| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, parseargs.sh expects to consume all the command-line arguments,
which prevents the calling script from having any of its own arguments.
This commit therefore causes parseargs.sh to stop consuming arguments
when it encounters a "--" argument, leaving any remaining arguments for
the calling script.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The history-check scripts currently use grep to ignore non-C-language
litmus tests, which is a bit fragile. This commit therefore enlists the
aid of "mselect7 -arch C", given Luc Maraget's recent modifications that
allow mselect7 to operate in filter mode.
This change requires herdtools 7.52-32-g1da3e0e50977 or later.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The checkghlitmus.sh script currently uses grep to ignore non-C-language
litmus tests, which is a bit fragile. This commit therefore enlists the
aid of "mselect7 -arch C", given Luc Maraget's recent modifications that
allow mselect7 to operate in filter mode.
This change requires herdtools 7.52-32-g1da3e0e50977 or later.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The parseargs.sh regular expression for the --jobs argument incorrectly
requires that the number of jobs be at least 10, that is, have at least
two digits. This commit therefore adjusts this regular expression to
allow single-digit numbers of jobs to be specified.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commits enables the "--hw" argument for the checkghlitmus.sh script,
causing it to convert any applicable C-language litmus tests to the
specified flavor of assembly language, to verify these assembly-language
litmus tests, and checking compatibility of the outcomes.
Note that the conversion does not yet handle locking, RCU, SRCU, plain
C-language memory accesses, or casts.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Adding the -v flag to jingle7 invocations gives much useful information
on why jingle7 didn't like a given litmus test. This commit therefore
adds this flag and saves off any such information into a .err file.
Suggested-by: Luc Maranget <luc.maranget@inria.fr>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It turns out that the jingle7 tool is currently a bit picky about
the litmus tests it is willing to process. This commit therefore
ensures that jingle7 failures are reported.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, the scripts specify the CPU's .cat file to herd. But this is
pointless because herd will select a good and sufficient .cat file from
the assembly-language litmus test itself. This commit therefore removes
the -model argument to herd, allowing herd to figure the CPU family out
itself.
Note that the user can override herd's choice using the "--herdopts"
argument to the scripts.
Suggested-by: Luc Maranget <luc.maranget@inria.fr>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit retains the assembly-language litmus tests generated from
the C-language litmus tests, appending the hardware tag to the original
C-language litmus test's filename. Thus, S+poonceonces.litmus.AArch64
contains the Armv8 assembly language corresponding to the C-language
S+poonceonces.litmus test.
This commit also updates the .gitignore to avoid committing these
automatically generated assembly-language litmus tests.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When the github scripts see ".litmus.out", they assume that there must be
a corresponding C-language ".litmus" file. Won't they be disappointed
when they instead see nothing, or, worse yet, the corresponding
assembly-language litmus test? This commit therefore swaps the hardware
tag with the "litmus" to avoid this sort of disappointment.
This commit also adjusts the .gitignore file so as to avoid adding these
new ".out" files to git.
[ paulmck: Apply Akira Yokosawa feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
In the absence of "Result:" comments, the runlitmus.sh script relies on
litmus.out files from prior LKMM runs. This can be a bit user-hostile,
so this commit makes runlitmus.sh generate any needed .litmus.out files
that don't already exist.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit prepares for adding --hw capability to github litmus-test
scripts by splitting runlitmus.sh (which simply runs the verification)
out of checklitmus.sh (which also judges the results).
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The judgelitmus.sh script currently relies solely on the "Result:"
comment in the .litmus file. This is problematic when using the --hw
argument, because it is necessary to check the hardware model against
LKMM even in the absence of "Result:" comments.
This commit therefore modifies judgelitmus.sh to check the observation
in a .litmus.out file, in case one was generated by a previous LKMM run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit makes checklitmus.sh and checkalllitmus.sh check to see
if a hardware verification was specified (via the --hw command-line
argument, which sets the LKMM_HW_MAP_FILE environment variable).
