summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2015-08-24perf tools: Add new Intel PT packet definitionsAdrian Hunter
New features have been added to Intel PT which include a number of new packet definitions. This patch adds packet definitions for new packets: TMA, MTC, CYC, VMCS, TRACESTOP and MNT. Also another bit in PIP is defined. This patch only adds support for the definitions. Later patches add support for decoding TMA, MTC, CYC and TRACESTOP which is where those packets are explained. VMCS and the newly defined bit in PIP are used with virtualization which is not supported yet. MNT is a maintenance packet which the decoder should ignore. For details, refer to the June 2015 or later Intel 64 and IA-32 Architectures SDM Chapter 36 Intel Processor Trace. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-19-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-24perf tools: Add Intel PT support for PSB periodsAdrian Hunter
The PSB packet is a synchronization packet that provides a starting point for decoding or recovery from errors. This patch adds support for a new Intel PT feature that allows the frequency of PSB packets to be specified. Support for this feature is indicated by /sys/bus/event_source/devices/intel_pt/caps/psb_cyc which contains "1" if the feature is supported and "0" otherwise. The PSB period can be specified as a PMU config term e.g. perf record -e intel_pt/psb_period=2/u sleep 1 The default value is 3 or the nearest lower value that is supported. 0 is always supported. Valid values are given by: /sys/bus/event_source/devices/intel_pt/caps/psb_periods which contains a hexadecimal value, the bits of which represent valid values e.g. bit 2 set means value 2 is valid. The value is converted to the approximate number of trace bytes between PSB packets as: 2 ^ (value + 11) e.g. value 3 means 16KiB bytes between PSBs If an invalid value is entered, the error message will give a list of valid values e.g. $ perf record -e intel_pt/psb_period=15/u uname Invalid psb_period for intel_pt. Valid values are: 0-5 tools/perf/Documentation/intel-pt.txt is updated in a later patch as there are a number of new features being added. For more information about PSB periods refer to the Intel 64 and IA-32 Architectures SDM Chapter 36 Intel Processor Trace from June 2015 or later. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-18-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-24perf tools: Fix Intel PT 'instructions' sample periodAdrian Hunter
The period on synthesized 'instructions' samples was being set to a fixed value, whereas the correct value is the number of instructions since the last sample, which is a value that the decoder can provide. So do it that way. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-14-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-24perf ordered_events: Clear the progress bar at the end of a flushArnaldo Carvalho de Melo
We were depending on the next screen operation after a flush() being one that would redraw the whole screen so that the progress bar would be overwritten, when that didn't happen a screen artifact of, say, a error dialog window would be overlaid on top of the progress bar, fix it by calling ui_browser__finish(), that now has a TUI implementation. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-el0fyw6duemnx62lydjzhs8c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-24perf ui tui progress: Implement the ui_progress_ops->finish() methodArnaldo Carvalho de Melo
So that we can erase the progress bar after we're done with it, avoiding things like: ------------------------------------------------------------------- ┌─Error:──────────────────────────────────────────────────────┐ │Can't annotate unmapped_area_topdown: │ │ │ │No vmlinux file with build id a826726b5ddacfab1f0bade868f1a79│ │was found in the path. │ │ │ │Note that annotation using /proc/kcore requires CAP_SYS_RAWIO│ ┌Processin│ │──┐ │ │Please use: │ │ └─────────│ │──┘ │ perf buildid-cache -vu vmlinux │ │ │ │or: │ │ │ │ --vmlinux vmlinux │ │ │ │ │ │Press any key... │ └─────────────────────────────────────────────────────────────┘ Can't annotate unmapped_area_topdown: ------------------------------------------------------------------- I.e. that finished progress bar behind the error window. It is not a problem when we end up redrawing the whole screen, but its ugly when we present such error windows, provide a TUI method so that code like the above may avoid this situation, as will be done with the annotation code in the next cset. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qvktnojzwwe37pweging058t@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-24perf annotate: Reset the dso find_symbol cache when removing symbolsArnaldo Carvalho de Melo
The 'annotate' tool does some filtering in the entries in a DSO but forgot to reset the cache done in dso__find_symbol(), cauxing a SEGV: [root@zoo ~]# perf annotate netlink_poll perf: Segmentation fault -------- backtrace -------- perf[0x526ceb] /lib64/libc.so.6(+0x34960)[0x7faedfbe0960] perf(rb_erase+0x223)[0x499d63] perf[0x4213e9] perf[0x4bc123] perf[0x4bc621] perf[0x4bf26b] perf[0x4bc855] perf(perf_session__process_events+0x340)[0x4bddc0] perf(cmd_annotate+0x6bb)[0x421b5b] perf[0x479063] perf(main+0x60a)[0x42098a] /lib64/libc.so.6(__libc_start_main+0xf0)[0x7faedfbcbfe0] perf[0x420aa9] [0x0] [root@zoo ~]# Fix it by reseting the find cache when removing symbols. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Fixes: b685ac22b436 ("perf symbols: Add front end cache for DSO symbol lookup") Link: http://lkml.kernel.org/n/tip-b2y9x46y0t8yem1ive41zqyp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-22perf tools: Fix tarball build broken by pt/btsAdrian Hunter
