summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2018-10-25Merge tag 'libnvdimm-for-4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: - Improve the efficiency and performance of reading nvdimm-namespace labels. Reduce the amount of label data read at driver load time by a few orders of magnitude. Reduce heavyweight call-outs to platform-firmware routines. - Handle media errors located in the 'struct page' array stored on a persistent memory namespace. Let the kernel clear these errors rather than an awkward userspace workaround. - Fix Address Range Scrub (ARS) completion tracking. Correct occasions where the kernel indicates completion of ARS before submission. - Fix asynchronous device registration reference counting. - Add support for reporting an nvdimm dirty-shutdown-count via sysfs. - Fix various small libnvdimm core and uapi issues. * tag 'libnvdimm-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) acpi, nfit: Further restrict userspace ARS start requests acpi, nfit: Fix Address Range Scrub completion tracking UAPI: ndctl: Remove use of PAGE_SIZE UAPI: ndctl: Fix g++-unsupported initialisation in headers tools/testing/nvdimm: Populate dirty shutdown data acpi, nfit: Collect shutdown status acpi, nfit: Introduce nfit_mem flags libnvdimm, label: Fix sparse warning nvdimm: Use namespace index data to reduce number of label reads needed nvdimm: Split label init out from the logic for getting config data nvdimm: Remove empty if statement nvdimm: Clarify comment in sizeof_namespace_index nvdimm: Sanity check labeloff libnvdimm, dimm: Maximize label transfer size libnvdimm, pmem: Fix badblocks population for 'raw' namespaces libnvdimm, namespace: Drop the repeat assignment for variable dev->parent libnvdimm, region: Fail badblocks listing for inactive regions libnvdimm, pfn: during init, clear errors in the metadata area libnvdimm: Set device node in nd_device_register libnvdimm: Hold reference on parent while scheduling async init ...
2018-10-24net/ipv6: Allow onlink routes to have a device mismatch if it is the default ↵David Ahern
route The intent of ip6_route_check_nh_onlink is to make sure the gateway given for an onlink route is not actually on a connected route for a different interface (e.g., 2001:db8:1::/64 is on dev eth1 and then an onlink route has a via 2001:db8:1::1 dev eth2). If the gateway lookup hits the default route then it most likely will be a different interface than the onlink route which is ok. Update ip6_route_check_nh_onlink to disregard the device mismatch if the gateway lookup hits the default route. Turns out the existing onlink tests are passing because there is no default route or it is an unreachable default, so update the onlink tests to have a default route other than unreachable. Fixes: fc1e64e1092f6 ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24selftests/ftrace: Strip escape sequences for log fileMasami Hiramatsu
Strip escape sequences from the stream to the ftracetest summary log file. Note that all test-case results are dumped raw in each file. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Use colored output when availableDaniel Díaz
If test is being directly executed (with stdout opened on the terminal) and the terminal capabilities indicate enough colors, then use the existing scheme of green, red, and blue to show when tests pass, fail or end in a different way. When running the tests redirecting the stdout, for instance, to a file, then colors are not shown, thus producing a more readable output. Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests: fix warning: "_GNU_SOURCE" redefinedPeng Hao
Makefile contains -D_GNU_SOURCE. remove define "_GNU_SOURCE" in c files. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests: kvm: Fix -Wformat warningsAndrea Parri
Fixes the following warnings: dirty_log_test.c: In function ‘help’: dirty_log_test.c:216:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=] printf(" -i: specify iteration counts (default: %"PRIu64")\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from include/test_util.h:18:0, from dirty_log_test.c:16: /usr/include/inttypes.h:105:34: note: format string is defined here # define PRIu64 __PRI64_PREFIX "u" dirty_log_test.c:218:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=] printf(" -I: specify interval in ms (default: %"PRIu64" ms)\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from include/test_util.h:18:0, from dirty_log_test.c:16: /usr/include/inttypes.h:105:34: note: format string is defined here # define PRIu64 __PRI64_PREFIX "u" Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add color to the PASS / FAIL resultsSteven Rostedt (VMware)
