| Age | Commit message (Collapse) | Author |
|---|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Add more logic code to skip the tests if particular configuration isn't
available to make sure that either we skip each test or mark it pass/fail.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There are multiple #ifdef blocks inside functions where they return just
0 if #ifdef is false. This makes number of tests counting difficult.
Move those functions inside one #ifdef block and move all of them
together. This is preparatory patch for next patch to convert this into
TAP format. So in this patch, we are just moving functions around
without any changes.
With and without this patch, the output of this patch is same.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently the tty_tstamp_update test reports a different exit message
for every path it can exit via. This can be confusing for automated systems
as the string that gets logged is interpreted as a test name so if the test
status changes they can't tell that it's the same test case that was run,
they can see that the overall status of the test program is a failure but
it's not clear that it was running the same test.
Change all the messages that are logged to be diagnostic prints and log the
name of the program as the test name.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently there's no helper which a test can use to report it's result as
a KSFT_ result code, we can report a boolean pass/fail but not a skip. This
is sometimes a useful idiom so let's add a helper ksft_test_result_report()
which translates into the relevant report types.
Due to the use of va_args in the result reporting functions this is done as
a macro rather than an inline function as one might expect, none of the
alternatives looked particularly great.
Resolved merge conflict in next betwwen the following commits:
f7d5bcd35d42 ("selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn")
5d3a9274f0d1 ("kselftest: Add mechanism for reporting a KSFT_ result code")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The dso pointer in 'struct dso_data' is necessary for reference count
checking to account for the dso_data forming a global list of open dso's
with references to the dso.
The dso pointer also allows for the indirection that reference count
checking needs. Outside of reference count checking the indirection
isn't needed and container_of() is more efficient and saves space.
The reference count won't be increased by placing items onto the global
list, matching how things were before the reference count checking
change, but we assert the dso is in dsos holding it live (and that the
set of open dsos is a subset of all dsos for the machine).
Update the DSO data tests so that they use a dsos struct to make the
invariant true.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20240506180104.485674-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
dso__load_sym_internal() passed curr_mapp as an out argument to
dso__process_kernel_symbol(). The out argument was never used so remove
it to simplify the reference counting logic.
Simplify reference counting issues with curr_dso by ensuring the value
it points to has a +1 reference count, and then putting as
necessary.
This avoids some reference counting games when the dso is created making
the code more obviously correct with some possible introduced overhead
due to the reference counting get/puts.
This, however, silences reference count checking and we can always
optimize from a seemingly correct point.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20240506180104.485674-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dso__put() after the map creation causes a use after put in
dso__set_loaded().
To ensure there is a +1 reference count on both sides of the if-else, do
a dso__get() on the found map's dso.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20240506180104.485674-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A dso__put() is needed for the dsos__find() when the map is created and
a buildid is sought.
Fixes: f649ed80f3cabbf1 ("perf dsos: Tidy reference counting and locking")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20240506180104.485674-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add reference count checking to struct dso, this can help with
implementing correct reference counting discipline. To avoid
RC_CHK_ACCESS everywhere, add accessor functions for the variables in
struct dso.
The majority of the change is mechanical in nature and not easy to
split up.
Committer testing:
'perf test' up to this patch shows no regressions.
But:
util/symbol.c: In function ‘dso__load_bfd_symbols’:
util/symbol.c:1683:9: error: too few arguments to function ‘dso__set_adjust_symbols’
1683 | dso__set_adjust_symbols(dso);
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from util/symbol.c:21:
util/dso.h:268:20: note: declared here
268 | static inline void dso__set_adjust_symbols(struct dso *dso, bool val)
| ^~~~~~~~~~~~~~~~~~~~~~~
make[6]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:106: /tmp/tmp.ZWHbQftdN6/util/symbol.o] Error 1
MKDIR /tmp/tmp.ZWHbQftdN6/tests/workloads/
make[6]: *** Waiting for unfinished jobs....
