| Age | Commit message (Collapse) | Author |
|---|
|
Add 3 per-cpu monitors as part of the sched model:
* scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
* snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
* sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
To: Ingo Molnar <mingo@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-6-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a per-task monitor as part of the sched model:
* snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
To: Ingo Molnar <mingo@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-5-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add 2 per-cpu monitors as part of the sched model:
* sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
* tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
To: Ingo Molnar <mingo@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-4-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add the following tracepoints:
* sched_entry(bool preempt, ip)
Called while entering __schedule
* sched_exit(bool is_switch, ip)
Called while exiting __schedule
* sched_set_state(task, curr_state, state)
Called when a task changes its state (to and from running)
These tracepoints are useful to describe the Linux task model and are
adapted from the patches by Daniel Bristot de Oliveira
(https://bristot.me/linux-task-model/).
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In linux-next
commit c760174401f6 ("perf cpumap: Reduce cpu size from int to int16_t")
causes the perf tests 100 126 to fail on s390:
Output before:
# ./perf test 100
100: perf trace BTF general tests : FAILED!
#
The root cause is the change from int to int16_t for the
cpu maps. The size of the CPU key value pair changes from
four bytes to two bytes. However a two byte key size is
not supported for bpf_map__update_elem().
Note: validate_map_op() in libbpf.c emits warning
libbpf: map '__augmented_syscalls__': \
unexpected key size 2 provided, expected 4
when key size is set to int16_t.
Therefore change to variable size back to 4 bytes for
invocation of bpf_map__update_elem().
Output after:
# ./perf test 100
100: perf trace BTF general tests : Ok
#
Fixes: c760174401f6 ("perf cpumap: Reduce cpu size from int to int16_t")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Howard Chu <howardchu95@gmail.com>
Cc: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250324152756.3879571-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The test_rss_context_dump() test assumes the indirection table is always
supported, which is not true for all drivers, e.g., virtio_net when
VIRTIO_NET_F_RSS is disabled.
Skip the check if 'indir' is not present.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250318112426.386651-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add more imix_weights test cases (for incomplete input).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250317090401.1240704-2-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount namespace updates from Christian Brauner:
"This expands the ability of anonymous mount namespaces:
- Creating detached mounts from detached mounts
Currently, detached mounts can only be created from attached
mounts. This limitaton prevents various use-cases. For example, the
ability to mount a subdirectory without ever having to make the
whole filesystem visible first.
The current permission modelis:
(1) Check that the caller is privileged over the owning user
namespace of it's current mount namespace.
(2) Check that the caller is located in the mount namespace of the
mount it wants to create a detached copy of.
While it is not strictly necessary to do it this way it is
consistently applied in the new mount api. This model will also be
used when allowing the creation of detached mount from another
detached mount.
The (1) requirement can simply be met by performing the same check
as for the non-detached case, i.e., verify that the caller is
privileged over its current mount namespace.
To meet the (2) requirement it must be possible to infer the origin
mount namespace that the anonymous mount namespace of the detached
mount was created from.
The origin mount namespace of an anonymous mount is the mount
namespace that the mounts that were copied into the anonymous mount
namespace originate from.
In order to check the origin mount namespace of an anonymous mount
namespace the sequence number of the original mount namespace is
recorded in the anonymous mount namespace.
With this in place it is possible to perform an equivalent check
(2') to (2). The origin mount namespace of the anonymous mount
namespace must be the same as the caller's mount namespace. To
establish this the sequence number of the caller's mount namespace
and the origin sequence number of the anonymous mount namespace are
compared.
The caller is always located in a non-anonymous mount namespace
since anonymous mount namespaces cannot be setns()ed into. The
caller's mount namespace will thus always have a valid sequence
number.
The owning namespace of any mount namespace, anonymous or
non-anonymous, can never change. A mount attached to a
non-anonymous mount namespace can never change mount namespace.
If the sequence number of the non-anonymous mount namespace and the
origin sequence number of the anonymous mount namespace match, the
owning namespaces must match as well.
Hence, the capability check on the owning namespace of the caller's
mount namespace ensures that the caller has the ability to copy the
mount tree.
- Allow mount detached mounts on detached mounts
Currently, detached mounts can only be mounted onto attached
mounts. This limitation makes it impossible to assemble a new
private rootfs and move it into place. Instead, a detached tree
must be created, attached, then mounted open and then either moved
or detached again. Lift this restriction.
In order to allow mounting detached mounts onto other detached
mounts the same permission model used for creating detached mounts
from detached mounts can be used (cf. above).
Allowing to mount detached mounts onto detached mounts leaves three
cases to consider:
(1) The source mount is an attached mount and the target mount is
a detached mount. This would be equivalent to moving a mount
between different mount namespaces. A caller could move an
attached mount to a detached mount. The detached mount can now
be freely attached to any mount namespace. This changes the
current delegatioh model significantly for no good reason. So
this will fail.
(2) Anonymous mount namespaces are always attached fully, i.e., it
is not possible to only attach a subtree of an anoymous mount
namespace. This simplifies the implementation and reasoning.
Consequently, if the anonymous mount namespace of the source
detached mount and the target detached mount are the identical
the mount request will fail.
(3) The source mount's anonymous mount namespace is different from
the target mount's anonymous mount namespace.
In this case the source anonymous mount namespace of the
source mount tree must be freed after its mounts have been
moved to the target anonymous mount namespace. The source
anonymous mount namespace must be empty afterwards.
By allowing to mount detached mounts onto detached mounts a caller
may do the following:
fd_tree1 = open_tree(-EBADF, "/mnt", OPEN_TREE_CLONE)
fd_tree2 = open_tree(-EBADF, "/tmp", OPEN_TREE_CLONE)
fd_tree1 and fd_tree2 refer to two different detached mount trees
that belong to two different anonymous mount namespace.
It is important to note that fd_tree1 and fd_tree2 both refer to
the root of their respective anonymous mount namespaces.