Now that ftracetest has over 80 tests, it is difficult to simply scroll up the console window to find the failed tests when it reports just two tests have failed. In order to make this stand out better, have the color of the word "PASS" be green, "FAIL" and "XFAIL" be red, and all other results be blue. This helps tremendously in quickly spotting the failed tests by just scrolling up the console window. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24kvm: selftests: fix spelling mistake "Insufficent" -> "Insufficient"Colin Ian King
Trivial fix to spelling mistake in TEST_ASSERT message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests: gpio: Fix OUTPUT directory in MakefileDaniel Díaz
When simply running `make' from the selftests top dir, this error shows up: cc -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/uuid gpio-mockup-chardev.c ../../../gpio/gpio-utils.o -lmount -o gpio-mockup-chardev cc: error: ../../../gpio/gpio-utils.o: No such file or directory <builtin>: recipe for target 'gpio-mockup-chardev' failed make[1]: *** [gpio-mockup-chardev] Error 1 because the output directory is set to "selftests/gpio" and all binaries built from ../../../gpio/ end up there. In fact, they appear as, exempli gratia: * gpiogpio-event-mon * gpiogpio-hammer * gpioinclude/ * gpiolsgpio which is wrong, as it's missing a directory separator somewhere. This patch sets straight the output directory when building ../../../gpio/ so that binaries don't cross paths. Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests: gpio: restructure MakefileFathi Boudra
This patch cleans up the Makefile by restructuring a couple of things, namely: 1) change explicit paths in targets for variables 2) substitute a variable (BINARIES) for another, part of the selftests build system (TEST_PROGS_EXTENDED) 3) proper cleaning up of the EXTRA objects The resulting Makefile is much more readable and manageable. Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit pathShuah Khan (Samsung OSG)
When ioctls for WDIOC_SETOPTIONS (WDIOS_DISABLECARD or WDIOS_ENABLECARD), WDIOC_SETTIMEOUT, and WDIOC_SETPRETIMEOUT fail, the error path continues to handler watchdog timer until user terminates it. When ioctl returns error, it might not be safe to let the watchdog tick. The error could be due an unsupported ioctl command or some other error. Fix it to handle error paths as oneshot to stop the watchdog ticks and exit right away. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests: watchdog: Add gettimeout and get|set pretimeoutJerry Hoemann
Add command line arguments to call ioctl WDIOC_GETTIMEOUT, WDIOC_GETPRETIMEOUT and WDIOC_SETPRETIMEOUT. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests: watchdog: Fix error message.Jerry Hoemann
Printf's say errno but print the string version of error. Make consistent. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests: watchdog: fix message when /dev/watchdog open failsShuah Khan (Samsung OSG)
When /dev/watchdog open fails, watchdog exits with "watchdog not enabled" message. This is incorrect when open fails due to insufficient privilege. Fix message to clearly state the reason when open fails with EACCESS when a non-root user runs it. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add ftrace cpumask testcaseMasami Hiramatsu
Add a testcase for tracing_cpumask with function tracer. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add wakeup_rt tracer testcaseMasami Hiramatsu
Add a testcase for wakeup_rt tracer. This requires chrt command to test. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add wakeup tracer testcaseMasami Hiramatsu
Add a testcase for wakeup tracer. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add stacktrace ftrace filter command testcaseMasami Hiramatsu
Add a test case for stacktrace filter command for ftrace. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add trace_pipe testcaseMasami Hiramatsu
Add a simple testcase for trace_pipe which can consume ringbuffer. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add function filter on module testcaseMasami Hiramatsu
Add a testcase for function filter on module. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add max stack tracer testcaseMasami Hiramatsu
Add a testcase for max stack tracer, which checks basic max stack usage tracing and its filter feature. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add function profiling stat testcaseMasami Hiramatsu
Add a testcase for function profiling per-cpu statistics interface. There is already func_profile.tc, but that is mainly focusing on the combination of function-profiler and function tracer. This testcase ensures trace_stat per-cpu function statistics is correctly updated. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add ringbuffer size changing testcaseMasami Hiramatsu
Add a testcase for changing ringbuffer size. This tests not only ringbuffer size but also tests the imbalance per-cpu buffer size change too. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add trace_printk sample module testMasami Hiramatsu
