Age | Commit message (Collapse) | Author |
|
Add the single subflow test case for MP_FAIL, to test the infinite
mapping case. Use the test_linkfail value to make 128KB test files.
Add a new function reset_with_fail(), in it use 'iptables' and 'tc
action pedit' rules to produce the bit flips to trigger the checksum
failures. Set validate_checksum to enable checksums for the MP_FAIL
tests without passing the '-C' argument. Set check_invert flag to
enable the invert bytes check for the output data in check_transfer().
Instead of the file mismatch error, this test prints out the inverted
bytes.
Add a new function pedit_action_pkts() to get the numbers of the packets
edited by the tc pedit actions. Print this numbers to the output.
Also add the needed kernel configures in the selftests config file.
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add tests validating that libbpf is indeed patching up BPF verifier log
with CO-RE relocation details. Also test partial and full truncation
scenarios.
This test might be a bit fragile due to changing BPF verifier log
format. If that proves to be frequently breaking, we can simplify tests
or remove the truncation subtests. But for now it seems useful to test
it in those conditions that are otherwise rarely occuring in practice.
Also test CO-RE relo failure in a subprog as that excercises subprogram CO-RE
relocation mapping logic which doesn't work out of the box without extra
relo storage previously done only for gen_loader case.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-11-andrii@kernel.org
|
|
Teach libbpf to post-process BPF verifier log on BPF program load
failure and detect known error patterns to provide user with more
context.
Currently there is one such common situation: an "unguarded" failed BPF
CO-RE relocation. While failing CO-RE relocation is expected, it is
expected to be property guarded in BPF code such that BPF verifier
always eliminates BPF instructions corresponding to such failed CO-RE
relos as dead code. In cases when user failed to take such precautions,
BPF verifier provides the best log it can:
123: (85) call unknown#195896080
invalid func unknown#195896080
Such incomprehensible log error is due to libbpf "poisoning" BPF
instruction that corresponds to failed CO-RE relocation by replacing it
with invalid `call 0xbad2310` instruction (195896080 == 0xbad2310 reads
"bad relo" if you squint hard enough).
Luckily, libbpf has all the necessary information to look up CO-RE
relocation that failed and provide more human-readable description of
what's going on:
5: <invalid CO-RE relocation>
failed to resolve CO-RE relocation <byte_off> [6] struct task_struct___bad.fake_field_subprog (0:2 @ offset 8)
This hopefully makes it much easier to understand what's wrong with
user's BPF program without googling magic constants.
This BPF verifier log fixup is setup to be extensible and is going to be
used for at least one other upcoming feature of libbpf in follow up patches.
Libbpf is parsing lines of BPF verifier log starting from the very end.
Currently it processes up to 10 lines of code looking for familiar
patterns. This avoids wasting lots of CPU processing huge verifier logs
(especially for log_level=2 verbosity level). Actual verification error
should normally be found in last few lines, so this should work
reliably.
If libbpf needs to expand log beyond available log_buf_size, it
truncates the end of the verifier log. Given verifier log normally ends
with something like:
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
... truncating this on program load error isn't too bad (end user can
always increase log size, if it needs to get complete log).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-10-andrii@kernel.org
|
|
Simplify bpf_core_parse_spec() signature to take struct bpf_core_relo as
an input instead of requiring callers to decompose them into type_id,
relo, spec_str, etc. This makes using and reusing this helper easier.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-9-andrii@kernel.org
|
|
Refactor how CO-RE relocation is formatted. Now it dumps human-readable
representation, currently used by libbpf in either debug or error
message output during CO-RE relocation resolution process, into provided
buffer. This approach allows for better reuse of this functionality
outside of CO-RE relocation resolution, which we'll use in next patch
for providing better error message for BPF verifier rejecting BPF
program due to unguarded failed CO-RE relocation.
It also gets rid of annoying "stitching" of libbpf_print() calls, which
was the only place where we did this.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-8-andrii@kernel.org
|
|
Previously, libbpf recorded CO-RE relocations with insns_idx resolved
according to finalized subprog locations (which are appended at the end
of entry BPF program) to simplify the job of light skeleton generator.
This is necessary because once subprogs' instructions are appended to
main entry BPF program all the subprog instruction indices are shifted
and that shift is different for each entry (main) BPF program, so it's
generally impossible to map final absolute insn_idx of the finalized BPF
program to their original locations inside subprograms.
This information is now going to be used not only during light skeleton
generation, but also to map absolute instruction index to subprog's
instruction and its corresponding CO-RE relocation. So start recording
these relocations always, not just when obj->gen_loader is set.
