an entire register for each flag which is wasteful and gets cumbersome as new flags are added. Switch to using flag bits in a single register to make things easier to maintain. No functional change. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-1-250b57c61254@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-12kselftest/arm64: Enable build of PAC tests with LLVM=1Mark Brown
Currently we don't build the PAC selftests when building with LLVM=1 since we attempt to test for PAC support in the toolchain before we've set up the build system to point at LLVM in lib.mk, which has to be one of the last things in the Makefile. Since all versions of LLVM supported for use with the kernel have PAC support we can just sidestep the issue by just assuming PAC is there when doing a LLVM=1 build. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241111-arm64-selftest-pac-clang-v1-1-08599ceee418@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-12kselftest/arm64: Check that SVCR is 0 in signal handlersMark Brown
We don't currently validate that we exit streaming mode and clear ZA when we enter a signal handler. Add simple checks for this in the SSVE and ZA tests. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241106-arm64-fpmr-signal-test-v1-1-31fa34ce58fe@kernel.org [catalin.marinas@arm.com: Use %lx in fprintf() as uint64_t seems to be unsigned long in glibc] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-11selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()Catalin Marinas
Since commit 49f59573e9e0 ("selftests/mm: Enable pkey_sighandler_tests on arm64"), pkey_sighandler_tests.c (which includes pkey-arm64.h via pkey-helpers.h) ends up compiled for arm64. Since it doesn't use aarch64_write_signal_pkey(), the compiler warns: In file included from pkey-helpers.h:106, from pkey_sighandler_tests.c:31: pkey-arm64.h:130:13: warning: ‘aarch64_write_signal_pkey’ defined but not used [-Wunused-function] 130 | static void aarch64_write_signal_pkey(ucontext_t *uctxt, u64 pkey) | ^~~~~~~~~~~~~~~~~~~~~~~~~ Make the aarch64_write_signal_pkey() a 'static inline void' function to avoid the compiler warning. Fixes: f5b5ea51f78f ("selftests: mm: make protection_keys test work on arm64") Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Joey Gouly <joey.gouly@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Link: https://lore.kernel.org/r/20241108110549.1185923-1-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-11kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c testsCatalin Marinas
Fix the incorrect length modifiers in arm64/abi/syscall-abi.c. Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241108134920.1233992-4-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-11kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() testCatalin Marinas
While prctl() returns an 'int', the PR_MTE_TCF_MASK is defined as unsigned long which results in the larger type following a bitwise 'and' operation. Cast the printf() argument to 'int'. Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241108134920.1233992-3-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-11kselftest/arm64: Fix printf() compiler warnings in the arm64 fp testsCatalin Marinas
Lots of incorrect length modifiers, missing arguments or conversion specifiers. Fix them. Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241108134920.1233992-2-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-11kselftest/arm64: Fix build with stricter assemblersMark Brown
While some assemblers (including the LLVM assembler I mostly use) will happily accept SMSTART as an instruction by default others, specifically gas, require that any architecture extensions be explicitly enabled. The assembler SME test programs use manually encoded helpers for the new instructions but no SMSTART helper is defined, only SM and ZA specific variants. Unfortunately the irritators that were just added use plain SMSTART so on stricter assemblers these fail to build: za-test.S:160: Error: selected processor does not support `smstart' Switch to using SMSTART ZA via the manually encoded smstart_za macro we already have defined. Fixes: d65f27d240bb ("kselftest/arm64: Implement irritators for ZA and ZT") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241108-arm64-selftest-asm-error-v1-1-7ce27b42a677@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-11Merge tag 'sched_ext-for-6.12-rc7-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fixes from Tejun Heo: - The fair sched class currently has a bug where its balance() returns true telling the sched core that it has tasks to run but then NULL from pick_task(). This makes sched core call sched_ext's pick_task() without preceding balance() which can lead to stalls in partial mode. For now, work around by detecting the condition and forcing the CPU to go through another scheduling cycle. - Add a missing newline to an error message and fix drgn introspection tool which went out of sync. * tag 'sched_ext-for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx() sched_ext: Update scx_show_state.py to match scx_ops_bypass_depth's new type sched_ext: Add a missing newline at the end of an error message
