| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485952447-7013-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf probe makes use of debug symbols, so add --symfs as the other
commands have.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel@pengutronix.de
Link: http://lkml.kernel.org/r/1469094512-13440-2-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
After commit 5baecbcd9c9a ("perf symbols: we can now read separate
debug-info files based on a build ID") and when --symfs option is used
perf failed to pick up symbols for file with the same name between host
and sysroot specified by --symfs option. One can see message like this:
bin/bash with build id 26f0062cb6950d4d1ab0fd9c43eae8b10ca42062 not found, continuing without symbols
It happens because code added by 5baecbcd9c9a opens files directly by
dso->long_name without symbol_conf.symfs consideration, which as result
picks one from the host. It reads its build ID and later even code finds
another proper file in directory pointed by --symfs perf ignores it
because build id mismatches.
Fix is to use __symbol__join_symfs to adjust file name according to
--symfs setting. If no --symfs passed the operation would noop and picks
the same host file as before.
Also note in latter tree after 5baecbcd9c9a commit additional check for
'!dso->has_build_id' was added, so to observe error condition 'perf
record' should run with --no-buildid, so perf.data itself would not have
build id for target binary in buildid perf section and 'perf report'
will pass '!dso->has_build_id' condition. Or target binary should not
have build id, but the same binary on host has build id, again
'!dso->has_build_id' will pass in this case and incorrect build id could
be read if --symfs is used.
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: xe-linux-external@cisco.com
Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID")
Link: http://lkml.kernel.org/r/1486424908-17094-1-git-send-email-kamensky@cisco.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
All events from 'perf list', except SDT events, can be directly recorded
with 'perf record'. But, the flow is little different for SDT events.
Probe points for SDT event needs to be created using 'perf probe' before
recording it using 'perf record'.
Perf shows misleading hint when a user tries to record SDT event without
first creating a probe point. Show proper hint there.
Before patch:
$ perf record -a -e sdt_glib:idle__add
event syntax error: 'sdt_glib:idle__add'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sdt_glib/idle__add not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
...
After patch:
$ perf record -a -e sdt_glib:idle__add
event syntax error: 'sdt_glib:idle__add'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sdt_glib/idle__add not found.
Hint: SDT event cannot be directly recorded on.
Please first use 'perf probe sdt_glib:idle__add' before recording it.
...
$ perf probe sdt_glib:idle__add
Added new event:
sdt_glib:idle__add (on %idle__add in /usr/lib64/libglib-2.0.so.0.5000.2)
You can now use it in all perf tools, such as:
perf record -e sdt_glib:idle__add -aR sleep 1
$ perf record -a -e sdt_glib:idle__add
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.175 MB perf.data ]
Suggested-and-Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170203102642.17258-1-ravi.bangoria@linux.vnet.ibm.com
[ s/Please use/Please first use/ and break the Hint line in two ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For debugging and testing it is useful to see the converted alias
string. Add support to perf stat/record and perf list to print the alias
conversion. The text string is saved in the alias structure. For perf
stat/record it is folded into the normal -v. For perf list -v was taken,
so we use --debug.
Before:
% perf list
...
cache:
l1d.replacement
[L1D data line replacements]
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
After
% perf list --debug
...
cache:
l1d.replacement
[L1D data line replacements]
cpu/umask=0x1,period=2000003,event=0x51/
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
cpu/umask=0x2,period=2000003,cmask=1,event=0x48/
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The code for handling pmu aliases without specifying the PMU hardcoded
only supported the cpu PMU.
This patch extends it to work for all PMUs. We always duplicate the
event for all PMUs that have an matching alias. This allows to
automatically expand an alias for all instances of a PMU (so for example
you can monitor all cache boxes with a single event)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support for registering json aliases per PMU. Any alias with an unit
matching the prefix is registered to the PMU. Uncore has multiple
instances of most units, so all these aliases get registered for each
individual PMU (this is important later to run the event on every
instance of the PMU).