Fix some include paths and add missing inat_types.h. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/55D77696.60102@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/qmi_wwan.c Overlapping additions of new device IDs to qmi_wwan.c Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21perf probe: Try to use symbol table if searching debug info failedWang Nan
A problem can occur in a statically linked perf when vmlinux can be found: # perf probe --add sys_epoll_pwait probe-definition(0): sys_epoll_pwait symbol:sys_epoll_pwait file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Looking at the vmlinux_path (7 entries long) Using /lib/modules/4.2.0-rc1+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.2.0-rc1+/build/vmlinux Try to find probe point from debuginfo. Symbol sys_epoll_pwait address found : ffffffff8122bd40 Matched function: SyS_epoll_pwait Failed to get call frame on 0xffffffff8122bd40 An error occurred in debuginfo analysis (-2). Error: Failed to add events. Reason: No such file or directory (Code: -2) The reason is caused by libdw that, if libdw is statically linked, it can't load libebl_{arch}.so reliable. In this case it is still possible to get the address from /proc/kalksyms. However, perf tries that only when libdw returns -EBADF. This patch gives it another chance to utilize symbol table, even if libdw returns an error code other than -EBADF. After applying this patch: # perf probe -nv --add sys_epoll_pwait probe-definition(0): sys_epoll_pwait symbol:sys_epoll_pwait file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Looking at the vmlinux_path (7 entries long) Using /lib/modules/4.2.0-rc1+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.2.0-rc1+/build/vmlinux Try to find probe point from debuginfo. Symbol sys_epoll_pwait address found : ffffffff8122bd40 Matched function: SyS_epoll_pwait Failed to get call frame on 0xffffffff8122bd40 An error occurred in debuginfo analysis (-2). Trying to use symbols. Opening /sys/kernel/debug/tracing/kprobe_events write=1 Added new event: Writing event: p:probe/sys_epoll_pwait _text+2276672 probe:sys_epoll_pwait (on sys_epoll_pwait) You can now use it in all perf tools, such as: perf record -e probe:sys_epoll_pwait -aR sleep 1 Although libdw returns an error (Failed to get call frame), perf tries symbol table and finally gets correct address. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1440151770-129878-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-21perf tools: Initialize reference counts in map__clone()Arnaldo Carvalho de Melo
Map clone was written before we introduced reference counts for maps and dsos, so all that was needed was just a copy and then we would insert it into the new map_groups instance. Fix it by, after copying, initializing the map->refcnt, grabbing a struct dso refcount and resetting pointers that may be used to determine if a map, when deleted, is in a rb_tree. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pd4mr80o5b9gvk50iineacec@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-21perf tools: Add example call-graph scriptAdrian Hunter
Add a script to produce a call-graph from data exported to a postgresql database and derived from a processor trace event like intel_pt or intel_bts. Refer to comments in the scripts call-graph-from-postgresql.py and export-to-postgresql.py for more details on how to set up the environment, install the required packages, etc. Committer note: From the scripts, for convenience while reading 'git log': An example of using this script with Intel PT: $ perf record -e intel_pt//u ls $ perf script -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py pt_example branches calls 2015-05-29 12:49:23.464364 Creating database... 2015-05-29 12:49:26.281717 Writing to intermediate files... 2015-05-29 12:49:27.190383 Copying to database... 2015-05-29 12:49:28.140451 Removing intermediate files... 2015-05-29 12:49:28.147451 Adding primary keys 2015-05-29 12:49:28.655683 Adding foreign keys 2015-05-29 12:49:29.365350 Done $ python tools/perf/scripts/python/call-graph-from-postgresql.py pt_example # The result is a GUI window with a tree representing a context-sensitive # call-graph. Expanding a couple of levels of the tree and adjusting column # widths to suit will display something like: Call Graph: pt_example Call Path |Object |Count|Time(ns)|Time(%)|Branch Count|Branch Count(%) v- ls v- 2638:2638 v- _start ld-2.19.so 1 10074071 100.0 211135 100.0 |- unknown unknown 1 13198 0.1 1 0.0 >- _dl_start ld-2.19.so 1 1400980 13.9 19637 9.3 >- _d_linit_internal ld-2.19.so 1 448152 4.4 11094 5.3 v-__libc_start_main@plt ls 1 8211741 81.5 180397 85.4 >- _dl_fixup ld-2.19.so 1 7607 0.1 108 0.1 >- __cxa_atexit libc-2.19.so 1 11737 0.1 10 0.0 >- __libc_csu_init ls 1 10354 0.1 10 0.0 |- _setjmp libc-2.19.so 1 0 0.0 4 0.0 v- main ls 1 8182043 99.6 180254 99.9 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-11-git-send-email-adrian.hunter@intel.com [ Added 'python-pyside qt-postgresql' to the yum cmdline installing required packages ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-21perf tools: Put itrace options into an asciidoc includeAdrian Hunter