If so, the C-language litmus test is converted to the specified type
of assembly-language litmus test and herd is run on it. Hardware is
permitted to be stronger than LKMM requires, so "Always" and "Never"
verifications of "Sometimes" C-language litmus tests are forgiven.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The checkalllitmus.sh runs litmus tests in the litmus-tests directory,
not those in the github archive, so this commit updates the comment to
reflect this reality.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit abstracts out common function to check a given litmus test
for locking, RCU, and SRCU in order to avoid duplicating code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit makes the judgelitmus.sh script check the --hw argument
(AKA the LKMM_HW_MAP_FILE environment variable) and to adjust its
judgment for a run where a C-language litmus test has been translated to
assembly and the assembly version verified. In this case, the assembly
verification output is checked against the C-language script's "Result:"
comment. However, because hardware can be stronger than LKMM requires,
the judgelitmus.sh script forgives verification mismatches featuring
a "Sometimes" in the C-language script and an "Always" or "Never"
assembly-language verification.
Note that deadlock is not forgiven, however, this should not normally be
an issue given that C-language tests containing locking, RCU, or SRCU
cannot be translated to assembly. However, this issue can crop up in
litmus tests that mimic deadlock by using the "filter" clause to ignore
all executions. It can also crop up when certain herd arguments are
used to autofilter everything that does not match the "exists" clause
in cases where the "exists" clause cannot be satisfied.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a --hw argument to parseargs.sh to specify the CPU
family for a hardware verification. For example, "--hw AArch64" will
specify that a C-language litmus test is to be translated to ARMv8 and
the result verified. This will set the LKMM_HW_MAP_FILE environment
variable accordingly. If there is no --hw argument, this environment
variable will be set to the empty string.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If a litmus test specifies "Result: Never" and if it contains an
unconditional ("hard") deadlock, then running checklitmus.sh on it will
not flag any errors, despite the fact that there are no executions.
This commit therefore updates judgelitmus.sh to complain about tests
with no executions that are marked, but not as "Result: DEADLOCK".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, judgelitmus.sh treats use of unknown primitives (such as
srcu_read_lock() prior to SRCU support) as "!!! Verification error".
This can be misleading because it fails to call out typos and running
a version LKMM on a litmus test requiring a feature not provided by
that version. This commit therefore changes judgelitmus.sh to check
for unknown primitives and to report them, for example, with:
'!!! Current LKMM version does not know "rcu_write_lock"'.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, cmplitmushist.sh treats timeouts (as in the "--timeout"
argument) as "Missing Observation line". This can be misleading because
it is quite possible that running the test longer would have produced
a verification. This commit therefore changes cmplitmushist.sh to check
for timeouts and to report them with "Timed out".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, judgelitmus.sh treats timeouts (as in the "--timeout" argument)
as "!!! Verification error". This can be misleading because it is quite
possible that running the test longer would have produced a verification.
This commit therefore changes judgelitmus.sh to check for timeouts and
to report them with "!!! Timeout".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Most Linux-kernel uses of locking are straightforward, but there are
corner-case uses that rely on less well-known aspects of the lock and
unlock primitives. This commit therefore adds a locking.txt and litmus
tests in Documentation/litmus-tests/locking to explain these corner-case
uses.
[ paulmck: Apply Andrea Parri feedback for klitmus7. ]
[ paulmck: Apply Akira Yokosawa example-consistency feedback. ]
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi and bluetooth.