By allowing to mount detached mounts onto detached mounts the
caller may now do:
move_mount(fd_tree1, "", fd_tree2, "",
MOVE_MOUNT_F_EMPTY_PATH | MOVE_MOUNT_T_EMPTY_PATH)
This will cause the detached mount referred to by fd_tree1 to be
mounted on top of the detached mount referred to by fd_tree2.
Thus, the detached mount fd_tree1 is moved from its separate
anonymous mount namespace into fd_tree2's anonymous mount
namespace.
It also means that while fd_tree2 continues to refer to the root of
its respective anonymous mount namespace fd_tree1 doesn't anymore.
This has the consequence that only fd_tree2 can be moved to another
anonymous or non-anonymous mount namespace. Moving fd_tree1 will
now fail as fd_tree1 doesn't refer to the root of an anoymous mount
namespace anymore.
Now fd_tree1 and fd_tree2 refer to separate detached mount trees
referring to the same anonymous mount namespace.
This is conceptually fine. The new mount api does allow for this to
happen already via:
mount -t tmpfs tmpfs /mnt
mkdir -p /mnt/A
mount -t tmpfs tmpfs /mnt/A
fd_tree3 = open_tree(-EBADF, "/mnt", OPEN_TREE_CLONE | AT_RECURSIVE)
fd_tree4 = open_tree(-EBADF, "/mnt/A", 0)
Both fd_tree3 and fd_tree4 refer to two different detached mount
trees but both detached mount trees refer to the same anonymous
mount namespace. An as with fd_tree1 and fd_tree2, only fd_tree3
may be moved another mount namespace as fd_tree3 refers to the root
of the anonymous mount namespace just while fd_tree4 doesn't.
However, there's an important difference between the
fd_tree3/fd_tree4 and the fd_tree1/fd_tree2 example.
Closing fd_tree4 and releasing the respective struct file will have
no further effect on fd_tree3's detached mount tree.
However, closing fd_tree3 will cause the mount tree and the
respective anonymous mount namespace to be destroyed causing the
detached mount tree of fd_tree4 to be invalid for further mounting.
By allowing to mount detached mounts on detached mounts as in the
fd_tree1/fd_tree2 example both struct files will affect each other.
Both fd_tree1 and fd_tree2 refer to struct files that have
FMODE_NEED_UNMOUNT set.
To handle this we use the fact that @fd_tree1 will have a parent
mount once it has been attached to @fd_tree2.
When dissolve_on_fput() is called the mount that has been passed in
will refer to the root of the anonymous mount namespace. If it
doesn't it would mean that mounts are leaked. So before allowing to
mount detached mounts onto detached mounts this would be a bug.
Now that detached mounts can be mounted onto detached mounts it
just means that the mount has been attached to another anonymous
mount namespace and thus dissolve_on_fput() must not unmount the
mount tree or free the anonymous mount namespace as the file
referring to the root of the namespace hasn't been closed yet.
If it had been closed yet it would be obvious because the mount
namespace would be NULL, i.e., the @fd_tree1 would have already
been unmounted. If @fd_tree1 hasn't been unmounted yet and has a
parent mount it is safe to skip any cleanup as closing @fd_tree2
will take care of all cleanup operations.
- Allow mount propagation for detached mount trees
In commit ee2e3f50629f ("mount: fix mounting of detached mounts
onto targets that reside on shared mounts") I fixed a bug where
propagating the source mount tree of an anonymous mount namespace
into a target mount tree of a non-anonymous mount namespace could
be used to trigger an integer overflow in the non-anonymous mount
namespace causing any new mounts to fail.
The cause of this was that the propagation algorithm was unable to
recognize mounts from the source mount tree that were already
propagated into the target mount tree and then reappeared as
propagation targets when walking the destination propagation mount
tree.
When fixing this I disabled mount propagation into anonymous mount
namespaces. Make it possible for anonymous mount namespace to
receive mount propagation events correctly. This is now also a
correctness issue now that we allow mounting detached mount trees
onto detached mount trees.
Mark the source anonymous mount namespace with MNTNS_PROPAGATING
indicating that all mounts belonging to this mount namespace are
currently in the process of being propagated and make the
propagation algorithm discard those if they appear as propagation
targets"
* tag 'vfs-6.15-rc1.mount.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
selftests: test subdirectory mounting
selftests: add test for detached mount tree propagation
fs: namespace: fix uninitialized variable use
mount: handle mount propagation for detached mount trees
fs: allow creating detached mounts from fsmount() file descriptors
selftests: seventh test for mounting detached mounts onto detached mounts
selftests: sixth test for mounting detached mounts onto detached mounts
selftests: fifth test for mounting detached mounts onto detached mounts
selftests: fourth test for mounting detached mounts onto detached mounts
selftests: third test for mounting detached mounts onto detached mounts
selftests: second test for mounting detached mounts onto detached mounts
selftests: first test for mounting detached mounts onto detached mounts
fs: mount detached mounts onto detached mounts
fs: support getname_maybe_null() in move_mount()
selftests: create detached mounts from detached mounts
fs: create detached mounts from detached mounts
fs: add may_copy_tree()
fs: add fastpath for dissolve_on_fput()
fs: add assert for move_mount()
fs: add mnt_ns_empty() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs nsfs updates from Christian Brauner:
"This contains non-urgent fixes for nsfs to validate ioctls before
performing any relevant operations.
We alredy did this for a few other filesystems last cycle"
* tag 'vfs-6.15-rc1.nsfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/nsfs: add ioctl validation tests
nsfs: validate ioctls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs overlayfs updates from Christian Brauner:
"Currently overlayfs uses the mounter's credentials for its
override_creds() calls. That provides a consistent permission model.
This patches allows a caller to instruct overlayfs to use its
credentials instead. The caller must be located in the same user
namespace hierarchy as the user namespace the overlayfs instance will
be mounted in. This provides a consistent and simple security model.
