summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2017-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix IGMP handling wrt VRF, from David Ahern. 2) Fix timer access to freed object in dccp, from Eric Dumazet. 3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are triggerable by userspace. Also from Eric Dumazet. 4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian King. 5) Correct datagram peek handling of empty SKBs, from Matthew Dawson. 6) Fix use after free in TIPC, from Eric Dumazet. 7) When replacing a route in ipv6 we need to reset the round robin pointer, from Wei Wang. 8) Fix bug in pci_find_pcie_root_port() which was unearthed by the relaxed ordering changes, from Thierry Redding. I made sure to get an explicit ACK from Bjorn this time around :-) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: repair fib6 tree in failure case net_sched: fix order of queue length updates in qdisc_replace() tools lib bpf: improve warning switchdev: documentation: minor typo fixes bpf, doc: also add s390x as arch to sysctl description net: sched: fix NULL pointer dereference when action calls some targets rxrpc: Fix oops when discarding a preallocated service call irda: do not leak initialized list.dev to userspace net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled PCI: Allow PCI express root ports to find themselves tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set ipv6: reset fn->rr_ptr when replacing route sctp: fully initialize the IPv6 address in sctp_v6_to_addr() tipc: fix use-after-free tun: handle register_netdevice() failures properly datagram: When peeking datagrams with offset < 0 don't skip empty skbs bpf, doc: improve sysctl knob description netxen: fix incorrect loop counter decrement nfp: fix infinite loop on umapping cleanup ...
2017-08-21objtool: Fix '-mtune=atom' decoding support in objtool 2.0Josh Poimboeuf
With '-mtune=atom', which is enabled with CONFIG_MATOM=y, GCC uses some unusual instructions for setting up the stack. Instead of: mov %rsp, %rbp it does: lea (%rsp), %rbp And instead of: add imm, %rsp it does: lea disp(%rsp), %rsp Add support for these instructions to the objtool decoder. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0") Link: http://lkml.kernel.org/r/4ea1db896e821226efe1f8e09f270771bde47e65.1501188854.git.jpoimboe@redhat.com [ This is a cherry-picked version of upcoming commit 5b8de48e82ba. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-21objtool: Fix objtool fallthrough detection with function paddingJosh Poimboeuf
When GCC adds NOP padding between functions, those NOPs aren't associated with a function symbol, which breaks objtool's detection of a function falling through to another function. Instead it shows confusing errors like: drivers/mtd/chips/cfi_util.o: warning: objtool: cfi_qry_mode_on()+0x8b: return with modified stack frame drivers/mtd/chips/cfi_util.o: warning: objtool: cfi_qry_mode_on()+0x0: stack state mismatch: cfa1=-4-32 cfa2=7+8 drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: fixup_use_fwh_lock()+0x8: unknown stack-related register move drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: fixup_use_fwh_lock()+0x0: stack state mismatch: cfa1=6+16 cfa2=7+8 drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: do_otp_write()+0xa: unsupported stack pointer realignment drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: do_otp_write()+0x0: stack state mismatch: cfa1=-4-40 cfa2=7+8 Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/43e7aae9a7a7710cd6df597fa9dc501da4ba0602.1502472193.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-21Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Removal of spin_unlock_wait() - SRCU updates - Torture-test updates - Documentation updates - Miscellaneous fixes - CPU-hotplug fixes - Miscellaneous non-RCU fixes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-20tools lib bpf: improve warningEric Leblond
Signed-off-by: Eric Leblond <eric@regit.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20Merge tag 'iio-for-4.14b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support, features and cleanup for the 4.14 cycle. New device support: * ak8974 - support the AMI306. * st_magnetometer - add support for the LIS2MDL with bindings. * rockchip-saradc - add binding for rv1108 SoC (no driver change). * srf08 - add srf02 (i2c only) and srf10 support. * stm32-timer - support for the STM32H7 to existing driver. Features: * tools - move over to the tools buildsystem rather than hand rolling. - add an install section to the build. * ak8974 - use serial number to add device randomness. - add AMI306 calibration data output. * ccs811 - triggered buffer support. * srf08 - add a device tree table