This was updated:
- symbols__fixup_end(&dso->symbols, false);
- symbols__fixup_duplicate(&dso->symbols);
- dso->adjust_symbols = 1;
+ symbols__fixup_end(dso__symbols(dso), false);
+ symbols__fixup_duplicate(dso__symbols(dso));
+ dso__set_adjust_symbols(dso);
But not build tested with BUILD_NONDISTRO and libbfd devel files installed
(binutils-devel on fedora).
Add the missing argument:
symbols__fixup_end(dso__symbols(dso), false);
symbols__fixup_duplicate(dso__symbols(dso));
- dso__set_adjust_symbols(dso);
+ dso__set_adjust_symbols(dso, true);
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
CONFIG_BASE_FULL is equivalent to !CONFIG_BASE_SMALL and is enabled by
default: CONFIG_BASE_SMALL is the special case to take care of.
So, remove CONFIG_BASE_FULL and move the config choice to
CONFIG_BASE_SMALL (which defaults to 'n')
For defconfigs explicitely disabling BASE_FULL, explicitely enable
BASE_SMALL.
For defconfigs explicitely enabling BASE_FULL, drop it as it is the
default.
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240505080343.1471198-4-yoann.congal@smile.fr
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Switch to using the bsearch library function rather than having a hand
written binary search. Const-ify some static functions to avoid compiler
warnings.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Function was only called in dsos.c with the dso parameter as
NULL. Remove the function and specialize for the dso being NULL case
removing other unused functions along the way.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Function no longer used so remove.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
DSOs were held on a list for fast iteration and in an rbtree for fast
finds.
Switch to using a lazily sorted array where iteration is just iterating
through the array and binary searches are the same complexity as
searching the rbtree.
The find may need to sort the array first which does increase the
complexity, but add operations have lower complexity and overall the
complexity should remain about the same.
The set name operations on the dso just records that the array is no
longer sorted, avoiding complexity in rebalancing the rbtree.
Tighter locking discipline is enforced to avoid the array being resorted
while long and short names or ids are changed.
The array is smaller in size, replacing 6 pointers with 2, and so even
with extra allocated space in the array, the array may be 50%
unoccupied, the memory saving should be at least 2x.
Committer testing:
On a previous version of this patchset we were getting a lot of warnings
about deleting a DSO still on a list, now it is ok:
root@x1:~# perf probe -l
root@x1:~# perf probe finish_task_switch
Added new event:
probe:finish_task_switch (on finish_task_switch)
You can now use it in all perf tools, such as:
perf record -e probe:finish_task_switch -aR sleep 1
root@x1:~# perf probe -l
probe:finish_task_switch (on finish_task_switch@kernel/sched/core.c)
root@x1:~# perf trace -e probe:finish_task_switch/max-stack=8/ --max-events=1
0.000 migration/0/19 probe:finish_task_switch(__probe_ip: -1894408688)
finish_task_switch.isra.0 ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
smpboot_thread_fn ([kernel.kallsyms])
kthread ([kernel.kallsyms])
ret_from_fork ([kernel.kallsyms])
ret_from_fork_asm ([kernel.kallsyms])
root@x1:~#
root@x1:~# perf probe -d probe:*
Removed event: probe:finish_task_switch
root@x1:~# perf probe -l
root@x1:~#
I also ran the full 'perf test' suite after applying this one, no
regressions.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adds a utility to exercise the prctl DEXCR inheritance in the shell.
Supports setting and clearing each aspect.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[mpe: Use correct SPDX license, use execvp() for usability, print errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-9-bgray@linux.ibm.com
|
|
Now that the DEXCR can be configured with prctl, add a section in
lsdexcr that explains why each aspect is set the way it is.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-8-bgray@linux.ibm.com
|
|
Now that a process can control its DEXCR to some extent, make the
hashchk tests more reliable by explicitly setting the local and onexec
NPHIE aspect.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-7-bgray@linux.ibm.com
|
|
Some basic tests of the prctl interface of the DEXCR.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[mpe: Add missing SPDX tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-6-bgray@linux.ibm.com
|
|
Add wb_monitor.py script to monitor writeback information on backing dev
which makes it easier and more convenient to observe writeback behaviors
of running system.