Current release - regressions:
- wifi: mt76: mt7915: add back 160MHz channel width support for
MT7915
- libbpf: revert poisoning of strlcpy, it broke uClibc-ng
Current release - new code bugs:
- bpf: improve the coverage of the "allow reads from uninit stack"
feature to fix verification complexity problems
- eth: am65-cpts: reset PPS genf adj settings on enable
Previous releases - regressions:
- wifi: mac80211: serialize ieee80211_handle_wake_tx_queue()
- wifi: mt76: do not run mt76_unregister_device() on unregistered hw,
fix null-deref
- Bluetooth: btqcomsmd: fix command timeout after setting BD address
- eth: igb: revert rtnl_lock() that causes a deadlock
- dsa: mscc: ocelot: fix device specific statistics
Previous releases - always broken:
- xsk: add missing overflow check in xdp_umem_reg()
- wifi: mac80211:
- fix QoS on mesh interfaces
- fix mesh path discovery based on unicast packets
- Bluetooth:
- ISO: fix timestamped HCI ISO data packet parsing
- remove "Power-on" check from Mesh feature
- usbnet: more fixes to drivers trusting packet length
- wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
- Bluetooth: btintel: iterate only bluetooth device ACPI entries
- eth: iavf: fix inverted Rx hash condition leading to disabled hash
- eth: igc: fix the validation logic for taprio's gate list
- dsa: tag_brcm: legacy: fix daisy-chained switches
Misc:
- bpf: adjust insufficient default bpf_jit_limit to account for
growth of BPF use over the last 5 years
- xdp: bpf_xdp_metadata() use EOPNOTSUPP as unique errno indicating
no driver support"
* tag 'net-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
Bluetooth: HCI: Fix global-out-of-bounds
Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
Bluetooth: L2CAP: Fix responding with wrong PDU type
Bluetooth: btqcomsmd: Fix command timeout after setting BD address
Bluetooth: btinel: Check ACPI handle for NULL before accessing
net: mdio: thunder: Add missing fwnode_handle_put()
net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case
net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()
net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()
net: asix: fix modprobe "sysfs: cannot create duplicate filename"
gve: Cache link_speed value from device
tools: ynl: Fix genlmsg header encoding formats
net: enetc: fix aggregate RMON counters not showing the ranges
Bluetooth: Remove "Power-on" check from Mesh feature
Bluetooth: Fix race condition in hci_cmd_sync_clear
Bluetooth: btintel: Iterate only bluetooth device ACPI entries
Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
Bluetooth: btusb: Remove detection of ISO packets over bulk
Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
...
|
|
Remove unused variable from the MDWE test.
[joey.gouly@arm.com: add commit message]
Link: https://lkml.kernel.org/r/20230308190423.46491-4-joey.gouly@arm.com
Fixes: 4cf1fe34fd18 ("kselftest: vm: add tests for memory-deny-write-execute")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: nd <nd@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-03-23
We've added 8 non-merge commits during the last 13 day(s) which contain
a total of 21 files changed, 238 insertions(+), 161 deletions(-).
The main changes are:
1) Fix verification issues in some BPF programs due to their stack usage
patterns, from Eduard Zingerman.
2) Fix to add missing overflow checks in xdp_umem_reg and return an error
in such case, from Kal Conley.
3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for
libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia.
4) Fix insufficient bpf_jit_limit default to avoid users running into hard
to debug seccomp BPF errors, from Daniel Borkmann.
5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc
to make it unambiguous from other errors, from Jesper Dangaard Brouer.
6) Two BPF selftest fixes to address compilation errors from recent changes
in kernel structures, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support
bpf: Adjust insufficient default bpf_jit_limit
xsk: Add missing overflow check in xdp_umem_reg
selftests/bpf: Fix progs/test_deny_namespace.c issues.
selftests/bpf: Fix progs/find_vma_fail1.c build error.
libbpf: Revert poisoning of strlcpy
selftests/bpf: Tests for uninitialized stack reads
bpf: Allow reads from uninit stack
====================
Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pack strings use 'b' signed char for cmd and version but struct
genlmsghdr defines them as unsigned char. Use 'B' instead.
Fixes: 4e4480e89c47 ("tools: ynl: move the cli and netlink code around")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230319193803.97453-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expand the discussion of SRCU and its read-side critical sections in
the Linux Kernel Memory Model documentation file explanation.txt. The
new material discusses recent changes to the memory model made in
commit 6cd244c87428 ("tools/memory-model: Provide exact SRCU
semantics").
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Co-developed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Jonas Oberhauser <jonas.oberhauser@huawei.com>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
CC: Will Deacon <will@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
As stated in the documentation and implied by its name, the ppo
(preserved program order) relation is intended to link po-earlier
to po-later instructions under certain conditions. However, a
corner case currently allows instructions to be linked by ppo that
are not executed by the same thread, i.e., instructions are being
linked that have no po relation.
