| Age | Commit message (Collapse) | Author |
|---|
|
The API gives access to inner map for map in map types (array or
hash of map). It will be used to dynamically set max_entries in it.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-7-yauheni.kaliuta@redhat.com
|
|
Replace hardcoded 4096 with runtime value in the userspace part of
the test and set bpf table sizes dynamically according to the value.
Do not switch to ASSERT macros, keep CHECK, for consistency with the
rest of the test. Can be a separate cleanup patch.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-6-yauheni.kaliuta@redhat.com
|
|
Replace hardcoded 4096 with runtime value in the userspace part of
the test and set bpf table sizes dynamically according to the value.
Do not switch to ASSERT macros, keep CHECK, for consistency with the
rest of the test. Can be a separate cleanup patch.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-5-yauheni.kaliuta@redhat.com
|
|
Use ASSERT to check result but keep CHECK where format was used to
report error.
Use bpf_map__set_max_entries() to set map size dynamically from
userspace according to page size.
Zero-initialize the variable in bpf prog, otherwise it will cause
problems on some versions of Clang.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-4-yauheni.kaliuta@redhat.com
|
|
Since there is no convenient way for bpf program to get PAGE_SIZE
from inside of the kernel, pass the value from userspace.
Zero-initialize the variable in bpf prog, otherwise it will cause
problems on some versions of Clang.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-3-yauheni.kaliuta@redhat.com
|
|
Switch the test to use BPF skeleton to save some boilerplate and
make it easy to access bpf program bss segment.
The latter will be used to pass PAGE_SIZE from userspace since there
is no convenient way for bpf program to get it from inside of the
kernel.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-2-yauheni.kaliuta@redhat.com
|
|
As pointed by Andrii Nakryiko, _version is useless now, remove it.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-1-yauheni.kaliuta@redhat.com
|
|
Wait until after the UMEM is checked for null to dereference it.
Fixes: 43f1bc1efff1 ("libbpf: Restore umem state after socket create failure")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210408052009.7844-1-ciara.loftus@intel.com
|
|
Verify cleanup of failed actions batch change where second action in batch
fails after successful init of first action.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Verify cleanup of failed actions batch add where second action in batch
fails after successful init of first action.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes a spelling typo in kernel-chktaint
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210402070514.336376-1-standby24x7@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add PMU events for AMD Zen3 processors as documented in the AMD Processor
Programming Reference for Family 19h and Model 01h [1].
Below are the events which are new on Zen3:
PMCx041 ls_mab_alloc.{all_allocations|hardware_prefetcher_allocations|load_store_allocations}
PMCx043 ls_dmnd_fills_from_sys.ext_cache_local
PMCx044 ls_any_fills_from_sys.{mem_io_remote|ext_cache_remote|mem_io_local|ext_cache_local|int_cache|lcl_l2}
PMCx047 ls_misal_loads.{ma4k|ma64}
PMCx059 ls_sw_pf_dc_fills.ext_cache_local
PMCx05a ls_hw_pf_dc_fills.ext_cache_local
PMCx05f ls_alloc_mab_count
PMCx085 bp_l1_tlb_miss_l2_tlb_miss.coalesced_4k
PMCx0ab de_dis_cops_from_decoder.disp_op_type.{any_integer_dispatch|any_fp_dispatch}
PMCx0cc ex_ret_ind_brch_instr
PMCx18e ic_tag_hit_miss.{all_instruction_cache_accesses|instruction_cache_miss|instruction_cache_hit}
PMCx1c7 ex_ret_msprd_brnch_instr_dir_msmtch
PMCx28f op_cache_hit_miss.{all_op_cache_accesses|op_cache_miss|op_cache_hit}
Section 2.1.17.2 "Performance Measurement" of "PPR for AMD Family 19h,
Model 01h, Revision B1 Processors - 55898 Rev 0.35 - Feb 5, 2021." lists
new metrics. Add them.
