| Age | Commit message (Collapse) | Author |
|---|
|
Test 6273: Add cgroup filter with cmp ematch u8/link layer and drop action
Test 4721: Add cgroup filter with cmp ematch u8/link layer with trans
flag and pass action
Test d392: Add cgroup filter with cmp ematch u16/link layer and pipe action
Test 0234: Add cgroup filter with cmp ematch u32/link layer and miltiple
actions
Test 8499: Add cgroup filter with cmp ematch u8/network layer and pass
action
Test b273: Add cgroup filter with cmp ematch u8/network layer with trans
flag and drop action
Test 1934: Add cgroup filter with cmp ematch u16/network layer and pipe
action
Test 2733: Add cgroup filter with cmp ematch u32/network layer and
miltiple actions
Test 3271: Add cgroup filter with NOT cmp ematch rule and pass action
Test 2362: Add cgroup filter with two ANDed cmp ematch rules and single
action
Test 9993: Add cgroup filter with two ORed cmp ematch rules and single
action
Test 2331: Add cgroup filter with two ANDed cmp ematch rules and one ORed
ematch rule and single action
Test 3645: Add cgroup filter with two ANDed cmp ematch rules and one NOT
ORed ematch rule and single action
Test b124: Add cgroup filter with u32 ematch u8/zero offset and drop
action
Test 7381: Add cgroup filter with u32 ematch u8/zero offset and invalid
value >0xFF
Test 2231: Add cgroup filter with u32 ematch u8/positive offset and drop
action
Test 1882: Add cgroup filter with u32 ematch u8/invalid mask >0xFF
Test 1237: Add cgroup filter with u32 ematch u8/missing offset
Test 3812: Add cgroup filter with u32 ematch u8/missing AT keyword
Test 1112: Add cgroup filter with u32 ematch u8/missing value
Test 3241: Add cgroup filter with u32 ematch u8/non-numeric value
Test e231: Add cgroup filter with u32 ematch u8/non-numeric mask
Test 4652: Add cgroup filter with u32 ematch u8/negative offset and pass
Test 1331: Add cgroup filter with u32 ematch u16/zero offset and pipe
action
Test e354: Add cgroup filter with u32 ematch u16/zero offset and invalid
value >0xFFFF
Test 3538: Add cgroup filter with u32 ematch u16/positive offset and drop
action
Test 4576: Add cgroup filter with u32 ematch u16/invalid mask >0xFFFF
Test b842: Add cgroup filter with u32 ematch u16/missing offset
Test c924: Add cgroup filter with u32 ematch u16/missing AT keyword
Test cc93: Add cgroup filter with u32 ematch u16/missing value
Test 123c: Add cgroup filter with u32 ematch u16/non-numeric value
Test 3675: Add cgroup filter with u32 ematch u16/non-numeric mask
Test 1123: Add cgroup filter with u32 ematch u16/negative offset and drop
action
Test 4234: Add cgroup filter with u32 ematch u16/nexthdr+ offset and pass
action
Test e912: Add cgroup filter with u32 ematch u32/zero offset and pipe
action
Test 1435: Add cgroup filter with u32 ematch u32/positive offset and drop
action
Test 1282: Add cgroup filter with u32 ematch u32/missing offset
Test 6456: Add cgroup filter with u32 ematch u32/missing AT keyword
Test 4231: Add cgroup filter with u32 ematch u32/missing value
Test 2131: Add cgroup filter with u32 ematch u32/non-numeric value
Test f125: Add cgroup filter with u32 ematch u32/non-numeric mask
Test 4316: Add cgroup filter with u32 ematch u32/negative offset and drop
action
Test 23ae: Add cgroup filter with u32 ematch u32/nexthdr+ offset and pipe
action
Test 23a1: Add cgroup filter with canid ematch and single SFF
Test 324f: Add cgroup filter with canid ematch and single SFF with mask
Test 2576: Add cgroup filter with canid ematch and multiple SFF
Test 4839: Add cgroup filter with canid ematch and multiple SFF with masks
Test 6713: Add cgroup filter with canid ematch and single EFF
Test ab9d: Add cgroup filter with canid ematch and multiple EFF with masks
Test 5349: Add cgroup filter with canid ematch and a combination of
SFF/EFF
Test c934: Add cgroup filter with canid ematch and a combination of
SFF/EFF with masks
Test 4319: Replace cgroup filter with diffferent match
Test 4636: Delete cgroup filter
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test 23c3: Add cBPF filter with valid bytecode
Test 1563: Add cBPF filter with invalid bytecode
Test 2334: Add eBPF filter with valid object-file
Test 2373: Add eBPF filter with invalid object-file
Test 4423: Replace cBPF bytecode
Test 5122: Delete cBPF filter
Test e0a9: List cBPF filters
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since 1b620d539ccc ("kbuild: disable header exports for UML in a
straightforward way"), installing headers fails on UML, so just disable
installing them, since they're not needed anyway on the architecture.
