summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-06-19btrfs: print assertion failure report and stack trace from the same lineDavid Sterba
Assertions reports are split into two parts, the exact file and location of the condition and then the stack trace printed from btrfs_assertfail(). This means all the stack traces report the same line and this is what's typically reported by various tools, making it harder to distinguish the reports. [403.2467] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4259 [403.2479] ------------[ cut here ]------------ [403.2484] kernel BUG at fs/btrfs/messages.c:259! [403.2488] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [403.2493] CPU: 2 PID: 23202 Comm: umount Not tainted 6.2.0-rc4-default+ #67 [403.2499] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014 [403.2509] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs] ... [403.2595] Call Trace: [403.2598] <TASK> [403.2601] btrfs_free_block_groups.cold+0x52/0xae [btrfs] [403.2608] close_ctree+0x6c2/0x761 [btrfs] [403.2613] ? __wait_for_common+0x2b8/0x360 [403.2618] ? btrfs_cleanup_one_transaction.cold+0x7a/0x7a [btrfs] [403.2626] ? mark_held_locks+0x6b/0x90 [403.2630] ? lockdep_hardirqs_on_prepare+0x13d/0x200 [403.2636] ? __call_rcu_common.constprop.0+0x1ea/0x3d0 [403.2642] ? trace_hardirqs_on+0x2d/0x110 [403.2646] ? __call_rcu_common.constprop.0+0x1ea/0x3d0 [403.2652] generic_shutdown_super+0xb0/0x1c0 [403.2657] kill_anon_super+0x1e/0x40 [403.2662] btrfs_kill_super+0x25/0x30 [btrfs] [403.2668] deactivate_locked_super+0x4c/0xc0 By making btrfs_assertfail a macro we'll get the same line number for the BUG output: [63.5736] assertion failed: 0, in fs/btrfs/super.c:1572 [63.5758] ------------[ cut here ]------------ [63.5782] kernel BUG at fs/btrfs/super.c:1572! [63.5807] invalid opcode: 0000 [#2] PREEMPT SMP KASAN [63.5831] CPU: 0 PID: 859 Comm: mount Tainted: G D 6.3.0-rc7-default+ #2062 [63.5868] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 [63.5905] RIP: 0010:btrfs_mount+0x24/0x30 [btrfs] [63.5964] RSP: 0018:ffff88800e69fcd8 EFLAGS: 00010246 [63.5982] RAX: 000000000000002d RBX: ffff888008fc1400 RCX: 0000000000000000 [63.6004] RDX: 0000000000000000 RSI: ffffffffb90fd868 RDI: ffffffffbcc3ff20 [63.6026] RBP: ffffffffc081b200 R08: 0000000000000001 R09: ffff88800e69fa27 [63.6046] R10: ffffed1001cd3f44 R11: 0000000000000001 R12: ffff888005a3c370 [63.6062] R13: ffffffffc058e830 R14: 0000000000000000 R15: 00000000ffffffff [63.6081] FS: 00007f7b3561f800(0000) GS:ffff88806c600000(0000) knlGS:0000000000000000 [63.6105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [63.6120] CR2: 00007fff83726e10 CR3: 0000000002a9e000 CR4: 00000000000006b0 [63.6137] Call Trace: [63.6143] <TASK> [63.6148] legacy_get_tree+0x80/0xd0 [63.6158] vfs_get_tree+0x43/0x120 [63.6166] do_new_mount+0x1f3/0x3d0 [63.6176] ? do_add_mount+0x140/0x140 [63.6187] ? cap_capable+0xa4/0xe0 [63.6197] path_mount+0x223/0xc10 This comes at a cost of bloating the final btrfs.ko module due all the inlining, as long as assertions are compiled in. This is a must for debugging builds but this is often enabled on release builds too. Release build: text data bss dec hex filename 1251676 20317 16088 1288081 13a791 pre/btrfs.ko 1260612 29473 16088 1306173 13ee3d post/btrfs.ko DELTA: +8936 CC: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-19selftests/powerpc/dexcr: Add DEXCR status utility lsdexcrBenjamin Gray
Add a utility 'lsdexcr' to print the current DEXCR status. Useful for quickly checking the status such as when debugging test failures or verifying the new default DEXCR does what you want (for userspace at least). Example output: # ./lsdexcr uDEXCR: 04000000 (NPHIE) HDEXCR: 00000000 Effective: 04000000 (NPHIE) SBHE (0): clear (Speculative branch hint enable) IBRTPD (3): clear (Indirect branch recurrent target ...) SRAPD (4): clear (Subroutine return address ...) NPHIE * (5): set (Non-privileged hash instruction enable) PHIE (6): clear (Privileged hash instruction enable) DEXCR[NPHIE] enabled: hashst/hashchk working Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-12-bgray@linux.ibm.com
2023-06-19selftests/powerpc/dexcr: Add hashst/hashchk testBenjamin Gray
Test the kernel DEXCR[NPHIE] interface and hashchk exception handling. Introduces with it a DEXCR utils library for common DEXCR operations. Volatile is used to prevent the compiler optimising away the signal tests. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-11-bgray@linux.ibm.com
2023-06-19selftests/powerpc: Add more utility macrosBenjamin Gray
Adds _MSG assertion variants to provide more context behind why a failure occurred. Also include unistd.h for _exit() and stdio.h for fprintf(), and move ARRAY_SIZE macro to utils.h. The _MSG variants and ARRAY_SIZE will be used by the following DEXCR selftests. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230616034846.311705-10-bgray@linux.ibm.com
