| Age | Commit message (Collapse) | Author |
|---|
|
Add a small test to write a (verification-time) fixed vs unknown but
bounded-sized buffer into .rodata BPF map and assert that both get
rejected.
# ./vmtest.sh -- ./test_progs -t verifier_const
[...]
./test_progs -t verifier_const
[ 1.418717] tsc: Refined TSC clocksource calibration: 3407.994 MHz
[ 1.419113] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcde90a1, max_idle_ns: 440795222066 ns
[ 1.419972] clocksource: Switched to clocksource tsc
[ 1.449596] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.449958] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#475/1 verifier_const/rodata/strtol: write rejected:OK
#475/2 verifier_const/bss/strtol: write accepted:OK
#475/3 verifier_const/data/strtol: write accepted:OK
#475/4 verifier_const/rodata/mtu: write rejected:OK
#475/5 verifier_const/bss/mtu: write accepted:OK
#475/6 verifier_const/data/mtu: write accepted:OK
#475/7 verifier_const/rodata/mark: write with unknown reg rejected:OK
#475/8 verifier_const/rodata/mark: write with unknown reg rejected:OK
#475 verifier_const:OK
#476/1 verifier_const_or/constant register |= constant should keep constant type:OK
#476/2 verifier_const_or/constant register |= constant should not bypass stack boundary checks:OK
#476/3 verifier_const_or/constant register |= constant register should keep constant type:OK
#476/4 verifier_const_or/constant register |= constant register should not bypass stack boundary checks:OK
#476 verifier_const_or:OK
Summary: 2/12 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241021152809.33343-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Change ynl-gen-c.py to use NLA_BE16 and NLA_BE32 types to represent
big-endian u16 and u32 ynl types.
Doing this enables those attributes to have range checks applied, as
the validator will then convert to host endianness prior to validation.
The autogenerated kernel/uapi code have been regenerated by running:
./tools/net/ynl/ynl-regen.sh -f
This changes the policy types of the following attributes:
FOU_ATTR_PORT (NLA_U16 -> NLA_BE16)
FOU_ATTR_PEER_PORT (NLA_U16 -> NLA_BE16)
These two are used with nla_get_be16/nla_put_be16().
MPTCP_PM_ADDR_ATTR_ADDR4 (NLA_U32 -> NLA_BE32)
This one is used with nla_get_in_addr/nla_put_in_addr(),
which uses nla_get_be32/nla_put_be32().
IOWs the generated changes are AFAICT aligned with their implementations.
The generated userspace code remains identical, and have been verified
by comparing the output generated by the following command:
make -C tools/net/ynl/generated
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241017094704.3222173-1-ast@fiberby.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the defer framework to schedule cleanups as soon as the command is
executed.
Note that the start_traffic commands in __burst_test() are each sending a
fixed number of packets (note the -c flag) and then ending. They therefore
do not need a matching stop_traffic.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of having a suite of dedicated cleanup functions, use the defer
framework to schedule cleanups right as their setup functions are run.
The sleep after stop_traffic() in mlxsw selftests is necessary, but
scheduling it as "defer sleep; defer stop_traffic" is silly. Instead, add a
local helper to stop traffic and sleep afterwards.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that it is possible to schedule a deferral of stop_traffic() right
after the traffic is started, we do not have to rely on the %% magic to
kill the background process that was started last. Instead we can just give
the PID explicitly. This makes it possible to start other background
processes after the traffic is started without confusing the cleanup.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Consistent use of defers obviates the need for a separate test-specific
cleanup function -- everything is just taken care of in defers. So in this
patch, introduce a cleanup() helper in the forwarding lib.sh, which calls
just pre_cleanup() and defer_scopes_cleanup(). Selftests are obviously
still free to override the function.
Since pre_cleanup() is too entangled with forwarding-specific minutia, the
function cannot currently be in net/lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In commit 8510801a9dbd ("selftests: drv-net: add ability to schedule
cleanup with defer()"), a defer helper was added to Python selftests.