perf script, report and inject all have the same itrace options. Put them into an asciidoc include file. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-10-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-21perf tools: Add Intel BTS supportAdrian Hunter
Intel BTS support fits within the new auxtrace infrastructure. Recording is supporting by identifying the Intel BTS PMU, parsing options and setting up events. Decoding is supported by queuing up trace data by thread and then decoding synchronously delivering synthesized event samples into the session processing for tools to consume. Committer note: E.g: [root@felicio ~]# perf record --per-thread -e intel_bts// ls anaconda-ks.cfg apctest.output bin kernel-rt-3.10.0-298.rt56.171.el7.x86_64.rpm libexec lock_page.bpf.c perf.data perf.data.old [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 4.367 MB perf.data ] [root@felicio ~]# perf evlist -v intel_bts//: type: 6, size: 112, { sample_period, sample_freq }: 1, sample_type: IP|TID|IDENTIFIER, read_format: ID, disabled: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 dummy:u: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 1, sample_type: IP|TID|IDENTIFIER, read_format: ID, disabled: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1 [root@felicio ~]# perf script # the navigate in the pager to some interesting place: ls 1843 1 branches: ffffffff810a60cb flush_signal_handlers ([kernel.kallsyms]) => ffffffff8121a522 setup_new_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8121a529 setup_new_exec ([kernel.kallsyms]) => ffffffff8122fa30 do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122fa5d do_close_on_exec ([kernel.kallsyms]) => ffffffff81767ae0 _raw_spin_lock ([kernel.kallsyms]) ls 1843 1 branches: ffffffff81767af4 _raw_spin_lock ([kernel.kallsyms]) => ffffffff8122fa62 do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122fac9 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fad2 do_close_on_exec ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8122fadd do_close_on_exec ([kernel.kallsyms]) => ffffffff8120fc80 filp_close ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8120fcaf filp_close ([kernel.kallsyms]) => ffffffff8120fcb6 filp_close ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8120fcc2 filp_close ([kernel.kallsyms]) => ffffffff812547f0 dnotify_flush ([kernel.kallsyms]) ls 1843 1 branches: ffffffff81254823 dnotify_flush ([kernel.kallsyms]) => ffffffff8120fcc7 filp_close ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8120fccd filp_close ([kernel.kallsyms]) => ffffffff81261790 locks_remove_posix ([kernel.kallsyms]) ls 1843 1 branches: ffffffff812617a3 locks_remove_posix ([kernel.kallsyms]) => ffffffff812617b9 locks_remove_posix ([kernel.kallsyms]) ls 1843 1 branches: ffffffff812617b9 locks_remove_posix ([kernel.kallsyms]) => ffffffff8120fcd2 filp_close ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8120fcd5 filp_close ([kernel.kallsyms]) => ffffffff812142c0 fput ([kernel.kallsyms]) ls 1843 1 branches: ffffffff812142d6 fput ([kernel.kallsyms]) => ffffffff812142df fput ([kernel.kallsyms]) ls 1843 1 branches: ffffffff8121430c fput ([kernel.kallsyms]) => ffffffff810b6580 task_work_add ([kernel.kallsyms]) ls 1843 1 branches: ffffffff810b65ad task_work_add ([kernel.kallsyms]) => ffffffff810b65b1 task_work_add ([kernel.kallsyms]) ls 1843 1 branches: ffffffff810b65c1 task_work_add ([kernel.kallsyms]) => ffffffff810bc710 kick_process ([kernel.kallsyms]) ls 1843 1 branches: ffffffff810bc725 kick_process ([kernel.kallsyms]) => ffffffff810bc742 kick_process ([kernel.kallsyms]) ls 1843 1 branches: ffffffff810bc742 kick_process ([kernel.kallsyms]) => ffffffff810b65c6 task_work_add ([kernel.kallsyms]) ls 1843 1 branches: ffffffff810b65c9 task_work_add ([kernel.kallsyms]) => ffffffff81214311 fput ([kernel.kallsyms]) Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-9-git-send-email-adrian.hunter@intel.com [ Merged sample->time fix for bug found after first round of testing on slightly older kernel ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-21tools lib traceevent: Add checks for returned EVENT_ERROR typeDean Nelson
Running the following perf-stat command on an arm64 system produces the following result... [root@aarch64 ~]# perf stat -e kmem:mm_page_alloc -a sleep 1 Warning: [kmem:mm_page_alloc] function sizeof not defined Warning: Error: expected type 4 but read 0 Segmentation fault [root@aarch64 ~]# The second warning was a result of the first warning not stopping processing after it detected the issue. That is, code that found the issue reported the first problem, but because it did not exit out of the functions smoothly, it caused the other warning to appear and not only that, it later caused the SIGSEGV. Signed-off-by: Dean Nelson <dnelson@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150820151632.13927.13791.email-sent-by-dnelson@teal Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-21perf tools: Fix Intel PT timestamp handlingAdrian Hunter