2023-06-18test_sysclt: Test for registering a mount pointJoel Granados
Test that target gets created by register_sysctl_mount_point and that no additional target can be created "on top" of a permanently empty sysctl table. Create a mount point target (mnt) in the sysctl test driver; try to create another on top of that (mnt_error). Output an error if "mnt_error" is present when we run the sysctl selftests. Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-06-18test_sysctl: Add an option to prevent test skipJoel Granados
Tests were being skipped because the target was not present. Add a flag that controls whether to skip a test based on the presence of the target. Actually skip tests in the test_case function with a "return" instead of a "continue". Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-06-18test_sysctl: Add an unregister sysctl testJoel Granados
Add a test that checks that the unregistered directory is removed from /proc/sys/debug Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-06-18test_sysctl: Fix test metadata gettersJoel Granados
The functions get_test_{count,enabled,target} use awk to get the N'th field in the ALL_TESTS variable. A variable with leading zeros (e.g. 0009) is misinterpreted as an entire line instead of the N'th field. Remove the leading zeros so this does not happen. We can now use the helper in tests 6, 7 and 8. Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-06-16perf pmus: Check if we can encode the PMU number in perf_event_attr.typeArnaldo Carvalho de Melo
In some architectures we can't encode the PMU number in perf_event_attr.type and thus can't just ask for the same event in multiple CPUs (and thus PMUs), that is what we want in hybrid systems but we can't when that encoding isn't understood by the kernel, such as in ARM64's big.LITTLE. If that is the case, fallback to the previous behaviour till we find a better solution to have consistent output accross architectures with hybrid CPU configurations. Co-developed-with: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: John Garry <john.g.garry@oracle.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/linux-perf-users/ZIzYgImv61OGK1wA@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf print-events: Export is_event_supported()Arnaldo Carvalho de Melo
Will be used when checking if we can encode the PMU number in perf_event_attr.type, part of the logic to use in hybrid systems (multiple types of CPUs, such as Intel's (Alder Lake, etc) or ARM's big.LITTLE). Co-developed-with: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: John Garry <john.g.garry@oracle.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/linux-perf-users/ZIzYgImv61OGK1wA@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf test record+probe_libc_inet_pton.sh: Use "grep -F" instead of ↵Tiezhu Yang
obsolescent "fgrep" There exists the following warning when executing 'perf test record+probe_libc_inet_pton.sh': fgrep: warning: fgrep is obsolescent; using grep -F This is tested on Fedora 38, the version of grep is 3.8, the latest version of grep claims the fgrep is obsolete, use "grep -F" instead of "fgrep" to silence the warning. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: loongson-kernel@lists.loongnix.cn Link: https://lore.kernel.org/r/1686880567-30017-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf mem: Scan all PMUs instead of just core onesRavi Bangoria
Scanning only core PMUs is not sufficient on platforms like AMD since perf mem on AMD uses IBS OP PMU, which is independent of core PMU. Scan all PMUs instead of just core PMUs. There should be negligible performance overhead because of scanning all PMUs, so we should be okay. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20230615051700.1833-4-ravi.bangoria@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf mem amd: Fix perf_pmus__num_mem_pmus()Ravi Bangoria
perf mem/c2c on AMD internally uses IBS OP PMU, not the core PMU. Also, AMD platforms does not have heterogeneous PMUs. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20230615051700.1833-3-ravi.bangoria@amd.com [ Added the improved comment for perf_pmus__num_mem_pmus() as b4 didn't from the per-patch (not series) newer version ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf pmus: Describe semantics of 'core_pmus' and 'other_pmus'Ravi Bangoria
Notion of 'core_pmus' and 'other_pmus' are independent of hw core and uncore pmus. For example, AMD IBS PMUs are present in each SMT-thread but they belongs to 'other_pmus'. Add a comment describing what these list contains and how they are treated. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20230615051700.1833-2-ravi.bangoria@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf stat: Show average value on multiple runsNamhyung Kim