as the old style i2c probing is going away, - add triggered buffer support * st32-adc - add optional st,min-sample-time-nsecs binding to allow control of sampling against analog circuitry. * stm32-timer - add output compare triggers. * ti-ads1015 - add threshold event support. * ti-ads7950 - Allow use on ACPI platforms including providing a default reference voltage as there is no way to obtain this on ACPI currently. Cleanup and fixes: * ad7606 - fix an error return code in probe. * ads1015 - fix incorrect data rate setting update when capture in progress, - fix wrong scale information for the ADS1115, - make conversions work when CONFIG_PM is not set, - make sure we don't get a stale result after a runtime resume by ensuring we wait long enough, - avoid returning a false error form the buffer setup callbacks, - add enough wait time to get the correct conversion, - remove an unnecessary config register update, - add a helper to set conversion mode reducing repeated boilerplate, - use devm_iio_triggered_buffer_setup to simplify error and remove paths, - use iio_device_claim_direct_mode instead of opencoding the same. * ak8974 - mark the INT_CLEAR register as precious to prevent debugfs access. * apds9300 - constify the i2c_device_id. * at91-sama5 adc - add missing Kconfig dependency. * bma180 accel - constify the i2c_device_id. * rockchip_saradc - explicitly request exclusive reset control as part of the reset rework on going throughout the kernel. * st_accel - fix drdy configuration for a load of accelerometers that only have the int1 line. Fix is unimportant as presumably no deviec tree actually used the non existent hardware line. * st_pressure - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support as they don't have this. Fix is unimportant as presumably no device tree actually used the non existent hardware line. * stm32-dac - explicitly request exclusive reset control (part of reset being reworked). * tsl2583 - constify the i2c_device_id. * xadc - coding style fixes.
2017-08-20Merge branch 'fortglx/4.14/time' of ↵Thomas Gleixner
https://git.linaro.org/people/john.stultz/linux into timers/core Pull timekeepig updates from John Stultz - kselftest improvements - Use the proper timekeeper in the debug code - Prevent accessing an unavailable wakeup source in the alarmtimer sysfs interface.
2017-08-19bpf: Allow numa selection in INNER_LRU_HASH_PREALLOC test of map_perf_testMartin KaFai Lau
This patch makes the needed changes to allow each process of the INNER_LRU_HASH_PREALLOC test to provide its numa node id when creating the lru map. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18test_kmod: fix description for -s -and -c parametersLuis R. Rodriguez
The descriptions were reversed, correct this. Link: http://lkml.kernel.org/r/20170809234635.13443-4-mcgrof@kernel.org Fixes: 64b671204afd71 ("test_sysctl: add generic script to expand on tests") Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reported-by: Daniel Mentz <danielmentz@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Redfearn <matt.redfearn@imgetc.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Michal Marek <mmarek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18perf annotate browser: Circulate percent, total-period and nr-samples viewTaeung Song
Using the existing 't' hotkey, support the three views: percent, total period and number of samples on the annotate TUI browser, circulating them like below: Percent -> Total Period -> Nr Samples -> Percent ... Committer notes: Removed new 'e' hotkey, should be resubmitted as a separate patch, with proper justification for its inclusion. Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <milian.wolff@kdab.com> Link: http://lkml.kernel.org/r/1503046028-5691-1-git-send-email-treeze.taeung@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-18perf annotate browser: Support --show-nr-samples optionTaeung Song
Support the --show-nr-samples in the TUI browser. Committer notes: Lift the restriction about --tui but leave it for --gtk: $ export LD_LIBRARY_PATH=~/lib64 $ perf annotate --gtk --show-nr-samples --show-nr-samples is not available in --gtk mode at this time $ Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1503046023-5646-1-git-send-email-treeze.taeung@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-18perf annotate: Document --show-total-period optionTaeung Song
When the --show-total-period option was introduced we forgot to add an entry in the man page, fix it. Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Martin Liška <mliska@suse.cz> Fixes: 0c4a5bcea460 ("perf annotate: Display total number of samples with --show-total-period") Link: http://lkml.kernel.org/r/1503046013-5555-1-git-send-email-treeze.taeung@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-18perf annotate stdio: Support --show-nr-samples optionTaeung Song