Preserve the events for Zen3 if they are measurable and non-zero as taken
from Zen2 directory even if the PPR of Zen3 [1] omits them. Those events
are the following:
PMCx000 fpu_pipe_assignment.{total|total0|total1|total2|total3}
PMCx004 fp_num_mov_elim_scal_op.{optimized|opt_potential|sse_mov_ops_elim|sse_mov_ops}
PMCx02D ls_rdtsc
PMCx040 ls_dc_accesses
PMCx046 ls_tablewalker.{iside|ic_type1|ic_type0|dside|dc_type1|dc_type0}
PMCx061 l2_request_g2.{group1|ls_rd_sized|ls_rd_sized_nc|ic_rd_sized|ic_rd_sized_nc|smc_inval|bus_lock_originator|bus_locks_responses}
PMCx062 l2_latency.l2_cycles_waiting_on_fills
PMCx063 l2_wcb_req.{wcb_write|wcb_close|zero_byte_store|cl_zero}
PMCx06d l2_fill_pending.l2_fill_busy
PMCx080 ic_fw32
PMCx081 ic_fw32_miss
PMCx086 bp_snp_re_sync
PMCx087 ic_fetch_stall.{ic_stall_any|ic_stall_dq_empty|ic_stall_back_pressure}
PMCx08a bp_l1_btb_correct
PMCx08c ic_cache_inval.{l2_invalidating_probe|fill_invalidated}
PMCx099 bp_tlb_rel
PMCx0a9 de_dis_uop_queue_empty_di0
PMCx0c7 ex_ret_brn_resync
PMCx28a ic_oc_mode_switch.{oc_ic_mode_switch|ic_oc_mode_switch}
L3PMCx01 l3_request_g1.caching_l3_cache_accesses
L3PMCx06 l3_comb_clstr_state.{other_l3_miss_typs|request_miss}
[1] Processor Programming Reference (PPR) for AMD Family 19h, Model 01h,
Revision B1 Processors - 55898 Rev 0.35 - Feb 5, 2021.
[2] Processor Programming Reference (PPR) for AMD Family 17h Model 71h,
Revision B0 Processors, 56176 Rev 3.06 - Jul 17, 2019.
[3] Processor Programming Reference (PPR) for AMD Family 17h Models
01h,08h, Revision B2 Processors, 54945 Rev 3.03 - Jun 14, 2019.
All of the PPRs can be found at:
https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-5-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use 0x%02x format for all event codes and umasks as this helps in tracking
changes of automatically generated event tables.
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-4-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The values of event codes and umasks are inconsistent with letter cases.
Enforce a unique style and default everything to lower case as this
helps in tracking changes of automatically generated event tables.
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-3-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 08ed77e414ab2342 ("perf vendor events amd: Add recommended events")
added the hits event "L2 Cache Hits from L2 HWPF" with the same metric
expression as the accesses event "L2 Cache Accesses from L2 HWPF":
$ perf list --details
...
l2_cache_accesses_from_l2_hwpf
[L2 Cache Accesses from L2 HWPF]
[l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
l2_cache_hits_from_l2_hwpf
[L2 Cache Hits from L2 HWPF]
[l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
...
This was wrong and led to counting hits the same as accesses. Section
2.1.15.2 "Performance Measurement" of "PPR for AMD Family 17h Model 31h
B0 - 55803 Rev 0.54 - Sep 12, 2019", documents the hits event with
EventCode 0x70 which is the same as l2_pf_hit_l2.
Fix this, and massage the description for l2_pf_hit_l2 as the hits event
is now the duplicate of l2_pf_hit_l2. AMD recommends using the recommended
event over other events if the duplicate exists and maintain both for
consistency. Hence, l2_cache_hits_from_l2_hwpf should override
l2_pf_hit_l2.
Before:
# perf stat -M l2_cache_accesses_from_l2_hwpf,l2_cache_hits_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
1,436 l2_pf_miss_l2_l3 # 11114.00 l2_cache_accesses_from_l2_hwpf
# 11114.00 l2_cache_hits_from_l2_hwpf
4,482 l2_pf_hit_l2
5,196 l2_pf_miss_l2_hit_l3
1.001765339 seconds time elapsed
After:
# perf stat -M l2_cache_accesses_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
1,477 l2_pf_miss_l2_l3 # 10442.00 l2_cache_accesses_from_l2_hwpf
3,978 l2_pf_hit_l2
4,987 l2_pf_miss_l2_hit_l3
1.001491186 seconds time elapsed
# perf stat -e l2_cache_hits_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
3,983 l2_cache_hits_from_l2_hwpf
1.001329970 seconds time elapsed
Note the difference in performance counter values for the accesses
versus the hits after the fix, and the hits event now counting the same
as l2_pf_hit_l2.
Fixes: 08ed77e414ab ("perf vendor events amd: Add recommended events")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> # On a 3900X
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-2-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add L3 metrics.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-7-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add L2 metrics.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-6-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add L1 metrics. Formula is as consistent as possible with MAN pages
description for these metrics.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-5-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
the system
Add a function to find the common PMU map for the system.