This information is going to be freed at the end of bpf_object__load()
step, as before (but this can change in the future if there will be
a need for this information post load step).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-7-andrii@kernel.org
|
|
Enhance linked_funcs selftest with two tricky features that might not
obviously work correctly together. We add CO-RE relocations to entry BPF
programs and mark those programs as non-autoloadable with SEC("?...")
annotation. This makes sure that libbpf itself handles .BTF.ext CO-RE
relocation data matching correctly for SEC("?...") programs, as well as
ensures that BPF static linker handles this correctly (this was the case
before, no changes are necessary, but it wasn't explicitly tested).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-6-andrii@kernel.org
|
|
Instead of using ELF section names as a joining key between .BTF.ext and
corresponding BPF programs, pre-build .BTF.ext section number to ELF
section index mapping during bpf_object__open() and use it later for
matching .BTF.ext information (func/line info or CO-RE relocations) to
their respective BPF programs and subprograms.
This simplifies corresponding joining logic and let's libbpf do
manipulations with BPF program's ELF sections like dropping leading '?'
character for non-autoloaded programs. Original joining logic in
bpf_object__relocate_core() (see relevant comment that's now removed)
was never elegant, so it's a good improvement regardless. But it also
avoids unnecessary internal assumptions about preserving original ELF
section name as BPF program's section name (which was broken when
SEC("?abc") support was added).
Fixes: a3820c481112 ("libbpf: Support opting out from autoloading BPF programs declaratively")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-5-andrii@kernel.org
|
|
Fix the bug in bpf_object__relocate_core() which can lead to finding
invalid matching BPF program when processing CO-RE relocation. IF
matching program is not found, last encountered program will be assumed
to be correct program and thus error detection won't detect the problem.
Fixes: 9c82a63cf370 ("libbpf: Fix CO-RE relocs against .text section")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-4-andrii@kernel.org
|
|
libbpf pretends it knows actual limit of BPF program instructions based
on UAPI headers it compiled with. There is neither any guarantee that
UAPI headers match host kernel, nor BPF verifier actually uses
BPF_MAXINSNS constant anymore. Just drop unhelpful "guess", BPF verifier
will emit actual reason for failure in its logs anyways.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-3-andrii@kernel.org
|
|
Use type name for checking whether CO-RE relocation is referring to
anonymous type. Using spec string makes no sense.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-2-andrii@kernel.org
|
|
Ensure that the edge case where first member type was matched
successfully even if it didn't match BTF type of register is caught and
rejected by the verifier.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-14-memxor@gmail.com
|
|
Reuse bpf_prog_test functions to test the support for PTR_TO_BTF_ID in
BPF map case, including some tests that verify implementation sanity and
corner cases.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-13-memxor@gmail.com
|
|
This uses the __kptr and __kptr_ref macros as well, and tries to test
the stuff that is supposed to work, since we have negative tests in
test_verifier suite. Also include some code to test map-in-map support,
such that the inner_map_meta matches the kptr_off_tab of map added as
element.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-12-memxor@gmail.com
|
|
Include convenience definitions:
__kptr: Unreferenced kptr
__kptr_ref: Referenced kptr
Users can use them to tag the pointer type meant to be used with the new
support directly in the map value definition.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-11-memxor@gmail.com
|
|
Extending the code in previous commits, introduce referenced kptr
support, which needs to be tagged using 'kptr_ref' tag instead. Unlike
unreferenced kptr, referenced kptr have a lot more restrictions. In
addition to the type matching, only a newly introduced bpf_kptr_xchg
helper is allowed to modify the map value at that offset. This transfers
the referenced pointer being stored into the map, releasing the
references state for the program, and returning the old value and
creating new reference state for the returned pointer.
Similar to unreferenced pointer case, return value for this case will
also be PTR_TO_BTF_ID_OR_NULL. The reference for the returned pointer
must either be eventually released by calling the corresponding release
function, otherwise it must be transferred into another map.
It is also allowed to call bpf_kptr_xchg with a NULL pointer, to clear
the value, and obtain the old value if any.
BPF_LDX, BPF_STX, and BPF_ST cannot access referenced kptr. A future
commit will permit using BPF_LDX for such pointers, but attempt at
making it safe, since the lifetime of object won't be guaranteed.
There are valid reasons to enforce the restriction of permitting only
bpf_kptr_xchg to operate on referenced kptr. The pointer value must be
consistent in face of concurrent modification, and any prior values
contained in the map must also be released before a new one is moved
into the map. To ensure proper transfer of this ownership, bpf_kptr_xchg
returns the old value, which the verifier would require the user to
either free or move into another map, and releases the reference held
for the pointer being moved in.