Fixes: b438b3b8d6e6 ("wireguard: selftests: support UML")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a regression test for commit 592335a4164c ("bonding: accept
unsolicited NA message") and commit b7f14132bf58 ("bonding: use unspecified
address if no available link local address"). When the bond interface
up and no available link local address, unspecified address(::) is used to
send the NS message. The unsolicited NA message should also be accepted
for validation.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20220920033047.173244-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve reverts from Kees Cook:
"The recent work to support time namespace unsharing turns out to have
some undesirable corner cases, so rather than allowing the API to stay
exposed for another release, it'd be best to remove it ASAP, with the
replacement getting another cycle of testing. Nothing is known to use
this yet, so no userspace breakage is expected.
For more details, see:
https://lore.kernel.org/lkml/ed418e43ad28b8688cfea2b7c90fce1c@ispras.ru
Summary:
- Remove the recent 'unshare time namespace on vfork+exec' feature
(Andrei Vagin)"
* tag 'execve-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "fs/exec: allow to unshare a time namespace on vfork+exec"
Revert "selftests/timens: add a test for vfork+exit"
|
|
Add IPv4 and IPv6 test cases for unresolved multicast routes, testing
that queued packets are forwarded after installing a matching (S, G)
route.
The test cases can be used to reproduce the bugs fixed in "ipmr: Always
call ip{,6}_mr_forward() from RCU read-side critical section".
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This selftest is designed for testing the support of NEXT-C-SID flavor
for SRv6 End behavior. It instantiates a virtual network composed of
several nodes: hosts and SRv6 routers. Each node is realized using a
network namespace that is properly interconnected to others through veth
pairs.
The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged
by hosts for communicating with each other. Such routers i) apply
different SRv6 Policies to the traffic received from connected hosts,
considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID
compression mechanism for encoding several SRv6 segments within a single
128-bit SID address, referred to as a Compressed SID (C-SID) container.
The NEXT-C-SID is provided as a "flavor" of the SRv6 End behavior,
enabling it to properly process the C-SID containers. The correct
execution of the enabled NEXT-C-SID SRv6 End behavior is verified
through reachability tests carried out between hosts belonging to the
same VPN.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The previous patch added a test which can be used instead of qos_burst.sh.
Remove this test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an equivalent test to qos_burst, the test's purpose is same, but the
new test uses simpler topology and does not require forcing low speed.
In addition, it can be run Spectrum-2 and not only Spectrum-3+. The idea
is to use a shaper in order to limit the traffic and create congestion.
qos_burst test uses small pool, sends many small packets, and verify that
packets are not dropped, which means that many descriptors can be handled.
This test should check the change that commit c864769add96
("mlxsw: Configure descriptor buffers") pushed.
Instead, the new test tries to use more than 85% of maximum supported
descriptors. The idea is to use big pool (as much as the ASIC supports),
such that the pool size does not limit the traffic, then send many small
packets, which means that many descriptors are used, and check how many
packets the switch can handle.
The usage of shaper allows to run the test in all ASICs, regardless of
the CPU abilities, as it is able to create the congestion with low rate
of packets.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The maximum pool size is exposed via 'devlink sb' command. The next
patch will add a test which increases some pools to the maximum size.
Add a function to query the value.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
QOS tests create congestion and verify the switch behavior. To create
congestion, they need to have more traffic than the port can handle, so
some of them force 1Gbps speed.
The tests assume that 1Gbps speed is supported, otherwise, they will fail.
Spectrum-4 ASIC will not support this speed in all ports, so to be able
to run the tests there, some adjustments are required. Use shapers to limit
the traffic instead of forcing speed. Note that for several ports, the
speed configuration is just for autoneg issues, so shaper is not needed
instead.
The tests already use ETS qdisc as a root and RED qdiscs as children. Add
a new TBF shaper to limit the rate of traffic, and use it as a root qdisc,
then save the previous hierarchy of qdiscs under the new TBF root.