Events that don't sample the timestamp have a timestamp value of -1. Intel PT processing wasn't taking that into account. This is particularly noticeable with Intel BTS because timestamps are not requested by default. Then, if the conversion of -1 to TSC results in a small number, the processing is unaffected. However if the conversion results in a big number, then the data is processed prematurely before relevant sideband data like mmap events, which in turn results in samples with unknown dsos. Commiter note: Since BTS wasn't upstream, I split the patch to fold the BTS part with the patch introducing it, to avoid having this bug in the commit history. PT was already upstream, so this patch contains that part. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1440060692-5585-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-21perf tools: /proc/kcore requires CAP_SYS_RAWIO message too noisyAdrian Hunter
The "/proc/kcore requires CAP_SYS_RAWIO" message comes up all the time for 'perf script' if vmlinux is not found and the user isn't root, even when the kernel is not being traced and even though the message is only really relevant for annotation. Change it to pr_debug and instead put a note in the message displayed if annotation is not possible. Also, the file being accessed might not be /proc/kcore. Tools can be directed to a different location using the --kallsyms option in which case kcore is expected to be in the same directory. Adjust the message so it is not misleading in that case. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Zhang <zhlcindy@linux.vnet.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1440065260-8802-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-21perf script: Fix segfault using --show-mmap-eventsAdrian Hunter
Patch "perf script: Don't assume evsel position of tracking events" changed 'perf script' to use 'perf_evlist__id2evsel()'. That results in a segfault if there is more than 1 event and there are synthesized mmap events e.g. $ perf record -e cycles,instructions -p$$ sleep 1 $ perf script --show-mmap-events Segmentation fault (core dumped) That happens because these synthesized events have an 'id' of zero which does not match any 'evsel'. Currently, these synthesized events use the sample type of the first evsel. Change 'perf_evlist__id2evsel()' to reflect that which also makes it consistent with 'perf_evlist__event2evsel()'. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 06b234ec26fd ("perf script: Don't assume evsel position of tracking events") Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1440059205-1765-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-20Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Support Intel PT in several tools, enabling the use of the processor trace feature introduced in Intel Broadwell processors: (Adrian Hunter) # dmesg | grep Performance # [0.188477] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. # perf record -e intel_pt//u -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.216 MB perf.data ] # perf script # then navigate in the tool output to some area, like this one: 184 1030 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba661440 dl_main (/usr/lib64/ld-2.17.so) 185 1457 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba669f10 _dl_new_object (/usr/lib64/ld-2.17.so) 186 9f37 _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba677b90 strlen (/usr/lib64/ld-2.17.so) 187 7ba3 strlen (/usr/lib64/ld-2.17.so) => 7f21ba677c75 strlen (/usr/lib64/ld-2.17.so) 188 7c78 strlen (/usr/lib64/ld-2.17.so) => 7f21ba669f3c _dl_new_object (/usr/lib64/ld-2.17.so) 189 9f8a _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba65fab0 calloc@plt (/usr/lib64/ld-2.17.so) 190 fab0 calloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e70 calloc (/usr/lib64/ld-2.17.so) 191 5e87 calloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa90 malloc@plt (/usr/lib64/ld-2.17.so) 192 fa90 malloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e60 malloc (/usr/lib64/ld-2.17.so) 193 5e68 malloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so) 194 fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so) => 7f21ba675d50 __libc_memalign (/usr/lib64/ld-2.17.so) 195 5d63 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e20 __libc_memalign (/usr/lib64/ld-2.17.so) 196 5e40 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675d73 __libc_memalign (/usr/lib64/ld-2.17.so) 197 5d97 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e18 __libc_memalign (/usr/lib64/ld-2.17.so) 198 5e1e __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675df9 __libc_memalign (/usr/lib64/ld-2.17.so) 199 5e10 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba669f8f _dl_new_object (/usr/lib64/ld-2.17.so) 200 9fc2 _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba678e70 memcpy (/usr/lib64/ld-2.17.so) 201 8e8c memcpy (/usr/lib64/ld-2.17.so) => 7f21ba678ea0 memcpy (/usr/lib64/ld-2.17.so) - Fix annotation of vdso (Adrian Hunter) - Fix DWARF callchains in 'perf script' (Jiri Olsa) - Fix adding probes in kernel syscalls and listing which variables can be collected at kernel syscall function lines (Masami Hiramatsu) Build Fixes: - Fix 32-bit compilation error in util/annotate.c (Adrian Hunter) - Support static linking with libdw on Fedora 22 (Andi Kleen) Infrastructure changes: - Add a helper function to probe whether cpu-wide tracing is possible (Adrian Hunter) - Move vfs_getname storage to per thread area in 'perf trace' (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-20Merge branch 'perf/urgent' into perf/core, to pick up fixes before adding ↵Ingo Molnar
more changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-20Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix buildid processing done at the end of a 'perf record' session, a problem that happened in workloads involving lots of small short-lived processes. That code was not asking the perf_session layer to order the events. Make the code more robust to handle some of the problems with such out-of-order events and fix 'perf record' to ask for ordered events on systems where we have perf_event_attr.sample_id_all. (Adrian Hunter) - Show backtrace when handling a SIGSEGV in 'perf top --stdio' (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-19perf top: Show backtrace when handling a SIGSEGV on --stdio modeArnaldo Carvalho de Melo
It was just freezing instead of informing about the SEGV, fix it and also print a backtrace, just like in the TUI mode and in 'perf trace'. Tested by provoking a NULL deref when pressing 'z': 0.31% libc-2.20.so [.] malloc_consolidate 0.31% ld-2.20.so [.] _dl_relocate_object 0.28% cc1 [.] ht_lookup 0.28% cc1 [.] ira_init_register_move_cost perf: Segmentation fault Obtained 7 stack frames. perf(dump_stack+0x32) [0x4d69f2] perf(sighandler_dump_stack+0x29) [0x4d6a89] /lib64/libc.so.6(+0x34960) [0x7f5064333960] perf() [0x438790] /lib64/libpthread.so.0(+0x752a) [0x7f50663dd52a] /lib64/libc.so.6(clone+0x6d) [0x7f50643ff22d] # Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pewrpzqd29rgmhu2wkk7fhww@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-19perf tools: Fix buildid processingAdrian Hunter
After recording, 'perf record' post-processes the data to determine which buildids are needed. That processing must process the data in time order, if possible, because otherwise dependent events, like forks and mmaps, will not make sense. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1439994561-27436-4-git-send-email-adrian.hunter@intel.com [ Moved the sample_id_add to after trying to open the events, use pr_warning ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-19perf tools: Make fork event processing more resilientAdrian Hunter
When processing a fork event, the tools lookup the parent thread by its tid. In a couple of cases, it is possible for that thread to have the wrong pid. That can happen if the data is being processed out of order, or if the (fork) event that would have removed the erroneous thread was lost. Assume the latter case, print a dump message, remove the erroneous thread, create a new one with the correct pid, and keep going. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1439994561-27436-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-19perf tools: Avoid deadlock when map_groups are brokenAdrian Hunter
Attempting to clone map groups onto themselves will deadlock. It only happens because of other bugs, but the code should protect itself anyway. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1439994561-27436-2-git-send-email-adrian.hunter@intel.com [ Use pr_debug() instead of dump_fprintf() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-19libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate optionDan Williams
We currently register a platform device for e820 type-12 memory and register a nvdimm bus beneath it. Registering the platform device triggers the device-core machinery to probe for a driver, but that search currently comes up empty. Building the nvdimm-bus registration into the e820_pmem platform device registration in this way forces libnvdimm to be built-in. Instead, convert the built-in portion of CONFIG_X86_PMEM_LEGACY to simply register a platform device and move the rest of the logic to the driver for e820_pmem, for the following reasons: 1/ Letting e820_pmem support be a module allows building and testing libnvdimm.ko changes without rebooting 2/ All the normal policy around modules can be applied to e820_pmem (unbind to disable and/or blacklisting the module from loading by default) 3/ Moving the driver to a generic location and converting it to scan "iomem_resource" rather than "e820.map" means any other architecture can take advantage of this simple nvdimm resource discovery mechanism by registering a resource named "Persistent Memory (legacy)" Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-18selftests/x86: Add syscall_nt selftestAndy Lutomirski
I've had this sitting around for a while. Add it to the selftests tree. Far Cry running under Wine depends on this behavior. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/ee4d63799a9e5294b70930618b71d04d2770eb2d.1439838962.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-18selftests/x86: Disable sigreturn_64Andy Lutomirski
sigreturn_64 was broken by ed596cde9425 ("Revert x86 sigcontext cleanups"). Turn it off until we have a better fix. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/a184e75ff170a0bcd76bf376c41cad2c402fe9f7.1439838962.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-18Merge branch 'x86/urgent' into x86/asm to fix up conflicts and to pick up fixesIngo Molnar