In the future, direct BPF_XCHG instruction may also be permitted to work
like bpf_kptr_xchg helper.
Note that process_kptr_func doesn't have to call
check_helper_mem_access, since we already disallow rdonly/wronly flags
for map, which is what check_map_access_type checks, and we already
ensure the PTR_TO_MAP_VALUE refers to kptr by obtaining its off_desc,
so check_map_access is also not required.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-4-memxor@gmail.com
|
|
Add a new type flag for bpf_arg_type that when set tells verifier that
for a release function, that argument's register will be the one for
which meta.ref_obj_id will be set, and which will then be released
using release_reference. To capture the regno, introduce a new field
release_regno in bpf_call_arg_meta.
This would be required in the next patch, where we may either pass NULL
or a refcounted pointer as an argument to the release function
bpf_kptr_xchg. Just releasing only when meta.ref_obj_id is set is not
enough, as there is a case where the type of argument needed matches,
but the ref_obj_id is set to 0. Hence, we must enforce that whenever
meta.ref_obj_id is zero, the register that is to be released can only
be NULL for a release function.
Since we now indicate whether an argument is to be released in
bpf_func_proto itself, is_release_function helper has lost its utitlity,
hence refactor code to work without it, and just rely on
meta.release_regno to know when to release state for a ref_obj_id.
Still, the restriction of one release argument and only one ref_obj_id
passed to BPF helper or kfunc remains. This may be lifted in the future.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-3-memxor@gmail.com
|
|
musl does not like including sys/fcntl.h directly:
[...]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
[...]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220424051022.2619648-5-asmadeus@codewreck.org
|
|
musl nftw implementation does not support FTW_ACTIONRETVAL. There have been
multiple attempts at pushing the feature in musl upstream, but it has been
refused or ignored all the times:
https://www.openwall.com/lists/musl/2021/03/26/1
https://www.openwall.com/lists/musl/2022/01/22/1
In this case we only care about /proc/<pid>/fd/<fd>, so it's not too difficult
to reimplement directly instead, and the new implementation makes 'bpftool perf'
slightly faster because it doesn't needlessly stat/readdir unneeded directories
(54ms -> 13ms on my machine).
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220424051022.2619648-4-asmadeus@codewreck.org
|
|
The link variable is already of type 'struct bpf_link *', casting it to
'struct bpf_link *' is redundant, drop it.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220424143420.457082-1-ytcoode@gmail.com
|
|
Once line card is activated, check the device FW version is exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Once line card is provisioned, check if HW revision and INI version
are exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Once line card is provisioned, check the count of devices on it and
print them out.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds an initial subset of forwarding selftests which I considered
to be relevant for DSA drivers, along with a forwarding.config that
makes it easier to run them (disables veth pair creation, makes sure MAC
addresses are unique and stable).
The intention is to request driver writers to run these selftests during
review and make sure that the tests pass, or at least that the problems
are known.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This tests the capability of switch ports to filter out undesired
traffic. Different drivers are expected to have different capabilities
here (so some may fail and some may pass), yet the test still has some
value, for example to check for regressions.
There are 2 kinds of failures, one is when a packet which should have
been accepted isn't (and that should be fixed), and the other "failure"
(as reported by the test) is when a packet could have been filtered out
(for being unnecessary) yet it was received.
The bridge driver fares particularly badly at this test:
TEST: br0: Unicast IPv4 to primary MAC address [ OK ]
TEST: br0: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address [FAIL]
reception succeeded, but should have failed
TEST: br0: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to joined group [ OK ]
TEST: br0: Multicast IPv4 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: br0: Multicast IPv6 to joined group [ OK ]
TEST: br0: Multicast IPv6 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv6 to unknown group, allmulti [ OK ]
mainly because it does not implement IFF_UNICAST_FLT. Yet I still think
having the test (with the failures) is useful in case somebody wants to
tackle that problem in the future, to make an easy before-and-after
comparison.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bombard a standalone switch port with various kinds of traffic to ensure
it is really standalone and doesn't leak packets to other switch ports.
Also check for switch ports in different bridges, and switch ports in a
VLAN-aware bridge but having different pvids. No forwarding should take
place in either case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
interface
Pinging an IPv6 link-local multicast address selects the link-local
unicast address of the interface as source, and we'd like to monitor for
that in tcpdump.
Add a helper to the forwarding library which retrieves the link-local
IPv6 address of an interface, to make that task easier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the forwarding library with calls to some small C programs which
join an IP multicast group and send some packets to it. Both IPv4 and
IPv6 groups are supported. Use cases range from testing IGMP/MLD
snooping, to RX filtering, to multicast routing.
