summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2020-09-08selftests/powerpc: Don't touch VMX/VSX on older CPUsMichael Ellerman
If we're running on a CPU without VMX/VSX then don't touch them. This is fragile, the compiler could spill a VMX/VSX register and break the test anyway. But in practice it seems to work, ie. the test runs to completion on a system without VSX with this change. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819015727.1977134-8-mpe@ellerman.id.au
2020-09-08selftests/powerpc: Skip L3 bank test on older CPUsMichael Ellerman
This is a test of specific piece of logic in isa207-common.c, which is only used on Power8 or later. So skip it on older CPUs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819015727.1977134-7-mpe@ellerman.id.au
2020-09-08selftests/powerpc: Skip security tests on older CPUsMichael Ellerman
Both these tests use PMU events that only work on newer CPUs, so skip them on older CPUs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819015727.1977134-6-mpe@ellerman.id.au
2020-09-08selftests/powerpc: Don't run DSCR tests on old systemsMichael Ellerman
The DSCR tests fail on systems that don't have DSCR, so check for the DSCR in hwcap and skip if it's not present. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819015727.1977134-5-mpe@ellerman.id.au
2020-09-08selftests/powerpc: Include asm/cputable.h from utils.hMichael Ellerman
utils.h provides have_hwcap() and have_hwcap2() which check for a feature bit. Those bits are defined in asm/cputable.h, so include it in utils.h so users of utils.h don't have to do it manually. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819015727.1977134-4-mpe@ellerman.id.au
2020-09-08selftests/powerpc: Move set_dscr() into rfi_flush.cMichael Ellerman
This version of set_dscr() was added for the RFI flush test, and is fairly specific to it. It also clashes with the version of set_dscr() in dscr/dscr.h. So move it into the RFI flush test where it's used. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819015727.1977134-3-mpe@ellerman.id.au
2020-09-08selftests/powerpc: Give the bad_accesses test longer to runMichael Ellerman
On older systems this test takes longer to run (duh), give it five minutes which is long enough on a G5 970FX @ 1.6GHz. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819015727.1977134-2-mpe@ellerman.id.au
2020-09-08selftests/powerpc: Make using_hash_mmu() work on Cell & PowerMacMichael Ellerman
These platforms don't show the MMU in /proc/cpuinfo, but they always use hash, so teach using_hash_mmu() that. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819015727.1977134-1-mpe@ellerman.id.au
2020-09-08selftests/powerpc: Run tm-tmspr test for longerMichael Ellerman
This test creates some threads, which write to TM SPRs, and then makes sure the registers maintain the correct values across context switches and contention with other threads. But currently the test finishes almost instantaneously, which reduces the chance of it hitting an interesting condition. So increase the number of loops, so it runs a bit longer, though still less than 2s on a Power8. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200813013445.686464-3-mpe@ellerman.id.au
2020-09-08selftests/powerpc: Don't use setaffinity in tm-tmsprMichael Ellerman
This test tries to set affinity to CPUs that don't exist, especially if the set of online CPUs doesn't start at 0. But there's no real reason for it to use setaffinity in the first place, it's just trying to create lots of threads to cause contention. So drop the setaffinity entirely. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200813013445.686464-2-mpe@ellerman.id.au
2020-09-08selftests/powerpc: Fix TM tests when CPU 0 is offlineMichael Ellerman
Several of the TM tests fail spuriously if CPU 0 is offline, because they blindly try to affinitise to CPU 0. Fix them by picking any online CPU and using that instead. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200813013445.686464-1-mpe@ellerman.id.au
2020-09-08selftests/net: replace obsolete NFT_CHAIN configurationFabian Frederick
Replace old parameters with global NFT_NAT from commit db8ab38880e0 ("netfilter: nf_tables: merge ipv4 and ipv6 nat chain types") Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-09-07x86/insn: Make inat-tables.c suitable for pre-decompression codeJoerg Roedel
