Age | Commit message (Collapse) | Author |
|
To make it clear what's required and what's not. Also, some of the
values don't seem like a good defaults; for example eth1.
Move the invocation comment to the top, add missing -s to the client
and cleanup the client invocation a bit to make more readable.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support 3-tuple filtering by making client_ip optional. When -c is
not passed, don't specify src-ip/src-port in the filter.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-5-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a bunch of places where error() calls look out of place.
Use the same error(1, errno, ...) pattern everywhere.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
So we can plug the other ones in the future if needed.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
That should make it possible to do expected payload validation on
the caller side.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test for VLAN ping for HSR. The test adds vlan interfaces to the hsr
interface and then verifies if ping to them works.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20241106091710.3308519-5-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53e6 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 49f59573e9e0 ("selftests/mm: Enable pkey_sighandler_tests
on arm64"), pkey_sighandler_tests.c (which includes pkey-arm64.h via
pkey-helpers.h) ends up compiled for arm64. Since it doesn't use
aarch64_write_signal_pkey(), the compiler warns:
In file included from pkey-helpers.h:106,
from pkey_sighandler_tests.c:31:
pkey-arm64.h:130:13: warning: ‘aarch64_write_signal_pkey’ defined but not used [-Wunused-function]
130 | static void aarch64_write_signal_pkey(ucontext_t *uctxt, u64 pkey)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Make the aarch64_write_signal_pkey() a 'static inline void' function to
avoid the compiler warning.
Fixes: f5b5ea51f78f ("selftests: mm: make protection_keys test work on arm64")
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20241108110549.1185923-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fix the incorrect length modifiers in arm64/abi/syscall-abi.c.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241108134920.1233992-4-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
While prctl() returns an 'int', the PR_MTE_TCF_MASK is defined as
unsigned long which results in the larger type following a bitwise 'and'
operation. Cast the printf() argument to 'int'.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241108134920.1233992-3-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Lots of incorrect length modifiers, missing arguments or conversion
specifiers. Fix them.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241108134920.1233992-2-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
While some assemblers (including the LLVM assembler I mostly use) will
happily accept SMSTART as an instruction by default others, specifically
gas, require that any architecture extensions be explicitly enabled.
The assembler SME test programs use manually encoded helpers for the new
instructions but no SMSTART helper is defined, only SM and ZA specific
variants. Unfortunately the irritators that were just added use plain
SMSTART so on stricter assemblers these fail to build:
za-test.S:160: Error: selected processor does not support `smstart'
Switch to using SMSTART ZA via the manually encoded smstart_za macro we
already have defined.
Fixes: d65f27d240bb ("kselftest/arm64: Implement irritators for ZA and ZT")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241108-arm64-selftest-asm-error-v1-1-7ce27b42a677@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The test verifies that available features aren't changed by toggling
offload on the device. Creating a device with offload off and then
enabling it later should result in the same features as creating the
device with offload enabled directly.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ba801bd0a75b02de2dddbfc77f9efceb8b3d8a2e.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test verifies that toggling offload works (both via rtnetlink and
macsec's genetlink APIs). This is only possible when no SA is
configured.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/bf8e27ee0d921caa4eb35f1e830eca6d4080ddb2.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're going to expand this test, and macsec offload is only lightly
related to rtnetlink.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/a1f92c250cc129b4bb111a206c4b560bab4e24a5.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test checking that some features are active by default and
changeable.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/fff58fa70f8a300440958b5020f6a4eb2e9dad61.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- The fair sched class currently has a bug where its balance() returns
true telling the sched core that it has tasks to run but then NULL
from pick_task(). This makes sched core call sched_ext's pick_task()
without preceding balance() which can lead to stalls in partial mode.
For now, work around by detecting the condition and forcing the CPU
to go through another scheduling cycle.
- Add a missing newline to an error message and fix drgn introspection
tool which went out of sync.
* tag 'sched_ext-for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()
sched_ext: Update scx_show_state.py to match scx_ops_bypass_depth's new type
sched_ext: Add a missing newline at the end of an error message
|
|
The number of slabs can easily exceed the hard coded MAX_SLABS in the
slabinfo tool, causing it to overwrite memory and crash.