For arm64, a special variant is added. This is because arm64 supports
heterogeneous CPU systems. As such, it cannot be guaranteed that the
cpumap is same for all CPUs. So in case of heterogeneous systems, don't
return a cpumap.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The pmu-events parsing test does not handle metric reuse at all.
Introduce some simple handling to resolve metrics who reference other
metrics.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/1617791570-165223-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Function find_metric() is required for the metric processing in the
pmu-events testcase, so make it public. Also change the name to include
"metricgroup".
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/1617791570-165223-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For validating the stack offset behavior, report the offset from a given
process's first seen stack address. Add s script to calculate the results
to the LKDTM kselftests.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210401232347.2791257-7-keescook@chromium.org
|
|
The suggested alternative for getting cache-inhibited memory with 'mem='
and /dev/mem is pretty hacky. Also, PAPR guests do not allow system
memory to be mapped cache-inhibited so despite /dev/mem being available
this will not work which can cause confusion. Instead recommend using
the memtrace buffers. memtrace is only available on powernv so there
will not be any chance of trying to do this in a guest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-2-jniethe5@gmail.com
|
|
Previously when mapping kernel memory on radix, no ptesync was
included which would periodically lead to unhandled spurious faults.
Mapping kernel memory is used when code patching with Strict RWX
enabled. As suggested by Chris Riedl, turning ftrace on and off does a
large amount of code patching so is a convenient way to see this kind
of fault.
Add a selftest to try and trigger this kind of a spurious fault. It
tests for 30 seconds which is usually long enough for the issue to
show up.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Rename it to better reflect what it does, rather than the symptom]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-2-jniethe5@gmail.com
|
|
Change a few printed messages to report test progress more clearly.
Add a missing "\n" at the end of one printed message.
Suggested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This patch added a new testcase for setting the net device name. In it,
pass the net device name to pm_nl_ctl to set the ifindex field of struct
mptcp_pm_addr_entry.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SPE extended headers are > 1 byte so ensure the buffer contains at least
this before reading. This issue was detected by fuzzing.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210407153955.317215-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When '--total-cycles' is specified, it supports sorting for all blocks
by 'Sampled Cycles%'. This is useful to concentrate on the globally
hottest blocks.
'Sampled Cycles%' - block sampled cycles aggregation / total sampled cycles
But in current code, it doesn't use the cycles aggregation. Part of
'cycles' counting is possibly dropped for some overlap jumps. But for
identifying the hot block, we always need the full cycles.
# perf record -b ./triad_loop
# perf report --total-cycles --stdio
Before:
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
# ............... .............. ........... .......... ............................................................. .................
#
0.81% 793 4.32% 793 [setup-vdso.h:34 -> setup-vdso.h:40] ld-2.27.so
0.49% 480 0.87% 160 [native_write_msr+0 -> native_write_msr+16] [kernel.kallsyms]
0.48% 476 0.52% 95 [native_read_msr+0 -> native_read_msr+29] [kernel.kallsyms]
0.31% 303 1.65% 303 [nmi_restore+0 -> nmi_restore+37] [kernel.kallsyms]
0.26% 255 1.39% 255 [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162] [kernel.kallsyms]
0.24% 234 1.28% 234 [end_repeat_nmi+67 -> end_repeat_nmi+83] [kernel.kallsyms]
0.23% 227 1.24% 227 [__irqentry_text_end+96 -> __irqentry_text_end+126] [kernel.kallsyms]
0.20% 194 1.06% 194 [native_set_debugreg+52 -> native_set_debugreg+56] [kernel.kallsyms]
0.11% 106 0.14% 26 [native_sched_clock+0 -> native_sched_clock+98] [kernel.kallsyms]
0.10% 97 0.53% 97 [trigger_load_balance+0 -> trigger_load_balance+67] [kernel.kallsyms]
0.09% 85 0.46% 85 [get-dynamic-info.h:102 -> get-dynamic-info.h:111] ld-2.27.so
...
0.00% 92.7K 0.02% 4 [triad_loop.c:64 -> triad_loop.c:65] triad_loop
The hottest block '[triad_loop.c:64 -> triad_loop.c:65]' is not at
the top of output.
After:
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
# ............... .............. ........... .......... .............................................................. .................