The inat-tables.c file has some arrays in it that contain pointers to other arrays. These pointers need to be relocated when the kernel image is moved to a different location. The pre-decompression boot-code has no support for applying ELF relocations, so initialize these arrays at runtime in the pre-decompression code to make sure all pointers are correctly initialized. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lkml.kernel.org/r/20200907131613.12703-8-joro@8bytes.org
2020-09-07tools, bpf: Synchronise BPF UAPI header with toolsQuentin Monnet
Synchronise the bpf.h header under tools, to report the fixes recently brought to the documentation for the BPF helpers. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904161454.31135-4-quentin@isovalent.com
2020-09-07tools: bpftool: Fix formatting in bpftool-link documentationQuentin Monnet
Fix a formatting error in the documentation for bpftool-link, so that the man page can build correctly. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904161454.31135-2-quentin@isovalent.com
2020-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-04perf tools: Make GTK2 support opt-inArnaldo Carvalho de Melo
This is bitrotting, nobody is stepping up to work on it, and since we treat warnings as errors, feature detection is failing in its main, faster test (tools/build/feature/test-all.c) because of the GTK+2 infobar check. So make this opt-in, at some point ditch this if nobody volunteers to take care of this. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf vendor events amd: Enable Family 19h users by matching Zen2 eventsKim Phillips
This enables zen3 users by reusing mostly-compatible zen2 events until the official public list of zen3 events is published in a future PPR. Signed-off-by: Kim Phillips <kim.phillips@amd.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Jon Grimm <jon.grimm@amd.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Jambor <mjambor@suse.cz> Cc: Martin Liška <mliska@suse.cz> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vijay Thakkar <vijaythakkar@me.com> Cc: William Cohen <wcohen@redhat.com> Cc: Yunfeng Ye <yeyunfeng@huawei.com> Link: http://lore.kernel.org/lkml/20200901220944.277505-4-kim.phillips@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf vendor events amd: Add recommended eventsKim Phillips
Add support for events listed in Section 2.1.15.2 "Performance Measurement" of "PPR for AMD Family 17h Model 31h B0 - 55803 Rev 0.54 - Sep 12, 2019". perf now supports these new events (-e): all_dc_accesses all_tlbs_flushed l1_dtlb_misses l2_cache_accesses_from_dc_misses l2_cache_accesses_from_ic_misses l2_cache_hits_from_dc_misses l2_cache_hits_from_ic_misses l2_cache_misses_from_dc_misses l2_cache_misses_from_ic_miss l2_dtlb_misses l2_itlb_misses sse_avx_stalls uops_dispatched uops_retired l3_accesses l3_misses and these metrics (-M): branch_misprediction_ratio all_l2_cache_accesses all_l2_cache_hits all_l2_cache_misses ic_fetch_miss_ratio l2_cache_accesses_from_l2_hwpf l2_cache_hits_from_l2_hwpf l2_cache_misses_from_l2_hwpf l3_read_miss_latency l1_itlb_misses all_remote_links_outbound nps1_die_to_dram The nps1_die_to_dram event may need perf stat's --metric-no-group switch if the number of available data fabric counters is less than the number it uses (8). Committer testing: On a AMD Ryzen 3900x system: Before: # perf list all_dc_accesses all_tlbs_flushed l1_dtlb_misses l2_cache_accesses_from_dc_misses l2_cache_accesses_from_ic_misses l2_cache_hits_from_dc_misses l2_cache_hits_from_ic_misses l2_cache_misses_from_dc_misses l2_cache_misses_from_ic_miss l2_dtlb_misses l2_itlb_misses sse_avx_stalls uops_dispatched uops_retired l3_accesses l3_misses | grep -v "^Metric Groups:$" | grep -v "^$" # After: # perf list all_dc_accesses all_tlbs_flushed l1_dtlb_misses l2_cache_accesses_from_dc_misses l2_cache_accesses_from_ic_misses l2_cache_hits_from_dc_misses l2_cache_hits_from_ic_misses l2_cache_misses_from_dc_misses l2_cache_misses_from_ic_miss l2_dtlb_misses l2_itlb_misses sse_avx_stalls uops_dispatched uops_retired l3_accesses l3_misses | grep -v "^Metric Groups:$" | grep -v "^$" | grep -v "^recommended:$" all_dc_accesses [All L1 Data Cache Accesses] all_tlbs_flushed [All TLBs Flushed] l1_dtlb_misses [L1 DTLB Misses] l2_cache_accesses_from_dc_misses [L2 Cache Accesses from L1 Data Cache Misses (including prefetch)] l2_cache_accesses_from_ic_misses [L2 Cache Accesses from L1 Instruction Cache Misses (including prefetch)] l2_cache_hits_from_dc_misses [L2 Cache Hits from L1 Data Cache Misses] l2_cache_hits_from_ic_misses [L2 Cache Hits from L1 Instruction Cache Misses] l2_cache_misses_from_dc_misses [L2 Cache Misses from L1 Data Cache Misses] l2_cache_misses_from_ic_miss [L2 Cache Misses from L1 Instruction Cache Misses] l2_dtlb_misses [L2 DTLB Misses & Data page walks] l2_itlb_misses [L2 ITLB Misses & Instruction page walks] sse_avx_stalls [Mixed SSE/AVX Stalls] uops_dispatched [Micro-ops Dispatched] uops_retired [Micro-ops Retired] l3_accesses [L3 Accesses. Unit: amd_l3] l3_misses [L3 Misses (includes Chg2X). Unit: amd_l3] # # perf stat -a -e all_dc_accesses,all_tlbs_flushed,l1_dtlb_misses,l2_cache_accesses_from_dc_misses,l2_cache_accesses_from_ic_misses,l2_cache_hits_from_dc_misses,l2_cache_hits_from_ic_misses,l2_cache_misses_from_dc_misses,l2_cache_misses_from_ic_miss,l2_dtlb_misses,l2_itlb_misses,sse_avx_stalls,uops_dispatched,uops_retired,l3_accesses,l3_misses sleep 2 Performance counter stats for 'system wide': 433,439,949 all_dc_accesses (35.66%) 443 all_tlbs_flushed (35.66%) 2,985,885 l1_dtlb_misses (35.66%) 18,318,019 l2_cache_accesses_from_dc_misses (35.68%) 50,114,810 l2_cache_accesses_from_ic_misses (35.72%) 12,423,978 l2_cache_hits_from_dc_misses (35.74%) 40,703,103 l2_cache_hits_from_ic_misses (35.74%) 6,698,673 l2_cache_misses_from_dc_misses (35.74%) 12,090,892 l2_cache_misses_from_ic_miss (35.74%) 614,267 l2_dtlb_misses (35.74%) 216,036 l2_itlb_misses (35.74%) 11,977 sse_avx_stalls (35.74%) 999,276,223 uops_dispatched (35.73%) 1,075,311,620 uops_retired (35.69%) 1,420,763 l3_accesses 540,164 l3_misses 2.002344121 seconds time elapsed # perf stat -a -e all_dc_accesses,all_tlbs_flushed,l1_dtlb_misses,l2_cache_accesses_from_dc_misses,l2_cache_accesses_from_ic_misses sleep 2 Performance counter stats for 'system wide': 175,943,104 all_dc_accesses 310 all_tlbs_flushed 2,280,359 l1_dtlb_misses 11,700,151 l2_cache_accesses_from_dc_misses 25,414,963 l2_cache_accesses_from_ic_misses 2.001957818 seconds time elapsed # Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Signed-off-by: Kim Phillips <kim.phillips@amd.com> Acked-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Jon Grimm <jon.grimm@amd.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Jambor <mjambor@suse.cz> Cc: Martin Liška <mliska@suse.cz> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vijay Thakkar <vijaythakkar@me.com> Cc: William Cohen <wcohen@redhat.com> Cc: Yunfeng Ye <yeyunfeng@huawei.com> Link: http://lore.kernel.org/lkml/20200901220944.277505-3-kim.phillips@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf vendor events amd: Add ITLB Instruction Fetch Hits event for zen1Kim Phillips
The ITLB Instruction Fetch Hits event isn't documented even in later zen1 PPRs, but it seems to count correctly on zen1 hardware. Add it to zen1 group so zen1 users can use the upcoming IC Fetch Miss Ratio Metric. The IF1G, 1IF2M, IF4K (Instruction fetches to a 1 GB, 2 MB, and 4K page) unit masks are not added because unlike zen2 hardware, zen1 hardware counts all its unit masks with a 0 unit mask according to the old convention: zen1$ perf stat -e cpu/event=0x94/,cpu/event=0x94,umask=0xff/ sleep 1 Performance counter stats for 'sleep 1': 211,318 cpu/event=0x94/u 211,318 cpu/event=0x94,umask=0xff/u Rome/zen2: zen2$ perf stat -e cpu/event=0x94/,cpu/event=0x94,umask=0xff/ sleep 1 Performance counter stats for 'sleep 1': 0 cpu/event=0x94/u 190,744 cpu/event=0x94,umask=0xff/u Signed-off-by: Kim Phillips <kim.phillips@amd.com> Acked-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> # on Zen2 only (3900x) Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Jon Grimm <jon.grimm@amd.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Jambor <mjambor@suse.cz> Cc: Martin Liška <mliska@suse.cz> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vijay Thakkar <vijaythakkar@me.com> Cc: William Cohen <wcohen@redhat.com> Cc: Yunfeng Ye <yeyunfeng@huawei.com> Link: http://lore.kernel.org/lkml/20200901220944.277505-2-kim.phillips@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf vendor events amd: Add L2 Prefetch events for zen1Kim Phillips