With this it is possible to e.g., mount an overlayfs instance where
the mounter must have CAP_SYS_ADMIN but the credentials used for
override_creds() have dropped CAP_SYS_ADMIN. It also allows the usage
of custom fs{g,u}id different from the callers and other tweaks"
* tag 'vfs-6.15-rc1.overlayfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/ovl: add third selftest for "override_creds"
selftests/ovl: add second selftest for "override_creds"
selftests/filesystems: add utils.{c,h}
selftests/ovl: add first selftest for "override_creds"
ovl: allow to specify override credentials
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pidfs updates from Christian Brauner:
- Allow retrieving exit information after a process has been reaped
through pidfds via the new PIDFD_INTO_EXIT extension for the
PIDFD_GET_INFO ioctl. Various tools need access to information about
a process/task even after it has already been reaped.
Pidfd polling allows waiting on either task exit or for a task to
have been reaped. The contract for PIDFD_INFO_EXIT is simply that
EPOLLHUP must be observed before exit information can be retrieved,
i.e., exit information is only provided once the task has been reaped
and then can be retrieved as long as the pidfd is open.
- Add PIDFD_SELF_{THREAD,THREAD_GROUP} sentinels allowing userspace to
forgo allocating a file descriptor for their own process. This is
useful in scenarios where users want to act on their own process
through pidfds and is akin to AT_FDCWD.
- Improve premature thread-group leader and subthread exec behavior
when polling on pidfds:
(1) During a multi-threaded exec by a subthread, i.e.,
non-thread-group leader thread, all other threads in the
thread-group including the thread-group leader are killed and the
struct pid of the thread-group leader will be taken over by the
subthread that called exec. IOW, two tasks change their TIDs.
(2) A premature thread-group leader exit means that the thread-group
leader exited before all of the other subthreads in the
thread-group have exited.
Both cases lead to inconsistencies for pidfd polling with
PIDFD_THREAD. Any caller that holds a PIDFD_THREAD pidfd to the
current thread-group leader may or may not see an exit notification
on the file descriptor depending on when poll is performed. If the
poll is performed before the exec of the subthread has concluded an
exit notification is generated for the old thread-group leader. If
the poll is performed after the exec of the subthread has concluded
no exit notification is generated for the old thread-group leader.
The correct behavior is to simply not generate an exit notification
on the struct pid of a subhthread exec because the struct pid is
taken over by the subthread and thus remains alive.
But this is difficult to handle because a thread-group may exit
premature as mentioned in (2). In that case an exit notification is
reliably generated but the subthreads may continue to run for an
indeterminate amount of time and thus also may exec at some point.
After this pull no exit notifications will be generated for a
PIDFD_THREAD pidfd for a thread-group leader until all subthreads
have been reaped. If a subthread should exec before no exit
notification will be generated until that task exits or it creates
subthreads and repeates the cycle.
This means an exit notification indicates the ability for the father
to reap the child.
* tag 'vfs-6.15-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
selftests/pidfd: third test for multi-threaded exec polling
selftests/pidfd: second test for multi-threaded exec polling
selftests/pidfd: first test for multi-threaded exec polling
pidfs: improve multi-threaded exec and premature thread-group leader exit polling
pidfs: ensure that PIDFS_INFO_EXIT is available
selftests/pidfd: add seventh PIDFD_INFO_EXIT selftest
selftests/pidfd: add sixth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fifth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fourth PIDFD_INFO_EXIT selftest
selftests/pidfd: add third PIDFD_INFO_EXIT selftest
selftests/pidfd: add second PIDFD_INFO_EXIT selftest
selftests/pidfd: add first PIDFD_INFO_EXIT selftest
selftests/pidfd: expand common pidfd header
pidfs/selftests: ensure correct headers for ioctl handling
selftests/pidfd: fix header inclusion
pidfs: allow to retrieve exit information
pidfs: record exit code and cgroupid at exit
pidfs: use private inode slab cache
pidfs: move setting flags into pidfs_alloc_file()
pidfd: rely on automatic cleanup in __pidfd_prepare()
...
|
|
Annotate so it is built with non-executable stack.
Fixes: 8b97519711c3 ("perf test: Add asm pureloop test tool")
Signed-off-by: Marcus Meissner <meissner@suse.de>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250323085410.23751-1-meissner@suse.de
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
getenv may return None, so assert it isn't None for CC and srctree
environmental variables required for the script.
Disable an optional warning related to Popen.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
ConfigParser existed in python2 but not in python3 causing mypy to
fail.
Whilst removing a python2 workaround remove reference to __future__.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If PYLINT=1 is passed to the build then run pylint over python code in
perf. Unlike shellcheck this isn't default on as there are currently
too many errors.
An example of an error:
```
************* Module setup
util/setup.py:19:0: C0301: Line too long (127/100) (line-too-long)
util/setup.py:20:0: C0301: Line too long (138/100) (line-too-long)
util/setup.py:63:0: C0301: Line too long (106/100) (line-too-long)
util/setup.py:1:0: C0114: Missing module docstring (missing-module-docstring)
util/setup.py:24:4: W0622: Redefining built-in 'vars' (redefined-builtin)
util/setup.py:11:4: C0103: Constant name "cc_options" doesn't conform to UPPER_CASE naming style (invalid-name)
util/setup.py:13:4: C0103: Constant name "cc_options" doesn't conform to UPPER_CASE naming style (invalid-name)
util/setup.py:15:34: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
util/setup.py:18:0: C0116: Missing function or method docstring (missing-function-docstring)
util/setup.py:19:16: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
util/setup.py:44:0: C0413: Import "from setuptools import setup, Extension" should be placed at the top of the module (wrong-import-position)
util/setup.py:46:0: C0413: Import "from setuptools.command.build_ext import build_ext as _build_ext" should be placed at the top of the module (wrong-import-position)
util/setup.py:47:0: C0413: Import "from setuptools.command.install_lib import install_lib as _install_lib" should be placed at the top of the module (wrong-import-position)
util/setup.py:49:0: C0115: Missing class docstring (missing-class-docstring)
util/setup.py:49:0: C0103: Class name "build_ext" doesn't conform to PascalCase naming style (invalid-name)
util/setup.py:52:8: W0201: Attribute 'build_lib' defined outside __init__ (attribute-defined-outside-init)
util/setup.py:53:8: W0201: Attribute 'build_temp' defined outside __init__ (attribute-defined-outside-init)
util/setup.py:55:0: C0115: Missing class docstring (missing-class-docstring)
util/setup.py:55:0: C0103: Class name "install_lib" doesn't conform to PascalCase naming style (invalid-name)
util/setup.py:58:8: W0201: Attribute 'build_dir' defined outside __init__ (attribute-defined-outside-init)
*-----------------------------------------------------------------
Your code has been rated at 6.67/10 (previous run: 6.51/10, +0.16)
make[4]: *** [util/Build:442: util/setup.py.pylint_log] Error 1
```
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If MYPY=1 is passed to the build then run mypy over python code in
perf. Unlike shellcheck this isn't default on as there are currently
too many errors.
