| Age | Commit message (Collapse) | Author |
|---|
|
Convert the printf() self-test to a KUnit test.
In the interest of keeping the patch reasonably-sized this doesn't
refactor the tests into proper parameterized tests - it's all one big
test case.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250307-printf-kunit-convert-v6-1-4d85c361c241@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Missing initialization of cpu and jiffies32 fields in conncount,
from Kohei Enju.
2) Skip several tests in case kernel is tainted, otherwise tests bogusly
report failure too as they also check for tainted kernel,
from Florian Westphal.
3) Fix a hyphothetical integer overflow in do_ip_vs_get_ctl() leading
to bogus error logs, from Dan Carpenter.
4) Fix incorrect offset in ipv4 option match in nft_exthdr, from
Alexey Kashavkin.
netfilter pull request 25-03-13
* tag 'nf-25-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_exthdr: fix offset with ipv4_find_option()
ipvs: prevent integer overflow in do_ip_vs_get_ctl()
selftests: netfilter: skip br_netfilter queue tests if kernel is tainted
netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()
====================
Link: https://patch.msgid.link/20250313095636.2186-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
GRE devices have their special code for IPv6 link-local address
generation that has been the source of several regressions in the past.
Add selftest to check that all gre, ip6gre, gretap and ip6gretap get an
IPv6 link-link local address in accordance with the
net.ipv6.conf.<dev>.addr_gen_mode sysctl.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/2d6772af8e1da9016b2180ec3f8d9ee99f470c77.1741375285.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The objtool program need to analysis the control flow of each object file
generated by compiler toolchain, it needs to know all the locations that
a branch instruction may jump into, if a jump table is used, objtool has
to correlate the jump instruction with the table.
On x86 (which is the only port supported by objtool before LoongArch),
there is a relocation type on the jump instruction and directly points
to the table. But on LoongArch, the relocation is on another kind of
instruction prior to the jump instruction, and also with scheduling it
is not very easy to tell the offset of that instruction from the jump
instruction. Furthermore, because LoongArch has -fsection-anchors (often
enabled at -O1 or above) the relocation may actually points to a section
anchor instead of the table itself.
For the jump table of switch cases, a GCC patch "LoongArch: Add support
to annotate tablejump" and a Clang patch "[LoongArch] Add options for
annotate tablejump" have been merged into the upstream mainline, it can
parse the additional section ".discard.tablejump_annotate" which stores
the jump info as pairs of addresses, each pair contains the address of
jump instruction and the address of jump table.
For the jump table of computed gotos, it is indeed not easy to implement
in the compiler, especially if there is more than one computed goto in a
function such as ___bpf_prog_run(). objdump kernel/bpf/core.o shows that
there are many table jump instructions in ___bpf_prog_run(), but there are
no relocations on the table jump instructions and to the table directly on
LoongArch.
Without the help of compiler, in order to figure out the address of goto
table for the special case of ___bpf_prog_run(), since the instruction
sequence is relatively single and stable, it makes sense to add a helper
find_reloc_of_rodata_c_jump_table() to find the relocation which points
to the section ".rodata..c_jump_table".
If find_reloc_by_table_annotate() failed, it means there is no relocation
info of switch table address in ".rela.discard.tablejump_annotate", then
objtool may find the relocation info of goto table ".rodata..c_jump_table"
with find_reloc_of_rodata_c_jump_table().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-6-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The objtool program need to analysis the control flow of each object file
generated by compiler toolchain, it needs to know all the locations that
a branch instruction may jump into, if a jump table is used, objtool has
to correlate the jump instruction with the table.
On x86 (which is the only port supported by objtool before LoongArch),
there is a relocation type on the jump instruction and directly points
to the table. But on LoongArch, the relocation is on another kind of
instruction prior to the jump instruction, and also with scheduling it
is not very easy to tell the offset of that instruction from the jump
instruction. Furthermore, because LoongArch has -fsection-anchors (often
enabled at -O1 or above) the relocation may actually points to a section
anchor instead of the table itself.
The good news is that after continuous analysis and discussion, at last
a GCC patch "LoongArch: Add support to annotate tablejump" and a Clang
patch "[LoongArch] Add options for annotate tablejump" have been merged
into the upstream mainline, the compiler changes make life much easier
for switch table support of objtool on LoongArch.
By now, there is an additional section ".discard.tablejump_annotate" to
store the jump info as pairs of addresses, each pair contains the address
of jump instruction and the address of jump table.