In some ASICs, the shapers do not limit the traffic as accurately as
forcing speed. To make the tests stable, allow the backlog size to be up to
+-10% of the threshold. The aim of the tests is to make sure that with
backlog << threshold, there are no drops, and that packets are dropped
somewhere in vicinity of the configured threshold.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
QOS tests create congestion and verify the switch behavior. To create
congestion, they need to have more traffic than the port can handle, so
some of them force 1Gbps speed.
The tests assume that 1Gbps speed is supported, otherwise, they will fail.
Spectrum-4 ASIC will not support this speed in all ports, so to be able
to run QOS tests there, some adjustments are required. Use shapers to
limit the traffic instead of forcing speed. Note that for several ports,
the speed configuration is just for autoneg issues, so shaper is not needed
instead.
In tests that already use shapers, set the existing shaper to be a child of
a new TBF shaper which is added as a root qdisc and acts as a port shaper.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test result message when test_task_storage_map_stress_lookup()
succeeds or is skipped. The test case can be skipped due to the choose
of preemption model in kernel config, so export skips in test_maps.c and
increase it when needed.
The following is the output of test_maps when the test case succeeds or
is skipped:
test_task_storage_map_stress_lookup:PASS
test_maps: OK, 0 SKIPPED
test_task_storage_map_stress_lookup SKIP (no CONFIG_PREEMPT)
test_maps: OK, 1 SKIPPED
Fixes: 73b97bc78b32 ("selftests/bpf: Test concurrent updates on bpf_task_storage_busy")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220919035714.2195144-1-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
* kvm-arm64/single-step-async-exception:
: .
: Single-step fixes from Reiji Watanabe:
:
: "This series fixes two bugs of single-step execution enabled by
: userspace, and add a test case for KVM_GUESTDBG_SINGLESTEP to
: the debug-exception test to verify the single-step behavior."
: .
KVM: arm64: selftests: Add a test case for KVM_GUESTDBG_SINGLESTEP
KVM: arm64: selftests: Refactor debug-exceptions to make it amenable to new test cases
KVM: arm64: Clear PSTATE.SS when the Software Step state was Active-pending
KVM: arm64: Preserve PSTATE.SS for the guest while single-step is enabled
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add a test case for KVM_GUESTDBG_SINGLESTEP to the debug-exceptions test.
The test enables single-step execution from userspace, and check if the
exit to userspace occurs for each instruction that is stepped.
Set the default number of the test iterations to a number of iterations
sufficient to always reproduce the problem that the previous patch fixes
on an Ampere Altra machine.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220917010600.532642-5-reijiw@google.com
|
|
test cases
Split up the current test into a helper, but leave the debug version
checking in main(), to make it convenient to add a new debug exception
test case in a subsequent patch.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220917010600.532642-4-reijiw@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Some small parisc architecture fixes for 6.0-rc6:
One patch lightens up a previous commit and thus unbreaks building the
debian kernel, which tries to configure a 64-bit kernel with the
ARCH=parisc environment variable set.
The other patches fixes asm/errno.h includes in the tools directory
and cleans up memory allocation in the iosapic driver.
Summary:
- Allow configuring 64-bit kernel with ARCH=parisc
- Fix asm/errno.h includes in tools directory for parisc and xtensa
- Clean up iosapic memory allocation
- Minor typo and spelling fixes"
* tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Allow CONFIG_64BIT with ARCH=parisc
parisc: remove obsolete manual allocation aligning in iosapic
tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa
Input: hp_sdc: fix spelling typo in comment
parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
|
|
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, two of these tests set nid != NUMA_NO_NODE. All tests are
run for both top-down and bottom-up allocation directions.