An example of an error:
```
util/setup.py:8: error: Item "None" of "str | None" has no attribute "split" [union-attr]
util/setup.py:15: error: Item "None" of "IO[bytes] | None" has no attribute "readline" [union-attr]
util/setup.py:15: error: List item 0 has incompatible type "str | None"; expected "str | bytes | PathLike[str] | PathLike[bytes]" [list-item]
util/setup.py:16: error: Unsupported left operand type for + ("None") [operator]
util/setup.py:16: note: Left operand is of type "str | None"
util/setup.py:74: error: Unsupported left operand type for + ("None") [operator]
util/setup.py:74: note: Left operand is of type "str | None"
Found 5 errors in 1 file (checked 1 source file)
make[4]: *** [util/Build:430: util/setup.py.mypy_log] Error 1
```
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Rename TEST_LOGS to SHELL_TEST_LOGS as later changes will add more
kinds of test logs.
Minor comment tweak in Makefile.perf as more than just test shell
tests are checked.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Separate test log files from object files. Depend on test log output
but don't pass to the linker.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Mount notifications
The day has come where we finally provide a new api to listen for
mount topology changes outside of /proc/<pid>/mountinfo. A mount
namespace file descriptor can be supplied and registered with
fanotify to listen for mount topology changes.
Currently notifications for mount, umount and moving mounts are
generated. The generated notification record contains the unique
mount id of the mount.
The listmount() and statmount() api can be used to query detailed
information about the mount using the received unique mount id.
This allows userspace to figure out exactly how the mount topology
changed without having to generating diffs of /proc/<pid>/mountinfo
in userspace.
- Support O_PATH file descriptors with FSCONFIG_SET_FD in the new mount
api
- Support detached mounts in overlayfs
Since last cycle we support specifying overlayfs layers via file
descriptors. However, we don't allow detached mounts which means
userspace cannot user file descriptors received via
open_tree(OPEN_TREE_CLONE) and fsmount() directly. They have to
attach them to a mount namespace via move_mount() first.
This is cumbersome and means they have to undo mounts via umount().
Allow them to directly use detached mounts.
- Allow to retrieve idmappings with statmount
Currently it isn't possible to figure out what idmapping has been
attached to an idmapped mount. Add an extension to statmount() which
allows to read the idmapping from the mount.
- Allow creating idmapped mounts from mounts that are already idmapped
So far it isn't possible to allow the creation of idmapped mounts
from already idmapped mounts as this has significant lifetime
implications. Make the creation of idmapped mounts atomic by allow to
pass struct mount_attr together with the open_tree_attr() system call
allowing to solve these issues without complicating VFS lookup in any
way.
The system call has in general the benefit that creating a detached
mount and applying mount attributes to it becomes an atomic operation
for userspace.
- Add a way to query statmount() for supported options
Allow userspace to query which mount information can be retrieved
through statmount().
- Allow superblock owners to force unmount
* tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
umount: Allow superblock owners to force umount
selftests: add tests for mount notification
selinux: add FILE__WATCH_MOUNTNS
samples/vfs: fix printf format string for size_t
fs: allow changing idmappings
fs: add kflags member to struct mount_kattr
fs: add open_tree_attr()
fs: add copy_mount_setattr() helper
fs: add vfs_open_tree() helper
statmount: add a new supported_mask field
samples/vfs: add STATMOUNT_MNT_{G,U}IDMAP
selftests: add tests for using detached mount with overlayfs
samples/vfs: check whether flag was raised
statmount: allow to retrieve idmappings
uidgid: add map_id_range_up()
fs: allow detached mounts in clone_private_mount()
selftests/overlayfs: test specifying layers as O_PATH file descriptors
fs: support O_PATH fds with FSCONFIG_SET_FD
vfs: add notifications for mount attach and detach
fanotify: notify on mount attach and detach
...
|
|
The function worker_thread() is programmed in a way that roughly
doubles the number of expectable context switches, because it enforces
blocking reads:
Performance counter stats for 'perf bench sched pipe':
2,000,004 context-switches
11.859548321 seconds time elapsed
0.674871000 seconds user
8.076890000 seconds sys
The result of this behavior is that the blocking reads by far dominate
the performance analysis of 'perf bench sched pipe':
Samples: 78K of event 'cycles:P', Event count (approx.): 27964965844
Overhead Command Shared Object Symbol
25.28% sched-pipe [kernel.kallsyms] [k] read_hpet
8.11% sched-pipe [kernel.kallsyms] [k] retbleed_untrain_ret
2.82% sched-pipe [kernel.kallsyms] [k] pipe_write
From the code, it is unclear if that behavior is wanted but the log
says that at least Ingo Molnar aims to mimic lmbench's lat_ctx, that
doesn't handle the pipe ends that way
(https://sourceforge.net/p/lmbench/code/HEAD/tree/trunk/lmbench2/src/lat_ctx.c)
Fix worker_thread() by always first feeding the write ends of the pipes
and then trying to read.