In order to find switch table, it is easy to parse the relocation section
".rela.discard.tablejump_annotate" to get table_sec and table_offset, the
rest process is somehow like x86.
Additionally, it needs to get each table size. When compiling on LoongArch,
there are unsorted table offsets of rodata if there exist many jump tables,
it will get the wrong table end and find the wrong table jump destination
instructions in add_jump_table().
Sort the rodata table offset by parsing ".rela.discard.tablejump_annotate"
and then get each table size of rodata corresponded with each table jump
instruction, it is used to check the table end and will break the process
when parsing ".rela.rodata" to avoid getting the wrong jump destination
instructions.
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=0ee028f55640
Link: https://github.com/llvm/llvm-project/commit/4c2c17756739
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-5-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
For the most part, an absolute relocation type is used for rodata.
In the case of STT_SECTION, reloc->sym->offset is always zero, for
the other symbol types, reloc_addend(reloc) is always zero, thus it
can use a simple statement "reloc->sym->offset + reloc_addend(reloc)"
to obtain the symbol offset for various symbol types.
When compiling on LoongArch, there exist PC relative relocation types
for rodata, it needs to calculate the symbol offset with "S + A - PC"
according to the spec of "ELF for the LoongArch Architecture".
If there is only one jump table in the rodata, the "PC" is the entry
address which is equal with the value of reloc_offset(reloc), at this
time, reloc_offset(table) is 0.
If there are many jump tables in the rodata, the "PC" is the offset
of the jump table's base address which is equal with the value of
reloc_offset(reloc) - reloc_offset(table).
So for LoongArch, if the relocation type is PC relative, it can use a
statement "reloc_offset(reloc) - reloc_offset(table)" to get the "PC"
value when calculating the symbol offset with "S + A - PC" for one or
many jump tables in the rodata.
Add an arch-specific function arch_jump_table_sym_offset() to assign
the symbol offset, for the most part that is an absolute relocation,
the default value is "reloc->sym->offset + reloc_addend(reloc)" in
the weak definition, it can be overridden by each architecture that
has different requirements.
Link: https://github.com/loongson/la-abi-specs/blob/release/laelf.adoc
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-4-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In the most cases, the entry size of rodata is 8 bytes because the
relocation type is 64 bit. There are also 32 bit relocation types,
the entry size of rodata should be 4 bytes in this case.
Add an arch-specific function arch_reloc_size() to assign the entry
size of rodata for x86, powerpc and LoongArch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-3-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In the relocation section ".rela.rodata" of each .o file compiled with
LoongArch toolchain, there are various symbol types such as STT_NOTYPE,
STT_OBJECT, STT_FUNC in addition to the usual STT_SECTION, it needs to
use reloc symbol offset instead of reloc addend to find the destination
instruction in find_jump_table() and add_jump_table().
For the most part, an absolute relocation type is used for rodata. In the
case of STT_SECTION, reloc->sym->offset is always zero, and for the other
symbol types, reloc_addend(reloc) is always zero, thus it can use a simple
statement "reloc->sym->offset + reloc_addend(reloc)" to obtain the symbol
offset for various symbol types.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20250211115016.26913-2-yangtiezhu@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The check for using old libelf prints an error message when libelf.h is
not available but does not abort. This may confuse so hide the compiler
error message.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Link: https://lore.kernel.org/r/20250203073610.206000-1-david.engraf@sysgo.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Integrate the reproduer from Mingi to TDC.
All test results:
1..4
ok 1 0385 - Create DRR with default setting
ok 2 2375 - Delete DRR with handle
ok 3 3092 - Show DRR class
ok 4 4009 - Reject creation of DRR class with classid TC_H_ROOT
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306232355.93864-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These scripts fail if the kernel is tainted which leads to wrong test
failure reports in CI environments when an unrelated test triggers some
splat.
Check taint state at start of script and SKIP if its already dodgy.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Adding the aligned(1024) attribute to the definition of __rseq_abi did
not increase its size to 1024, for this attribute to impact the size of
__rseq_abi it would need to be added to the declaration of 'struct
rseq_abi'. We only want to increase the size of the TLS allocation to
ensure registration will succeed with future extended ABI. Use a union
with a dummy member to ensure we allocate 1024 bytes.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20250311192222.323453-1-mjeanson@efficios.com
|
|
The correct mac address for NS target 2001:db8::254 is 33:33:ff:00:02:54,
not 33:33:00:00:02:54. The same with client maddress.