The tested scenarios are:
Range unrestricted:
- region cannot be allocated:
+ none of the nodes have enough memory to allocate the region
Range restricted:
- region can be allocated in the specific node requested without dropping
min_addr:
+ the range fully overlaps with the node, and there are adjacent
reserved regions
- region cannot be allocated:
+ nid is set to NUMA_NO_NODE and the total range can fit the region,
but the range is split between two nodes and everything else is
reserved
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/4b2c7e6e5f3a9837939e99293c77e0e6fc3ae4f9.1663046060.git.remckee0@gmail.com
|
|
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, all of these tests set nid != NUMA_NO_NODE. These tests are
run with a bottom-up allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
- the specific node requested cannot accommodate the request, but the
region can be allocated in a different node:
+ there are no previously reserved regions, but node is too small
+ the requested node is fully reserved
+ the requested node is partially reserved and does not have
enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the first
node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
- region cannot be allocated in the specific node requested, but it can be
allocated in the requested range:
+ range overlaps with multiple nodes along node boundaries, and the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and the
requested node starts after max_addr
- region cannot be allocated in the specific node requested, but it can be
allocated after dropping min_addr:
+ range partially overlaps with two different nodes, where the
second node is the requested node
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/00c4810daaf5d050abc71915b24ed7419bb16b51.1663046060.git.remckee0@gmail.com
|
|
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, all of these tests set nid != NUMA_NO_NODE. These tests are
run with a top-down allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
- the specific node requested cannot accommodate the request, but the
region can be allocated in a different node:
+ there are no previously reserved regions, but node is too small
+ the requested node is fully reserved
+ the requested node is partially reserved and does not have
enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the first
node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
- region cannot be allocated in the specific node requested, but it can be
allocated in the requested range:
+ range overlaps with multiple nodes along node boundaries, and the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and the
requested node starts after max_addr
- region cannot be allocated in the specific node requested, but it can be
allocated after dropping min_addr:
+ range partially overlaps with two different nodes, where the
second node is the requested node
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/84009c5b3969337ccf89df850db56d364f8c228b.1663046060.git.remckee0@gmail.com
|
|
Add function setup_numa_memblock() for setting up a memory layout with
multiple NUMA nodes in a previously allocated dummy physical memory.
This function can be used in place of setup_memblock() in tests that need
to simulate a NUMA system.
setup_numa_memblock():
- allows for setting up a memory layout by specifying the fraction of
MEM_SIZE in each node
Set CONFIG_NODES_SHIFT to 4 when building with NUMA=1 to allow for up to
16 NUMA nodes.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/4566d816a85f009268d4858d1ef06c7571a960f9.1663046060.git.remckee0@gmail.com
|
|
Legacy BPF map declarations are no longer supported in libbpf v1.0 [0].
Only BTF-defined maps are supported starting from v1.0, so it is time to
remove the definition of bpf_map_def in bpf_helpers.h.
[0] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20220913073643.19960-1-liuxin350@huawei.com
|
|
Add a small tool, veristat, that allows mass-verification of
a set of *libbpf-compatible* BPF ELF object files. For each such object
file, veristat will attempt to verify each BPF program *individually*.
Regardless of success or failure, it parses BPF verifier stats and
outputs them in human-readable table format. In the future we can also
add CSV and JSON output for more scriptable post-processing, if necessary.
veristat allows to specify a set of stats that should be output and
ordering between multiple objects and files (e.g., so that one can
easily order by total instructions processed, instead of default file
name, prog name, verdict, total instructions order).
This tool should be useful for validating various BPF verifier changes
or even validating different kernel versions for regressions.
Here's an example for some of the heaviest selftests/bpf BPF object
files:
$ sudo ./veristat -s insns,file,prog {pyperf,loop,test_verif_scale,strobemeta,test_cls_redirect,profiler}*.linked3.o
File Program Verdict Duration, us Total insns Total states Peak states