This happens due to the mb/strong-fence/fence relations, which (as
one case) provide order when locks are passed between threads
followed by an smp_mb__after_unlock_lock() fence. This is
illustrated in the following litmus test (as can be seen when using
herd7 with `doshow ppo`):
P0(spinlock_t *x, spinlock_t *y)
{
spin_lock(x);
spin_unlock(x);
}
P1(spinlock_t *x, spinlock_t *y)
{
spin_lock(x);
smp_mb__after_unlock_lock();
*y = 1;
}
The ppo relation will link P0's spin_lock(x) and P1's *y=1, because
P0 passes a lock to P1 which then uses this fence.
The patch makes ppo a subrelation of po by letting fence contribute
to ppo only in case the fence links events of the same thread.
Signed-off-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
LKMM has long provided only approximate handling of SRCU read-side
critical sections. This has not been a pressing problem because LKMM's
traditional handling is correct for the common cases of non-overlapping
and properly nested critical sections. However, LKMM's traditional
handling of partially overlapping critical sections incorrectly fuses
them into one large critical section.
For example, consider the following litmus test:
------------------------------------------------------------------------
C C-srcu-nest-5
(*
* Result: Sometimes
*
* This demonstrates non-nested overlapping of SRCU read-side critical
* sections. Unlike RCU, SRCU critical sections do not unconditionally
* nest.
*)
{}
P0(int *x, int *y, struct srcu_struct *s1)
{
int r1;
int r2;
int r3;
int r4;
r3 = srcu_read_lock(s1);
r2 = READ_ONCE(*y);
r4 = srcu_read_lock(s1);
srcu_read_unlock(s1, r3);
r1 = READ_ONCE(*x);
srcu_read_unlock(s1, r4);
}
P1(int *x, int *y, struct srcu_struct *s1)
{
WRITE_ONCE(*y, 1);
synchronize_srcu(s1);
WRITE_ONCE(*x, 1);
}
locations [0:r1]
exists (0:r1=1 /\ 0:r2=0)
------------------------------------------------------------------------
Current mainline incorrectly flattens the two critical sections into
one larger critical section, giving "Never" instead of the correct
"Sometimes":
------------------------------------------------------------------------
$ herd7 -conf linux-kernel.cfg C-srcu-nest-5.litmus
Test C-srcu-nest-5 Allowed
States 3
0:r1=0; 0:r2=0;
0:r1=0; 0:r2=1;
0:r1=1; 0:r2=1;
No
Witnesses
Positive: 0 Negative: 3
Flag srcu-bad-nesting
Condition exists (0:r1=1 /\ 0:r2=0)
Observation C-srcu-nest-5 Never 0 3
Time C-srcu-nest-5 0.01
Hash=e692c106cf3e84e20f12991dc438ff1b
------------------------------------------------------------------------
To its credit, it does complain about bad nesting. But with this
commit we get the following result, which has the virtue of being
correct:
------------------------------------------------------------------------
$ herd7 -conf linux-kernel.cfg C-srcu-nest-5.litmus
Test C-srcu-nest-5 Allowed
States 4
0:r1=0; 0:r2=0;
0:r1=0; 0:r2=1;
0:r1=1; 0:r2=0;
0:r1=1; 0:r2=1;
Ok
Witnesses
Positive: 1 Negative: 3
Condition exists (0:r1=1 /\ 0:r2=0)
Observation C-srcu-nest-5 Sometimes 1 3
Time C-srcu-nest-5 0.05
Hash=e692c106cf3e84e20f12991dc438ff1b
------------------------------------------------------------------------
In addition, there are new srcu_down_read() and srcu_up_read()
functions on their way to mainline. Roughly speaking, these are to
srcu_read_lock() and srcu_read_unlock() as down() and up() are to
mutex_lock() and mutex_unlock(). The key point is that
srcu_down_read() can execute in one process and the matching
srcu_up_read() in another, as shown in this litmus test:
------------------------------------------------------------------------
C C-srcu-nest-6
(*
* Result: Never
*
* This would be valid for srcu_down_read() and srcu_up_read().