Add --show-nr-samples option to "perf annotate" so that it matches "perf report". Committer note: Note that it can't be used together with --show-total-period, which seems like a silly limitation, that can be lifted at some point. Made it bail out if not on --stdio. Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1503046008-5511-1-git-send-email-treeze.taeung@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-17perf tools: Use default CPUINFO_PROC where it fitsArnaldo Carvalho de Melo
Several architectures don't need to define it since the string is the same as the default one, so nuke them. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-v1e1jr1u474w9xcelpaoxamu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-17perf tools: Remove unused cpu_relax() macrosArnaldo Carvalho de Melo
Since 195564390210 ("perf_counter: kerneltop: simplify data_head read") we do not use it, and this was way back in 2009, remove it before some other arch maintainer adds its implementation, like so many did, needlessly :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-3l2su9c58eaq4twjzrf9uu08@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-17perf events parse: Rename parse_events_parse argumentsArnaldo Carvalho de Melo
Calling them just "data" is too vague, call it 'perf_state', to make it clearer, for instance, when looking at patch hunks. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rnhk5yb05wem77rjpclrh7so@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-17perf events parse: Use just one parse events state structArnaldo Carvalho de Melo
Andi reported problems when parse errors were detected with vendor events (json), because in the yyparse/parse_events_parse function we dereferenced the _data parameter to two different structs, with different layouts, which ended up making parse_events_evlist->error to point to random stack addresses. Fix it by making _data to always be struct parse_events_state, changing the only place where 'struct parse_events_term' was used in parse_events.y. Reported-by: Andi Kleen <ak@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-bc27lshz823hxl8n9nkelcgh@git.kernel.org Fixes: 90e2b22dee90 ("perf/tool: Add support to reuse event grammar to parse out terms") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-17perf events parse: Rename parsing state struct to clearer nameArnaldo Carvalho de Melo
Rename it from 'parse_events_evlist' to 'parse_events_state' to better state that this is parsing state that has to be passed around. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-dursqtg2h2w98ztaa297u43x@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-17perf events parse: Remove some needless local variablesArnaldo Carvalho de Melo
Those are just casting a void pointer to a struct to then pass them to functions, i.e. remove the local variables and pass the void pointer directly, the casting will be done and the code will be shorter. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-bzfodzr3mb46gy7u7v0mqad6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-17perf trace: Fix off by one string allocation problemArnaldo Carvalho de Melo
We need to consider the null terminator, oops, fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 017037ff3d0b ("perf trace: Allow specifying list of syscalls and events in -e/--expr/--event") Link: http://lkml.kernel.org/n/tip-j79jpqqe91gvxqmsgxgfn2ni@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-17perf jevents: Support FCMask and PortMaskAndi Kleen
Skylake server uncore IIO events need new FCMask/PortMask fields. Support those in the json parser and pass it through as a filter. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170816220201.19182-2-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-17tools lib bpf: Fix double file test in MakefileDaniel Díaz
The Makefile verifies the same file exists twice: test -f ../../../include/uapi/linux/bpf.h -a \ -f ../../../include/uapi/linux/bpf.h The purpose of the check is to ensure the diff (immediately after the test) doesn't fail with these two files: tools/include/uapi/linux/bpf.h include/uapi/linux/bpf.h Same recipe for bpf_common: test -f ../../../include/uapi/linux/bpf_common.h -a \ -f ../../../include/uapi/linux/bpf_common.h This corrects the location of the tests. Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1502814810-960-1-git-send-email-daniel.diaz@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-17kselftests: timers: set-timer-lat: Add one-shot timer test casesGreg Hackmann