------------------------------------ ------------------------------------ ------- ------------ ----------- ------------ -----------
loop3.linked3.o while_true failure 350990 1000001 9663 9663
test_verif_scale3.linked3.o balancer_ingress success 115244 845499 8636 2141
test_verif_scale2.linked3.o balancer_ingress success 77688 773445 3048 788
pyperf600.linked3.o on_event success 2079872 624585 30335 30241
pyperf600_nounroll.linked3.o on_event success 353972 568128 37101 2115
strobemeta.linked3.o on_event success 455230 557149 15915 13537
test_verif_scale1.linked3.o balancer_ingress success 89880 554754 8636 2141
strobemeta_nounroll2.linked3.o on_event success 433906 501725 17087 1912
loop6.linked3.o trace_virtqueue_add_sgs success 282205 398057 8717 919
loop1.linked3.o nested_loops success 125630 361349 5504 5504
pyperf180.linked3.o on_event success 2511740 160398 11470 11446
pyperf100.linked3.o on_event success 744329 87681 6213 6191
test_cls_redirect.linked3.o cls_redirect success 54087 78925 4782 903
strobemeta_subprogs.linked3.o on_event success 57898 65420 1954 403
test_cls_redirect_subprogs.linked3.o cls_redirect success 54522 64965 4619 958
strobemeta_nounroll1.linked3.o on_event success 43313 57240 1757 382
pyperf50.linked3.o on_event success 194355 46378 3263 3241
profiler2.linked3.o tracepoint__syscalls__sys_enter_kill success 23869 43372 1423 542
pyperf_subprogs.linked3.o on_event success 29179 36358 2499 2499
profiler1.linked3.o tracepoint__syscalls__sys_enter_kill success 13052 27036 1946 936
profiler3.linked3.o tracepoint__syscalls__sys_enter_kill success 21023 26016 2186 915
profiler2.linked3.o kprobe__vfs_link success 5255 13896 303 271
profiler1.linked3.o kprobe__vfs_link success 7792 12687 1042 1041
profiler3.linked3.o kprobe__vfs_link success 7332 10601 865 865
profiler2.linked3.o kprobe_ret__do_filp_open success 3417 8900 216 199
profiler2.linked3.o kprobe__vfs_symlink success 3548 8775 203 186
pyperf_global.linked3.o on_event success 10007 7563 520 520
profiler3.linked3.o kprobe_ret__do_filp_open success 4708 6464 532 532
profiler1.linked3.o kprobe_ret__do_filp_open success 3090 6445 508 508
profiler3.linked3.o kprobe__vfs_symlink success 4477 6358 521 521
profiler1.linked3.o kprobe__vfs_symlink success 3381 6347 507 507
profiler2.linked3.o raw_tracepoint__sched_process_exec success 2464 5874 292 189
profiler3.linked3.o raw_tracepoint__sched_process_exec success 2677 4363 397 283
profiler2.linked3.o kprobe__proc_sys_write success 1800 4355 143 138
profiler1.linked3.o raw_tracepoint__sched_process_exec success 1649 4019 333 240
pyperf600_bpf_loop.linked3.o on_event success 2711 3966 306 306
profiler2.linked3.o raw_tracepoint__sched_process_exit success 1234 3138 83 66
profiler3.linked3.o kprobe__proc_sys_write success 1755 2623 223 223
profiler1.linked3.o kprobe__proc_sys_write success 1222 2456 193 193
loop2.linked3.o while_true success 608 1783 57 30
profiler3.linked3.o raw_tracepoint__sched_process_exit success 789 1680 146 146
profiler1.linked3.o raw_tracepoint__sched_process_exit success 592 1526 133 133
strobemeta_bpf_loop.linked3.o on_event success 1015 1512 106 106
loop4.linked3.o combinations success 165 524 18 17
profiler3.linked3.o raw_tracepoint__sched_process_fork success 196 299 25 25
profiler1.linked3.o raw_tracepoint__sched_process_fork success 109 265 19 19
profiler2.linked3.o raw_tracepoint__sched_process_fork success 111 265 19 19
loop5.linked3.o while_true success 47 84 9 9
------------------------------------ ------------------------------------ ------- ------------ ----------- ------------ -----------
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220909193053.577111-4-andrii@kernel.org
|
|
Fix SIGSEGV caused by libbpf trying to find attach type in vmlinux BTF
for freplace programs. It's wrong to search in vmlinux BTF and libbpf
doesn't even mark vmlinux BTF as required for freplace programs. So
trying to search anything in obj->vmlinux_btf might cause NULL
dereference if nothing else in BPF object requires vmlinux BTF.
Instead, error out if freplace (EXT) program doesn't specify
attach_prog_fd during at the load time.
Fixes: 91abb4a6d79d ("libbpf: Support attachment of BPF tracing programs to kernel modules")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220909193053.577111-3-andrii@kernel.org
|
|
Use proper SEC("tc") for test_verif_scale{1,3} programs. It's not
a problem for selftests right now because we manually set type
programmatically, but not having correct SEC() definitions makes it
harded to generically load BPF object files.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220909193053.577111-2-andrii@kernel.org
|
|
x86 will shortly start using -fpatchable-function-entry for purposes
other than ftrace, make sure the __patchable_function_entry section
isn't merged in the mcount_loc section.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220903131154.420467-2-jolsa@kernel.org
|
|
Test that the bonding and team drivers clean up an underlying device's
address lists (dev->uc, dev->mc) when the aggregated device is deleted.