Add trace_printk sample module test. This requires to enable trace_printk.ko module for test. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add kprobe-event with symbol argument testMasami Hiramatsu
Add a testcase for kprobe-event with @symbol argument. Since @symbol needs to refer the kernel data symbol (linux_proc_banner), it requires CONFIG_KALLSYMS_ALL. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add kprobe profile testcaseMasami Hiramatsu
Add a testcase for testing kprobe_profile interface which provides per-kprobe event hit/misshit counts. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add kprobe event with $comm argument testcaseMasami Hiramatsu
Add kprobe-event with $comm argument testcase to ftracetest. This not only checks syntax but also checks log file. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Check set_event_pid resultMasami Hiramatsu
Ensure the set_event_pid shows set pid list. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Test kprobe-event argument with various bitsizeMasami Hiramatsu
Improve the kprobe-event with argument types testcase to test it with various bitsize. kprobe-event argument can be recorded in given types with various bitsize (8, 16, 32, 64), thus the type testcase should test the different bitsize too. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Improve kretprobe testcase to check log dataMasami Hiramatsu
Improve kretprobe testcase to check the log data correctness and ensure the event definition is corrctly including argument definition. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Improve kprobe testcase to check log dataMasami Hiramatsu
Improve kprobe testcase to check the log data correctness and ensure the event definition is corrctly including argument definition. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Improve kprobe on module testcase to load/unload moduleMasami Hiramatsu
Improve kprobe events on module testcase to check module load/unload with disabled/enabled events. This also change the target module to trace_printk.ko, so it depends on CONFIG_SAMPLE_TRACE_PRINTK=m. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Use loopback address instead of localhostMasami Hiramatsu
Use raw loopback address instead of localhost, because "localhost" can depend on nsswitch and in some case we can not resolve the localhost. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Fix checkbashisms errorsMasami Hiramatsu
Fix a test case to make checkbashisms clean. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Fix to test kprobe $comm arg only if availableMasami Hiramatsu
Test $comm in kprobe-event argument syntax testcase only if it is supported on the kernel because $comm has been introduced 4.8 kernel. So on older stable kernel, it should be skipped. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Remove unneeded per-test init/cleanup ftraceMasami Hiramatsu
Since ftracetest framework calls initialize_ftrace() right before each test and after all tests, we don't need to init/cleanup ftrace for each test case. Just remove such unneeded init/cleanup code because it can increase logfile size. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Cleanup ftrace after running testMasami Hiramatsu
Cleanup ftrace by initialize_ftrace() after running all test cases. This means we also don't need cleanup ftrace on each test case, except for some special options. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add SPDX License Identifier to templateMasami Hiramatsu
Add SPDX License Identifier line to template file so that someone who makes new testcase from the template does not forgot it. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: More initialize features in initialize_ftraceMasami Hiramatsu
Clear pid filter, synthetic_events, snapshots, ftrace filter, and trace log in initialize_ftrace(), since those are used in test cases. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add case number prefix to logfileMasami Hiramatsu
Add a case number prefix to each logfile. This makes it easier to find which logfile is corresponding to which failure. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add --console hidden optionMasami Hiramatsu
Add --console hidden option for debug test cases. This option allows to put "sh" or something else when the test case hits a bug. For example, if you find a testcase which doesn't pass, you can insert sh for interactive debug as below ----- #!/bin/sh # description: sample test case good-command suspicious-wrong-command sh # <- add this for interactive debug ----- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24selftests/ftrace: Add --stop-fail hidden option for debugMasami Hiramatsu
Add --stop-fail option for debugging the ftracetest. With this option, ftracetest stops right after a testcase fails instead of finish running all testcases. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-24perf script: Support total cycles countAndi Kleen