These testcases are motivated by a recent alarmtimer regression, which caused one-shot CLOCK_{BOOTTIME,REALTIME}_ALARM timers to become periodic timers. The new testcases are very similar to the existing testcases for repeating timers. But rather than waiting for 5 alarms, they wait for 5 seconds and verify that the alarm fired exactly once. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-08-17kselftests: timers: set-timer-lat: Tweak reporting when timer fires earlyGreg Hackmann
Rather than printing an error inside the alarm signal handler, set a flag that we check later. This keeps the test from spamming the console every time the alarm fires early. It also fixes the test exiting with error code 0 if this was the only test failure. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-08-17kselftests: timers: freq-step: Fix build warningJohn Stultz
Fixes the following build warning: freq-step.c: In function ‘main’: freq-step.c:271:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ By returning the return values from ksft_success/fail. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-08-17kselftests: timers: freq-step: Define ADJ_SETOFFSET if device has older ↵John Stultz
kernel headers On some systems, the kernel headers haven't been updated to include ADJ_SETOFFSET, so define it in the test if needed. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-08-17Merge branches 'doc.2017.08.17a', 'fixes.2017.08.17a', ↵Paul E. McKenney
'hotplug.2017.07.25b', 'misc.2017.08.17a', 'spin_unlock_wait_no.2017.08.17a', 'srcu.2017.07.27c' and 'torture.2017.07.24c' into HEAD doc.2017.08.17a: Documentation updates. fixes.2017.08.17a: RCU fixes. hotplug.2017.07.25b: CPU-hotplug updates. misc.2017.08.17a: Miscellaneous fixes outside of RCU (give or take conflicts). spin_unlock_wait_no.2017.08.17a: Remove spin_unlock_wait(). srcu.2017.07.27c: SRCU updates. torture.2017.07.24c: Torture-test updates.
2017-08-17rcu: Drive TASKS_RCU directly off of PREEMPTPaul E. McKenney
The actual use of TASKS_RCU is only when PREEMPT, otherwise RCU-sched is used instead. This commit therefore makes synchronize_rcu_tasks() and call_rcu_tasks() available always, but mapped to synchronize_sched() and call_rcu_sched(), respectively, when !PREEMPT. This approach also allows some #ifdefs to be removed from rcutorture. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org>
2017-08-17selftests/powerpc: Improve tm-resched-dscrSam Bobroff
The tm-resched-dscr self test can, in some situations, run for several minutes before being successfully interrupted by the context switch it needs in order to perform the test. This often seems to occur when the test is being run in a virtual machine. Improve the test by running it under eat_cpu() to guarantee contention for the CPU and increase the chance of a context switch. In practice this seems to reduce the test time, in some cases, from more than two minutes to under a second. Also remove the "progress dots" so that if the test does run for a long time, it doesn't produce large amounts of unnecessary output. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-17Merge tag 'perf-core-for-mingo-4.14-20170816' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf core improvements and fixes: New features: - Support exporting Intel PT data to sqlite3 with python perf scripts, this is in addition to the postgresql support that was already there (Adrian Hunter) Infrastructure changes: - Handle perf tool builds with less features in perf shell tests, such as those with NO_LIBDWARF=1 or even without 'perf probe' (Arnaldo Carvalho de Melo) - Replace '|&' with '2>&1 |' to work with more shells in the just introduced perf test shell harness (Kim Phillips) Architecture related fixes: - Fix endianness problem when loading parameters in the BPF prologue generated by perf, noticed using 'perf test BPF' in s390x systems (Wang Nan, Thomas Richter) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-17Merge branch 'linus' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-16rtc: rtctest: Improve support detectionLukáš Doktor
The rtc-generic and opal-rtc are failing to run this test as they do not support all the features. Let's treat the error returns and skip to the following test. Theoretically the test_DATE should be also adjusted, but as it's enabled on demand I think it makes sense to fail in such case. Signed-off-by: Lukáš Doktor <ldoktor@redhat.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-08-16selftests/cpu-hotplug: Skip test when there is only one online cpuLi Zhijian
For only one online cpu case, 'make run_tests' try to offline the cpu0 that will always fail since the host can't offline this unique online cpu. this patch will skip the test to avoid this failure. Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-08-16selftests/cpu-hotplug: exit with failure when test occured unexpected behaviorsLi Zhijian