Later revisions of PPRs that post-date the original Family 17h events submission patch add these events. Specifically, they were not in this 2017 revision of the F17h PPR: Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors Rev 1.14 - April 15, 2017 But e.g., are included in this 2019 version of the PPR: Processor Programming Reference (PPR) for AMD Family 17h Model 18h, Revision B1 Processors Rev. 3.14 - Sep 26, 2019 Fixes: 98c07a8f74f8 ("perf vendor events amd: perf PMU events for AMD Family 17h") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Jon Grimm <jon.grimm@amd.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Jambor <mjambor@suse.cz> Cc: Martin Liška <mliska@suse.cz> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Cc: Stephane Eranian <eranian@google.com> Cc: Vijay Thakkar <vijaythakkar@me.com> Cc: William Cohen <wcohen@redhat.com> Cc: Yunfeng Ye <yeyunfeng@huawei.com> Link: http://lore.kernel.org/lkml/20200901220944.277505-1-kim.phillips@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf: ftrace: Add filter support for option -F/--funcsChangbin Du
Same as 'perf probe -F', this patch adds filter support for the ftrace subcommand option '-F, --funcs <[FILTER]>'. Here is an example that only lists functions which start with 'vfs_': $ sudo perf ftrace -F vfs_* vfs_fadvise vfs_fallocate vfs_truncate vfs_open vfs_setpos vfs_llseek vfs_readf vfs_writef ... Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Changbin Du <changbin.du@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200904152357.6053-1-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf tools: Consolidate close_control_option()'s into one functionAdrian Hunter
Consolidate control option fifo closing into one function. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Suggested-by: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200903122937.25691-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf intel-pt: Document snapshot control commandAdrian Hunter
The documentation describes snapshot mode. Update it to include the new snapshot control command. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200901093758.32293-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf annotate: Add 'ret' (intel disasm style) as an alias for 'retq'Arnaldo Carvalho de Melo
When we use the 'intel' disassembler style we get 'ret' instead of 'retq', so add that as an alias. # perf annotate --disassembler-style=intel --stdio2 acpi_processor_ffh_cstate_enter > before Apply this patch and then: # perf annotate --disassembler-style=intel --stdio2 acpi_processor_ffh_cstate_enter > after # diff -u before after --- before 2020-09-04 14:10:47.768414634 -0300 +++ after 2020-09-04 14:10:59.116681039 -0300 @@ -33,7 +33,7 @@ test al,0x8 ↓ je 97 and DWORD PTR gs:[rip+0x7e548509],0x7fffffff - 97: ret + 97: ← ret mov rax,QWORD PTR gs:0x17bc0 lock or BYTE PTR [rax+0x2],0x20 mov rax,QWORD PTR [rax] # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Matt P. Dziubinski <matdzb@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf annotate: Allow configuring the 'disassembler_style' knob via 'perf config'Arnaldo Carvalho de Melo
# perf annotate --stdio2 acpi_processor_ffh_cstate_enter > default # perf config annotate.disassembler_style=intel # perf config annotate.disassembler_style annotate.disassembler_style=intel # perf annotate --stdio2 acpi_processor_ffh_cstate_enter > intel # diff -u default intel --- default 2020-09-04 13:09:26.019205732 -0300 +++ intel 2020-09-04 13:09:52.823795081 -0300 @@ -1,42 +1,42 @@ Samples: 1K of event 'cycles', 4000 Hz, Event count (approx.): 990065316, [percent: local period] acpi_processor_ffh_cstate_enter() /lib/modules/5.9.0-rc3/build/vmlinux -Percent → callq __fentry__ - mov cpu_number,%edx - mov %edx,%edx - mov cpu_cstate_entry,%rax - add -0x7dbe9700(,%rdx,8),%rax - movzbl 0x9(%rdi),%edx - mov 0x4(%rax,%rdx,8),%edi - mov (%rax,%rdx,8),%esi - → jmpq 137ccc6 - 2d: → jmpq 137ccd8 +Percent → call __fentry__ + mov edx,DWORD PTR gs:[rip+0x7e541d74] + mov edx,edx + mov rax,QWORD PTR [rip+0x152b8fb] + add rax,QWORD PTR [rdx*8-0x7dbe9700] + movzx edx,BYTE PTR [rdi+0x9] + mov edi,DWORD PTR [rax+rdx*8+0x4] + mov esi,DWORD PTR [rax+rdx*8] + → jmp 137ccc6 + 2d: → jmp 137ccd8 mfence - mov %gs:0x17bc0,%rax - clflush (%rax) + mov rax,QWORD PTR gs:0x17bc0 + clflush BYTE PTR [rax] mfence - xor %edx,%edx - mov %rdx,%rcx - mov %gs:0x17bc0,%rax - 0.00 monitor %rax,%ecx,%edx - mov (%rax),%rax - test $0x8,%al + xor edx,edx + mov rcx,rdx + mov