Testing multicast traffic using msend/mreceive is intended to be done
using tcpdump.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend tcpdump_start() & C:o to handle multiple instances. Useful when
observing bridge operation, e.g., unicast learning/flooding, and any
case of multicast distribution (to these ports but not that one ...).
This means the interface argument is now a mandatory argument to all
tcpdump_*() functions, hence the changes to the ocelot flower test.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For some use-cases we may want to change the tcpdump flags used in
tcpdump_start(). For instance, observing interfaces without the PROMISC
flag, e.g. to see what's really being forwarded to the bridge interface.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default, DSA switch ports inherit their MAC address from the DSA
master.
This works well for practical situations, but some selftests like
bridge_vlan_unaware.sh loop back 2 standalone DSA ports with 2 bridged
DSA ports, and require the bridge to forward packets between the
standalone ports.
Due to the bridge seeing that the MAC DA it needs to forward is present
as a local FDB entry (it coincides with the MAC address of the bridge
ports), the test packets are not forwarded, but terminated locally on
br0. In turn, this makes the ping and ping6 tests fail.
Address this by introducing an option to have stable MAC addresses.
When mac_addr_prepare is called, the current addresses of the netifs are
saved and replaced with 00:01:02:03:04:${netif number}. Then when
mac_addr_restore is called at the end of the test, the original MAC
addresses are restored. This ensures that the MAC addresses are unique,
which makes the test pass even for DSA ports.
The usage model is for the behavior to be opt-in via STABLE_MAC_ADDRS,
which DSA should set to true, all others behave as before. By hooking
the calls to mac_addr_prepare and mac_addr_restore within the forwarding
lib itself, we do not need to patch each individual selftest, the only
requirement is that pre_cleanup is called.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a function chk_infi_nr() to check the mibs for the
infinite mapping. Invoke it in chk_join_nr() when validate_checksum
is set.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use bpf_link_create() API in fexit_stress test to attach FEXIT programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kui-Feng Lee <kuifeng@fb.com>
Link: https://lore.kernel.org/bpf/20220421033945.3602803-4-andrii@kernel.org
|
|
Teach bpf_link_create() to fallback to bpf_raw_tracepoint_open() on
older kernels for programs that are attachable through
BPF_RAW_TRACEPOINT_OPEN. This makes bpf_link_create() more unified and
convenient interface for creating bpf_link-based attachments.
With this approach end users can just use bpf_link_create() for
tp_btf/fentry/fexit/fmod_ret/lsm program attachments without needing to
care about kernel support, as libbpf will handle this transparently. On
the other hand, as newer features (like BPF cookie) are added to
LINK_CREATE interface, they will be readily usable though the same
bpf_link_create() API without any major refactoring from user's
standpoint.
bpf_program__attach_btf_id() is now using bpf_link_create() internally
as well and will take advantaged of this unified interface when BPF
cookie is added for fentry/fexit.
Doing proactive feature detection of LINK_CREATE support for
fentry/tp_btf/etc is quite involved. It requires parsing vmlinux BTF,
determining some stable and guaranteed to be in all kernels versions
target BTF type (either raw tracepoint or fentry target function),
actually attaching this program and thus potentially affecting the
performance of the host kernel briefly, etc. So instead we are taking
much simpler "lazy" approach of falling back to
bpf_raw_tracepoint_open() call only if initial LINK_CREATE command
fails. For modern kernels this will mean zero added overhead, while
older kernels will incur minimal overhead with a single fast-failing
LINK_CREATE call.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kui-Feng Lee <kuifeng@fb.com>
Link: https://lore.kernel.org/bpf/20220421033945.3602803-3-andrii@kernel.org
|
|
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
d08ed852560e ("net: lan966x: Make sure to release ptp interrupt")
c8349639324a ("net: lan966x: Add FDMA functionality")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from xfrm and can.