*)
{}
P0(int *x, int *y, struct srcu_struct *s1, int *idx, int *f)
{
int r2;
int r3;
r3 = srcu_down_read(s1);
WRITE_ONCE(*idx, r3);
r2 = READ_ONCE(*y);
smp_store_release(f, 1);
}
P1(int *x, int *y, struct srcu_struct *s1, int *idx, int *f)
{
int r1;
int r3;
int r4;
r4 = smp_load_acquire(f);
r1 = READ_ONCE(*x);
r3 = READ_ONCE(*idx);
srcu_up_read(s1, r3);
}
P2(int *x, int *y, struct srcu_struct *s1)
{
WRITE_ONCE(*y, 1);
synchronize_srcu(s1);
WRITE_ONCE(*x, 1);
}
locations [0:r1]
filter (1:r4=1)
exists (1:r1=1 /\ 0:r2=0)
------------------------------------------------------------------------
When run on current mainline, this litmus test gets a complaint about
an unknown macro srcu_down_read(). With this commit:
------------------------------------------------------------------------
herd7 -conf linux-kernel.cfg C-srcu-nest-6.litmus
Test C-srcu-nest-6 Allowed
States 3
0:r1=0; 0:r2=0; 1:r1=0;
0:r1=0; 0:r2=1; 1:r1=0;
0:r1=0; 0:r2=1; 1:r1=1;
No
Witnesses
Positive: 0 Negative: 3
Condition exists (1:r1=1 /\ 0:r2=0)
Observation C-srcu-nest-6 Never 0 3
Time C-srcu-nest-6 0.02
Hash=c1f20257d052ca5e899be508bedcb2a1
------------------------------------------------------------------------
Note that the user must supply the flag "f" and the "filter" clause,
similar to what must be done to emulate call_rcu().
The commit works by treating srcu_read_lock()/srcu_down_read() as
loads and srcu_read_unlock()/srcu_up_read() as stores. This allows us
to determine which unlock matches which lock by looking for a data
dependency between them. In order for this to work properly, the data
dependencies have to be tracked through stores to intermediate
variables such as "idx" in the litmus test above; this is handled by
the new carry-srcu-data relation. But it's important here (and in the
existing carry-dep relation) to avoid tracking the dependencies
through SRCU unlock stores. Otherwise, in situations resembling:
A: r1 = srcu_read_lock(s);
B: srcu_read_unlock(s, r1);
C: r2 = srcu_read_lock(s);
D: srcu_read_unlock(s, r2);
it would look as if D was dependent on both A and C, because "s" would
appear to be an intermediate variable written by B and read by C.
This explains the complications in the definitions of carry-srcu-dep
and carry-dep.
As a debugging aid, the commit adds a check for errors in which the
value returned by one call to srcu_read_lock()/srcu_down_read() is
passed to more than one instance of srcu_read_unlock()/srcu_up_read().
Finally, since these SRCU-related primitives are now treated as
ordinary reads and writes, we have to add them into the lists of
marked accesses (i.e., not subject to data races) and lock-related
accesses (i.e., one shouldn't try to access an srcu_struct with a
non-lock-related primitive such as READ_ONCE() or a plain write).
Portions of this approach were suggested by Boqun Feng and Jonas
Oberhauser.
[ paulmck: Fix space-before-tab whitespace nit. ]
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
During a code-reading exercise of linux-kernel.cat CAT file, I generated
a graph to show the to-r relations. While likely not problematic for the
model, I found it confusing that a read-write address dependency would
show as a to-r edge on the graph.
This patch therefore restricts the to-r links derived from addr to only
read-read address dependencies, so that read-write address dependencies don't
show as to-r in the graphs. This should also prevent future users of to-r from
deriving incorrect relations. Note that a read-write address dep, obviously,
still ends up in the ppo relation via the to-w relation.
I verified that a read-read address dependency still shows up as a to-r
link in the graph, as it did before.