To avoid printing the events multiple times in perf list filter out
duplicated events during printing.
v2: Rely on uncore_ prefix already in unit
v3: Document why calls were reordered
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Handle the "Unit" field, which is needed to find the right PMU for an
event. We call it "pmu" and convert it to the perf pmu name with an
uncore prefix.
Handle the "ExtSel" field, which just extends the event mask with an
additional bit.
Handle the "Filter" field which adds parameters to the main event
to configure filtering.
Handle the "Unit" field which declares the unit the values should be
scaled too (similar to what the kernel exports)
Set up the "perpkg" field for uncore events so that perf knows they are
per package (similar to what the kernel exports)
Then output the fields into the pmu-events data structures which are
compiled into perf.
Filter out zero fields, except for the event itself.
v2: Fix compilation. Add uncore_ prefix at pre-processing time.
Move eventcode change to separate patch.
v3: Remove extra __maybe_unused
v4: dont duplicate aliases for cpu pmu events
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The next patch needs to modify event code. Previously eventcode was just
passed through as a string. Now parse it as a number.
v2: Don't special case 0
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
These two debug messages are missing the trailing newline.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bintian Wang <bintian.wang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170207073412.26983-2-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since HAVE_KPROBES can be enabled in arm64, this patch introduces
regs_query_register_offset() to convert register name to offset for
arm64, so the BPF prologue feature is ready to use.
Signed-off-by: He Kuang <hekuang@huawei.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bintian Wang <bintian.wang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170207073412.26983-1-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The conflict was an interaction between a bug fix in the
netvsc driver in 'net' and an optimization of the RX path
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a variable called run_command_status that saves the status of the
executed commands and can be used by other functions later to test for
status.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
When performing a reboot of the test box, try to ssh to it. If it can't
connect for 5 seconds, then powercycle the box. This is useful because the
reboot is done via ssh, and if you can't ssh to the box because it is hung,
the reboot fails to reboot.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Add a timeout to performing an ssh command. This will let testing if a
machine is alive or not, or if something else may be amiss. A timeout can be
passed to ssh, where ssh will fail if it does not complete within the given
timeout.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The child_exit errno needs to be shifted by 8 bits to compare against the
return values for the bisect variables.
Fixes: c5dacb88f0a64 ("ktest: Allow overriding bisect test results")
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The POST_TEST config is to be executed after a test has fully compeleted,
whether the test passed or failed. It currently is executed at the moment
that the test has been decided if it failed or not. As the test does other
clean ups, it isn't truly finished. Move the POST_TEST execution to after
all the test cleanups have been done.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The patch fixes the case when adding a zero value to the packet
pointer. The zero value could come from src_reg equals type
BPF_K or CONST_IMM. The patch fixes both, otherwise the verifer
reports the following error:
[...]
R0=imm0,min_value=0,max_value=0
R1=pkt(id=0,off=0,r=4)
R2=pkt_end R3=fp-12
R4=imm4,min_value=4,max_value=4
R5=pkt(id=0,off=4,r=4)
269: (bf) r2 = r0 // r2 becomes imm0
270: (77) r2 >>= 3
271: (bf) r4 = r1 // r4 becomes pkt ptr
272: (0f) r4 += r2 // r4 += 0
addition of negative constant to packet pointer is not allowed
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Mihai Budiu <mbudiu@vmware.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These two tests are based on the work done for f23cc643f9ba. The first test is
just a basic one to make sure we don't allow AND'ing negative values, even if it
would result in a valid index for the array. The second is a cleaned up version
of the original testcase provided by Jann Horn that resulted in the commit.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To pick fixes that are affecting tests of new 'perf diff' features in
perf/core.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We want the hv and other fixes in here as well to handle merge and
testing issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This resolves the merge errors that were reported in linux-next and it
picks up the staging and IIO fixes that we need/want in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Reference count maps in callchains, fixing a SEGFAULT when referencing a
map after it is freed (Krister Johansen)
- Fix segfault on 'perf diff -o N' option (Namhyung Kim)
- Fix 'perf diff -o/--order' option behavior (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
"A fix for a bad opcode in objtool's instruction decoder"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix IRET's opcode
|
|
perf_event is a utility controller whose primary role is identifying
cgroup membership to filter perf events; however, because it also
tracks some per-css state, it can't be replaced by pure cgroup
membership test. Mark the controller as implicitly enabled on the
default hierarchy so that perf events can always be filtered based on
cgroup v2 path as long as the controller is not mounted on a legacy
hierarchy.