The wb_monitor.py script is written based on wq_monitor.py.
Following domain hierarchy is tested:
global domain (320G)
/ \
cgroup domain1(10G) cgroup domain2(10G)
| |
bdi wb1 wb2
The wb_monitor.py script output is as following:
./wb_monitor.py 252:16 -c
writeback reclaimable dirtied written avg_bw
252:16_1 0 0 0 0 102400
252:16_4284 672 820064 9230368 8410304 685612
252:16_4325 896 819840 10491264 9671648 652348
252:16 1568 1639904 19721632 18081952 1440360
writeback reclaimable dirtied written avg_bw
252:16_1 0 0 0 0 102400
252:16_4284 672 820064 9230368 8410304 685612
252:16_4325 896 819840 10491264 9671648 652348
252:16 1568 1639904 19721632 18081952 1440360
...
Link: https://lkml.kernel.org/r/20240423034643.141219-5-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Cc: Brian Foster <bfoster@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Previously soft-dirty was unconditionally exiting with success, even if
one of its testcases failed. Let's fix that so that failure can be
reported to automated systems properly.
Link: https://lkml.kernel.org/r/20240424105301.3157695-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It could not find __vdso_getcpu and __vdso_gettimeofday when test getcpu
and gettimeofday on LoongArch.
# make headers && cd tools/testing/selftests/vDSO && make
# ./vdso_test_getcpu
Could not find __vdso_getcpu
# ./vdso_test_gettimeofday
Could not find __vdso_gettimeofday
One simple way is to add LoongArch case to define version and name, just
like commit d942f231afc0 ("selftests/vDSO: Add riscv getcpu & gettimeofday
test"), but it is not the best way.
Since each architecture has already defined names and versions in
vdso_config.h, it is proper to include vdso_config.h to get version and
name for all archs.
Link: https://lkml.kernel.org/r/20240428030530.24399-3-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/vDSO: Fix errors on LoongArch", v4.
This patch (of 2):
There exist the following errors when build vDSO selftests on LoongArch:
# make headers && cd tools/testing/selftests/vDSO && make
...
error: 'VDSO_VERSION' undeclared (first use in this function)
...
error: 'VDSO_NAMES' undeclared (first use in this function)
We can see the following code in arch/loongarch/vdso/vdso.lds.S:
VERSION
{
LINUX_5.10 {
global:
__vdso_getcpu;
__vdso_clock_getres;
__vdso_clock_gettime;
__vdso_gettimeofday;
__vdso_rt_sigreturn;
local: *;
};
}
so VDSO_VERSION should be 6 and VDSO_NAMES should be 1 for LoongArch,
add them to fix the building errors on LoongArch.
Link: https://lkml.kernel.org/r/20240428030530.24399-1-yangtiezhu@loongson.cn
Link: https://lkml.kernel.org/r/20240428030530.24399-2-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "test_xarray: couple of fixes for v6-9-rc6", v2.
Here are a couple of fixes which should be merged into the queue for
v6.9-rc6. The first one was reported by Liam, after fixing that I noticed
an issue with a test, and a fix for that is in the second patch.
This patch (of 2):
Liam reported that compiling the test_xarray on userspace was broken. I
was not even aware that was possible but you can via and you can run these
tests in userspace with:
make -C tools/testing/radix-tree
./tools/testing/radix-tree/xarray
Add the two helpers we need to fix compilation. We don't need a userspace
schedule() so just make it do nothing.