When -r option is used, perf stat runs the command multiple times and update stats in the evsel->stats.res_stats for global aggregation. But the value is never used and the value it prints at the end is just the value from the last run. I think we should print the average number of multiple runs. Add evlist__copy_res_stats() to update the aggr counter (for display) using the values in the evsel->stats.res_stats. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230616073211.1057936-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf stat: Reset aggr stats for each runNamhyung Kim
When it runs multiple times with -r option, it missed to reset the aggregation counters and the values were added up. The aggregation count has the values to be printed in the end. It should reset the counters at the beginning of each run. But the current code does that only when -I/--interval-print option is given. Fixes: 91f85f98da7ab8c3 ("perf stat: Display event stats using aggr counts") Reported-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230616073211.1057936-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf test: fix failing test cases on linux-next for s390Thomas Richter
In linux-next tree the many test cases fail on s390x when running the perf test suite, sometime the perf tool dumps core. Output before: 6.1: Test event parsing : FAILED! 10.3: Parsing of PMU event table metrics : FAILED! 10.4: Parsing of PMU event table metrics with fake PMUs: FAILED! 17: Setup struct perf_event_attr : FAILED! 24: Number of exit events of a simple workload : FAILED! 26: Object code reading : FAILED! 28: Use a dummy software event to keep tracking : FAILED! 35: Track with sched_switch : FAILED! 42.3: BPF prologue generation : FAILED! 66: Parse and process metrics : FAILED! 68: Event expansion for cgroups : FAILED! 69.2: Perf time to TSC : FAILED! 74: build id cache operations : FAILED! 86: Zstd perf.data compression/decompression : FAILED! 87: perf record tests : FAILED! 106: Test java symbol : FAILED! The reason for all these failure is a missing PMU. On s390x the PMU is named cpum_cf which is not detected as core PMU. A similar patch was added before, see commit 9bacbced0e32204d ("perf list: Add s390 support for detailed PMU event description") which got lost during the recent reworks. Add it again. Output after: 10.2: PMU event map aliases : FAILED! 42.3: BPF prologue generation : FAILED! Most test cases now work and there is not core dump anymore. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/r/20230616081437.1932003-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf annotate: Work with vmlinux outside symfsVincent Whitchurch
It is currently possible to use --symfs along with a vmlinux which lies outside of the symfs by passing an absolute path to --vmlinux, thanks to the check in dso__load_vmlinux() which handles this explicitly. However, the annotate code lacks this check and thus 'perf annotate' does not work ("Internal error: Invalid -1 error code") for kernel functions with this combination. Add the missing handling. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel@axis.com Link: https://lore.kernel.org/r/20221125114210.2353820-1-vincent.whitchurch@axis.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf vendor events arm64: Add default tags for Hisi hip08 L1 metricsKan Liang
Add the default tags for Hisi hip08 as well. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230616031420.3751973-6-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf test: Add test case for the standard 'perf stat' outputKan Liang
Add a new test case to verify the standard 'perf stat' output with different options. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230616031420.3751973-5-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf test: Move all the check functions of stat CSV output to libKan Liang
These functions can be shared with the stat std output test. There is no functional change. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230616031420.3751973-4-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf stat: New metricgroup output for the default modeKan Liang