For reference, the problematic graph was generated with the following
command:
herd7 -conf linux-kernel.cfg \
-doshow dep -doshow to-r -doshow to-w ./foo.litmus -show all -o OUT/
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds support for smp_mb__after_srcu_read_unlock(), which,
when combined with a prior srcu_read_unlock(), implies a full memory
barrier. No ordering is guaranteed to accesses between the two, and
placing accesses between is bad practice in any case.
Tests may be found at https://github.com/paulmckrcu/litmus in files
matching manual/kernel/C-srcu-mb-*.litmus.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
LKMM uses two relations for talking about UNLOCK+LOCK pairings:
1) po-unlock-lock-po, which handles UNLOCK+LOCK pairings
on the same CPU or immediate lock handovers on the same
lock variable
2) po;[UL];(co|po);[LKW];po, which handles UNLOCK+LOCK pairs
literally as described in rcupdate.h#L1002, i.e., even
after a sequence of handovers on the same lock variable.
The latter relation is used only once, to provide the guarantee
defined in rcupdate.h#L1002 by smp_mb__after_unlock_lock(), which
makes any UNLOCK+LOCK pair followed by the fence behave like a full
barrier.
This patch drops this use in favor of using po-unlock-lock-po
everywhere, which unifies the way the model talks about UNLOCK+LOCK
pairings. At first glance this seems to weaken the guarantee given
by LKMM: When considering a long sequence of lock handovers
such as below, where P0 hands the lock to P1, which hands it to P2,
which finally executes such an after_unlock_lock fence, the mb
relation currently links any stores in the critical section of P0
to instructions P2 executes after its fence, but not so after the
patch.
P0(int *x, int *y, spinlock_t *mylock)
{
spin_lock(mylock);
WRITE_ONCE(*x, 2);
spin_unlock(mylock);
WRITE_ONCE(*y, 1);
}
P1(int *y, int *z, spinlock_t *mylock)
{
int r0 = READ_ONCE(*y); // reads 1
spin_lock(mylock);
spin_unlock(mylock);
WRITE_ONCE(*z,1);
}
P2(int *z, int *d, spinlock_t *mylock)
{
int r1 = READ_ONCE(*z); // reads 1
spin_lock(mylock);
spin_unlock(mylock);
smp_mb__after_unlock_lock();
WRITE_ONCE(*d,1);
}
P3(int *x, int *d)
{
WRITE_ONCE(*d,2);
smp_mb();
WRITE_ONCE(*x,1);
}
exists (1:r0=1 /\ 2:r1=1 /\ x=2 /\ d=2)
Nevertheless, the ordering guarantee given in rcupdate.h is actually
not weakened. This is because the unlock operations along the
sequence of handovers are A-cumulative fences. They ensure that any
stores that propagate to the CPU performing the first unlock
operation in the sequence must also propagate to every CPU that
performs a subsequent lock operation in the sequence. Therefore any
such stores will also be ordered correctly by the fence even if only
the final handover is considered a full barrier.
Indeed this patch does not affect the behaviors allowed by LKMM at
all. The mb relation is used to define ordering through:
1) mb/.../ppo/hb, where the ordering is subsumed by hb+ where the
lock-release, rfe, and unlock-acquire orderings each provide hb
2) mb/strong-fence/cumul-fence/prop, where the rfe and A-cumulative
lock-release orderings simply add more fine-grained cumul-fence
edges to substitute a single strong-fence edge provided by a long
lock handover sequence
3) mb/strong-fence/pb and various similar uses in the definition of
data races, where as discussed above any long handover sequence
can be turned into a sequence of cumul-fence edges that provide
the same ordering.
Signed-off-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Some of the warning labels used in the LKMM are unfortunately
ambiguous. In particular, the same warning is used for both an
unmatched rcu_read_lock() call and for an unmatched rcu_read_unlock()
call. Likewise for the srcu_* equivalents. Also, the warning about
passing a wrong value to srcu_read_unlock() -- i.e., a value different
from the one returned by the matching srcu_read_lock() -- talks about
bad nesting rather than non-matching values.
Let's update the warning labels to make their meanings more clear.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Include a test case to validate the XTILEDATA injection to the target.
Also, it ensures the kernel's ability to copy states between different
XSAVE formats.