This roughly halves the context switches and runtime of pure
'perf bench sched pipe':
Performance counter stats for 'perf bench sched pipe':
1,005,770 context-switches
6.033448041 seconds time elapsed
0.423142000 seconds user
4.519829000 seconds sys
And the blocking reads do no longer dominate the analysis at the above
extreme:
Samples: 40K of event 'cycles:P', Event count (approx.): 14309364879
Overhead Command Shared Object Symbol
12.20% sched-pipe [kernel.kallsyms] [k] read_hpet
9.23% sched-pipe [kernel.kallsyms] [k] retbleed_untrain_ret
3.68% sched-pipe [kernel.kallsyms] [k] pipe_write
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250323140316.19027-2-dirk@gouders.net
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Commit 54f9aa1092457 ("tools/perf/powerpc/util: Add support to
handle compatible mode PVR for perf json events") introduced
to select proper JSON events in case of compat mode using
auxiliary vector. But this caused a compilation error in ppc64
Big Endian.
arch/powerpc/util/header.c: In function 'is_compat_mode':
arch/powerpc/util/header.c:20:21: error: cast to pointer from
integer of different size [-Werror=int-to-pointer-cast]
20 | if (!strcmp((char *)platform, (char *)base_platform))
| ^
arch/powerpc/util/header.c:20:39: error: cast to pointer from
integer of different size [-Werror=int-to-pointer-cast]
20 | if (!strcmp((char *)platform, (char *)base_platform))
|
Commit saved the getauxval(AT_BASE_PLATFORM) and getauxval(AT_PLATFORM)
return values in u64 which causes the compilation error.
Patch fixes this issue by changing u64 to "unsigned long".
Fixes: 54f9aa1092457 ("tools/perf/powerpc/util: Add support to handle compatible mode PVR for perf json events")
Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20250321100726.699956-1-likhitha@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When enabling the libperl feature the build uses perl's build flags
(ccopts) but filters out various flags, e.g. for LTO.
While this is conceptually correct, it is insufficient in practice,
since only "-flto=auto" is filtered out. When perl itself is built with
"-flto" this can cause parts of perf being built with LTO and others
without, giving exciting build errors like e.g.:
../tools/perf/pmu-events/pmu-events.c:72851:(.text+0xb79): undefined
reference to `strcmp_cpuid_str' collect2: error: ld returned 1 exit status
Fix this by filtering all matching flag values of -flto{=n,auto,..}.
Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Link: https://lore.kernel.org/r/20250321082038.27901-2-holger@applied-asynchrony.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add ublk stripe target which can take 1~4 underlying backing files
or block device, with stripe size 4k ~ 512K.
Add two basic tests(write verify & mkfs/mount/umount) over ublk/stripe.
This target is helpful to cover multiple IOs aiming at same
fixed/registered IO kernel buffer.
It is also capable of verifying vectored registered (kernel)buffers
in future for zero copy, so far it isn't supported yet.
Todo: support vectored registered kernel buffer for ublk/zc.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the added target io handling helpers for simplifying loop io
completion.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Enable zero copy for null target so that we can evaluate performance
from zero copy or not.
Also this should be the simplest ublk zero copy implementation, which
can be served as zc example.
Add test for covering 'add -t null -z'.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
- pass 'truct dev_ctx *ctx' to target init function
- add 'private_data' to 'struct ublk_dev' for storing target specific data
- add 'private_data' to 'struct ublk_io' for storing per-IO data
- add 'tgt_ios' to 'struct ublk_io' for counting how many io_uring ios
for handling the current io command
- add helper ublk_get_io() for supporting stripe target
- add two helpers for simplifying target io handling
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move two functions for initializing & de-initializing backing file
into common.c.
Also move one common helper into kublk.h.
Prepare for supporting ublk-stripe.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Increase max buffer size to 1MB, and 64KB is too small to evaluate
performance with builtin ublk server implementation.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unify the sqe allocator helper, and we will use it for supporting
more cases, such as ublk stripe, in which variable sqe allocation
is required.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
block layer, ublk and io_uring might re-order IO in the past
- plug
- queue ublk io command via task work
Add one test for verifying if sequential WRITE IO is dispatched in order.
- null target is taken, so we can just observe io order from
`tracepoint:block:block_rq_complete` which represents the dispatch order
- WRITE IO is taken because READ may come from system-wide utility
Cc: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
number is invalid
syzbot reported out-of-bounds read in check_atomic_load/store() when the
register number is invalid in this context:
https://syzkaller.appspot.com/bug?extid=a5964227adc0f904549c
To avoid the issue from now on, let's add tests where the register number
is invalid for load-acquire/store-release.
After discussion with Eduard, I decided to use R15 as invalid register
because the actual slab-out-of-bounds read issue occurs when the register
number is R12 or larger.
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250322045340.18010-6-enjuk@amazon.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
syzbot reported the following splat [0].
In check_atomic_load/store(), register validity is not checked before
atomic_ptr_type_ok(). This causes the out-of-bounds read in is_ctx_reg()
called from atomic_ptr_type_ok() when the register number is MAX_BPF_REG
or greater.
Call check_load_mem()/check_store_reg() before atomic_ptr_type_ok()
to avoid the OOB read.
However, some tests introduced by commit ff3afe5da998 ("selftests/bpf: Add
selftests for load-acquire and store-release instructions") assume
calling atomic_ptr_type_ok() before checking register validity.
Therefore the swapping of order unintentionally changes verifier messages
of these tests.
For example in the test load_acquire_from_pkt_pointer(), expected message
is 'BPF_ATOMIC loads from R2 pkt is not allowed' although actual messages
are different.
validate_msgs:FAIL:754 expect_msg
VERIFIER LOG:
=============
Global function load_acquire_from_pkt_pointer() doesn't return scalar. Only those are supported.