2024-11-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Several small bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Fix error path during device add vp_vdpa: fix id_table array not null terminated error virtio_pci: Fix admin vq cleanup by using correct info pointer vDPA/ifcvf: Fix pci_read_config_byte() return code handling Fix typo in vringh_test.c vdpa: solidrun: Fix UB bug with devres vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
2024-11-10Merge tag 'mm-hotfixes-stable-2024-11-09-22-40' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "20 hotfixes, 14 of which are cc:stable. Three affect DAMON. Lorenzo's five-patch series to address the mmap_region error handling is here also. Apart from that, various singletons" * tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: add entry for Thorsten Blum ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove() signal: restore the override_rlimit logic fs/proc: fix compile warning about variable 'vmcore_mmap_ops' ucounts: fix counter leak in inc_rlimit_get_ucounts() selftests: hugetlb_dio: check for initial conditions to skip in the start mm: fix docs for the kernel parameter ``thp_anon=`` mm/damon/core: avoid overflow in damon_feed_loop_next_input() mm/damon/core: handle zero schemes apply interval mm/damon/core: handle zero {aggregation,ops_update} intervals mm/mlock: set the correct prev on failure objpool: fix to make percpu slot allocation more robust mm/page_alloc: keep track of free highatomic mm: resolve faulty mmap_region() error path behaviour mm: refactor arch_calc_vm_flag_bits() and arm64 MTE handling mm: refactor map_deny_write_exec() mm: unconditionally close VMAs on error mm: avoid unsafe VMA hook invocation when error arises on mmap hook mm/thp: fix deferred split unqueue naming and locking mm/thp: fix deferred split queue not partially_mapped
2024-11-09selftests: net: add netlink-dumps to .gitignoreJakub Kicinski
Commit 55d42a0c3f9c ("selftests: net: add a test for closing a netlink socket ith dump in progress") added a new test but did not add it to gitignore. Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20241108004731.2979878-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-08Merge tag 'thermal-6.12-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix one issue in the qcom lmh thermal driver, a DT handling issue in the thermal core and two issues in the userspace thermal library: - Allow tripless thermal zones defined in a DT to be registered in accordance with the thermal DT bindings (Icenowy Zheng) - Annotate LMH IRQs with lockdep classes to prevent lockdep from reporting a possible recursive locking issue that cannot really occur (Dmitry Baryshkov) - Improve the thermal library "make clean" to remove a leftover symbolic link created during compilation and fix the sampling handler invocation in that library to pass the correct pointer to it (Emil Dahl Juhl, zhang jiao)" * tag 'thermal-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/of: support thermal zones w/o trips subnode tools/lib/thermal: Remove the thermal.h soft link when doing make clean tools/lib/thermal: Fix sampling handler context ptr thermal/drivers/qcom/lmh: Remove false lockdep backtrace
2024-11-08KVM: selftests: use X86_MEMTYPE_WB instead of VMX_BASIC_MEM_TYPE_WBJohn Sperbeck
In 08a7d2525511 ("tools arch x86: Sync the msr-index.h copy with the kernel sources"), VMX_BASIC_MEM_TYPE_WB was removed. Use X86_MEMTYPE_WB instead. Fixes: 08a7d2525511 ("tools arch x86: Sync the msr-index.h copy with the kernel sources") Signed-off-by: John Sperbeck <jsperbeck@google.com> Message-ID: <20241106034031.503291-1-jsperbeck@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-11-08Merge tag 'kvm-x86-fixes-6.12-rcN' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM x86 and selftests fixes for 6.12: - Increase the timeout for the memslot performance selftest to avoid false failures on arm64 and nested x86 platforms. - Fix a goof in the guest_memfd selftest where a for-loop initialized a bit mask to zero instead of BIT(0). - Disable strict aliasing when building KVM selftests to prevent the compiler from treating things like "u64 *" to "uint64_t *" cases as undefined behavior, which can lead to nasty, hard to debug failures. - Force -march=x86-64-v2 for KVM x86 selftests if and only if the uarch is supported by the compiler. - When emulating a guest TLB flush for a nested guest, flush vpid01, not vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if L2 and L1 are sharing VPID '0' (from L1's perspective). - Fix a bug in the SNP initialization flow where KVM would return '0' to userspace instead of -errno on failure.