Refactor the memcmp() code to be usable for the state validation.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230227210504.18520-3-chang.seok.bae%40intel.com
|
|
After a couple of years and multiple LTS releases we received a report
that the behavior of O_DIRECTORY | O_CREAT changed starting with v5.7.
On kernels prior to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL
had the following semantics:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: create regular file
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: EISDIR
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: create regular file
* d exists and is a regular file: EEXIST
* d exists and is a directory: EEXIST
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
On kernels since to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL
have the following semantics:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: ENOTDIR (create regular file)
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: EISDIR
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: ENOTDIR (create regular file)
* d exists and is a regular file: EEXIST
* d exists and is a directory: EEXIST
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
This is a fairly substantial semantic change that userspace didn't
notice until Pedro took the time to deliberately figure out corner
cases. Since no one noticed this breakage we can somewhat safely assume
that O_DIRECTORY | O_CREAT combinations are likely unused.
The v5.7 breakage is especially weird because while ENOTDIR is returned
indicating failure a regular file is actually created. This doesn't make
a lot of sense.
Time was spent finding potential users of this combination. Searching on
codesearch.debian.net showed that codebases often express semantical
expectations about O_DIRECTORY | O_CREAT which are completely contrary
to what our code has done and currently does.
The expectation often is that this particular combination would create
and open a directory. This suggests users who tried to use that
combination would stumble upon the counterintuitive behavior no matter
if pre-v5.7 or post v5.7 and quickly realize neither semantics give them
what they want. For some examples see the code examples in [1] to [3]
and the discussion in [4].
There are various ways to address this issue. The lazy/simple option
would be to restore the pre-v5.7 behavior and to just live with that bug
forever. But since there's a real chance that the O_DIRECTORY | O_CREAT
quirk isn't relied upon we should try to get away with murder(ing bad
semantics) first. If we need to Frankenstein pre-v5.7 behavior later so
be it.
So let's simply return EINVAL categorically for O_DIRECTORY | O_CREAT
combinations. In addition to cleaning up the old bug this also opens up
the possiblity to make that flag combination do something more intuitive
in the future.
Starting with this commit the following semantics apply:
(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
* d doesn't exist: EINVAL
* d exists and is a regular file: EINVAL
* d exists and is a directory: EINVAL
(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
* d doesn't exist: EINVAL
* d exists and is a regular file: EINVAL
* d exists and is a directory: EINVAL
(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
* d doesn't exist: ENOENT
* d exists and is a regular file: ENOTDIR
* d exists and is a directory: open directory
One additional note, O_TMPFILE is implemented as:
#define __O_TMPFILE 020000000
#define O_TMPFILE (__O_TMPFILE | O_DIRECTORY)
#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT)
For older kernels it was important to return an explicit error when
O_TMPFILE wasn't supported. So O_TMPFILE requires that O_DIRECTORY is
raised alongside __O_TMPFILE. It also enforced that O_CREAT wasn't
specified. Since O_DIRECTORY | O_CREAT could be used to create a regular
allowing that combination together with __O_TMPFILE would've meant that
false positives were possible, i.e., that a regular file was created
instead of a O_TMPFILE. This could've been used to trick userspace into
thinking it operated on a O_TMPFILE when it wasn't.
Now that we block O_DIRECTORY | O_CREAT completely the check for O_CREAT
in the __O_TMPFILE branch via if ((flags & O_TMPFILE_MASK) != O_TMPFILE)
can be dropped. Instead we can simply check verify that O_DIRECTORY is
raised via if (!(flags & O_DIRECTORY)) and explain this in two comments.
As Aleksa pointed out O_PATH is unaffected by this change since it
always returned EINVAL if O_CREAT was specified - with or without
O_DIRECTORY.