0: R1=ctx() R10=fp0
; asm volatile ( @ verifier_load_acquire.c:140
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx() R2_w=pkt(r=0)
1: (d3) r0 = load_acquire((u8 *)(r2 +0))
invalid access to packet, off=0 size=1, R2(id=0,off=0,r=0)
R2 offset is outside of the packet
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
=============
EXPECTED SUBSTR: 'BPF_ATOMIC loads from R2 pkt is not allowed'
#505/19 verifier_load_acquire/load-acquire from pkt pointer:FAIL
This is because instructions in the test don't pass check_load_mem() and
therefore don't enter the atomic_ptr_type_ok() path.
In this case, we have to modify instructions so that they pass the
check_load_mem() and trigger atomic_ptr_type_ok().
Similarly for store-release tests, we need to modify instructions so that
they pass check_store_reg().
Like load_acquire_from_pkt_pointer(), modify instructions in:
load_acquire_from_sock_pointer()
store_release_to_ctx_pointer()
store_release_to_pkt_pointer()
Also in store_release_to_sock_pointer(), check_store_reg() returns error
early and atomic_ptr_type_ok() is not triggered, since write to sock
pointer is not possible in general.
We might be able to remove the test, but for now let's leave it and just
change the expected message.
[0]
BUG: KASAN: slab-out-of-bounds in is_ctx_reg kernel/bpf/verifier.c:6185 [inline]
BUG: KASAN: slab-out-of-bounds in atomic_ptr_type_ok+0x3d7/0x550 kernel/bpf/verifier.c:6223
Read of size 4 at addr ffff888141b0d690 by task syz-executor143/5842
CPU: 1 UID: 0 PID: 5842 Comm: syz-executor143 Not tainted 6.14.0-rc3-syzkaller-gf28214603dc6 #0
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0x16e/0x5b0 mm/kasan/report.c:521
kasan_report+0x143/0x180 mm/kasan/report.c:634
is_ctx_reg kernel/bpf/verifier.c:6185 [inline]
atomic_ptr_type_ok+0x3d7/0x550 kernel/bpf/verifier.c:6223
check_atomic_store kernel/bpf/verifier.c:7804 [inline]
check_atomic kernel/bpf/verifier.c:7841 [inline]
do_check+0x89dd/0xedd0 kernel/bpf/verifier.c:19334
do_check_common+0x1678/0x2080 kernel/bpf/verifier.c:22600
do_check_main kernel/bpf/verifier.c:22691 [inline]
bpf_check+0x165c8/0x1cca0 kernel/bpf/verifier.c:23821
Reported-by: syzbot+a5964227adc0f904549c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a5964227adc0f904549c
Tested-by: syzbot+a5964227adc0f904549c@syzkaller.appspotmail.com
Fixes: e24bbad29a8d ("bpf: Introduce load-acquire and store-release instructions")
Fixes: ff3afe5da998 ("selftests/bpf: Add selftests for load-acquire and store-release instructions")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250322045340.18010-5-enjuk@amazon.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
create_pagecache_thp_and_fd() was previously writing a file sized at twice
the PMD size by making a per-byte write syscall. This was quite slow when
the PMD size is 4M, but completely intolerable for 32M (PMD size for
arm64's 16K page size), and 512M (PMD size for arm64's 64K page size).
The byte pattern has a 256 byte period, so let's create a 1K buffer and
fill it with exactly 4 periods. Then we can write the buffer as many
times as is required to fill the file. This makes things much more
tolerable.
The test now passes for 16K page size. It still fails for 64K page size
because MAX_PAGECACHE_ORDER is too small for 512M folio size (I think).
Link: https://lkml.kernel.org/r/20250318174343.243631-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
uffd-unit-tests uses a memory area with a fixed 32M size. Then it
calculates the number of pages by dividing by page_size, which itself is
either the base page size or the PMD huge page size depending on the test
config. For the latter, we end up with nr_pages=1 for arm64 16K base
pages, and nr_pages=0 for 64K base pages. This doesn't end well.
So let's make the 32M size a floor and also ensure that we have at least 2
pages given the PMD size. With this change, the tests pass on arm64 64K
base page size configuration.
Link: https://lkml.kernel.org/r/20250318174343.243631-2-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As discussed here:
https://lore.kernel.org/lkml/Z9RRkL1hom48z3Tt@google.com/
This code could benefit from some more commentary.
To avoid needing to comment the same thing in multiple places (I guess
more of these SKIPs will need to be added over time, for now I am only
like 20% of the way through Project Run run_vmtests.sh Successfully), add
a dummy "skip tests for this specific reason" function that basically just
serves as a hook to hang comments on.
Link: https://lkml.kernel.org/r/20250317-9pfs-comments-v1-1-9ac96043e146@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When statically linking symbols can be replaced with those from other
statically linked libraries depending on the link order and the hoped
for "multiple definition" error may not appear. To avoid conflicts it
is good practice to namespace symbols, this change renames errstr to
libbpf_errstr. To avoid churn a #define is used to turn use of
errstr(err) to libbpf_errstr(err).
Fixes: 1633a83bf993 ("libbpf: Introduce errstr() for stringifying errno")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250320222439.1350187-1-irogers@google.com
|
|
Firstly ublk char device node may not be created by udev yet, so wait
a while until it can be opened or timeout.
Secondly delete created ublk device in case of start failure, otherwise
the device becomes zombie.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250321135324.259677-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Lei Chen reported a bug with CLOCK_MONOTONIC_COARSE having inconsistencies
when NTP is adjusting the clock frequency.
This has gone seemingly undetected for ~15 years, illustrating a clear gap
in our testing.
The skew_consistency test is intended to catch this sort of problem, but
was focused on only evaluating CLOCK_MONOTONIC, and thus missed the problem
on CLOCK_MONOTONIC_COARSE.
So adjust the test to run with all clockids for 60 seconds each instead of
10 minutes with just CLOCK_MONOTONIC.
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250320200306.1712599-2-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
|
|
Expands the self-tests to include the 'release' feature in
sysdata.