In the default mode, the current output of the metricgroup include both events and metrics, which is not necessary and just makes the output hard to read. Since different ARCHs (even different generations in the same ARCH) may use different events. The output also vary on different platforms. For a metricgroup, only outputting the value of each metric is good enough. Add a new field default_metricgroup in evsel to indicate an event of the default metricgroup. For those events, printout() should print the metricgroup name rather than each event. Add perf_stat__skip_metric_event() to skip the evsel in the Default metricgroup, if it's not running or not the metric event. Add print_metricgroup_header_t to pass the functions which print the display name of each metricgroup in the Default metricgroup. Support all three output methods. Factor out perf_stat__print_shadow_stats_metricgroup() to print out each metrics. On SPR: Before: ./perf_old stat sleep 1 Performance counter stats for 'sleep 1': 0.54 msec task-clock:u # 0.001 CPUs utilized 0 context-switches:u # 0.000 /sec 0 cpu-migrations:u # 0.000 /sec 68 page-faults:u # 125.445 K/sec 540,970 cycles:u # 0.998 GHz 556,325 instructions:u # 1.03 insn per cycle 123,602 branches:u # 228.018 M/sec 6,889 branch-misses:u # 5.57% of all branches 3,245,820 TOPDOWN.SLOTS:u # 18.4 % tma_backend_bound # 17.2 % tma_retiring # 23.1 % tma_bad_speculation # 41.4 % tma_frontend_bound 564,859 topdown-retiring:u 1,370,999 topdown-fe-bound:u 603,271 topdown-be-bound:u 744,874 topdown-bad-spec:u 12,661 INT_MISC.UOP_DROPPING:u # 23.357 M/sec 1.001798215 seconds time elapsed 0.000193000 seconds user 0.001700000 seconds sys After: $ ./perf stat sleep 1 Performance counter stats for 'sleep 1': 0.51 msec task-clock:u # 0.001 CPUs utilized 0 context-switches:u # 0.000 /sec 0 cpu-migrations:u # 0.000 /sec 68 page-faults:u # 132.683 K/sec 545,228 cycles:u # 1.064 GHz 555,509 instructions:u # 1.02 insn per cycle 123,574 branches:u # 241.120 M/sec 6,957 branch-misses:u # 5.63% of all branches TopdownL1 # 17.5 % tma_backend_bound # 22.6 % tma_bad_speculation # 42.7 % tma_frontend_bound # 17.1 % tma_retiring TopdownL2 # 21.8 % tma_branch_mispredicts # 11.5 % tma_core_bound # 13.4 % tma_fetch_bandwidth # 29.3 % tma_fetch_latency # 2.7 % tma_heavy_operations # 14.5 % tma_light_operations # 0.8 % tma_machine_clears # 6.1 % tma_memory_bound 1.001712086 seconds time elapsed 0.000151000 seconds user 0.001618000 seconds sys Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230616031420.3751973-3-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16perf metrics: Sort the Default metricgroupKan Liang
The new default mode will print the metrics as a metric group. The metrics from the same metric group must be adjacent to each other in the metric list. But the metric_list_cmp() sorts metrics by the number of events. Add a new sort for the Default metricgroup, which sorts by default_metricgroup_name and metric_name. Add is_default in the struct metric_event to indicate that it's from the Default metricgroup. Store the displayed metricgroup name of the Default metricgroup into the metric expr for output. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230616031420.3751973-2-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-16selftests: gpio: gpio-sim: Use same variable name for sysfs pathnameAndy Shevchenko
SYSFS_PATH can be used locally and globally, especially that has the same content. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-06-16KVM: s390: selftests: add selftest for CMMA migrationNico Boehr
Add a selftest for CMMA migration on s390. The tests cover: - interaction of dirty tracking and migration mode, see my recent patch "KVM: s390: disable migration mode when dirty tracking is disabled" [1], - several invalid calls of KVM_S390_GET_CMMA_BITS, for example: invalid flags, CMMA support off, with/without peeking - ensure KVM_S390_GET_CMMA_BITS initally reports all pages as dirty, - ensure KVM_S390_GET_CMMA_BITS properly skips over holes in memslots, but also non-dirty pages Note that without the patch at [1] and the small fix in this series, the selftests will fail. [1] https://lore.kernel.org/all/20230127140532.230651-2-nrb@linux.ibm.com/ Signed-off-by: Nico Boehr <nrb@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20230324145424.293889-3-nrb@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> [frankja@linux.ibm.com: squashed 20230606150510.671301-1-nrb@linux.ibm.com / "KVM: s390: selftests: CMMA: don't run if CMMA not supported"] Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2023-06-15selftests: net: fcnal-test: check if FIPS mode is enabledMagali Lemes
There are some MD5 tests which fail when the kernel is in FIPS mode, since MD5 is not FIPS compliant. Add a check and only run those tests if FIPS mode is not enabled. Fixes: f0bee1ebb5594 ("fcnal-test: Add TCP MD5 tests") Fixes: 5cad8bce26e01 ("fcnal-test: Add TCP MD5 tests for VRF") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Magali Lemes <magali.lemes@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15selftests: net: vrf-xfrm-tests: change authentication and encryption algosMagali Lemes