The idea is to keep cleanup commands close to their dirtying counterparts,
thereby making it more transparent what is cleaning up what, making it
harder to miss a cleanup, and make the whole cleanup business exception
safe. All these benefits are applicable to bash as well, exception safety
can be interpreted in terms of safety vs. a SIGINT.
This patch therefore introduces a framework of several helpers that serve
to schedule cleanups in bash selftests:
- defer_scope_push(), defer_scope_pop(): Deferred statements can be batched
together in scopes. When a scope is popped, the deferred commands
scheduled in that scope are executed in the order opposite to order of
their scheduling.
- defer(): Schedules a defer to the most recently pushed scope (or the
default scope if none was pushed.)
- defer_prio(): Schedules a defer on the priority track. The priority defer
queue is run before the default defer queue when scope is popped.
The issue that this is addressing is specifically the one of restoring
devlink shared buffer threshold type. When setting up static thresholds,
one has to first change the threshold type to static, then override the
individual thresholds. When cleaning up, it would be natural to reset the
threshold values first, then change the threshold type. But the values
that are valid for dynamic thresholds are generally invalid for static
thresholds and vice versa. Attempts to restore the values first would be
bounced. Thus one has to first reset the threshold type, then adjust the
thresholds.
(You could argue that the shared buffer threshold type API is broken and
you would be right, but here we are.)
This cannot be solved by pure defers easily. I considered making it
possible to disable an existing defer, so that one could then schedule a
new defer and disable the original. But this forward-shifting of the
defer job would have to take place after every threshold-adjusting
command, which would make it very awkward to schedule these jobs.
- defer_scopes_cleanup(): Pops any unpopped scopes, including the default
one. The selftests that use defer should run this in their exit trap.
This is important to get cleanups of interrupted scripts.
- in_defer_scope(): Sometimes a function would like to introduce a new
defer scope, then run whatever it is that it wants to run, and then pop
the scope to run the deferred cleanups. The helper in_defer_scope() can
be used to run another command within such environment, such that any
scheduled defers run after the command finishes.
The framework is added as a separate file lib/sh/defer.sh so that it can be
used by all bash selftests, including those that do not currently use
lib.sh. lib.sh however includes the file by default, because ideally all
tests would use these helpers instead of hand-rolling their cleanups.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 9a400068a158 ("KVM: selftests: x86: Avoid using SSE/AVX
instructions") unconditionally added -march=x86-64-v2 to the CFLAGS used
to build the KVM selftests which does not work on non-x86 architectures:
cc1: error: unknown value ‘x86-64-v2’ for ‘-march’
Fix this by making the addition of this x86 specific command line flag
conditional on building for x86.
Fixes: 9a400068a158 ("KVM: selftests: x86: Avoid using SSE/AVX instructions")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that btf_skc_cls_ingress has the same coverage as
test_tcp_check_syncookie, remove the second one and keep the first one
as it is integrated in test_progs
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-6-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
One remaining difference between test_tcp_check_syncookie.sh and
btf_skc_cls_ingress is a small test on the mss value embedded in the
cookie generated with the eBPF helper.
Bring the corresponding test in btf_skc_cls_ingress.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-5-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
btf_skc_cls_ingress test currently checks that syncookie and
bpf_sk_assign/release helpers behave correctly in multiple scenarios,
but only with ipv6 socket.
Increase those helpers coverage by adding testing support for IPv4
sockets and IPv4/IPv6 sockets. The rework is mostly based on features
brought earlier in test_tcp_check_syncookie.sh to cover some fixes
performed on those helpers, but test_tcp_check_syncookie.sh is not
integrated in test_progs. The most notable changes linked to this are:
- some rework in the corresponding eBPF program to support both types of
traffic
- the switch from start_server to start_server_str to allow to check
some socket options
- the introduction of new subtests for ipv4 and ipv4/ipv6
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-4-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
There are a few global variables in btf_skc_cls_ingress.c, which are not
really used by different tests. Get rid of those global variables, by
performing the following updates:
- make srv_sa6 local to the main runner function
- make skel local to the main function, and propagate it through
function arguments
- get rid of duration by replacing CHECK macros with the ASSERT_XXX
macros. While updating those assert macros:
- do not return early on asserts performing some actual tests, let the
other tests run as well (keep the early return for parts handling
test setup)
- instead of converting the CHECK on skel->bss->linum, just remove it,
since there is already a call to print_err_line after the test to
print the failing line in the bpf program
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-3-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
btf_skc_cls_ingress.c currently runs two subtests, and create a
dedicated network namespace for each, but never cleans up the created
namespace once the test has ended.