Fixes: 86fb6173d11e ("selftests: bonding: add ns multicast group testing")
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306023923.38777-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Provide coverage for all mnt_notify_add() instances.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250307204046.322691-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ping.py has 3 cases, test_v4, test_v6 and test_tcp.
But these cases are not executed on the XDP environment.
So, it adds XDP environment, existing tests(test_v4, test_v6, and
test_tcp) are executed too on the below XDP environment.
So, it adds XDP cases.
1. xdp-generic + single-buffer
2. xdp-generic + multi-buffer
3. xdp-native + single-buffer
4. xdp-native + multi-buffer
5. xdp-offload
It also makes test_{v4 | v6 | tcp} sending large size packets. this may
help to check whether multi-buffer is working or not.
Note that the physical interface may be down and then up when xdp is
attached or detached.
This takes some period to activate traffic. So sleep(10) is
added if the test interface is the physical interface.
netdevsim and veth type interfaces skip sleep.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250309134219.91670-9-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
|
|
into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
|
|
The asm/ and asm-generic/ namespaces are implementation details of the UAPI
headers and not meant for direct usage.
Use the equivalent headers from the linux/ namespace instead.
While at it also drop the duplicate include of linux/signal.h from sys.h.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250307-nolibc-asm-headers-v2-1-e2a734f25d22@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390
by introducing a dedicated GNU hash bucket pointer with correct
32-bit entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
* tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ftrace: Fix return address recovery of traced function
selftests/vDSO: Fix GNU hash table entry size for s390x
s390/traps: Fix test_monitor_call() inline assembly
|
|
The execution order of constructors in undefined and depends on the
toolchain. While recent toolchains seems to have a stable order, it
doesn't work for older ones and may also change at any time.
Stop validating the order and instead only validate that all
constructors are executed.
Reported-by: Willy Tarreau <w@1wt.eu>
Closes: https://lore.kernel.org/lkml/20250301110735.GA18621@1wt.eu/
Link: https://lore.kernel.org/r/20250306-nolibc-constructor-order-v1-1-68fd161cc5ec@weissschuh.net
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This doesn't matter much, but is what the standard says.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-5-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This behaviour was changed in commit a7604ba149e7 ("tools/nolibc/sys:
make open() take a vararg on the 3rd argument").
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-4-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
openat() uses mode_t for this, so also update open() to be consistent.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-3-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
All architectures support openat, so we don't need to make its use
conditional.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-2-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
openat is useful to avoid needing to construct relative paths, so expose
a wrapper for using it directly.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-1-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
with min/max boundaries
damon_nr_regions.py starts DAMON, periodically collect number of regions
in snapshots, and see if it is in the requested range. The check code
assumes the numbers are sorted on the collection list, but there is no
such guarantee. Hence this can result in false positive test success.
Sort the list before doing the check.
Link: https://lkml.kernel.org/r/20250225222333.505646-4-sj@kernel.org
Fixes: 781497347d1b ("selftests/damon: implement test for min/max_nr_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
100ms
damon_nr_regions.py updates max_nr_regions to a number smaller than
expected number of real regions and confirms DAMON respect the harsh
limit. To give time for DAMON to make changes for the regions, 3
aggregation intervals (300 milliseconds) are given.
The internal mechanism works with not only the max_nr_regions, but also
sz_limit, though. It avoids merging region if that casn make region of
size larger than sz_limit. In the test, sz_limit is set too small to
achive the new max_nr_regions, unless it is updated for the new
min_nr_regions. But the update is done only once per operations set
update interval, which is one second by default.
Hence, the test randomly incurs false positive failures. Fix it by
setting the ops interval same to aggregation interval, to make sure
sz_limit is updated by the time of the check.
Link: https://lkml.kernel.org/r/20250225222333.505646-3-sj@kernel.org
Fixes: 8bf890c81612 ("selftests/damon/damon_nr_regions: test online-tuned max_nr_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: three fixes for false results".
Fix three DAMON selftest bugs that cause two and one false positive
failures and successes.
This patch (of 3):
damos_quota.py assumes the quota will always exceeded. But whether quota
will be exceeded or not depend on the monitoring results. Actually the
monitored workload has chaning access pattern and hence sometimes the
quota may not really be exceeded. As a result, false positive test
failures happen. Expect how much time the quota will be exceeded by
checking the monitoring results, and use it instead of the naive
assumption.