Previously, 'make run_tests -C cpu-hotplug' always PASS since cpu-on-off-test.sh always exits 0 even though the test got some unexpected errors like below: root@debian9:/home/lizhijian/chroot/linux/tools/testing/selftests/cpu-hotplug# make run_tests pid 878's current affinity mask: 1 pid 878's new affinity mask: 1 CPU online/offline summary: Cpus in online state: 0 Cpus in offline state: 0 Limited scope test: one hotplug cpu (leaves cpu in the original state): online to offline to online: cpu 0 ./cpu-on-off-test.sh: line 83: /sys/devices/system/cpu/cpu0/online: Permission denied offline_cpu_expect_success 0: unexpected fail ./cpu-on-off-test.sh: line 78: /sys/devices/system/cpu/cpu0/online: Permission denied online_cpu_expect_success 0: unexpected fail selftests: cpu-on-off-test.sh [PASS] after this patch, the test will exit with failure once it occurs some unexpected behaviors Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-08-16selftests: futex: convert test to use ksft TAP13 frameworkShuah Khan
Convert test to use ksft TAP13 framework to print user friendly test output which is consistent across kselftest suite. Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-08-16perf test shell: Replace '|&' with '2>&1 |' to work with more shellsKim Phillips
Since we do not specify bash (and/or zsh) as a requirement, use the standard error redirection that is more widely supported. Signed-off-by: Kim Phillips <kim.phillips@arm.com> Link: http://lkml.kernel.org/n/tip-ji5mhn3iilgch3eaay6csr6z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-16bpf: selftests add sockmap testsJohn Fastabend
This generates a set of sockets, attaches BPF programs, and sends some simple traffic using basic send/recv pattern. Additionally, we do a bunch of negative tests to ensure adding/removing socks out of the sockmap fail correctly. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16bpf: selftests: add tests for new __sk_buff membersJohn Fastabend
This adds tests to access new __sk_buff members from sk skb program type. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16bpf: sockmap sample programJohn Fastabend
This program binds a program to a cgroup and then matches hard coded IP addresses and adds these to a sockmap. This will receive messages from the backend and send them to the client. client:X <---> frontend:10000 client:X <---> backend:10001 To keep things simple this is only designed for 1:1 connections using hard coded values. A more complete example would allow many backends and clients. To run, # sockmap <cgroup2_dir> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16Tools: hv: update buffer handling in hv_fcopy_daemonOlaf Hering
Currently this warning is triggered when compiling hv_fcopy_daemon: hv_fcopy_daemon.c:216:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] kernel_modver = *(__u32 *)buffer; Convert the send/receive buffer to a union and pass individual members as needed. This also gives the correct size for the buffer. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-16Tools: hv: fix snprintf warning in kvp_daemonOlaf Hering
Increase buffer size so that "_{-INT_MAX}" will fit. Spotted by the gcc7 snprintf checker. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-16Tools: hv: vss: Skip freezing filesystems backed by loopAlex Ng
Since a loop device is backed by a file, a backup will already result in its parent filesystem being frozen. It's sufficient to just freeze the parent filesystem, so we can skip the loop device. This avoids a situation where a loop device and its parent filesystem are both frozen and then thawed out of order. For example, if the loop device is enumerated first, we would thaw it while its parent filesystem is still frozen. The thaw operation fails and the loop device remains frozen. Signed-off-by: Alex Ng <alexng@messages.microsoft.com> Signed-off-by: Vyronas Tsingaras <vyronas@vtsingaras.me> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-16perf bpf: Fix endianness problem when loading parameters in prologueWang Nan