Add missing namespace cleanup after each subtest to avoid accumulating
namespaces for each new subtest. While at it, switch namespace
management to netns_{new,free}
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-2-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
btf_skc_cls_ingress currently describe two tests, both running a simple
tcp server and then initializing a connection to it. The sole difference
between the tests is about the tcp_syncookie configuration, and some
checks around this feature being enabled/disabled.
Share the common code between those two tests by moving the code into a
single runner, parameterized by a "gen_cookies" argument. Split the
performed checks accordingly.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-1-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix the guest view of the ID registers, making the relevant fields
writable from userspace (affecting ID_AA64DFR0_EL1 and
ID_AA64PFR1_EL1)
- Correcly expose S1PIE to guests, fixing a regression introduced in
6.12-rc1 with the S1POE support
- Fix the recycling of stage-2 shadow MMUs by tracking the context
(are we allowed to block or not) as well as the recycling state
- Address a couple of issues with the vgic when userspace
misconfigures the emulation, resulting in various splats. Headaches
courtesy of our Syzkaller friends
- Stop wasting space in the HYP idmap, as we are dangerously close to
the 4kB limit, and this has already exploded in -next
- Fix another race in vgic_init()
- Fix a UBSAN error when faking the cache topology with MTE enabled
RISCV:
- RISCV: KVM: use raw_spinlock for critical section in imsic
x86:
- A bandaid for lack of XCR0 setup in selftests, which causes trouble
if the compiler is configured to have x86-64-v3 (with AVX) as the
default ISA. Proper XCR0 setup will come in the next merge window.
- Fix an issue where KVM would not ignore low bits of the nested CR3
and potentially leak up to 31 bytes out of the guest memory's
bounds
- Fix case in which an out-of-date cached value for the segments
could by returned by KVM_GET_SREGS.
- More cleanups for KVM_X86_QUIRK_SLOT_ZAP_ALL
- Override MTRR state for KVM confidential guests, making it WB by
default as is already the case for Hyper-V guests.
Generic:
- Remove a couple of unused functions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (27 commits)
RISCV: KVM: use raw_spinlock for critical section in imsic
KVM: selftests: Fix out-of-bounds reads in CPUID test's array lookups
KVM: selftests: x86: Avoid using SSE/AVX instructions
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory
KVM: VMX: reset the segment cache after segment init in vmx_vcpu_reset()
KVM: x86: Clean up documentation for KVM_X86_QUIRK_SLOT_ZAP_ALL
KVM: x86/mmu: Add lockdep assert to enforce safe usage of kvm_unmap_gfn_range()
KVM: x86/mmu: Zap only SPs that shadow gPTEs when deleting memslot
x86/kvm: Override default caching mode for SEV-SNP and TDX
KVM: Remove unused kvm_vcpu_gfn_to_pfn_atomic
KVM: Remove unused kvm_vcpu_gfn_to_pfn
KVM: arm64: Ensure vgic_ready() is ordered against MMIO registration
KVM: arm64: vgic: Don't check for vgic_ready() when setting NR_IRQS
KVM: arm64: Fix shift-out-of-bounds bug
KVM: arm64: Shave a few bytes from the EL2 idmap code
KVM: arm64: Don't eagerly teardown the vgic on init error
KVM: arm64: Expose S1PIE to guests
KVM: arm64: nv: Clarify safety of allowing TLBI unmaps to reschedule
KVM: arm64: nv: Punt stage-2 recycling to a vCPU request
KVM: arm64: nv: Do not block when unmapping stage-2 if disallowed
...