Verifies that enabling the 'release' feature appends the
correct data and ensures that disabling it functions as expected.
When enabled, the message should have an item similar to in the
userdata: `release=$(uname -r)`
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-5-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some fixes may require user space to check if they are applied on the
running kernel before using a specific feature. For instance, this
applies when a restriction was previously too restrictive and is now
getting relaxed (e.g. for compatibility reasons). However, non-visible
changes for legitimate use (e.g. security fixes) do not require an
erratum.
Because fixes are backported down to a specific Landlock ABI, we need a
way to avoid cherry-pick conflicts. The solution is to only update a
file related to the lower ABI impacted by this issue. All the ABI files
are then used to create a bitmask of fixes.
The new errata interface is similar to the one used to get the supported
Landlock ABI version, but it returns a bitmask instead because the order
of fixes may not match the order of versions, and not all fixes may
apply to all versions.
The actual errata will come with dedicated commits. The description is
not actually used in the code but serves as documentation.
Create the landlock_abi_version symbol and use its value to check errata
consistency.
Update test_base's create_ruleset_checks_ordering tests and add errata
tests.
This commit is backportable down to the first version of Landlock.
Fixes: 3532b0b4352c ("landlock: Enable user space to infer supported features")
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
All implementations of chacha_init_arch() just call
chacha_init_generic(), so it is pointless. Just delete it, and replace
chacha_init() with what was previously chacha_init_generic().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
frontend_bound metrics was miscalculated due to different scaling in
a couple of metrics it depends on. Change the scaling to match with
AmpereOne.
Fixes: 16438b652b46 ("perf vendor events arm64 AmpereOneX: Add core PMU events and metrics")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250313201559.11332-3-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
errata
Atomic instructions are both memory-reading and memory-writing
instructions and so should be counted by both LD_RETIRED and ST_RETIRED
performance monitoring events. However LD_RETIRED does not count atomic
instructions.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250313201559.11332-2-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Leak sanitizer was reporting a memory leak in the "perf record and
replay" test. Add evlist__delete to trace__exit, also ensure
trace__exit is called after trace__record.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-15-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add missing btf__free in trace__exit.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-14-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Namhyung fixed the syscall table being reallocated and moving by
reloading the system call pointer after a move:
https://lore.kernel.org/lkml/Z9YHCzINiu4uBQ8B@google.com/
This could be brittle so this patch changes the syscall table to be an
array of pointers of "struct syscall" that don't move. Remove
unnecessary copies and searches with this change.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-13-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Arnd Bergmann described that MIPS system calls don't necessarily start
from 0 as an ABI prefix is applied:
https://lore.kernel.org/lkml/8ed7dfb2-1e4d-4aa4-a04b-0397a89365d1@app.fastmail.com/
When decoding the "id" (aka system call number) for MIPS ignore values
greater-than 1000.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-12-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Now a single beauty file is generated and used by all architectures,
remove the per-architecture Makefiles, Kbuild files and previous
generator script.
Note: there was conversation with Charlie Jenkins
<charlie@rivosinc.com> and they'd written an alternate approach to
support multiple architectures:
https://lore.kernel.org/all/20250114-perf_syscall_arch_runtime-v1-1-5b304e408e11@rivosinc.com/
It would have been better to have helped Charlie fix their series (my
apologies) but they agreed that the approach taken here was likely
best for longer term maintainability:
https://lore.kernel.org/lkml/Z6Jk_UN9i69QGqUj@ghost/
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Switch to use the lookup table containing all architectures rather
than tables matching the perf binary.
This fixes perf trace when executed on a 32-bit i386 binary on an
x86-64 machine. Note in the following the system call names of the
32-bit i386 binary as seen by an x86-64 perf.
Before:
```
? ( ): a.out/447296 ... [continued]: munmap()) = 0
0.024 ( 0.001 ms): a.out/447296 recvfrom(ubuf: 0x2, size: 4160585708, flags: DONTROUTE|CTRUNC|TRUNC|DONTWAIT|EOR|WAITALL|FIN|SYN|CONFIRM|RST|ERRQUEUE|NOSIGNAL|WAITFORONE|BATCH|SOCK_DEVMEM|ZEROCOPY|FASTOPEN|CMSG_CLOEXEC|0x91f80000, addr: 0xe30, addr_len: 0xffce438c) = 1475198976
0.042 ( 0.003 ms): a.out/447296 lgetxattr(name: "", value: 0x3, size: 34) = 4160344064