Conflicts: arch/x86/entry/entry_64_compat.S arch/x86/math-emu/get_address.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-17selftests/net: test extended BPF fanout modeWillem de Bruijn
Test PACKET_FANOUT_EBPF by inserting a program into the the kernel with bpf(), then attaching it to the fanout group. Observe the same payload-based distribution as in the PACKET_FANOUT_CBPF test. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17selftests/net: test classic bpf fanout modeWillem de Bruijn
Test PACKET_FANOUT_CBPF by inserting a cBPF program that selects a socket by payload. Requires modifying the test program to send packets with multiple payloads. Also fix a bug in testing the return value of mmap() Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17perf tools: Take Intel PT into useAdrian Hunter
To record an AUX area, the weak function auxtrace_record__init() must be implemented. Equally to decode an AUX area, the AUX area tracing type must be added to the perf_event__process_auxtrace_info() function. This patch makes those two changes plus hooks up default config for the intel_pt PMU. Also some brief documentation is provided for using the tools with intel_pt. Commiter note: E.g: [root@perf4 ~]# dmesg 451 [0.405807] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. [root@perf4 ~]# perf --version perf version 4.1.g53874a [root@perf4 ~]# perf record -e intel_pt//u -a sleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.383 MB perf.data ] [root@perf4 ~]# perf evlist intel_pt//u sched:sched_switch dummy:u [root@perf4 ~]# perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 0 of event 'intel_pt//u' # Event count (approx.): 0 # # Overhead Command Shared Object Symbol # ........ ....... ............. ...... # # Samples: 393 of event 'sched:sched_switch' # Event count (approx.): 393 # # Overhead Command Shared Object Symbol # ........ .............. ................ .............. 49.62% swapper [kernel.vmlinux] [k] __schedule 10.69% rcu_sched [kernel.vmlinux] [k] __schedule 6.62% rcuos/0 [kernel.vmlinux] [k] __schedule 5.60% kworker/0:1 [kernel.vmlinux] [k] __schedule 3.56% rcuos/3 [kernel.vmlinux] [k] __schedule 3.05% kworker/u384:2 [kernel.vmlinux] [k] __schedule 2.54% kworker/2:0 [kernel.vmlinux] [k] __schedule 2.54% tuned [kernel.vmlinux] [k] __schedule <SNIP> # Samples: 0 of event 'dummy:u' # Event count (approx.): 0 # # Overhead Command Shared Object Symbol # ........ ....... ............. ...... # Samples: 28 of event 'instructions:u' # Event count (approx.): 5030172 # # Overhead Command Shared Object Symbol # ........ .......... ................... ................................ # 21.43% tuned libpython2.7.so.1.0 [.] PyEval_EvalFrameEx | ---PyEval_EvalFrameEx | |--83.33%-- PyEval_EvalCodeEx | PyEval_EvalFrameEx | | | |--60.00%-- PyEval_EvalCodeEx | | PyEval_EvalFrameEx | | PyEval_EvalFrameEx | | | --40.00%-- PyEval_EvalFrameEx | --16.67%-- PyEval_EvalFrameEx PyEval_EvalCodeEx PyEval_EvalFrameEx PyEval_EvalCodeEx PyEval_EvalFrameEx PyEval_EvalFrameEx 14.29% tuned libpython2.7.so.1.0 [.] _PyType_Lookup | ---_PyType_Lookup _PyObject_GenericGetAttrWithDict PyEval_EvalFrameEx PyEval_EvalCodeEx PyEval_EvalFrameEx PyEval_EvalCodeEx PyEval_EvalFrameEx | |--75.00%-- PyEval_EvalFrameEx | --25.00%-- PyEval_EvalCodeEx PyEval_EvalFrameEx PyEval_EvalFrameEx 3.57% irqbalance irqbalance [.] 0x0000000000004038 | ---0x4038 0x4761 0x4761 0x4761 0x49f1 0x2295 3.57% irqbalance libc-2.17.so [.] __GI_____strtoull_l_internal | ---__GI_____strtoull_l_internal 0x6f49 0x229a 3.57% irqbalance libc-2.17.so [.] __strchrnul | ---__strchrnul vfprintf __vsprintf_chk __sprintf_chk 0x2724 0x4038 0x2331 3.57% irqbalance libc-2.17.so [.] __strstr_sse42 | ---__strstr_sse42 0x71e0 0x229f # And now to some userspace ftrace on uninstrumented binaries 8-) : # Hand edited to make it a bit more compact, replacing /home/acme/bin/perf # with /bin/perf: [root@perf4 ~]# perf script perf 8921 [3] 7.310889: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310889: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 481630 perf_evlist__enable (/bin/perf) => 4816d8 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 4816de perf_evlist__enable (/bin/perf) => 48164f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310889: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.310890: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310890: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310890: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310890: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310890: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310890: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310890: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.310893: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310893: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310893: 1 branches:u: 4816a8 perf_evlist__enable (/bin/perf) => 4815f8 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310893: 1 branches:u: 4815fe perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310893: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310893: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310893: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310893: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.310956: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310956: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 481630 perf_evlist__enable (/bin/perf) => 4816d8 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 4816de perf_evlist__enable (/bin/perf) => 48164f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310956: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.310961: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310961: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310961: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310961: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310961: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310961: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310961: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.310968: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310968: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310968: 1 branches:u: 4816a8 perf_evlist__enable (/bin/perf) => 4815f8 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310968: 1 branches:u: 4815fe perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310968: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310968: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310968: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310968: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.311040: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.311040: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 481630 perf_evlist__enable (/bin/perf) => 4816d8 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 4816de perf_evlist__enable (/bin/perf) => 48164f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.311040: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.311046: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.311046: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311046: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311046: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311046: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.311046: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.311046: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.311050: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.311050: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) : Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-8-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add Intel PT supportAdrian Hunter
Add support for Intel Processor Trace. Intel PT support fits within the new auxtrace infrastructure. Recording is supporting by identifying the Intel PT PMU, parsing options and setting up events. Decoding is supported by queuing up trace data by cpu or thread and then decoding synchronously delivering synthesized event samples into the session processing for tools to consume. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-7-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add Intel PT decoderAdrian Hunter
Add support for decoding an Intel Processor Trace. Intel PT trace data must be 'decoded' which involves walking the object code and matching the trace data packets. The decoder requests a buffer of binary data via a get_trace() call-back, which it decodes using instruction information which it gets via another call-back walk_insn(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-6-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add Intel PT logAdrian Hunter
Add a facility to log Intel Processor Trace decoding. The log is intended for debugging purposes only. The log file name is "intel_pt.log" and is opened in the current directory. The log contains a record of all packets and instructions decoded and can get very large (10 MB would be a small one). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-5-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add Intel PT instruction decoderAdrian Hunter
Add support for decoding instructions for Intel Processor Trace. The kernel x86 instruction decoder is copied for this. This essentially provides intel_pt_get_insn() which takes a binary buffer, uses the kernel's x86 instruction decoder to get details of the instruction and then categorizes it for consumption by an Intel PT decoder. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1439450095-30122-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add Intel PT packet decoderAdrian Hunter
Add support for decoding Intel Processor Trace packets. This essentially provides intel_pt_get_packet() which takes a buffer of binary data and returns the decoded packet. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf auxtrace: Add Intel PT as an AUX area tracing typeAdrian Hunter
Add the Intel Processor Trace type constant PERF_AUXTRACE_INTEL_PT. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add a helper function to probe whether cpu-wide tracing is possibleAdrian Hunter
Add a helper function to probe whether cpu-wide tracing is possible. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1439458857-30636-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf symbols: Fix annotation of vdsoAdrian Hunter