Current release - regressions:
- rxrpc: restore removed timer deletion
Current release - new code bugs:
- gre: fix device lookup for l3mdev use-case
- xfrm: fix egress device lookup for l3mdev use-case
Previous releases - regressions:
- sched: cls_u32: fix netns refcount changes in u32_change()
- smc: fix sock leak when release after smc_shutdown()
- xfrm: limit skb_page_frag_refill use to a single page
- eth: atlantic: invert deep par in pm functions, preventing null
derefs
- eth: stmmac: use readl_poll_timeout_atomic() in atomic state
Previous releases - always broken:
- gre: fix skb_under_panic on xmit
- openvswitch: fix OOB access in reserve_sfa_size()
- dsa: hellcreek: calculate checksums in tagger
- eth: ice: fix crash in switchdev mode
- eth: igc:
- fix infinite loop in release_swfw_sync
- fix scheduling while atomic"
* tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
drivers: net: hippi: Fix deadlock in rr_close()
selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets
selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
nfc: MAINTAINERS: add Bug entry
net: stmmac: Use readl_poll_timeout_atomic() in atomic state
doc/ip-sysctl: add bc_forwarding
netlink: reset network and mac headers in netlink_dump()
net: mscc: ocelot: fix broken IP multicast flooding
net: dsa: hellcreek: Calculate checksums in tagger
net: atlantic: invert deep par in pm functions, preventing null derefs
can: isotp: stop timeout monitoring when no first frame was sent
bonding: do not discard lowest hash bit for non layer3+4 hashing
net: lan966x: Make sure to release ptp interrupt
ipv6: make ip6_rt_gc_expire an atomic_t
net: Handle l3mdev in ip_tunnel_init_flow
l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu
net/sched: cls_u32: fix possible leak in u32_init_knode()
net/sched: cls_u32: fix netns refcount changes in u32_change()
powerpc: Update MAINTAINERS for ibmvnic and VAS
net: restore alpha order to Ethernet devices in config
...
|
|
Obj_elf is already non-null checked at the function entry, so remove
redundant non-null checks on obj_elf.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220421031803.2283974-1-cuigaosheng1@huawei.com
|
|
Switching to libbpf 1.0 API broke test_lpm_map and test_lru_map as error
reporting changed. Instead of setting errno and returning -1 bpf calls
now return -Exxx directly.
Drop errno checks and look at return code directly.
Fixes: b858ba8c52b6 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20220421094320.1563570-1-asavkov@redhat.com
|
|
I am getting the following compilation error for prog_tests/uprobe_autoattach.c:
tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c: In function ‘test_uprobe_autoattach’:
./test_progs.h:209:26: error: pointer ‘mem’ may be used after ‘free’ [-Werror=use-after-free]
The value of mem is now used in one of the asserts, which is why it may be
confusing compilers. However, it is not dereferenced. Silence this by moving
free(mem) after the assert block.
Fixes: 1717e248014c ("selftests/bpf: Uprobe tests should verify param/return values")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220421132317.1583867-1-asavkov@redhat.com
|
|
Switching to libbpf 1.0 API broke test_sock and test_sysctl as they
check for return of bpf_prog_attach to be exactly -1. Switch the check
to '< 0' instead.
Fixes: b858ba8c52b6 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20220421130104.1582053-1-asavkov@redhat.com
|
|
This adds documentation for the following API functions:
- bpf_program__set_expected_attach_type()
- bpf_program__set_type()
- bpf_program__set_attach_target()
- bpf_program__attach()
- bpf_program__pin()
- bpf_program__unpin()
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220420161226.86803-3-grantseltzer@gmail.com
|
|
This updates usage of the following API functions within
libbpf so their newly added error return is checked:
- bpf_program__set_expected_attach_type()
- bpf_program__set_type()
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220420161226.86803-2-grantseltzer@gmail.com
|
|
This adds an error return to the following API functions:
- bpf_program__set_expected_attach_type()
- bpf_program__set_type()
In both cases, the error occurs when the BPF object has
already been loaded when the function is called. In this
case -EBUSY is returned.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220420161226.86803-1-grantseltzer@gmail.com
|
|
Use bpf_prog_test_run_opts to test the skb_load_bytes function. Tests
the behavior when offset is greater than INT_MAX or a normal value.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220416105801.88708-4-liujian56@huawei.com
|
|
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: d01724dd2a66 ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add riscv-specific USDT argument specification parsing logic.
riscv USDT argument format is shown below:
- Memory dereference case:
"size@off(reg)", e.g. "-8@-88(s0)"
- Constant value case:
"size@val", e.g. "4@5"
- Register read case:
"size@reg", e.g. "-8@a1"
s8 will be marked as poison while it's a reg of riscv, we need
to alias it in advance. Both RV32 and RV64 have been tested.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220419145238.482134-3-pulehui@huawei.com
|
|
The usdt_cookie is defined as __u64, which should not be
used as a long type because it will be cast to 32 bits
in 32-bit platforms.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220419145238.482134-2-pulehui@huawei.com
|
|
Add a few test cases that ensure we catch cases of badly ordered type
tags in modifier chains.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220419164608.1990559-3-memxor@gmail.com
|
|
Take advantage of new libbpf feature for declarative non-autoloaded BPF
program SEC() definitions in few test that test single program at a time
out of many available programs within the single BPF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419002452.632125-2-andrii@kernel.org
|