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c1e ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c41c ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #2
- Fix the guest view of the ID registers, making the relevant fields
writable from userspace (affecting ID_AA64DFR0_EL1 and ID_AA64PFR1_EL1)
- Correcly expose S1PIE to guests, fixing a regression introduced
in 6.12-rc1 with the S1POE support
- Fix the recycling of stage-2 shadow MMUs by tracking the context
(are we allowed to block or not) as well as the recycling state
- Address a couple of issues with the vgic when userspace misconfigures
the emulation, resulting in various splats. Headaches courtesy
of our Syzkaller friends
|
|
When looking for a "mangled", i.e. dynamic, CPUID entry, terminate the
walk based on the number of array _entries_, not the size in bytes of
the array. Iterating based on the total size of the array can result in
false passes, e.g. if the random data beyond the array happens to match
a CPUID entry's function and index.
Fixes: fb18d053b7f8 ("selftest: kvm: x86: test KVM_GET_CPUID2 and guest visible CPUIDs against KVM_GET_SUPPORTED_CPUID")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-ID: <20241003234337.273364-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Some distros switched gcc to '-march=x86-64-v3' by default and while it's
hard to find a CPU which doesn't support it today, many KVM selftests fail
with
==== Test Assertion Failure ====
lib/x86_64/processor.c:570: Unhandled exception in guest
pid=72747 tid=72747 errno=4 - Interrupted system call
Unhandled exception '0x6' at guest RIP '0x4104f7'
The failure is easy to reproduce elsewhere with
$ make clean && CFLAGS='-march=x86-64-v3' make -j && ./x86_64/kvm_pv_test
The root cause of the problem seems to be that with '-march=x86-64-v3' GCC
uses AVX* instructions (VMOVQ in the example above) and without prior
XSETBV() in the guest this results in #UD. It is certainly possible to add
it there, e.g. the following saves the day as well:
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-ID: <20240920154422.2890096-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix BPF verifier to not affect subreg_def marks in its range
propagation (Eduard Zingerman)
- Fix a truncation bug in the BPF verifier's handling of
coerce_reg_to_size_sx (Dimitar Kanaliev)
- Fix the BPF verifier's delta propagation between linked registers
under 32-bit addition (Daniel Borkmann)
- Fix a NULL pointer dereference in BPF devmap due to missing rxq
information (Florian Kauer)
- Fix a memory leak in bpf_core_apply (Jiri Olsa)
- Fix an UBSAN-reported array-index-out-of-bounds in BTF parsing for
arrays of nested structs (Hou Tao)
- Fix build ID fetching where memory areas backing the file were
created with memfd_secret (Andrii Nakryiko)
- Fix BPF task iterator tid filtering which was incorrectly using pid
instead of tid (Jordan Rome)
- Several fixes for BPF sockmap and BPF sockhash redirection in
combination with vsocks (Michal Luczaj)
- Fix riscv BPF JIT and make BPF_CMPXCHG fully ordered (Andrea Parri)
- Fix riscv BPF JIT under CONFIG_CFI_CLANG to prevent the possibility
of an infinite BPF tailcall (Pu Lehui)
- Fix a build warning from resolve_btfids that bpf_lsm_key_free cannot
be resolved (Thomas Weißschuh)
- Fix a bug in kfunc BTF caching for modules where the wrong BTF object
was returned (Toke Høiland-Jørgensen)
- Fix a BPF selftest compilation error in cgroup-related tests with
musl libc (Tony Ambardar)
- Several fixes to BPF link info dumps to fill missing fields (Tyrone
Wu)
- Add BPF selftests for kfuncs from multiple modules, checking that the
correct kfuncs are called (Simon Sundberg)
- Ensure that internal and user-facing bpf_redirect flags don't overlap
(Toke Høiland-Jørgensen)
- Switch to use kvzmalloc to allocate BPF verifier environment (Rik van
Riel)
- Use raw_spinlock_t in BPF ringbuf to fix a sleep in atomic splat
under RT (Wander Lairson Costa)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (38 commits)