2024-11-07selftests: hugetlb_dio: check for initial conditions to skip in the startMuhammad Usama Anjum
The test should be skipped if initial conditions aren't fulfilled in the start instead of failing and outputting non-compliant TAP logs. This kind of failure pollutes the results. The initial conditions are: - The test should only execute if /tmp file can be allocated. - The test should only execute if huge pages are free. Before: TAP version 13 1..4 Bail out! Error opening file : Read-only file system (30) # Planned tests != run tests (4 != 0) # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 After: TAP version 13 1..0 # SKIP Unable to allocate file: Read-only file system Link: https://lkml.kernel.org/r/20241101141557.3159432-1-usama.anjum@collabora.com Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Fixes: 3a103b5315b7 ("selftest: mm: Test if hugepage does not get leaked during __bio_release_pages()") Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Donet Tom <donettom@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-11-07selftests/mm: Define PKEY_UNRESTRICTED for pkey_sighandler_testsKevin Brodsky
Commit 6e182dc9f268 ("selftests/mm: Use generic pkey register manipulation") makes use of PKEY_UNRESTRICTED in pkey_sighandler_tests. The macro has been proposed for addition to uapi headers [1], but the patch hasn't landed yet. Define PKEY_UNRESTRICTED in pkey-helpers.h for the time being to fix the build. [1] https://lore.kernel.org/all/20241028090715.509527-2-yury.khrustalev@arm.com/ Fixes: 6e182dc9f268 ("selftests/mm: Use generic pkey register manipulation") Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com> Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Link: https://lore.kernel.org/r/20241107131640.650703-1-kevin.brodsky@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-07selftests: net: add a test for closing a netlink socket ith dump in progressJakub Kicinski
Close a socket with dump in progress. We need a dump which generates enough info not to fit into a single skb. Policy dump fits the bill. Use the trick discovered by syzbot for keeping a ref on the socket longer than just close, with mqueue. TAP version 13 1..3 # Starting 3 tests from 1 test cases. # RUN global.test_sanity ... # OK global.test_sanity ok 1 global.test_sanity # RUN global.close_in_progress ... # OK global.close_in_progress ok 2 global.close_in_progress # RUN global.close_with_ref ... # OK global.close_with_ref ok 3 global.close_with_ref # PASSED: 3 / 3 tests passed. # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Note that this test is not expected to fail but rather crash the kernel if we get the cleanup wrong. Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241106015235.2458807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07kselftest/arm64: Test signal handler state modification in fp-stressMark Brown
Currently in fp-stress we test signal delivery to the test threads by sending SIGUSR2 which simply counts how many signals are delivered. The test programs now also all have a SIGUSR1 handler which for the threads doing userspace testing additionally modifies the floating point register state in the signal handler, verifying that when we return the saved register state is restored from the signal context as expected. Switch over to triggering that to validate that we are restoring as expected. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-6-c4b9622e36ee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-07kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress testMark Brown
The other stress test programs provide a SIGUSR1 handler which modifies the live register state in order to validate that signal context is being restored during signal return. While we can't usefully do this when testing kernel mode FP usage provide a handler for SIGUSR1 which just counts the number of signals like we do for SIGUSR2, allowing fp-stress to treat all the test programs uniformly. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-5-c4b9622e36ee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-07kselftest/arm64: Implement irritators for ZA and ZTMark Brown
Currently we don't use the irritator signal in our floating point stress tests so when we added ZA and ZT stress tests we didn't actually bother implementing any actual action in the handlers, we just counted the signal deliveries. In preparation for using the irritators let's implement them, just trivially SMSTOP and SMSTART to reset all bits in the register to 0. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-4-c4b9622e36ee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-07kselftest/arm64: Remove unused ADRs from irritator handlersMark Brown
The irritator handlers for the fp-stress test programs all use ADR to load an address into x0 which is then not referenced. Remove these ADRs as they just cause confusion. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-2-c4b9622e36ee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-07kselftest/arm64: Correct misleading comments on fp-stress irritatorsMark Brown