Link: https://lore.kernel.org/lkml/20230320071442.172228-1-pedro.falcato@gmail.com
Link: https://sources.debian.org/src/flatpak/1.14.4-1/subprojects/libglnx/glnx-dirfd.c/?hl=324#L324 [1]
Link: https://sources.debian.org/src/flatpak-builder/1.2.3-1/subprojects/libglnx/glnx-shutil.c/?hl=251#L251 [2]
Link: https://sources.debian.org/src/ostree/2022.7-2/libglnx/glnx-dirfd.c/?hl=324#L324 [3]
Link: https://www.openwall.com/lists/oss-security/2014/11/26/14 [4]
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since commit 6c40624930c5 ("bootconfig: Increase max nodes of bootconfig
from 1024 to 8192 for DCC support") increased the max number of bootconfig
node to 8192, the bootconfig testcase of the max number of nodes fails.
To fix this issue, we can not simply increase the number in the test script
because the test bootconfig file becomes too big (>32KB). To fix that, we
can use a combination of three alphabets (26^3 = 17576). But with that,
we can not express the 8193 (just one exceed from the limitation) because
it also exceeds the max size of bootconfig. So, the first 26 nodes will just
use one alphabet.
With this fix, test-bootconfig.sh passes all tests.
Link: https://lore.kernel.org/all/167888844790.791176.670805252426835131.stgit@devnote2/
Reported-by: Heinz Wiesinger <pprkut@slackware.com>
Link: https://lore.kernel.org/all/2463802.XAFRqVoOGU@amaterasu.liwjatan.org
Fixes: 6c40624930c5 ("bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Building sigaltstack with clang via:
$ ARCH=x86 make LLVM=1 -C tools/testing/selftests/sigaltstack/
produces the following warning:
warning: variable 'sp' is uninitialized when used here [-Wuninitialized]
if (sp < (unsigned long)sstack ||
^~
Clang expects these to be declared at global scope; we've fixed this in
the kernel proper by using the macro `current_stack_pointer`. This is
defined in different headers for different target architectures, so just
create a new header that defines the arch-specific register names for
the stack pointer register, and define it for more targets (at least the
ones that support current_stack_pointer/ARCH_HAS_CURRENT_STACK_POINTER).
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/lkml/CA+G9fYsi3OOu7yCsMutpzKDnBMAzJBCPimBp86LhGBa0eCnEpA@mail.gmail.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Reindent only, no functional changes.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Add support for LoongArch (64 bit) to nolibc selftest.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Add support for LoongArch (32 and 64 bit) to nolibc.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
LoongArch and RISC-V 32-bit only have statx(). ARC, Hexagon, Nios2 and
OpenRISC have statx() and stat64() but not stat() or newstat(). Add
statx() and make stat() rely on statx() if necessary to make them happy.
We may just use statx() for all architectures in the future.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Include linux/fcntl.h for O_* and AT_*. asm/fcntl.h is included
by linux/fcntl.h, so it can be safely removed.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Defining S_I* flags in types.h can cause some build failures if
linux/stat.h is included prior to it. But if not defined, some toolchains
that include some glibc parts will in turn fail because linux/stat.h
already takes care of avoiding these definitions when glibc is present.
Let's preserve the macros here but first include linux/stat.h and check
for their definition before doing so. We also define the previously
missing permission macros so that we don't get a different behavior
depending on the first include found.
Cc: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
These two tests always fail when the program is started natively as an
unprivileged user, and require the user to carefully check the output
of "make run-user" and ignore them.
Let's add an euid check and condition these two tests to euid==0. Now
the test case stops needlessly reporting failures. E.g.:
$ make -C tools/testing/selftests/nolibc run-user
...
CC nolibc-test
123 test(s) passed.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This can be useful to avoid attempting some privileged operations,
starting from the nolibc-test tool that gets two failures when not
privileged.
We call getuid32() and geteuid32() when they are defined, and fall
back to getuid() and geteuid() otherwise.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds tests for the limits added in a previous commit. The
limits are defined in decimal in stdint.h and as hexadecimal in the
tests (e.g. 0x7f = 127 or 0x80 = -128). Hopefully it catches some of the
most egregious mistakes.
As we rely on the compiler to provide __SIZEOF_LONG__, we also test
whether it is defined.
Signed-off-by: Vincent Dagonneau <v@vda.io>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit enlarges the column width from 40 to 64 characters to make
room for longer tests
Signed-off-by: Vincent Dagonneau <v@vda.io>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