rax,QWORD PTR gs:0x17bc0 + 0.00 monitor + mov rax,QWORD PTR [rax] + test al,0x8 ↓ jne 71 - ↓ jmpq 68 - verw 0x538b08(%rip) # ffffffff82008150 <ds.0> - 68: mov %rsi,%rax - mov %rdi,%rcx -100.00 mwait %eax,%ecx - 71: mov %gs:0x17bc0,%rax - lock andb $0xdf,0x2(%rax) - lock addl $0x0,-0x4(%rsp) - mov (%rax),%rax - test $0x8,%al + ↓ jmp 68 + verw WORD PTR [rip+0x538b08] # ffffffff82008150 <ds.0> + 68: mov rax,rsi + mov rcx,rdi +100.00 mwait + 71: mov rax,QWORD PTR gs:0x17bc0 + lock and BYTE PTR [rax+0x2],0xdf + lock add DWORD PTR [rsp-0x4],0x0 + mov rax,QWORD PTR [rax] + test al,0x8 ↓ je 97 - andl $0x7fffffff,__preempt_count - 97: ← retq - mov %gs:0x17bc0,%rax - lock orb $0x20,0x2(%rax) - mov (%rax),%rax - test $0x8,%al + and DWORD PTR gs:[rip+0x7e548509],0x7fffffff + 97: ret + mov rax,QWORD PTR gs:0x17bc0 + lock or BYTE PTR [rax+0x2],0x20 + mov rax,QWORD PTR [rax] + test al,0x8 ↑ jne 71 - ↑ jmpq 2d + ↑ jmp 2d # Requested-by: Matt P. Dziubinski <matdzb@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04tools/memory-model: Expand the cheatsheet.txt notion of relaxedPaul E. McKenney
This commit adds a key entry enumerating the various types of relaxed operations. While in the area, it also renames the relaxed rows. [ paulmck: Apply Boqun Feng feedback. ] Acked-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-09-04perf record: Add 'snapshot' control commandAdrian Hunter
Add 'snapshot' control command to create an AUX area tracing snapshot the same as if sending SIGUSR2. The advantage of the FIFO is that access is governed by access to the FIFO. Example: $ mkfifo perf.control $ mkfifo perf.ack $ cat perf.ack & [1] 15235 $ sudo ~/bin/perf record --control fifo:perf.control,perf.ack -S -e intel_pt//u -- sleep 60 & [2] 15243 $ ps -e | grep perf 15244 pts/1 00:00:00 perf $ kill -USR2 15244 bash: kill: (15244) - Operation not permitted $ echo snapshot > perf.control ack $ Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200901093758.32293-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf tools: Add FIFO file names as alternative options to --controlAdrian Hunter
Enable the --control option to accept file names as an alternative to file descriptors. Example: $ mkfifo perf.control $ mkfifo perf.ack $ cat perf.ack & [1] 6808 $ perf record --control fifo:perf.control,perf.ack -- sleep 300 & [2] 6810 $ echo disable > perf.control $ Events disabled ack $ echo enable > perf.control $ Events enabled ack $ echo disable > perf.control $ Events disabled ack $ kill %2 [ perf record: Woken up 4 times to write data ] $ [ perf record: Captured and wrote 0.018 MB perf.data (7 samples) ] [1]- Done cat perf.ack [2]+ Terminated perf record --control fifo:perf.control,perf.ack -- sleep 300 $ Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200902105707.11491-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf tools: Use AsciiDoc formatting for --control option documentationAdrian Hunter
The --control option does not display well in man pages unless AsciiDoc formatting is used. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200901093758.32293-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf tools: Handle read errors from ctl_fdAdrian Hunter
Handle read errors from ctl_fd such as EINTR, EAGAIN and EWOULDBLOCK. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200901093758.32293-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf tools: Consolidate --control option parsing into one functionAdrian Hunter
Consolidate --control option parsing into one function, in preparation for adding FIFO file name options. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200901093758.32293-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf tests: Add test for PE binary format supportRemi Bernon
This adds a precompiled file in PE binary format, with split debug file, and tries to read its build_id and .gnu_debuglink sections, as well as looking up the main symbol from the debug file. This should succeed if libbfd is supported. Committer testing: $ perf test "PE file support" 68: PE file support : Ok $ Signed-off-by: Remi Bernon <rbernon@codeweavers.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jacek Caban <jacek@codeweavers.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200821165238.1340315-3-rbernon@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf symbols: Try reading the symbol table with libbfdRemi Bernon