Link: https://lkml.kernel.org/r/20240423192221.301095-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20240423192221.301095-2-mcgrof@kernel.org
Fixes: a60cc288a1a2 ("test_xarray: add tests for advanced multi-index use")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a regular expression in the map file so that appropriate JSON event
files are used for AMD Zen 5 processors belonging to Family 1Ah.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/862a6b683755601725f9081897a850127d085ace.1714717230.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add metrics taken from Section 1.2 "Performance Measurement" of the
Performance Monitor Counters for AMD Family 1Ah Model 00h-0Fh Processors
document available at the link below.
The recommended metrics are sourced from Table 1 "Guidance for Common
Performance Statistics with Complex Event Selects".
The pipeline utilization metrics are sourced from Table 2 "Guidance
for Pipeline Utilization Analysis Statistics". These are useful for
finding performance bottlenecks by analyzing activity at different
stages of the pipeline. There are metric groups available for Level 1
and Level 2 analysis.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://bugzilla.kernel.org/attachment.cgi?id=305974
Link: https://lore.kernel.org/r/ee21ff77d89efa99997d3c2ebeeae22ddb6e7e12.1714717230.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add uncore events taken from Section 1.5 "L3 Cache Performance Monitor
Counters" and Section 2 "UMC Performance Monitors" of the Performance
Monitor Counters for AMD Family 1Ah Model 00h-0Fh Processors document
available at the link below.
This constitutes events which capture L3 cache and UMC command activity.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://bugzilla.kernel.org/attachment.cgi?id=305974
Link: https://lore.kernel.org/r/e11e8d9d1af34a0fb565fc9d1c4a05f569c39ddc.1714717230.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add core events taken from Section 1.4 "Core Performance Monitor
Counters" of the Performance Monitor Counters for AMD Family 1Ah Model
00h-0Fh Processors document available at the link below.
This constitutes events which capture information on op dispatch,
execution and retirement, branch prediction, L1 and L2 cache activity,
TLB activity, etc.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://bugzilla.kernel.org/attachment.cgi?id=305974
Link: https://lore.kernel.org/r/668d194241bf0d42dc37f1c5af8131069a0bd82c.1714717230.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Syscall augmentation is causing samples not to be written to the
perf.data file with "perf trace record". Disabling augmentation is
sub-optimal, but it beats having a totally broken perf trace record.
Closes: https://lore.kernel.org/lkml/CAP-5=fV9Gd1Teak+EOcUSxe13KqSyfZyPNagK97GbLiOQRgGaw@mail.gmail.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240216172357.65037-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Dave Jiang:
"Add missing RCH support for endpoint access_coordinate calculation.
A late bug was reported by Robert Richter that the Restricted CXL Host
(RCH) support was missing in the CXL endpoint access_coordinate
calculation.
The missing support causes the topology iterator to stumble over a
NULL pointer and triggers a kernel OOPS on a platform with CXL 1.1
support.
The fix bypasses RCH topology as the access_coordinate calculation is
not necessary since RCH does not support hotplug and the memory region
exported should be covered by the HMAT table already.
A unit test is also added to cxl_test to check against future
regressions on the topology iterator"
* tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
|
|
I often forget the exact naming of ops and have to look at
the spec to find it. Add support for listing the operations:
$ ./cli.py --spec .../netdev.yaml --list-ops
dev-get [ do, dump ]
page-pool-get [ do, dump ]
page-pool-stats-get [ do, dump ]
queue-get [ do, dump ]
napi-get [ do, dump ]
qstats-get [ dump ]
For completeness also support listing all ops (including
notifications:
# ./cli.py --spec .../netdev.yaml --list-msgs
dev-get [ dump, do ]
dev-add-ntf [ notify ]
dev-del-ntf [ notify ]
dev-change-ntf [ notify ]
page-pool-get [ dump, do ]
page-pool-add-ntf [ notify ]
page-pool-del-ntf [ notify ]
page-pool-change-ntf [ notify ]
page-pool-stats-get [ dump, do ]
queue-get [ dump, do ]
napi-get [ dump, do ]
qstats-get [ dump ]
Use double space after the name for slightly easier to read
output.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240502164043.2130184-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Perf event names aren't case sensitive. For sysfs events the entire
directory of events is read then iterated comparing names in a case
insensitive way, most often to see if an event is present.