"perf record" is updated accordingly so that it searches for both v1
and v2 hierarchies. A v1 hierarchy is used if perf_event is mounted
on it; otherwise, it uses the v2 hierarchy.
v2: Doc updated to reflect more flexible rebinding behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
|
|
If dso__load_kcore frees all of the existing maps, but one has already
been attached to a callchain cursor node, then we can get a SIGSEGV in
any function that happens to try to use this invalid cursor. Use the
existing map refcount mechanism to forestall cleanup of a map until the
cursor iterates past the node.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@kernel.org
Fixes: 84c2cafa2889 ("perf tools: Reference count struct map")
Link: http://lkml.kernel.org/r/20170106062331.GB2707@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 21e6d8428664 ("perf diff: Use perf_hpp__register_sort_field
interface") changed list_add() to perf_hpp__register_sort_field().
This resulted in a behavior change since the field was added to the tail
instead of the head. So the -o option is mostly ignored due to its
order in the list.
This patch fixes it by adding perf_hpp__prepend_sort_field().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 21e6d8428664 ("perf diff: Use perf_hpp__register_sort_field interface")
Link: http://lkml.kernel.org/r/20170118051457.30946-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -o/--order option is to select column number to sort a diff result.
It does the job by adding a hpp field at the beginning of the sort list.
But it should not be added to the output field list as it has no
callbacks required by a output field.
During the setup_sorting(), the perf_hpp__setup_output_field() appends
the given sort keys to the output field if it's not there already.
Originally it was checked by fmt->list being non-empty. But commit
3f931f2c4274 ("perf hists: Make hpp setup function generic") changed it
to check the ->equal callback.
Anyways, we don't need to add the pseudo hpp field to the output field
list since it won't be used for output. So just skip fields if they
have no ->color or ->entry callbacks.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 3f931f2c4274 ("perf hists: Make hpp setup function generic")
Link: http://lkml.kernel.org/r/20170118051457.30946-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ingo pointed out that the MPX tests were no longer in the selftests
Makefile. It appears that I shot myself in the foot on this one
and accidentally removed them when I added the pkeys tests, probably
from bungling a merge conflict.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 5f23f6d082a9 ("x86/pkeys: Add self-tests")
Link: http://lkml.kernel.org/r/20170201225629.C3070852@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Allow configuring a 'perf ftrace' default --tracer (Taeung Song)
Infrastructure changes:
- Sync tools/arch/{powerpc,arm}/include/uapi/asm/kvm.h and
tools/arch/x86/include/asm/cpufeatures.h (Ingo Molnar)
- Add BPF program file system pinning APIs and respective
'perf test' entry (Joe Stringer)
- Make tools tree support 'make -s' (Josh Poimboeuf)
- Reference count maps in callchains, fixing SEGFAULT when
referencing maps after it is freed (Krister Johansen)
- Create for_each_event trace points iterator (Taeung Song)
- Do not consider an error not to have any perfconfig file
(Arnaldo Carvalho de Melo
- Propagate perf_config() errors (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently 'perf ftrace' command allows selecting 'function_graph' or
'function', defaulting to 'function_graph'.