Test addition and removal of the LACPDU multicast address on underlying
devices by the bonding driver.
v2:
* add lag_lib.sh to TEST_FILES
v3:
* extend bond_listen_lacpdu_multicast test to init_state up and down cases
* remove some superfluous shell syntax and 'set dev ... up' commands
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 3671: Delete tunnel_key set action with valid index
Test 8597: Delete tunnel_key set action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 3872: Delete sample action with valid index
Test a394: Delete sample action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test b811: Delete nat action with valid index
Test a521: Delete nat action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test a972: Delete ife encode action with valid index
Test 1272: Delete ife encode action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 6571: Delete connmark action with valid index
Test 3426: Delete connmark action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 2029: Add xt action with log-prefix
Test 3562: Replace xt action log-prefix
Test 8291: Delete xt action with valid index
Test 5169: Delete xt action with invalid index
Test 7284: List xt actions
Test 5010: Flush xt actions
Test 8437: Add xt action with duplicate index
Test 2837: Add xt action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 5153: Add gate action with priority and sched-entry
Test 7189: Add gate action with base-time
Test a721: Add gate action with cycle-time
Test c029: Add gate action with cycle-time-ext
Test 3719: Replace gate base-time action
Test d821: Delete gate action with valid index
Test 3128: Delete gate action with invalid index
Test 7837: List gate actions
Test 9273: Flush gate actions
Test c829: Add gate action with duplicate index
Test 3043: Add gate action with invalid index
Test 2930: Add gate action with cookie
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test c826: Add ctinfo action with default setting
Test 0286: Add ctinfo action with dscp
Test 4938: Add ctinfo action with valid cpmark and zone
Test 7593: Add ctinfo action with drop control
Test 2961: Replace ctinfo action zone and action control
Test e567: Delete ctinfo action with valid index
Test 6a91: Delete ctinfo action with invalid index
Test 5232: List ctinfo actions
Test 7702: Flush ctinfo actions
Test 3201: Add ctinfo action with duplicate index
Test 8295: Add ctinfo action with invalid index
Test 3964: Replace ctinfo action with invalid goto_chain control
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Validate the RNG hwcap and make sure we don't generate a SIGILL reading
RNDR when it is reported.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220913141101.151400-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Include SVE 2 and the various subfeatures it adds in the set of
hwcaps we check for.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220913141101.151400-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Clean up the output of the test by adding a missing newline, the fix had
been done locally but didn't make it into the applied version.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220913141101.151400-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Update version number.
This version includes fixes for:
- fix build failure when using gcc options -Wl,--as-needed
- Fix warning for perf_cap.cpu may be uninitialized
- Fix off by one check for MAX_DIE_PER_PACKAGE
- Fix issue with use of get_physical_die_id instead of
get_physical_die_id
Optimizations:
- Removed unused interfaces and functions
- Better handle package, die, cpu combination by
defining a struct and set at one place instead
at each user level.
New functional change:
- Warn if turbo is disabled and SST turbo-freq feature is requested
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Optimize CPU initialization.
Do cpu related initialization in one function, including setting the cpu
present_cpumask, target_cpumask, and cpu_map and core_count arrays.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
cpu_map already has the cpu package id, die id information.
Thus there is no need to re-evaluating sysfs attributes or stored data
file to get the package id and die id of a given CPU each time.
In order to unitlize this, cpu_map needs to be created unconditionally.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
pkg_id/die_id can be retrieved from struct isst_id, remove the redundant
clos_config->pkg_id/die_id fields.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Enforce the pkg/die value in struct isst_id are either -1 or a valid
value.
This helps avoid inconsistent or redundant checks.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Now, all the get_physical_pkg/die/core_id() users are inside
isst-config.c, so no need to export these APIs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
struct isst_id contains cpu, package and die info, and it can represent
a specific SST power domain.
Introduce is_cpu_in_power_domain() helper to identify if a cpu is in a
specified power_domain.
And cleanup the code to use the new helper.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
struct isst_id already contains package and die id information, thus
there is no need to get the package and die id information, when struct
isst_id is already available.
Remove unneeded get_physical_package_id/get_physical_die_id usage.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
With pkg and die info added into struct isst_id, more functions can
be converted to use struct isst_id as parameter.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Code uses pkg_id and die_id to refer to a specific power domain.
The pkg/die information is already settled at start time. Adding package
id and die id information into struct isst_id so that code does not need
to retrieve them at runtime.
More code cleanups can be done with the package/die info available.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
SST control is power-domain based rather than cpu based, on all the
systems including Sapphire Rapids and ealier.
SST core APIs uses cpu id as parameter, and use the underlying pkg_id and
die_id information to find a power domain, this is not straight forward
and introduces obscure logics in the code.
Introduce struct isst_id to represent a SST Power Domain.
All core APIs are converted to use struct isst_id as parameter instead of
using cpu id.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Remove unused core_mask array.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