The comments in the handlers for the irritator signal in the test threads for fp-stress suggest that the irritator will corrupt the register state observed by the main thread but this is not the case, instead the FPSIMD and SVE irritators (which are the only ones that are implemented) modify the current register state which is expected to be overwritten on return from the handler by the saved register state. Update the comment to reflect what the handler is actually doing. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-1-c4b9622e36ee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-07kselftest/arm64: Poll less often while waiting for fp-stress childrenMark Brown
While fp-stress is waiting for children to start it doesn't send any signals to them so there is no need for it to have as short an epoll() timeout as it does when the children are all running. We do still want to have some timeout so that we can log diagnostics about missing children but this can be relatively large. On emulated platforms the overhead of running the supervisor process is quite high, especially during the process of execing the test binaries. Implement a longer epoll() timeout during the setup phase, using a 5s timeout while waiting for children and switching to the signal raise interval when all the children are started and we start sending signals. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-2-bd3cef48c22c@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-07kselftest/arm64: Increase frequency of signal delivery in fp-stressMark Brown
Currently we only deliver signals to the processes being tested about once a second, meaning that the signal code paths are subject to relatively little stress. Increase this frequency substantially to 25ms intervals, along with some minor refactoring to make this more readily tuneable and maintain the 1s logging interval. This interval was chosen based on some experimentation with emulated platforms to avoid causing so much extra load that the test starts to run into the 45s limit for selftests or generally completely disconnect the timeout numbers from the We could increase this if we moved the signal generation out of the main supervisor thread, though we should also consider that he percentage of time that we spend interacting with the floating point state is also a consideration. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-1-bd3cef48c22c@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-06Merge tag 'tracefs-v6.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracefs fixes from Steven Rostedt: "Fix tracefs mount options. Commit 78ff64081949 ("vfs: Convert tracefs to use the new mount API") broke the gid setting when set by fstab or other mount utility. It is ignored when it is set. Fix the code so that it recognises the option again and will honor the settings on mount at boot up. Update the internal documentation and create a selftest to make sure it doesn't break again in the future" * tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/selftests: Add tracefs mount options test tracing: Document tracefs gid mount option tracing: Fix tracefs mount options
2024-11-06Fix typo in vringh_test.cShivam Chaudhary
Corrected minor typo in tools/virtio/vringh_test.c: - Fixed "retreives" to "retrieves" Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com> Message-Id: <20241008145204.478749-1-cvam0000@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-11-05selftests/bpf: Use -4095 as the bad address for bits iteratorHou Tao
As reported by Byeonguk, the bad_words test in verifier_bits_iter.c occasionally fails on s390 host. Quoting Ilya's explanation: s390 kernel runs in a completely separate address space, there is no user/kernel split at TASK_SIZE. The same address may be valid in both the kernel and the user address spaces, there is no way to tell by looking at it. The config option related to this property is ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE. Also, unfortunately, 0 is a valid address in the s390 kernel address space. Fix the issue by using -4095 as the bad address for bits iterator, as suggested by Ilya. Verify that bpf_iter_bits_new() returns -EINVAL for NULL address and -EFAULT for bad address. Fixes: ebafc1e535db ("selftests/bpf: Add three test cases for bits_iter") Reported-by: Byeonguk Jeong <jungbu2855@gmail.com> Closes: https://lore.kernel.org/bpf/ZycSXwjH4UTvx-Cn@ub22/ Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20241105043057.3371482-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-11-05sched_ext: Update scx_show_state.py to match scx_ops_bypass_depth's new typeTejun Heo
0e7ffff1b811 ("scx: Fix raciness in scx_ops_bypass()") converted scx_ops_bypass_depth from an atomic to an int. Update scx_show_state.py accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 0e7ffff1b811 ("scx: Fix raciness in scx_ops_bypass()")
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 16:03:57 +0000