Wine generates PE binaries for its code modules and also generates debug files in PE or PDB formats, which perf cannot parse either. Trying to read symbols on non-ELF binaries with libbfd, when supported, makes it possible for perf to report symbols and annotations for Windows applications running under Wine. Because libbfd doesn't provide symbol size (probably because of some backends not supporting it), we compute it by first sorting the symbols by addresses and then considering that they are sequential in a given section. v3: Also include local and weak bfd symbols and mark them as such, only global symbols were previously reported, and that caused a very imprecise address to symbol resolution. Signed-off-by: Remi Bernon <rbernon@codeweavers.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jacek Caban <jacek@codeweavers.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200821165238.1340315-2-rbernon@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04perf dso: Use libbfd to read build_id and .gnu_debuglink sectionRemi Bernon
Wine generates PE binaries for most of its modules and perf is unable to parse these files to get build_id or .gnu_debuglink section. Using libbfd when available, instead of libelf, makes it possible to resolve debug file location regardless of the dso binary format. Committer notes: Made the filename__read_build_id() variant that uses abfd->build_id depend on the feature test that defines HAVE_LIBBFD_BUILDID_SUPPORT, to get this to continue building with older libbfd/binutils. Signed-off-by: Remi Bernon <rbernon@codeweavers.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jacek Caban <jacek@codeweavers.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200821165238.1340315-1-rbernon@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04tools features: Add feature test to check if libbfd has buildid supportArnaldo Carvalho de Melo
Which is needed by the PE executable support, for instance. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jacek Caban <jacek@codeweavers.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04libbpf: Fix potential multiplication overflowAndrii Nakryiko
Detected by LGTM static analyze in Github repo, fix potential multiplication overflow before result is casted to size_t. Fixes: 8505e8709b5e ("libbpf: Implement generalized .BTF.ext func/line info adjustment") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904041611.1695163-2-andriin@fb.com
2020-09-04libbpf: Fix another __u64 cast in printfAndrii Nakryiko
Another issue of __u64 needing either %lu or %llu, depending on the architecture. Fix with cast to `unsigned long long`. Fixes: 7e06aad52929 ("libbpf: Add multi-prog section support for struct_ops") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200904041611.1695163-1-andriin@fb.com
2020-09-04tests: add waitid() tests for non-blocking pidfdsChristian Brauner
Verify that the PIDFD_NONBLOCK flag works with pidfd_open() and that waitid() with a non-blocking pidfd returns EAGAIN: TAP version 13 1..3 # Starting 3 tests from 1 test cases. # RUN global.wait_simple ... # OK global.wait_simple ok 1 global.wait_simple # RUN global.wait_states ... # OK global.wait_states ok 2 global.wait_states # RUN global.wait_nonblock ... # OK global.wait_nonblock ok 3 global.wait_nonblock # PASSED: 3 / 3 tests passed. # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Link: https://lore.kernel.org/r/20200902102130.147672-5-christian.brauner@ubuntu.com
2020-09-04mm: Add PG_arch_2 page flagSteven Price
For arm64 MTE support it is necessary to be able to mark pages that contain user space visible tags that will need to be saved/restored e.g. when swapped out. To support this add a new arch specific flag (PG_arch_2). This flag is only available on 64-bit architectures due to the limited number of spare page flags on the 32-bit ones. Signed-off-by: Steven Price <steven.price@arm.com> [catalin.marinas@arm.com: use CONFIG_64BIT for guarding this new flag] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org>
2020-09-04tests: port pidfd_wait to kselftest harnessChristian Brauner
All of the new pidfd selftests already use the new kselftest harness infrastructure. It makes for clearer output, makes the code easier to understand, and makes adding new tests way simpler. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Link: https://lore.kernel.org/r/20200902102130.147672-4-christian.brauner@ubuntu.com