Consider:
$ perf stat -e inst_retired.any true
The event inst_retired.any may be present in any PMU, so every PMU's
sysfs events are loaded and then searched with strcasecmp to see if
any match. This event is only present on the cpu PMU as a JSON event
so a lot of events were loaded from sysfs unnecessarily just to prove
an event didn't exist there.
This change avoids loading all the events by assuming sysfs event
names are always either lower or uppercase. It uses file exists and
only loads the events when the desired event is present.
For the example above, the number of openat calls measured by 'perf
trace' on a tigerlake laptop goes from 325 down to 255. The reduction
will be larger for machines with many PMUs, particularly replicated
uncore PMUs.
Ensure pmu_aliases_parse() is called before all uses of the aliases
list, but remove some "pmu->sysfs_aliases_loaded" tests as they are now
part of the function.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Being either lower or upper case means event name probes can avoid
scanning the directory doing case insensitive comparisons, just the
lower or upper case version of the name can be checked for
existence.
For the majority of PMUs event names are all lower case, upper case
names are present on S390.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow events/aliases to be eagerly loaded for a PMU. Factor out the
pmu_aliases_parse to allow this.
Parse a test event and check it configures the attribute as expected.
There is overlap with the parse-events tests, but this test is done with
a PMU created in a temp directory and doesn't rely on PMUs in sysfs.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In tests/pmu.c, make a common utility that creates a PMU in a mkdtemp
directory and uses regular PMU parsing logic to load that PMU. Formats
must still be eagerly loaded as by default the PMU code assumes devices
are going to be in sysfs.
In util/pmu.[ch], hide perf_pmu__format_parse but add the eager argument
to perf_pmu__lookup called by perf_pmus__add_test_pmu. Later patches
will eagerly load other non-sysfs files when eager loading is enabled.
In tests/pmu.c, rather than manually constructing a list of term
arguments, just use the term parsing code from a string.
Add more comments and debug logging.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add JSON to the test name.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang finds and warning about some uninitialized variables. Fix these
by initializing them.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang generates warning here, because struct cpu_hogger has multiple
fields, and the code is initializing an array of these structs, and it
is incorrect to specify a single NULL value as the initializer.
Fix this by initializing with {}, so that the compiler knows to use
default initializer values for all fields in each array entry.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang warns about fd being used uninitialized, in
test_memcg_reclaim()'s error handling path.
Fix this by initializing fd to -1.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang is pickier than gcc, about which version of abs(3) to call,
depending on the argument type:
int abs(int j);
long labs(long j);
long long llabs(long long j);
...and this is causing both build failures and warnings, when running:
make LLVM=1 -C tools/testing/selftests
Fix this by calling labs() in value_close(), because the arguments are
unambiguously "long" type.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Change the return types of bitops functions (ffs, fls, and fns) from
long to int. The expected return values are in the range [0, 64], for
which int is sufficient.
Additionally, int aligns well with the return types of the corresponding
__builtin_* functions, potentially reducing overall type conversions.
Many of the existing bitops functions already return an int and don't
need to be changed. The bitops functions in arch/ should be considered
separately.
Adjust some return variables to match the function return types.
With GCC 13 and defconfig, these changes reduced the size of a test
kernel image by 5,432 bytes on arm64 and by 248 bytes on riscv; there
were no changes in size on x86_64, powerpc, or m68k.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The hashchk tests want to verify that the hash key is changed over exec.
It does so by calculating hashes at the same address across an exec.
This is made simpler by disabling PIE functionality, so we can
re-execute ourselves and be using the same addresses in the child.
While -fno-pie is already added, -no-pie is also required.