lib/buildid: Handle memfd_secret() files in build_id_parse()
selftests/bpf: Add test case for delta propagation
bpf: Fix print_reg_state's constant scalar dump
bpf: Fix incorrect delta propagation between linked registers
bpf: Properly test iter/task tid filtering
bpf: Fix iter/task tid filtering
riscv, bpf: Make BPF_CMPXCHG fully ordered
bpf, vsock: Drop static vsock_bpf_prot initialization
vsock: Update msg_count on read_skb()
vsock: Update rx_bytes on read_skb()
bpf, sockmap: SK_DROP on attempted redirects of unsupported af_vsock
selftests/bpf: Add asserts for netfilter link info
bpf: Fix link info netfilter flags to populate defrag flag
selftests/bpf: Add test for sign extension in coerce_subreg_to_size_sx()
selftests/bpf: Add test for truncation after sign extension in coerce_reg_to_size_sx()
bpf: Fix truncation bug in coerce_reg_to_size_sx()
selftests/bpf: Assert link info uprobe_multi count & path_size if unset
bpf: Fix unpopulated path_size when uprobe_multi fields unset
selftests/bpf: Fix cross-compiling urandom_read
selftests/bpf: Add test for kfunc module order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
- fix test makefile to install tests directory without which the test
fails with errors
* tag 'linux_kselftest-fixes-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftest: hid: add the missing tests directory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"28 hotfixes. 13 are cc:stable. 23 are MM.
It is the usual shower of unrelated singletons - please see the
individual changelogs for details"
* tag 'mm-hotfixes-stable-2024-10-17-16-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
maple_tree: add regression test for spanning store bug
maple_tree: correct tree corruption on spanning store
mm/mglru: only clear kswapd_failures if reclaimable
mm/swapfile: skip HugeTLB pages for unuse_vma
selftests: mm: fix the incorrect usage() info of khugepaged
MAINTAINERS: add Jann as memory mapping/VMA reviewer
mm: swap: prevent possible data-race in __try_to_reclaim_swap
mm: khugepaged: fix the incorrect statistics when collapsing large file folios
MAINTAINERS: kasan, kcov: add bugzilla links
mm: don't install PMD mappings when THPs are disabled by the hw/process/vma
mm: huge_memory: add vma_thp_disabled() and thp_disabled_by_hw()
Docs/damon/maintainer-profile: update deprecated awslabs GitHub URLs
Docs/damon/maintainer-profile: add missing '_' suffixes for external web links
maple_tree: check for MA_STATE_BULK on setting wr_rebalance
mm: khugepaged: fix the arguments order in khugepaged_collapse_file trace point
mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets()
mm: remove unused stub for can_swapin_thp()
mailmap: add an entry for Andy Chiu
MAINTAINERS: add memory mapping/VMA co-maintainers
fs/proc: fix build with GCC 15 due to -Werror=unterminated-string-initialization
...
|
|
Add a small BPF verifier test case to ensure that alu32 additions to
registers are not subject to linked scalar delta tracking.
# ./vmtest.sh -- ./test_progs -t verifier_linked_scalars
[...]
./test_progs -t verifier_linked_scalars
[ 1.413138] tsc: Refined TSC clocksource calibration: 3407.993 MHz
[ 1.413524] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcd52370, max_idle_ns: 440795242006 ns
[ 1.414223] clocksource: Switched to clocksource tsc
[ 1.419640] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.420025] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#500/1 verifier_linked_scalars/scalars: find linked scalars:OK
#500 verifier_linked_scalars:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
[ 1.590858] ACPI: PM: Preparing to enter system sleep state S5
[ 1.591402] reboot: Power down
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20241016134913.32249-3-daniel@iogearbox.net
|
|
Previously test_task_tid was setting `linfo.task.tid`
to `getpid()` which is the same as `gettid()` for the
parent process. Instead create a new child thread
and set `linfo.task.tid` to `gettid()` to make sure
the tid filtering logic is working as expected.