Add ftrace.tracer config option to select the default tracer:
# cat ~/.perfconfig
[ftrace]
tracer = function
# perf ftrace usleep 123456 | head -10
<...>-14450 [002] d... 10089.284231: finish_task_switch <-__schedule
<...>-14450 [002] .... 10089.284232: finish_wait <-pipe_wait
<...>-14450 [002] .... 10089.284232: mutex_lock <-pipe_wait
<...>-14450 [002] .... 10089.284232: _cond_resched <-mutex_lock
Committer notes:
Retesting it with invalid variables, invalid values for ftrace.tracer,
and a valid one:
# cat ~/.perfconfig
[ftrace]
trace = function
# perf ftrace usleep 1
Error: wrong config key-value pair ftrace.trace=function
# cat ~/.perfconfig
[ftrace]
tracer = functin
# perf ftrace usleep 1
Please select "function_graph" (default) or "function"
Error: wrong config key-value pair ftrace.tracer=functin
# cat ~/.perfconfig
[ftrace]
tracer = function
# perf ftrace usleep 1 | head -5
<idle>-0 [000] d... 3855.820847: switch_mm_irqs_off <-__schedule
<...>-18550 [000] d... 3855.820849: finish_task_switch <-__schedule
<...>-18550 [000] d... 3855.820851: smp_irq_work_interrupt <-irq_work_interrupt
<...>-18550 [000] d... 3855.820851: irq_enter <-smp_irq_work_interrupt
<...>-18550 [000] d... 3855.820851: rcu_irq_enter <-irq_enter
#
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485862711-20216-3-git-send-email-treeze.taeung@gmail.com
[ Added missign space in error message, changed the logic to make it more compact and less error prone ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Similar to for_each_subsystem and for_each_event in util/parse-events.c,
add new macro 'for_each_event' for easy iteration over the tracepoints
in order to be more compact and readable.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485862711-20216-2-git-send-email-treeze.taeung@gmail.com
[ Slight change to keep existing style for checking strcmp() return ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test for the newly added BPF object pinning functionality.
For example:
# tools/perf/perf test 37
37: BPF filter :
37.1: Basic BPF filtering : Ok
37.2: BPF pinning : Ok
37.3: BPF prologue generation : Ok
37.4: BPF relocation checker : Ok
# tools/perf/perf test 37 -v 2>&1 | grep pinned
libbpf: pinned map '/sys/fs/bpf/perf_test/flip_table'
libbpf: pinned program '/sys/fs/bpf/perf_test/func=SyS_epoll_wait/0'
Signed-off-by: Joe Stringer <joe@ovn.org>
Requested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-7-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow mounting of the BPF filesystem at /sys/fs/bpf.
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-6-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
rm_rf() doesn't modify its path argument, and a future caller will pass
a string constant into it to delete.
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-5-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new API to pin a BPF object to the filesystem. The user can
specify the path within a BPF filesystem to pin the object.
Programs will be pinned under a subdirectory named the same as the
program, with each instance appearing as a numbered file under that
directory, and maps will be pinned under the path using the name of
the map as the file basename.
For example, with the directory '/sys/fs/bpf/foo' and a BPF object which
contains two instances of a program named 'bar', and a map named 'baz':
/sys/fs/bpf/foo/bar/0
/sys/fs/bpf/foo/bar/1
/sys/fs/bpf/foo/baz
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-4-joe@ovn.org
[ Check snprintf >= for truncation, as snprintf(bf, size, ...) == size also means truncation ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new API to pin a BPF map to the filesystem. The user can specify
the path full path within a BPF filesystem to pin the map.
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-3-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add new APIs to pin a BPF program (or specific instances) to the
filesystem. The user can specify the path full path within a BPF
filesystem to pin the program.
bpf_program__pin_instance(prog, path, n) will pin the nth instance of
'prog' to the specified path.
bpf_program__pin(prog, path) will create the directory 'path' (if it
does not exist) and pin each instance within that directory. For
instance, path/0, path/1, path/2.