For 'perf script' brstackinsn also print a running cycles count. This makes it easier to calculate cycle deltas for code sections measured with LBRs. % perf record -b -a sleep 1 % perf script -F +brstackinsn ... 00007f73ecc41083 insn: 74 06 # PRED 9 cycles [17] 1.11 IPC 00007f73ecc4108b insn: a8 10 00007f73ecc4108d insn: 74 71 # PRED 1 cycles [18] 1.00 IPC 00007f73ecc41100 insn: 48 8b 46 10 00007f73ecc41104 insn: 4c 8b 38 00007f73ecc41107 insn: 4d 85 ff 00007f73ecc4110a insn: 0f 84 b0 00 00 00 00007f73ecc41110 insn: 83 43 58 01 00007f73ecc41114 insn: 48 89 df 00007f73ecc41117 insn: e8 94 73 04 00 # PRED 6 cycles [24] 1.00 IPC Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Link: http://lkml.kernel.org/r/20180924170732.GA28040@tassilo.jf.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-24perf script: Implement --graph-functionAndi Kleen
Add a ftrace style --graph-function argument to 'perf script' that allows to print itrace function calls only below a given function. This makes it easier to find the code of interest in a large trace. % perf record -e intel_pt//k -a sleep 1 % perf script --graph-function group_sched_in --call-trace perf 900 [000] 194167.205652203: ([kernel.kallsyms]) group_sched_in perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax perf 900 [000] 194167.205652203: ([kernel.kallsyms]) event_sched_in.isra.107 perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_set_state.part.71 perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_time perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_disable perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_log_itrace_start perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_userpage perf 900 [000] 194167.205652203: ([kernel.kallsyms]) calc_timer_values perf 900 [000] 194167.205652203: ([kernel.kallsyms]) sched_clock_cpu perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax perf 900 [000] 194167.205652203: ([kernel.kallsyms]) arch_perf_update_userpage perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __fentry__ perf 900 [000] 194167.205652203: ([kernel.kallsyms]) using_native_sched_clock perf 900 [000] 194167.205652203: ([kernel.kallsyms]) sched_clock_stable perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_enable perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) group_sched_in swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) event_sched_in.isra.107 swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_set_state.part.71 swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_update_time swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_pmu_disable swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_log_itrace_start swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_update_userpage swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) calc_timer_values swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) sched_clock_cpu swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) arch_perf_update_userpage swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __fentry__ swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) using_native_sched_clock swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) sched_clock_stable Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Leo Yan <leo.yan@linaro.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Link: http://lkml.kernel.org/r/20180920180540.14039-5-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-24tools script: Add --call-trace and --call-ret-traceAndi Kleen
Add short cut options to print PT call trace and call-ret-trace, for calls and call and returns. Roughly corresponds to ftrace function tracer and function graph tracer. Just makes these common use cases nicer to use. % perf record -a -e intel_pt// sleep 1 % perf script --call-trace perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_enable perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax perf 900 [000] 194167.205652203: ([kernel.kallsyms]) event_filter_match perf 900 [000] 194167.205652203: ([kernel.kallsyms]) group_sched_in perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax perf 900 [000] 194167.205652203: ([kernel.kallsyms]) event_sched_in.isra.107 perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_set_state.part.71 perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_time perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_disable perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_log_itrace_start perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_userpage % perf script --call-ret-trace perf 900 [000] 194167.205652203: tr strt ([unknown]) pt_config perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) pt_config perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) pt_event_add perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) perf_pmu_enable perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) perf_pmu_nop_void perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) event_sched_in.isra.107 perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) __x86_indirect_thunk_rax perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) perf_pmu_nop_int perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) group_sched_in perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) event_filter_match perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) event_filter_match perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) group_sched_in perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) __x86_indirect_thunk_rax perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) perf_pmu_nop_txn perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) event_sched_in.isra.107 perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) perf_event_set_state.part.71 Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Leo Yan <leo.yan@linaro.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Link: http://lkml.kernel.org/r/20180920180540.14039-4-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-24perf script: Make itrace script default to all callsAndi Kleen
By default 'perf script' for itrace outputs sampled instructions or branches. In my experience this is confusing to users because it's hard to correlate with real program behavior. The sampling makes sense for tools like 'perf report' that actually sample to reduce the run time, but run time is normally not a problem for 'perf script'. It's better to give an accurate representation of the program flow. Default 'perf script' to output all calls for itrace. That's a much saner default. The old behavior can be still requested with 'perf script' --itrace=ibxwpe100000 v2: Fix ETM build failure v3: Really fix ETM build failure (Kim Phillips) Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Leo Yan <leo.yan@linaro.org> Link: http://lkml.kernel.org/r/20180920180540.14039-3-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-24perf script: Add --insn-trace for instruction decodingAndi Kleen
Add a --insn-trace short hand option for decoding and disassembling instruction streams for intel_pt. This automatically pipes the output into the xed disassembler to generate disassembled instructions. This just makes this use model much nicer to use. Before % perf record -e intel_pt// ... % perf script --itrace=i0ns --ns -F +insn,-event,-period | xed -F insn: -A -64 swapper 0 [000] 17276.429606186: ffffffff81010486 pt_config ([kernel.kallsyms]) nopl %eax, (%rax,%rax,1) swapper 0 [000] 17276.429606186: ffffffff8101048b pt_config ([kernel.kallsyms]) add $0x10, %rsp swapper 0 [000] 17276.429606186: ffffffff8101048f pt_config ([kernel.kallsyms]) popq %rbx swapper 0 [000] 17276.429606186: ffffffff81010490 pt_config ([kernel.kallsyms]) popq %rbp swapper 0 [000] 17276.429606186: ffffffff81010491 pt_config ([kernel.kallsyms]) popq %r12 swapper 0 [000] 17276.429606186: ffffffff81010493 pt_config ([kernel.kallsyms]) popq %r13 swapper 0 [000] 17276.429606186: ffffffff81010495 pt_config ([kernel.kallsyms]) popq %r14 swapper 0 [000] 17276.429606186: ffffffff81010497 pt_config ([kernel.kallsyms]) popq %r15 swapper 0 [000] 17276.429606186: ffffffff81010499 pt_config ([kernel.kallsyms]) retq swapper 0 [000] 17276.429606186: ffffffff8101063e pt_event_add ([kernel.kallsyms]) cmpl $0x1, 0x1b0(%rbx) swapper 0 [000] 17276.429606186: ffffffff81010645 pt_event_add ([kernel.kallsyms]) mov $0xffffffea, %eax swapper 0 [000] 17276.429606186: ffffffff8101064a pt_event_add ([kernel.kallsyms]) mov $0x0, %edx swapper 0 [000] 17276.429606186: ffffffff8101064f pt_event_add ([kernel.kallsyms]) popq %rbx swapper 0 [000] 17276.429606186: ffffffff81010650 pt_event_add ([kernel.kallsyms]) cmovnz %edx, %eax swapper 0 [000] 17276.429606186: ffffffff81010653 pt_event_add ([kernel.kallsyms]) jmp 0xffffffff81010635 swapper 0 [000] 17276.429606186: ffffffff81010635 pt_event_add ([kernel.kallsyms]) retq swapper 0 [000] 17276.429606186: ffffffff8115e687 event_sched_in.isra.107 ([kernel.kallsyms]) test %eax, %eax Now: % perf record -e intel_pt// ... % perf script --insn-trace --xed ... same output ... XED needs to be installed with: $ git clone https://github.com/intelxed/mbuild.git mbuild $ git clone https://github.com/intelxed/xed $ cd xed $ ./mfile.py $ ./mfile.py examples $ sudo ./mfile.py --prefix=/usr/local install $ sudo cp obj/examples/xed /usr/local/bin $ xed | head -3 ERROR: required argument(s) were missing Copyright (C) 2017, Intel Corporation. All rights reserved. XED version: [v10.0-328-g7d62c8c49b7b] $ Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20180920180540.14039-2-andi@firstfloor.org [ Fixed up whitespace damage, added the 'mfile.py examples + cp obj/examples/xed ... ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson. 2) Add zero-copy AF_XDP support to i40e, from Björn Töpel. 3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we can get rid of the {g,s}et_settings ethtool callbacks, from Michal Kubecek. 4) Add software timestamping to veth driver, from Michael Walle. 5) More work to make packet classifiers and actions lockless, from Vlad Buslov. 6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov. 7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks. 8) Support batching of XDP buffers in vhost_net, from Jason Wang. 9) Add flow dissector BPF hook, from Petar Penkov. 10) i40e vf --> generic iavf conversion, from Jesse Brandeburg. 11) Add NLA_REJECT netlink attribute policy type, to signal when users provide attributes in situations which don't make sense. From Johannes Berg. 12) Switch TCP and fair-queue scheduler over to earliest departure time model. From Eric Dumazet. 13) Improve guest receive performance by doing rx busy polling in tx path of vhost networking driver, from Tonghao Zhang. 14) Add per-cgroup local storage to bpf 15) Add reference tracking to BPF, from Joe Stringer. The verifier can now make sure that references taken to objects are properly released by the program. 16) Support in-place encryption in TLS, from Vakul Garg. 17) Add new taprio packet scheduler, from Vinicius Costa Gomes. 18) Lots of selftests additions, too numerous to mention one by one here but all of which are very much appreciated. 19) Support offloading of eBPF programs containing BPF to BPF calls in nfp driver, frm Quentin Monnet. 20) Move dpaa2_ptp driver out of staging, from Yangbo Lu. 21) Lots of u32 classifier cleanups and simplifications, from Al Viro. 22) Add new strict versions of netlink message parsers, and enable them for some situations. From David Ahern. 23) Evict neighbour entries on carrier down, also from David Ahern. 24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann and John Fastabend. 25) Add support for filtering route dumps, from David Ahern. 26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al. 27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido Schimmel. 28) Add queue and stack map types to eBPF, from Mauricio Vasquez B. 29) Add back byte-queue-limit support to r8169, with all the bug fixes in other areas of the driver it works now! From Florian Westphal and Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits) tcp: add tcp_reset_xmit_timer() helper qed: Fix static checker warning Revert "be2net: remove desc field from be_eq_obj" Revert "net: simplify sock_poll_wait" net: socionext: Reset tx queue in ndo_stop net: socionext: Add dummy PHY register read in phy_write() net: socionext: Stop PHY before resetting netsec net: stmmac: Set OWN bit for jumbo frames arm64: dts: stratix10: Support Ethernet Jumbo frame tls: Add maintainers net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes octeontx2-af: Support for setting MAC address octeontx2-af: Support for changing RSS algorithm octeontx2-af: NIX Rx flowkey configuration for RSS octeontx2-af: Install ucast and bcast pkt forwarding rules octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response octeontx2-af: NPC MCAM and LDATA extract minimal configuration octeontx2-af: Enable packet length and csum validation octeontx2-af: Support for VTAG strip and capture ...
2018-10-23perf scripts python: exported-sql-viewer.py: Add All branches reportAdrian Hunter
Add a report to display branches in a similar fashion to perf script. The main purpose of this report is to display disassembly, however, presently, the only supported disassembler is Intel XED, and additionally the object code must be present in perf build ID cache. To use Intel XED, libxed.so must be present. To build and install libxed.so: git clone https://github.com/intelxed/mbuild.git mbuild git clone https://github.com/intelxed/xed cd xed ./mfile.py --share sudo ./mfile.py --prefix=/usr/local install sudo ldconfig Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20181023075949.18920-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-23perf scripts python: exported-sql-viewer.py: Add ability to display all the ↵Adrian Hunter
database tables Displaying all the database tables can help make the database easier to understand. Committer testing: Opened all the tables, even the sqlite master table, which I selected everything and used control+C, lets see if it works... CREATE VIEW threads_view AS SELECT id,machine_id,(SELECT host_or_guest FROM machines_view WHERE id = machine_id) AS host_or_guest,process_id,pid,tid FROM threads Humm, nope, just one of the cells got copied, even with everything selected :-) Anyway, works as advertised, useful for perusing the data. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20181001062853.28285-17-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 16:03:32 +0000