Increase the value of MAX_SLABS, and check if that has been exceeded for
each new slab, instead of at the end when it's already too late. Also
move the check for MAX_ALIASES into the loop body.
Link: https://lkml.kernel.org/r/20241031105534.565533-1-marc.c.dionne@gmail.com
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
RISC-V doesn't currently have the behavior of restricting the virtual
address space which virtual_address_range tests check, this will
cause the tests fail. So lets disable the whole test suite for riscv64
for now, not build it and run_vmtests.sh will skip it if it is not present.
Link: https://lkml.kernel.org/r/20241008094141.549248-5-zhangchunyan@iscas.ac.cn
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The function name should be *hint* address, so correct it.
Link: https://lkml.kernel.org/r/20241008094141.549248-4-zhangchunyan@iscas.ac.cn
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use appropriate frag_page API instead of caller accessing
'page_frag_cache' directly.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20241028115343.3405838-5-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Inspired by [1], move the page fragment allocator from page_alloc
into its own c file and header file, as we are about to make more
change for it to replace another page_frag implementation in
sock.c
As this patchset is going to replace 'struct page_frag' with
'struct page_frag_cache' in sched.h, including page_frag_cache.h
in sched.h has a compiler error caused by interdependence between
mm_types.h and mm.h for asm-offsets.c, see [2]. So avoid the compiler
error by moving 'struct page_frag_cache' to mm_types_task.h as
suggested by Alexander, see [3].
1. https://lore.kernel.org/all/20230411160902.4134381-3-dhowells@redhat.com/
2. https://lore.kernel.org/all/15623dac-9358-4597-b3ee-3694a5956920@gmail.com/
3. https://lore.kernel.org/all/CAKgT0UdH1yD=LSCXFJ=YM_aiA4OomD-2wXykO42bizaWMt_HOA@mail.gmail.com/
CC: David Howells <dhowells@redhat.com>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241028115343.3405838-3-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The testing is done by ensuring that the fragment allocated
from a frag_frag_cache instance is pushed into a ptr_ring
instance in a kthread binded to a specified cpu, and a kthread
binded to a specified cpu will pop the fragment from the
ptr_ring and free the fragment.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241028115343.3405838-2-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* kvm-arm64/mmio-sea:
: Fix for SEA injection in response to MMIO
:
: Fix + test coverage for SEA injection in response to an unhandled MMIO
: exit to userspace. Naturally, if userspace decides to abort an MMIO
: instruction KVM shouldn't continue with instruction emulation...
KVM: arm64: selftests: Add tests for MMIO external abort injection
KVM: arm64: selftests: Convert to kernel's ESR terminology
tools: arm64: Grab a copy of esr.h from kernel
KVM: arm64: Don't retire aborted MMIO instruction
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Drop useless check against vgic state in ICC_CLTR_EL1.SEIS read
: emulation
:
: - Fix trap configuration for pKVM
:
: - Close the door on initialization bugs surrounding userspace irqchip
: static key by removing it.
KVM: selftests: Don't bother deleting memslots in KVM when freeing VMs
KVM: arm64: Get rid of userspace_irqchip_in_use
KVM: arm64: Initialize trap register values in hyp in pKVM
KVM: arm64: Initialize the hypervisor's VM state at EL2
KVM: arm64: Refactor kvm_vcpu_enable_ptrauth() for hyp use
KVM: arm64: Move pkvm_vcpu_init_traps() to init_pkvm_hyp_vcpu()
KVM: arm64: Don't map 'kvm_vgic_global_state' at EL2 with pKVM
KVM: arm64: Just advertise SEIS as 0 when emulating ICC_CTLR_EL1
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When freeing a VM, don't call into KVM to manually remove each memslot,
simply cleanup and free any userspace assets associated with the memory
region. KVM is ultimately responsible for ensuring kernel resources are
freed when the VM is destroyed, deleting memslots one-by-one is
unnecessarily slow, and unless a test is already leaking the VM fd, the
VM will be destroyed when kvm_vm_release() is called.
Not deleting KVM's memslot also allows cleaning up dead VMs without having
to care whether or not the to-be-freed VM is dead or alive.
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvmarm/Zy0bcM0m-N18gAZz@google.com/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add "definitions" subcommand logic to emit maxsize macros in
generated code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Introduce logic in the code generators to emit maxsize (XDR
width) definitions. In C, these are pre-processor macros.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Not yet complete.