Link: https://lkml.kernel.org/r/20250225222333.505646-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250225222333.505646-2-sj@kernel.org
Fixes: 51f58c9da14b ("selftests/damon: add a test for DAMOS quota")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
further reduced
damos_quota_goal.py selftest see if DAMOS quota goals tuning feature
increases or reduces the effective size quota for given score as expected.
The tuning feature sets the minimum quota size as one byte, so if the
effective size quota is already one, we cannot expect it further be
reduced. However the test is not aware of the edge case, and fails since
it shown no expected change of the effective quota. Handle the case by
updating the failure logic for no change to see if it was the case, and
simply skips to next test input.
Link: https://lkml.kernel.org/r/20250217182304.45215-1-sj@kernel.org
Fixes: f1c07c0a1662 ("selftests/damon: add a test for DAMOS quota goal")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171423.b28a918d-lkp@intel.com
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org> [6.10.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit a5c6bc590094a1a73cf6fa3f505e1945d2bf2461.
The general approach described in commit e076eaca5906 ("selftests: break
the dependency upon local header files") was taken one step too far here:
it should not have been extended to include the syscall numbers. This is
because doing so would require per-arch support in tools/include/uapi, and
no such support exists.
This revert fixes two separate reports of test failures, from Dave
Hansen[1], and Li Wang[2]. An excerpt of Dave's report:
Before this commit (a5c6bc590094a1a73cf6fa3f505e1945d2bf2461) things are
fine. But after, I get:
running PKEY tests for unsupported CPU/OS
An excerpt of Li's report:
I just found that mlock2_() return a wrong value in mlock2-test
[1] https://lore.kernel.org/dc585017-6740-4cab-a536-b12b37a7582d@intel.com
[2] https://lore.kernel.org/CAEemH2eW=UMu9+turT2jRie7+6ewUazXmA6kL+VBo3cGDGU6RA@mail.gmail.com
Link: https://lkml.kernel.org/r/20250214033850.235171-1-jhubbard@nvidia.com
Fixes: a5c6bc590094 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Li Wang <liwang@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
"int" was misspelled as "init" the code comments in the bits.h and
const.h files. Fix the typo.
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Add a selftest for PIDFD_INFO_EXIT behavior.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-16-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a selftest for PIDFD_INFO_EXIT behavior.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-15-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a selftest for PIDFD_INFO_EXIT behavior.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-14-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a selftest for PIDFD_INFO_EXIT behavior.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-13-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a selftest for PIDFD_INFO_EXIT behavior.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-12-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a selftest for PIDFD_INFO_EXIT behavior.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-11-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a selftest for PIDFD_INFO_EXIT behavior.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-10-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move more infrastructure to the pidfd header.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-9-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ensure that necessary ioctl infrastructure is available.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-8-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ensure that necessary defines are present.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-7-c8c3d8361705@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
'misc.2025.03.04a', 'srcu.2025.02.05a' and 'torture.2025.02.05a'
|
|
This commit tests lazy preemption by causing the TREE07 rcutorture
scenario to build its kernel with CONFIG_PREEMPT_LAZY=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
This commit tests lazy preemption by causing the TREE10 rcutorture
scenario to build its kernel with CONFIG_PREEMPT_LAZY=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Add extra parameters for rcutorture module. One is the "nfakewriters"
which is set -1. There will be created number of test-kthreads which
correspond to number of CPUs in a test system. Those threads randomly
invoke synchronize_rcu() call.
Apart of that "rcu_normal" is set to 1, because it is specifically for
a normal synchronize_rcu() testing, also a newly added parameter which
is "rcu_normal_wake_from_gp" is set to 1 also. That prevents interaction
with other callbacks in a system.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lore.kernel.org/r/20250227131613.52683-2-urezki@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The event count could be negative in the future,
so change the event type from u64 to s64.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Commit 14be4e6f3522 ("selftests: vDSO: fix ELF hash table entry size for s390x")
changed the type of the ELF hash table entries to 64bit on s390x.
However the *GNU* hash tables entries are always 32bit.
The "bucket" pointer is shared between both hash algorithms.
On s390, this caused the GNU hash algorithm to access its 32-bit entries as if they
were 64-bit, triggering compiler warnings (assignment between "Elf64_Xword *" and
"Elf64_Word *") and runtime crashes.
Introduce a new dedicated "gnu_bucket" pointer which is used by the GNU hash.
Fixes: e0746bde6f82 ("selftests/vDSO: support DT_GNU_HASH")
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250217-selftests-vdso-s390-gnu-hash-v2-1-f6c2532ffe2a@linutronix.de
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