The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede) algorithms for performing authentication and encryption, respectively. This causes the tests to fail when fips=1 is set, since these algorithms are not allowed in FIPS mode. Therefore, switch from hmac(md5) and cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant. Fixes: 3f251d741150 ("selftests: Add tests for vrf and xfrms") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Magali Lemes <magali.lemes@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15selftests: net: tls: check if FIPS mode is enabledMagali Lemes
TLS selftests use the ChaCha20-Poly1305 and SM4 algorithms, which are not FIPS compliant. When fips=1, this set of tests fails. Add a check and only run these tests if not in FIPS mode. Fixes: 4f336e88a870 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests") Fixes: e506342a03c7 ("selftests/tls: add SM4 GCM/CCM to tls selftests") Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Magali Lemes <magali.lemes@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15selftests/harness: allow tests to be skipped during setupMagali Lemes
Before executing each test from a fixture, FIXTURE_SETUP is run once. When SKIP is used in FIXTURE_SETUP, the setup function returns early but the test still proceeds to run, unless another SKIP macro is used within the test definition, leading to some code repetition. Therefore, allow tests to be skipped directly from the setup function. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Magali Lemes <magali.lemes@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/mlx5/driver.h 617f5db1a626 ("RDMA/mlx5: Fix affinity assignment") dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") 425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not") 45b1a1227a7a ("mptcp: introduces more address related mibs") 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15Merge tag 'net-6.4-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and netfilter. Selftests excluded - we have 58 patches and diff of +442/-199, which isn't really small but perhaps with the exception of the WiFi locking change it's old(ish) bugs. We have no known problems with v6.4. The selftest changes are rather large as MPTCP folks try to apply Greg's guidance that selftest from torvalds/linux should be able to run against stable kernels. Last thing I should call out is the DCCP/UDP-lite deprecation notices. We are fairly sure those are dead, but if we're wrong reverting them back in won't be fun. Current release - regressions: - wifi: - cfg80211: fix double lock bug in reg_wdev_chan_valid() - iwlwifi: mvm: spin_lock_bh() to fix lockdep regression Current release - new code bugs: - handshake: remove fput() that causes use-after-free Previous releases - regressions: - sched: cls_u32: fix reference counter leak leading to overflow - sched: cls_api: fix lockup on flushing explicitly created chain Previous releases - always broken: - nf_tables: integrate pipapo into commit protocol - nf_tables: incorrect error path handling with NFT_MSG_NEWRULE, fix dangling pointer on failure - ping6: fix send to link-local addresses with VRF - sched: act_pedit: parse L3 header for L4 offset, the skb may not have the offset saved - sched: act_ct: fix promotion of offloaded unreplied tuple - sched: refuse to destroy an ingress and clsact Qdiscs if there are lockless change operations in flight - wifi: mac80211: fix handful of bugs in multi-link operation - ipvlan: fix bound dev checking for IPv6 l3s mode - eth: enetc: correct the indexes of highest and 2nd highest TCs - eth: ice: fix XDP memory leak when NIC is brought up and down Misc: - add deprecation notices for UDP-lite and DCCP - selftests: mptcp: skip tests not supported by old kernels - sctp: handle invalid error codes without calling BUG()" * tag 'net-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) dccp: Print deprecation notice. udplite: Print deprecation notice. octeon_ep: Add missing check for ioremap selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_open net: tipc: resize nlattr array to correct size sfc: fix XDP queues mode with legacy IRQ net: macsec: fix double free of percpu stats net: lapbether: only support ethernet devices MAINTAINERS: add reviewers for SMC Sockets s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit() net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo frames net/sched: cls_api: Fix lockup on flushing explicitly created chain ice: Fix ice module unload net/handshake: remove fput() that causes use-after-free selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate step net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs net/sched: act_ct: Fix promotion of offloaded unreplied tuple wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression ...