#
94.35% 92.7K 0.02% 4 [triad_loop.c:64 -> triad_loop.c:65] triad_loop
0.81% 793 4.32% 793 [setup-vdso.h:34 -> setup-vdso.h:40] ld-2.27.so
0.49% 480 0.87% 160 [native_write_msr+0 -> native_write_msr+16] [kernel.kallsyms]
0.48% 476 0.52% 95 [native_read_msr+0 -> native_read_msr+29] [kernel.kallsyms]
0.31% 303 1.65% 303 [nmi_restore+0 -> nmi_restore+37] [kernel.kallsyms]
0.26% 255 1.39% 255 [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162] [kernel.kallsyms]
0.24% 234 1.28% 234 [end_repeat_nmi+67 -> end_repeat_nmi+83] [kernel.kallsyms]
0.23% 227 1.24% 227 [__irqentry_text_end+96 -> __irqentry_text_end+126] [kernel.kallsyms]
0.20% 194 1.06% 194 [native_set_debugreg+52 -> native_set_debugreg+56] [kernel.kallsyms]
0.11% 106 0.14% 26 [native_sched_clock+0 -> native_sched_clock+98] [kernel.kallsyms]
0.10% 97 0.53% 97 [trigger_load_balance+0 -> trigger_load_balance+67] [kernel.kallsyms]
0.09% 85 0.46% 85 [get-dynamic-info.h:102 -> get-dynamic-info.h:111] ld-2.27.so
0.08% 82 0.06% 11 [intel_pmu_drain_pebs_nhm+580 -> intel_pmu_drain_pebs_nhm+627] [kernel.kallsyms]
0.08% 77 0.42% 77 [lru_add_drain_cpu+0 -> lru_add_drain_cpu+133] [kernel.kallsyms]
0.08% 74 0.10% 18 [handle_pmi_common+271 -> handle_pmi_common+310] [kernel.kallsyms]
0.08% 74 0.40% 74 [get-dynamic-info.h:131 -> get-dynamic-info.h:157] ld-2.27.so
0.07% 69 0.09% 17 [intel_pmu_drain_pebs_nhm+432 -> intel_pmu_drain_pebs_nhm+468] [kernel.kallsyms]
Now the hottest block is reported at the top of output.
Fixes: b65a7d372b1a55db ("perf hist: Support block formats with compare/sort/display")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210407024452.29988-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This release adds following changes:
- Support increased number of CPUs
- Return error when mailbox commmand fails to enable core-power
- Option to online all CPUs
- Removes build date and time print
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
These macros introduce nondeterminism in builds, and break reproducible
builds.
Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It is possible that users manually offlined CPUs via sysfs interface
and then started this utility. In this case we will not be able to get
package and die id of the those CPUs. So add an option to force online
if required for some commands.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some older kernels don't support reading core-power status. In that case
mailbox command fails. So, display core-power status as "unknown" instead
of supported.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The current string size to print cpulist can accommodate upto 80
logical CPUs per package. But this limit is not enough. So increase
the string size. Also prevent buffer overflow, if the string size
reaches limit.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This commit squashes the following:
ACPICA commit bc8939e2d902653e71bb1601b129a993c37fcfad
ACPICA commit 2d9e5e98e23f2a569e5691e6bed183146e25798d
ACPICA commit 937358156631ea7a0eef3569c213c82a031097d5
Fix more spelling issues found using the codespell checker and found
without tools.
Link: https://github.com/acpica/acpica/commit/bc8939e2
Link: https://github.com/acpica/acpica/commit/2d9e5e98
Link: https://github.com/acpica/acpica/commit/93735815
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Bring some improvements/rationalization over the first version
of the vgic_init selftests:
- ucall_init is moved in run_cpu()
- vcpu_args_set is not called as not needed
- whenever a helper is supposed to succeed, call the non "_" version
- helpers do not return -errno, instead errno is checked by the caller
- vm_gic struct is used whenever possible, as well as vm_gic_destroy
- _kvm_create_device takes an addition fd parameter
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210407135937.533141-1-eric.auger@redhat.com
|
|
'struct mem_info' is defined at 22nd line.
The declaration here is unnecessary. Remove it.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kael_w@yeah.net
Link: http://lore.kernel.org/lkml/20210406105104.675879-1-wanjiabing@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The tests exercise the VGIC_V3 device creation including the
associated KVM_DEV_ARM_VGIC_GRP_ADDR group attributes:
- KVM_VGIC_V3_ADDR_TYPE_DIST/REDIST
- KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION
Some other tests dedicate to KVM_DEV_ARM_VGIC_GRP_REDIST_REGS group
and especially the GICR_TYPER read. The goal was to test the case
recently fixed by commit 23bde34771f1
("KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace").