Committer notes:
- Add missing headers for mkdir()
- Check strdup() for failure
- Check snprintf >= size, not >, as == also means truncated, see 'man
snprintf', return value.
- Conditionally define BPF_FS_MAGIC, as it isn't in magic.h in older
systems and we're not yet having a tools/include/uapi/linux/magic.h
copy.
- Do not include linux/magic.h, not present in older distros.
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-2-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If dso__load_kcore frees all of the existing maps, but one has already
been attached to a callchain cursor node, then we can get a SIGSEGV in
any function that happens to try to use this invalid cursor. Use the
existing map refcount mechanism to forestall cleanup of a map until the
cursor iterates past the node.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@kernel.org
Fixes: 84c2cafa2889 ("perf tools: Reference count struct map")
Link: http://lkml.kernel.org/r/20170106062331.GB2707@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:
- Dynticks updates, consolidating open-coded counter accesses into a well-defined API
- SRCU updates: Simplify algorithm, add formal verification
- Documentation updates
- Miscellaneous fixes
- Torture-test updates
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
{tools/,}arch/x86/include/asm/cpufeatures.h and {tools/,}arch/arm/include/uapi/asm/kvm.h
The following upstream headers were updated:
- The x86 cpufeatures.h file picked up a couple of new feature entries
- The PowerPC and ARM KVM headers picked up new features
None of which requires changes to perf tooling, so refresh the tooling copy.
Solves these build time warnings:
Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170130081131.GA8322@gmail.com
[ resync tools/arch/x86/include/asm/cpufeatures.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Two trivial overlapping changes conflicts in MPLS and mlx5.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The definition of WARN_ON being used by the radix tree test suite was
deficient in two ways: it did not provide a return value, and it stopped
execution instead of continuing. This version of WARN_ON tells you
which file & line the assertion was triggered in.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
|
|
By adding __set_bit and __clear_bit to the tools include directory, we
can share the bitops code. This reveals an include loop between kernel.h,
log2.h, bitmap.h and bitops.h. Break it the same way as the kernel does;
by moving the kernel.h include from bitops.h to bitmap.h.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
|
|
Pull networking fixes from David Miller:
1) GTP fixes from Andreas Schultz (missing genl module alias, clear IP
DF on transmit).
2) Netfilter needs to reflect the fwmark when sending resets, from Pau
Espin Pedrol.
3) nftable dump OOPS fix from Liping Zhang.
4) Fix erroneous setting of VIRTIO_NET_HDR_F_DATA_VALID on transmit,
from Rolf Neugebauer.
5) Fix build error of ipt_CLUSTERIP when procfs is disabled, from Arnd
Bergmann.
6) Fix regression in handling of NETIF_F_SG in harmonize_features(),
from Eric Dumazet.
7) Fix RTNL deadlock wrt. lwtunnel module loading, from David Ahern.
8) tcp_fastopen_create_child() needs to setup tp->max_window, from
Alexey Kodanev.
9) Missing kmemdup() failure check in ipv6 segment routing code, from
Eric Dumazet.
10) Don't execute unix_bind() under the bindlock, otherwise we deadlock
with splice. From WANG Cong.
11) ip6_tnl_parse_tlv_enc_lim() potentially reallocates the skb buffer,
therefore callers must reload cached header pointers into that skb.
Fix from Eric Dumazet.
12) Fix various bugs in legacy IRQ fallback handling in alx driver, from
Tobias Regnery.
13) Do not allow lwtunnel drivers to be unloaded while they are
referenced by active instances, from Robert Shearman.
14) Fix truncated PHY LED trigger names, from Geert Uytterhoeven.