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016210048.1213935-2-linux@jordanrome.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in
vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration
for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers"
* tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5e: Don't call cleanup on profile rollback failure
net/mlx5: Unregister notifier on eswitch init failure
net/mlx5: Fix command bitmask initialization
net/mlx5: Check for invalid vector index on EQ creation
net/mlx5: HWS, use lock classes for bwc locks
net/mlx5: HWS, don't destroy more bwc queue locks than allocated
net/mlx5: HWS, fixed double free in error flow of definer layout
net/mlx5: HWS, removed wrong access to a number of rules variable
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
net: dsa: vsc73xx: fix reception from VLAN-unaware bridges
net: ravb: Only advertise Rx/Tx timestamps if hardware supports it
net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
net: phy: mdio-bcm-unimac: Add BCM6846 support
dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio
udp: Compute L4 checksum as usual when not segmenting the skb
genetlink: hold RCU in genlmsg_mcast()
net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
...
|
|
Add a regression test to assert that, when performing a spanning store
which consumes the entirety of the rightmost right leaf node does not
result in maple tree corruption when doing so.
This achieves this by building a test tree of 3 levels and establishing a
store which ultimately results in a spanned store of this nature.
Link: https://lkml.kernel.org/r/30cdc101a700d16e03ba2f9aa5d83f2efa894168.1728314403.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When adding a explicit beautifier for the 'write' syscall when the BPF
based buffer collector was introduced there was a cut'n'paste error that
carried the syscall_fmt->errpid setting from a nearby syscall (waitid)
that returns a pid.
So the write return was being suppressed by the return pretty printer,
remove that field, reverting it back to the default return handler, that
prints positive numbers as-is and interpret negative values as errnos.
I actually introduced the problem while making Howard's original patch
work just with the 'write' syscall, as we couldn't just look for any
buffers, the ones that are filled in by the kernel couldn't use the same
sys_enter BPF collector.
Fixes: b257fac12f38d7f5 ("perf trace: Pretty print buffer data")
Reported-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/lkml/bcf50648-3c7e-4513-8717-0d14492c53b9@linaro.org
Link: https://lore.kernel.org/all/Zt8jTfzDYgBPvFCd@x1/#t
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
947697c6f0f75f98 ("uapi: Define GENMASK_U128")
That causes no changes in tooling, just addresses this perf build
warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/const.h include/uapi/linux/const.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/lkml/ZwltGNJwujKu1Fgn@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It should be invalid to delete an rss context while it is being
referenced from an ntuple filter. ethtool core should prevent this
from happening. This patch adds a testcase to verify this behavior.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mount option of tmpfs should be huge=advise, not madvise which is not
supported and may mislead the users.
Link: https://lkml.kernel.org/r/20241015020257.139235-1-sunnanyong@huawei.com
Fixes: 1b03d0d558a2 ("selftests/vm: add thp collapse file and tmpfs testing")
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is possible for a bulk operation (MA_STATE_BULK is set) to enter the
new_end < mt_min_slots[type] case and set wr_rebalance as a store type.
This is incorrect as bulk stores do not rebalance per write, but rather
after the all of the writes are done through the mas_bulk_rebalance()
path. Therefore, add a check to make sure MA_STATE_BULK is not set before
we return wr_rebalance as the store type.
Also add a test to make sure wr_rebalance is never the store type when
doing bulk operations via mas_expected_entries()
This is a hotfix for this rc however it has no userspace effects as there
are no users of the bulk insertion mode.
Link: https://lkml.kernel.org/r/20241011214451.7286-1-sidhartha.kumar@oracle.com
Fixes: 5d659bbb52a2 ("maple_tree: introduce mas_wr_store_type()")
Suggested-by: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Sidhartha <sidhartha.kumar@oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On Android with arm, there is some synchronization needed to avoid a
deadlock when forking after pthread_create.