2023-06-15pert tests: Update metric-value for perf stat JSON outputKan Liang
There may be multiplexing triggered, e.g., e-core of ADL. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230615135315.3662428-7-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-15perf stat,jevents: Introduce Default tags for the default modeKan Liang
Introduce a new metricgroup, Default, to tag all the metric groups which will be collected in the default mode. Add a new field, DefaultMetricgroupName, in the JSON file to indicate the real metric group name. It will be printed in the default output to replace the event names. There is nothing changed for the output format. On SPR, both TopdownL1 and TopdownL2 are displayed in the default output. On ARM, Intel ICL and later platforms (before SPR), only TopdownL1 is displayed in the default output. Suggested-by: Stephane Eranian <eranian@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230615135315.3662428-4-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-15perf metric: JSON flag to default metric groupKan Liang
For the default output, the default metric group could vary on different platforms. For example, on SPR, the TopdownL1 and TopdownL2 metrics should be displayed in the default mode. On ICL, only the TopdownL1 should be displayed. Add a flag so we can tag the default metric group for different platforms rather than hack the perf code. The flag is added to Intel TopdownL1 since ICL and ADL, TopdownL2 metrics since SPR. Add a new field, DefaultMetricgroupName, in the JSON file to indicate the real metric group name. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230615135315.3662428-3-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-15perf evsel: Fix the annotation for hardware events on hybridKan Liang
The annotation for hardware events is wrong on hybrid. For example, # ./perf stat -a sleep 1 Performance counter stats for 'system wide': 32,148.85 msec cpu-clock # 32.000 CPUs utilized 374 context-switches # 11.633 /sec 33 cpu-migrations # 1.026 /sec 295 page-faults # 9.176 /sec 18,979,960 cpu_core/cycles/ # 590.378 K/sec 261,230,783 cpu_atom/cycles/ # 8.126 M/sec (54.21%) 17,019,732 cpu_core/instructions/ # 529.404 K/sec 38,020,470 cpu_atom/instructions/ # 1.183 M/sec (63.36%) 3,296,743 cpu_core/branches/ # 102.546 K/sec 6,692,338 cpu_atom/branches/ # 208.167 K/sec (63.40%) 96,421 cpu_core/branch-misses/ # 2.999 K/sec 1,016,336 cpu_atom/branch-misses/ # 31.613 K/sec (63.38%) The hardware events have extended type on hybrid, but the evsel__match() doesn't take it into account. Filter the config on hybrid before checking. With the patch, # ./perf stat -a sleep 1 Performance counter stats for 'system wide': 32,139.90 msec cpu-clock # 32.003 CPUs utilized 343 context-switches # 10.672 /sec 32 cpu-migrations # 0.996 /sec 73 page-faults # 2.271 /sec 13,712,841 cpu_core/cycles/ # 0.000 GHz 258,301,691 cpu_atom/cycles/ # 0.008 GHz (54.20%) 12,428,163 cpu_core/instructions/ # 0.91 insn per cycle 37,786,557 cpu_atom/instructions/ # 2.76 insn per cycle (63.35%) 2,418,826 cpu_core/branches/ # 75.259 K/sec 6,965,962 cpu_atom/branches/ # 216.739 K/sec (63.38%) 72,150 cpu_core/branch-misses/ # 2.98% of all branches 1,032,746 cpu_atom/branch-misses/ # 42.70% of all branches (63.35%) Suggested-by: Ian Rogers <irogers@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230615135315.3662428-2-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-15perf srcline: Fix handling of inline functionsIan Rogers
We write an address then a ',' to addr2line. With inline data we generally get back (// are my comments): 0x1234 // address foo // function name foo.c:123 // filename:line bar // function name bar.c:123 // filename:line 0x000000000000000 // sentinel address created by ',' ?? // unknown function name ??:0 // unknown filename:line The code was assuming the inline data also had the address, which is incorrect. This means the first inline function name (bar above) needs to be checked to see if it is the sentinel, otherwise to be treated as a function name. The regression was caused by the addition of addresses as the kernel is reporting a symbol at address 0 (used by GNU binutils when it interprets ','). Committer testing: Using: # perf trace --call-graph=dwarf -e lock:contention_* <SNIP> 1244.615 TaskCon~ller #/2645281 lock:contention_begin(lock_addr: 0xffff8e6748da5ab0, flags: 2) __preempt_count_dec_and_test (inlined) trace_contention_begin (inlined) trace_contention_begin (inlined) rwsem_down_read_slowpath ([kernel.kallsyms]) __preempt_count_dec_and_test (inlined) trace_contention_begin (inlined) trace_contention_begin (inlined) rwsem_down_read_slowpath ([kernel.kallsyms]) __down_read_common (inlined) __down_read (inlined) down_read ([kernel.kallsyms]) arch_static_branch (inlined) static_key_false (inlined) __mmap_lock_trace_acquire_returned (inlined) mmap_read_lock (inlined) do_user_addr_fault ([kernel.kallsyms]) arch_local_irq_disable (inlined) handle_page_fault (inlined) exc_page_fault ([kernel.kallsyms]) asm_exc_page_fault ([kernel.kallsyms]) [0x4def008] (/usr/lib64/firefox/libxul.so) 1244.619 TaskCon~ller #/2645281 lock:contention_end(lock_addr: 0xffff8e6748da5ab0) __preempt_count_dec_and_test (inlined) trace_contention_end (inlined) trace_contention_end (inlined) rwsem_down_read_slowpath ([kernel.kallsyms]) __preempt_count_dec_and_test (inlined) trace_contention_end (inlined) trace_contention_end (inlined) rwsem_down_read_slowpath ([kernel.kallsyms]) __down_read_common (inlined) __down_read (inlined) down_read ([kernel.kallsyms]) arch_static_branch (inlined) static_key_false (inlined) __mmap_lock_trace_acquire_returned (inlined) mmap_read_lock (inlined) do_user_addr_fault ([kernel.kallsyms]) arch_local_irq_disable (inlined) handle_page_fault (inlined) exc_page_fault ([kernel.kallsyms]) asm_exc_page_fault ([kernel.kallsyms]) <SNIP> Fixes: 8dc26b6f718a8118 ("perf srcline: Make sentinel reading for binutils addr2line more robust") Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: llvm@lists.linux.dev Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230615025041.1982072-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-15selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSETAlex Maftei
Previously, timestamps were printed using "%lld.%u" which is incorrect for nanosecond values lower than 100,000,000 as they're fractional digits, therefore leading zeros are meaningful. This patch changes the format strings to "%lld.%09u" in order to add leading zeros to the nanosecond value. Fixes: 568ebc5985f5 ("ptp: add the PTP_SYS_OFFSET ioctl to the testptp program") Fixes: 4ec54f95736f ("ptp: Fix compiler warnings in the testptp utility") Fixes: 6ab0e475f1f3 ("Documentation: fix misc. warnings") Signed-off-by: Alex Maftei <alex.maftei@amd.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20230615083404.57112-1-alex.maftei@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15selftests: tty: add selftest for tty timestamp updatesMichal Sekletar
Add new test case which checks that timestamp updates on actual terminal character device (e.g. /dev/pts/0) happen even if the terminal is accessed via magic /dev/tty file. Signed-off-by: Michal Sekletar <msekleta@redhat.com> Message-ID: <20230613172107.78138-2-msekleta@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15Merge tag 'counter-updates-for-6.5a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next William writes: First set of Counter updates for the 6.5 cycle Biggest changes in this set include the introduction of a new Intel 8254 interface library module and the refactoring of the existing 104-quad-8 modules to migrate it to the regmap API. Some other minor cleanups touching tools/counter and stm32-timer-cnt are also present. Changes * 104-quad-8 - Remove reference in Kconfig to 25-bit counter value - Utilize bitfield access macros - Refactor to buffer states for CMR, IOR, and IDR - Utilize helper functions to handle PR, FLAG and PSC - Migrate to the regmap API * i8254 - Introduce the Intel 8254 interface library module * stm32-timer-cnt - Reset TIM_TISEL to its default value in probe * tools/counter - Add .gitignore - Remove lingering 'include' directories on make clean * tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: i8254: Introduce the Intel 8254 interface library module counter: 104-quad-8: Migrate to the regmap API counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR counter: 104-quad-8: Utilize bitfield access macros tools/counter: Makefile: Remove lingering 'include' directories on make clean tools/counter: Add .gitignore counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
2023-06-15tools: ynl: work around stale system headersJakub Kicinski
The inability to include the uAPI headers directly in tools/ is one of the bigger annoyances of compiling user space code. Most projects trade the pain for smaller inconvenience of having to copy the headers under tools/include. In case of netlink headers I think that we can avoid both. Netlink family headers are simple and should be self-contained. We can try to twiddle the Makefile a little to force-include just the family header, and use system headers for the rest. This works fairly well. There are two warts - for some reason if we specify -include $path/family.h as a compilation flag, the #ifdef header guard does not seem to work. So we need to throw the guard in on the command line as well. Seems like GCC detects that the header is different and tries to include both. Second problem is that make wants hash sign to be escaped or not depending on the version. Sigh. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-14perf srcline: Add a timeout to reading from addr2lineIan Rogers
addr2line may fail to send expected values causing perf to wait indefinitely. Add a 1 second timeout (twice the timeout for reading from /proc/pid/maps) so that such reads don't cause perf to appear to lock up. There are already checks that the file for addr2line contains a debug section but this isn't always sufficient. The problem was observed when a valid elf file would set the configuration for binutils addr2line, then a later read of vmlinux with ELF debug sections would cause a failing write/read which would block indefinitely. As a service to future readers, if the io hits eof or an error, cleanup the addr2line process. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong1@huawei.com> Link: https://lore.kernel.org/r/20230608061812.3715566-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-14tools api: Add simple timeout to io readIan Rogers