Fixes: bdb07f35a52f ("selftests/powerpc/dexcr: Add hashst/hashchk test")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-2-bgray@linux.ibm.com
|
|
[Differences from V1:
- Do not introduce a global typedef, as this is a public header.
- Keep the void* casts in BPF_KPROBE_READ_RET_IP and
BPF_KRETPROBE_READ_RET_IP, as these are necessary
for converting to a const void* argument of
bpf_probe_read_kernel.]
The BPF_PROG, BPF_KPROBE and BPF_KSYSCALL macros defined in
tools/lib/bpf/bpf_tracing.h use a clever hack in order to provide a
convenient way to define entry points for BPF programs as if they were
normal C functions that get typed actual arguments, instead of as
elements in a single "context" array argument.
For example, PPF_PROGS allows writing:
SEC("struct_ops/cwnd_event")
void BPF_PROG(cwnd_event, struct sock *sk, enum tcp_ca_event event)
{
bbr_cwnd_event(sk, event);
dctcp_cwnd_event(sk, event);
cubictcp_cwnd_event(sk, event);
}
That expands into a pair of functions:
void ____cwnd_event (unsigned long long *ctx, struct sock *sk, enum tcp_ca_event event)
{
bbr_cwnd_event(sk, event);
dctcp_cwnd_event(sk, event);
cubictcp_cwnd_event(sk, event);
}
void cwnd_event (unsigned long long *ctx)
{
_Pragma("GCC diagnostic push")
_Pragma("GCC diagnostic ignored \"-Wint-conversion\"")
return ____cwnd_event(ctx, (void*)ctx[0], (void*)ctx[1]);
_Pragma("GCC diagnostic pop")
}
Note how the 64-bit unsigned integers in the incoming CTX get casted
to a void pointer, and then implicitly converted to whatever type of
the actual argument in the wrapped function. In this case:
Arg1: unsigned long long -> void * -> struct sock *
Arg2: unsigned long long -> void * -> enum tcp_ca_event
The behavior of GCC and clang when facing such conversions differ:
pointer -> pointer
Allowed by the C standard.
GCC: no warning nor error.
clang: no warning nor error.
pointer -> integer type
[C standard says the result of this conversion is implementation
defined, and it may lead to unaligned pointer etc.]
GCC: error: integer from pointer without a cast [-Wint-conversion]
clang: error: incompatible pointer to integer conversion [-Wint-conversion]
pointer -> enumerated type
GCC: error: incompatible types in assigment (*)
clang: error: incompatible pointer to integer conversion [-Wint-conversion]
These macros work because converting pointers to pointers is allowed,
and converting pointers to integers also works provided a suitable
integer type even if it is implementation defined, much like casting a
pointer to uintptr_t is guaranteed to work by the C standard. The
conversion errors emitted by both compilers by default are silenced by
the pragmas.
However, the GCC error marked with (*) above when assigning a pointer
to an enumerated value is not associated with the -Wint-conversion
warning, and it is not possible to turn it off.
This is preventing building the BPF kernel selftests with GCC.
This patch fixes this by avoiding intermediate casts to void*,
replaced with casts to `unsigned long long', which is an integer type
capable of safely store a BPF pointer, much like the standard
uintptr_t.
Testing performed in bpf-next master:
- vmtest.sh -- ./test_verifier
- vmtest.sh -- ./test_progs
- make M=samples/bpf
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240502170925.3194-1-jose.marchesi@oracle.com
|
|
The macro bpf_ksym_exists is defined in bpf_helpers.h as:
#define bpf_ksym_exists(sym) ({ \
_Static_assert(!__builtin_constant_p(!!sym), #sym " should be marked as __weak"); \
!!sym; \
})
The purpose of the macro is to determine whether a given symbol has
been defined, given the address of the object associated with the
symbol. It also has a compile-time check to make sure the object
whose address is passed to the macro has been declared as weak, which
makes the check on `sym' meaningful.