0.054 ( 0.003 ms): a.out/447296 dup2(oldfd: -134422744, newfd: 4) = -1 ENOENT (No such file or directory)
0.060 ( 0.009 ms): a.out/447296 preadv(fd: 4294967196, vec: (struct iovec){.iov_base = (void *)0x2e646c2f6374652f,.iov_len = (__kernel_size_t)7307199665335594867,}, vlen: 557056, pos_h: 4160585708) = 3
0.074 ( 0.004 ms): a.out/447296 lgetxattr(name: "", value: 0x1, size: 2) = 4160237568
0.080 ( 0.001 ms): a.out/447296 lstat(filename: "", statbuf: 0x193f6) = 0
0.089 ( 0.007 ms): a.out/447296 preadv(fd: 4294967196, vec: (struct iovec){.iov_base = (void *)0x3833692f62696c2f,.iov_len = (__kernel_size_t)3276497845987585334,}, vlen: 557056, pos_h: 4160585708) = 3
0.097 ( 0.002 ms): a.out/447296 close(fd: 3</proc/447296/status>) = 512
0.103 ( 0.002 ms): a.out/447296 lgetxattr(name: "", value: 0x1, size: 2050) = 4157935616
0.107 ( 0.007 ms): a.out/447296 lgetxattr(pathname: "", name: "", value: 0x5, size: 2066) = 4158078976
0.116 ( 0.003 ms): a.out/447296 lgetxattr(pathname: "", name: "", value: 0x1, size: 2066) = 4159639552
0.121 ( 0.003 ms): a.out/447296 lgetxattr(pathname: "", name: "", value: 0x3, size: 2066) = 4160184320
0.129 ( 0.002 ms): a.out/447296 lgetxattr(pathname: "", name: "", value: 0x3, size: 50) = 4160196608
0.138 ( 0.001 ms): a.out/447296 lstat(filename: "") = 0
0.145 ( 0.002 ms): a.out/447296 mq_timedreceive(mqdes: 4291706800, u_msg_ptr: 0xf7f9ea48, msg_len: 134616640, u_msg_prio: 0xf7fd7fec, u_abs_timeout: (struct __kernel_timespec){.tv_sec = (__kernel_time64_t)-578174027777317696,.tv_nsec = (long long int)4160349376,}) = 0
0.148 ( 0.001 ms): a.out/447296 mkdirat(dfd: -134617816, pathname: " ��� ���▒���▒���", mode: IFREG|ISUID|IRUSR|IWGRP|0xf7fd0000) = 447296
0.150 ( 0.001 ms): a.out/447296 process_vm_writev(pid: -134617812, lvec: (struct iovec){.iov_base = (void *)0xf7f9e9c8f7f9e4c0,.iov_len = (__kernel_size_t)4160349376,}, liovcnt: 4160588048, rvec: (struct iovec){}, riovcnt: 4160585708, flags: 4291707352) = 0
0.197 ( 0.004 ms): a.out/447296 capget(header: 4160184320, dataptr: 8192) = 0
0.202 ( 0.002 ms): a.out/447296 capget(header: 1448669184, dataptr: 4096) = 0
0.208 ( 0.002 ms): a.out/447296 capget(header: 4160577536, dataptr: 8192) = 0
0.220 ( 0.001 ms): a.out/447296 getxattr(pathname: "", name: "c������", value: 0xf7f77e34, size: 1) = 0
0.228 ( 0.005 ms): a.out/447296 fchmod(fd: -134729728, mode: IRUGO|IWUGO|IFREG|IFIFO|ISVTX|IXUSR|0x10000) = 0
0.240 ( 0.009 ms): a.out/447296 preadv(fd: 4294967196, vec: 0x5658e008, pos_h: 4160192052) = 3
0.250 ( 0.008 ms): a.out/447296 close(fd: 3</proc/447296/status>) = 1436
0.260 ( 0.018 ms): a.out/447296 stat(filename: "", statbuf: 0xffce32ac) = 1436
0.288 (1000.213 ms): a.out/447296 readlinkat(buf: 0xffce31d4, bufsiz: 4291703244) = 0
```
After:
```
? ( ): a.out/442930 ... [continued]: execve()) = 0
0.023 ( 0.002 ms): a.out/442930 brk() = 0x57760000
0.052 ( 0.003 ms): a.out/442930 access(filename: 0xf7f5af28, mode: R) = -1 ENOENT (No such file or directory)
0.059 ( 0.009 ms): a.out/442930 openat(dfd: CWD, filename: "/etc/ld.so.cache", flags: RDONLY|CLOEXEC|LARGEFILE) = 3
0.078 ( 0.001 ms): a.out/442930 close(fd: 3</proc/442930/status>) = 0
0.087 ( 0.007 ms): a.out/442930 openat(dfd: CWD, filename: "/lib/i386-linux-", flags: RDONLY|CLOEXEC|LARGEFILE) = 3
0.095 ( 0.002 ms): a.out/442930 read(fd: 3</proc/442930/status>, buf: 0xffbdbb70, count: 512) = 512
0.135 ( 0.001 ms): a.out/442930 close(fd: 3</proc/442930/status>) = 0
0.148 ( 0.001 ms): a.out/442930 set_tid_address(tidptr: 0xf7f2b528) = 442930 (a.out)
0.150 ( 0.001 ms): a.out/442930 set_robust_list(head: 0xf7f2b52c, len: 12) =
0.196 ( 0.004 ms): a.out/442930 mprotect(start: 0xf7f03000, len: 8192, prot: READ) = 0
0.202 ( 0.002 ms): a.out/442930 mprotect(start: 0x5658e000, len: 4096, prot: READ) = 0
0.207 ( 0.002 ms): a.out/442930 mprotect(start: 0xf7f63000, len: 8192, prot: READ) = 0
0.230 ( 0.005 ms): a.out/442930 munmap(addr: 0xf7f10000, len: 103414) = 0
0.244 ( 0.010 ms): a.out/442930 openat(dfd: CWD, filename: 0x5658d008) = 3
0.255 ( 0.007 ms): a.out/442930 read(fd: 3</proc/442930/status>, buf: 0xffbdb67c, count: 4096) = 1436
0.264 ( 0.018 ms): a.out/442930 write(fd: 1</dev/pts/4>, buf: , count: 1436) = 1436
0.292 (1000.173 ms): a.out/442930 clock_nanosleep(rqtp: { .tv_sec: 17866546940376776704, .tv_nsec: 4159878336 }, rmtp: 0xffbdb59c) = 0
1000.478 ( ): a.out/442930 exit_group() = ?
```
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Rather than generating individual syscall header files generate a
single trace/beauty/generated/syscalltbl.c. In a syscalltbls array
have references to each architectures tables along with the
corresponding e_machine. When the 32-bit or 64-bit table is ambiguous,
match the perf binary's type. For ARM32 don't use the arm64 32-bit
table which is smaller. EM_NONE is present for is no machine matches.
Conditionally compile the tables, only having the appropriate 32 and
64-bit table. If ALL_SYSCALLTBL is defined all tables can be
compiled.
Add comment for noreturn column suggested by Arnd Bergmann:
https://lore.kernel.org/lkml/d47c35dd-9c52-48e7-a00d-135572f11fbb@app.fastmail.com/
and added in commit 9142be9e6443 ("x86/syscall: Mark exit[_group]
syscall handlers __noreturn").
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