15) Fix a few regressions from virtio_net XDP support, from John
Fastabend and Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (102 commits)
ISDN: eicon: silence misleading array-bounds warning
net: phy: micrel: add support for KSZ8795
gtp: fix cross netns recv on gtp socket
gtp: clear DF bit on GTP packet tx
gtp: add genl family modules alias
tcp: don't annotate mark on control socket from tcp_v6_send_response()
ravb: unmap descriptors when freeing rings
virtio_net: reject XDP programs using header adjustment
virtio_net: use dev_kfree_skb for small buffer XDP receive
r8152: check rx after napi is enabled
r8152: re-schedule napi for tx
r8152: avoid start_xmit to schedule napi when napi is disabled
r8152: avoid start_xmit to call napi_schedule during autosuspend
net: dsa: Bring back device detaching in dsa_slave_suspend()
net: phy: leds: Fix truncated LED trigger names
net: phy: leds: Break dependency of phy.h on phy_led_triggers.h
net: phy: leds: Clear phy_num_led_triggers on failure to avoid crash
net-next: ethernet: mediatek: change the compatible string
Documentation: devicetree: change the mediatek ethernet compatible string
bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status().
...
|
|
Previously these were being ignored, sometimes silently.
Stop doing that, emitting debug messages and handling the errors.
Testing it:
$ cat ~/.perfconfig
cat: /home/acme/.perfconfig: No such file or directory
$ perf stat -e cycles usleep 1
Performance counter stats for 'usleep 1':
938,996 cycles:u
0.003813731 seconds time elapsed
$ perf top --stdio
Error:
You may not have permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
<SNIP>
[ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ]
[acme@jouet linux]$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
# Overhead Command Shared Object Symbol
# ........ ....... ................. .........................
71.77% usleep libc-2.24.so [.] _dl_addr
27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry
1.13% usleep [kernel.kallsyms] [k] page_fault
$
$ touch ~/.perfconfig
$ ls -la ~/.perfconfig
-rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig
$
$ perf stat -e instructions usleep 1
Performance counter stats for 'usleep 1':
244,610 instructions:u
0.000805383 seconds time elapsed
$
[root@jouet ~]# chown acme.acme ~/.perfconfig
[root@jouet ~]# perf stat -e cycles usleep 1
Warning: File /root/.perfconfig not owned by current user or root, ignoring it.
Performance counter stats for 'usleep 1':
937,615 cycles
0.000836931 seconds time elapsed
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While propagating the errors from perf_config(), which were being
completely ignored, everything stopped working for people without a
~/.perfconfig file, because the perf_config_set__init() was considering
an error not to have a .perfconfig file, duh, fix it by checking the
errno after the failed stat() call.
It should also not return an error when it says it is ignoring the file,
and also a empty file should not return an error either.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8beeb00f2c84 ("perf config: Use new perf_config_set__init() to initialize config set")
Link: http://lkml.kernel.org/n/tip-ygpbab3apbs6l8wr97xedwks@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge Linus master to get the connector locking revert.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits)
sysctl: fix proc_doulongvec_ms_jiffies_minmax()
Revert "drm/probe-helpers: Drop locking from poll_enable"
MAINTAINERS: add Dan Streetman to zbud maintainers
MAINTAINERS: add Dan Streetman to zswap maintainers
mm: do not export ioremap_page_range symbol for external module
mn10300: fix build error of missing fpu_save()
romfs: use different way to generate fsid for BLOCK or MTD
frv: add missing atomic64 operations
mm, page_alloc: fix premature OOM when racing with cpuset mems update
mm, page_alloc: move cpuset seqcount checking to slowpath
mm, page_alloc: fix fast-path race with cpuset update or removal
mm, page_alloc: fix check for NULL preferred_zone
kernel/panic.c: add missing \n
fbdev: color map copying bounds checking
frv: add atomic64_add_unless()
mm/mempolicy.c: do not put mempolicy before using its nodemask
radix-tree: fix private list warnings
Documentation/filesystems/proc.txt: add VmPin
mm, memcg: do not retry precharge charges
proc: add a schedule point in proc_pid_readdir()
...
|