Link: https://lkml.kernel.org/r/20241003211716.371786-3-edliaw@google.com
Fixes: cff294582798 ("selftests/mm: extend and rename uffd pagemap test")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: fix deadlock after pthread_create".
On Android arm, pthread_create followed by a fork caused a deadlock in the
case where the fork required work to be completed by the created thread.
Update the synchronization primitive to use pthread_barrier instead of
atomic_bool.
Apply the same fix to the wp-fork-with-event test.
This patch (of 2):
Swap synchronization primitive with pthread_barrier, so that stdatomic.h
does not need to be included.
The synchronization is needed on Android ARM64; we see a deadlock with
pthread_create when the parent thread races forward before the child has a
chance to start doing work.
Link: https://lkml.kernel.org/r/20241003211716.371786-1-edliaw@google.com
Link: https://lkml.kernel.org/r/20241003211716.371786-2-edliaw@google.com
Fixes: cff294582798 ("selftests/mm: extend and rename uffd pagemap test")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 160c826b4dd0 ("selftest: hid: add missing run-hid-tools-tests.sh")
has added the run-hid-tools-tests.sh script for it to be installed, but
I forgot to add the tests directory together.
If running the test case without the tests directory, will results in
the following error message:
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -t hid:hid-core.sh
/usr/lib/python3.11/site-packages/_pytest/config/__init__.py:331: PluggyTeardownRaisedWarning: A plugin raised an exception during an old-style hookwrapper teardown.
Plugin: helpconfig, Hook: pytest_cmdline_parse
UsageError: usage: __main__.py [options] [file_or_dir] [file_or_dir] [...]
__main__.py: error: unrecognized arguments: --udevd
inifile: None
rootdir: /root/linux/kselftest_install/hid
In fact, the run-hid-tools-tests.sh script uses the scripts in the tests
directory to run tests. The tests directory also needs to be added to be
installed.
Fixes: ffb85d5c9e80 ("selftests: hid: import hid-tools hid-core tests")
Cc: stable@vger.kernel.org
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
txmsg_redir in "Test pull + redirect" case of test_txmsg_pull should be
1 instead of 0.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Function msg_verify_data should have context of bytes_cnt and k instead of
assuming they are zero. Otherwise, test_sockmap with data integrity test
will report some errors. I also fix the logic related to size and index j
1/ 6 sockmap::txmsg test passthrough:FAIL
2/ 6 sockmap::txmsg test redirect:FAIL
7/12 sockmap::txmsg test apply:FAIL
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
13/ 1 sockmap::txmsg test push/pop data:FAIL
...
Pass: 24 Fail: 52
After applying this patch, some of the errors are solved, but for push,
pull and pop, we may need more fixes to msg_verify_data, added a TODO
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
...
Pass: 37 Fail: 15
Besides, added a custom errno EDATAINTEGRITY for msg_verify_data, we
shall not ignore the error in txmsg_cork case.
Fixes: 753fb2ee0934 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Fixes: 16edddfe3c5d ("selftests/bpf: test_sockmap, check test failure")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add assertions/tests to verify `bpf_link_info` fields for netfilter link
are correctly populated.
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20241011193252.178997-2-wudevelops@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- More issues reported in the enable/disable paths on large machines
with many tasks due to scx_tasks_lock being held too long. Break up
the task iterations
- Remove ops.select_cpu() dependency in bypass mode so that a
misbehaving implementation can't live-lock the machine by pushing all
tasks to few CPUs in bypass mode
- Other misc fixes
* tag 'sched_ext-for-6.12-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove unnecessary cpu_relax()
sched_ext: Don't hold scx_tasks_lock for too long
sched_ext: Move scx_tasks_lock handling into scx_task_iter helpers
sched_ext: bypass mode shouldn't depend on ops.select_cpu()
sched_ext: Move scx_buildin_idle_enabled check to scx_bpf_select_cpu_dfl()
sched_ext: Start schedulers with consistent p->scx.slice values
Revert "sched_ext: Use shorter slice while bypassing"
sched_ext: use correct function name in pick_task_scx() warning message
selftests: sched_ext: Add sched_ext as proper selftest target
|
|
Add a test for unsigned ranges after signed extension instruction. This
case isn't currently covered by existing tests in verifier_movsx.c.