2020-09-03Merge tag 'perf-tools-fixes-for-v5.9-2020-09-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools fixes from Arnaldo Carvalho de Melo: - Use uintptr_t when casting numbers to pointers - Keep output expected by 3rd parties: Turn off summary for interval mode by default. - BPF is in kernel space, make sure do_validate_kcore_modules() knows about that. - Explicitly call out event modifiers in the documentation. - Fix jevents() allocation of space for regular expressions. - Address libtraceevent build warnings on 32-bit arches. - Fix checking of functions returns using ERR_PTR() in 'perf bench'. * tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Add bpf image check to __map__is_kmodule perf record/stat: Explicitly call out event modifiers in the documentation perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new()) perf stat: Turn off summary for interval mode by default libtraceevent: Fix build warning on 32-bit arches perf jevents: Fix suspicious code in fixregex() perf parse-events: Use uintptr_t when casting numbers to pointers
2020-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
2020-09-03Merge branch 'gate-page-refcount' (patches from Dave Hansen)Linus Torvalds
Merge gate page refcount fix from Dave Hansen: "During the conversion over to pin_user_pages(), gate pages were missed. The fix is pretty simple, and is accompanied by a new test from Andy which probably would have caught this earlier" * emailed patches from Dave Hansen <dave.hansen@linux.intel.com>: selftests/x86/test_vsyscall: Improve the process_vm_readv() test mm: fix pin vs. gup mismatch with gate pages
2020-09-03selftests/x86/test_vsyscall: Improve the process_vm_readv() testAndy Lutomirski
The existing code accepted process_vm_readv() success or failure as long as it didn't return garbage. This is too weak: if the vsyscall page is readable, then process_vm_readv() should succeed and, if the page is not readable, then it should fail. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-03selftests/bpf: Add bpf_{update, delete}_map_elem in hashmap iter programYonghong Song
Added bpf_{updata,delete}_map_elem to the very map element the iter program is visiting. Due to rcu protection, the visited map elements, although stale, should still contain correct values. $ ./test_progs -n 4/18 #4/18 bpf_hash_map:OK #4 bpf_iter:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200902235341.2001534-1-yhs@fb.com
2020-09-03selftests/bpf: Fix check in global_data_init.Hao Luo
The returned value of bpf_object__open_file() should be checked with libbpf_get_error() rather than NULL. This fix prevents test_progs from crash when test_global_data.o is not present. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200903200528.747884-1-haoluo@google.com
2020-09-03selftests/bpf: Add __noinline variant of cls_redirect selftestAndrii Nakryiko
As one of the most complicated and close-to-real-world programs, cls_redirect is a good candidate to exercise libbpf's logic of handling bpf2bpf calls. So add variant with using explicit __noinline for majority of functions except few most basic ones. If those few functions are inlined, verifier starts to complain about program instruction limit of 1mln instructions being exceeded, most probably due to instruction overhead of doing a sub-program call. Convert user-space part of selftest to have to sub-tests: with and without inlining. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20200903203542.15944-15-andriin@fb.com
2020-09-03selftests/bpf: Modernize xdp_noinline test w/ skeleton and __noinlineAndrii Nakryiko
Update xdp_noinline to use BPF skeleton and force __noinline on helper sub-programs. Also, split existing logic into v4- and v6-only to complicate sub-program calling patterns (partially overlapped sets of functions for entry-level BPF programs). Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-14-andriin@fb.com
2020-09-03selftests/bpf: Add subprogs to pyperf, strobemeta, and l4lb_noinline testsAndrii Nakryiko
Add use of non-inlined subprogs to few bigger selftests to excercise libbpf's bpf2bpf handling logic. Also split l4lb_all selftest into two sub-tests. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200903203542.15944-13-andriin@fb.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 07:52:28 +0000