Older kernels attempt to prelink vdso to its virtual address. To permit annotation using objdump, the map__rip_2objdump() calculation must result in that same address which we can infer from the start and offset of the text section. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1439556606-11297-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf annotate: Fix 32-bit compilation error in util/annotate.cAdrian Hunter
Fix the following 32-bit compilation errors: util/annotate.c: In function ‘addr_map_symbol__account_cycles’: util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘u64’ [-Werror=format=] pr_debug2("BB with bad start: addr %lx start %lx sym %lx saddr %lx\n", ^ util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘u64’ [-Werror=format=] util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘u64’ [-Werror=format=] These were introduced by the patch: "perf report: Add infrastructure for a cycles histogram" Also change the 'saddr' variable from 'unsigned long' to 'u64' noting that theoretically we could be processing data captured on a 64-bit machine but processing it on a 32-bit machine. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: d4957633bf9d ("perf report: Add infrastructure for a cycles histogram") Link: http://lkml.kernel.org/r/1439536294-18241-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf script: Initialize callchain_param.record_modeJiri Olsa
Milian Wolff reported non functional DWARF unwind under perf script. The reason is that perf script does not properly configure callchain_param.record_mode, which is needed by unwind code. Stealing the code from report and leaving the place for more initialization code in a hope we could merge it with report__setup_sample_type one day. Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Milian Wolff <milian.wolff@kdab.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150813071724.GA21322@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17selftests/powerpc: Install tempfile so the subpage_prot_file test worksMichael Ellerman
We forgot to install the tempfile, so when the selftests are installed and then run the subpage_prot_file test fails. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-17perf tools: xtensa: add DWARF register namesMax Filippov
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-16iio: generic_buffer: be helpful about enabling channelsLinus Walleij
Currently if generic_buffer is invoked without first enabling any channels in scan_elements/*_en, it will fail unable to enable the buffer because bytes_per_datum inside the kernel will be zero if no channels are available. It is implied that the user of the program should enable channels manually or with a script before executing generic_buffer. Be more helpful by stopping execution if no enabled channels can be found, and print a helptext that will tell you what is wrong and what needs to be done. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16iio: event_monitor: report unsupported eventsLinus Walleij
This makes the event monitor bail out with a helpful error message if a device does not support events, as a related fix to iio core now makes it return -ENODEV properly. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-14pmem: switch to devm_ allocationsChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> [djbw: tools/testing/nvdimm/ and memunmap_pmem support] Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-14Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: PMU driver corner cases, tooling fixes, and an 'AUX' (Intel PT) race related core fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/cqm: Do not access cpu_data() from CPU_UP_PREPARE handler perf/x86/intel: Fix memory leak on hot-plug allocation fail perf: Fix PERF_EVENT_IOC_PERIOD migration race perf: Fix double-free of the AUX buffer perf: Fix fasync handling on inherited events perf tools: Fix test build error when bindir contains double slash perf stat: Fix transaction lenght metrics perf: Fix running time accounting
2015-08-14pmem: convert to generic memremapDan Williams
Kill arch_memremap_pmem() and just let the architecture specify the flags to be passed to memremap(). Default to writethrough by default. Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-14perf trace: Move vfs_getname storage to per thread areaArnaldo Carvalho de Melo
We were storing the vfs_getname payload (i.e. ptr->string) into the trace wide storage area (struct trace), so that we could use the last payload when setting up the fd->pathname per thread tables, oops, not a good idea for multi cpu tracing sessions... Fix it by moving it to the per thread area (struct thread_trace). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-3j05ttqyaem7kh7oubvr1keo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-13perf probe: Fix to add missed brace around if blockMasami Hiramatsu
The commit 75186a9b09e4 (perf probe: Fix to show lines of sys_ functions correctly) introduced a bug by a missed brace around if block. This fixes to add it. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 75186a9b09e4 ("perf probe: Fix to show lines of sys_ functions correctly") Link: http://lkml.kernel.org/r/20150812215541.9088.62425.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 05:27:15 +0000