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Dimitar Kanaliev <dimitar.kanaliev@siteground.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241014121155.92887-4-dimitar.kanaliev@siteground.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
coerce_reg_to_size_sx()
Add test that checks whether unsigned ranges deduced by the verifier for
sign extension instruction is correct. Without previous patch that
fixes truncation in coerce_reg_to_size_sx() this test fails.
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Dimitar Kanaliev <dimitar.kanaliev@siteground.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241014121155.92887-3-dimitar.kanaliev@siteground.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Explicitly verify that MPC connection attempts towards a port-based
signal endpoint fail with a reset.
Note that this new test is a bit different from the other ones, not
using 'run_tests'. It is then needed to add the capture capability, and
the picking the right port which have been extracted into three new
helpers. The info about the capture can also be printed from a single
point, which simplifies the exit paths in do_transfer().
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-2-7faea8e6b6ae@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test that validates that an unbound packet socket cannot create/join
a fanout group.
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/7612fa90f613100e2b64c563cab3d7fdf36010db.1728802323.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify test_control_group to have toggle parameter.
When toggle is non-zero, loopback device will be set down for the
initialization of fd[1] which is still expected to successfully join
the fanout.
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/6f4a506ed5f08f8fc00a966dec8febd1030c6e98.1728802323.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-10-14
The following pull-request contains BPF updates for your *net-next* tree.
We've added 21 non-merge commits during the last 18 day(s) which contain
a total of 21 files changed, 1185 insertions(+), 127 deletions(-).
The main changes are:
1) Put xsk sockets on a struct diet and add various cleanups. Overall, this helps
to bump performance by 12% for some workloads, from Maciej Fijalkowski.
2) Extend BPF selftests to increase coverage of XDP features in combination
with BPF cpumap, from Alexis Lothoré (eBPF Foundation).
3) Extend netkit with an option to delegate skb->{mark,priority} scrubbing to
its BPF program, from Daniel Borkmann.
4) Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs,
from Mahe Tardy.
5) Extend BPF selftests covering a BPF program setting socket options per MPTCP
subflow, from Geliang Tang and Nicolas Rybowski.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (21 commits)
xsk: Use xsk_buff_pool directly for cq functions
xsk: Wrap duplicated code to function
xsk: Carry a copy of xdp_zc_max_segs within xsk_buff_pool
xsk: Get rid of xdp_buff_xsk::orig_addr
xsk: s/free_list_node/list_node/
xsk: Get rid of xdp_buff_xsk::xskb_list_node
selftests/bpf: check program redirect in xdp_cpumap_attach
selftests/bpf: make xdp_cpumap_attach keep redirect prog attached
selftests/bpf: fix bpf_map_redirect call for cpu map test
selftests/bpf: add tcx netns cookie tests
bpf: add get_netns_cookie helper to tc programs
selftests/bpf: add missing header include for htons
selftests/bpf: Extend netkit tests to validate skb meta data
tools: Sync if_link.h uapi tooling header
netkit: Add add netkit scrub support to rt_link.yaml
netkit: Simplify netkit mode over to use NLA_POLICY_MAX
netkit: Add option for scrubbing skb meta data
bpf: Remove unused macro
selftests/bpf: Add mptcp subflow subtest
selftests/bpf: Add getsockopt to inspect mptcp subflow
...
====================
Link: https://patch.msgid.link/20241014211110.16562-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
YNL specs can use string expressions for limits, like s32-min
or u16-max. We convert all of those into their numeric values
when generating the code, which isn't always helpful. Try to
retain the string representations in the output. Any sort of
calculations still need the integers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241010151248.2049755-1-kuba@kernel.org
[pabeni@redhat.com: regenerated netdev-genl-gen.c]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