The tool doesn't do any math yet. Thus, even though the maximum XDR
width of a union is the width of the union enumerator plus the width
of its largest arm, we're using the sum of all the elements of the
union for the moment.
This means that buffer size requirements are overestimated, and that
the generated maxsize macro cannot yet be used for determining data
element alignment in the XDR buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The XDR width of a pointer type is the sum of the widths of each of
the struct's fields, except for the last field. The width of the
implicit boolean "value follows" field is added as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The XDR width of a struct type is the sum of the widths of each of
the struct's fields.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The XDR width of a typedef is the same as the width of the base type.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
A string works like a variable-length opaque. See Section 4.11 of
RFC 4506.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The byte size of a variable-length opaque is conveyed in an unsigned
integer. If there is a specified maximum size, that is included in
the type's widths list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The XDR width for a fixed-length opaque is the byte size of the
opaque rounded up to the next XDR_UNIT, divided by XDR_UNIT.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 4506 says that an XDR enum is represented as a signed integer
on the wire; thus its width is 1 XDR_UNIT.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The generic parts of the RPC layer need to know the widths (in
XDR_UNIT increments) of the XDR data types defined for each
protocol.
As a first step, add dictionaries to keep track of the symbolic and
actual maximum XDR width of XDR types.
This makes it straightforward to look up the width of a type by its
name. The built-in dictionaries are pre-loaded with the widths of
the built-in XDR types as defined in RFC 4506.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In order to compute the numeric on-the-wire width of XDR types,
xdrgen needs to keep track of the numeric value of constants that
are defined in the input specification so it can perform
calculations with those values.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Add a __post_init__ function to the data classes that
need to update the "structs" and "pass_by_reference" sets.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This simplifies the generated C code and makes way for supporting
big-endian XDR enums.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
"close.j2" is a confusing name.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I misread RFC 4506. The built-in data type is called simply
"string", as there is no fixed-length variety.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Make both arms of the type_specifier AST transformer
match. No behavior change is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
To use xdrgen in Makefiles, it needs to exit with a zero status if
the compilation worked. Otherwise the make command fails with an
error.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
* kvm-arm64/mpam-ni:
: Hiding FEAT_MPAM from KVM guests, courtesy of James Morse + Joey Gouly
:
: Fix a longstanding bug where FEAT_MPAM was accidentally exposed to KVM
: guests + the EL2 trap configuration was not explicitly configured. As
: part of this, bring in skeletal support for initialising the MPAM CPU
: context so KVM can actually set traps for its guests.
:
: Be warned -- if this series leads to boot failures on your system,
: you're running on turd firmware.
:
: As an added bonus (that builds upon the infrastructure added by the MPAM
: series), allow userspace to configure CTR_EL0.L1Ip, courtesy of Shameer
: Kolothum.
KVM: arm64: Make L1Ip feature in CTR_EL0 writable from userspace
KVM: arm64: selftests: Test ID_AA64PFR0.MPAM isn't completely ignored
KVM: arm64: Disable MPAM visibility by default and ignore VMM writes
KVM: arm64: Add a macro for creating filtered sys_reg_descs entries
KVM: arm64: Fix missing traps of guest accesses to the MPAM registers
arm64: cpufeature: discover CPU support for MPAM
arm64: head.S: Initialise MPAM EL2 registers and disable traps
arm64/sysreg: Convert existing MPAM sysregs and add the remaining entries
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/psci-1.3:
: PSCI v1.3 support, courtesy of David Woodhouse
:
: Bump KVM's PSCI implementation up to v1.3, with the added bonus of
: implementing the SYSTEM_OFF2 call. Like other system-scoped PSCI calls,
: this gets relayed to userspace for further processing with a new
: KVM_SYSTEM_EVENT_SHUTDOWN flag.
:
: As an added bonus, implement client-side support for hibernation with
: the SYSTEM_OFF2 call.
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
KVM: arm64: nvhe: Pass through PSCI v1.3 SYSTEM_OFF2 call
KVM: selftests: Add test for PSCI SYSTEM_OFF2
KVM: arm64: Add support for PSCI v1.2 and v1.3
KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation
firmware/psci: Add definitions for PSCI v1.3 specification
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|