The API under test can be found at
Documentation/virt/kvm/devices/arm-vgic-v3.rst
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210405163941.510258-10-eric.auger@redhat.com
|
|
Changeset b00aedf978aa ("doc: Convert to rcu_dereference.txt to rcu_dereference.rst")
renamed: Documentation/RCU/rcu_dereference.txt
to: Documentation/RCU/rcu_dereference.rst.
Update its cross-reference accordingly.
Fixes: b00aedf978aa ("doc: Convert to rcu_dereference.txt to rcu_dereference.rst")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Expose SGX architectural structures, as KVM will use many of the
architectural constants and structs to virtualize SGX.
Name the new header file as asm/sgx.h, rather than asm/sgx_arch.h, to
have single header to provide SGX facilities to share with other kernel
componments. Also update MAINTAINERS to include asm/sgx.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/6bf47acd91ab4d709e66ad1692c7803e4c9063a0.1616136308.git.kai.huang@intel.com
|
|
Add missing ')' for KERNEL_VERSION macro.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210405040119.802188-1-hengqi.chen@gmail.com
|
|
Since commit 14d3d54052539a1e ("perf session: Try to read pipe data from
file") 'perf inject' has started printing "PERFILE2h" when not processing
pipes.
The commit exposed perf to the possiblity that the input is not a pipe
but the 'repipe' parameter gets used. That causes the printing because
perf inject sets 'repipe' to true always.
The 'repipe' parameter of perf_session__new() is used by 2 functions:
- perf_file_header__read_pipe()
- trace_report()
In both cases, the functions copy data to STDOUT_FILENO when 'repipe' is
true.
Fix by setting 'repipe' to true only if the output is a pipe.
Fixes: e558a5bd8b74aff4 ("perf inject: Work with files")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andrew Vagin <avagin@openvz.org>
Link: http://lore.kernel.org/lkml/20210401103605.9000-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We need the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the USB fixes in here as well and it resolves a merge issue with
xhci-mtk.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The tracing test and the recent kfunc call test require
CONFIG_DYNAMIC_FTRACE. This patch adds it to the config file.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210403002921.3419721-1-kafai@fb.com
|
|
Remove redundant semi-colon in finalize_btf_ext().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210402012634.1965453-1-yangyingliang@huawei.com
|
|
With a relatively recent clang master branch test_map skips a section,
libbpf: elf: skipping unrecognized data section(5) .rodata.str1.1
the cause is some pointless strings from bpf_printks in the BPF program
loaded during testing. After just removing the prints to fix above error
Daniel points out the program is a bit pointless and could be simply the
empty program returning SK_PASS.
Here we do just that and return simply SK_PASS. This program is used with
test_maps selftests to test insert/remove of a program into the sockmap
and sockhash maps. Its not testing actual functionality of the TCP
sockmap programs, these are tested from test_sockmap. So we shouldn't
lose in test coverage and fix above warnings. This original test was
added before test_sockmap existed and has been copied around ever since,
clean it up now.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/161731595664.74613.1603087410166945302.stgit@john-XPS-13-9370
|
|
Very occasionally, MPTCP selftests fail. Yeah, I saw that at least once!
Here we provide more details in case of errors with mptcp_join.sh script
like it was done with mptcp_connect.sh, see
commit 767389c8dd55 ("selftests: mptcp: dump more info on errors")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Not to be impacted by packets sent between sub-tests.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'mptcp_connect' already has a timeout for poll() but in some cases, it
is not enough.
With "timeout" tool, we will force the command to fail if it doesn't
finish on time. Thanks to that, the script will continue and display
details about the current state before marking the test as failed.
Displaying this state is very important to be able to understand the
issue. Best to have our CI reporting the issue than just "the test
hanged".
Note that in mptcp_connect.sh, we were using a long timeout to validate
the fact we cannot create a socket if a sysctl is set. We don't need
this timeout.
In diag.sh, we want to send signals to mptcp_connect instances that have
been started in the netns. But we cannot send this signal to 'timeout'
otherwise that will stop the timeout and messages telling us SIGUSR1 has
been received will be printed. Instead of trying to find the right PID
and storing them in an array, we can simply use the output of
'ip netns pids' which is all the PIDs we want to send signal to.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/160
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