In situations like reading from a pipe it can be useful to have a timeout so that the caller doesn't block indefinitely. Implement a simple one based on poll. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong1@huawei.com> Link: http://lore.kernel.org/lkml/20230608061812.3715566-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-14perf tool x86: Fix perf_env memory leakIan Rogers
Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 #2 0x556701d70589 in perf_env__cpuid util/env.c:465 #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 #5 0x556701d8f78b in evsel__config util/evsel.c:1366 #6 0x556701ef5872 in evlist__config util/record.c:108 #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 #8 0x556701cacd07 in run_test tests/builtin-test.c:236 #9 0x556701cacfac in test_and_print tests/builtin-test.c:265 #10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 #11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 #12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 #13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 #14 0x556701d3be90 in run_argv tools/perf/perf.c:421 #15 0x556701d3c3f8 in main tools/perf/perf.c:537 #16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cbdb3ff36eb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Ravi Bangoria <ravi.bangoria@amd.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20230613235416.1650755-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-14selftests/user_events: Adapt dyn_test to non-persist eventsBeau Belgrave
Now that user_events does not honor persist events the dynamic_events file cannot be easily used to test parsing and matching cases. Update dyn_test to use the direct ABI file instead of dynamic_events so that we still have testing coverage until persist events and dynamic_events file integration has been decided. Link: https://lkml.kernel.org/r/20230614163336.5797-6-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14selftests/user_events: Ensure auto cleanup works as expectedBeau Belgrave
User events now auto cleanup upon the last reference put. Update ftrace_test to ensure this works as expected. Ensure EBUSY delays while event is being deleted do not cause transient failures by waiting and re-attempting. Link: https://lkml.kernel.org/r/20230614163336.5797-5-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14selftests/user_events: Add perf self-test for empty arguments eventssunliming
Tests to ensure events that has empty arguments can input trace record correctly when using perf. Link: https://lkml.kernel.org/r/20230606062027.1008398-5-sunliming@kylinos.cn Acked-by: Beau Belgrave <beaub@linux.microsoft.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: sunliming <sunliming@kylinos.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14selftests/user_events: Clear the events after perf self-testsunliming
When the self test is completed, perf self-test left the user events not to be cleared. Clear the events by unregister and delete the event. Link: https://lkml.kernel.org/r/20230606062027.1008398-4-sunliming@kylinos.cn Acked-by: Beau Belgrave <beaub@linux.microsoft.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: sunliming <sunliming@kylinos.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14selftests/user_events: Add ftrace self-test for empty arguments eventssunliming
Tests to ensure events that has empty arguments can input trace record correctly when using ftrace. Link: https://lkml.kernel.org/r/20230606062027.1008398-3-sunliming@kylinos.cn Acked-by: Beau Belgrave <beaub@linux.microsoft.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: sunliming <sunliming@kylinos.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14tracing/user_events: Prevent same name but different args eventsunliming
User processes register name_args for events. If the same name but different args event are registered. The trace outputs of second event are printed as the first event. This is incorrect. Return EADDRINUSE back to the user process if the same name but different args event has being registered. Link: https://lore.kernel.org/linux-trace-kernel/20230529032100.286534-1-sunliming@kylinos.cn Signed-off-by: sunliming <sunliming@kylinos.cn> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate stepDanielle Ratson
Setting the IPv6 address generation mode of a net device during its creation never worked, but after commit b0ad3c179059 ("rtnetlink: call validate_linkmsg in rtnl_create_link") it explicitly fails [1]. The failure is caused by the fact that validate_linkmsg() is called before the net device is registered, when it still does not have an 'inet6_dev'. Likewise, raising the net device before setting the address generation mode is meaningless, because by the time the mode is set, the address has already been generated. Therefore, fix the test to first create the net device, then set its IPv6 address generation mode and finally bring it up. [1] # ip link add name mydev addrgenmode eui64 type dummy RTNETLINK answers: Address family not supported by protocol Fixes: ba95e7930957 ("selftests: forwarding: hw_stats_l3: Add a new test") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/f3b05d85b2bc0c3d6168fe8f7207c6c8365703db.1686580046.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 05:01:57 +0000