Perf's BPF prologue generator unconditionally fetches 8 bytes for function parameters, which causes problems on big endian machines. Thomas gives a detailed analysis for this problem: http://lkml.kernel.org/r/968ebda5-abe4-8830-8d69-49f62529d151@linux.vnet.ibm.com ---- 8< ---- I investigated perf test BPF for s390x and have a question regarding the 38.3 subtest (bpf-prologue test) which fails on s390x. When I turn on trace_printk in tests/bpf-script-test-prologue.c I see this output in /sys/kernel/debug/tracing/trace: [root@s8360047 perf]# cat /sys/kernel/debug/tracing/trace perf-30229 [000] d..2 170161.535791: : f_mode 2001d00000000 offset:0 orig:0 perf-30229 [000] d..2 170161.535809: : f_mode 6001f00000000 offset:0 orig:0 perf-30229 [000] d..2 170161.535815: : f_mode 6001f00000000 offset:1 orig:0 perf-30229 [000] d..2 170161.535819: : f_mode 2001d00000000 offset:1 orig:0 perf-30229 [000] d..2 170161.535822: : f_mode 2001d00000000 offset:2 orig:1 perf-30229 [000] d..2 170161.535825: : f_mode 6001f00000000 offset:2 orig:1 perf-30229 [000] d..2 170161.535828: : f_mode 6001f00000000 offset:3 orig:1 perf-30229 [000] d..2 170161.535832: : f_mode 2001d00000000 offset:3 orig:1 perf-30229 [000] d..2 170161.535835: : f_mode 2001d00000000 offset:4 orig:0 perf-30229 [000] d..2 170161.535841: : f_mode 6001f00000000 offset:4 orig:0 [...] There are 3 parameters the eBPF program tests/bpf-script-test-prologue.c accesses: f_mode (member of struct file at offset 140) offset and orig. They are parameters of the lseek() system call triggered in this test case in function llseek_loop(). What is really strange is the value of f_mode. It is an 8 byte value, whereas in the probe event it is defined as a 4 byte value. The lower 4 bytes are all zero and do not belong to member f_mode. The correct value should be 2001d for read-only and 6001f for read-write open mode. Here is the output of the 'perf test -vv bpf' trace: Try to find probe point from debuginfo. Matched function: null_lseek [2d9310d] Probe point found: null_lseek+0 Searching 'file' variable in context. Converting variable file into trace event. converting f_mode in file f_mode type is unsigned int. Opening /sys/kernel/debug/tracing//README write=0 Searching 'offset' variable in context. Converting variable offset into trace event. offset type is long long int. Searching 'orig' variable in context. Converting variable orig into trace event. orig type is int. Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: p:perf_bpf_probe/func _text+8794224 f_mode=+140(%r2):x32 ---- 8< ---- This patch parses the type of each argument and converts data from memory to expected type. Now the test runs successfully on 4.13.0-rc5: [root@s8360046 perf]# ./perf test bpf 38: BPF filter : 38.1: Basic BPF filtering : Ok 38.2: BPF pinning : Ok 38.3: BPF prologue generation : Ok 38.4: BPF relocation checker : Ok [root@s8360046 perf]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20170815092159.31912-1-tmricht@linux.vnet.ibm.com Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-08-15selftests: add 'ip get' to rtnetlink.shFlorian Westphal
exercise ip/ip6 RTM_GETROUTE doit() callpath. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15perf script python: Add support for sqlite3 to call-graph-from-sql.pyAdrian Hunter
Add support for SQLite 3 to the call-graph-from-sql.py script. The SQL statements work as is, so just detect the database type by checking if the SQLite 3 file exists. Committer notes: Tested collecting the PT data on a RHEL7.4, generating the SQLite3 database there and then moving it to a Fedora 26 system where the call-graph-from-sql.py script was run, using python-pyside version 1.2.2-7fc26 to see the callgraphs using Qt4. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/1501749090-20357-6-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-15Merge tag 'linux-kselftest-4.13-rc6-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This update consists of important compile and run-time error fixes to timers/freq-step, kmod, and sysctl tests" * tag 'linux-kselftest-4.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: timers: freq-step: fix compile error selftests: futex: fix run_tests target test_sysctl: fix sysctl.sh by making it executable test_kmod: fix kmod.sh by making it executable
2017-08-15perf script python: Rename call-graph-from-postgresql.py to ↵Adrian Hunter
call-graph-from-sql.py Rename call-graph-from-postgresql.py to call-graph-from-sql.py in preparation for adding support to it for SQLite 3. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/1501749090-20357-5-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-15perf script python: Add support for exporting to sqlite3Adrian Hunter
Add support for exporting to SQLite 3 the same data as the PostgreSQL export. Committer note: Tested on RHEL 7.4 using the 1.2.2-4el python-pyside packages from EPEL. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/1501749090-20357-4-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-15perf scripts python: Fix query in call-graph-from-postgresql.pyAdrian Hunter
Add a missing space which seemed not to affect PostgreSQL but upsets SQLite. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/1501749090-20357-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 13:46:21 +0000