As it happens, the check for weak doesn't work in GCC in all cases,
because __builtin_constant_p not always folds at parse time when
optimizing. This is because optimizations that happen later in the
compilation process, like inlining, may make a previously non-constant
expression a constant. This results in errors like the following when
building the selftests with GCC:
bpf_helpers.h:190:24: error: expression in static assertion is not constant
190 | _Static_assert(!__builtin_constant_p(!!sym), #sym " should be marked as __weak"); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fortunately recent versions of GCC support a __builtin_has_attribute
that can be used to directly check for the __weak__ attribute. This
patch changes bpf_helpers.h to use that builtin when building with a
recent enough GCC, and to omit the check if GCC is too old to support
the builtin.
The macro used for GCC becomes:
#define bpf_ksym_exists(sym) ({ \
_Static_assert(__builtin_has_attribute (*sym, __weak__), #sym " should be marked as __weak"); \
!!sym; \
})
Note that since bpf_ksym_exists is designed to get the address of the
object associated with symbol SYM, we pass *sym to
__builtin_has_attribute instead of sym. When an expression is passed
to __builtin_has_attribute then it is the type of the passed
expression that is checked for the specified attribute. The
expression itself is not evaluated. This accommodates well with the
existing usages of the macro:
- For function objects:
struct task_struct *bpf_task_acquire(struct task_struct *p) __ksym __weak;
[...]
bpf_ksym_exists(bpf_task_acquire)
- For variable objects:
extern const struct rq runqueues __ksym __weak; /* typed */
[...]
bpf_ksym_exists(&runqueues)
Note also that BPF support was added in GCC 10 and support for
__builtin_has_attribute in GCC 9.
Locally tested in bpf-next master branch.
No regressions.
Signed-of-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240428112559.10518-1-jose.marchesi@oracle.com
|
|
Detect packets with ip_summed CHECKSUM_PARTIAL and skip these. These
should not exist, as the test sends individual packets between two
hosts. But if (HW) GRO is on, with randomized content sometimes
subsequent packets can be coalesced.
In this case the GSO packet checksum is converted to a pseudo checksum
in anticipation of sending out as TSO/USO. So the field will not match
the expected value.
Do not count these as test errors.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240501193156.3627344-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're a bit too loose with error checking for background
processes. cmd() completely ignores the fail argument
passed to the constructor if background is True.
Default to checking for errors if process is not terminated
explicitly. Caller can override with True / False.
For bkg() the processing step is called magically by __exit__
so record the value passed in the constructor.
Reported-by: Willem de Bruijn <willemb@google.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240502025325.1924923-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add INT_MAX check to ring_buffer__consume_n(). We do the similar check
to handle int return result of all these ring buffer APIs in other APIs
and ring_buffer__consume_n() is missing one. This patch fixes this
omission.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240430201952.888293-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
ringbuf_process_ring() return int64_t, while ring__consume_n() assigns
it to int. It's highly unlikely, but possible for ringbuf_process_ring()
to return value larger than INT_MAX, so use int64_t. ring__consume_n()
does check INT_MAX before returning int result to the user.
Fixes: 4d22ea94ea33 ("libbpf: Add ring__consume_n / ring_buffer__consume_n")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240430201952.888293-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch adds a selftest to show the usage of the new arguments in
cong_control. For simplicity's sake, the testing example reuses cubic's
kernel functions.
Signed-off-by: Miao Xu <miaxu@meta.com>
Link: https://lore.kernel.org/r/20240502042318.801932-4-miaxu@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch adds two new arguments for cong_control of struct
tcp_congestion_ops:
- ack
- flag
These two arguments are inherited from the caller tcp_cong_control in
tcp_intput.c. One use case of them is to update cwnd and pacing rate
inside cong_control based on the info they provide. For example, the
flag can be used to decide if it is the right time to raise or reduce a
sender's cwnd.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Miao Xu <miaxu@meta.com>
Link: https://lore.kernel.org/r/20240502042318.801932-2-miaxu@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
